Guest User

Untitled

a guest
Jul 17th, 2016
1,363
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 77.67 KB | None | 0 0
  1. ##### hostapd configuration file ##############################################
  2. # Empty lines and lines starting with # are ignored
  3.  
  4. # AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
  5. # management frames with the Host AP driver); wlan0 with many nl80211 drivers
  6. interface=wlan0
  7.  
  8. # In case of atheros and nl80211 driver interfaces, an additional
  9. # configuration parameter, bridge, may be used to notify hostapd if the
  10. # interface is included in a bridge. This parameter is not used with Host AP
  11. # driver. If the bridge parameter is not set, the drivers will automatically
  12. # figure out the bridge interface (assuming sysfs is enabled and mounted to
  13. # /sys) and this parameter may not be needed.
  14. #
  15. # For nl80211, this parameter can be used to request the AP interface to be
  16. # added to the bridge automatically (brctl may refuse to do this before hostapd
  17. # has been started to change the interface mode). If needed, the bridge
  18. # interface is also created.
  19. #bridge=br0
  20.  
  21. # Driver interface type (hostap/wired/none/nl80211/bsd);
  22. # default: hostap). nl80211 is used with all Linux mac80211 drivers.
  23. # Use driver=none if building hostapd as a standalone RADIUS server that does
  24. # not control any wireless/wired driver.
  25. driver=rtl871xdrv
  26.  
  27. # Driver interface parameters (mainly for development testing use)
  28. # driver_params=<params>
  29.  
  30. # hostapd event logger configuration
  31. #
  32. # Two output method: syslog and stdout (only usable if not forking to
  33. # background).
  34. #
  35. # Module bitfield (ORed bitfield of modules that will be logged; -1 = all
  36. # modules):
  37. # bit 0 (1) = IEEE 802.11
  38. # bit 1 (2) = IEEE 802.1X
  39. # bit 2 (4) = RADIUS
  40. # bit 3 (8) = WPA
  41. # bit 4 (16) = driver interface
  42. # bit 5 (32) = IAPP
  43. # bit 6 (64) = MLME
  44. #
  45. # Levels (minimum value for logged events):
  46. # 0 = verbose debugging
  47. # 1 = debugging
  48. # 2 = informational messages
  49. # 3 = notification
  50. # 4 = warning
  51. #
  52. logger_syslog=-1
  53. logger_syslog_level=1
  54. logger_stdout=-1
  55. logger_stdout_level=2
  56.  
  57. # Interface for separate control program. If this is specified, hostapd
  58. # will create this directory and a UNIX domain socket for listening to requests
  59. # from external programs (CLI/GUI, etc.) for status information and
  60. # configuration. The socket file will be named based on the interface name, so
  61. # multiple hostapd processes/interfaces can be run at the same time if more
  62. # than one interface is used.
  63. # /var/run/hostapd is the recommended directory for sockets and by default,
  64. # hostapd_cli will use it when trying to connect with hostapd.
  65. ctrl_interface=/var/run/hostapd
  66.  
  67. # Access control for the control interface can be configured by setting the
  68. # directory to allow only members of a group to use sockets. This way, it is
  69. # possible to run hostapd as root (since it needs to change network
  70. # configuration and open raw sockets) and still allow GUI/CLI components to be
  71. # run as non-root users. However, since the control interface can be used to
  72. # change the network configuration, this access needs to be protected in many
  73. # cases. By default, hostapd is configured to use gid 0 (root). If you
  74. # want to allow non-root users to use the contron interface, add a new group
  75. # and change this value to match with that group. Add users that should have
  76. # control interface access to this group.
  77. #
  78. # This variable can be a group name or gid.
  79. #ctrl_interface_group=wheel
  80. ctrl_interface_group=0
  81.  
  82. ##### IEEE 802.11 related configuration #######################################
  83.  
  84. # SSID to be used in IEEE 802.11 management frames
  85. ssid=RADIONET-RPiNAS
  86. # Alternative formats for configuring SSID
  87. # (double quoted string, hexdump, printf-escaped string)
  88. #ssid2="test"
  89. #ssid2=74657374
  90. #ssid2=P"hello\nthere"
  91.  
  92. # UTF-8 SSID: Whether the SSID is to be interpreted using UTF-8 encoding
  93. #utf8_ssid=1
  94.  
  95. # Country code (ISO/IEC 3166-1). Used to set regulatory domain.
  96. # Set as needed to indicate country in which device is operating.
  97. # This can limit available channels and transmit power.
  98. country_code=BO
  99.  
  100. # Enable IEEE 802.11d. This advertises the country_code and the set of allowed
  101. # channels and transmit power levels based on the regulatory limits. The
  102. # country_code setting must be configured with the correct country for
  103. # IEEE 802.11d functions.
  104. # (default: 0 = disabled)
  105. ieee80211d=1
  106.  
  107. # Enable IEEE 802.11h. This enables radar detection and DFS support if
  108. # available. DFS support is required on outdoor 5 GHz channels in most countries
  109. # of the world. This can be used only with ieee80211d=1.
  110. # (default: 0 = disabled)
  111. #ieee80211h=1
  112.  
  113. # Add Power Constraint element to Beacon and Probe Response frames
  114. # This config option adds Power Constraint element when applicable and Country
  115. # element is added. Power Constraint element is required by Transmit Power
  116. # Control. This can be used only with ieee80211d=1.
  117. # Valid values are 0..255.
  118. #local_pwr_constraint=3
  119.  
  120. # Set Spectrum Management subfield in the Capability Information field.
  121. # This config option forces the Spectrum Management bit to be set. When this
  122. # option is not set, the value of the Spectrum Management bit depends on whether
  123. # DFS or TPC is required by regulatory authorities. This can be used only with
  124. # ieee80211d=1 and local_pwr_constraint configured.
  125. #spectrum_mgmt_required=1
  126.  
  127. # Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g,
  128. # ad = IEEE 802.11ad (60 GHz); a/g options are used with IEEE 802.11n, too, to
  129. # specify band). When using ACS (see channel parameter), a special value "any"
  130. # can be used to indicate that any support band can be used. This special case
  131. # is currently supported only with drivers with which offloaded ACS is used.
  132. # Default: IEEE 802.11b
  133. hw_mode=g
  134.  
  135. # Channel number (IEEE 802.11)
  136. # (default: 0, i.e., not set)
  137. # Please note that some drivers do not use this value from hostapd and the
  138. # channel will need to be configured separately with iwconfig.
  139. #
  140. # If CONFIG_ACS build option is enabled, the channel can be selected
  141. # automatically at run time by setting channel=acs_survey or channel=0, both of
  142. # which will enable the ACS survey based algorithm.
  143. #channel=6
  144. channel=5
  145.  
  146. # ACS tuning - Automatic Channel Selection
  147. # See: http://wireless.kernel.org/en/users/Documentation/acs
  148. #
  149. # You can customize the ACS survey algorithm with following variables:
  150. #
  151. # acs_num_scans requirement is 1..100 - number of scans to be performed that
  152. # are used to trigger survey data gathering of an underlying device driver.
  153. # Scans are passive and typically take a little over 100ms (depending on the
  154. # driver) on each available channel for given hw_mode. Increasing this value
  155. # means sacrificing startup time and gathering more data wrt channel
  156. # interference that may help choosing a better channel. This can also help fine
  157. # tune the ACS scan time in case a driver has different scan dwell times.
  158. #
  159. # acs_chan_bias is a space-separated list of <channel>:<bias> pairs. It can be
  160. # used to increase (or decrease) the likelihood of a specific channel to be
  161. # selected by the ACS algorithm. The total interference factor for each channel
  162. # gets multiplied by the specified bias value before finding the channel with
  163. # the lowest value. In other words, values between 0.0 and 1.0 can be used to
  164. # make a channel more likely to be picked while values larger than 1.0 make the
  165. # specified channel less likely to be picked. This can be used, e.g., to prefer
  166. # the commonly used 2.4 GHz band channels 1, 6, and 11 (which is the default
  167. # behavior on 2.4 GHz band if no acs_chan_bias parameter is specified).
  168. #
  169. # Defaults:
  170. #acs_num_scans=5
  171. #acs_chan_bias=1:0.8 6:0.8 11:0.8
  172.  
  173. # Channel list restriction. This option allows hostapd to select one of the
  174. # provided channels when a channel should be automatically selected.
  175. # Channel list can be provided as range using hyphen ('-') or individual
  176. # channels can be specified by space (' ') seperated values
  177. # Default: all channels allowed in selected hw_mode
  178. #chanlist=100 104 108 112 116
  179. #chanlist=1 6 11-13
  180.  
  181. # Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
  182. beacon_int=100
  183.  
  184. # DTIM (delivery traffic information message) period (range 1..255):
  185. # number of beacons between DTIMs (1 = every beacon includes DTIM element)
  186. # (default: 2)
  187. dtim_period=2
  188.  
  189. # Maximum number of stations allowed in station table. New stations will be
  190. # rejected after the station table is full. IEEE 802.11 has a limit of 2007
  191. # different association IDs, so this number should not be larger than that.
  192. # (default: 2007)
  193. max_num_sta=10
  194.  
  195. # RTS/CTS threshold; 2347 = disabled (default); range 0..2347
  196. # If this field is not included in hostapd.conf, hostapd will not control
  197. # RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it.
  198. rts_threshold=2347
  199.  
  200. # Fragmentation threshold; 2346 = disabled (default); range 256..2346
  201. # If this field is not included in hostapd.conf, hostapd will not control
  202. # fragmentation threshold and 'iwconfig wlan# frag <val>' can be used to set
  203. # it.
  204. fragm_threshold=2346
  205.  
  206. # Rate configuration
  207. # Default is to enable all rates supported by the hardware. This configuration
  208. # item allows this list be filtered so that only the listed rates will be left
  209. # in the list. If the list is empty, all rates are used. This list can have
  210. # entries that are not in the list of rates the hardware supports (such entries
  211. # are ignored). The entries in this list are in 100 kbps, i.e., 11 Mbps = 110.
  212. # If this item is present, at least one rate have to be matching with the rates
  213. # hardware supports.
  214. # default: use the most common supported rate setting for the selected
  215. # hw_mode (i.e., this line can be removed from configuration file in most
  216. # cases)
  217. #supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
  218.  
  219. # Basic rate set configuration
  220. # List of rates (in 100 kbps) that are included in the basic rate set.
  221. # If this item is not included, usually reasonable default set is used.
  222. #basic_rates=10 20
  223. #basic_rates=10 20 55 110
  224. #basic_rates=60 120 240
  225.  
  226. # Short Preamble
  227. # This parameter can be used to enable optional use of short preamble for
  228. # frames sent at 2 Mbps, 5.5 Mbps, and 11 Mbps to improve network performance.
  229. # This applies only to IEEE 802.11b-compatible networks and this should only be
  230. # enabled if the local hardware supports use of short preamble. If any of the
  231. # associated STAs do not support short preamble, use of short preamble will be
  232. # disabled (and enabled when such STAs disassociate) dynamically.
  233. # 0 = do not allow use of short preamble (default)
  234. # 1 = allow use of short preamble
  235. #preamble=1
  236.  
  237. # Station MAC address -based authentication
  238. # Please note that this kind of access control requires a driver that uses
  239. # hostapd to take care of management frame processing and as such, this can be
  240. # used with driver=hostap or driver=nl80211, but not with driver=atheros.
  241. # 0 = accept unless in deny list
  242. # 1 = deny unless in accept list
  243. # 2 = use external RADIUS server (accept/deny lists are searched first)
  244. macaddr_acl=3
  245.  
  246. # Accept/deny lists are read from separate files (containing list of
  247. # MAC addresses, one per line). Use absolute path name to make sure that the
  248. # files can be read on SIGHUP configuration reloads.
  249. accept_mac_file=/etc/hostapd.accept
  250. deny_mac_file=/etc/hostapd.deny
  251.  
  252. # IEEE 802.11 specifies two authentication algorithms. hostapd can be
  253. # configured to allow both of these or only one. Open system authentication
  254. # should be used with IEEE 802.1X.
  255. # Bit fields of allowed authentication algorithms:
  256. # bit 0 = Open System Authentication
  257. # bit 1 = Shared Key Authentication (requires WEP)
  258. auth_algs=3
  259. #auth_algs=1
  260.  
  261. # Send empty SSID in beacons and ignore probe request frames that do not
  262. # specify full SSID, i.e., require stations to know SSID.
  263. # default: disabled (0)
  264. # 1 = send empty (length=0) SSID in beacon and ignore probe request for
  265. # broadcast SSID
  266. # 2 = clear SSID (ASCII 0), but keep the original length (this may be required
  267. # with some clients that do not support empty SSID) and ignore probe
  268. # requests for broadcast SSID
  269. ignore_broadcast_ssid=0
  270.  
  271. # Additional vendor specfic elements for Beacon and Probe Response frames
  272. # This parameter can be used to add additional vendor specific element(s) into
  273. # the end of the Beacon and Probe Response frames. The format for these
  274. # element(s) is a hexdump of the raw information elements (id+len+payload for
  275. # one or more elements)
  276. #vendor_elements=dd0411223301
  277.  
  278. # TX queue parameters (EDCF / bursting)
  279. # tx_queue_<queue name>_<param>
  280. # queues: data0, data1, data2, data3, after_beacon, beacon
  281. # (data0 is the highest priority queue)
  282. # parameters:
  283. # aifs: AIFS (default 2)
  284. # cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191,
  285. # 16383, 32767)
  286. # cwmax: cwMax (same values as cwMin, cwMax >= cwMin)
  287. # burst: maximum length (in milliseconds with precision of up to 0.1 ms) for
  288. # bursting
  289. #
  290. # Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
  291. # These parameters are used by the access point when transmitting frames
  292. # to the clients.
  293. #
  294. # Low priority / AC_BK = background
  295. #tx_queue_data3_aifs=7
  296. #tx_queue_data3_cwmin=15
  297. #tx_queue_data3_cwmax=1023
  298. #tx_queue_data3_burst=0
  299. # Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
  300. #
  301. # Normal priority / AC_BE = best effort
  302. #tx_queue_data2_aifs=3
  303. #tx_queue_data2_cwmin=15
  304. #tx_queue_data2_cwmax=63
  305. #tx_queue_data2_burst=0
  306. # Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
  307. #
  308. # High priority / AC_VI = video
  309. #tx_queue_data1_aifs=1
  310. #tx_queue_data1_cwmin=7
  311. #tx_queue_data1_cwmax=15
  312. #tx_queue_data1_burst=3.0
  313. # Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
  314. #
  315. # Highest priority / AC_VO = voice
  316. #tx_queue_data0_aifs=1
  317. #tx_queue_data0_cwmin=3
  318. #tx_queue_data0_cwmax=7
  319. #tx_queue_data0_burst=1.5
  320. # Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3
  321.  
  322. # 802.1D Tag (= UP) to AC mappings
  323. # WMM specifies following mapping of data frames to different ACs. This mapping
  324. # can be configured using Linux QoS/tc and sch_pktpri.o module.
  325. # 802.1D Tag 802.1D Designation Access Category WMM Designation
  326. # 1 BK AC_BK Background
  327. # 2 - AC_BK Background
  328. # 0 BE AC_BE Best Effort
  329. # 3 EE AC_BE Best Effort
  330. # 4 CL AC_VI Video
  331. # 5 VI AC_VI Video
  332. # 6 VO AC_VO Voice
  333. # 7 NC AC_VO Voice
  334. # Data frames with no priority information: AC_BE
  335. # Management frames: AC_VO
  336. # PS-Poll frames: AC_BE
  337.  
  338. # Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
  339. # for 802.11a or 802.11g networks
  340. # These parameters are sent to WMM clients when they associate.
  341. # The parameters will be used by WMM clients for frames transmitted to the
  342. # access point.
  343. #
  344. # note - txop_limit is in units of 32microseconds
  345. # note - acm is admission control mandatory flag. 0 = admission control not
  346. # required, 1 = mandatory
  347. # note - Here cwMin and cmMax are in exponent form. The actual cw value used
  348. # will be (2^n)-1 where n is the value given here. The allowed range for these
  349. # wmm_ac_??_{cwmin,cwmax} is 0..15 with cwmax >= cwmin.
  350. #
  351. wmm_enabled=1
  352. #
  353. # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
  354. # Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
  355. #uapsd_advertisement_enabled=1
  356. #
  357. # Low priority / AC_BK = background
  358. wmm_ac_bk_cwmin=4
  359. wmm_ac_bk_cwmax=10
  360. wmm_ac_bk_aifs=7
  361. wmm_ac_bk_txop_limit=0
  362. wmm_ac_bk_acm=0
  363. # Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
  364. #
  365. # Normal priority / AC_BE = best effort
  366. wmm_ac_be_aifs=3
  367. wmm_ac_be_cwmin=4
  368. wmm_ac_be_cwmax=10
  369. wmm_ac_be_txop_limit=0
  370. wmm_ac_be_acm=0
  371. # Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
  372. #
  373. # High priority / AC_VI = video
  374. wmm_ac_vi_aifs=2
  375. wmm_ac_vi_cwmin=3
  376. wmm_ac_vi_cwmax=4
  377. wmm_ac_vi_txop_limit=94
  378. wmm_ac_vi_acm=0
  379. # Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
  380. #
  381. # Highest priority / AC_VO = voice
  382. wmm_ac_vo_aifs=2
  383. wmm_ac_vo_cwmin=2
  384. wmm_ac_vo_cwmax=3
  385. wmm_ac_vo_txop_limit=47
  386. wmm_ac_vo_acm=0
  387. # Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
  388.  
  389. # Static WEP key configuration
  390. #
  391. # The key number to use when transmitting.
  392. # It must be between 0 and 3, and the corresponding key must be set.
  393. # default: not set
  394. #wep_default_key=0
  395. # The WEP keys to use.
  396. # A key may be a quoted string or unquoted hexadecimal digits.
  397. # The key length should be 5, 13, or 16 characters, or 10, 26, or 32
  398. # digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
  399. # 128-bit (152-bit) WEP is used.
  400. # Only the default key must be supplied; the others are optional.
  401. # default: not set
  402. #wep_key0=123456789a
  403. #wep_key1="vwxyz"
  404. #wep_key2=0102030405060708090a0b0c0d
  405. #wep_key3=".2.4.6.8.0.23"
  406.  
  407. # Station inactivity limit
  408. #
  409. # If a station does not send anything in ap_max_inactivity seconds, an
  410. # empty data frame is sent to it in order to verify whether it is
  411. # still in range. If this frame is not ACKed, the station will be
  412. # disassociated and then deauthenticated. This feature is used to
  413. # clear station table of old entries when the STAs move out of the
  414. # range.
  415. #
  416. # The station can associate again with the AP if it is still in range;
  417. # this inactivity poll is just used as a nicer way of verifying
  418. # inactivity; i.e., client will not report broken connection because
  419. # disassociation frame is not sent immediately without first polling
  420. # the STA with a data frame.
  421. # default: 300 (i.e., 5 minutes)
  422. #ap_max_inactivity=300
  423. #
  424. # The inactivity polling can be disabled to disconnect stations based on
  425. # inactivity timeout so that idle stations are more likely to be disconnected
  426. # even if they are still in range of the AP. This can be done by setting
  427. # skip_inactivity_poll to 1 (default 0).
  428. #skip_inactivity_poll=0
  429.  
  430. # Disassociate stations based on excessive transmission failures or other
  431. # indications of connection loss. This depends on the driver capabilities and
  432. # may not be available with all drivers.
  433. #disassoc_low_ack=1
  434.  
  435. # Maximum allowed Listen Interval (how many Beacon periods STAs are allowed to
  436. # remain asleep). Default: 65535 (no limit apart from field size)
  437. #max_listen_interval=100
  438.  
  439. # WDS (4-address frame) mode with per-station virtual interfaces
  440. # (only supported with driver=nl80211)
  441. # This mode allows associated stations to use 4-address frames to allow layer 2
  442. # bridging to be used.
  443. #wds_sta=1
  444.  
  445. # If bridge parameter is set, the WDS STA interface will be added to the same
  446. # bridge by default. This can be overridden with the wds_bridge parameter to
  447. # use a separate bridge.
  448. #wds_bridge=wds-br0
  449.  
  450. # Start the AP with beaconing disabled by default.
  451. #start_disabled=0
  452.  
  453. # Client isolation can be used to prevent low-level bridging of frames between
  454. # associated stations in the BSS. By default, this bridging is allowed.
  455. #ap_isolate=1
  456.  
  457. # BSS Load update period (in BUs)
  458. # This field is used to enable and configure adding a BSS Load element into
  459. # Beacon and Probe Response frames.
  460. #bss_load_update_period=50
  461.  
  462. # Fixed BSS Load value for testing purposes
  463. # This field can be used to configure hostapd to add a fixed BSS Load element
  464. # into Beacon and Probe Response frames for testing purposes. The format is
  465. # <station count>:<channel utilization>:<available admission capacity>
  466. #bss_load_test=12:80:20000
  467.  
  468. ##### IEEE 802.11n related configuration ######################################
  469.  
  470. # ieee80211n: Whether IEEE 802.11n (HT) is enabled
  471. # 0 = disabled (default)
  472. # 1 = enabled
  473. # Note: You will also need to enable WMM for full HT functionality.
  474. ieee80211n=1
  475.  
  476. # ht_capab: HT capabilities (list of flags)
  477. # LDPC coding capability: [LDPC] = supported
  478. # Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
  479. # channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
  480. # with secondary channel above the primary channel
  481. # (20 MHz only if neither is set)
  482. # Note: There are limits on which channels can be used with HT40- and
  483. # HT40+. Following table shows the channels that may be available for
  484. # HT40- and HT40+ use per IEEE 802.11n Annex J:
  485. # freq HT40- HT40+
  486. # 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan)
  487. # 5 GHz 40,48,56,64 36,44,52,60
  488. # (depending on the location, not all of these channels may be available
  489. # for use)
  490. # Please note that 40 MHz channels may switch their primary and secondary
  491. # channels if needed or creation of 40 MHz channel maybe rejected based
  492. # on overlapping BSSes. These changes are done automatically when hostapd
  493. # is setting up the 40 MHz channel.
  494. # Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC]
  495. # (SMPS disabled if neither is set)
  496. # HT-greenfield: [GF] (disabled if not set)
  497. # Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
  498. # Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
  499. # Tx STBC: [TX-STBC] (disabled if not set)
  500. # Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
  501. # streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
  502. # disabled if none of these set
  503. # HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
  504. # Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
  505. # set)
  506. # DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
  507. # 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
  508. # L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
  509. #ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]
  510.  
  511. #ht_capab=[SHORT-GI-20][SHORT-GI-40][HT40]
  512. ##ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
  513. #ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40]
  514.  
  515. #ht_capab=[HT40-][SHORT-GI-40][DSSS_CCK-40]
  516. ht_capab=[HT40+][SHORT-GI-40][DSSS_CCK-40]
  517. #ht_capab=[SHORT-GI-20][SHORT-GI-40][HT40+]
  518. #ht_capab=[HT40-][HT40+][SHORT-GI-40][DSSS_CCK-40]
  519.  
  520.  
  521. # Require stations to support HT PHY (reject association if they do not)
  522. require_ht=0
  523.  
  524. # If set non-zero, require stations to perform scans of overlapping
  525. # channels to test for stations which would be affected by 40 MHz traffic.
  526. # This parameter sets the interval in seconds between these scans. Setting this
  527. # to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz channel if
  528. # no co-existence issues with neighboring devices are found.
  529. #obss_interval=0
  530.  
  531. ##### IEEE 802.11ac related configuration #####################################
  532.  
  533. # ieee80211ac: Whether IEEE 802.11ac (VHT) is enabled
  534. # 0 = disabled (default)
  535. # 1 = enabled
  536. # Note: You will also need to enable WMM for full VHT functionality.
  537. #ieee80211ac=1
  538.  
  539. # vht_capab: VHT capabilities (list of flags)
  540. #
  541. # vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
  542. # Indicates maximum MPDU length
  543. # 0 = 3895 octets (default)
  544. # 1 = 7991 octets
  545. # 2 = 11454 octets
  546. # 3 = reserved
  547. #
  548. # supported_chan_width: [VHT160] [VHT160-80PLUS80]
  549. # Indicates supported Channel widths
  550. # 0 = 160 MHz & 80+80 channel widths are not supported (default)
  551. # 1 = 160 MHz channel width is supported
  552. # 2 = 160 MHz & 80+80 channel widths are supported
  553. # 3 = reserved
  554. #
  555. # Rx LDPC coding capability: [RXLDPC]
  556. # Indicates support for receiving LDPC coded pkts
  557. # 0 = Not supported (default)
  558. # 1 = Supported
  559. #
  560. # Short GI for 80 MHz: [SHORT-GI-80]
  561. # Indicates short GI support for reception of packets transmitted with TXVECTOR
  562. # params format equal to VHT and CBW = 80Mhz
  563. # 0 = Not supported (default)
  564. # 1 = Supported
  565. #
  566. # Short GI for 160 MHz: [SHORT-GI-160]
  567. # Indicates short GI support for reception of packets transmitted with TXVECTOR
  568. # params format equal to VHT and CBW = 160Mhz
  569. # 0 = Not supported (default)
  570. # 1 = Supported
  571. #
  572. # Tx STBC: [TX-STBC-2BY1]
  573. # Indicates support for the transmission of at least 2x1 STBC
  574. # 0 = Not supported (default)
  575. # 1 = Supported
  576. #
  577. # Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234]
  578. # Indicates support for the reception of PPDUs using STBC
  579. # 0 = Not supported (default)
  580. # 1 = support of one spatial stream
  581. # 2 = support of one and two spatial streams
  582. # 3 = support of one, two and three spatial streams
  583. # 4 = support of one, two, three and four spatial streams
  584. # 5,6,7 = reserved
  585. #
  586. # SU Beamformer Capable: [SU-BEAMFORMER]
  587. # Indicates support for operation as a single user beamformer
  588. # 0 = Not supported (default)
  589. # 1 = Supported
  590. #
  591. # SU Beamformee Capable: [SU-BEAMFORMEE]
  592. # Indicates support for operation as a single user beamformee
  593. # 0 = Not supported (default)
  594. # 1 = Supported
  595. #
  596. # Compressed Steering Number of Beamformer Antennas Supported:
  597. # [BF-ANTENNA-2] [BF-ANTENNA-3] [BF-ANTENNA-4]
  598. # Beamformee's capability indicating the maximum number of beamformer
  599. # antennas the beamformee can support when sending compressed beamforming
  600. # feedback
  601. # If SU beamformer capable, set to maximum value minus 1
  602. # else reserved (default)
  603. #
  604. # Number of Sounding Dimensions:
  605. # [SOUNDING-DIMENSION-2] [SOUNDING-DIMENSION-3] [SOUNDING-DIMENSION-4]
  606. # Beamformer's capability indicating the maximum value of the NUM_STS parameter
  607. # in the TXVECTOR of a VHT NDP
  608. # If SU beamformer capable, set to maximum value minus 1
  609. # else reserved (default)
  610. #
  611. # MU Beamformer Capable: [MU-BEAMFORMER]
  612. # Indicates support for operation as an MU beamformer
  613. # 0 = Not supported or sent by Non-AP STA (default)
  614. # 1 = Supported
  615. #
  616. # VHT TXOP PS: [VHT-TXOP-PS]
  617. # Indicates whether or not the AP supports VHT TXOP Power Save Mode
  618. # or whether or not the STA is in VHT TXOP Power Save mode
  619. # 0 = VHT AP doesnt support VHT TXOP PS mode (OR) VHT Sta not in VHT TXOP PS
  620. # mode
  621. # 1 = VHT AP supports VHT TXOP PS mode (OR) VHT Sta is in VHT TXOP power save
  622. # mode
  623. #
  624. # +HTC-VHT Capable: [HTC-VHT]
  625. # Indicates whether or not the STA supports receiving a VHT variant HT Control
  626. # field.
  627. # 0 = Not supported (default)
  628. # 1 = supported
  629. #
  630. # Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7]
  631. # Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv
  632. # This field is an integer in the range of 0 to 7.
  633. # The length defined by this field is equal to
  634. # 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
  635. #
  636. # VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3]
  637. # Indicates whether or not the STA supports link adaptation using VHT variant
  638. # HT Control field
  639. # If +HTC-VHTcapable is 1
  640. # 0 = (no feedback) if the STA does not provide VHT MFB (default)
  641. # 1 = reserved
  642. # 2 = (Unsolicited) if the STA provides only unsolicited VHT MFB
  643. # 3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the
  644. # STA provides unsolicited VHT MFB
  645. # Reserved if +HTC-VHTcapable is 0
  646. #
  647. # Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN]
  648. # Indicates the possibility of Rx antenna pattern change
  649. # 0 = Rx antenna pattern might change during the lifetime of an association
  650. # 1 = Rx antenna pattern does not change during the lifetime of an association
  651. #
  652. # Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
  653. # Indicates the possibility of Tx antenna pattern change
  654. # 0 = Tx antenna pattern might change during the lifetime of an association
  655. # 1 = Tx antenna pattern does not change during the lifetime of an association
  656. #vht_capab=[SHORT-GI-80][HTC-VHT]
  657. #
  658. # Require stations to support VHT PHY (reject association if they do not)
  659. #require_vht=1
  660.  
  661. # 0 = 20 or 40 MHz operating Channel width
  662. # 1 = 80 MHz channel width
  663. # 2 = 160 MHz channel width
  664. # 3 = 80+80 MHz channel width
  665. #vht_oper_chwidth=1
  666. #
  667. # center freq = 5 GHz + (5 * index)
  668. # So index 42 gives center freq 5.210 GHz
  669. # which is channel 42 in 5G band
  670. #
  671. #vht_oper_centr_freq_seg0_idx=42
  672. #
  673. # center freq = 5 GHz + (5 * index)
  674. # So index 159 gives center freq 5.795 GHz
  675. # which is channel 159 in 5G band
  676. #
  677. #vht_oper_centr_freq_seg1_idx=159
  678.  
  679. ##### IEEE 802.1X-2004 related configuration ##################################
  680.  
  681. # Require IEEE 802.1X authorization
  682. #ieee8021x=1
  683.  
  684. # IEEE 802.1X/EAPOL version
  685. # hostapd is implemented based on IEEE Std 802.1X-2004 which defines EAPOL
  686. # version 2. However, there are many client implementations that do not handle
  687. # the new version number correctly (they seem to drop the frames completely).
  688. # In order to make hostapd interoperate with these clients, the version number
  689. # can be set to the older version (1) with this configuration value.
  690. #eapol_version=2
  691.  
  692. # Optional displayable message sent with EAP Request-Identity. The first \0
  693. # in this string will be converted to ASCII-0 (nul). This can be used to
  694. # separate network info (comma separated list of attribute=value pairs); see,
  695. # e.g., RFC 4284.
  696. #eap_message=hello
  697. #eap_message=hello\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com
  698.  
  699. # WEP rekeying (disabled if key lengths are not set or are set to 0)
  700. # Key lengths for default/broadcast and individual/unicast keys:
  701. # 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits)
  702. # 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits)
  703. #wep_key_len_broadcast=5
  704. #wep_key_len_unicast=5
  705. # Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once)
  706. #wep_rekey_period=300
  707.  
  708. # EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if
  709. # only broadcast keys are used)
  710. eapol_key_index_workaround=0
  711.  
  712. # EAP reauthentication period in seconds (default: 3600 seconds; 0 = disable
  713. # reauthentication).
  714. #eap_reauth_period=3600
  715.  
  716. # Use PAE group address (01:80:c2:00:00:03) instead of individual target
  717. # address when sending EAPOL frames with driver=wired. This is the most common
  718. # mechanism used in wired authentication, but it also requires that the port
  719. # is only used by one station.
  720. #use_pae_group_addr=1
  721.  
  722. # EAP Re-authentication Protocol (ERP) authenticator (RFC 6696)
  723. #
  724. # Whether to initiate EAP authentication with EAP-Initiate/Re-auth-Start before
  725. # EAP-Identity/Request
  726. #erp_send_reauth_start=1
  727. #
  728. # Domain name for EAP-Initiate/Re-auth-Start. Omitted from the message if not
  729. # set (no local ER server). This is also used by the integrated EAP server if
  730. # ERP is enabled (eap_server_erp=1).
  731. #erp_domain=example.com
  732.  
  733. ##### Integrated EAP server ###################################################
  734.  
  735. # Optionally, hostapd can be configured to use an integrated EAP server
  736. # to process EAP authentication locally without need for an external RADIUS
  737. # server. This functionality can be used both as a local authentication server
  738. # for IEEE 802.1X/EAPOL and as a RADIUS server for other devices.
  739.  
  740. # Use integrated EAP server instead of external RADIUS authentication
  741. # server. This is also needed if hostapd is configured to act as a RADIUS
  742. # authentication server.
  743. #eap_server=0
  744.  
  745. # Path for EAP server user database
  746. # If SQLite support is included, this can be set to "sqlite:/path/to/sqlite.db"
  747. # to use SQLite database instead of a text file.
  748. #eap_user_file=/etc/hostapd.eap_user
  749.  
  750. # CA certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS
  751. #ca_cert=/etc/hostapd.ca.pem
  752.  
  753. # Server certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS
  754. #server_cert=/etc/hostapd.server.pem
  755.  
  756. # Private key matching with the server certificate for EAP-TLS/PEAP/TTLS
  757. # This may point to the same file as server_cert if both certificate and key
  758. # are included in a single file. PKCS#12 (PFX) file (.p12/.pfx) can also be
  759. # used by commenting out server_cert and specifying the PFX file as the
  760. # private_key.
  761. #private_key=/etc/hostapd.server.prv
  762.  
  763. # Passphrase for private key
  764. #private_key_passwd=secret passphrase
  765.  
  766. # Server identity
  767. # EAP methods that provide mechanism for authenticated server identity delivery
  768. # use this value. If not set, "hostapd" is used as a default.
  769. #server_id=server.example.com
  770.  
  771. # Enable CRL verification.
  772. # Note: hostapd does not yet support CRL downloading based on CDP. Thus, a
  773. # valid CRL signed by the CA is required to be included in the ca_cert file.
  774. # This can be done by using PEM format for CA certificate and CRL and
  775. # concatenating these into one file. Whenever CRL changes, hostapd needs to be
  776. # restarted to take the new CRL into use.
  777. # 0 = do not verify CRLs (default)
  778. # 1 = check the CRL of the user certificate
  779. # 2 = check all CRLs in the certificate path
  780. #check_crl=1
  781.  
  782. # TLS Session Lifetime in seconds
  783. # This can be used to allow TLS sessions to be cached and resumed with an
  784. # abbreviated handshake when using EAP-TLS/TTLS/PEAP.
  785. # (default: 0 = session caching and resumption disabled)
  786. #tls_session_lifetime=3600
  787.  
  788. # Cached OCSP stapling response (DER encoded)
  789. # If set, this file is sent as a certificate status response by the EAP server
  790. # if the EAP peer requests certificate status in the ClientHello message.
  791. # This cache file can be updated, e.g., by running following command
  792. # periodically to get an update from the OCSP responder:
  793. # openssl ocsp \
  794. # -no_nonce \
  795. # -CAfile /etc/hostapd.ca.pem \
  796. # -issuer /etc/hostapd.ca.pem \
  797. # -cert /etc/hostapd.server.pem \
  798. # -url http://ocsp.example.com:8888/ \
  799. # -respout /tmp/ocsp-cache.der
  800. #ocsp_stapling_response=/tmp/ocsp-cache.der
  801.  
  802. # dh_file: File path to DH/DSA parameters file (in PEM format)
  803. # This is an optional configuration file for setting parameters for an
  804. # ephemeral DH key exchange. In most cases, the default RSA authentication does
  805. # not use this configuration. However, it is possible setup RSA to use
  806. # ephemeral DH key exchange. In addition, ciphers with DSA keys always use
  807. # ephemeral DH keys. This can be used to achieve forward secrecy. If the file
  808. # is in DSA parameters format, it will be automatically converted into DH
  809. # params. This parameter is required if anonymous EAP-FAST is used.
  810. # You can generate DH parameters file with OpenSSL, e.g.,
  811. # "openssl dhparam -out /etc/hostapd.dh.pem 2048"
  812. #dh_file=/etc/hostapd.dh.pem
  813.  
  814. # OpenSSL cipher string
  815. #
  816. # This is an OpenSSL specific configuration option for configuring the default
  817. # ciphers. If not set, "DEFAULT:!EXP:!LOW" is used as the default.
  818. # See https://www.openssl.org/docs/apps/ciphers.html for OpenSSL documentation
  819. # on cipher suite configuration. This is applicable only if hostapd is built to
  820. # use OpenSSL.
  821. #openssl_ciphers=DEFAULT:!EXP:!LOW
  822.  
  823. # Fragment size for EAP methods
  824. #fragment_size=1400
  825.  
  826. # Finite cyclic group for EAP-pwd. Number maps to group of domain parameters
  827. # using the IANA repository for IKE (RFC 2409).
  828. #pwd_group=19
  829.  
  830. # Configuration data for EAP-SIM database/authentication gateway interface.
  831. # This is a text string in implementation specific format. The example
  832. # implementation in eap_sim_db.c uses this as the UNIX domain socket name for
  833. # the HLR/AuC gateway (e.g., hlr_auc_gw). In this case, the path uses "unix:"
  834. # prefix. If hostapd is built with SQLite support (CONFIG_SQLITE=y in .config),
  835. # database file can be described with an optional db=<path> parameter.
  836. #eap_sim_db=unix:/tmp/hlr_auc_gw.sock
  837. #eap_sim_db=unix:/tmp/hlr_auc_gw.sock db=/tmp/hostapd.db
  838.  
  839. # Encryption key for EAP-FAST PAC-Opaque values. This key must be a secret,
  840. # random value. It is configured as a 16-octet value in hex format. It can be
  841. # generated, e.g., with the following command:
  842. # od -tx1 -v -N16 /dev/random | colrm 1 8 | tr -d ' '
  843. #pac_opaque_encr_key=000102030405060708090a0b0c0d0e0f
  844.  
  845. # EAP-FAST authority identity (A-ID)
  846. # A-ID indicates the identity of the authority that issues PACs. The A-ID
  847. # should be unique across all issuing servers. In theory, this is a variable
  848. # length field, but due to some existing implementations requiring A-ID to be
  849. # 16 octets in length, it is strongly recommended to use that length for the
  850. # field to provid interoperability with deployed peer implementations. This
  851. # field is configured in hex format.
  852. #eap_fast_a_id=101112131415161718191a1b1c1d1e1f
  853.  
  854. # EAP-FAST authority identifier information (A-ID-Info)
  855. # This is a user-friendly name for the A-ID. For example, the enterprise name
  856. # and server name in a human-readable format. This field is encoded as UTF-8.
  857. #eap_fast_a_id_info=test server
  858.  
  859. # Enable/disable different EAP-FAST provisioning modes:
  860. #0 = provisioning disabled
  861. #1 = only anonymous provisioning allowed
  862. #2 = only authenticated provisioning allowed
  863. #3 = both provisioning modes allowed (default)
  864. #eap_fast_prov=3
  865.  
  866. # EAP-FAST PAC-Key lifetime in seconds (hard limit)
  867. #pac_key_lifetime=604800
  868.  
  869. # EAP-FAST PAC-Key refresh time in seconds (soft limit on remaining hard
  870. # limit). The server will generate a new PAC-Key when this number of seconds
  871. # (or fewer) of the lifetime remains.
  872. #pac_key_refresh_time=86400
  873.  
  874. # EAP-SIM and EAP-AKA protected success/failure indication using AT_RESULT_IND
  875. # (default: 0 = disabled).
  876. #eap_sim_aka_result_ind=1
  877.  
  878. # Trusted Network Connect (TNC)
  879. # If enabled, TNC validation will be required before the peer is allowed to
  880. # connect. Note: This is only used with EAP-TTLS and EAP-FAST. If any other
  881. # EAP method is enabled, the peer will be allowed to connect without TNC.
  882. #tnc=1
  883.  
  884. # EAP Re-authentication Protocol (ERP) - RFC 6696
  885. #
  886. # Whether to enable ERP on the EAP server.
  887. #eap_server_erp=1
  888.  
  889. ##### IEEE 802.11f - Inter-Access Point Protocol (IAPP) #######################
  890.  
  891. # Interface to be used for IAPP broadcast packets
  892. #iapp_interface=eth0
  893.  
  894.  
  895. ##### RADIUS client configuration #############################################
  896. # for IEEE 802.1X with external Authentication Server, IEEE 802.11
  897. # authentication with external ACL for MAC addresses, and accounting
  898.  
  899. # The own IP address of the access point (used as NAS-IP-Address)
  900. own_ip_addr=127.0.0.1
  901.  
  902. # Optional NAS-Identifier string for RADIUS messages. When used, this should be
  903. # a unique to the NAS within the scope of the RADIUS server. For example, a
  904. # fully qualified domain name can be used here.
  905. # When using IEEE 802.11r, nas_identifier must be set and must be between 1 and
  906. # 48 octets long.
  907. #nas_identifier=ap.example.com
  908.  
  909. # RADIUS client forced local IP address for the access point
  910. # Normally the local IP address is determined automatically based on configured
  911. # IP addresses, but this field can be used to force a specific address to be
  912. # used, e.g., when the device has multiple IP addresses.
  913. #radius_client_addr=127.0.0.1
  914.  
  915. # RADIUS authentication server
  916. #auth_server_addr=127.0.0.1
  917. #auth_server_port=1812
  918. #auth_server_shared_secret=secret
  919.  
  920. # RADIUS accounting server
  921. #acct_server_addr=127.0.0.1
  922. #acct_server_port=1813
  923. #acct_server_shared_secret=secret
  924.  
  925. # Secondary RADIUS servers; to be used if primary one does not reply to
  926. # RADIUS packets. These are optional and there can be more than one secondary
  927. # server listed.
  928. #auth_server_addr=127.0.0.2
  929. #auth_server_port=1812
  930. #auth_server_shared_secret=secret2
  931. #
  932. #acct_server_addr=127.0.0.2
  933. #acct_server_port=1813
  934. #acct_server_shared_secret=secret2
  935.  
  936. # Retry interval for trying to return to the primary RADIUS server (in
  937. # seconds). RADIUS client code will automatically try to use the next server
  938. # when the current server is not replying to requests. If this interval is set,
  939. # primary server will be retried after configured amount of time even if the
  940. # currently used secondary server is still working.
  941. #radius_retry_primary_interval=600
  942.  
  943.  
  944. # Interim accounting update interval
  945. # If this is set (larger than 0) and acct_server is configured, hostapd will
  946. # send interim accounting updates every N seconds. Note: if set, this overrides
  947. # possible Acct-Interim-Interval attribute in Access-Accept message. Thus, this
  948. # value should not be configured in hostapd.conf, if RADIUS server is used to
  949. # control the interim interval.
  950. # This value should not be less 600 (10 minutes) and must not be less than
  951. # 60 (1 minute).
  952. #radius_acct_interim_interval=600
  953.  
  954. # Request Chargeable-User-Identity (RFC 4372)
  955. # This parameter can be used to configure hostapd to request CUI from the
  956. # RADIUS server by including Chargeable-User-Identity attribute into
  957. # Access-Request packets.
  958. #radius_request_cui=1
  959.  
  960. # Dynamic VLAN mode; allow RADIUS authentication server to decide which VLAN
  961. # is used for the stations. This information is parsed from following RADIUS
  962. # attributes based on RFC 3580 and RFC 2868: Tunnel-Type (value 13 = VLAN),
  963. # Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value
  964. # VLANID as a string). Optionally, the local MAC ACL list (accept_mac_file) can
  965. # be used to set static client MAC address to VLAN ID mapping.
  966. # 0 = disabled (default)
  967. # 1 = option; use default interface if RADIUS server does not include VLAN ID
  968. # 2 = required; reject authentication if RADIUS server does not include VLAN ID
  969. #dynamic_vlan=0
  970.  
  971. # VLAN interface list for dynamic VLAN mode is read from a separate text file.
  972. # This list is used to map VLAN ID from the RADIUS server to a network
  973. # interface. Each station is bound to one interface in the same way as with
  974. # multiple BSSIDs or SSIDs. Each line in this text file is defining a new
  975. # interface and the line must include VLAN ID and interface name separated by
  976. # white space (space or tab).
  977. # If no entries are provided by this file, the station is statically mapped
  978. # to <bss-iface>.<vlan-id> interfaces.
  979. #vlan_file=/etc/hostapd.vlan
  980.  
  981. # Interface where 802.1q tagged packets should appear when a RADIUS server is
  982. # used to determine which VLAN a station is on. hostapd creates a bridge for
  983. # each VLAN. Then hostapd adds a VLAN interface (associated with the interface
  984. # indicated by 'vlan_tagged_interface') and the appropriate wireless interface
  985. # to the bridge.
  986. #vlan_tagged_interface=eth0
  987.  
  988. # Bridge (prefix) to add the wifi and the tagged interface to. This gets the
  989. # VLAN ID appended. It defaults to brvlan%d if no tagged interface is given
  990. # and br%s.%d if a tagged interface is given, provided %s = tagged interface
  991. # and %d = VLAN ID.
  992. #vlan_bridge=brvlan
  993.  
  994. # When hostapd creates a VLAN interface on vlan_tagged_interfaces, it needs
  995. # to know how to name it.
  996. # 0 = vlan<XXX>, e.g., vlan1
  997. # 1 = <vlan_tagged_interface>.<XXX>, e.g. eth0.1
  998. #vlan_naming=0
  999.  
  1000. # Arbitrary RADIUS attributes can be added into Access-Request and
  1001. # Accounting-Request packets by specifying the contents of the attributes with
  1002. # the following configuration parameters. There can be multiple of these to
  1003. # add multiple attributes. These parameters can also be used to override some
  1004. # of the attributes added automatically by hostapd.
  1005. # Format: <attr_id>[:<syntax:value>]
  1006. # attr_id: RADIUS attribute type (e.g., 26 = Vendor-Specific)
  1007. # syntax: s = string (UTF-8), d = integer, x = octet string
  1008. # value: attribute value in format indicated by the syntax
  1009. # If syntax and value parts are omitted, a null value (single 0x00 octet) is
  1010. # used.
  1011. #
  1012. # Additional Access-Request attributes
  1013. # radius_auth_req_attr=<attr_id>[:<syntax:value>]
  1014. # Examples:
  1015. # Operator-Name = "Operator"
  1016. #radius_auth_req_attr=126:s:Operator
  1017. # Service-Type = Framed (2)
  1018. #radius_auth_req_attr=6:d:2
  1019. # Connect-Info = "testing" (this overrides the automatically generated value)
  1020. #radius_auth_req_attr=77:s:testing
  1021. # Same Connect-Info value set as a hexdump
  1022. #radius_auth_req_attr=77:x:74657374696e67
  1023.  
  1024. #
  1025. # Additional Accounting-Request attributes
  1026. # radius_acct_req_attr=<attr_id>[:<syntax:value>]
  1027. # Examples:
  1028. # Operator-Name = "Operator"
  1029. #radius_acct_req_attr=126:s:Operator
  1030.  
  1031. # Dynamic Authorization Extensions (RFC 5176)
  1032. # This mechanism can be used to allow dynamic changes to user session based on
  1033. # commands from a RADIUS server (or some other disconnect client that has the
  1034. # needed session information). For example, Disconnect message can be used to
  1035. # request an associated station to be disconnected.
  1036. #
  1037. # This is disabled by default. Set radius_das_port to non-zero UDP port
  1038. # number to enable.
  1039. #radius_das_port=3799
  1040. #
  1041. # DAS client (the host that can send Disconnect/CoA requests) and shared secret
  1042. #radius_das_client=192.168.1.123 shared secret here
  1043. #
  1044. # DAS Event-Timestamp time window in seconds
  1045. #radius_das_time_window=300
  1046. #
  1047. # DAS require Event-Timestamp
  1048. #radius_das_require_event_timestamp=1
  1049.  
  1050. ##### RADIUS authentication server configuration ##############################
  1051.  
  1052. # hostapd can be used as a RADIUS authentication server for other hosts. This
  1053. # requires that the integrated EAP server is also enabled and both
  1054. # authentication services are sharing the same configuration.
  1055.  
  1056. # File name of the RADIUS clients configuration for the RADIUS server. If this
  1057. # commented out, RADIUS server is disabled.
  1058. #radius_server_clients=/etc/hostapd.radius_clients
  1059.  
  1060. # The UDP port number for the RADIUS authentication server
  1061. #radius_server_auth_port=1812
  1062.  
  1063. # The UDP port number for the RADIUS accounting server
  1064. # Commenting this out or setting this to 0 can be used to disable RADIUS
  1065. # accounting while still enabling RADIUS authentication.
  1066. #radius_server_acct_port=1813
  1067.  
  1068. # Use IPv6 with RADIUS server (IPv4 will also be supported using IPv6 API)
  1069. #radius_server_ipv6=1
  1070.  
  1071.  
  1072. ##### WPA/IEEE 802.11i configuration ##########################################
  1073.  
  1074. # Enable WPA. Setting this variable configures the AP to require WPA (either
  1075. # WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
  1076. # wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
  1077. # Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice.
  1078. # For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
  1079. # RADIUS authentication server must be configured, and WPA-EAP must be included
  1080. # in wpa_key_mgmt.
  1081. # This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
  1082. # and/or WPA2 (full IEEE 802.11i/RSN):
  1083. # bit0 = WPA
  1084. # bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
  1085. #wpa=1
  1086.  
  1087. # WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
  1088. # secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
  1089. # (8..63 characters) that will be converted to PSK. This conversion uses SSID
  1090. # so the PSK changes when ASCII passphrase is used and the SSID is changed.
  1091. # wpa_psk (dot11RSNAConfigPSKValue)
  1092. # wpa_passphrase (dot11RSNAConfigPSKPassPhrase)
  1093. #wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
  1094. #wpa_passphrase=secret passphrase
  1095.  
  1096. # Optionally, WPA PSKs can be read from a separate text file (containing list
  1097. # of (PSK,MAC address) pairs. This allows more than one PSK to be configured.
  1098. # Use absolute path name to make sure that the files can be read on SIGHUP
  1099. # configuration reloads.
  1100. #wpa_psk_file=/etc/hostapd.wpa_psk
  1101.  
  1102. # Optionally, WPA passphrase can be received from RADIUS authentication server
  1103. # This requires macaddr_acl to be set to 2 (RADIUS)
  1104. # 0 = disabled (default)
  1105. # 1 = optional; use default passphrase/psk if RADIUS server does not include
  1106. # Tunnel-Password
  1107. # 2 = required; reject authentication if RADIUS server does not include
  1108. # Tunnel-Password
  1109. #wpa_psk_radius=0
  1110.  
  1111. # Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
  1112. # entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
  1113. # added to enable SHA256-based stronger algorithms.
  1114. # (dot11RSNAConfigAuthenticationSuitesTable)
  1115. #wpa_key_mgmt=WPA-PSK WPA-EAP
  1116.  
  1117. # Set of accepted cipher suites (encryption algorithms) for pairwise keys
  1118. # (unicast packets). This is a space separated list of algorithms:
  1119. # CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
  1120. # TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
  1121. # Group cipher suite (encryption algorithm for broadcast and multicast frames)
  1122. # is automatically selected based on this configuration. If only CCMP is
  1123. # allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
  1124. # TKIP will be used as the group cipher.
  1125. # (dot11RSNAConfigPairwiseCiphersTable)
  1126. # Pairwise cipher for WPA (v1) (default: TKIP)
  1127. #wpa_pairwise=TKIP CCMP
  1128. # Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
  1129. #rsn_pairwise=CCMP
  1130.  
  1131. # Time interval for rekeying GTK (broadcast/multicast encryption keys) in
  1132. # seconds. (dot11RSNAConfigGroupRekeyTime)
  1133. #wpa_group_rekey=600
  1134.  
  1135. # Rekey GTK when any STA that possesses the current GTK is leaving the BSS.
  1136. # (dot11RSNAConfigGroupRekeyStrict)
  1137. #wpa_strict_rekey=1
  1138.  
  1139. # Time interval for rekeying GMK (master key used internally to generate GTKs
  1140. # (in seconds).
  1141. #wpa_gmk_rekey=86400
  1142.  
  1143. # Maximum lifetime for PTK in seconds. This can be used to enforce rekeying of
  1144. # PTK to mitigate some attacks against TKIP deficiencies.
  1145. #wpa_ptk_rekey=600
  1146.  
  1147. # Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up
  1148. # roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN
  1149. # authentication and key handshake before actually associating with a new AP.
  1150. # (dot11RSNAPreauthenticationEnabled)
  1151. #rsn_preauth=1
  1152. #
  1153. # Space separated list of interfaces from which pre-authentication frames are
  1154. # accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all
  1155. # interface that are used for connections to other APs. This could include
  1156. # wired interfaces and WDS links. The normal wireless data interface towards
  1157. # associated stations (e.g., wlan0) should not be added, since
  1158. # pre-authentication is only used with APs other than the currently associated
  1159. # one.
  1160. #rsn_preauth_interfaces=eth0
  1161.  
  1162. # peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e) is
  1163. # allowed. This is only used with RSN/WPA2.
  1164. # 0 = disabled (default)
  1165. # 1 = enabled
  1166. #peerkey=1
  1167.  
  1168. # ieee80211w: Whether management frame protection (MFP) is enabled
  1169. # 0 = disabled (default)
  1170. # 1 = optional
  1171. # 2 = required
  1172. #ieee80211w=0
  1173.  
  1174. # Group management cipher suite
  1175. # Default: AES-128-CMAC (BIP)
  1176. # Other options (depending on driver support):
  1177. # BIP-GMAC-128
  1178. # BIP-GMAC-256
  1179. # BIP-CMAC-256
  1180. # Note: All the stations connecting to the BSS will also need to support the
  1181. # selected cipher. The default AES-128-CMAC is the only option that is commonly
  1182. # available in deployed devices.
  1183. #group_mgmt_cipher=AES-128-CMAC
  1184.  
  1185. # Association SA Query maximum timeout (in TU = 1.024 ms; for MFP)
  1186. # (maximum time to wait for a SA Query response)
  1187. # dot11AssociationSAQueryMaximumTimeout, 1...4294967295
  1188. #assoc_sa_query_max_timeout=1000
  1189.  
  1190. # Association SA Query retry timeout (in TU = 1.024 ms; for MFP)
  1191. # (time between two subsequent SA Query requests)
  1192. # dot11AssociationSAQueryRetryTimeout, 1...4294967295
  1193. #assoc_sa_query_retry_timeout=201
  1194.  
  1195. # disable_pmksa_caching: Disable PMKSA caching
  1196. # This parameter can be used to disable caching of PMKSA created through EAP
  1197. # authentication. RSN preauthentication may still end up using PMKSA caching if
  1198. # it is enabled (rsn_preauth=1).
  1199. # 0 = PMKSA caching enabled (default)
  1200. # 1 = PMKSA caching disabled
  1201. #disable_pmksa_caching=0
  1202.  
  1203. # okc: Opportunistic Key Caching (aka Proactive Key Caching)
  1204. # Allow PMK cache to be shared opportunistically among configured interfaces
  1205. # and BSSes (i.e., all configurations within a single hostapd process).
  1206. # 0 = disabled (default)
  1207. # 1 = enabled
  1208. #okc=1
  1209.  
  1210. # SAE threshold for anti-clogging mechanism (dot11RSNASAEAntiCloggingThreshold)
  1211. # This parameter defines how many open SAE instances can be in progress at the
  1212. # same time before the anti-clogging mechanism is taken into use.
  1213. #sae_anti_clogging_threshold=5
  1214.  
  1215. # Enabled SAE finite cyclic groups
  1216. # SAE implementation are required to support group 19 (ECC group defined over a
  1217. # 256-bit prime order field). All groups that are supported by the
  1218. # implementation are enabled by default. This configuration parameter can be
  1219. # used to specify a limited set of allowed groups. The group values are listed
  1220. # in the IANA registry:
  1221. # http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9
  1222. #sae_groups=19 20 21 25 26
  1223.  
  1224. ##### IEEE 802.11r configuration ##############################################
  1225.  
  1226. # Mobility Domain identifier (dot11FTMobilityDomainID, MDID)
  1227. # MDID is used to indicate a group of APs (within an ESS, i.e., sharing the
  1228. # same SSID) between which a STA can use Fast BSS Transition.
  1229. # 2-octet identifier as a hex string.
  1230. #mobility_domain=a1b2
  1231.  
  1232. # PMK-R0 Key Holder identifier (dot11FTR0KeyHolderID)
  1233. # 1 to 48 octet identifier.
  1234. # This is configured with nas_identifier (see RADIUS client section above).
  1235.  
  1236. # Default lifetime of the PMK-RO in minutes; range 1..65535
  1237. # (dot11FTR0KeyLifetime)
  1238. #r0_key_lifetime=10000
  1239.  
  1240. # PMK-R1 Key Holder identifier (dot11FTR1KeyHolderID)
  1241. # 6-octet identifier as a hex string.
  1242. #r1_key_holder=000102030405
  1243.  
  1244. # Reassociation deadline in time units (TUs / 1.024 ms; range 1000..65535)
  1245. # (dot11FTReassociationDeadline)
  1246. #reassociation_deadline=1000
  1247.  
  1248. # List of R0KHs in the same Mobility Domain
  1249. # format: <MAC address> <NAS Identifier> <128-bit key as hex string>
  1250. # This list is used to map R0KH-ID (NAS Identifier) to a destination MAC
  1251. # address when requesting PMK-R1 key from the R0KH that the STA used during the
  1252. # Initial Mobility Domain Association.
  1253. #r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f
  1254. #r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff
  1255. # And so on.. One line per R0KH.
  1256.  
  1257. # List of R1KHs in the same Mobility Domain
  1258. # format: <MAC address> <R1KH-ID> <128-bit key as hex string>
  1259. # This list is used to map R1KH-ID to a destination MAC address when sending
  1260. # PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD
  1261. # that can request PMK-R1 keys.
  1262. #r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f
  1263. #r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff
  1264. # And so on.. One line per R1KH.
  1265.  
  1266. # Whether PMK-R1 push is enabled at R0KH
  1267. # 0 = do not push PMK-R1 to all configured R1KHs (default)
  1268. # 1 = push PMK-R1 to all configured R1KHs whenever a new PMK-R0 is derived
  1269. #pmk_r1_push=1
  1270.  
  1271. # Whether to enable FT-over-DS
  1272. # 0 = FT-over-DS disabled
  1273. # 1 = FT-over-DS enabled (default)
  1274. #ft_over_ds=1
  1275.  
  1276. ##### Neighbor table ##########################################################
  1277. # Maximum number of entries kept in AP table (either for neigbor table or for
  1278. # detecting Overlapping Legacy BSS Condition). The oldest entry will be
  1279. # removed when adding a new entry that would make the list grow over this
  1280. # limit. Note! WFA certification for IEEE 802.11g requires that OLBC is
  1281. # enabled, so this field should not be set to 0 when using IEEE 802.11g.
  1282. # default: 255
  1283. #ap_table_max_size=255
  1284.  
  1285. # Number of seconds of no frames received after which entries may be deleted
  1286. # from the AP table. Since passive scanning is not usually performed frequently
  1287. # this should not be set to very small value. In addition, there is no
  1288. # guarantee that every scan cycle will receive beacon frames from the
  1289. # neighboring APs.
  1290. # default: 60
  1291. #ap_table_expiration_time=3600
  1292.  
  1293. # Maximum number of stations to track on the operating channel
  1294. # This can be used to detect dualband capable stations before they have
  1295. # associated, e.g., to provide guidance on which colocated BSS to use.
  1296. # Default: 0 (disabled)
  1297. #track_sta_max_num=100
  1298.  
  1299. # Maximum age of a station tracking entry in seconds
  1300. # Default: 180
  1301. #track_sta_max_age=180
  1302.  
  1303. # Do not reply to group-addressed Probe Request from a station that was seen on
  1304. # another radio.
  1305. # Default: Disabled
  1306. #
  1307. # This can be used with enabled track_sta_max_num configuration on another
  1308. # interface controlled by the same hostapd process to restrict Probe Request
  1309. # frame handling from replying to group-addressed Probe Request frames from a
  1310. # station that has been detected to be capable of operating on another band,
  1311. # e.g., to try to reduce likelihood of the station selecting a 2.4 GHz BSS when
  1312. # the AP operates both a 2.4 GHz and 5 GHz BSS concurrently.
  1313. #
  1314. # Note: Enabling this can cause connectivity issues and increase latency for
  1315. # discovering the AP.
  1316. #no_probe_resp_if_seen_on=wlan1
  1317.  
  1318. # Reject authentication from a station that was seen on another radio.
  1319. # Default: Disabled
  1320. #
  1321. # This can be used with enabled track_sta_max_num configuration on another
  1322. # interface controlled by the same hostapd process to reject authentication
  1323. # attempts from a station that has been detected to be capable of operating on
  1324. # another band, e.g., to try to reduce likelihood of the station selecting a
  1325. # 2.4 GHz BSS when the AP operates both a 2.4 GHz and 5 GHz BSS concurrently.
  1326. #
  1327. # Note: Enabling this can cause connectivity issues and increase latency for
  1328. # connecting with the AP.
  1329. #no_auth_if_seen_on=wlan1
  1330.  
  1331. ##### Wi-Fi Protected Setup (WPS) #############################################
  1332.  
  1333. # WPS state
  1334. # 0 = WPS disabled (default)
  1335. # 1 = WPS enabled, not configured
  1336. # 2 = WPS enabled, configured
  1337. #wps_state=2
  1338.  
  1339. # Whether to manage this interface independently from other WPS interfaces
  1340. # By default, a single hostapd process applies WPS operations to all configured
  1341. # interfaces. This parameter can be used to disable that behavior for a subset
  1342. # of interfaces. If this is set to non-zero for an interface, WPS commands
  1343. # issued on that interface do not apply to other interfaces and WPS operations
  1344. # performed on other interfaces do not affect this interface.
  1345. #wps_independent=0
  1346.  
  1347. # AP can be configured into a locked state where new WPS Registrar are not
  1348. # accepted, but previously authorized Registrars (including the internal one)
  1349. # can continue to add new Enrollees.
  1350. #ap_setup_locked=1
  1351.  
  1352. # Universally Unique IDentifier (UUID; see RFC 4122) of the device
  1353. # This value is used as the UUID for the internal WPS Registrar. If the AP
  1354. # is also using UPnP, this value should be set to the device's UPnP UUID.
  1355. # If not configured, UUID will be generated based on the local MAC address.
  1356. #uuid=12345678-9abc-def0-1234-56789abcdef0
  1357.  
  1358. # Note: If wpa_psk_file is set, WPS is used to generate random, per-device PSKs
  1359. # that will be appended to the wpa_psk_file. If wpa_psk_file is not set, the
  1360. # default PSK (wpa_psk/wpa_passphrase) will be delivered to Enrollees. Use of
  1361. # per-device PSKs is recommended as the more secure option (i.e., make sure to
  1362. # set wpa_psk_file when using WPS with WPA-PSK).
  1363.  
  1364. # When an Enrollee requests access to the network with PIN method, the Enrollee
  1365. # PIN will need to be entered for the Registrar. PIN request notifications are
  1366. # sent to hostapd ctrl_iface monitor. In addition, they can be written to a
  1367. # text file that could be used, e.g., to populate the AP administration UI with
  1368. # pending PIN requests. If the following variable is set, the PIN requests will
  1369. # be written to the configured file.
  1370. #wps_pin_requests=/var/run/hostapd_wps_pin_requests
  1371.  
  1372. # Device Name
  1373. # User-friendly description of device; up to 32 octets encoded in UTF-8
  1374. #device_name=Wireless AP
  1375.  
  1376. # Manufacturer
  1377. # The manufacturer of the device (up to 64 ASCII characters)
  1378. #manufacturer=Company
  1379.  
  1380. # Model Name
  1381. # Model of the device (up to 32 ASCII characters)
  1382. #model_name=WAP
  1383.  
  1384. # Model Number
  1385. # Additional device description (up to 32 ASCII characters)
  1386. #model_number=123
  1387.  
  1388. # Serial Number
  1389. # Serial number of the device (up to 32 characters)
  1390. #serial_number=12345
  1391.  
  1392. # Primary Device Type
  1393. # Used format: <categ>-<OUI>-<subcateg>
  1394. # categ = Category as an integer value
  1395. # OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
  1396. # default WPS OUI
  1397. # subcateg = OUI-specific Sub Category as an integer value
  1398. # Examples:
  1399. # 1-0050F204-1 (Computer / PC)
  1400. # 1-0050F204-2 (Computer / Server)
  1401. # 5-0050F204-1 (Storage / NAS)
  1402. # 6-0050F204-1 (Network Infrastructure / AP)
  1403. #device_type=6-0050F204-1
  1404.  
  1405. # OS Version
  1406. # 4-octet operating system version number (hex string)
  1407. #os_version=01020300
  1408.  
  1409. # Config Methods
  1410. # List of the supported configuration methods
  1411. # Available methods: usba ethernet label display ext_nfc_token int_nfc_token
  1412. # nfc_interface push_button keypad virtual_display physical_display
  1413. # virtual_push_button physical_push_button
  1414. #config_methods=label virtual_display virtual_push_button keypad
  1415.  
  1416. # WPS capability discovery workaround for PBC with Windows 7
  1417. # Windows 7 uses incorrect way of figuring out AP's WPS capabilities by acting
  1418. # as a Registrar and using M1 from the AP. The config methods attribute in that
  1419. # message is supposed to indicate only the configuration method supported by
  1420. # the AP in Enrollee role, i.e., to add an external Registrar. For that case,
  1421. # PBC shall not be used and as such, the PushButton config method is removed
  1422. # from M1 by default. If pbc_in_m1=1 is included in the configuration file,
  1423. # the PushButton config method is left in M1 (if included in config_methods
  1424. # parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from a label
  1425. # in the AP).
  1426. #pbc_in_m1=1
  1427.  
  1428. # Static access point PIN for initial configuration and adding Registrars
  1429. # If not set, hostapd will not allow external WPS Registrars to control the
  1430. # access point. The AP PIN can also be set at runtime with hostapd_cli
  1431. # wps_ap_pin command. Use of temporary (enabled by user action) and random
  1432. # AP PIN is much more secure than configuring a static AP PIN here. As such,
  1433. # use of the ap_pin parameter is not recommended if the AP device has means for
  1434. # displaying a random PIN.
  1435. #ap_pin=12345670
  1436.  
  1437. # Skip building of automatic WPS credential
  1438. # This can be used to allow the automatically generated Credential attribute to
  1439. # be replaced with pre-configured Credential(s).
  1440. #skip_cred_build=1
  1441.  
  1442. # Additional Credential attribute(s)
  1443. # This option can be used to add pre-configured Credential attributes into M8
  1444. # message when acting as a Registrar. If skip_cred_build=1, this data will also
  1445. # be able to override the Credential attribute that would have otherwise been
  1446. # automatically generated based on network configuration. This configuration
  1447. # option points to an external file that much contain the WPS Credential
  1448. # attribute(s) as binary data.
  1449. #extra_cred=hostapd.cred
  1450.  
  1451. # Credential processing
  1452. # 0 = process received credentials internally (default)
  1453. # 1 = do not process received credentials; just pass them over ctrl_iface to
  1454. # external program(s)
  1455. # 2 = process received credentials internally and pass them over ctrl_iface
  1456. # to external program(s)
  1457. # Note: With wps_cred_processing=1, skip_cred_build should be set to 1 and
  1458. # extra_cred be used to provide the Credential data for Enrollees.
  1459. #
  1460. # wps_cred_processing=1 will disabled automatic updates of hostapd.conf file
  1461. # both for Credential processing and for marking AP Setup Locked based on
  1462. # validation failures of AP PIN. An external program is responsible on updating
  1463. # the configuration appropriately in this case.
  1464. #wps_cred_processing=0
  1465.  
  1466. # AP Settings Attributes for M7
  1467. # By default, hostapd generates the AP Settings Attributes for M7 based on the
  1468. # current configuration. It is possible to override this by providing a file
  1469. # with pre-configured attributes. This is similar to extra_cred file format,
  1470. # but the AP Settings attributes are not encapsulated in a Credential
  1471. # attribute.
  1472. #ap_settings=hostapd.ap_settings
  1473.  
  1474. # WPS UPnP interface
  1475. # If set, support for external Registrars is enabled.
  1476. #upnp_iface=br0
  1477.  
  1478. # Friendly Name (required for UPnP)
  1479. # Short description for end use. Should be less than 64 characters.
  1480. #friendly_name=WPS Access Point
  1481.  
  1482. # Manufacturer URL (optional for UPnP)
  1483. #manufacturer_url=http://www.example.com/
  1484.  
  1485. # Model Description (recommended for UPnP)
  1486. # Long description for end user. Should be less than 128 characters.
  1487. #model_description=Wireless Access Point
  1488.  
  1489. # Model URL (optional for UPnP)
  1490. #model_url=http://www.example.com/model/
  1491.  
  1492. # Universal Product Code (optional for UPnP)
  1493. # 12-digit, all-numeric code that identifies the consumer package.
  1494. #upc=123456789012
  1495.  
  1496. # WPS RF Bands (a = 5G, b = 2.4G, g = 2.4G, ag = dual band, ad = 60 GHz)
  1497. # This value should be set according to RF band(s) supported by the AP if
  1498. # hw_mode is not set. For dual band dual concurrent devices, this needs to be
  1499. # set to ag to allow both RF bands to be advertized.
  1500. #wps_rf_bands=ag
  1501.  
  1502. # NFC password token for WPS
  1503. # These parameters can be used to configure a fixed NFC password token for the
  1504. # AP. This can be generated, e.g., with nfc_pw_token from wpa_supplicant. When
  1505. # these parameters are used, the AP is assumed to be deployed with a NFC tag
  1506. # that includes the matching NFC password token (e.g., written based on the
  1507. # NDEF record from nfc_pw_token).
  1508. #
  1509. #wps_nfc_dev_pw_id: Device Password ID (16..65535)
  1510. #wps_nfc_dh_pubkey: Hexdump of DH Public Key
  1511. #wps_nfc_dh_privkey: Hexdump of DH Private Key
  1512. #wps_nfc_dev_pw: Hexdump of Device Password
  1513.  
  1514. ##### Wi-Fi Direct (P2P) ######################################################
  1515.  
  1516. # Enable P2P Device management
  1517. #manage_p2p=1
  1518.  
  1519. # Allow cross connection
  1520. #allow_cross_connection=1
  1521.  
  1522. #### TDLS (IEEE 802.11z-2010) #################################################
  1523.  
  1524. # Prohibit use of TDLS in this BSS
  1525. #tdls_prohibit=1
  1526.  
  1527. # Prohibit use of TDLS Channel Switching in this BSS
  1528. #tdls_prohibit_chan_switch=1
  1529.  
  1530. ##### IEEE 802.11v-2011 #######################################################
  1531.  
  1532. # Time advertisement
  1533. # 0 = disabled (default)
  1534. # 2 = UTC time at which the TSF timer is 0
  1535. #time_advertisement=2
  1536.  
  1537. # Local time zone as specified in 8.3 of IEEE Std 1003.1-2004:
  1538. # stdoffset[dst[offset][,start[/time],end[/time]]]
  1539. #time_zone=EST5
  1540.  
  1541. # WNM-Sleep Mode (extended sleep mode for stations)
  1542. # 0 = disabled (default)
  1543. # 1 = enabled (allow stations to use WNM-Sleep Mode)
  1544. #wnm_sleep_mode=1
  1545.  
  1546. # BSS Transition Management
  1547. # 0 = disabled (default)
  1548. # 1 = enabled
  1549. #bss_transition=1
  1550.  
  1551. # Proxy ARP
  1552. # 0 = disabled (default)
  1553. # 1 = enabled
  1554. #proxy_arp=1
  1555.  
  1556. # IPv6 Neighbor Advertisement multicast-to-unicast conversion
  1557. # This can be used with Proxy ARP to allow multicast NAs to be forwarded to
  1558. # associated STAs using link layer unicast delivery.
  1559. # 0 = disabled (default)
  1560. # 1 = enabled
  1561. #na_mcast_to_ucast=0
  1562.  
  1563. ##### IEEE 802.11u-2011 #######################################################
  1564.  
  1565. # Enable Interworking service
  1566. #interworking=1
  1567.  
  1568. # Access Network Type
  1569. # 0 = Private network
  1570. # 1 = Private network with guest access
  1571. # 2 = Chargeable public network
  1572. # 3 = Free public network
  1573. # 4 = Personal device network
  1574. # 5 = Emergency services only network
  1575. # 14 = Test or experimental
  1576. # 15 = Wildcard
  1577. #access_network_type=0
  1578.  
  1579. # Whether the network provides connectivity to the Internet
  1580. # 0 = Unspecified
  1581. # 1 = Network provides connectivity to the Internet
  1582. #internet=1
  1583.  
  1584. # Additional Step Required for Access
  1585. # Note: This is only used with open network, i.e., ASRA shall ne set to 0 if
  1586. # RSN is used.
  1587. #asra=0
  1588.  
  1589. # Emergency services reachable
  1590. #esr=0
  1591.  
  1592. # Unauthenticated emergency service accessible
  1593. #uesa=0
  1594.  
  1595. # Venue Info (optional)
  1596. # The available values are defined in IEEE Std 802.11u-2011, 7.3.1.34.
  1597. # Example values (group,type):
  1598. # 0,0 = Unspecified
  1599. # 1,7 = Convention Center
  1600. # 1,13 = Coffee Shop
  1601. # 2,0 = Unspecified Business
  1602. # 7,1 Private Residence
  1603. #venue_group=7
  1604. #venue_type=1
  1605.  
  1606. # Homogeneous ESS identifier (optional; dot11HESSID)
  1607. # If set, this shall be identifical to one of the BSSIDs in the homogeneous
  1608. # ESS and this shall be set to the same value across all BSSs in homogeneous
  1609. # ESS.
  1610. #hessid=02:03:04:05:06:07
  1611.  
  1612. # Roaming Consortium List
  1613. # Arbitrary number of Roaming Consortium OIs can be configured with each line
  1614. # adding a new OI to the list. The first three entries are available through
  1615. # Beacon and Probe Response frames. Any additional entry will be available only
  1616. # through ANQP queries. Each OI is between 3 and 15 octets and is configured as
  1617. # a hexstring.
  1618. #roaming_consortium=021122
  1619. #roaming_consortium=2233445566
  1620.  
  1621. # Venue Name information
  1622. # This parameter can be used to configure one or more Venue Name Duples for
  1623. # Venue Name ANQP information. Each entry has a two or three character language
  1624. # code (ISO-639) separated by colon from the venue name string.
  1625. # Note that venue_group and venue_type have to be set for Venue Name
  1626. # information to be complete.
  1627. #venue_name=eng:Example venue
  1628. #venue_name=fin:Esimerkkipaikka
  1629. # Alternative format for language:value strings:
  1630. # (double quoted string, printf-escaped string)
  1631. #venue_name=P"eng:Example\nvenue"
  1632.  
  1633. # Network Authentication Type
  1634. # This parameter indicates what type of network authentication is used in the
  1635. # network.
  1636. # format: <network auth type indicator (1-octet hex str)> [redirect URL]
  1637. # Network Authentication Type Indicator values:
  1638. # 00 = Acceptance of terms and conditions
  1639. # 01 = On-line enrollment supported
  1640. # 02 = http/https redirection
  1641. # 03 = DNS redirection
  1642. #network_auth_type=00
  1643. #network_auth_type=02http://www.example.com/redirect/me/here/
  1644.  
  1645. # IP Address Type Availability
  1646. # format: <1-octet encoded value as hex str>
  1647. # (ipv4_type & 0x3f) << 2 | (ipv6_type & 0x3)
  1648. # ipv4_type:
  1649. # 0 = Address type not available
  1650. # 1 = Public IPv4 address available
  1651. # 2 = Port-restricted IPv4 address available
  1652. # 3 = Single NATed private IPv4 address available
  1653. # 4 = Double NATed private IPv4 address available
  1654. # 5 = Port-restricted IPv4 address and single NATed IPv4 address available
  1655. # 6 = Port-restricted IPv4 address and double NATed IPv4 address available
  1656. # 7 = Availability of the address type is not known
  1657. # ipv6_type:
  1658. # 0 = Address type not available
  1659. # 1 = Address type available
  1660. # 2 = Availability of the address type not known
  1661. #ipaddr_type_availability=14
  1662.  
  1663. # Domain Name
  1664. # format: <variable-octet str>[,<variable-octet str>]
  1665. #domain_name=example.com,another.example.com,yet-another.example.com
  1666.  
  1667. # 3GPP Cellular Network information
  1668. # format: <MCC1,MNC1>[;<MCC2,MNC2>][;...]
  1669. #anqp_3gpp_cell_net=244,91;310,026;234,56
  1670.  
  1671. # NAI Realm information
  1672. # One or more realm can be advertised. Each nai_realm line adds a new realm to
  1673. # the set. These parameters provide information for stations using Interworking
  1674. # network selection to allow automatic connection to a network based on
  1675. # credentials.
  1676. # format: <encoding>,<NAI Realm(s)>[,<EAP Method 1>][,<EAP Method 2>][,...]
  1677. # encoding:
  1678. # 0 = Realm formatted in accordance with IETF RFC 4282
  1679. # 1 = UTF-8 formatted character string that is not formatted in
  1680. # accordance with IETF RFC 4282
  1681. # NAI Realm(s): Semi-colon delimited NAI Realm(s)
  1682. # EAP Method: <EAP Method>[:<[AuthParam1:Val1]>][<[AuthParam2:Val2]>][...]
  1683. # EAP Method types, see:
  1684. # http://www.iana.org/assignments/eap-numbers/eap-numbers.xhtml#eap-numbers-4
  1685. # AuthParam (Table 8-188 in IEEE Std 802.11-2012):
  1686. # ID 2 = Non-EAP Inner Authentication Type
  1687. # 1 = PAP, 2 = CHAP, 3 = MSCHAP, 4 = MSCHAPV2
  1688. # ID 3 = Inner authentication EAP Method Type
  1689. # ID 5 = Credential Type
  1690. # 1 = SIM, 2 = USIM, 3 = NFC Secure Element, 4 = Hardware Token,
  1691. # 5 = Softoken, 6 = Certificate, 7 = username/password, 9 = Anonymous,
  1692. # 10 = Vendor Specific
  1693. #nai_realm=0,example.com;example.net
  1694. # EAP methods EAP-TLS with certificate and EAP-TTLS/MSCHAPv2 with
  1695. # username/password
  1696. #nai_realm=0,example.org,13[5:6],21[2:4][5:7]
  1697.  
  1698. # QoS Map Set configuration
  1699. #
  1700. # Comma delimited QoS Map Set in decimal values
  1701. # (see IEEE Std 802.11-2012, 8.4.2.97)
  1702. #
  1703. # format:
  1704. # [<DSCP Exceptions[DSCP,UP]>,]<UP 0 range[low,high]>,...<UP 7 range[low,high]>
  1705. #
  1706. # There can be up to 21 optional DSCP Exceptions which are pairs of DSCP Value
  1707. # (0..63 or 255) and User Priority (0..7). This is followed by eight DSCP Range
  1708. # descriptions with DSCP Low Value and DSCP High Value pairs (0..63 or 255) for
  1709. # each UP starting from 0. If both low and high value are set to 255, the
  1710. # corresponding UP is not used.
  1711. #
  1712. # default: not set
  1713. #qos_map_set=53,2,22,6,8,15,0,7,255,255,16,31,32,39,255,255,40,47,255,255
  1714.  
  1715. ##### Hotspot 2.0 #############################################################
  1716.  
  1717. # Enable Hotspot 2.0 support
  1718. #hs20=1
  1719.  
  1720. # Disable Downstream Group-Addressed Forwarding (DGAF)
  1721. # This can be used to configure a network where no group-addressed frames are
  1722. # allowed. The AP will not forward any group-address frames to the stations and
  1723. # random GTKs are issued for each station to prevent associated stations from
  1724. # forging such frames to other stations in the BSS.
  1725. #disable_dgaf=1
  1726.  
  1727. # OSU Server-Only Authenticated L2 Encryption Network
  1728. #osen=1
  1729.  
  1730. # ANQP Domain ID (0..65535)
  1731. # An identifier for a set of APs in an ESS that share the same common ANQP
  1732. # information. 0 = Some of the ANQP information is unique to this AP (default).
  1733. #anqp_domain_id=1234
  1734.  
  1735. # Deauthentication request timeout
  1736. # If the RADIUS server indicates that the station is not allowed to connect to
  1737. # the BSS/ESS, the AP can allow the station some time to download a
  1738. # notification page (URL included in the message). This parameter sets that
  1739. # timeout in seconds.
  1740. #hs20_deauth_req_timeout=60
  1741.  
  1742. # Operator Friendly Name
  1743. # This parameter can be used to configure one or more Operator Friendly Name
  1744. # Duples. Each entry has a two or three character language code (ISO-639)
  1745. # separated by colon from the operator friendly name string.
  1746. #hs20_oper_friendly_name=eng:Example operator
  1747. #hs20_oper_friendly_name=fin:Esimerkkioperaattori
  1748.  
  1749. # Connection Capability
  1750. # This can be used to advertise what type of IP traffic can be sent through the
  1751. # hotspot (e.g., due to firewall allowing/blocking protocols/ports).
  1752. # format: <IP Protocol>:<Port Number>:<Status>
  1753. # IP Protocol: 1 = ICMP, 6 = TCP, 17 = UDP
  1754. # Port Number: 0..65535
  1755. # Status: 0 = Closed, 1 = Open, 2 = Unknown
  1756. # Each hs20_conn_capab line is added to the list of advertised tuples.
  1757. #hs20_conn_capab=1:0:2
  1758. #hs20_conn_capab=6:22:1
  1759. #hs20_conn_capab=17:5060:0
  1760.  
  1761. # WAN Metrics
  1762. # format: <WAN Info>:<DL Speed>:<UL Speed>:<DL Load>:<UL Load>:<LMD>
  1763. # WAN Info: B0-B1: Link Status, B2: Symmetric Link, B3: At Capabity
  1764. # (encoded as two hex digits)
  1765. # Link Status: 1 = Link up, 2 = Link down, 3 = Link in test state
  1766. # Downlink Speed: Estimate of WAN backhaul link current downlink speed in kbps;
  1767. # 1..4294967295; 0 = unknown
  1768. # Uplink Speed: Estimate of WAN backhaul link current uplink speed in kbps
  1769. # 1..4294967295; 0 = unknown
  1770. # Downlink Load: Current load of downlink WAN connection (scaled to 255 = 100%)
  1771. # Uplink Load: Current load of uplink WAN connection (scaled to 255 = 100%)
  1772. # Load Measurement Duration: Duration for measuring downlink/uplink load in
  1773. # tenths of a second (1..65535); 0 if load cannot be determined
  1774. #hs20_wan_metrics=01:8000:1000:80:240:3000
  1775.  
  1776. # Operating Class Indication
  1777. # List of operating classes the BSSes in this ESS use. The Global operating
  1778. # classes in Table E-4 of IEEE Std 802.11-2012 Annex E define the values that
  1779. # can be used in this.
  1780. # format: hexdump of operating class octets
  1781. # for example, operating classes 81 (2.4 GHz channels 1-13) and 115 (5 GHz
  1782. # channels 36-48):
  1783. #hs20_operating_class=5173
  1784.  
  1785. # OSU icons
  1786. # <Icon Width>:<Icon Height>:<Language code>:<Icon Type>:<Name>:<file path>
  1787. #hs20_icon=32:32:eng:image/png:icon32:/tmp/icon32.png
  1788. #hs20_icon=64:64:eng:image/png:icon64:/tmp/icon64.png
  1789.  
  1790. # OSU SSID (see ssid2 for format description)
  1791. # This is the SSID used for all OSU connections to all the listed OSU Providers.
  1792. #osu_ssid="example"
  1793.  
  1794. # OSU Providers
  1795. # One or more sets of following parameter. Each OSU provider is started by the
  1796. # mandatory osu_server_uri item. The other parameters add information for the
  1797. # last added OSU provider.
  1798. #
  1799. #osu_server_uri=https://example.com/osu/
  1800. #osu_friendly_name=eng:Example operator
  1801. #osu_friendly_name=fin:Esimerkkipalveluntarjoaja
  1802. #osu_method_list=1 0
  1803. #osu_icon=icon32
  1804. #osu_icon=icon64
  1805. #osu_service_desc=eng:Example services
  1806. #osu_service_desc=fin:Esimerkkipalveluja
  1807. #
  1808. #osu_server_uri=...
  1809.  
  1810. ##### Fast Session Transfer (FST) support #####################################
  1811. #
  1812. # The options in this section are only available when the build configuration
  1813. # option CONFIG_FST is set while compiling hostapd. They allow this interface
  1814. # to be a part of FST setup.
  1815. #
  1816. # FST is the transfer of a session from a channel to another channel, in the
  1817. # same or different frequency bands.
  1818. #
  1819. # For detals, see IEEE Std 802.11ad-2012.
  1820.  
  1821. # Identifier of an FST Group the interface belongs to.
  1822. #fst_group_id=bond0
  1823.  
  1824. # Interface priority within the FST Group.
  1825. # Announcing a higher priority for an interface means declaring it more
  1826. # preferable for FST switch.
  1827. # fst_priority is in 1..255 range with 1 being the lowest priority.
  1828. #fst_priority=100
  1829.  
  1830. # Default LLT value for this interface in milliseconds. The value used in case
  1831. # no value provided during session setup. Default is 50 ms.
  1832. # fst_llt is in 1..4294967 range (due to spec limitation, see 10.32.2.2
  1833. # Transitioning between states).
  1834. #fst_llt=100
  1835.  
  1836. ##### TESTING OPTIONS #########################################################
  1837. #
  1838. # The options in this section are only available when the build configuration
  1839. # option CONFIG_TESTING_OPTIONS is set while compiling hostapd. They allow
  1840. # testing some scenarios that are otherwise difficult to reproduce.
  1841. #
  1842. # Ignore probe requests sent to hostapd with the given probability, must be a
  1843. # floating point number in the range [0, 1).
  1844. #ignore_probe_probability=0.0
  1845. #
  1846. # Ignore authentication frames with the given probability
  1847. #ignore_auth_probability=0.0
  1848. #
  1849. # Ignore association requests with the given probability
  1850. #ignore_assoc_probability=0.0
  1851. #
  1852. # Ignore reassociation requests with the given probability
  1853. #ignore_reassoc_probability=0.0
  1854. #
  1855. # Corrupt Key MIC in GTK rekey EAPOL-Key frames with the given probability
  1856. #corrupt_gtk_rekey_mic_probability=0.0
  1857.  
  1858. ##### Multiple BSSID support ##################################################
  1859. #
  1860. # Above configuration is using the default interface (wlan#, or multi-SSID VLAN
  1861. # interfaces). Other BSSIDs can be added by using separator 'bss' with
  1862. # default interface name to be allocated for the data packets of the new BSS.
  1863. #
  1864. # hostapd will generate BSSID mask based on the BSSIDs that are
  1865. # configured. hostapd will verify that dev_addr & MASK == dev_addr. If this is
  1866. # not the case, the MAC address of the radio must be changed before starting
  1867. # hostapd (ifconfig wlan0 hw ether <MAC addr>). If a BSSID is configured for
  1868. # every secondary BSS, this limitation is not applied at hostapd and other
  1869. # masks may be used if the driver supports them (e.g., swap the locally
  1870. # administered bit)
  1871. #
  1872. # BSSIDs are assigned in order to each BSS, unless an explicit BSSID is
  1873. # specified using the 'bssid' parameter.
  1874. # If an explicit BSSID is specified, it must be chosen such that it:
  1875. # - results in a valid MASK that covers it and the dev_addr
  1876. # - is not the same as the MAC address of the radio
  1877. # - is not the same as any other explicitly specified BSSID
  1878. #
  1879. # Not all drivers support multiple BSSes. The exact mechanism for determining
  1880. # the driver capabilities is driver specific. With the current (i.e., a recent
  1881. # kernel) drivers using nl80211, this information can be checked with "iw list"
  1882. # (search for "valid interface combinations").
  1883. #
  1884. # Please note that hostapd uses some of the values configured for the first BSS
  1885. # as the defaults for the following BSSes. However, it is recommended that all
  1886. # BSSes include explicit configuration of all relevant configuration items.
  1887. #
  1888. #bss=wlan0_0
  1889. #ssid=test2
  1890. # most of the above items can be used here (apart from radio interface specific
  1891. # items, like channel)
  1892.  
  1893. #bss=wlan0_1
  1894. #bssid=00:13:10:95:fe:0b
  1895. # ...
Advertisement
Add Comment
Please, Sign In to add comment