Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-31-generic-pae] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar SE
- Device Model: WDC WD1600JB-00GVA0
- Serial Number: WD-WCAL91665091
- Firmware Version: 08.02D08
- User Capacity: 160,041,885,696 bytes [160 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 6
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sun Oct 7 15:47:38 2012 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x85) Offline data collection activity
- was aborted by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 4635) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 62) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 200 161 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0007 188 165 021 Pre-fail Always - 3141
- 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 369
- 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1
- 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 009 009 000 Old_age Always - 66733
- 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 369
- 194 Temperature_Celsius 0x0022 100 092 000 Old_age Always - 50
- 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
- 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 6
- 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0009 188 076 051 Pre-fail Offline - 385
- SMART Error Log Version: 1
- ATA Error Count: 75 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 75 occurred at disk power-on lifetime: 17763 hours (740 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 98 4f c1 41 f0 Error: UNC at LBA = 0x0041c14f = 4309327
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 24 00 98 4f c1 41 06 00 13d+13:13:01.500 READ SECTOR(S) EXT
- 10 00 3f 00 00 00 00 00 13d+13:13:01.500 RECALIBRATE [OBS-4]
- 24 00 98 4f c1 41 06 00 13d+13:13:01.500 READ SECTOR(S) EXT
- 24 00 98 4f c1 41 06 00 13d+13:13:01.500 READ SECTOR(S) EXT
- Error 74 occurred at disk power-on lifetime: 17763 hours (740 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 98 4f c1 41 f0 Error: AMNF at LBA = 0x0041c14f = 4309327
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 24 00 98 4f c1 41 06 00 13d+13:12:59.100 READ SECTOR(S) EXT
- 24 00 98 4f c1 41 06 00 13d+13:12:59.100 READ SECTOR(S) EXT
- Error 73 occurred at disk power-on lifetime: 17763 hours (740 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 98 4f c1 41 f0 Error: AMNF at LBA = 0x0041c14f = 4309327
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 24 00 98 4f c1 41 06 00 13d+13:12:56.650 READ SECTOR(S) EXT
- Error 72 occurred at disk power-on lifetime: 17763 hours (740 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 98 4f c1 41 f0 Error: AMNF at LBA = 0x0041c14f = 4309327
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 29 00 98 4f c1 41 06 00 13d+13:12:54.300 READ MULTIPLE EXT
- 29 00 98 4f c1 41 06 00 13d+13:12:54.300 READ MULTIPLE EXT
- 10 00 3f 00 00 00 00 00 13d+13:12:54.300 RECALIBRATE [OBS-4]
- 29 00 98 4f c1 41 06 00 13d+13:12:54.300 READ MULTIPLE EXT
- 29 00 f8 ef c0 41 06 00 13d+13:12:54.300 READ MULTIPLE EXT
- Error 71 occurred at disk power-on lifetime: 17763 hours (740 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 98 4f c1 41 f0 Error: AMNF at LBA = 0x0041c14f = 4309327
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 29 00 98 4f c1 41 06 00 13d+13:12:51.950 READ MULTIPLE EXT
- 10 00 3f 00 00 00 00 00 13d+13:12:51.950 RECALIBRATE [OBS-4]
- 29 00 98 4f c1 41 06 00 13d+13:12:51.950 READ MULTIPLE EXT
- 29 00 f8 ef c0 41 06 00 13d+13:12:51.950 READ MULTIPLE EXT
- c6 00 10 00 00 00 00 00 13d+13:12:51.950 SET MULTIPLE MODE
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement