Pastebin launched a little side project called HostCabi.net, check it out ;-)Don't like ads? PRO users don't see any ads ;-)
Guest

sudo smartctl -a /dev/sdX (on AC)

By: mysterio on May 29th, 2012  |  syntax: None  |  size: 9.63 KB  |  hits: 72  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-24-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Western Digital Scorpio Blue Serial ATA
  6. Device Model:     WDC WD2500BEVS-60UST0
  7. Serial Number:    WD-WXE708H75194
  8. LU WWN Device Id: 5 0014ee 2571ceeec
  9. Firmware Version: 01.01A01
  10. User Capacity:    250,059,350,016 bytes [250 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Device is:        In smartctl database [for details use: -P show]
  13. ATA Version is:   8
  14. ATA Standard is:  Exact ATA specification draft version not indicated
  15. Local Time is:    Tue May 29 16:46:56 2012 GMT
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21. See vendor-specific Attribute list for marginal Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x80) Offline data collection activity
  25.                                         was never started.
  26.                                         Auto Offline Data Collection: Enabled.
  27. Self-test execution status:      (   0) The previous self-test routine completed
  28.                                         without error or no self-test has ever
  29.                                         been run.
  30. Total time to complete Offline
  31. data collection:                ( 9600) seconds.
  32. Offline data collection
  33. capabilities:                    (0x5b) SMART execute Offline immediate.
  34.                                         Auto Offline data collection on/off support.
  35.                                         Suspend Offline collection upon new
  36.                                         command.
  37.                                         Offline surface scan supported.
  38.                                         Self-test supported.
  39.                                         No Conveyance Self-test supported.
  40.                                         Selective Self-test supported.
  41. SMART capabilities:            (0x0003) Saves SMART data before entering
  42.                                         power-saving mode.
  43.                                         Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                                         General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:        (   2) minutes.
  48. Extended self-test routine
  49. recommended polling time:        ( 115) minutes.
  50. SCT capabilities:              (0x303f) SCT Status supported.
  51.                                         SCT Error Recovery Control supported.
  52.                                         SCT Feature Control supported.
  53.                                         SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       13
  59.   3 Spin_Up_Time            0x0027   188   187   021    Pre-fail  Always       -       1558
  60.   4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5544
  61.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  62.   7 Seek_Error_Rate         0x002f   100   253   051    Pre-fail  Always       -       0
  63.   9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       5333
  64.  10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
  65.  11 Calibration_Retry_Count 0x0032   100   100   051    Old_age   Always       -       0
  66.  12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4009
  67. 187 Reported_Uncorrect      0x0032   100   094   000    Old_age   Always       -       6
  68. 188 Command_Timeout         0x0032   100   001   000    Old_age   Always       -       8590066004
  69. 190 Airflow_Temperature_Cel 0x0022   054   035   040    Old_age   Always   In_the_past 46
  70. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       705
  71. 193 Load_Cycle_Count        0x0032   185   185   000    Old_age   Always       -       45070
  72. 194 Temperature_Celsius     0x0022   101   082   000    Old_age   Always       -       46
  73. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  74. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  75. 198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
  76. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
  77. 200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0
  78.  
  79. SMART Error Log Version: 1
  80. ATA Error Count: 9 (device log contains only the most recent five errors)
  81.         CR = Command Register [HEX]
  82.         FR = Features Register [HEX]
  83.         SC = Sector Count Register [HEX]
  84.         SN = Sector Number Register [HEX]
  85.         CL = Cylinder Low Register [HEX]
  86.         CH = Cylinder High Register [HEX]
  87.         DH = Device/Head Register [HEX]
  88.         DC = Device Command Register [HEX]
  89.         ER = Error register [HEX]
  90.         ST = Status register [HEX]
  91. Powered_Up_Time is measured from power on, and printed as
  92. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  93. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  94.  
  95. Error 9 occurred at disk power-on lifetime: 2948 hours (122 days + 20 hours)
  96.   When the command that caused the error occurred, the device was active or idle.
  97.  
  98.   After command completion occurred, registers were:
  99.   ER ST SC SN CL CH DH
  100.   -- -- -- -- -- -- --
  101.   40 51 08 f8 14 4d 40  Error: UNC 8 sectors at LBA = 0x004d14f8 = 5051640
  102.  
  103.   Commands leading to the command that caused the error were:
  104.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  105.   -- -- -- -- -- -- -- --  ----------------  --------------------
  106.   25 00 08 f8 14 4d 01 00      00:40:58.568  READ DMA EXT
  107.   25 00 08 a0 19 4d 01 00      00:40:58.464  READ DMA EXT
  108.   25 00 01 30 c8 96 0d 00      00:40:57.724  READ DMA EXT
  109.   25 00 50 e0 c7 96 0d 00      00:40:57.723  READ DMA EXT
  110.   25 00 08 d8 c7 96 0d 00      00:40:57.718  READ DMA EXT
  111.  
  112. Error 8 occurred at disk power-on lifetime: 1978 hours (82 days + 10 hours)
  113.   When the command that caused the error occurred, the device was active or idle.
  114.  
  115.   After command completion occurred, registers were:
  116.   ER ST SC SN CL CH DH
  117.   -- -- -- -- -- -- --
  118.   10 51 38 a8 83 5d 40  Error: IDNF 56 sectors at LBA = 0x005d83a8 = 6128552
  119.  
  120.   Commands leading to the command that caused the error were:
  121.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  122.   -- -- -- -- -- -- -- --  ----------------  --------------------
  123.   35 00 38 a8 83 5d 00 00      02:46:43.558  WRITE DMA EXT
  124.   25 00 40 1e 60 1d 1a 00      02:46:42.431  READ DMA EXT
  125.   25 00 f8 26 5f 1d 1a 00      02:46:42.252  READ DMA EXT
  126.   25 00 08 1e 5f 1d 1a 00      02:46:42.252  READ DMA EXT
  127.   25 00 69 66 eb 6f 16 00      02:46:42.241  READ DMA EXT
  128.  
  129. Error 7 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  130.   When the command that caused the error occurred, the device was active or idle.
  131.  
  132.   After command completion occurred, registers were:
  133.   ER ST SC SN CL CH DH
  134.   -- -- -- -- -- -- --
  135.   01 51 78 78 8a de e0  Error: AMNF at LBA = 0x00de8a78 = 14584440
  136.  
  137.   Commands leading to the command that caused the error were:
  138.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  139.   -- -- -- -- -- -- -- --  ----------------  --------------------
  140.   29 ff 78 78 8a de 18 00      00:00:43.013  READ MULTIPLE EXT
  141.   25 ff 78 78 8a de 18 00      00:00:38.486  READ DMA EXT
  142.   29 ff 78 78 8a de 18 00      00:00:34.503  READ MULTIPLE EXT
  143.   25 ff 78 78 8a de 18 00      00:00:30.519  READ DMA EXT
  144.   29 ff 78 78 8a de 18 00      00:00:25.970  READ MULTIPLE EXT
  145.  
  146. Error 6 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  147.   When the command that caused the error occurred, the device was active or idle.
  148.  
  149.   After command completion occurred, registers were:
  150.   ER ST SC SN CL CH DH
  151.   -- -- -- -- -- -- --
  152.   01 51 78 78 8a de e0  Error: AMNF 120 sectors at LBA = 0x00de8a78 = 14584440
  153.  
  154.   Commands leading to the command that caused the error were:
  155.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  156.   -- -- -- -- -- -- -- --  ----------------  --------------------
  157.   25 ff 78 78 8a de 18 00      00:00:38.486  READ DMA EXT
  158.   29 ff 78 78 8a de 18 00      00:00:34.503  READ MULTIPLE EXT
  159.   25 ff 78 78 8a de 18 00      00:00:30.519  READ DMA EXT
  160.   29 ff 78 78 8a de 18 00      00:00:25.970  READ MULTIPLE EXT
  161.   25 ff 78 78 8a de 18 00      00:00:21.448  READ DMA EXT
  162.  
  163. Error 5 occurred at disk power-on lifetime: 1425 hours (59 days + 9 hours)
  164.   When the command that caused the error occurred, the device was active or idle.
  165.  
  166.   After command completion occurred, registers were:
  167.   ER ST SC SN CL CH DH
  168.   -- -- -- -- -- -- --
  169.   01 51 78 78 8a de e0  Error: AMNF at LBA = 0x00de8a78 = 14584440
  170.  
  171.   Commands leading to the command that caused the error were:
  172.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  173.   -- -- -- -- -- -- -- --  ----------------  --------------------
  174.   29 ff 78 78 8a de 18 00      00:00:34.503  READ MULTIPLE EXT
  175.   25 ff 78 78 8a de 18 00      00:00:30.519  READ DMA EXT
  176.   29 ff 78 78 8a de 18 00      00:00:25.970  READ MULTIPLE EXT
  177.   25 ff 78 78 8a de 18 00      00:00:21.448  READ DMA EXT
  178.   25 ff 78 00 8a de 18 00      00:00:21.447  READ DMA EXT
  179.  
  180. SMART Self-test log structure revision number 1
  181. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  182. # 1  Short offline       Completed without error       00%      5207         -
  183. # 2  Short offline       Completed without error       00%      3714         -
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  187.     1        0        0  Not_testing
  188.     2        0        0  Not_testing
  189.     3        0        0  Not_testing
  190.     4        0        0  Not_testing
  191.     5        0        0  Not_testing
  192. Selective self-test flags (0x0):
  193.   After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.