Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version (Levex) 3.9.9+ (levex@levex-pc) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #99 SMP Sun Sep 22 08:52:20 CEST 2013
- [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
- [ 0.000000] Disabled fast string operations
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f5ecfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000003f5ed000-0x000000003f63efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000003f63f000-0x000000003f675fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000003f676000-0x000000003f6befff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003f6effff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000003f6f0000-0x000000003f6fefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000003f6ff000-0x000000003f6fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000003f700000-0x000000003fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
- [ 0.000000] SMBIOS 2.4 present.
- [ 0.000000] DMI: TOSHIBA TOSHIBA NB100/Portable PC, BIOS 1.10 09/15/2008
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x3f700 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0FFFE0000 mask 0FFFE0000 write-protect
- [ 0.000000] 1 base 0FFFC0000 mask 0FFFE0000 uncachable
- [ 0.000000] 2 base 000000000 mask 0E0000000 write-back
- [ 0.000000] 3 base 020000000 mask 0E0000000 write-back
- [ 0.000000] 4 base 03F800000 mask 0FF800000 uncachable
- [ 0.000000] 5 base 03F700000 mask 0FFF00000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 base 000000000 mask 0FFFE0000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
- [ 0.000000] [mem 0x35c00000-0x35ffffff] page 4k
- [ 0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x30000000-0x35bfffff]
- [ 0.000000] [mem 0x30000000-0x35bfffff] page 4k
- [ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE
- [ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE
- [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE
- [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
- [ 0.000000] [mem 0x00100000-0x2fffffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
- [ 0.000000] [mem 0x36000000-0x377fdfff] page 4k
- [ 0.000000] RAMDISK: [mem 0x36150000-0x3709ffff]
- [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 TOSINV)
- [ 0.000000] ACPI: XSDT 3f6fe120 00064 (v01 TOSINV TOSINV00 00000001 01000013)
- [ 0.000000] ACPI: FACP 3f6fc000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: DSDT 3f6f2000 055BB (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: FACS 3f608000 00040
- [ 0.000000] ACPI: SSDT 3f6fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] ACPI: HPET 3f6fb000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: APIC 3f6fa000 00068 (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: MCFG 3f6f9000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: ASF! 3f6f8000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: SLIC 3f6f1000 00180 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: BOOT 3f6f0000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 127MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
- [ 0.000000] HighMem [mem 0x377fe000-0x3f6fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x3f5ecfff]
- [ 0.000000] node 0: [mem 0x3f63f000-0x3f675fff]
- [ 0.000000] node 0: [mem 0x3f6bf000-0x3f6effff]
- [ 0.000000] node 0: [mem 0x3f6ff000-0x3f6fffff]
- [ 0.000000] On node 0 totalpages: 259572
- [ 0.000000] free_area_init_node: node 0, pgdat c197b840, node_mem_map f573f020
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 255 pages used for memmap
- [ 0.000000] HighMem zone: 32344 pages, LIFO batch:7
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77dd000 s31616 r0 d21632 u53248
- [ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257796
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/bzImage
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f700)
- [ 0.000000] Memory: 1001664k/1039360k available (7101k kernel code, 36624k reserved, 2657k data, 468k init, 129376k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc1988000 - 0xc19fd000 ( 468 kB)
- [ 0.000000] .data : 0xc16ef701 - 0xc1987ec0 (2657 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc16ef701 (7101 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
- [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
- [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 1596.146 MHz processor
- [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.29 BogoMIPS (lpj=1596146)
- [ 0.002009] pid_max: default: 32768 minimum: 301
- [ 0.002195] Security Framework initialized
- [ 0.002311] SELinux: Initializing.
- [ 0.002432] SELinux: Starting in permissive mode
- [ 0.002452] Mount-cache hash table entries: 512
- [ 0.003077] Initializing cgroup subsys cpuacct
- [ 0.003192] Initializing cgroup subsys freezer
- [ 0.003356] Atom PSE erratum detected, BIOS microcode update recommended
- [ 0.003478] Disabled fast string operations
- [ 0.003595] CPU: Physical Processor ID: 0
- [ 0.003708] CPU: Processor Core ID: 0
- [ 0.003826] mce: CPU supports 5 MCE banks
- [ 0.003950] CPU0: Thermal monitoring enabled (TM2)
- [ 0.004028] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
- [ 0.004028] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
- [ 0.004028] tlb_flushall_shift: 6
- [ 0.004427] Freeing SMP alternatives: 28k freed
- [ 0.004564] ACPI: Core revision 20130117
- [ 0.010669] ACPI: All ACPI Tables successfully acquired
- [ 0.011244] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.012240] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.011018] Development version, beware.
- [ 0.022424] smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
- [ 0.023000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
- [ 0.023000] ... version: 3
- [ 0.023000] ... bit width: 40
- [ 0.023000] ... generic registers: 2
- [ 0.023000] ... value mask: 000000ffffffffff
- [ 0.023000] ... max period: 000000007fffffff
- [ 0.023000] ... fixed-purpose events: 3
- [ 0.023006] ... event mask: 0000000700000003
- [ 0.023923] CPU 1 irqstacks, hard=f50c0000 soft=f50c2000
- [ 0.023931] smpboot: Booting Node 0, Processors #1 OK
- [ 0.002000] Initializing CPU#1
- [ 0.002000] Atom PSE erratum detected, BIOS microcode update recommended
- [ 0.002000] Disabled fast string operations
- [ 0.036066] Brought up 2 CPUs
- [ 0.036529] smpboot: Total of 2 processors activated (6384.58 BogoMIPS)
- [ 0.038082] PM: Registering ACPI NVS region [mem 0x3f5ed000-0x3f63efff] (335872 bytes)
- [ 0.038481] RTC time: 9:02:14, date: 09/22/13
- [ 0.038719] NET: Registered protocol family 16
- [ 0.039071] kworker/u:0 (18) used greatest stack depth: 7232 bytes left
- [ 0.040126] ACPI: bus type PCI registered
- [ 0.040300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.041014] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.041132] PCI: Using MMCONFIG for extended config space
- [ 0.041246] PCI: Using configuration type 1 for base access
- [ 0.042078] kworker/u:0 (36) used greatest stack depth: 6972 bytes left
- [ 0.074043] bio: create slab <bio-0> at 0
- [ 0.074214] ACPI: Added _OSI(Module Device)
- [ 0.074214] ACPI: Added _OSI(Processor Device)
- [ 0.074311] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.074426] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.077280] ACPI: EC: Look up EC in DSDT
- [ 0.081247] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.085094] ACPI: SSDT 3f680c90 0023F (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.085939] ACPI: Dynamic OEM Table Load:
- [ 0.086158] ACPI: SSDT (null) 0023F (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.086633] ACPI: SSDT 3f67fe10 001C1 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.087441] ACPI: Dynamic OEM Table Load:
- [ 0.087654] ACPI: SSDT (null) 001C1 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.093526] ACPI: SSDT 3f680f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.094368] ACPI: Dynamic OEM Table Load:
- [ 0.094585] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
- [ 0.095045] ACPI: SSDT 3f67ef10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.095840] ACPI: Dynamic OEM Table Load:
- [ 0.096005] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
- [ 0.105107] ACPI: Interpreter enabled
- [ 0.105240] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
- [ 0.105524] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
- [ 0.106008] ACPI: (supports S0 S3 S4 S5)
- [ 0.106121] ACPI: Using IOAPIC for interrupt routing
- [ 0.106309] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.128101] ACPI: Power Resource [FN00] (on)
- [ 0.132677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.132950] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
- [ 0.133276] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5034ab0), AE_ALREADY_EXISTS (20130117/psparse-537)
- [ 0.133670] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- [ 0.135610] PCI host bridge to bus 0000:00
- [ 0.135610] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.135610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.136019] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.136140] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.136264] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
- [ 0.136407] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
- [ 0.136628] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
- [ 0.136628] pci 0000:00:02.0: reg 10: [mem 0x54280000-0x542fffff]
- [ 0.136628] pci 0000:00:02.0: reg 14: [io 0x40e0-0x40e7]
- [ 0.136628] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
- [ 0.136628] pci 0000:00:02.0: reg 1c: [mem 0x54300000-0x5433ffff]
- [ 0.137092] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
- [ 0.137092] pci 0000:00:02.1: reg 10: [mem 0x54200000-0x5427ffff]
- [ 0.137290] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
- [ 0.137290] pci 0000:00:1b.0: reg 10: [mem 0xd0000000-0xd0003fff 64bit]
- [ 0.137290] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.137381] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.138092] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
- [ 0.138218] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.138302] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.138514] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
- [ 0.138514] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.138514] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.139072] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
- [ 0.139143] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
- [ 0.139288] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.139503] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
- [ 0.139503] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
- [ 0.139503] pci 0000:00:1d.1: System wakeup disabled by ACPI
- [ 0.140113] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
- [ 0.140136] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
- [ 0.140284] pci 0000:00:1d.2: System wakeup disabled by ACPI
- [ 0.140500] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
- [ 0.140500] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
- [ 0.140500] pci 0000:00:1d.3: System wakeup disabled by ACPI
- [ 0.141149] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
- [ 0.141149] pci 0000:00:1d.7: reg 10: [mem 0x54344400-0x543447ff]
- [ 0.141248] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.141375] pci 0000:00:1d.7: System wakeup disabled by ACPI
- [ 0.141590] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
- [ 0.142036] pci 0000:00:1e.0: System wakeup disabled by ACPI
- [ 0.142249] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
- [ 0.142249] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 000b)
- [ 0.142543] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
- [ 0.142543] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
- [ 0.142543] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
- [ 0.142543] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
- [ 0.142543] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
- [ 0.142543] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
- [ 0.143220] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x01018f
- [ 0.143220] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
- [ 0.143220] pci 0000:00:1f.2: reg 14: [io 0x40ec-0x40ef]
- [ 0.143220] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
- [ 0.143220] pci 0000:00:1f.2: reg 1c: [io 0x40e8-0x40eb]
- [ 0.143220] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
- [ 0.143220] pci 0000:00:1f.2: reg 24: [mem 0x00000000-0x000003ff]
- [ 0.143243] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.143425] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
- [ 0.143425] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
- [ 0.144135] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
- [ 0.144135] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
- [ 0.144168] pci 0000:01:00.0: reg 18: [mem 0x50010000-0x50010fff 64bit pref]
- [ 0.144201] pci 0000:01:00.0: reg 20: [mem 0x50000000-0x5000ffff 64bit pref]
- [ 0.144224] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
- [ 0.144331] pci 0000:01:00.0: supports D1 D2
- [ 0.144337] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.146043] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.146171] pci 0000:00:1c.0: bridge window [io 0x2000-0x3fff]
- [ 0.146181] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x541fffff]
- [ 0.146194] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x510fffff 64bit pref]
- [ 0.146316] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
- [ 0.146316] pci 0000:02:00.0: reg 10: [mem 0x52100000-0x5210ffff 64bit]
- [ 0.146469] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.147054] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.147176] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
- [ 0.147186] pci 0000:00:1c.1: bridge window [mem 0x52100000-0x531fffff]
- [ 0.147199] pci 0000:00:1c.1: bridge window [mem 0x51100000-0x520fffff 64bit pref]
- [ 0.147289] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
- [ 0.147289] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.147289] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.147289] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.147289] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
- [ 0.147298] pci_bus 0000:00: on NUMA node 0
- [ 0.147472] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
- [ 0.148181] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f5034ab0), AE_ALREADY_EXISTS (20130117/psparse-537)
- [ 0.148588] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.148769] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.149217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.150167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.151106] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.151883] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
- [ 0.152613] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12)
- [ 0.153420] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 9 10 11 12)
- [ 0.154174] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11 12)
- [ 0.155029] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.156682] ACPI: Enabled 2 GPEs in block 00 to 1F
- [ 0.157035] acpi root: \_SB_.PCI0 notify handler is installed
- [ 0.157120] Found 1 acpi root devices
- [ 0.157213] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- [ 0.157411] ACPI: No dock devices found.
- [ 0.158069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.158238] vgaarb: loaded
- [ 0.158352] vgaarb: bridge control possible 0000:00:02.0
- [ 0.159050] SCSI subsystem initialized
- [ 0.159160] ACPI: bus type ATA registered
- [ 0.159307] libata version 3.00 loaded.
- [ 0.160064] ACPI: bus type USB registered
- [ 0.160227] usbcore: registered new interface driver usbfs
- [ 0.160227] usbcore: registered new interface driver hub
- [ 0.160227] usbcore: registered new device driver usb
- [ 0.161104] pps_core: LinuxPPS API ver. 1 registered
- [ 0.161164] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.161387] PTP clock support registered
- [ 0.162086] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.162196] PCI: Using ACPI for IRQ routing
- [ 0.174098] PCI: pci_cache_line_size set to 64 bytes
- [ 0.174185] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 0.174191] e820: reserve RAM buffer [mem 0x3f5ed000-0x3fffffff]
- [ 0.174196] e820: reserve RAM buffer [mem 0x3f676000-0x3fffffff]
- [ 0.174201] e820: reserve RAM buffer [mem 0x3f6f0000-0x3fffffff]
- [ 0.174206] e820: reserve RAM buffer [mem 0x3f700000-0x3fffffff]
- [ 0.175370] NetLabel: Initializing
- [ 0.175495] NetLabel: domain hash size = 128
- [ 0.175607] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.175745] NetLabel: unlabeled traffic allowed by default
- [ 0.176059] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.176322] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.176456] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.177255] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.179052] Switching to clocksource hpet
- [ 0.190545] pnp: PnP ACPI init
- [ 0.190693] ACPI: bus type PNP registered
- [ 0.209348] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 7 [io 0x1000-0x1fff]
- [ 0.209780] system 00:00: [io 0x0600-0x0601] has been reserved
- [ 0.209908] system 00:00: [io 0x0800-0x080f] has been reserved
- [ 0.210049] system 00:00: [io 0x0400-0x047f] has been reserved
- [ 0.210172] system 00:00: [io 0x0500-0x053f] has been reserved
- [ 0.210296] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.210418] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.210540] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
- [ 0.210660] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.210785] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.210908] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.211058] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.211195] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.211235] pnp 00:01: [dma 4]
- [ 0.211386] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.211604] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.211956] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.212200] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.212382] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.212593] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.212792] pnp 00:07: Plug and Play ACPI device, IDs SYN1913 SYN1900 SYN0002 PNP0f13 (active)
- [ 0.212934] pnp: PnP ACPI: found 8 devices
- [ 0.213082] ACPI: bus type PNP unregistered
- [ 0.258356] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
- [ 0.258598] pci 0000:00:1f.2: BAR 5: assigned [mem 0x54340000-0x543403ff]
- [ 0.258728] pci 0000:01:00.0: BAR 6: assigned [mem 0x50020000-0x5003ffff pref]
- [ 0.258905] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.259049] pci 0000:00:1c.0: bridge window [io 0x2000-0x3fff]
- [ 0.259176] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x541fffff]
- [ 0.259303] pci 0000:00:1c.0: bridge window [mem 0x50000000-0x510fffff 64bit pref]
- [ 0.259488] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.259604] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
- [ 0.259730] pci 0000:00:1c.1: bridge window [mem 0x52100000-0x531fffff]
- [ 0.259856] pci 0000:00:1c.1: bridge window [mem 0x51100000-0x520fffff 64bit pref]
- [ 0.260063] pci 0000:00:1e.0: PCI bridge to [bus 03]
- [ 0.260750] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.260761] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.260768] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.260775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.260781] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
- [ 0.260788] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
- [ 0.260795] pci_bus 0000:01: resource 1 [mem 0x53200000-0x541fffff]
- [ 0.260801] pci_bus 0000:01: resource 2 [mem 0x50000000-0x510fffff 64bit pref]
- [ 0.260808] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
- [ 0.260814] pci_bus 0000:02: resource 1 [mem 0x52100000-0x531fffff]
- [ 0.260821] pci_bus 0000:02: resource 2 [mem 0x51100000-0x520fffff 64bit pref]
- [ 0.260828] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- [ 0.260834] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- [ 0.260840] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.260847] pci_bus 0000:03: resource 7 [mem 0x40000000-0xfebfffff]
- [ 0.260928] NET: Registered protocol family 2
- [ 0.261390] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.261569] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.261743] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.261908] TCP: reno registered
- [ 0.262056] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.262198] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.262498] NET: Registered protocol family 1
- [ 0.262835] RPC: Registered named UNIX socket transport module.
- [ 0.262957] RPC: Registered udp transport module.
- [ 0.263112] RPC: Registered tcp transport module.
- [ 0.263228] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.263369] pci 0000:00:02.0: Boot video device
- [ 0.263701] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1f10
- [ 0.263707] pci 0000:00:1d.0: Performing full reset
- [ 0.264219] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0081
- [ 0.264226] pci 0000:00:1d.1: Performing full reset
- [ 0.264700] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0081
- [ 0.264706] pci 0000:00:1d.2: Performing full reset
- [ 0.265250] pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0081
- [ 0.265258] pci 0000:00:1d.3: Performing full reset
- [ 0.265743] pci 0000:00:1d.7: EHCI: BIOS handoff
- [ 1.365034] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
- [ 1.365531] PCI: CLS 0 bytes, default 64
- [ 1.365664] Unpacking initramfs...
- [ 2.067838] Freeing initrd memory: 15680k freed
- [ 2.083595] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
- [ 2.083723] Simple Boot Flag at 0x44 set to 0x1
- [ 2.085310] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x208
- [ 2.085444] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x208
- [ 2.085693] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 2.085864] Scanning for low memory corruption every 60 seconds
- [ 2.086859] audit: initializing netlink socket (disabled)
- [ 2.087001] type=2000 audit(1379840536.085:1): initialized
- [ 2.137837] bounce pool size: 64 pages
- [ 2.137963] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 2.147965] VFS: Disk quotas dquot_6.5.2
- [ 2.148357] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.151472] NFS: Registering the id_resolver key type
- [ 2.151614] Key type id_resolver registered
- [ 2.151722] Key type id_legacy registered
- [ 2.152047] msgmni has been set to 1734
- [ 2.152443] SELinux: Registering netfilter hooks
- [ 2.153741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 2.153913] io scheduler noop registered
- [ 2.154052] io scheduler deadline registered
- [ 2.154495] io scheduler cfq registered (default)
- [ 2.154956] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
- [ 2.155363] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
- [ 2.155786] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.157642] ACPI: AC Adapter [ADP0] (on-line)
- [ 2.158197] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 2.158376] ACPI: Power Button [PWRB]
- [ 2.158693] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- [ 2.161902] ACPI: Lid Switch [LID0]
- [ 2.162308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 2.162482] ACPI: Power Button [PWRF]
- [ 2.163118] ACPI: Fan [FAN] (on)
- [ 2.191212] acpi device:10: registered as cooling_device1
- [ 2.191470] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
- [ 2.191777] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
- [ 2.192235] ACPI: Requesting acpi_cpufreq
- [ 2.193920] tsc: Marking TSC unstable due to TSC halts in idle
- [ 2.194109] ACPI: acpi_idle registered with cpuidle
- [ 2.208965] modprobe (711) used greatest stack depth: 6780 bytes left
- [ 2.213266] thermal LNXTHERM:00: registered as thermal_zone0
- [ 2.213385] ACPI: Thermal Zone [THRM] (33 C)
- [ 2.213906] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.217784] Non-volatile memory driver v1.3
- [ 2.217957] intel_rng: FWH not detected
- [ 2.218126] Linux agpgart interface v0.103
- [ 2.218715] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
- [ 2.218990] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
- [ 2.219574] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- [ 2.220003] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
- [ 2.220506] [drm] Initialized drm 1.1.0 20060810
- [ 2.221662] [drm] Memory usable by graphics device = 256M
- [ 2.221884] pci 0000:00:02.0: setting latency timer to 64
- [ 2.223612] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 2.223733] [drm] No driver support for vblank timestamp query.
- [ 2.223850] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.228521] loop: module loaded
- [ 2.229992] ata_piix 0000:00:1f.1: version 2.13
- [ 2.230291] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
- [ 2.230478] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 2.232965] scsi0 : ata_piix
- [ 2.234396] scsi1 : ata_piix
- [ 2.235076] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
- [ 2.235207] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
- [ 2.235634] ata2: port disabled--ignoring
- [ 2.235734] ata_piix 0000:00:1f.2: MAP [ P3 P3 P3 P3 ] (map_value => 0x0) (map_db->mask => 0x3
- [ 2.235971] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 2.236973] ACPI: Battery Slot [BAT0] (battery present)
- [ 2.238048] scsi2 : ata_piix
- [ 2.239196] scsi3 : ata_piix
- [ 2.240198] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40ec bmdma 0x40a0 irq 16
- [ 2.240320] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e8 bmdma 0x40a8 irq 16
- [ 2.241857] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 2.241977] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 2.242276] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 2.242394] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 2.242632] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
- [ 2.242745] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 2.242983] sky2: driver version 1.30
- [ 2.243575] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 2.244131] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
- [ 2.244701] r8169 0000:01:00.0 eth0: RTL8102e at 0xf8028000, 00:1e:33:76:dc:42, XID 14a00000 IRQ 42
- [ 2.245497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.245618] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
- [ 2.245630] ehci-pci: EHCI PCI platform driver
- [ 2.246111] ehci-pci 0000:00:1d.7: setting latency timer to 64
- [ 2.246122] ehci-pci 0000:00:1d.7: EHCI Host Controller
- [ 2.246412] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 2.246602] ehci-pci 0000:00:1d.7: debug port 1
- [ 2.246718] ehci-pci 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
- [ 2.246727] ehci-pci 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
- [ 2.246773] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 2.250654] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
- [ 2.250661] ehci-pci 0000:00:1d.7: supports USB remote wakeup
- [ 2.250710] ehci-pci 0000:00:1d.7: irq 21, io mem 0x54344400
- [ 2.250830] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 2.256038] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 2.256242] usb usb1: default language 0x0409
- [ 2.256260] usb usb1: udev 1, busnum 1, minor = 0
- [ 2.256267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.256383] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.256547] usb usb1: Product: EHCI Host Controller
- [ 2.256657] usb usb1: Manufacturer: Linux 3.9.9+ ehci_hcd
- [ 2.256769] usb usb1: SerialNumber: 0000:00:1d.7
- [ 2.257139] usb usb1: usb_probe_device
- [ 2.257149] usb usb1: configuration #1 chosen from 1 choice
- [ 2.257168] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 2.257317] hub 1-0:1.0: usb_probe_interface
- [ 2.257324] hub 1-0:1.0: usb_probe_interface - got id
- [ 2.257330] hub 1-0:1.0: USB hub found
- [ 2.257448] hub 1-0:1.0: 8 ports detected
- [ 2.257557] hub 1-0:1.0: standalone hub
- [ 2.257563] hub 1-0:1.0: no power switching (usb 1.0)
- [ 2.257568] hub 1-0:1.0: individual port over-current protection
- [ 2.257574] hub 1-0:1.0: power on to power good time: 20ms
- [ 2.257584] hub 1-0:1.0: local power source is good
- [ 2.257682] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 2.257924] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.258074] ohci_hcd: block sizes: ed 64 td 64
- [ 2.258222] uhci_hcd: USB Universal Host Controller Interface driver
- [ 2.258662] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 2.258672] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 2.258969] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 2.259185] uhci_hcd 0000:00:1d.0: detected 2 ports
- [ 2.259302] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
- [ 2.259307] uhci_hcd 0000:00:1d.0: Performing full reset
- [ 2.259327] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
- [ 2.259346] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00004080
- [ 2.259538] usb usb2: default language 0x0409
- [ 2.259555] usb usb2: udev 1, busnum 2, minor = 128
- [ 2.259562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.259678] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.259842] usb usb2: Product: UHCI Host Controller
- [ 2.259953] usb usb2: Manufacturer: Linux 3.9.9+ uhci_hcd
- [ 2.260100] usb usb2: SerialNumber: 0000:00:1d.0
- [ 2.260429] usb usb2: usb_probe_device
- [ 2.260438] usb usb2: configuration #1 chosen from 1 choice
- [ 2.260457] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 2.260606] hub 2-0:1.0: usb_probe_interface
- [ 2.260613] hub 2-0:1.0: usb_probe_interface - got id
- [ 2.260619] hub 2-0:1.0: USB hub found
- [ 2.260736] hub 2-0:1.0: 2 ports detected
- [ 2.260845] hub 2-0:1.0: standalone hub
- [ 2.260850] hub 2-0:1.0: no power switching (usb 1.0)
- [ 2.260855] hub 2-0:1.0: individual port over-current protection
- [ 2.260861] hub 2-0:1.0: power on to power good time: 2ms
- [ 2.260873] hub 2-0:1.0: local power source is good
- [ 2.260909] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 2.260991] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0
- [ 2.261307] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 2.261316] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 2.261625] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 2.261804] uhci_hcd 0000:00:1d.1: detected 2 ports
- [ 2.261920] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
- [ 2.261925] uhci_hcd 0000:00:1d.1: Performing full reset
- [ 2.261945] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
- [ 2.261990] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004060
- [ 2.262222] usb usb3: default language 0x0409
- [ 2.262239] usb usb3: udev 1, busnum 3, minor = 256
- [ 2.262246] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.262363] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.262528] usb usb3: Product: UHCI Host Controller
- [ 2.262639] usb usb3: Manufacturer: Linux 3.9.9+ uhci_hcd
- [ 2.262750] usb usb3: SerialNumber: 0000:00:1d.1
- [ 2.263119] usb usb3: usb_probe_device
- [ 2.263128] usb usb3: configuration #1 chosen from 1 choice
- [ 2.263148] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 2.263289] hub 3-0:1.0: usb_probe_interface
- [ 2.263296] hub 3-0:1.0: usb_probe_interface - got id
- [ 2.263302] hub 3-0:1.0: USB hub found
- [ 2.263422] hub 3-0:1.0: 2 ports detected
- [ 2.263530] hub 3-0:1.0: standalone hub
- [ 2.263535] hub 3-0:1.0: no power switching (usb 1.0)
- [ 2.263540] hub 3-0:1.0: individual port over-current protection
- [ 2.263546] hub 3-0:1.0: power on to power good time: 2ms
- [ 2.263555] hub 3-0:1.0: local power source is good
- [ 2.263589] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 2.263681] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1
- [ 2.263967] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 2.263976] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 2.264314] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 2.264493] uhci_hcd 0000:00:1d.2: detected 2 ports
- [ 2.264610] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
- [ 2.264615] uhci_hcd 0000:00:1d.2: Performing full reset
- [ 2.264635] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
- [ 2.264680] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00004040
- [ 2.264873] usb usb4: default language 0x0409
- [ 2.264890] usb usb4: udev 1, busnum 4, minor = 384
- [ 2.264897] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.265053] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.265219] usb usb4: Product: UHCI Host Controller
- [ 2.265331] usb usb4: Manufacturer: Linux 3.9.9+ uhci_hcd
- [ 2.265442] usb usb4: SerialNumber: 0000:00:1d.2
- [ 2.265783] usb usb4: usb_probe_device
- [ 2.265792] usb usb4: configuration #1 chosen from 1 choice
- [ 2.265810] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 2.265977] hub 4-0:1.0: usb_probe_interface
- [ 2.265984] hub 4-0:1.0: usb_probe_interface - got id
- [ 2.265991] hub 4-0:1.0: USB hub found
- [ 2.266143] hub 4-0:1.0: 2 ports detected
- [ 2.266256] hub 4-0:1.0: standalone hub
- [ 2.266261] hub 4-0:1.0: no power switching (usb 1.0)
- [ 2.266266] hub 4-0:1.0: individual port over-current protection
- [ 2.266271] hub 4-0:1.0: power on to power good time: 2ms
- [ 2.266282] hub 4-0:1.0: local power source is good
- [ 2.266317] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 2.266404] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2
- [ 2.266697] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 2.266706] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 2.267049] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 2.267230] uhci_hcd 0000:00:1d.3: detected 2 ports
- [ 2.267347] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
- [ 2.267353] uhci_hcd 0000:00:1d.3: Performing full reset
- [ 2.267373] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
- [ 2.267418] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00004020
- [ 2.267611] usb usb5: default language 0x0409
- [ 2.267628] usb usb5: udev 1, busnum 5, minor = 512
- [ 2.267634] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.267751] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.267913] usb usb5: Product: UHCI Host Controller
- [ 2.268048] usb usb5: Manufacturer: Linux 3.9.9+ uhci_hcd
- [ 2.268160] usb usb5: SerialNumber: 0000:00:1d.3
- [ 2.268499] usb usb5: usb_probe_device
- [ 2.268508] usb usb5: configuration #1 chosen from 1 choice
- [ 2.268528] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 2.268677] hub 5-0:1.0: usb_probe_interface
- [ 2.268685] hub 5-0:1.0: usb_probe_interface - got id
- [ 2.268691] hub 5-0:1.0: USB hub found
- [ 2.268808] hub 5-0:1.0: 2 ports detected
- [ 2.268917] hub 5-0:1.0: standalone hub
- [ 2.268924] hub 5-0:1.0: no power switching (usb 1.0)
- [ 2.268929] hub 5-0:1.0: individual port over-current protection
- [ 2.268934] hub 5-0:1.0: power on to power good time: 2ms
- [ 2.268944] hub 5-0:1.0: local power source is good
- [ 2.268984] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 2.269106] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.3
- [ 2.269411] usbcore: registered new interface driver usblp
- [ 2.269527] Initializing USB Mass Storage driver...
- [ 2.269818] usbcore: registered new interface driver usb-storage
- [ 2.269932] USB Mass Storage support registered.
- [ 2.270361] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
- [ 2.277769] i8042: Detected active multiplexing controller, rev 1.1
- [ 2.282069] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.282194] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 2.282377] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 2.282575] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 2.282754] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 2.283321] mousedev: PS/2 mouse device common for all mice
- [ 2.284409] rtc_cmos 00:02: RTC can wake from S4
- [ 2.284835] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 2.285003] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 2.285667] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
- [ 2.286592] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 2.286867] cpuidle: using governor ladder
- [ 2.287174] cpuidle: using governor menu
- [ 2.287282] EFI Variables Facility v0.08 2004-May-17
- [ 2.287696] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.290972] usbcore: registered new interface driver usbhid
- [ 2.291172] usbhid: USB HID core driver
- [ 2.296165] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
- [ 2.311984] Netfilter messages via NETLINK v0.30.
- [ 2.312170] nf_conntrack version 0.5.0 (15896 buckets, 63584 max)
- [ 2.312867] ctnetlink v0.93: registering with nfnetlink.
- [ 2.313284] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.313462] TCP: cubic registered
- [ 2.313570] Initializing XFRM netlink socket
- [ 2.314562] NET: Registered protocol family 10
- [ 2.315284] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.315488] sit: IPv6 over IPv4 tunneling driver
- [ 2.316443] NET: Registered protocol family 17
- [ 2.316622] Key type dns_resolver registered
- [ 2.317599] Using IPI No-Shortcut mode
- [ 2.318358] PM: Hibernation image not present or could not be loaded.
- [ 2.318393] registered taskstats version 1
- [ 2.319189] Magic number: 13:585:20
- [ 2.319465] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
- [ 2.319683] console [netcon0] enabled
- [ 2.319792] netconsole: network logging started
- [ 2.321827] ALSA device list:
- [ 2.321939] #0: HDA Intel at 0xd0000000 irq 43
- [ 2.329661] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 2.357179] ehci-pci 0000:00:1d.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.357201] hub 1-0:1.0: port 2: status 0501 change 0001
- [ 2.357250] ehci-pci 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.357265] hub 1-0:1.0: port 7: status 0501 change 0001
- [ 2.357295] ehci-pci 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.357310] hub 1-0:1.0: port 8: status 0501 change 0001
- [ 2.360159] uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00
- [ 2.363203] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 2.366196] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 2.368168] uhci_hcd 0000:00:1d.3: port 1 portsc 0082,00
- [ 2.368199] uhci_hcd 0000:00:1d.3: port 2 portsc 0082,00
- [ 2.457198] hub 1-0:1.0: state 7 ports 8 chg 0184 evt 0000
- [ 2.457239] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
- [ 2.508358] ehci-pci 0000:00:1d.7: port 2 reset complete, port enabled
- [ 2.508370] ehci-pci 0000:00:1d.7: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.559139] usb 1-2: new high-speed USB device number 2 using ehci-pci
- [ 2.610362] ehci-pci 0000:00:1d.7: port 2 reset complete, port enabled
- [ 2.610387] ehci-pci 0000:00:1d.7: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.673915] usb 1-2: default language 0x0409
- [ 2.675045] usb 1-2: udev 2, busnum 1, minor = 1
- [ 2.675062] usb 1-2: New USB device found, idVendor=19b6, idProduct=4096
- [ 2.675198] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.675328] usb 1-2: Product: USB Mass Storage Device
- [ 2.675454] usb 1-2: Manufacturer: USBest Technology
- [ 2.675577] usb 1-2: SerialNumber: 00000000000173
- [ 2.676001] usb 1-2: usb_probe_device
- [ 2.676043] usb 1-2: configuration #1 chosen from 1 choice
- [ 2.676167] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
- [ 2.676548] usb-storage 1-2:1.0: usb_probe_interface
- [ 2.676584] usb-storage 1-2:1.0: usb_probe_interface - got id
- [ 2.676872] scsi4 : usb-storage 1-2:1.0
- [ 2.677568] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
- [ 2.728365] ehci-pci 0000:00:1d.7: port 7 reset complete, port enabled
- [ 2.728391] ehci-pci 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.779098] usb 1-7: new high-speed USB device number 3 using ehci-pci
- [ 2.831359] ehci-pci 0000:00:1d.7: port 7 reset complete, port enabled
- [ 2.831374] ehci-pci 0000:00:1d.7: GetStatus port:7 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.927187] usb 1-7: skipped 1 descriptor after configuration
- [ 2.927206] usb 1-7: skipped 6 descriptors after interface
- [ 2.927225] usb 1-7: skipped 1 descriptor after endpoint
- [ 2.927237] usb 1-7: skipped 8 descriptors after interface
- [ 2.927945] usb 1-7: default language 0x0409
- [ 2.933166] usb 1-7: udev 3, busnum 1, minor = 2
- [ 2.933180] usb 1-7: New USB device found, idVendor=04f2, idProduct=b135
- [ 2.933318] usb 1-7: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 2.933444] usb 1-7: Product: CNF8029
- [ 2.933559] usb 1-7: Manufacturer: Chicony Electronics Co., Ltd.
- [ 2.933680] usb 1-7: SerialNumber: NULL
- [ 2.934505] usb 1-7: usb_probe_device
- [ 2.934526] usb 1-7: configuration #1 chosen from 1 choice
- [ 2.934913] usb 1-7: adding 1-7:1.0 (config #1, interface 0)
- [ 2.937893] usb 1-7: adding 1-7:1.1 (config #1, interface 1)
- [ 2.938633] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
- [ 2.989357] ehci-pci 0000:00:1d.7: port 8 reset complete, port enabled
- [ 2.989371] ehci-pci 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 3.040118] usb 1-8: new high-speed USB device number 4 using ehci-pci
- [ 3.092357] ehci-pci 0000:00:1d.7: port 8 reset complete, port enabled
- [ 3.092369] ehci-pci 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 3.162036] usb 1-8: default language 0x0409
- [ 3.166439] usb 1-8: udev 4, busnum 1, minor = 3
- [ 3.166453] usb 1-8: New USB device found, idVendor=0bda, idProduct=0158
- [ 3.166577] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.166702] usb 1-8: Product: USB2.0-CRW
- [ 3.166817] usb 1-8: Manufacturer: Generic
- [ 3.166933] usb 1-8: SerialNumber: 20071114173400000
- [ 3.167721] usb 1-8: usb_probe_device
- [ 3.167742] usb 1-8: configuration #1 chosen from 1 choice
- [ 3.169775] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
- [ 3.173127] usb-storage 1-8:1.0: usb_probe_interface
- [ 3.173183] usb-storage 1-8:1.0: usb_probe_interface - got id
- [ 3.173406] scsi5 : usb-storage 1-8:1.0
- [ 3.174509] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 3.174531] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 3.454073] usb usb3: suspend_rh (auto-stop)
- [ 3.454114] usb usb4: suspend_rh (auto-stop)
- [ 3.454150] usb usb2: suspend_rh (auto-stop)
- [ 3.454187] usb usb5: suspend_rh (auto-stop)
- [ 3.509265] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000, board id: 3655, fw id: 515309
- [ 3.550650] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
- [ 3.681396] scsi 4:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
- [ 3.684925] sd 4:0:0:0: [sda] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB)
- [ 3.685398] sd 4:0:0:0: Attached scsi generic sg0 type 0
- [ 3.685968] sd 4:0:0:0: [sda] Write Protect is off
- [ 3.686156] sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
- [ 3.686941] sd 4:0:0:0: [sda] Asking for cache data failed
- [ 3.687131] sd 4:0:0:0: [sda] Assuming drive cache: write through
- [ 3.691440] sd 4:0:0:0: [sda] Asking for cache data failed
- [ 3.691627] sd 4:0:0:0: [sda] Assuming drive cache: write through
- [ 3.811461] sda: sda1
- [ 3.815461] sd 4:0:0:0: [sda] Asking for cache data failed
- [ 3.815645] sd 4:0:0:0: [sda] Assuming drive cache: write through
- [ 3.815830] sd 4:0:0:0: [sda] Attached SCSI removable disk
- [ 4.178794] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
- [ 4.181257] sd 5:0:0:0: Attached scsi generic sg1 type 0
- [ 4.185181] sd 5:0:0:0: [sdb] Attached SCSI removable disk
- [ 4.362219] irq 20: nobody cared (try booting with the "irqpoll" option)
- [ 4.362344] Pid: 0, comm: swapper/0 Not tainted 3.9.9+ #99
- [ 4.362455] Call Trace:
- [ 4.362571] [<c10a0e54>] __report_bad_irq+0x24/0xc0
- [ 4.362685] [<c10a1241>] note_interrupt+0x161/0x1b0
- [ 4.362800] [<c14cc106>] ? cpuidle_wrap_enter+0x36/0x80
- [ 4.362913] [<c109f1aa>] handle_irq_event_percpu+0xaa/0x1d0
- [ 4.363028] [<c109f2fe>] handle_irq_event+0x2e/0x50
- [ 4.363140] [<c10a1b60>] ? unmask_irq+0x20/0x20
- [ 4.363209] [<c10a1ba6>] handle_fasteoi_irq+0x46/0xd0
- [ 4.363209] <IRQ> [<c1003e6d>] ? do_IRQ+0x3d/0xb0
- [ 4.363209] [<c105766a>] ? raw_notifier_call_chain+0x1a/0x20
- [ 4.363209] [<c16ee92c>] ? common_interrupt+0x2c/0x31
- [ 4.363209] [<c107007b>] ? get_buffer.constprop.19+0x3b/0x1c0
- [ 4.363209] [<c14cc106>] ? cpuidle_wrap_enter+0x36/0x80
- [ 4.363209] [<c14cc162>] ? cpuidle_enter_tk+0x12/0x20
- [ 4.363209] [<c14cb910>] ? read_measured_perf_ctrs+0x50/0x50
- [ 4.363209] [<c14cbdfc>] ? cpuidle_enter_state+0xc/0x40
- [ 4.363209] [<c14cbeb5>] ? cpuidle_idle_call+0x85/0x160
- [ 4.363209] [<c10094aa>] ? cpu_idle+0x5a/0x90
- [ 4.363209] [<c16d2158>] ? rest_init+0x58/0x60
- [ 4.363209] [<c19889e4>] ? start_kernel+0x307/0x30d
- [ 4.363209] [<c1988512>] ? repair_env_string+0x51/0x51
- [ 4.363209] [<c1988356>] ? i386_start_kernel+0x12c/0x12f
- [ 4.363209] handlers:
- [ 4.363209] [<c14548b0>] usb_hcd_irq
- [ 4.363209] [<c149f130>] i801_isr
- [ 4.363209] Disabling IRQ #20
- [ 7.405276] ata3.00: qc timeout (cmd 0x27)
- [ 7.405411] ata3.00: failed to read native max address (err_mask=0x4)
- [ 7.405540] ata3.00: HPA support seems broken, skipping HPA handling
- [ 7.559431] ata3.00: ATA-8: TOSHIBA MK8052GSX, LV010M, max UDMA/100
- [ 7.559549] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 7.562449] ata3.00: configured for UDMA/100 (no error)
- [ 7.562845] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5
- [ 7.563809] sd 2:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 7.564096] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 7.564285] sd 2:0:0:0: [sdc] Write Protect is off
- [ 7.564415] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 7.564537] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 37.728162] ata3: lost interrupt (Status 0x50)
- [ 37.728308] ata3: Status: { DSC DRDY }
- [ 37.728437] ata: irq arrived!
- [ 37.728541] ata: this was an idle IRQ!
- [ 37.728674] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 37.728789] ata3.00: Number of exceptions: 1
- [ 37.728902] ata3.00: failed command: READ DMA
- [ 37.729019] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 37.729019] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 37.729651] ata3.00: status: { DRDY }
- [ 37.729774] ata3: soft resetting link
- [ 37.886431] ata3.00: configured for UDMA/100 (no error)
- [ 37.886552] ata3.00: device reported invalid CHS sector 0
- [ 37.886673] ata3: EH complete
- [ 68.704725] ata3: lost interrupt (Status 0x50)
- [ 68.704847] ata3: Status: { DSC DRDY }
- [ 68.704955] ata: irq arrived!
- [ 68.705059] ata: this was an idle IRQ!
- [ 68.705205] ata3.00: limiting speed to UDMA/66:PIO4
- [ 68.705318] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 68.705434] ata3.00: Number of exceptions: 2
- [ 68.705544] ata3.00: failed command: READ DMA
- [ 68.705663] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 68.705663] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 68.705940] ata3.00: status: { DRDY }
- [ 68.706079] ata3: soft resetting link
- [ 68.863358] ata3.00: configured for UDMA/66 (no error)
- [ 68.863476] ata3.00: device reported invalid CHS sector 0
- [ 68.863599] ata3: EH complete
- [ 99.808716] ata3: lost interrupt (Status 0x50)
- [ 99.808835] ata3: Status: { DSC DRDY }
- [ 99.808942] ata: irq arrived!
- [ 99.809046] ata: this was an idle IRQ!
- [ 99.809188] ata3.00: limiting speed to UDMA/33:PIO4
- [ 99.809302] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 99.809417] ata3.00: Number of exceptions: 3
- [ 99.809528] ata3.00: failed command: READ DMA
- [ 99.809644] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 99.809644] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 99.809922] ata3.00: status: { DRDY }
- [ 99.810053] ata3: soft resetting link
- [ 99.967415] ata3.00: configured for UDMA/33 (no error)
- [ 99.967546] ata3.00: device reported invalid CHS sector 0
- [ 99.967671] ata3: EH complete
- [ 130.784147] ata3: lost interrupt (Status 0x50)
- [ 130.784281] ata3: Status: { DSC DRDY }
- [ 130.784397] ata: irq arrived!
- [ 130.784517] ata: this was an idle IRQ!
- [ 130.784648] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 130.784762] ata3.00: Number of exceptions: 4
- [ 130.784871] ata3.00: disabled
- [ 130.784980] ata3.00: failed command: READ DMA
- [ 130.785114] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 130.785114] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 130.785392] ata3.00: status: { DRDY }
- [ 130.785512] ata3: soft resetting link
- [ 130.936220] ata3.00: device reported invalid CHS sector 0
- [ 130.936373] sd 2:0:0:0: [sdc]
- [ 130.936500] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- [ 130.936613] sd 2:0:0:0: [sdc]
- [ 130.936718] Sense Key : Aborted Command [current] [descriptor]
- [ 130.936969] Descriptor sense data with sense descriptors (in hex):
- [ 130.937143] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
- [ 130.938069] 00 00 00 00
- [ 130.938411] sd 2:0:0:0: [sdc]
- [ 130.938517] Add. Sense: No additional sense information
- [ 130.938676] sd 2:0:0:0: [sdc] CDB:
- [ 130.938781] Read(10): 28 00 00 00 00 00 00 00 08 00
- [ 130.939470] end_request: I/O error, dev sdc, sector 0
- [ 130.939582] Buffer I/O error on device sdc, logical block 0
- [ 130.939718] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.939837] sd 2:0:0:0: killing request
- [ 130.939961] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.940111] ata3: EH complete
- [ 130.940256] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.940388] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.940513] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.940639] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.940762] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.940764] sd 2:0:0:0: [sdc] READ CAPACITY(16) failed
- [ 130.940770] sd 2:0:0:0: [sdc]
- [ 130.940772] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
- [ 130.940776] sd 2:0:0:0: [sdc] Sense not available.
- [ 130.941337] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.941462] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.941589] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.941711] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.941836] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.941959] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.941962] sd 2:0:0:0: [sdc] READ CAPACITY failed
- [ 130.941967] sd 2:0:0:0: [sdc]
- [ 130.941969] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
- [ 130.941973] sd 2:0:0:0: [sdc] Sense not available.
- [ 130.942528] Dev sdc: unable to read RDB block 0
- [ 130.942534] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.942552] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.942568] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.942582] sd 2:0:0:0: rejecting I/O to offline device
- [ 130.942591] sd 2:0:0:0: [sdc] Asking for cache data failed
- [ 130.942595] sd 2:0:0:0: [sdc] Assuming drive cache: write through
- [ 130.943433] sdc: unable to read partition table
- [ 130.943560] sdc: partition table beyond EOD, enabling native capacity
- [ 130.943920] sdc: detected capacity change from 80026361856 to 0
- [ 130.944132] ata3.00: detaching (SCSI 2:0:0:0)
- [ 130.944584] sd 2:0:0:0: [sdc] READ CAPACITY(16) failed
- [ 130.944715] sd 2:0:0:0: [sdc]
- [ 130.944833] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 130.944957] sd 2:0:0:0: [sdc] Sense not available.
- [ 130.945278] sd 2:0:0:0: [sdc] READ CAPACITY failed
- [ 130.945393] sd 2:0:0:0: [sdc]
- [ 130.945500] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 130.945613] sd 2:0:0:0: [sdc] Sense not available.
- [ 130.946041] sd 2:0:0:0: [sdc] Write Protect is on
- [ 130.946168] sd 2:0:0:0: [sdc] Mode Sense: 00 78 7f ff
- [ 130.946237] sd 2:0:0:0: [sdc] Truncating mode parameter data from 60261 to 512 bytes
- [ 130.947561] sd 2:0:0:0: [sdc] Got wrong page
- [ 130.947673] sd 2:0:0:0: [sdc] Assuming drive cache: write through
- [ 130.947787] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 130.947968] Freeing unused kernel memory: 468k freed
- [ 130.948592] Write protecting the kernel text: 7104k
- [ 130.948792] Write protecting the kernel read-only data: 2224k
- [ 130.951299] sd 2:0:0:0: [sdc] Stopping disk
- [ 130.951512] sd 2:0:0:0: [sdc] START_STOP FAILED
- [ 130.951645] sd 2:0:0:0: [sdc]
- [ 130.951768] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
- [ 130.959192] busybox (994) used greatest stack depth: 6692 bytes left
- [ 130.981941] all_generic_ide (1010) used greatest stack depth: 6524 bytes left
- [ 131.047604] blkid (1046) used greatest stack depth: 6204 bytes left
- [ 143.035132] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
- [ 143.036981] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
- [ 143.040727] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
- [ 143.051540] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement