Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- papapenguin ~ # dmesg
- [ 0.000000] Linux version 3.8.13-gentoo (root@papapenguin) (gcc version 4.7.3 (Gentoo 4.7.3 p1.0, pie-0.5.5) ) #1 SMP PREEMPT Mon May 20 11:20:50 PDT 2013
- [ 0.000000] Command line: root=/dev/sda3
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000abefffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000abf00000-0x00000000abf14fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000abf15000-0x00000000abf7ffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000abf80000-0x00000000afffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: Hewlett-Packard Presario V6000 (RM531PA#ABG) /30B7, BIOS F.3D 11/22/2007
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x150000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-D3FFF write-protect
- [ 0.000000] D4000-E3FFF uncachable
- [ 0.000000] E4000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
- [ 0.000000] 2 base 00A0000000 mask FFF8000000 write-back
- [ 0.000000] 3 base 00A8000000 mask FFFC000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000150000000 aka 5376M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xac000000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xabf00 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0xabefffff]
- [ 0.000000] [mem 0x00000000-0xabdfffff] page 2M
- [ 0.000000] [mem 0xabe00000-0xabefffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0xabefffff @ [mem 0x1fffb000-0x1fffffff]
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14fffffff]
- [ 0.000000] [mem 0x100000000-0x14fffffff] page 2M
- [ 0.000000] kernel direct mapping tables up to 0x14fffffff @ [mem 0xabefd000-0xabefffff]
- [ 0.000000] Compaq Presario V6000: using 0xed I/O delay port
- [ 0.000000] ACPI: RSDP 00000000000f88f0 00014 (v00 HP )
- [ 0.000000] ACPI: RSDT 00000000abf0bd23 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
- [ 0.000000] ACPI: FACP 00000000abf14d10 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240)
- [ 0.000000] ACPI: DSDT 00000000abf0bd5f 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000)
- [ 0.000000] ACPI: FACS 00000000abf15fc0 00040
- [ 0.000000] ACPI: SSDT 00000000abf14d84 00182 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
- [ 0.000000] ACPI: MCFG 00000000abf14f06 0003C (v01 HP MCFG 06040000 LTP 00000000)
- [ 0.000000] ACPI: HPET 00000000abf14f42 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
- [ 0.000000] ACPI: APIC 00000000abf14f7a 0005E (v01 HP ? APIC 06040000 LTP 00000000)
- [ 0.000000] ACPI: BOOT 00000000abf14fd8 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014b600000-ffff88014f5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x14fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0xabefffff]
- [ 0.000000] node 0: [mem 0x100000000-0x14fffffff]
- [ 0.000000] On node 0 totalpages: 1031821
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 10940 pages used for memmap
- [ 0.000000] DMA32 zone: 689220 pages, LIFO batch:31
- [ 0.000000] Normal zone: 5120 pages used for memmap
- [ 0.000000] Normal zone: 322560 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88014fc00000 s73664 r8192 d20544 u1048576
- [ 0.000000] pcpu-alloc: s73664 r8192 d20544 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1015691
- [ 0.000000] Kernel command line: root=/dev/sda3
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ 1d8c000000 size 32 MB
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ a0000000
- [ 0.000000] Memory: 3911532k/5505024k available (6090k kernel code, 1377740k absent, 215752k reserved, 4777k data, 528k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU debugfs-based tracing is enabled.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 1607.350 MHz processor
- [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
- [ 0.001153] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.70 BogoMIPS (lpj=1607350)
- [ 0.001458] pid_max: default: 32768 minimum: 301
- [ 0.001659] Mount-cache hash table entries: 256
- [ 0.002242] tseg: 00abf80000
- [ 0.002245] CPU: Physical Processor ID: 0
- [ 0.002394] CPU: Processor Core ID: 0
- [ 0.002542] mce: CPU supports 5 MCE banks
- [ 0.002696] LVT offset 0 assigned for vector 0xf9
- [ 0.002850] process: using AMD E400 aware idle routine
- [ 0.003005] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
- tlb_flushall_shift: 4
- [ 0.003496] Freeing SMP alternatives: 20k freed
- [ 0.003664] ACPI: Core revision 20121018
- [ 0.008469] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.018644] smpboot: CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (fam: 0f, model: 48, stepping: 02)
- [ 0.020000] Performance Events: AMD PMU driver.
- [ 0.020000] ... version: 0
- [ 0.020000] ... bit width: 48
- [ 0.020000] ... generic registers: 4
- [ 0.020000] ... value mask: 0000ffffffffffff
- [ 0.020000] ... max period: 00007fffffffffff
- [ 0.020000] ... fixed-purpose events: 0
- [ 0.020002] ... event mask: 000000000000000f
- [ 0.020191] process: System has AMD C1E enabled
- [ 0.020354] process: Switch to broadcast mode on CPU0
- [ 0.030062] smpboot: Booting Node 0, Processors #1 OK
- [ 0.002000] process: Switch to broadcast mode on CPU1
- [ 0.101063] Brought up 2 CPUs
- [ 0.101065] smpboot: Total of 2 processors activated (6429.24 BogoMIPS)
- [ 0.102003] devtmpfs: initialized
- [ 0.102345] NET: Registered protocol family 16
- [ 0.102345] kworker/u:0 (20) used greatest stack depth: 6856 bytes left
- [ 0.103026] kworker/u:0 (21) used greatest stack depth: 6488 bytes left
- [ 0.103209] node 0 link 0: io port [1000, fffff]
- [ 0.103209] TOM: 00000000b0000000 aka 2816M
- [ 0.103209] node 0 link 0: mmio [e0000000, efffffff]
- [ 0.103209] node 0 link 0: mmio [a0000, bffff]
- [ 0.103209] node 0 link 0: mmio [b0000000, fe0bffff]
- [ 0.103209] TOM2: 0000000150000000 aka 5376M
- [ 0.103370] bus: [bus 00-ff] on node 0 link 0
- [ 0.103373] bus: 00 [io 0x0000-0xffff]
- [ 0.103375] bus: 00 [mem 0xb0000000-0xffffffff]
- [ 0.103377] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.103379] bus: 00 [mem 0x150000000-0xfcffffffff]
- [ 0.103425] ACPI: bus type pci registered
- [ 0.104067] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
- [ 0.104310] PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820
- [ 0.104310] PCI: Using configuration type 1 for base access
- [ 0.105062] kworker/u:0 (36) used greatest stack depth: 6104 bytes left
- [ 0.118071] bio: create slab <bio-0> at 0
- [ 0.119040] ACPI: Added _OSI(Module Device)
- [ 0.119207] ACPI: Added _OSI(Processor Device)
- [ 0.119369] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.119530] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.119752] ACPI: EC: Look up EC in DSDT
- [ 0.122345] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.122947] ACPI: Interpreter enabled
- [ 0.123004] ACPI: (supports S0 S5)
- [ 0.123233] ACPI: Using IOAPIC for interrupt routing
- [ 0.135105] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
- [ 0.135326] ACPI: No dock devices found.
- [ 0.135349] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.136086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.136239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.136392] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.136395] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.136399] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.136402] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
- [ 0.136406] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
- [ 0.136409] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
- [ 0.136412] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
- [ 0.136416] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
- [ 0.136419] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
- [ 0.136423] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
- [ 0.136426] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
- [ 0.136430] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
- [ 0.136433] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
- [ 0.136437] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
- [ 0.136440] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
- [ 0.136445] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
- [ 0.136449] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xfebfffff] (ignored)
- [ 0.136452] PCI: root bus 00: hardware-probed resources
- [ 0.136459] pci_root PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-06] only partially covers this bridge
- [ 0.137032] PCI host bridge to bus 0000:00
- [ 0.137178] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.137332] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.137485] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
- [ 0.137637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.137791] pci_bus 0000:00: root bus resource [mem 0x150000000-0xfcffffffff]
- [ 0.138015] pci 0000:00:00.0: [10de:02f0] type 00 class 0x050000
- [ 0.138069] pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
- [ 0.138102] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
- [ 0.138143] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
- [ 0.138185] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
- [ 0.138227] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
- [ 0.138272] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
- [ 0.138305] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
- [ 0.138351] pci 0000:00:02.0: [10de:02fc] type 01 class 0x060400
- [ 0.138385] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138402] pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
- [ 0.138433] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.138449] pci 0000:00:05.0: [10de:0244] type 00 class 0x030000
- [ 0.138458] pci 0000:00:05.0: reg 10: [mem 0xb2000000-0xb2ffffff]
- [ 0.138467] pci 0000:00:05.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.138474] pci 0000:00:05.0: reg 1c: [mem 0xb1000000-0xb1ffffff 64bit]
- [ 0.138483] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.138527] pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
- [ 0.138728] pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
- [ 0.138738] pci 0000:00:0a.0: reg 10: [io 0x1d00-0x1d7f]
- [ 0.138787] pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
- [ 0.138826] pci 0000:00:0a.1: reg 20: [io 0x3040-0x307f]
- [ 0.138836] pci 0000:00:0a.1: reg 24: [io 0x3000-0x303f]
- [ 0.138875] pci 0000:00:0a.1: PME# supported from D3hot D3cold
- [ 0.138902] pci 0000:00:0a.3: [10de:0271] type 00 class 0x0b4000
- [ 0.138922] pci 0000:00:0a.3: reg 10: [mem 0xb0040000-0xb007ffff]
- [ 0.139073] pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
- [ 0.139089] pci 0000:00:0b.0: reg 10: [mem 0xb0004000-0xb0004fff]
- [ 0.139148] pci 0000:00:0b.0: supports D1 D2
- [ 0.139152] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.139172] pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
- [ 0.139187] pci 0000:00:0b.1: reg 10: [mem 0xb0005000-0xb00050ff]
- [ 0.139245] pci 0000:00:0b.1: supports D1 D2
- [ 0.139249] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.139274] pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
- [ 0.139303] pci 0000:00:0d.0: reg 20: [io 0x3080-0x308f]
- [ 0.139345] pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
- [ 0.139360] pci 0000:00:0e.0: reg 10: [io 0x30c0-0x30c7]
- [ 0.139368] pci 0000:00:0e.0: reg 14: [io 0x30b4-0x30b7]
- [ 0.139376] pci 0000:00:0e.0: reg 18: [io 0x30b8-0x30bf]
- [ 0.139384] pci 0000:00:0e.0: reg 1c: [io 0x30b0-0x30b3]
- [ 0.139392] pci 0000:00:0e.0: reg 20: [io 0x3090-0x309f]
- [ 0.139401] pci 0000:00:0e.0: reg 24: [mem 0xb0006000-0xb0006fff]
- [ 0.139451] pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
- [ 0.139506] pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
- [ 0.139522] pci 0000:00:10.1: reg 10: [mem 0xb0000000-0xb0003fff]
- [ 0.139582] pci 0000:00:10.1: PME# supported from D3hot D3cold
- [ 0.139610] pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
- [ 0.139622] pci 0000:00:14.0: reg 10: [mem 0xb0008000-0xb0008fff]
- [ 0.139630] pci 0000:00:14.0: reg 14: [io 0x30e0-0x30e7]
- [ 0.139671] pci 0000:00:14.0: supports D1 D2
- [ 0.139675] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.139690] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.139716] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.139736] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.139757] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.139810] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.139966] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
- [ 0.139970] pci 0000:00:02.0: bridge window [mem 0xb4000000-0xb5ffffff]
- [ 0.139975] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
- [ 0.140050] pci 0000:03:00.0: [14e4:4311] type 00 class 0x028000
- [ 0.140064] pci 0000:03:00.0: reg 10: [mem 0xb6000000-0xb6003fff]
- [ 0.140143] pci 0000:03:00.0: supports D1 D2
- [ 0.140158] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.140424] pci 0000:00:03.0: PCI bridge to [bus 03]
- [ 0.140578] pci 0000:00:03.0: bridge window [mem 0xb6000000-0xb7ffffff]
- [ 0.140616] pci 0000:07:05.0: [1180:0832] type 00 class 0x0c0010
- [ 0.140632] pci 0000:07:05.0: reg 10: [mem 0xb8000000-0xb80007ff]
- [ 0.140694] pci 0000:07:05.0: supports D1 D2
- [ 0.140697] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.140715] pci 0000:07:05.1: [1180:0822] type 00 class 0x080500
- [ 0.140731] pci 0000:07:05.1: reg 10: [mem 0xb8000800-0xb80008ff]
- [ 0.140793] pci 0000:07:05.1: supports D1 D2
- [ 0.140796] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.140814] pci 0000:07:05.2: [1180:0843] type 00 class 0x088000
- [ 0.140830] pci 0000:07:05.2: reg 10: [mem 0xb8000c00-0xb8000cff]
- [ 0.140891] pci 0000:07:05.2: supports D1 D2
- [ 0.140895] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.140913] pci 0000:07:05.3: [1180:0592] type 00 class 0x088000
- [ 0.140929] pci 0000:07:05.3: reg 10: [mem 0xb8001000-0xb80010ff]
- [ 0.140990] pci 0000:07:05.3: supports D1 D2
- [ 0.140994] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.141020] pci 0000:07:05.4: [1180:0852] type 00 class 0x088000
- [ 0.141036] pci 0000:07:05.4: reg 10: [mem 0xb8001400-0xb80014ff]
- [ 0.141098] pci 0000:07:05.4: supports D1 D2
- [ 0.141101] pci 0000:07:05.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.141143] pci 0000:00:10.0: PCI bridge to [bus 07] (subtractive decode)
- [ 0.141298] pci 0000:00:10.0: bridge window [mem 0xb8000000-0xb80fffff]
- [ 0.141303] pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.141307] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
- [ 0.141310] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.141314] pci 0000:00:10.0: bridge window [mem 0x150000000-0xfcffffffff] (subtractive decode)
- [ 0.141324] pci_bus 0000:00: on NUMA node 0
- [ 0.141368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
- [ 0.141412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
- [ 0.141443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
- [ 0.141467] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.141733] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.145175] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
- [ 0.146152] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
- [ 0.146552] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11
- [ 0.146949] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
- [ 0.147393] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
- [ 0.147817] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
- [ 0.148263] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11
- [ 0.148648] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
- [ 0.149096] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
- [ 0.149453] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
- [ 0.149843] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
- [ 0.150266] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
- [ 0.150651] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
- [ 0.151106] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
- [ 0.151574] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
- [ 0.151574] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
- [ 0.151574] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
- [ 0.151874] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
- [ 0.152247] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
- [ 0.153134] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.154000] vgaarb: loaded
- [ 0.154000] vgaarb: bridge control possible 0000:00:05.0
- [ 0.154043] SCSI subsystem initialized
- [ 0.155000] ACPI: bus type scsi registered
- [ 0.156057] libata version 3.00 loaded.
- [ 0.156057] ACPI: bus type usb registered
- [ 0.156208] usbcore: registered new interface driver usbfs
- [ 0.156208] usbcore: registered new interface driver hub
- [ 0.156208] usbcore: registered new device driver usb
- [ 0.157044] Linux video capture interface: v2.00
- [ 0.157189] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.157192] PCI: Using ACPI for IRQ routing
- [ 0.157192] PCI: pci_cache_line_size set to 64 bytes
- [ 0.157240] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
- [ 0.157243] e820: reserve RAM buffer [mem 0xabf00000-0xabffffff]
- [ 0.158155] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.159001] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
- [ 0.159001] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
- [ 0.161001] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.163049] Switching to clocksource hpet
- [ 0.170706] pnp: PnP ACPI init
- [ 0.170884] ACPI: bus type pnp registered
- [ 0.171230] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.171397] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.171982] system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
- [ 0.172183] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.172350] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.172518] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
- [ 0.172677] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.172830] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.172986] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.173340] system 00:03: [io 0x1000-0x107f] has been reserved
- [ 0.173498] system 00:03: [io 0x1080-0x10ff] has been reserved
- [ 0.173648] system 00:03: [io 0x1400-0x147f] has been reserved
- [ 0.173799] system 00:03: [io 0x1480-0x14ff] has been reserved
- [ 0.173952] system 00:03: [io 0x1800-0x187f] has been reserved
- [ 0.174135] system 00:03: [io 0x1880-0x18ff] has been reserved
- [ 0.174299] system 00:03: [io 0x2000-0x203f] has been reserved
- [ 0.174466] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.174596] system 00:04: [io 0x0360-0x0361] has been reserved
- [ 0.174749] system 00:04: [io 0x0380-0x0383] has been reserved
- [ 0.174903] system 00:04: [io 0x04d0-0x04d1] has been reserved
- [ 0.175083] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.175103] pnp 00:05: [dma 4]
- [ 0.175188] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.175275] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.175384] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.175514] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.175661] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.175763] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.175861] pnp 00:0b: Plug and Play ACPI device, IDs SYN012a SYN0100 SYN0002 PNP0f13 (active)
- [ 0.176384] pnp: PnP ACPI: found 12 devices
- [ 0.176547] ACPI: ACPI bus type pnp unregistered
- [ 0.181426] pci 0000:00:05.0: BAR 6: assigned [mem 0xb0020000-0xb003ffff pref]
- [ 0.181691] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.181842] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
- [ 0.181994] pci 0000:00:02.0: bridge window [mem 0xb4000000-0xb5ffffff]
- [ 0.182171] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
- [ 0.182433] pci 0000:00:03.0: PCI bridge to [bus 03]
- [ 0.182585] pci 0000:00:03.0: bridge window [mem 0xb6000000-0xb7ffffff]
- [ 0.182743] pci 0000:00:10.0: PCI bridge to [bus 07]
- [ 0.182895] pci 0000:00:10.0: bridge window [mem 0xb8000000-0xb80fffff]
- [ 0.183086] pci 0000:00:10.0: setting latency timer to 64
- [ 0.183091] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.183094] pci_bus 0000:00: resource 5 [mem 0xb0000000-0xffffffff]
- [ 0.183098] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.183101] pci_bus 0000:00: resource 7 [mem 0x150000000-0xfcffffffff]
- [ 0.183105] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
- [ 0.183108] pci_bus 0000:01: resource 1 [mem 0xb4000000-0xb5ffffff]
- [ 0.183112] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
- [ 0.183115] pci_bus 0000:03: resource 1 [mem 0xb6000000-0xb7ffffff]
- [ 0.183119] pci_bus 0000:07: resource 1 [mem 0xb8000000-0xb80fffff]
- [ 0.183122] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
- [ 0.183126] pci_bus 0000:07: resource 5 [mem 0xb0000000-0xffffffff]
- [ 0.183129] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.183132] pci_bus 0000:07: resource 7 [mem 0x150000000-0xfcffffffff]
- [ 0.183191] NET: Registered protocol family 2
- [ 0.183494] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.184104] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.184618] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.184860] TCP: reno registered
- [ 0.185035] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.185235] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.185532] NET: Registered protocol family 1
- [ 0.185829] RPC: Registered named UNIX socket transport module.
- [ 0.186000] RPC: Registered udp transport module.
- [ 0.186177] RPC: Registered tcp transport module.
- [ 0.186327] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.186499] pci 0000:00:00.0: Found disabled HT MSI Mapping
- [ 0.186654] pci 0000:00:00.0: Enabling HT MSI Mapping
- [ 0.186845] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.187029] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.187187] pci 0000:00:05.0: Boot video device
- [ 0.187448] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
- [ 0.452224] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
- [ 0.452460] pci 0000:00:09.0: Found enabled HT MSI Mapping
- [ 0.452666] pci 0000:00:09.0: Found enabled HT MSI Mapping
- [ 0.452874] pci 0000:00:09.0: Found enabled HT MSI Mapping
- [ 0.453073] PCI: CLS 64 bytes, default 64
- [ 0.453511] PCI-DMA: Disabling AGP.
- [ 0.453776] PCI-DMA: aperture base @ a0000000 size 65536 KB
- [ 0.453940] PCI-DMA: using GART IOMMU.
- [ 0.454124] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 0.458987] Simple Boot Flag at 0x36 set to 0x1
- [ 0.459910] microcode: AMD CPU family 0xf not supported
- [ 0.461249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.468633] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.469500] msgmni has been set to 7768
- [ 0.472518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.472814] io scheduler noop registered
- [ 0.472982] io scheduler cfq registered (default)
- [ 0.473372] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 0.473497] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
- [ 0.486395] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.487556] Linux agpgart interface v0.103
- [ 0.487726] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
- [ 0.487998] Hangcheck: Using getrawmonotonic().
- [ 0.488659] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.489279] ACPI: AC Adapter [ACAD] (on-line)
- [ 0.489666] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.489945] ACPI: Power Button [PWRB]
- [ 0.490220] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
- [ 0.490482] ACPI: Sleep Button [SLPB]
- [ 0.490740] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
- [ 0.491235] ACPI: Lid Switch [LID]
- [ 0.491526] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 0.491792] ACPI: Power Button [PWRF]
- [ 0.494801] acpi device:22: registered as cooling_device0
- [ 0.494996] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
- [ 0.495288] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
- [ 0.495686] ACPI: processor limited to max C-state 1
- [ 0.497107] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.497267] ACPI: Thermal Zone [THRM] (90 C)
- [ 0.497959] [drm] Initialized drm 1.1.0 20060810
- [ 0.500360] loop: module loaded
- [ 0.500988] sata_nv 0000:00:0e.0: version 3.5
- [ 0.500999] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
- [ 0.501464] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
- [ 0.501637] sata_nv 0000:00:0e.0: Using SWNCQ mode
- [ 0.501863] sata_nv 0000:00:0e.0: setting latency timer to 64
- [ 0.502600] scsi0 : sata_nv
- [ 0.503110] scsi1 : sata_nv
- [ 0.503553] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23
- [ 0.503723] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23
- [ 0.504133] pata_amd 0000:00:0d.0: version 0.4.1
- [ 0.504180] pata_amd 0000:00:0d.0: setting latency timer to 64
- [ 0.505492] scsi2 : pata_amd
- [ 0.506162] scsi3 : pata_amd
- [ 0.506751] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
- [ 0.506908] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
- [ 0.507978] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
- [ 0.559092] firewire_ohci 0000:07:05.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
- [ 0.559725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.559877] ehci-pci: EHCI PCI platform driver
- [ 0.560106] ehci-pci 0000:00:0b.1: setting latency timer to 64
- [ 0.560110] ehci-pci 0000:00:0b.1: EHCI Host Controller
- [ 0.560376] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
- [ 0.560652] ehci-pci 0000:00:0b.1: debug port 1
- [ 0.560828] ehci-pci 0000:00:0b.1: cache line size of 64 is not supported
- [ 0.560857] ehci-pci 0000:00:0b.1: irq 22, io mem 0xb0005000
- [ 0.567032] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
- [ 0.567217] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.567370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.567632] usb usb1: Product: EHCI Host Controller
- [ 0.567782] usb usb1: Manufacturer: Linux 3.8.13-gentoo ehci_hcd
- [ 0.567935] usb usb1: SerialNumber: 0000:00:0b.1
- [ 0.568335] hub 1-0:1.0: USB hub found
- [ 0.568491] hub 1-0:1.0: 8 ports detected
- [ 0.568846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.569069] ohci_hcd 0000:00:0b.0: setting latency timer to 64
- [ 0.569073] ohci_hcd 0000:00:0b.0: OHCI Host Controller
- [ 0.569344] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
- [ 0.569631] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000
- [ 0.622065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.622221] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.622482] usb usb2: Product: OHCI Host Controller
- [ 0.622633] usb usb2: Manufacturer: Linux 3.8.13-gentoo ohci_hcd
- [ 0.622785] usb usb2: SerialNumber: 0000:00:0b.0
- [ 0.623207] hub 2-0:1.0: USB hub found
- [ 0.623364] hub 2-0:1.0: 8 ports detected
- [ 0.623961] usbcore: registered new interface driver usbtmc
- [ 0.624144] Initializing USB Mass Storage driver...
- [ 0.624384] usbcore: registered new interface driver usb-storage
- [ 0.624541] USB Mass Storage support registered.
- [ 0.624854] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
- [ 0.640542] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.640727] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.641227] mousedev: PS/2 mouse device common for all mice
- [ 0.642152] rtc_cmos 00:08: RTC can wake from S4
- [ 0.642550] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
- [ 0.642748] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
- [ 0.642965] i2c /dev entries driver
- [ 0.643365] usbcore: registered new interface driver uvcvideo
- [ 0.643517] USB Video Class driver (1.1.1)
- [ 0.643665] gspca_main: v2.14.0 registered
- [ 0.643880] usbcore: registered new interface driver sn9c2028
- [ 0.644120] usbcore: registered new interface driver sonixb
- [ 0.644335] usbcore: registered new interface driver sonixj
- [ 0.644561] usbcore: registered new interface driver spca561
- [ 0.644780] usbcore: registered new interface driver gspca_zc3xx
- [ 0.645197] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
- [ 0.645478] cpuidle: using governor ladder
- [ 0.645626] cpuidle: using governor menu
- [ 0.645835] sdhci: Secure Digital Host Controller Interface driver
- [ 0.645992] sdhci: Copyright(c) Pierre Ossman
- [ 0.646194] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19)
- [ 0.649875] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
- [ 0.651106] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.652396] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.654079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- [ 0.665402] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
- [ 0.665567] ata3: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
- [ 0.671260] ata3.00: configured for MWDMA2
- [ 0.674032] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
- [ 0.674206] sdhci-pci 0000:07:05.2: SDHCI controller found [1180:0843] (rev 1)
- [ 0.674505] sdhci-pci 0000:07:05.2: setting latency timer to 64
- [ 0.696158] mmc1: SDHCI controller on PCI [0000:07:05.2] using DMA
- [ 0.697652] usbcore: registered new interface driver usbhid
- [ 0.697810] usbhid: USB HID core driver
- [ 0.698699] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
- [ 0.698876] hda_intel: Disabling MSI
- [ 0.699102] snd_hda_intel 0000:00:10.1: setting latency timer to 64
- [ 0.708111] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.758388] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.758668] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.765302] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.822318] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.833040] hda_codec: CX20549 (Venice): BIOS auto-probing.
- [ 0.879316] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 0.882173] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6
- [ 0.960085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 0.963397] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV010A, max UDMA/100
- [ 0.963556] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 0.966357] ata1.00: configured for UDMA/100
- [ 0.966686] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1652GS LV01 PQ: 0 ANSI: 5
- [ 0.967369] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 0.967693] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.967710] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.967713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.967732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.977350] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input7
- [ 0.981342] usbcore: registered new interface driver snd-usb-audio
- [ 0.981566] usbcore: registered new interface driver snd-usb-caiaq
- [ 0.987453] Netfilter messages via NETLINK v0.30.
- [ 0.987625] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 0.988108] ctnetlink v0.93: registering with nfnetlink.
- [ 0.988407] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 0.988645] TCP: cubic registered
- [ 0.988794] NET: Registered protocol family 17
- [ 0.990121] powernow-k8: fid 0x8 (1600 MHz), vid 0x12
- [ 0.990281] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
- [ 0.990471] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 (2 cpu cores) (version 2.20.00)
- [ 0.990819] ALSA device list:
- [ 0.990967] #0: HDA NVidia at 0xb0000000 irq 21
- [ 0.995205] sda: sda1 sda2 sda3
- [ 0.996112] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.060203] firewire_core 0000:07:05.0: created device fw0: GUID 009fc00020a0cb00, S400
- [ 1.271045] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.275135] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
- [ 1.280631] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.280895] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.281314] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 1.281559] sr 2:0:0:0: Attached scsi generic sg1 type 5
- [ 1.281906] ata4: port disabled--ignoring
- [ 1.591444] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 258943
- [ 1.655875] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
- [ 1.711780] kjournald starting. Commit interval 5 seconds
- [ 1.711877] EXT3-fs (sda3): mounted filesystem with writeback data mode
- [ 1.711891] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
- [ 1.741900] devtmpfs: mounted
- [ 1.743185] Freeing unused kernel memory: 528k freed
- [ 2.846596] cat (1201) used greatest stack depth: 5192 bytes left
- [ 2.932963] gzip (1203) used greatest stack depth: 4232 bytes left
- [ 3.018206] init-early.sh (1200) used greatest stack depth: 3992 bytes left
- [ 5.762300] systemd-udevd[1296]: starting version 204
- [ 7.124533] i2c i2c-0: nForce2 SMBus adapter at 0x3040
- [ 7.124609] i2c i2c-1: nForce2 SMBus adapter at 0x3000
- [ 7.139623] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 7.139853] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
- [ 7.139879] forcedeth 0000:00:14.0: setting latency timer to 64
- [ 7.461341] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
- [ 7.469067] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
- [ 7.469075] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
- [ 7.469082] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
- [ 7.469088] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
- [ 7.469094] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
- [ 7.492110] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
- [ 7.524225] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
- [ 7.539033] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
- [ 7.546110] Broadcom 43xx driver loaded [ Features: P ]
- [ 7.601415] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 7.661789] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:16:36:b0:2a:1f
- [ 7.661796] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
- [ 7.661841] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 8.722231] nvidia: module license 'NVIDIA' taints kernel.
- [ 8.722238] Disabling lock debugging due to kernel taint
- [ 8.754733] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
- [ 8.754768] nvidia 0000:00:05.0: setting latency timer to 64
- [ 8.754774] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 8.755087] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
- [ 11.470864] EXT3-fs (sda3): using internal journal
- [ 11.886565] Adding 1919760k swap on /dev/sda2. Priority:-1 extents:1 across:1919760k
- [ 18.315051] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
- [ 130.051022] CE: hpet increased min_delta_ns to 11520 nsec
- [ 152.013653] wlan0: authenticate with 00:1c:10:5b:bd:8d
- [ 152.030489] wlan0: send auth to 00:1c:10:5b:bd:8d (try 1/3)
- [ 152.032871] wlan0: authenticated
- [ 152.033059] wlan0: associate with 00:1c:10:5b:bd:8d (try 1/3)
- [ 152.046238] wlan0: RX AssocResp from 00:1c:10:5b:bd:8d (capab=0x411 status=0 aid=2)
- [ 152.049275] wlan0: associated
- [ 302.065303] kworker/u:0 (6) used greatest stack depth: 3832 bytes left
- [ 7778.618304] ata1: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1
- [ 7778.618311] ata1: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0
- dhfis 0x1 dmafis 0x1 sdbfis 0x0
- [ 7778.618316] ata1: ATA_REG 0x41 ERR_REG 0x40
- [ 7778.618319] ata1: tag : dhfis dmafis sdbfis sactive
- [ 7778.618322] ata1: tag 0x0: 1 1 0 1
- [ 7778.618333] ata1.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
- [ 7778.618336] ata1.00: Ata error. fis:0x21
- [ 7778.618346] ata1.00: cmd 60/08:00:14:86:32/00:00:0b:00:00/40 tag 0 ncq 4096 in
- res 41/40:00:14:86:32/40:00:0b:00:00/40 Emask 0x9 (media error)
- [ 7778.618354] ata1: hard resetting link
- [ 7778.618356] ata1: nv: skipping hardreset on occupied port
- [ 7779.072073] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 7779.079358] ata1.00: configured for UDMA/100
- [ 7779.079380] sd 0:0:0:0: [sda] Unhandled sense code
- [ 7779.079383] sd 0:0:0:0: [sda]
- [ 7779.079386] Result: hostbyte=0x00 driverbyte=0x08
- [ 7779.079388] sd 0:0:0:0: [sda]
- [ 7779.079391] Sense Key : 0x3 [current] [descriptor]
- [ 7779.079394] Descriptor sense data with sense descriptors (in hex):
- [ 7779.079396] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
- [ 7779.079407] 0b 32 86 14
- [ 7779.079412] sd 0:0:0:0: [sda]
- [ 7779.079414] ASC=0x11 ASCQ=0x4
- [ 7779.079417] sd 0:0:0:0: [sda] CDB:
- [ 7779.079419] cdb[0]=0x28: 28 00 0b 32 86 14 00 00 08 00
- [ 7779.079428] end_request: I/O error, dev sda, sector 187860500
- [ 7779.079459] ata1: EH complete
- [ 7783.141123] ata1: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1
- [ 7783.141130] ata1: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0
- dhfis 0x1 dmafis 0x1 sdbfis 0x0
- [ 7783.141135] ata1: ATA_REG 0x41 ERR_REG 0x40
- [ 7783.141137] ata1: tag : dhfis dmafis sdbfis sactive
- [ 7783.141141] ata1: tag 0x0: 1 1 0 1
- [ 7783.141151] ata1.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
- [ 7783.141154] ata1.00: Ata error. fis:0x21
- [ 7783.141164] ata1.00: cmd 60/08:00:14:86:32/00:00:0b:00:00/40 tag 0 ncq 4096 in
- res 41/40:00:14:86:32/40:00:0b:00:00/40 Emask 0x9 (media error)
- [ 7783.141172] ata1: hard resetting link
- [ 7783.141174] ata1: nv: skipping hardreset on occupied port
- [ 7783.595056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 7783.601343] ata1.00: configured for UDMA/100
- [ 7783.601364] sd 0:0:0:0: [sda] Unhandled sense code
- [ 7783.601368] sd 0:0:0:0: [sda]
- [ 7783.601370] Result: hostbyte=0x00 driverbyte=0x08
- [ 7783.601373] sd 0:0:0:0: [sda]
- [ 7783.601375] Sense Key : 0x3 [current] [descriptor]
- [ 7783.601379] Descriptor sense data with sense descriptors (in hex):
- [ 7783.601381] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
- [ 7783.601391] 0b 32 86 14
- [ 7783.601396] sd 0:0:0:0: [sda]
- [ 7783.601398] ASC=0x11 ASCQ=0x4
- [ 7783.601401] sd 0:0:0:0: [sda] CDB:
- [ 7783.601403] cdb[0]=0x28: 28 00 0b 32 86 14 00 00 08 00
- [ 7783.601412] end_request: I/O error, dev sda, sector 187860500
- [ 7783.603186] ata1: EH complete
- papapenguin ~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement