API tools faq
paste
Advertisement
Guest User

vvvv

a guest
Sep 22nd, 2014
313
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.73 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2009.11(Dell Force10) (Nov 16 2012 - 05:03:14)
  2. Built by build at tools-sjc-01 on Fri Nov 16 5:03:12 2012
  3. S4810 Boot selector Label 1.2.0.3
  4.  
  5. CPU0: P2020E, Version: 2.0, (0x80ea0020)
  6. Core: E500, Version: 5.0, (0x80211050)
  7. Clock Configuration:
  8. CPU0:1200 MHz, CPU1:1200 MHz,
  9. CCB:600 MHz,
  10. DDR:330 MHz (660 MT/s data rate) (Asynchronous), LBC:37.500 MHz
  11. L1: D-cache 32 kB enabled
  12. I-cache 32 kB enabled
  13. Board: S4810 Dell Force10 Networks
  14. Cpld: S4810 cpld Rev 7
  15. Cpld: Board Revision 2
  16. Cpld: Board Type 1
  17. I2C: ready
  18. DRAM: Initializing.... DDR: 2 GB (DDR3, 64-bit, CL=6, ECC off)
  19. FLASH: 128 MB
  20. L2: 512 KB enabled
  21. MMC: FSL_ESDHC: 0
  22. CPLD: HW Watchdog enabled
  23. eTSEC2 is in sgmii mode.
  24. eTSEC3 is in sgmii mode.
  25.  
  26. PCIE1 used as Root Complex (base addr e000a000)
  27. Scanning PCI bus 01
  28. 01 00 14e4 b845 0200 00
  29. PCIE1 on bus 00 - 01
  30.  
  31. In: serial
  32. Out: serial
  33. Err: serial
  34. Net: eTSEC3: PHY is Broadcom BCM5461S (2060c1)
  35. eTSEC3
  36. Hit any key to stop autoboot: 0
  37. => 2
  38. Unknown command '2' - try 'help'
  39. => 2
  40. Unknown command '2' - try 'help'
  41. => help
  42. ? - alias for 'help'
  43. base - print or set address offset
  44. bdinfo - print Board Info structure
  45. boot - boot default, i.e., run 'bootcmd'
  46. bootd - boot default, i.e., run 'bootcmd'
  47. bootelf - Boot from an ELF image in memory
  48. bootm - boot application image from memory
  49. bootp - boot image via network using BOOTP/TFTP protocol
  50. bootvx - Boot vxWorks from an ELF image
  51. cmp - memory compare
  52. coninfo - print console devices and information
  53. cp - memory copy
  54. crc32 - checksum calculation
  55. echo - echo args to console
  56. editenv - edit environment variable
  57. exit - exit script
  58. ext2load- load binary file from a Ext2 filesystem
  59. ext2ls - list files in a directory (default /)
  60. f10boot - f10boot - Boot NetBSD portion of system image.
  61.  
  62. fdt - flattened device tree utility commands
  63. flinfo - print FLASH memory information
  64. go - start application at address 'addr'
  65. help - print online help
  66. i2c - I2C sub-system
  67. iminfo - print header information for application image
  68. imls - list all images found in flash
  69. imxtract- extract a part of a multi-image
  70. itest - return true/false on integer compare
  71. loadb - load binary file over serial line (kermit mode)
  72. loads - load S-Record file over serial line
  73. loady - load binary file over serial line (ymodem mode)
  74. loop - infinite loop on address range
  75. md - memory display
  76. mii - MII utility commands
  77. mm - memory modify (auto-incrementing address)
  78. mmc - MMC sub system
  79. mmcinfo - mmcinfo <dev num>-- display MMC info
  80.  
  81. mtest - simple RAM read/write test
  82. nfs - boot image via network using NFS protocol
  83. nm - memory modify (constant address)
  84. nvram - nvram operations
  85.  
  86. pci - list and access PCI Configuration Space
  87. ping - send ICMP ECHO_REQUEST to network host
  88. printenv- print environment variables
  89. protect - enable or disable FLASH write protection
  90. rarpboot- boot image via network using RARP/TFTP protocol
  91. reset - Perform RESET of the CPU
  92. run - run commands in an environment variable
  93. saveenv - save environment variables to persistent storage
  94. setenv - set environment variables
  95. setexpr - set environment variable as the result of eval expression
  96. showvar - print local hushshell variables
  97. sleep - delay execution for some time
  98. source - run script from memory
  99. test - minimal test like /bin/sh
  100. tftpboot- boot image via network using TFTP protocol
  101. version - print monitor version
  102. => boot
  103. Booting primary bootline....
  104. Primary bootline not configured...
  105. Failed
  106. Booting secondary bootline....
  107. Secondary bootline not configured...
  108. Failed
  109. Booting default bootline....
  110. f8000000
  111. WARNING: adjusting available memory to 30000000
  112. ## Booting kernel from Legacy Image at f80400f0 ...
  113. Image Name: netbsd
  114. Image Type: PowerPC NetBSD Kernel Image (gzip compressed)
  115. Data Size: 8561039 Bytes = 8.2 MB
  116. Load Address: 00100040
  117. Entry Point: 00100040
  118. Verifying Checksum ... OK
  119. Uncompressing Kernel Image ... OK
  120. CPLD: HW Watchdog disabled
  121. ## Transferring control to NetBSD stage-2 loader (at address 00100040) ...
  122. initppc(0x100040, 0x31ee000, 0x7df6ffb0, 0x0, 0x7ffacec0, 0x7ffacec0)<enter> pixis_spd=0xff sysclk=7 pixis_sysclk=166666667 porpllsr=0x4444140c syss
  123. Loaded initial symtab at 0xc95d50, strtab at 0xd48fa0, # entries 45763
  124. initppc done!
  125. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
  126. 2006, 2007, 2008, 2009, 2010
  127. The NetBSD Foundation, Inc. All rights reserved.
  128. Copyright (c) 1982, 1986, 1989, 1991, 1993
  129. The Regents of the University of California. All rights reserved.
  130.  
  131.  
  132. Dell Force10 Release 9.2(0.2P1)
  133. NetBSD 5.1_STABLE (MPC4810) #0: Fri Nov 29 02:34:23 PST 2013
  134. total memory = 2048 MB
  135. avail memory = 1959 MB
  136. mainbus0 (root)
  137. cpunode0 at mainbus0 node 0
  138. cpunode0: 512KB/32B 8-banked 8-way unified L2 cache
  139. cpu0 at cpunode0 instance 1
  140. cpu0: 1.20 GHz P2020E 2.0 with an e500v2 5.0 core, ID 0 (Primary)
  141. cpu0: 32KB/32B 8-way L1 data cache
  142. cpu0: 32KB/32B 8-way L1 instruction cache
  143. cpu0: 2 TLBs, 3 concurrent 8-bit PIDs (256 total)
  144. cpu0: tlb0: 512 fixed-size (4KB) 4-way set associative entries
  145. cpu0: tlb1: 16 variable-size (4KB..4GB) fully associative entries
  146. cpu1 at cpunode0 instance 2
  147. cpu1: disabled (uniprocessor kernel)
  148. obio0 at cpunode0: 2 of 8 ports enabled
  149. obio0: cs0: 128MB 16-bit GPCM region at 0xf8000000
  150. obio0: cs3: 32KB 8-bit GPCM region at 0xefdf0000
  151. bootflash0 at obio0 cs 0 addr 0xf8000000 size 0x8000000Flash Start Base-address ee013000
  152.  
  153. flash TESTING starts
  154. : Virt addr: 0xee013000: STRATA-P33 128MB bootflash
  155. cpld0 at obio0 cs 3 addr 0xefdf0000 size 0x8000wdog at cpunode0 not configured
  156. duart0 at cpunode0: 2 ports
  157. com0 at duart0 port 1: ns16550a, working fifo
  158. com0: console
  159. com1 at duart0 port 2: ns16550a, working fifo
  160. duart0: interrupting on irq 26
  161. tsec0 at cpunode0 instance 1: mac-address unknown
  162. tsec at cpunode0 instance 2 not configured
  163. tsec2 at cpunode0 instance 3 phy 1
  164.  
  165. tsec2: Ethernet address 00:01:e8:8a:e7:71
  166. brgphy0 at tsec2 phy 1: BCM5461 1000BASE-T media interface, rev. 1
  167. brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
  168. mpc_gpio0 at cpunode0
  169. gpio: interrupting on LVL31 (gpio)
  170. l2ecc0 at cpunode0 interrupting on irq 0
  171. ddrc0 at cpunode0: ECC disabled
  172. pq3pcie0 at cpunode0 instance 1: PCI-Express x2 controller
  173. pci0 at pq3pcie0 bus 0
  174. ppb0 at pci0: Freescale Semiconductor product 0x0070 (rev. 0x20)
  175. pci1 at ppb0 bus 1
  176. nbsd_kbde0 at pci1nbsd_kbde_attach invoked 0
  177. PCI_COMMAND_STATUS_REG VALUE :1048582
  178. BCM device 47173 and revision 3
  179. THIS IS 64 BIT ADDR SPACE
  180. PCI_BAR_LOW :80000004 -- MEMORY MAPPED PCI_BAR_HIGH:0
  181. Address : 0x80000004 Address1 : 0x00000000
  182. Mask : 0xfffc0004 Mask1 : 0xffffffff
  183. PCI BUS HANDLE:80000000 TAG:0xedf41218 ADDR:80000000 SIZE:40000
  184. MEM TAG OF BSC 0xedf41218 VADDR PTR: (0x80000000)
  185. INT REG:00000100
  186.  
  187. enter :kbde_dmamem_alloc
  188. kva=0xf6028000/0x1000000,map=0xe405ae00,nsegs=1,pa=6000000/1000000
  189. DMA VBASE:0xf6028000 DMA PBASE:6000000
  190. pcie at cpunode0 instance 2 not configured
  191. pcie at cpunode0 instance 3 not configured
  192. diic0 at cpunode0: 2 ports
  193. iic0 at diic0: I2C bus
  194. strtc0 at iic0 addr 0x68 : M41ST84 Real-time Clock/NVRAM
  195. s2eeprom0 at iic0 addr 0x52 s2eeprom1 at iic0 addr 0x54 Caching Technique enabled and allocated Memory=400
  196. s2eeprom1: Device
  197. s2eeprom5 at iic0 addr 0x50 Caching Technique enabled and allocated Memory=400
  198. s2eeprom5: Device
  199. iic1 at diic0: I2C bus
  200. tmp75x0 at iic1 addr 0x49 tmp75x1 at iic1 addr 0x4a tmp75x2 at iic1 addr 0x4d tmp75x3 at iic1 addr 0x4c s2eeprom2 at iic1 addr 0x54 Caching Techniqu0
  201. s2eeprom2: Device
  202. s2eeprom3 at iic1 addr 0x50 Caching Technique enabled and allocated Memory=400
  203. s2eeprom3: Device
  204. max6651x0 at iic1 addr 0x48 max6651x1 at iic1 addr 0x4b max6651x2 at iic1 addr 0x1b max6651x3 at iic1 addr 0x1f ltc4215x0 at iic1 addr 0x42 ltc4215xr
  205. spi at cpunode0 not configured
  206. sdhc0 at cpunode0: SDHC controller (DMA enabled)
  207. sdhc0: interrupting on irq 56
  208. sdhc0: SD Host Specification 2.0, rev.1
  209. sdhc0: using DMA transfer
  210. sdmmc0 at sdhc0 slot 0
  211. sdmmc0: attach card
  212. ld0 at sdmmc0mid=0x11 oid=0x4a43 pnm="004GB" rev=0x01 psn=0x00000c38 mdt=113
  213. : <004GB>
  214. ld0: 8003 MB, 4065 cyl, 64 head, 63 sec, 512 bytes/sect x 16390144 sectors
  215. ld0: 4-bit width, bus clock 25.000 MHz
  216. bcnp pseudo-device
  217. bcmw pseudo-device
  218. bcmwstk pseudo-device
  219. bcmws pseudo-device
  220. Too many symbols for tree, skipping 12996 symbols
  221. ust pseudo device
  222. sierradiag as pseudo-device
  223. crshntfy pseudo-device
  224. bfd pseudo-device
  225. bshell pseudo-device
  226. f10logger as pseudo-device getting attached
  227. sfpx pseudo-device
  228. f10mc pseudo-device
  229. root on md0a dumps on md0b
  230. mountroot: trying ffs...
  231. root file system type: ffs
  232. WARNING: clock gained 297 days
  233. WARNING: CHECK AND RESET THE DATE!
  234. 2ignoring SIGQUIT SIGTSTP and SIGINFO
  235. add net 127.0.0.0: gateway 127.0.0.1
  236. 2add host 10.4.200.4: gateway 127.0.0.1
  237. add net 10.4.200.0: gateway 10.4.200.4
  238. add net 0.0.0.0: gateway 0.0.0.0: Network is unreachable
  239. Reading Release Image at 0x40000 Part: A
  240. Size of ReleaseImage is 39609617 Bytes
  241. ^R
  242.  
  243.  
  244.  
  245.  
  246. RELEASE IMAGE HEADER DATA :
  247. --------------------------
  248. Release Image SW Image Count : 3
  249. Release Image Major-Version : 9
  250. Release Image Minor Version : 2
  251. Release Image Maint Version : 0
  252. Release Image Patch-Version : 2
  253. Release Image Header Size : 140
  254. Release Image Data Size : 39609477
  255. Release Image Platform Type : 8
  256. Release Image Product Name : FTOS-SE
  257. Release Image Checksum Value : 0x26a7fae6
  258. Release Image Header Checksum: 0x6cc1b1b0
  259. Release Image Create Year : 2013
  260. Release Image Create Month : 11
  261. Release Image Create Date : 29
  262. Release Image Create Hour : 2
  263. Release Image Create Minute : 47
  264. Release Image Create Second : 34
  265.  
  266. SOFTWARE IMAGE HEADER DATA :
  267. ----------------------------
  268. Software Image[1] Major Version : 9
  269. Software Image[1] Minor Version : 2
  270. Software Image[1] Maint Version : 0
  271. Software Image[1] Patch Version : 2
  272. Software Image[1] Image type : 2
  273. Software Image[1] Header Size : 100
  274. Software Image[1] Img Data Size : 8561120
  275. Software Image[1] Img Orig Size : 8561120
  276. Software Image[1] Family Code : cp
  277. Software Image[1] Img file Name : CPRPLP-RPM-AP-9.2.0.2P1.bin
  278. Software Image[1] Hdr Checksum : 0x9051888f
  279. Software Image[1] Data Checksum : 0xee7ad3f2
  280.  
  281. SOFTWARE IMAGE HEADER DATA :
  282. ----------------------------
  283. Software Image[2] Major Version : 9
  284. Software Image[2] Minor Version : 2
  285. Software Image[2] Maint Version : 0
  286. Software Image[2] Patch Version : 2
  287. Software Image[2] Image type : 2
  288. Software Image[2] Header Size : 100
  289. Software Image[2] Img Data Size : 15788580
  290. Software Image[2] Img Orig Size : 41420816
  291. Software Image[2] Family Code : nbsdpcprplp
  292. Software Image[2] Img file Name : NBSDPCPRPLP-RPM-AP-9.2.0.2P1.bin
  293. Software Image[2] Hdr Checksum : 0x18429288
  294. Software Image[2] Data Checksum : 0x9d2f61f2
  295. 2
  296. SOFTWARE IMAGE HEADER DATA :
  297. ----------------------------
  298. Software Image[3] Major Version : 9
  299. Software Image[3] Minor Version : 2
  300. Software Image[3] Maint Version : 0
  301. Software Image[3] Patch Version : 2
  302. Software Image[3] Image type : 2
  303. Software Image[3] Header Size : 100
  304. Software Image[3] Img Data Size : 15259477
  305. Software Image[3] Img Orig Size : 31406096
  306. Software Image[3] Family Code : nbsdlibcp
  307. Software Image[3] Img file Name : NBSDLIBCP-RPM-AP-9.2.0.2P1.bin
  308. Software Image[3] Hdr Checksum : 0xec28beb7
  309. Software Image[3] Data Checksum : 0x3c3b6201
  310. delete host 10.4.200.4: gateway 127.0.0.1
  311. delete net 10.4.200.0: gateway 10.4.200.4
  312. delete net 0.0.0.0: gateway 0.0.0.0: not in table
  313. Setting throttling levels...
  314. netbsd:throttle_count 0x1 = 0x6
  315.  
  316. netbsd:orange 0xc = 0xa
  317.  
  318. netbsd:red 0x20 = 0x10
  319.  
  320. ...Done
  321.  
  322. ** /dev/rld0g
  323. ** Last Mounted on /usr/pkg
  324. ** Phase 1 - Check Blocks and Sizes
  325.  
  326. ** Phase 2 - Check Pathnames
  327. ** Phase 3 - Check Connectivity
  328. ** Phase 4 - Check Reference Counts
  329. ** Phase 5 - Check Cyl groups
  330. 19 files, 19 used, 2312420 free (36 frags, 289048 blocks, 0.0% fragmentation)
  331.  
  332. MARK FILE SYSTEM CLEAN? yes
  333.  
  334.  
  335. ***** FILE SYSTEM MARKED CLEAN *****
  336.  
  337. ***** FILE SYSTEM WAS MODIFIED *****
  338.  
  339. Starting Dell Force10 application
  340.  
  341.  
  342.  
  343.  
  344.  
  345.  
  346. 00:00:40: %STKUNIT2-M:CP %RAM-6-ELECTION_ROLE: Stack unit 2 is transitioning to Management unit.
  347. 00:00:41: %STKUNIT2-M:CP %CHMGR-5-STACKUNITDETECTED: Stack unit 2 present
  348.  
  349. 00:00:42: %STKUNIT2-M:CP %CHMGR-5-CHECKIN: Checkin from Stack unit 2 (type S4810, 64 ports)
  350. 00:00:45: %STKUNIT2-M:CP %CHMGR-0-PS_DOWN: Major alarm: Power supply 0 in unit 2 is down
  351. 00:00:45: %STKUNIT2-M:CP %CHMGR-0-PS_UP: Power supply 1 in unit 2 is up
  352. 00:00:48: %STKUNIT2-M:CP %CHMGR-5-STACKUNITUP: Stack unit 2 is up
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!