Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Booting Linux on physical CPU 0x500
- Linux version 3.18.0-next-20141210+ (test@Inspiron-620) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.134
- CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Firefly-RK3288
- bootconsole [earlycon0] enabled
- Memory policy: Data cache writealloc
- PERCPU: Embedded 9 pages/cpu @ee7b4000 s7744 r8192 d20928 u36864
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
- Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 2071820K/2097152K available (4295K kernel code, 222K rwdata, 1376K rodata, 240K init, 290K bss, 25332K reserved, 0K cma-res)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0591f94 (5672 kB)
- .init : 0xc0592000 - 0xc05ce000 ( 240 kB)
- .data : 0xc05ce000 - 0xc06059a8 ( 223 kB)
- .bss : 0xc06059a8 - 0xc064e1e4 ( 291 kB)
- Hierarchical RCU implementation.
- Additional per-CPU info printed with stalls.
- NR_IRQS:16 nr_irqs:16 16
- L2C: failed to init: -19
- Architected cp15 timer(s) running at 24.00MHz (phys).
- sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- Switching to timer-based delay loop, resolution 41ns
- Console: colour dummy device 80x30
- Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
- Setting up static identity map for 0x437d08 - 0x437d60
- CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
- CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
- CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
- Brought up 4 CPUs
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- reg-fixed-voltage sdmmc-regulator: Failed to find supply vin
- reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
- platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral
- reg-fixed-voltage flash-regulator: Failed to find supply vin
- reg-fixed-voltage flash-regulator: Failed to register regulator: -517
- platform flash-regulator: Driver reg-fixed-voltage requests probe deferral
- vcc_5v: supplied by vcc_sys
- vcc_host_5v: supplied by vcc_5v
- vcc_otg_5v: supplied by vcc_5v
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- cfg80211: Calling CRDA to update world regulatory domain
- Switched to clocksource arch_sys_counter
- NET: Registered protocol family 2
- TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP: reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 1392K (c4bf0000 - c4d4c000)
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- bounce: pool size: 64 pages
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- io scheduler noop registered
- io scheduler deadline registered (default)
- dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
- dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
- dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- dw-apb-uart ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 32, base_baud = 1500000) is a 16550A
- dw-apb-uart ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 33, base_baud = 1500000) is a 16550A
- console [ttyS2] disabled
- dw-apb-uart ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 34, base_baud = 1500000) is a 16550A
- console [ttyS2] enabled
- console [ttyS2] enabled
- bootconsole [earlycon0] disabled
- bootconsole [earlycon0] disabled
- dw-apb-uart ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 35, base_baud = 1500000) is a 16550A
- [drm] Initialized drm 1.1.0 20060810
- brd: module loaded
- dwc2 ff540000.usb: DWC OTG Controller
- dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
- dwc2 ff540000.usb: irq 37, io mem 0x00000000
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: DWC OTG Controller
- usb usb1: Manufacturer: Linux 3.18.0-next-20141210+ dwc2_hsotg
- usb usb1: SerialNumber: ff540000.usb
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- usb 1-1: new high-speed USB device number 2 using dwc2
- usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
- usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 1-1: Product: USB 2.0 Hub [MTT]
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- dwc2 ff580000.usb: DWC OTG Controller
- dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
- dwc2 ff580000.usb: irq 38, io mem 0x00000000
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: DWC OTG Controller
- usb usb2: Manufacturer: Linux 3.18.0-next-20141210+ dwc2_hsotg
- usb usb2: SerialNumber: ff580000.usb
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- usbcore: registered new interface driver usb-storage
- mousedev: PS/2 mouse device common for all mice
- rk3x-i2c ff140000.i2c: using default SCL frequency: 100000
- rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at f00a6000
- rk3x-i2c ff160000.i2c: using default SCL frequency: 100000
- rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at f00a8000
- rk3x-i2c ff170000.i2c: using default SCL frequency: 100000
- rk3x-i2c ff170000.i2c: Initialized RK3xxx I2C bus at f00aa000
- fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- vdd_cpu: supplied by vcc_sys
- fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
- vdd_gpu: supplied by vcc_sys
- rtc-hym8563 0-0051: no valid clock/calendar values available
- rtc (null): read_time: fail to read
- rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0
- rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at f00ac000
- rk3x-i2c ff660000.i2c: using default SCL frequency: 100000
- rk3x-i2c ff660000.i2c: Initialized RK3xxx I2C bus at f00ae000
- lirc_dev: IR Remote Control driver registered, major 247
- IR NEC protocol handler initialized
- IR RC5(x/sz) protocol handler initialized
- IR RC6 protocol handler initialized
- IR JVC protocol handler initialized
- IR Sony protocol handler initialized
- IR SANYO protocol handler initialized
- IR Sharp protocol handler initialized
- IR MCE Keyboard/mouse protocol handler initialized
- IR LIRC bridge handler initialized
- IR XMP protocol handler initialized
- Registered IR keymap rc-empty
- input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input0
- rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
- input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
- rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
- rockchip-thermal ff280000.tsadc: Missing tshut mode property, using default (gpio)
- rockchip-thermal ff280000.tsadc: Missing tshut-polarity property, using default (low)
- thermal thermal_zone1: failed to read out thermal zone 1
- thermal thermal_zone2: failed to read out thermal zone 2
- softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- Driver 'mmcblk' needs updating - please use bus_type methods
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- Synopsys Designware Multimedia Card Interface Driver
- dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
- dwmmc_rockchip ff0c0000.dwmmc: Using PIO mode.
- dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
- dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 24, 32 bit host data width, 256 deep fifo
- platform ff0c0000.dwmmc: Driver dwmmc_rockchip requests probe deferral
- dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
- dwmmc_rockchip ff0d0000.dwmmc: Using PIO mode.
- dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
- dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 25, 32 bit host data width, 256 deep fifo
- dwmmc_rockchip ff0d0000.dwmmc: No vqmmc regulator found
- mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized
- sdhci-pltfm: SDHCI platform and OF driver helper
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- usbcore: registered new interface driver r8188eu
- usbcore: registered new interface driver rtl8723au
- TCP: cubic registered
- NET: Registered protocol family 17
- Registering SWP/SWPB emulation handler
- vcc_sd: supplied by vcc_io
- vcc_flash: supplied by vcc_io
- dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
- dwmmc_rockchip ff0c0000.dwmmc: Using PIO mode.
- dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
- dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 24, 32 bit host data width, 256 deep fifo
- dwmmc_rockchip ff0c0000.dwmmc: No vqmmc regulator found
- mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized
- input: gpio-keys as /devices/platform/gpio-keys/input/input2
- rtc-hym8563 0-0051: no valid clock/calendar values available
- rtc rtc0: read_time: fail to read
- rtc-hym8563 0-0051: hctosys: unable to read the hardware clock
- vcc_flash: disabling
- vdd_gpu: disabling
- of_dma_request_slave_channel: dma-names property of node '/serial@ff690000' missing or empty
- ttyS2 - failed to request DMA
- Freeing unused kernel memory: 240K (c0592000 - c05ce000)
- mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- mmc1: new high speed SDHC card at address b368
- mmcblk0: mmc1:b368 USD 7.45 GiB
- mmcblk0: error -110 sending status command, retrying
- mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0
- insmod: can't insert '/lib/modules/rk30xxnand_ko.ko.3.10.0': invrk30xxnand_ko: version magic '3.10.0 SMP preempt mod_unload ARMv7 p'
- mmcblk0: retrying using single block read
- alid module format
- mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
- blk_update_request: I/O error, dev mmcblk0, sector 1
- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
- mmcblk0: error -110 sending status command, retrying
- mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0
- blk_update_request: I/O error, dev mmcblk0, sector 2
- Buffer I/O error on dev mmcblk0, logical block 0, async page read
- CPU: 1 PID: 1 Comm: init Not tainted 3.18.0-next-20141210+ #7
- Hardware name: Rockchip Cortex-A9 (Device Tree)
- Backtrace:
- [<c0011d3c>] (dump_backtrace) from [<c0011f5c>] (show_stack+0x18/0x1c)
- r7:ee05ff58 r6:ee05db40 r5:c0605eb0 r4:00000000
- [<c0011f44>] (show_stack) from [<c0433208>] (dump_stack+0x78/0x94)
- [<c0433190>] (dump_stack) from [<c043200c>] (panic+0x90/0x1e8)
- r5:c0605eb0 r4:ee05db40
- [<c0431f80>] (panic) from [<c00229d0>] (do_exit+0x478/0x88c)
- r3:ee041dc0 r2:ee041dcc r1:00000000 r0:c050596a
- r7:ee05ff58
- [<c0022558>] (do_exit) from [<c0023d3c>] (do_group_exit+0x54/0xd8)
- r7:000000f8
- [<c0023ce8>] (do_group_exit) from [<c0023dd8>] (__wake_up_parent+0x0/0x28)
- r7:000000f8 r6:011e6008 r5:00070aba r4:00070aa6
- [<c0023dc0>] (SyS_exit_group) from [<c000ea00>] (ret_fast_syscall+0x0/0x30)
- CPU2: stopping
- CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.18.0-next-20141210+ #7
- Hardware name: Rockchip Cortex-A9 (Device Tree)
- Backtrace:
- [<c0011d3c>] (dump_backtrace) from [<c0011f5c>] (show_stack+0x18/0x1c)
- r7:ee07ffa4 r6:00000000 r5:00000002 r4:00000000
- [<c0011f44>] (show_stack) from [<c0433208>] (dump_stack+0x78/0x94)
- [<c0433190>] (dump_stack) from [<c0013ed0>] (handle_IPI+0xd0/0x168)
- r5:00000002 r4:c0605c98
- [<c0013e00>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64)
- r7:ee07ffa4 r6:ee07ff70 r5:c05d717c r4:f0002000
- [<c0008610>] (gic_handle_irq) from [<c0012a00>] (__irq_svc+0x40/0x54)
- Exception stack(0xee07ff70 to 0xee07ffb8)
- ff60: ffffffed 00000000 00000000 c001d3a0
- ff80: 00000000 00000000 c05ccb48 c0605cc4 00000000 ffffffed 00000000 ee07ffc4
- ffa0: ee07ffc8 ee07ffb8 c000f5f0 c000f5f4 600f0113 ffffffff
- r7:ee07ffa4 r6:ffffffff r5:600f0113 r4:c000f5f4
- [<c000f5c0>] (arch_cpu_idle) from [<c004c2e4>] (cpu_startup_entry+0xe0/0x23c)
- [<c004c204>] (cpu_startup_entry) from [<c0013bcc>] (secondary_start_kernel+0x124/0x148)
- r7:c0605cc4 r4:00000002
- [<c0013aa8>] (secondary_start_kernel) from [<00008704>] (0x8704)
- r5:00000015 r4:2e06406a
- CPU3: stopping
- CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.0-next-20141210+ #7
- Hardware name: Rockchip Cortex-A9 (Device Tree)
- Backtrace:
- [<c0011d3c>] (dump_backtrace) from [<c0011f5c>] (show_stack+0x18/0x1c)
- r7:ee081fa4 r6:00000000 r5:00000003 r4:00000000
- [<c0011f44>] (show_stack) from [<c0433208>] (dump_stack+0x78/0x94)
- [<c0433190>] (dump_stack) from [<c0013ed0>] (handle_IPI+0xd0/0x168)
- r5:00000003 r4:c0605c98
- [<c0013e00>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64)
- r7:ee081fa4 r6:ee081f70 r5:c05d717c r4:f0002000
- [<c0008610>] (gic_handle_irq) from [<c0012a00>] (__irq_svc+0x40/0x54)
- Exception stack(0xee081f70 to 0xee081fb8)
- 1f60: ffffffed 00000000 00000000 c001d3a0
- 1f80: 00000000 00000000 c05ccb48 c0605cc4 00000000 ffffffed 00000000 ee081fc4
- 1fa0: ee081fc8 ee081fb8 c000f5f0 c000f5f4 600f0013 ffffffff
- r7:ee081fa4 r6:ffffffff r5:600f0013 r4:c000f5f4
- [<c000f5c0>] (arch_cpu_idle) from [<c004c2e4>] (cpu_startup_entry+0xe0/0x23c)
- [<c004c204>] (cpu_startup_entry) from [<c0013bcc>] (secondary_start_kernel+0x124/0x148)
- r7:c0605cc4 r4:00000003
- [<c0013aa8>] (secondary_start_kernel) from [<00008704>] (0x8704)
- r5:00000015 r4:2e06406a
- CPU0: stopping
- CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-next-20141210+ #7
- Hardware name: Rockchip Cortex-A9 (Device Tree)
- Backtrace:
- [<c0011d3c>] (dump_backtrace) from [<c0011f5c>] (show_stack+0x18/0x1c)
- r7:c05cff6c r6:00000000 r5:00000000 r4:00000000
- [<c0011f44>] (show_stack) from [<c0433208>] (dump_stack+0x78/0x94)
- [<c0433190>] (dump_stack) from [<c0013ed0>] (handle_IPI+0xd0/0x168)
- r5:00000000 r4:c0605c98
- [<c0013e00>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64)
- r7:c05cff6c r6:c05cff38 r5:c05d717c r4:f0002000
- [<c0008610>] (gic_handle_irq) from [<c0012a00>] (__irq_svc+0x40/0x54)
- Exception stack(0xc05cff38 to 0xc05cff80)
- ff20: ffffffed 00000000
- ff40: 00000000 c001d3a0 00000000 00000000 c05ccb48 c05d6400 00000000 ffffffed
- ff60: 00000000 c05cff8c c05cff90 c05cff80 c000f5f0 c000f5f4 600f0013 ffffffff
- r7:c05cff6c r6:ffffffff r5:600f0013 r4:c000f5f4
- [<c000f5c0>] (arch_cpu_idle) from [<c004c2e4>] (cpu_startup_entry+0xe0/0x23c)
- [<c004c204>] (cpu_startup_entry) from [<c0431320>] (rest_init+0x68/0x80)
- r7:c05d6400 r4:c05d6de0
- [<c04312b8>] (rest_init) from [<c0592c80>] (start_kernel+0x330/0x39c)
- [<c0592950>] (start_kernel) from [<00008074>] (0x8074)
- ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement