Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- i13 ~ # dmesg
- 000000000000000 - 0000000000010000 (usable) ==> (reserved)
- last_pfn = 0x3fedf max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-CEFFF write-protect
- CF000-EFFFF uncachable
- F0000-FFFFF write-through
- MTRR variable ranges enabled:
- 0 base 000000000 mask FC0000000 write-back
- 1 base 03FF00000 mask FFFF00000 uncachable
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- initial memory mapped : 0 - 00c00000
- found SMP MP-table at [c00f5170] f5170
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 15000-1a000
- RAMDISK: 2f9b0000 - 2ff66c4f
- ACPI: RSDP 000f9140 00014 (v00 IntelR)
- ACPI: RSDT 3fee3040 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- ACPI: FACP 3fee30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- ACPI: DSDT 3fee3180 04738 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
- ACPI: FACS 3fee0000 00040
- ACPI: MCFG 3fee7a00 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- ACPI: APIC 3fee7900 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
- ACPI: SSDT 3fee7a80 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
- ACPI: SSDT 3fee7f10 002F1 (v01 PmRef CpuPm 00003000 INTL 20040311)
- ACPI: Local APIC address 0xfee00000
- 134MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- node 0 low ram: 00000000 - 377fe000
- node 0 bootmap 00016000 - 0001cf00
- (14 early reservations) ==> bootmem [0000000000 - 00377fe000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0000100000 - 0000661610] TEXT DATA BSS ==> [0000100000 - 0000661610]
- #3 [002f9b0000 - 002ff66c4f] RAMDISK ==> [002f9b0000 - 002ff66c4f]
- #4 [0000662000 - 00006650b6] BRK ==> [0000662000 - 00006650b6]
- #5 [00000f5180 - 0000100000] BIOS reserved ==> [00000f5180 - 0000100000]
- #6 [00000f5170 - 00000f5180] MP-table mpf ==> [00000f5170 - 00000f5180]
- #7 [000009f000 - 00000f1400] BIOS reserved ==> [000009f000 - 00000f1400]
- #8 [00000f157c - 00000f5170] BIOS reserved ==> [00000f157c - 00000f5170]
- #9 [00000f1400 - 00000f157c] MP-table mpc ==> [00000f1400 - 00000f157c]
- #10 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
- #11 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
- #12 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
- #13 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0003fedf
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x0003fedf
- On node 0 totalpages: 261742
- free_area_init_node: node 0, pgdat c0581840, node_mem_map c1001200
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3951 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 270 pages used for memmap
- HighMem zone: 34259 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x408
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- SMP: Allowing 4 CPUs, 2 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- PERCPU: Embedded 15 pages/cpu @c1c00000 s38872 r0 d22568 u1048576
- pcpu-alloc: s38872 r0 d22568 u1048576 alloc=1*4194304
- pcpu-alloc: [0] 0 1 2 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259696
- Kernel command line: BOOT_IMAGE=/gentoo/bzImage root=/dev/sda1 real_root=/dev/sda1 mdev
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- Initializing HighMem for node 0 (000377fe:0003fedf)
- Memory: 1025520k/1047420k available (3046k kernel code, 20656k reserved, 1602k data, 456k init, 138116k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc058b000 - 0xc05fd000 ( 456 kB)
- .data : 0xc03f9825 - 0xc058a2c0 (1602 kB)
- .text : 0xc0100000 - 0xc03f9825 (3046 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is enabled.
- NR_IRQS:512
- CPU 0 irqstacks, hard=c1c00000 soft=c1c01000
- Console: colour VGA+ 80x25
- console [tty0] enabled
- Fast TSC calibration using PIT
- Detected 1937.370 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3874.74 BogoMIPS (lpj=19373700)
- Security Framework initialized
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 6 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- using mwait in idle threads.
- Performance Events: Core2 events, Intel PMU driver.
- ... version: 2
- ... bit width: 40
- ... generic registers: 2
- ... value mask: 000000ffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 0000000700000003
- Checking 'hlt' instruction... OK.
- ACPI: Core revision 20091214
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
- CPU 1 irqstacks, hard=c1d00000 soft=c1d01000
- Booting Node 0, Processors #1
- Initializing CPU#1
- Brought up 2 CPUs
- Total of 2 processors activated (7750.31 BogoMIPS).
- xor: automatically using best checksumming function: pIII_sse
- pIII_sse : 6858.000 MB/sec
- xor: using function: pIII_sse (6858.000 MB/sec)
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- dca service started, version 1.12.1
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- PCI: Using MMCONFIG for extended config space
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
- pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- pci_root PNP0A08:00: host bridge window [mem 0x3ff00000-0xfebfffff] (ignored)
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:01.0: PME# disabled
- pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
- pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
- pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
- pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.7: PME# disabled
- pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1d.0: reg 20: [io 0xfd00-0xfd1f]
- pci 0000:00:1d.1: reg 20: [io 0xfc00-0xfc1f]
- pci 0000:00:1d.2: reg 20: [io 0xfb00-0xfb1f]
- pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
- pci 0000:00:1f.2: reg 10: [io 0xfa00-0xfa07]
- pci 0000:00:1f.2: reg 14: [io 0xf900-0xf903]
- pci 0000:00:1f.2: reg 18: [io 0xf800-0xf807]
- pci 0000:00:1f.2: reg 1c: [io 0xf700-0xf703]
- pci 0000:00:1f.2: reg 20: [io 0xf600-0xf60f]
- pci 0000:00:1f.2: reg 24: [io 0xf500-0xf50f]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff]
- pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
- pci 0000:00:1f.5: reg 10: [io 0xf300-0xf307]
- pci 0000:00:1f.5: reg 14: [io 0xf200-0xf203]
- pci 0000:00:1f.5: reg 18: [io 0xf100-0xf107]
- pci 0000:00:1f.5: reg 1c: [io 0xf000-0xf003]
- pci 0000:00:1f.5: reg 20: [io 0xef00-0xef0f]
- pci 0000:00:1f.5: reg 24: [io 0xee00-0xee0f]
- pci 0000:00:1f.5: PME# supported from D3hot
- pci 0000:00:1f.5: PME# disabled
- pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
- pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
- pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
- pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:02:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
- pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
- pci 0000:02:00.0: PME# supported from D3hot
- pci 0000:02:00.0: PME# disabled
- pci 0000:02:00.1: reg 10: [io 0xbf00-0xbf07]
- pci 0000:02:00.1: reg 14: [io 0xbe00-0xbe03]
- pci 0000:02:00.1: reg 18: [io 0xbd00-0xbd07]
- pci 0000:02:00.1: reg 1c: [io 0xbc00-0xbc03]
- pci 0000:02:00.1: reg 20: [io 0xbb00-0xbb0f]
- pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
- pci 0000:00:1c.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
- pci 0000:03:06.0: reg 10: [io 0xce00-0xceff]
- pci 0000:03:06.0: reg 14: [mem 0xfdeff000-0xfdeff0ff]
- pci 0000:03:06.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- pci 0000:03:06.0: supports D1 D2
- pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:03:06.0: PME# disabled
- pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
- pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 14 15)
- ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- SCSI subsystem initialized
- libata version 3.00 loaded.
- raid6: int32x1 667 MB/s
- raid6: int32x2 776 MB/s
- raid6: int32x4 609 MB/s
- raid6: int32x8 465 MB/s
- raid6: mmxx1 2550 MB/s
- raid6: mmxx2 2840 MB/s
- raid6: sse1x1 1722 MB/s
- raid6: sse1x2 2089 MB/s
- raid6: sse2x1 3211 MB/s
- raid6: sse2x2 3729 MB/s
- raid6: using algorithm sse2x2 (3729 MB/s)
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 16 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:01: [io 0x04d0-0x04d1] has been reserved
- system 00:01: [io 0x0a00-0x0a7f] has been reserved
- system 00:01: [io 0x0880-0x088f] has been reserved
- system 00:0c: [io 0x0400-0x04bf] could not be reserved
- system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:0f: [mem 0x000f0000-0x000f3fff] could not be reserved
- system 00:0f: [mem 0x000f4000-0x000f7fff] could not be reserved
- system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved
- system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved
- system 00:0f: [mem 0x3fee0000-0x3fefffff] could not be reserved
- system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:0f: [mem 0x00100000-0x3fedffff] could not be reserved
- system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:0f: [mem 0xfed14000-0xfed1dfff] has been reserved
- system 00:0f: [mem 0xfed20000-0xfed8ffff] has been reserved
- system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
- system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
- system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
- pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
- pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
- pci 0000:00:1c.0: PCI bridge to [bus 02-02]
- pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
- pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff]
- pci 0000:00:1c.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
- pci 0000:03:06.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
- pci 0000:00:1e.0: PCI bridge to [bus 03-03]
- pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
- pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
- pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:01.0: setting latency timer to 64
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
- pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
- pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
- pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
- pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
- pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
- pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
- pci_bus 0000:03: resource 3 [io 0x0000-0xffff]
- pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- pci 0000:01:00.0: Boot video device
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 5851k freed
- apm: BIOS not found.
- audit: initializing netlink socket (disabled)
- type=2000 audit(1273570658.359:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- msgmni has been set to 1746
- alg: No test for stdrng (krng)
- async_tx: api initialized (async)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:01.0: setting latency timer to 64
- pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- pcieport 0000:00:1c.0: setting latency timer to 64
- pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- brd: module loaded
- loop: module loaded
- input: Macintosh mouse button emulation as /devices/virtual/input/input0
- Uniform Multi-Platform E-IDE driver
- ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
- Probing IDE interface ide0...
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- Probing IDE interface ide1...
- ide1 at 0x170-0x177,0x376 on irq 15
- ide-gd driver 1.18
- ide-cd driver 5.00
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
- pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pata_jmicron 0000:02:00.1: setting latency timer to 64
- scsi0 : pata_jmicron
- scsi1 : pata_jmicron
- ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
- ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
- PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- cpuidle: using governor ladder
- ioatdma: Intel(R) QuickData Technology Driver 4.00
- TCP cubic registered
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- registered taskstats version 1
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
- ata1.00: configured for UDMA/33
- scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 0:0:0:0: Attached scsi CD-ROM sr0
- Freeing unused kernel memory: 456k freed
- udev: starting version 151
- FDC 0 is a post-1991 82077
- ahci 0000:02:00.0: version 3.0
- ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ahci 0000:02:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
- ata_piix 0000:00:1f.2: version 2.13
- ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
- ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- ahci 0000:02:00.0: setting latency timer to 64
- scsi2 : ahci
- scsi3 : ahci
- ata3: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 16
- ata4: DUMMY
- ata_piix 0000:00:1f.2: setting latency timer to 64
- scsi4 : ata_piix
- scsi5 : ata_piix
- ata5: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
- ata6: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
- ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- ata_piix 0000:00:1f.5: setting latency timer to 64
- scsi6 : ata_piix
- scsi7 : ata_piix
- ata7: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xef00 irq 19
- ata8: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xef08 irq 19
- input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
- ata7: SATA link down (SStatus 0 SControl 300)
- ata8: SATA link down (SStatus 0 SControl 300)
- ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata3.00: ATA-8: STM3750528AS, CC34, max UDMA/133
- ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata3.00: configured for UDMA/133
- scsi 2:0:0:0: Direct-Access ATA STM3750528AS CC34 PQ: 0 ANSI: 5
- sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- sd 2:0:0:0: [sda] Write Protect is off
- sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
- sd 2:0:0:0: [sda] Attached SCSI disk
- ata6.00: SATA link down (SStatus 0 SControl 300)
- ata6.01: SATA link down (SStatus 4 SControl 300)
- ata5.00: SATA link down (SStatus 4 SControl 300)
- ata5.01: SATA link down (SStatus 4 SControl 300)
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
- device-mapper: multipath: version 1.1.1 loaded
- JFS: nTxBlock = 8067, nTxLock = 64538
- dracut: Remounting /dev/sda1 with -o ro,noatime
- dracut: Mounted root filesystem /dev/sda1
- dracut: Switching root
- udev: starting version 151
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Linux agpgart interface v0.103
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
- iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1a.0: setting latency timer to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:1a.1: setting latency timer to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- ACPI: Power Button [PWRF]
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- ehci_hcd 0000:00:1a.7: setting latency timer to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
- ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 4 ports detected
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
- ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 6 ports detected
- sr 0:0:0:0: Attached scsi generic sg0 type 5
- sd 2:0:0:0: Attached scsi generic sg1 type 0
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [THRM] (42 C)
- ACPI: SSDT 3fee7e80 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
- input: PC Speaker as /devices/platform/pcspkr/input/input5
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- r8169 0000:03:06.0: no PCI Express capability
- eth0: RTL8169sc/8110sc at 0xf898c000, 00:16:17:93:cd:cb, XID 18000000 IRQ 21
- parport_pc 00:09: reported by Plug and Play ACPI
- parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- ACPI: Fan [FAN] (on)
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ppdev: user-space parallel port driver
- rtc_cmos 00:03: RTC can wake from S4
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, 242 bytes nvram
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- HDA Intel 0000:00:1b.0: irq 26 for MSI/MSI-X
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- nvidia: module license 'NVIDIA' taints kernel.
- Disabling lock debugging due to kernel taint
- hda_codec: ALC883: BIOS auto-probing.
- input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
- nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- nvidia 0000:01:00.0: setting latency timer to 64
- vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
- REISERFS (device sda7): found reiserfs format "3.6" with standard journal
- REISERFS (device sda7): using ordered data mode
- REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- REISERFS (device sda7): checking transaction log (sda7)
- REISERFS (device sda7): Using r5 hash to sort names
- EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
- EXT4-fs (sda3): mounted filesystem with ordered data mode
- EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
- EXT4-fs (sda4): mounted filesystem with ordered data mode
- r8169: eth0: link up
- Adding 1020088k swap on /dev/sda6. Priority:-1 extents:1 across:1020088k
- coretemp coretemp.0: Using relative temperature scale!
- coretemp coretemp.1: Using relative temperature scale!
- w83627ehf: Found W83627EHG chip at 0xa10
- ACPI: I/O resource w83627ehf [0xa15-0xa16] conflicts with ACPI region SEN1 [0xa15-0xa16]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- eth0: no IPv6 routers present
- HDA Intel 0000:00:1b.0: PCI INT A disabled
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- HDA Intel 0000:00:1b.0: irq 26 for MSI/MSI-X
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- hda_codec: ALC883: BIOS auto-probing.
- input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
- UDP: bad checksum. From 68.146.106.105:1024 to 109.86.183.69:50022 ulen 111
- usb 4-1: new full speed USB device using uhci_hcd and address 2
- usb 4-1: device descriptor read/64, error -71
- usb 4-1: device descriptor read/64, error -71
- usb 4-1: new full speed USB device using uhci_hcd and address 3
- usb 4-1: device descriptor read/64, error -71
- usb 4-1: device descriptor read/64, error -71
- usb 4-1: new full speed USB device using uhci_hcd and address 4
- usb 4-1: device not accepting address 4, error -71
- usb 4-1: new full speed USB device using uhci_hcd and address 5
- usb 4-1: device not accepting address 5, error -71
- hub 4-0:1.0: unable to enumerate USB device on port 1
- HDA Intel 0000:00:1b.0: PCI INT A disabled
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- HDA Intel 0000:00:1b.0: irq 26 for MSI/MSI-X
- HDA Intel 0000:00:1b.0: setting latency timer to 64
- hda_codec: ALC883: BIOS auto-probing.
- input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
- UDP: short packet: From 0.48.144.246:0 0/181 to 0.112.190.246:0
- TCP: Peer 188.220.197.122:19543/49279 unexpectedly shrunk window 2730753817:2730762437 (repaired)
- TCP: Peer 188.220.197.122:19543/49279 unexpectedly shrunk window 2730753817:2730762437 (repaired)
- TCP: Peer 188.220.197.122:19543/49279 unexpectedly shrunk window 2730753817:2730762437 (repaired)
- TCP: Peer 188.220.197.122:19543/33776 unexpectedly shrunk window 453166208:453180544 (repaired)
- TCP: Peer 188.220.197.122:19543/33776 unexpectedly shrunk window 453166208:453180544 (repaired)
- TCP: Peer 188.220.197.122:19543/33776 unexpectedly shrunk window 453484520:453486072 (repaired)
- TCP: Peer 188.220.197.122:19543/33776 unexpectedly shrunk window 453484520:453486072 (repaired)
- UDP: short packet: From 109.86.183.69:0 0/142 to 0.112.190.246:0
- UDP: short packet: From 109.86.183.69:0 0/142 to 0.112.190.246:0
- HDA Intel 0000:00:1b.0: PCI INT A disabled
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement