Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.00 20121017
- In
- DDR3
- freq
- 300MHz
- config state
- pctl
- phy
- mem
- DX0DQSTR:3DB04001
- DX1DQSTR:3DB04001
- DX2DQSTR:3DB04001
- DX3DQSTR:3DB04001
- acc
- ok
- bus width=32 col=10 bank=8 row=15 CS=1 size=1024MB
- ok OUT
- BUILD=====4
- GetRemapTbl flag = 0
- OK! 60770
- unsigned!
- SecureBootEn = 0
- Boot ver: 2012-12-07#1.22
- start_linux=====73556
- 952393 Starting kernel...@0x60408000
- Uncompressing Linux... done, booting the kernel.
- Booting Linux on physical CPU 0x0
- Initializing cgroup subsys cpu
- Linux version 3.19.0-rc1-next-20141221+ (jan@borgcube) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #9 SMP Tue Dec 23 14:25:47 CET 2014
- CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Netxeon MK806 V30 - RK3066
- bootconsole [earlycon0] enabled
- Memory policy: Data cache writealloc
- On node 0 totalpages: 262144
- free_area_init_node: node 0, pgdat c0675d80, node_mem_map eeff8000
- Normal zone: 1520 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 194560 pages, LIFO batch:31
- HighMem zone: 67584 pages, LIFO batch:15
- PERCPU: Embedded 9 pages/cpu @eefd0000 s7872 r8192 d20800 u36864
- pcpu-alloc: s7872 r8192 d20800 u36864 alloc=9*4096
- pcpu-alloc: [0] 0 [0] 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
- Kernel command line: console=tty0 console=ttyS2,115200 debug earlyprintk root=/dev/mmcblk0p1 rootwait rootfstype=ext4 rw splash
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 1032436K/1048576K available (4663K kernel code, 228K rwdata, 1456K rodata, 272K init, 322K bss, 16140K reserved, 0K cma-reserved, 270336K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0601fbc (6120 kB)
- .init : 0xc0602000 - 0xc0646000 ( 272 kB)
- .data : 0xc0646000 - 0xc067f290 ( 229 kB)
- .bss : 0xc067f290 - 0xc06cfce8 ( 323 kB)
- Hierarchical RCU implementation.
- NR_IRQS:16 nr_irqs:16 16
- L2C-310 enabling early BRESP for Cortex-A9
- L2C-310: enabling full line of zeros but not enabled in Cortex-A9
- L2C-310 ID prefetch enabled, offset 15 lines
- L2C-310 dynamic clock gating enabled, standby mode enabled
- L2C-310 cache controller enabled, 16 ways, 512 kB
- L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001
- sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns
- Console: colour dummy device 80x30
- console [tty0] enabled
- Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Initializing cgroup subsys freezer
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- rockchip_smp_prepare_cpus: ncores 2
- Setting up static identity map for 0x60493c48 - 0x60493ca0
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- Brought up 2 CPUs
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- pinctrl core: initialized pinctrl subsystem
- regulator-dummy: no parameters
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- sdmmc-supply: 3000 mV
- reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
- reg-fixed-voltage sdmmc-regulator: Failed to find supply vin
- reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
- platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral
- vsys: 5000 mV
- reg-fixed-voltage vsys-regulator: vsys supplying 5000000uV
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Advanced Linux Sound Architecture Driver Initialized.
- cfg80211: Calling CRDA to update world regulatory domain
- Switched to clocksource arm_global_timer
- NET: Registered protocol family 2
- TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP: reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- futex hash table entries: 512 (order: 3, 32768 bytes)
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- fuse init (API version 7.23)
- bounce: pool size: 64 pages
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered
- io scheduler deadline registered (default)
- rockchip-usb-phy phy: Looking up phy-supply from device tree
- rockchip-usb-phy phy: Looking up phy-supply property in node /phy failed
- rockchip-usb-phy phy: Looking up phy-supply from device tree
- rockchip-usb-phy phy: Looking up phy-supply property in node /phy failed
- dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330
- dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
- dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330
- dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 23, base_baud = 1500000) is a 16550A
- dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 24, base_baud = 1500000) is a 16550A
- console [ttyS2] disabled
- dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 30, base_baud = 1500000) is a 16550A
- console [ttyS2] enabled
- console [ttyS2] enabled
- bootconsole [earlycon0] disabled
- bootconsole [earlycon0] disabled
- dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 31, base_baud = 1500000) is a 16550A
- [drm] Initialized drm 1.1.0 20060810
- brd: module loaded
- dwc2 10180000.usb: registering common handler for irq25
- dwc2 10180000.usb: mapped PA 10180000 to VA f0100000
- dwc2 10180000.usb: Looking up vusb_d-supply from device tree
- dwc2 10180000.usb: Looking up vusb_d-supply property in node /usb@10180000 failed
- 10180000.usb supply vusb_d not found, using dummy regulator
- dwc2 10180000.usb: Looking up vusb_a-supply from device tree
- dwc2 10180000.usb: Looking up vusb_a-supply property in node /usb@10180000 failed
- 10180000.usb supply vusb_a not found, using dummy regulator
- dwc2 10180000.usb: pdev 0xee8e3800
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: cfg2 = 22aa2450, cfg3 = 03cc00e8, cfg4 = dbf04060
- dwc2 10180000.usb: EPs: 9, dedicated fifos, 4480 entries in SPRAM
- dwc2 10180000.usb: GRXFSIZ=0x00000400, GNPTXFSIZ=0x00100400
- ------------[ cut here ]------------
- WARNING: CPU: 0 PID: 1 at /home/jan/devel/rk30xx/linux-next-3.19.0-rc1-next-20141221/drivers/usb/dwc2/gadget.c:213 s3c_hsotg_init_fifo+0x10c/0x1fc()
- insufficient fifo memory
- Modules linked in:
- CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc1-next-20141221+ #9
- Hardware name: Rockchip Cortex-A9 (Device Tree)
- Backtrace:
- [<c001180c>] (dump_backtrace) from [<c00119ac>] (show_stack+0x18/0x1c)
- r6:c05a8215 r5:00000009 r4:00000000 r3:00200140
- [<c0011994>] (show_stack) from [<c048edc4>] (dump_stack+0x74/0x90)
- [<c048ed50>] (dump_stack) from [<c00215c8>] (warn_slowpath_common+0x8c/0xb4)
- r4:00000000 r3:c0656260
- [<c002153c>] (warn_slowpath_common) from [<c0021694>] (warn_slowpath_fmt+0x38/0x40)
- r8:03001000 r7:c0676af5 r6:00000114 r5:00001300 r4:eea3c810
- [<c0021660>] (warn_slowpath_fmt) from [<c02db714>] (s3c_hsotg_init_fifo+0x10c/0x1fc)
- r3:00000000 r2:c05a8409
- [<c02db608>] (s3c_hsotg_init_fifo) from [<c02db8e8>] (s3c_hsotg_init+0xe4/0x140)
- r10:eea3c848 r9:c06438f8 r8:ee810280 r7:00000000 r6:c064e444 r5:f0100000
- r4:eea3c810 r3:c0656260
- [<c02db804>] (s3c_hsotg_init) from [<c02dc33c>] (dwc2_gadget_init+0x218/0x60c)
- r6:00000019 r5:ee8e3810 r4:eea3c810
- [<c02dc124>] (dwc2_gadget_init) from [<c02df45c>] (dwc2_driver_probe+0x1c4/0x1fc)
- r10:c06025f0 r9:c06438f8 r8:ee8e0380 r7:00000019 r6:ee8e3810 r5:ee8e3800
- r4:eea3c810
- [<c02df298>] (dwc2_driver_probe) from [<c0289470>] (platform_drv_probe+0x50/0x98)
- r8:c0651998 r7:00000000 r6:c0667744 r5:ee8e3810 r4:ffffffed
- [<c0289420>] (platform_drv_probe) from [<c0287c70>] (driver_probe_device+0x14c/0x35c)
- r6:00000000 r5:c0667744 r4:ee8e3810 r3:c0289420
- [<c0287b24>] (driver_probe_device) from [<c0287ee8>] (__driver_attach+0x68/0x8c)
- r7:00000000 r6:c0667744 r5:ee8e3844 r4:ee8e3810
- [<c0287e80>] (__driver_attach) from [<c028628c>] (bus_for_each_dev+0x5c/0x94)
- r6:c0287e80 r5:ee859e48 r4:c0667744 r3:c0287e80
- [<c0286230>] (bus_for_each_dev) from [<c0287674>] (driver_attach+0x20/0x28)
- r7:00000000 r6:c0665020 r5:eeaa1e80 r4:c0667744
- [<c0287654>] (driver_attach) from [<c0287290>] (bus_add_driver+0xd8/0x1f4)
- [<c02871b8>] (bus_add_driver) from [<c02885e4>] (driver_register+0xa4/0xe8)
- r7:c0651998 r6:00000000 r5:eea3e380 r4:c0667744
- [<c0288540>] (driver_register) from [<c02892f8>] (__platform_driver_register+0x50/0x64)
- r5:eea3e380 r4:c061e340
- [<c02892a8>] (__platform_driver_register) from [<c061e358>] (dwc2_platform_driver_init+0x18/0x20)
- [<c061e340>] (dwc2_platform_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0)
- [<c0008930>] (do_one_initcall) from [<c0602df0>] (kernel_init_freeable+0x10c/0x1d8)
- r9:c06438f8 r8:0000009b r7:c067f2c0 r6:c06374b8 r5:c06374d8 r4:00000006
- [<c0602ce4>] (kernel_init_freeable) from [<c048c0e8>] (kernel_init+0x10/0xec)
- r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c048c0d8
- r4:00000000
- [<c048c0d8>] (kernel_init) from [<c000eb18>] (ret_from_fork+0x14/0x3c)
- r4:00000000 r3:ee858000
- ---[ end trace a647614deebbbf70 ]---
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: DCFG=0x08200000, DCTL=0x00000002, DIEPMSK=0000000f
- dwc2 10180000.usb: GAHBCFG=0x00000000, 0x44=0x00006664
- dwc2 10180000.usb: GRXFSIZ=0x00000000, GNPTXFSIZ=0x04000000
- dwc2 10180000.usb: DPTx[1] FSize=256, StAddr=0x00000c00
- dwc2 10180000.usb: DPTx[2] FSize=256, StAddr=0x00000500
- dwc2 10180000.usb: DPTx[3] FSize=256, StAddr=0x00000600
- dwc2 10180000.usb: DPTx[4] FSize=256, StAddr=0x00000700
- dwc2 10180000.usb: DPTx[5] FSize=256, StAddr=0x00000000
- dwc2 10180000.usb: DPTx[6] FSize=256, StAddr=0x00000300
- dwc2 10180000.usb: DPTx[7] FSize=0, StAddr=0x00000000
- dwc2 10180000.usb: DPTx[8] FSize=0, StAddr=0x00000000
- dwc2 10180000.usb: DPTx[9] FSize=256, StAddr=0x00000c00
- dwc2 10180000.usb: DPTx[10] FSize=256, StAddr=0x00000500
- dwc2 10180000.usb: DPTx[11] FSize=256, StAddr=0x00000600
- dwc2 10180000.usb: DPTx[12] FSize=256, StAddr=0x00000700
- dwc2 10180000.usb: DPTx[13] FSize=256, StAddr=0x00000000
- dwc2 10180000.usb: DPTx[14] FSize=256, StAddr=0x00000300
- dwc2 10180000.usb: DPTx[15] FSize=0, StAddr=0x00000000
- dwc2 10180000.usb: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x47a43b38
- dwc2 10180000.usb: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0xee62fd9a
- dwc2 10180000.usb: ep1-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x91d1ff84
- dwc2 10180000.usb: ep1-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep2-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xecb16c59
- dwc2 10180000.usb: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x55baa69d
- dwc2 10180000.usb: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep4-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep4-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x6c14a4b4
- dwc2 10180000.usb: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x44e0daa2
- dwc2 10180000.usb: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xe731cbd4
- dwc2 10180000.usb: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xee80d970
- dwc2 10180000.usb: ep7-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep8-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x06469555
- dwc2 10180000.usb: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x5c47bf6c
- dwc2 10180000.usb: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xabd06177
- dwc2 10180000.usb: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xbd11f561
- dwc2 10180000.usb: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep11-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0ef46df2
- dwc2 10180000.usb: ep14-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0xaf1d13a1
- dwc2 10180000.usb: DVBUSDIS=0x00000b8f, DVBUSPULSE=000002c6
- dwc2 101c0000.usb: registering common handler for irq26
- dwc2 101c0000.usb: mapped PA 101c0000 to VA f0180000
- dwc2 101c0000.usb: no platform data or transceiver defined
- platform 101c0000.usb: Driver dwc2 requests probe deferral
- using random self ethernet address
- using random host ethernet address
- usb0: HOST MAC 82:7a:77:e5:01:f5
- usb0: MAC ee:94:75:98:27:cc
- using random self ethernet address
- using random host ethernet address
- g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
- g_ether gadget: g_ether ready
- dwc2 10180000.usb: pdev 0xee8e3800
- dwc2 10180000.usb: GRXFSIZ=0x00000000, GNPTXFSIZ=0x04000000
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: bound driver g_ether
- dwc2 10180000.usb: s3c_hsotg_pullup: is_on: 1
- mousedev: PS/2 mouse device common for all mice
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- i2c /dev entries driver
- vcc_rtc: override min_uV, 1 -> 1800000
- vcc_rtc: override max_uV, 2147483647 -> 1800000
- vcc_rtc: 1800 mV
- tps65910 1-002d: Looking up vcc7-supply from device tree
- vcc_rtc: supplied by vsys
- vcc_io: at 3300 mV
- tps65910 1-002d: Looking up vccio-supply from device tree
- vcc_io: supplied by vsys
- vdd_arm: 600 <--> 1500 mV at 1200 mV
- tps65910 1-002d: Looking up vcc1-supply from device tree
- vdd_arm: supplied by vsys
- vcc_ddr: 600 <--> 1500 mV at 1200 mV
- tps65910 1-002d: Looking up vcc2-supply from device tree
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: s3c_hsotg_irq: 0480a028 00002000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x003b2800)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- vcc_ddr: supplied by vsys
- vdd3: override min_uV, 1 -> 5000000
- vdd3: override max_uV, 2147483647 -> 5000000
- vdd3: 5000 mV
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x010c0080 (8@0)
- dwc2 10180000.usb: SetupRX (Frame=0x00003d68, DOPEPCTL=0x80028000)
- dwc2 10180000.usb: s3c_hsotg_rx_data: read 8/8, done 0/8
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 7
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x01080000 (0@0)
- dwc2 10180000.usb: SetupDone (Frame=0x00003e21, DOPEPCTL=0x00028000)
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, 0 => c02ddea4
- dwc2 10180000.usb: ctrl Req=06, Type=80, V=0100, L=0040
- dwc2 10180000.usb: ctrl: dir_in=1
- dwc2 10180000.usb: ep0: req eeaa2900: 18@eeaa5c00, noi=0, zero=1, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir in
- dwc2 10180000.usb: ureq->length:18 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@18/18, 0x00080012 => 0x00000910
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_write_fifo: GNPTXSTS=00080400, can=4096, to=18, max_transfer 64
- dwc2 10180000.usb: write 18/18, can_write 512, done 0
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 048c8028 000c0000 (d00c3cd4) retry 6
- dwc2 10180000.usb: s3c_hsotg_irq: daint=00010001
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(out) DxEPINT=0x00002018
- dwc2 10180000.usb: s3c_hsotg_epint: Setup/Timeout
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(in) DxEPINT=0x000020c1
- dwc2 10180000.usb: s3c_hsotg_epint: XferCompl: DxEPCTL=0x00008000, DXEPTSIZ=00000000
- dwc2 10180000.usb: req->length:18 req->actual:18 req->zero:1
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2900, 0 => c02e1368
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_epint: B2BSetup/INEPNakEff
- dwc2 10180000.usb: s3c_hsotg_epint: ep0: TxFIFOEmpty
- vcc18_cif: at 1800 mV
- tps65910 1-002d: Looking up vcc6-supply from device tree
- vcc18_cif: supplied by vcc_io
- vdd_11: at 1200 mV
- tps65910 1-002d: Looking up vcc6-supply from device tree
- vdd_11: supplied by vcc_io
- vcc_25: at 2500 mV
- tps65910 1-002d: Looking up vcc5-supply from device tree
- vcc_25: supplied by vcc_io
- vcc_18: at 1800 mV
- tps65910 1-002d: Looking up vcc5-supply from device tree
- vcc_18: supplied by vcc_io
- vcc25_hdmi: at 2800 mV
- tps65910 1-002d: Looking up vcc4-supply from device tree
- vcc25_hdmi: supplied by vsys
- vcca_33: at 3300 mV
- tps65910 1-002d: Looking up vcc4-supply from device tree
- vcca_33: supplied by vsys
- vcc_rmii: at 3300 mV
- tps65910 1-002d: Looking up vcc3-supply from device tree
- vcc_rmii: supplied by vsys
- vcc28_cif: at 3000 mV
- tps65910 1-002d: Looking up vcc3-supply from device tree
- vcc28_cif: supplied by vsys
- vbb: at 3000 mV
- tps65910 1-002d: Looking up vcc7-supply from device tree
- vbb: supplied by vsys
- rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f009e000
- softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- Driver 'mmcblk' needs updating - please use bus_type methods
- Synopsys Designware Multimedia Card Interface Driver
- dwmmc_rockchip 10214000.dwmmc: IDMAC supports 32-bit address mode.
- dwmmc_rockchip 10214000.dwmmc: Using PIO mode.
- dwmmc_rockchip 10214000.dwmmc: Version ID is 240a
- dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 27, 32 bit host data width, 256 deep fifo
- dwmmc_rockchip 10214000.dwmmc: Looking up vmmc-supply from device tree
- dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply from device tree
- dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@10214000 failed
- platform 10214000.dwmmc: Driver dwmmc_rockchip requests probe deferral
- hidraw: raw HID events driver (C) Jiri Kosina
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP: cubic registered
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- Key type dns_resolver registered
- Registering SWP/SWPB emulation handler
- sdmmc-supply: 3000 mV
- reg-fixed-voltage sdmmc-regulator: Looking up vin-supply from device tree
- sdmmc-supply: supplied by vcc_io
- reg-fixed-voltage sdmmc-regulator: sdmmc-supply supplying 3000000uV
- dwc2 101c0000.usb: registering common handler for irq26
- dwc2 101c0000.usb: mapped PA 101c0000 to VA f0200000
- dwc2 101c0000.usb: no platform data or transceiver defined
- platform 101c0000.usb: Driver dwc2 requests probe deferral
- dwmmc_rockchip 10214000.dwmmc: IDMAC supports 32-bit address mode.
- dwmmc_rockchip 10214000.dwmmc: Using PIO mode.
- dwmmc_rockchip 10214000.dwmmc: Version ID is 240a
- dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 27, 32 bit host data width, 256 deep fifo
- dwmmc_rockchip 10214000.dwmmc: Looking up vmmc-supply from device tree
- dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply from device tree
- dwmmc_rockchip 10214000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@10214000 failed
- dwmmc_rockchip 10214000.dwmmc: No vqmmc regulator found
- dwmmc_rockchip 10214000.dwmmc: 1 slots initialized
- dwc2 101c0000.usb: registering common handler for irq26
- dwc2 101c0000.usb: mapped PA 101c0000 to VA f0280000
- dwc2 101c0000.usb: no platform data or transceiver defined
- platform 101c0000.usb: Driver dwc2 requests probe deferral
- /home/jan/devel/rk30xx/linux-next-3.19.0-rc1-next-20141221/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- sdmmc-supply: disabling
- vcc_rmii: disabling
- ALSA device list:
- No soundcards found.
- Waiting for root device /dev/mmcblk0p1...
- dwc2 10180000.usb: s3c_hsotg_irq: 04808428 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: s3c_hsotg_irq: 0480b028 00003000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x0019df00)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, -104 => c02ddea4
- dwc2 10180000.usb: s3c_hsotg_complete_setup: failed -104
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, -104 => c02ddea4
- dwc2 10180000.usb: s3c_hsotg_complete_setup: failed -104
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: s3c_hsotg_irq: 0480a028 00002000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x0030a500)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x012c0080 (8@0)
- dwc2 10180000.usb: SetupRX (Frame=0x000032a9, DOPEPCTL=0x80028000)
- dwc2 10180000.usb: s3c_hsotg_rx_data: read 8/8, done 0/8
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 7
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x01280000 (0@0)
- dwc2 10180000.usb: SetupDone (Frame=0x00003361, DOPEPCTL=0x00028000)
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, 0 => c02ddea4
- dwc2 10180000.usb: ctrl Req=06, Type=80, V=0100, L=0040
- dwc2 10180000.usb: ctrl: dir_in=1
- dwc2 10180000.usb: ep0: req eeaa2900: 18@eeaa5c00, noi=0, zero=1, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir in
- dwc2 10180000.usb: ureq->length:18 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@18/18, 0x00080012 => 0x00000910
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_write_fifo: GNPTXSTS=00080400, can=4096, to=18, max_transfer 64
- dwc2 10180000.usb: write 18/18, can_write 512, done 0
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 048c8028 000c0000 (d00c3cd4) retry 6
- dwc2 10180000.usb: s3c_hsotg_irq: daint=00010001
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(out) DxEPINT=0x00002018
- dwc2 10180000.usb: s3c_hsotg_epint: Setup/Timeout
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(in) DxEPINT=0x000020c1
- dwc2 10180000.usb: s3c_hsotg_epint: XferCompl: DxEPCTL=0x00008000, DXEPTSIZ=00000000
- dwc2 10180000.usb: req->length:18 req->actual:18 req->zero:1
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2900, 0 => c02e1368
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_epint: B2BSetup/INEPNakEff
- dwc2 10180000.usb: s3c_hsotg_epint: ep0: TxFIFOEmpty
- dwc2 10180000.usb: s3c_hsotg_irq: 04808428 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: s3c_hsotg_irq: 0480b028 00003000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x000f2000)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, -104 => c02ddea4
- dwc2 10180000.usb: s3c_hsotg_complete_setup: failed -104
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, -104 => c02ddea4
- dwc2 10180000.usb: s3c_hsotg_complete_setup: failed -104
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: s3c_hsotg_irq: 0480a028 00002000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x0025e500)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x010c0080 (8@0)
- dwc2 10180000.usb: SetupRX (Frame=0x000027e8, DOPEPCTL=0x80028000)
- dwc2 10180000.usb: s3c_hsotg_rx_data: read 8/8, done 0/8
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 7
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x01080000 (0@0)
- dwc2 10180000.usb: SetupDone (Frame=0x000028a1, DOPEPCTL=0x00028000)
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, 0 => c02ddea4
- dwc2 10180000.usb: ctrl Req=06, Type=80, V=0100, L=0040
- dwc2 10180000.usb: ctrl: dir_in=1
- dwc2 10180000.usb: ep0: req eeaa2900: 18@eeaa5c00, noi=0, zero=1, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir in
- dwc2 10180000.usb: ureq->length:18 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@18/18, 0x00080012 => 0x00000910
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_write_fifo: GNPTXSTS=00080400, can=4096, to=18, max_transfer 64
- dwc2 10180000.usb: write 18/18, can_write 512, done 0
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 048c8028 000c0000 (d00c3cd4) retry 6
- dwc2 10180000.usb: s3c_hsotg_irq: daint=00010001
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(out) DxEPINT=0x00002018
- dwc2 10180000.usb: s3c_hsotg_epint: Setup/Timeout
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(in) DxEPINT=0x000020c1
- dwc2 10180000.usb: s3c_hsotg_epint: XferCompl: DxEPCTL=0x00008000, DXEPTSIZ=00000000
- dwc2 10180000.usb: req->length:18 req->actual:18 req->zero:1
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2900, 0 => c02e1368
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_epint: B2BSetup/INEPNakEff
- dwc2 10180000.usb: s3c_hsotg_epint: ep0: TxFIFOEmpty
- dwc2 10180000.usb: s3c_hsotg_irq: 04808428 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: s3c_hsotg_irq: 0480b028 00003000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x00046000)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, -104 => c02ddea4
- dwc2 10180000.usb: s3c_hsotg_complete_setup: failed -104
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, -104 => c02ddea4
- dwc2 10180000.usb: s3c_hsotg_complete_setup: failed -104
- dwc2 10180000.usb: resetting core
- dwc2 10180000.usb: reset successful
- dwc2 10180000.usb: FIFOs reset, timeout at 99
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
- dwc2 10180000.usb: gsintmsk now 0xd00c3cc4
- dwc2 10180000.usb: gsintmsk now 0xd00c3cd4
- dwc2 10180000.usb: DCTL=0x00000002
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x80008000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84008000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04008420 00000400 (d00c3cd4) retry 8
- dwc2 10180000.usb: GINTSTS_ErlySusp
- dwc2 10180000.usb: gintsts=04008820 gintmsk=d00c3cd4
- dwc2 10180000.usb: USB SUSPEND
- dwc2 10180000.usb: DSTS=0x3
- dwc2 10180000.usb: DSTS.Suspend Status=1 HWCFG4.Power Optimize=0
- dwc2 10180000.usb: s3c_hsotg_irq: 04008020 00000000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: 04809020 00001000 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_irq: USBRst
- dwc2 10180000.usb: GNPTXSTS=00080400
- dwc2 10180000.usb: s3c_hsotg_irq: 0480a028 00002000 (d00c3cd4) retry 8
- dwc2 10180000.usb: EnumDone (DSTS=0x001b2600)
- dwc2 10180000.usb: new device is high-speed
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup already queued???
- dwc2 10180000.usb: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 8
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x012c0080 (8@0)
- dwc2 10180000.usb: SetupRX (Frame=0x00001d2a, DOPEPCTL=0x80028000)
- dwc2 10180000.usb: s3c_hsotg_rx_data: read 8/8, done 0/8
- dwc2 10180000.usb: s3c_hsotg_irq: 04808038 00000010 (d00c3cd4) retry 7
- dwc2 10180000.usb: s3c_hsotg_handle_rx: GRXSTSP=0x01280000 (0@0)
- dwc2 10180000.usb: SetupDone (Frame=0x00001de2, DOPEPCTL=0x00028000)
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2d40, 0 => c02ddea4
- dwc2 10180000.usb: ctrl Req=06, Type=80, V=0100, L=0040
- dwc2 10180000.usb: ctrl: dir_in=1
- dwc2 10180000.usb: ep0: req eeaa2900: 18@eeaa5c00, noi=0, zero=1, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir in
- dwc2 10180000.usb: ureq->length:18 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@18/18, 0x00080012 => 0x00000910
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_write_fifo: GNPTXSTS=00080400, can=4096, to=18, max_transfer 64
- dwc2 10180000.usb: write 18/18, can_write 512, done 0
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_irq: 048c8028 000c0000 (d00c3cd4) retry 6
- dwc2 10180000.usb: s3c_hsotg_irq: daint=00010001
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(out) DxEPINT=0x00002018
- dwc2 10180000.usb: s3c_hsotg_epint: Setup/Timeout
- dwc2 10180000.usb: s3c_hsotg_epint: ep0(in) DxEPINT=0x000020c1
- dwc2 10180000.usb: s3c_hsotg_epint: XferCompl: DxEPCTL=0x00008000, DXEPTSIZ=00000000
- dwc2 10180000.usb: req->length:18 req->actual:18 req->zero:1
- dwc2 10180000.usb: complete: ep eea3c400 ep0, req eeaa2900, 0 => c02e1368
- dwc2 10180000.usb: s3c_hsotg_enqueue_setup: queueing setup request
- dwc2 10180000.usb: ep0: req eeaa2d40: 8@eea3c90c, noi=0, zero=0, snok=0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x00028000, ep 0, dir out
- dwc2 10180000.usb: ureq->length:8 ureq->actual:0
- dwc2 10180000.usb: s3c_hsotg_start_req: 1@8/8, 0x00080008 => 0x00000b10
- dwc2 10180000.usb: setup req:0
- dwc2 10180000.usb: s3c_hsotg_start_req: DxEPCTL=0x84028000
- dwc2 10180000.usb: s3c_hsotg_start_req: DXEPCTL=0x80008000
- dwc2 10180000.usb: s3c_hsotg_epint: B2BSetup/INEPNakEff
- dwc2 10180000.usb: s3c_hsotg_epint: ep0: TxFIFOEmpty
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement