API tools faq
paste
Advertisement
Guest User

da9

a guest
Jun 24th, 2015
96
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.66 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p16 amd64] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Green
  6. Device Model: WDC WD20EARX-00PASB0
  7. Serial Number: WD-WMAZA5789096
  8. LU WWN Device Id: 5 0014ee 058281838
  9. Firmware Version: 51.0AB51
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ATA8-ACS (minor revision not indicated)
  14. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  15. Local Time is: Tue Jun 23 21:39:04 2015 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18. AAM feature is: Unavailable
  19. APM feature is: Unavailable
  20. Rd look-ahead is: Enabled
  21. Write cache is: Enabled
  22. ATA Security is: Disabled, NOT FROZEN [SEC1]
  23. Wt Cache Reorder: Unknown
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART Status not supported: Incomplete response, ATA output registers missing
  27. SMART overall-health self-assessment test result: PASSED
  28. Warning: This result is based on an Attribute check.
  29.  
  30. General SMART Values:
  31. Offline data collection status: (0x82) Offline data collection activity
  32. was completed without error.
  33. Auto Offline Data Collection: Enabled.
  34. Self-test execution status: ( 113) The previous self-test completed having
  35. the read element of the test failed.
  36. Total time to complete Offline
  37. data collection: (37680) seconds.
  38. Offline data collection
  39. capabilities: (0x7b) SMART execute Offline immediate.
  40. Auto Offline data collection on/off support.
  41. Suspend Offline collection upon new
  42. command.
  43. Offline surface scan supported.
  44. Self-test supported.
  45. Conveyance Self-test supported.
  46. Selective Self-test supported.
  47. SMART capabilities: (0x0003) Saves SMART data before entering
  48. power-saving mode.
  49. Supports SMART auto save timer.
  50. Error logging capability: (0x01) Error logging supported.
  51. General Purpose Logging supported.
  52. Short self-test routine
  53. recommended polling time: ( 2) minutes.
  54. Extended self-test routine
  55. recommended polling time: ( 363) minutes.
  56. Conveyance self-test routine
  57. recommended polling time: ( 5) minutes.
  58. SCT capabilities: (0x3035) SCT Status supported.
  59. SCT Feature Control supported.
  60. SCT Data Table supported.
  61.  
  62. SMART Attributes Data Structure revision number: 16
  63. Vendor Specific SMART Attributes with Thresholds:
  64. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  65. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 76
  66. 3 Spin_Up_Time POS--K 166 165 021 - 6683
  67. 4 Start_Stop_Count -O--CK 100 100 000 - 82
  68. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  69. 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
  70. 9 Power_On_Hours -O--CK 062 062 000 - 28285
  71. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  72. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  73. 12 Power_Cycle_Count -O--CK 100 100 000 - 80
  74. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 26
  75. 193 Load_Cycle_Count -O--CK 141 141 000 - 177021
  76. 194 Temperature_Celsius -O---K 122 117 000 - 28
  77. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  78. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  79. 198 Offline_Uncorrectable ----CK 200 200 000 - 8
  80. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  81. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  82. ||||||_ K auto-keep
  83. |||||__ C event count
  84. ||||___ R error rate
  85. |||____ S speed/performance
  86. ||_____ O updated online
  87. |______ P prefailure warning
  88.  
  89. General Purpose Log Directory Version 1
  90. SMART Log Directory Version 1 [multi-sector log support]
  91. Address Access R/W Size Description
  92. 0x00 GPL,SL R/O 1 Log Directory
  93. 0x01 SL R/O 1 Summary SMART error log
  94. 0x02 SL R/O 5 Comprehensive SMART error log
  95. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  96. 0x06 SL R/O 1 SMART self-test log
  97. 0x07 GPL R/O 1 Extended self-test log
  98. 0x09 SL R/W 1 Selective self-test log
  99. 0x10 GPL R/O 1 NCQ Command Error log
  100. 0x11 GPL R/O 1 SATA Phy Event Counters
  101. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  102. 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
  103. 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
  104. 0xc0 GPL,SL VS 1 Device vendor specific log
  105. 0xc1 GPL VS 93 Device vendor specific log
  106. 0xe0 GPL,SL R/W 1 SCT Command/Status
  107. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  108.  
  109. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  110. Device Error Count: 12
  111. CR = Command Register
  112. FEATR = Features Register
  113. COUNT = Count (was: Sector Count) Register
  114. LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
  115. LH = LBA High (was: Cylinder High) Register ] LBA
  116. LM = LBA Mid (was: Cylinder Low) Register ] Register
  117. LL = LBA Low (was: Sector Number) Register ]
  118. DV = Device (was: Device/Head) Register
  119. DC = Device Control Register
  120. ER = Error register
  121. ST = Status register
  122. Powered_Up_Time is measured from power on, and printed as
  123. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  124. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  125.  
  126. Error 12 [11] occurred at disk power-on lifetime: 28164 hours (1173 days + 12 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER -- ST COUNT LBA_48 LH LM LL DV DC
  131. -- -- -- == -- == == == -- -- -- -- --
  132. 40 -- 51 00 08 00 00 d5 82 ff 88 e0 00 Error: UNC 8 sectors at LBA = 0xd582ff88 = 3582132104
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  136. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  137. 25 00 00 00 08 00 00 d5 82 ff 87 e0 00 1d+03:00:06.464 READ DMA EXT
  138. 25 00 00 00 08 00 00 d5 82 ff 7f e0 00 1d+03:00:06.464 READ DMA EXT
  139. 25 00 00 00 08 00 00 d5 82 ff 77 e0 00 1d+03:00:06.464 READ DMA EXT
  140. 25 00 00 00 08 00 00 d5 82 ff 6f e0 00 1d+03:00:06.463 READ DMA EXT
  141. 25 00 00 00 08 00 00 d5 82 ff 67 e0 00 1d+03:00:06.463 READ DMA EXT
  142.  
  143. Error 11 [10] occurred at disk power-on lifetime: 28164 hours (1173 days + 12 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER -- ST COUNT LBA_48 LH LM LL DV DC
  148. -- -- -- == -- == == == -- -- -- -- --
  149. 40 -- 51 01 00 00 00 d5 82 ff 88 e0 00 Error: UNC 256 sectors at LBA = 0xd582ff88 = 3582132104
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  153. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  154. 25 00 00 01 00 00 00 d5 82 fe c7 e0 00 1d+03:00:03.485 READ DMA EXT
  155. 25 00 00 01 00 00 00 d5 82 fd c7 e0 00 1d+03:00:03.482 READ DMA EXT
  156. 25 00 00 01 00 00 00 d5 82 fc c7 e0 00 1d+03:00:03.480 READ DMA EXT
  157. 25 00 00 00 c0 00 00 d5 82 fc 07 e0 00 1d+03:00:03.478 READ DMA EXT
  158. ea 00 00 00 00 00 00 d5 82 fc 06 e0 00 1d+03:00:03.455 FLUSH CACHE EXT
  159.  
  160. Error 10 [9] occurred at disk power-on lifetime: 28164 hours (1173 days + 12 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER -- ST COUNT LBA_48 LH LM LL DV DC
  165. -- -- -- == -- == == == -- -- -- -- --
  166. 40 -- 51 01 00 00 00 d5 83 18 28 e0 00 Error: UNC 256 sectors at LBA = 0xd5831828 = 3582138408
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  170. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  171. 25 00 00 01 00 00 00 d5 83 18 17 e0 00 1d+02:59:51.256 READ DMA EXT
  172. 25 00 00 01 00 00 00 d5 83 17 17 e0 00 1d+02:59:51.253 READ DMA EXT
  173. 25 00 00 01 00 00 00 d5 83 16 17 e0 00 1d+02:59:51.251 READ DMA EXT
  174. 25 00 00 00 80 00 00 d5 83 15 97 e0 00 1d+02:59:51.250 READ DMA EXT
  175. 25 00 00 00 40 00 00 d5 83 15 57 e0 00 1d+02:59:51.250 READ DMA EXT
  176.  
  177. Error 9 [8] occurred at disk power-on lifetime: 28142 hours (1172 days + 14 hours)
  178. When the command that caused the error occurred, the device was active or idle.
  179.  
  180. After command completion occurred, registers were:
  181. ER -- ST COUNT LBA_48 LH LM LL DV DC
  182. -- -- -- == -- == == == -- -- -- -- --
  183. 40 -- 51 00 08 00 00 03 b3 4a 70 e3 00 Error: UNC 8 sectors at LBA = 0x03b34a70 = 62081648
  184.  
  185. Commands leading to the command that caused the error were:
  186. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  187. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  188. c8 00 00 00 08 00 00 03 b3 4a 6f e3 00 03:56:28.654 READ DMA
  189. 27 00 00 00 00 00 00 00 00 00 00 e0 00 03:56:28.654 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  190. ec 00 00 00 00 00 00 00 00 00 00 a0 02 03:56:28.646 IDENTIFY DEVICE
  191. ef 00 03 00 45 00 00 00 00 00 00 a0 02 03:56:28.639 SET FEATURES [Set transfer mode]
  192. 27 00 00 00 00 00 00 00 00 00 00 e0 00 03:56:28.639 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  193.  
  194. Error 8 [7] occurred at disk power-on lifetime: 28142 hours (1172 days + 14 hours)
  195. When the command that caused the error occurred, the device was active or idle.
  196.  
  197. After command completion occurred, registers were:
  198. ER -- ST COUNT LBA_48 LH LM LL DV DC
  199. -- -- -- == -- == == == -- -- -- -- --
  200. 40 -- 51 00 08 00 00 03 b3 4a 70 e3 00 Error: UNC 8 sectors at LBA = 0x03b34a70 = 62081648
  201.  
  202. Commands leading to the command that caused the error were:
  203. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  204. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  205. c8 00 00 00 08 00 00 03 b3 4a 6f e3 00 03:56:25.957 READ DMA
  206. ea 00 00 00 00 00 00 74 46 30 fe e0 00 03:56:25.933 FLUSH CACHE EXT
  207. 35 00 00 00 08 00 00 74 46 30 f7 e0 00 03:56:25.933 WRITE DMA EXT
  208. ea 00 00 00 00 00 00 03 b3 4a 6e e0 00 03:56:25.899 FLUSH CACHE EXT
  209. c8 00 00 00 08 00 00 03 b3 4a 67 e3 00 03:56:25.899 READ DMA
  210.  
  211. Error 7 [6] occurred at disk power-on lifetime: 28142 hours (1172 days + 14 hours)
  212. When the command that caused the error occurred, the device was active or idle.
  213.  
  214. After command completion occurred, registers were:
  215. ER -- ST COUNT LBA_48 LH LM LL DV DC
  216. -- -- -- == -- == == == -- -- -- -- --
  217. 40 -- 51 00 40 00 00 03 b3 4a 70 e3 00 Error: UNC 64 sectors at LBA = 0x03b34a70 = 62081648
  218.  
  219. Commands leading to the command that caused the error were:
  220. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  221. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  222. c8 00 00 00 40 00 00 03 b3 4a 67 e3 00 03:56:23.175 READ DMA
  223. c8 00 00 00 20 00 00 03 b3 4a 47 e3 00 03:56:23.169 READ DMA
  224. c8 00 00 00 08 00 00 03 81 01 ef e3 00 03:56:23.165 READ DMA
  225. c8 00 00 00 08 00 00 03 81 01 e7 e3 00 03:56:23.165 READ DMA
  226. c8 00 00 00 08 00 00 03 81 01 f7 e3 00 03:56:23.164 READ DMA
  227.  
  228. Error 6 [5] occurred at disk power-on lifetime: 25444 hours (1060 days + 4 hours)
  229. When the command that caused the error occurred, the device was active or idle.
  230.  
  231. After command completion occurred, registers were:
  232. ER -- ST COUNT LBA_48 LH LM LL DV DC
  233. -- -- -- == -- == == == -- -- -- -- --
  234. 40 -- 51 00 08 00 00 03 b3 3f 40 e3 00 Error: UNC 8 sectors at LBA = 0x03b33f40 = 62078784
  235.  
  236. Commands leading to the command that caused the error were:
  237. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  238. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  239. c8 00 00 00 08 00 00 03 b3 3f 3f e3 00 32d+21:38:42.358 READ DMA
  240. 27 00 00 00 00 00 00 00 00 00 00 e0 00 32d+21:38:42.358 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  241. ec 00 00 00 00 00 00 00 00 00 00 a0 02 32d+21:38:42.351 IDENTIFY DEVICE
  242. ef 00 03 00 45 00 00 00 00 00 00 a0 02 32d+21:38:42.351 SET FEATURES [Set transfer mode]
  243. 27 00 00 00 00 00 00 00 00 00 00 e0 00 32d+21:38:42.351 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  244.  
  245. Error 5 [4] occurred at disk power-on lifetime: 25444 hours (1060 days + 4 hours)
  246. When the command that caused the error occurred, the device was active or idle.
  247.  
  248. After command completion occurred, registers were:
  249. ER -- ST COUNT LBA_48 LH LM LL DV DC
  250. -- -- -- == -- == == == -- -- -- -- --
  251. 40 -- 51 00 08 00 00 03 b3 3f 40 e3 00 Error: UNC 8 sectors at LBA = 0x03b33f40 = 62078784
  252.  
  253. Commands leading to the command that caused the error were:
  254. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  255. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  256. c8 00 00 00 08 00 00 03 b3 3f 3f e3 00 32d+21:38:39.660 READ DMA
  257. c8 00 00 00 08 00 00 03 b3 3f 37 e3 00 32d+21:38:39.660 READ DMA
  258. c8 00 00 00 08 00 00 03 b3 3f 2f e3 00 32d+21:38:39.660 READ DMA
  259. c8 00 00 00 08 00 00 03 b3 3f 27 e3 00 32d+21:38:39.660 READ DMA
  260. c8 00 00 00 08 00 00 03 b3 3f 1f e3 00 32d+21:38:39.659 READ DMA
  261.  
  262. SMART Extended Self-test Log Version: 1 (1 sectors)
  263. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  264. # 1 Short offline Completed: read failure 10% 28281 62081649
  265. # 2 Short offline Completed: read failure 10% 28275 62081649
  266. # 3 Short offline Completed: read failure 10% 28269 62081649
  267. # 4 Short offline Completed: read failure 10% 28263 62081649
  268. # 5 Short offline Completed: read failure 10% 28257 62081649
  269. # 6 Short offline Completed: read failure 10% 28251 62081649
  270. # 7 Short offline Completed: read failure 10% 28245 62081649
  271. # 8 Short offline Completed: read failure 10% 28239 62081649
  272. # 9 Short offline Completed: read failure 10% 28233 62081649
  273. #10 Short offline Completed: read failure 10% 28227 62081649
  274. #11 Extended offline Completed: read failure 90% 28225 62078785
  275. #12 Conveyance offline Completed without error 00% 28222 -
  276.  
  277. SMART Selective self-test log data structure revision number 1
  278. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  279. 1 0 0 Not_testing
  280. 2 0 0 Not_testing
  281. 3 0 0 Not_testing
  282. 4 0 0 Not_testing
  283. 5 0 0 Not_testing
  284. Selective self-test flags (0x0):
  285. After scanning selected spans, do NOT read-scan remainder of disk.
  286. If Selective self-test is pending on power-up, resume after 0 minute delay.
  287.  
  288. SCT Status Version: 3
  289. SCT Version (vendor specific): 258 (0x0102)
  290. SCT Support Level: 1
  291. Device State: Active (0)
  292. Current Temperature: 28 Celsius
  293. Power Cycle Min/Max Temperature: 23/29 Celsius
  294. Lifetime Min/Max Temperature: 23/33 Celsius
  295. Under/Over Temperature Limit Count: 0/0
  296.  
  297. SCT Temperature History Version: 2
  298. Temperature Sampling Period: 1 minute
  299. Temperature Logging Interval: 1 minute
  300. Min/Max recommended Temperature: 0/60 Celsius
  301. Min/Max Temperature Limit: -41/85 Celsius
  302. Temperature History Size (Index): 478 (199)
  303.  
  304. Index Estimated Time Temperature Celsius
  305. 200 2015-06-23 13:42 27 ********
  306. 201 2015-06-23 13:43 28 *********
  307. 202 2015-06-23 13:44 27 ********
  308. ... ..( 26 skipped). .. ********
  309. 229 2015-06-23 14:11 27 ********
  310. 230 2015-06-23 14:12 28 *********
  311. 231 2015-06-23 14:13 27 ********
  312. ... ..(244 skipped). .. ********
  313. 476 2015-06-23 18:18 27 ********
  314. 477 2015-06-23 18:19 28 *********
  315. ... ..( 8 skipped). .. *********
  316. 8 2015-06-23 18:28 28 *********
  317. 9 2015-06-23 18:29 29 **********
  318. 10 2015-06-23 18:30 28 *********
  319. ... ..( 4 skipped). .. *********
  320. 15 2015-06-23 18:35 28 *********
  321. 16 2015-06-23 18:36 27 ********
  322. ... ..( 22 skipped). .. ********
  323. 39 2015-06-23 18:59 27 ********
  324. 40 2015-06-23 19:00 28 *********
  325. 41 2015-06-23 19:01 28 *********
  326. 42 2015-06-23 19:02 27 ********
  327. ... ..( 3 skipped). .. ********
  328. 46 2015-06-23 19:06 27 ********
  329. 47 2015-06-23 19:07 28 *********
  330. 48 2015-06-23 19:08 28 *********
  331. 49 2015-06-23 19:09 27 ********
  332. ... ..( 26 skipped). .. ********
  333. 76 2015-06-23 19:36 27 ********
  334. 77 2015-06-23 19:37 28 *********
  335. 78 2015-06-23 19:38 27 ********
  336. 79 2015-06-23 19:39 27 ********
  337. 80 2015-06-23 19:40 27 ********
  338. 81 2015-06-23 19:41 28 *********
  339. 82 2015-06-23 19:42 27 ********
  340. ... ..( 19 skipped). .. ********
  341. 102 2015-06-23 20:02 27 ********
  342. 103 2015-06-23 20:03 28 *********
  343. 104 2015-06-23 20:04 27 ********
  344. ... ..( 14 skipped). .. ********
  345. 119 2015-06-23 20:19 27 ********
  346. 120 2015-06-23 20:20 28 *********
  347. 121 2015-06-23 20:21 27 ********
  348. 122 2015-06-23 20:22 27 ********
  349. 123 2015-06-23 20:23 28 *********
  350. 124 2015-06-23 20:24 27 ********
  351. ... ..( 31 skipped). .. ********
  352. 156 2015-06-23 20:56 27 ********
  353. 157 2015-06-23 20:57 28 *********
  354. 158 2015-06-23 20:58 27 ********
  355. 159 2015-06-23 20:59 27 ********
  356. 160 2015-06-23 21:00 27 ********
  357. 161 2015-06-23 21:01 28 *********
  358. 162 2015-06-23 21:02 27 ********
  359. ... ..( 9 skipped). .. ********
  360. 172 2015-06-23 21:12 27 ********
  361. 173 2015-06-23 21:13 28 *********
  362. 174 2015-06-23 21:14 28 *********
  363. 175 2015-06-23 21:15 27 ********
  364. ... ..( 9 skipped). .. ********
  365. 185 2015-06-23 21:25 27 ********
  366. 186 2015-06-23 21:26 28 *********
  367. 187 2015-06-23 21:27 27 ********
  368. ... ..( 4 skipped). .. ********
  369. 192 2015-06-23 21:32 27 ********
  370. 193 2015-06-23 21:33 28 *********
  371. 194 2015-06-23 21:34 27 ********
  372. ... ..( 4 skipped). .. ********
  373. 199 2015-06-23 21:39 27 ********
  374.  
  375. SCT Error Recovery Control command not supported
  376.  
  377. Device Statistics (GP Log 0x04) not supported
  378.  
  379. SATA Phy Event Counters (GP Log 0x11)
  380. ID Size Value Description
  381. 0x0001 2 0 Command failed due to ICRC error
  382. 0x0002 2 0 R_ERR response for data FIS
  383. 0x0003 2 0 R_ERR response for device-to-host data FIS
  384. 0x0004 2 0 R_ERR response for host-to-device data FIS
  385. 0x0005 2 0 R_ERR response for non-data FIS
  386. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  387. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  388. 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
  389. 0x000b 2 0 CRC errors within host-to-device FIS
  390. 0x8000 4 227664 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!