Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =>>>>>>>>>> INSTRUCTION IS NOT COMPLICATED - ITS VERY DETAILED (ADDRESSED TO BEGGINERS) <<<<<<<<<<<=====
- GUIDE REVISION: 1.1a
- Changes: Various changes & 10.6.6 update
- ********************
- ** Used hardware **
- ********************
- * MB : Gigabyte G31M-ES2L rev2.3 [according to spec its identical to rev2.0 but not to 1.0!]
- * CPU: Intel Core2Quad Q6600 [email protected]
- * GPU: Patriot 2x2GB OC Edition
- * GPU: nVidia GeForce 9800GT [reference]
- * HDD: WD Corp. 500GB SATA
- * ODD: Unknown LG on SATA
- * OTH: Edimax EW-7318USn - works after installing official drivers from edimax website
- Antec Fusion Remote LCD - I have no idea, doesnt work
- ************************************************
- ** I`m geek and this instructions is too long **
- ************************************************
- So if you are begginer skip this step but if you are good in Hackintosh topics follow basic steps:
- * Install retail 10.6.3
- * Update to 10.6.6 (combo, not SU)
- * Install bootloader and configure it
- * Install kexts and rebuild DSDT
- **********************
- ** Before you start **
- **********************
- Get 8GB+ pendrive and restore 10.6.3 DMG on it using Disc Utility. Next install myHack 1.1 TO USB DRIVE. Remeber to UNCHECK SleepEnabler, if you are luck or you decide to buy correct GPU you can also uncheck graphic disabler and check graphic enabler.
- Download pack of files: http://priv.ne0.pl/OSX/G31M-ES2L-1066.zip [-1055.zip has been broken, sry :(]
- Download 10.6.5 combo update from Apple website: http://support.apple.com/kb/dl1349
- **********
- ** BIOS **
- **********
- Before configuring bios insert your pendrive (now can be empty or already prepared to install)
- First load optimized default
- => Standard CMOS Features and change:
- * Drive A - None [can cause problems and none use it]
- * Halt On - No Errors [with some usb kb bios reports no kb and show "Press F1 to con..." lol :) ]
- => Advanced Bios Features
- * Enter HardDisk Boot Priority and make sure about selection [mac os hdd must be at 1st position - skip this step if you have one hdd]
- * First boot device to Hard Disk
- * Second and Third can be Disabled or whatever you wish
- * HDD SMART... recommended to be Enabled
- => Integrated Peripherals
- * On-Chip SATA mode - Enhanced
- * USB Keyboard Support - Leave Disabled (yes, I have USB kb)
- * USB Mouse Support - Leave Disabled
- * You can turn off Onboard Serial & Paralle Port for faster booting
- => Power Management Setup
- * Disable Power On by Ring
- * HPET Mode - 64 bit mode
- * If you are not using Wake On LAN Enable EUP [last entry]
- => PC Health Status
- * This settings are not required by OS X but for your safe apply it
- * CPU Warning Temp. - 70*C for Dual Core Series CPU`s, 80* for Core2Duo CPU`s and 90* for Quads
- * CPU Fan Fail Warn - Enabled
- ******************
- ** Installation **
- ******************
- Boot from already prepared pendrive [its under Hard-Drive section - not USB-HDD] using boot menu (hit F12 few times during POST check). After myHack bootloader appears press any key and type "-v" on keyboard (without " "), now just press enter.
- Wait for boot process complete, chose language and click Utilities then chose Disk Utility. Format your harddrive, remember about GUID scheme (instead of MBR).
- Close disk utility and make normal install. After it make boot from USB chosing Macintosh HD instead of Mac OS X Install DVD.
- Now install 10.6.6 combo update downloaded from Apple website, reboot using pendrive selecting Macintosh HD.
- ****************
- ** Bootloader **
- ****************
- Install Chamelon - just double click Chameleon-2RC5-b699 file and follow on-screen instruction. On last screen installer ask for logout - do it and log in again.
- Now create folders (if doesn't exists ofc): /Extra, /Extra/Extensions, /Extra/Themes
- Next, install Chameleon.prefPane double clicking it, remember to install it for all users.
- Copy "Default" folder to /Extra/Themes
- *************
- ** Drivers **
- *************
- Copy fakeSMC.kext to /Extra/Extensions
- Copy EvOrreboot.kext to /Extra/Extensions
- Copy AtherosL1cEthernet.kext to /System/Library/Extensions
- Copy VodooHda to /System/Library/Extensions
- Remove AppleHDA from /System/Library/Extensions (do not forgot to empty trash!)
- (Note: after copying anything yo /S/L/E MacOS can display warning says "you cant use system extension /path/, contact vendor blah blah blah" - just click OK and ignore for now)
- Run pfix to fix drivers permissions
- ****************
- ** ACPI Fixes **
- ****************
- To run OSX on PC you must apply some patchs to ACPI tables using DSDT files. This mb doesnt need special hacks - only auto-optimization.
- Install DSDTSE and run it (its under Application menu)
- Click Apple+D on kb [or Tools>Extract DSDT] and wait 30-40sec [program can freez]
- Click Shift+Apple+D (or Tools -> Compile DSDT)
- Click Save and DO NOT CHANGE LOCATION!
- Folder opens after 10-15sec, drag dsdt.aml file from it to /Extra
- Go to System Preferences > Chameleon
- Under Boot Flags set "Time Out" to preferred value (after this time boatload start default OS), also set "Boot Theme" to Default
- Under Peripherals set graphic mode [recomended is 1024x768x32], check Graphic Enabler, set "PciRoot" to 1 and "Force HPET"
- Under BIOS check DSDT file and chose /Extra/dsdt.aml file
- Under Advanced check generate P and C states, click show all and close window
- If your GPU also need EFi String you can put it in "EFI Inject" tab
- Click Show All button and close window.
- Now reboot and enjoy your hacMac :)
- Note: OSX has small bug - doesn't detect new lan card in userland unless you enter System Preferences > Network, so do it after reboot and your lan card magically appears (you must do it only first time after installing driver)
- **************************
- ** Whats works/what no? **
- **************************
- + 64bit mode
- + 32bit mode
- + Lan
- + GPU with QE/CL [9800GT]
- + WiFi
- + CPU
- + Reboot
- + Shutdown
- + USB (w/front)
- +/- Sound - sound is crappy, scratchy and ... hmm bad ;/ [I`m working on solution for it]
- - iMon LCD in Antec Fusion Remote case
- - Sleep
- - Build-in GPU - Intel GMA3100 (I naver searched for kexts to run it)
- *****************
- ** Author note **
- *****************
- I'm Polish so my language is not perfect but I hope that the guide would be helpful bcs I spent 21 hours testing many combinations on 10.6.5 and extra few hours to update instruction to be as perfect as possible with 10.6.6 ;)
- Feel free to contact me at [email protected]
Advertisement
Add Comment
Please, Sign In to add comment