API tools faq
paste
Guest User

Untitled

a guest
Feb 26th, 2011
111
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 74.63 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
  4. [ 0.000000] KERNEL supported cpus:
  5. [ 0.000000] Intel GenuineIntel
  6. [ 0.000000] AMD AuthenticAMD
  7. [ 0.000000] NSC Geode by NSC
  8. [ 0.000000] Cyrix CyrixInstead
  9. [ 0.000000] Centaur CentaurHauls
  10. [ 0.000000] Transmeta GenuineTMx86
  11. [ 0.000000] Transmeta TransmetaCPU
  12. [ 0.000000] UMC UMC UMC UMC
  13. [ 0.000000] BIOS-provided physical RAM map:
  14. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  15. [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  16. [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  17. [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
  18. [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
  19. [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
  20. [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  21. [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  22. [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  23. [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  24. [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  25. [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  26. [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
  27. [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
  28. [ 0.000000] DMI present.
  29. [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x100000
  30. [ 0.000000] MTRR default type: uncachable
  31. [ 0.000000] MTRR fixed ranges enabled:
  32. [ 0.000000] 00000-9FFFF write-back
  33. [ 0.000000] A0000-BFFFF uncachable
  34. [ 0.000000] C0000-D7FFF write-protect
  35. [ 0.000000] D8000-DBFFF uncachable
  36. [ 0.000000] DC000-FFFFF write-protect
  37. [ 0.000000] MTRR variable ranges enabled:
  38. [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
  39. [ 0.000000] 1 base 000000000 mask F00000000 write-back
  40. [ 0.000000] 2 base 100000000 mask FC0000000 write-back
  41. [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
  42. [ 0.000000] 4 disabled
  43. [ 0.000000] 5 disabled
  44. [ 0.000000] 6 disabled
  45. [ 0.000000] 7 disabled
  46. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  47. [ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
  48. [ 0.000000] initial memory mapped : 0 - 01800000
  49. [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
  50. [ 0.000000] 0000000000 - 0000400000 page 4k
  51. [ 0.000000] 0000400000 - 0037000000 page 2M
  52. [ 0.000000] 0037000000 - 00373fe000 page 4k
  53. [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
  54. [ 0.000000] RAMDISK: 376bc000 - 37fefeef
  55. [ 0.000000] Allocated new RAMDISK: 00100000 - 00a33eef
  56. [ 0.000000] Move RAMDISK from 00000000376bc000 - 0000000037fefeee to 00100000 - 00a33eee
  57. [ 0.000000] ACPI: RSDP 000f8480 00024 (v02 HP )
  58. [ 0.000000] ACPI: XSDT bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
  59. [ 0.000000] ACPI: FACP bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
  60. [ 0.000000] ACPI: DSDT bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
  61. [ 0.000000] ACPI: FACS bfee2fc0 00040
  62. [ 0.000000] ACPI: HPET bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
  63. [ 0.000000] ACPI: MCFG bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
  64. [ 0.000000] ACPI: TMOR bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
  65. [ 0.000000] ACPI: APIC bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
  66. [ 0.000000] ACPI: BOOT bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
  67. [ 0.000000] ACPI: SLIC bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
  68. [ 0.000000] ACPI: SSDT bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
  69. [ 0.000000] ACPI: SSDT bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
  70. [ 0.000000] ACPI: SSDT bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
  71. [ 0.000000] ACPI: SSDT bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
  72. [ 0.000000] ACPI: Local APIC address 0xfee00000
  73. [ 0.000000] 2186MB HIGHMEM available.
  74. [ 0.000000] 883MB LOWMEM available.
  75. [ 0.000000] mapped low ram: 0 - 373fe000
  76. [ 0.000000] low ram: 0 - 373fe000
  77. [ 0.000000] node 0 low ram: 00000000 - 373fe000
  78. [ 0.000000] node 0 bootmap 00009000 - 0000fe80
  79. [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
  80. [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  81. [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  82. [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
  83. [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4]
  84. [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
  85. [ 0.000000] #5 [00014ca000 - 00014d0150] BRK ==> [00014ca000 - 00014d0150]
  86. [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
  87. [ 0.000000] #7 [0000100000 - 0000a33eef] NEW RAMDISK ==> [0000100000 - 0000a33eef]
  88. [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
  89. [ 0.000000] found SMP MP-table at [c00f8520] f8520
  90. [ 0.000000] Zone PFN ranges:
  91. [ 0.000000] DMA 0x00000000 -> 0x00001000
  92. [ 0.000000] Normal 0x00001000 -> 0x000373fe
  93. [ 0.000000] HighMem 0x000373fe -> 0x000bfed0
  94. [ 0.000000] Movable zone start PFN for each node
  95. [ 0.000000] early_node_map[2] active PFN ranges
  96. [ 0.000000] 0: 0x00000000 -> 0x0000009f
  97. [ 0.000000] 0: 0x00000100 -> 0x000bfed0
  98. [ 0.000000] On node 0 totalpages: 786031
  99. [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000
  100. [ 0.000000] DMA zone: 32 pages used for memmap
  101. [ 0.000000] DMA zone: 0 pages reserved
  102. [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
  103. [ 0.000000] Normal zone: 1736 pages used for memmap
  104. [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
  105. [ 0.000000] HighMem zone: 4374 pages used for memmap
  106. [ 0.000000] HighMem zone: 555452 pages, LIFO batch:31
  107. [ 0.000000] Using APIC driver default
  108. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
  109. [ 0.000000] ACPI: Local APIC address 0xfee00000
  110. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  111. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  112. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  113. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  114. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  115. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  116. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  117. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  118. [ 0.000000] ACPI: IRQ0 used by override.
  119. [ 0.000000] ACPI: IRQ2 used by override.
  120. [ 0.000000] ACPI: IRQ9 used by override.
  121. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  122. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  123. [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  124. [ 0.000000] nr_irqs_gsi: 24
  125. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  126. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
  127. [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
  128. [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
  129. [ 0.000000] Booting paravirtualized kernel on bare hardware
  130. [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
  131. [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34296 r0 d23048 u2097152
  132. [ 0.000000] pcpu-alloc: s34296 r0 d23048 u2097152 alloc=1*4194304
  133. [ 0.000000] pcpu-alloc: [0] 0 1
  134. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779889
  135. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=f1b3dc74-49d7-41b8-bf57-7db0721fcedf ro quiet
  136. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  137. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  138. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  139. [ 0.000000] Enabling fast FPU save and restore... done.
  140. [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
  141. [ 0.000000] Initializing CPU#0
  142. [ 0.000000] Initializing HighMem for node 0 (000373fe:000bfed0)
  143. [ 0.000000] Memory: 3103092k/3144512k available (2501k kernel code, 39940k reserved, 1323k data, 376k init, 2239304k highmem)
  144. [ 0.000000] virtual kernel memory layout:
  145. [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
  146. [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
  147. [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
  148. [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
  149. [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB)
  150. [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB)
  151. [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB)
  152. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  153. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  154. [ 0.000000] Hierarchical RCU implementation.
  155. [ 0.000000] NR_IRQS:1280
  156. [ 0.000000] Extended CMOS year: 2000
  157. [ 0.000000] Console: colour VGA+ 80x25
  158. [ 0.000000] console [tty0] enabled
  159. [ 0.000000] hpet clockevent registered
  160. [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  161. [ 0.000000] Fast TSC calibration using PIT
  162. [ 0.000000] Detected 1829.031 MHz processor.
  163. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.06 BogoMIPS (lpj=7316124)
  164. [ 0.004021] Security Framework initialized
  165. [ 0.004027] SELinux: Disabled at boot.
  166. [ 0.004033] Mount-cache hash table entries: 512
  167. [ 0.004158] Initializing cgroup subsys ns
  168. [ 0.004161] Initializing cgroup subsys cpuacct
  169. [ 0.004166] Initializing cgroup subsys devices
  170. [ 0.004168] Initializing cgroup subsys freezer
  171. [ 0.004170] Initializing cgroup subsys net_cls
  172. [ 0.004194] CPU: L1 I cache: 32K, L1 D cache: 32K
  173. [ 0.004196] CPU: L2 cache: 2048K
  174. [ 0.004199] CPU: Physical Processor ID: 0
  175. [ 0.004201] CPU: Processor Core ID: 0
  176. [ 0.004204] mce: CPU supports 6 MCE banks
  177. [ 0.004213] CPU0: Thermal monitoring enabled (TM2)
  178. [ 0.004217] using mwait in idle threads.
  179. [ 0.004224] Performance Events: Core2 events, Intel PMU driver.
  180. [ 0.004231] ... version: 2
  181. [ 0.004233] ... bit width: 40
  182. [ 0.004234] ... generic registers: 2
  183. [ 0.004236] ... value mask: 000000ffffffffff
  184. [ 0.004238] ... max period: 000000007fffffff
  185. [ 0.004240] ... fixed-purpose events: 3
  186. [ 0.004242] ... event mask: 0000000700000003
  187. [ 0.004246] Checking 'hlt' instruction... OK.
  188. [ 0.021211] ACPI: Core revision 20090903
  189. [ 0.032061] Enabling APIC mode: Flat. Using 1 I/O APICs
  190. [ 0.032433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  191. [ 0.072200] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
  192. [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
  193. [ 0.008000] Initializing CPU#1
  194. [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
  195. [ 0.008000] CPU: L2 cache: 2048K
  196. [ 0.008000] CPU: Physical Processor ID: 0
  197. [ 0.008000] CPU: Processor Core ID: 1
  198. [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
  199. [ 0.160052] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
  200. [ 0.160061] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  201. [ 0.164048] Brought up 2 CPUs
  202. [ 0.164051] Total of 2 processors activated (7315.92 BogoMIPS).
  203. [ 0.164501] CPU0 attaching sched-domain:
  204. [ 0.164505] domain 0: span 0-1 level MC
  205. [ 0.164508] groups: 0 1
  206. [ 0.164513] CPU1 attaching sched-domain:
  207. [ 0.164515] domain 0: span 0-1 level MC
  208. [ 0.164518] groups: 1 0
  209. [ 0.164577] devtmpfs: initialized
  210. [ 0.164577] regulator: core version 0.5
  211. [ 0.164577] NET: Registered protocol family 16
  212. [ 0.164577] ACPI: bus type pci registered
  213. [ 0.164577] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  214. [ 0.164577] PCI: MCFG area at e0000000 reserved in E820
  215. [ 0.164577] PCI: Using MMCONFIG for extended config space
  216. [ 0.164577] PCI: Using configuration type 1 for base access
  217. [ 0.164577] bio: create slab <bio-0> at 0
  218. [ 0.164750] ACPI: EC: Look up EC in DSDT
  219. [ 0.165919] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
  220. [ 0.165926] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node f6c0f648), AE_NOT_FOUND
  221. [ 0.169600] ACPI: BIOS _OSI(Linux) query ignored
  222. [ 0.170886] ACPI: Interpreter enabled
  223. [ 0.170891] ACPI: (supports S0 S3 S4 S5)
  224. [ 0.170912] ACPI: Using IOAPIC for interrupt routing
  225. [ 0.176695] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  226. [ 0.176963] ACPI: No dock devices found.
  227. [ 0.177556] ACPI: PCI Root Bridge [PCI0] (0000:00)
  228. [ 0.177678] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  229. [ 0.177682] pci 0000:00:01.0: PME# disabled
  230. [ 0.180023] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
  231. [ 0.180096] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
  232. [ 0.180176] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8404800-0xf8404bff]
  233. [ 0.180246] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  234. [ 0.180252] pci 0000:00:1a.7: PME# disabled
  235. [ 0.180313] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8400000-0xf8403fff]
  236. [ 0.180380] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  237. [ 0.180386] pci 0000:00:1b.0: PME# disabled
  238. [ 0.180489] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  239. [ 0.180495] pci 0000:00:1c.0: PME# disabled
  240. [ 0.180600] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  241. [ 0.180606] pci 0000:00:1c.1: PME# disabled
  242. [ 0.180718] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  243. [ 0.180723] pci 0000:00:1c.5: PME# disabled
  244. [ 0.180794] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
  245. [ 0.180867] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
  246. [ 0.180939] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
  247. [ 0.181016] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8404c00-0xf8404fff]
  248. [ 0.181086] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  249. [ 0.181092] pci 0000:00:1d.7: PME# disabled
  250. [ 0.181283] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
  251. [ 0.181288] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
  252. [ 0.181297] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
  253. [ 0.181359] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
  254. [ 0.181368] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
  255. [ 0.181377] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
  256. [ 0.181386] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
  257. [ 0.181395] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
  258. [ 0.181476] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
  259. [ 0.181485] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
  260. [ 0.181494] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
  261. [ 0.181503] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
  262. [ 0.181512] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
  263. [ 0.181522] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8404000-0xf84047ff]
  264. [ 0.181569] pci 0000:00:1f.2: PME# supported from D3hot
  265. [ 0.181575] pci 0000:00:1f.2: PME# disabled
  266. [ 0.181612] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
  267. [ 0.181640] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
  268. [ 0.181725] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
  269. [ 0.181742] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
  270. [ 0.181760] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
  271. [ 0.181770] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
  272. [ 0.181780] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
  273. [ 0.182001] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
  274. [ 0.182005] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
  275. [ 0.182010] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
  276. [ 0.182201] pci 0000:02:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff]
  277. [ 0.182450] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  278. [ 0.182464] pci 0000:02:00.0: PME# disabled
  279. [ 0.182573] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  280. [ 0.182736] pci 0000:00:1c.0: bridge io port: [0x4000-0x7fff]
  281. [ 0.182742] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
  282. [ 0.182751] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
  283. [ 0.182818] pci 0000:00:1c.1: bridge io port: [0x8000-0xbfff]
  284. [ 0.182824] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
  285. [ 0.182833] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
  286. [ 0.182915] pci 0000:06:00.0: reg 10 io port: [0xc000-0xc0ff]
  287. [ 0.182947] pci 0000:06:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff]
  288. [ 0.182978] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
  289. [ 0.183045] pci 0000:06:00.0: supports D1 D2
  290. [ 0.183047] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
  291. [ 0.183055] pci 0000:06:00.0: PME# disabled
  292. [ 0.183108] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  293. [ 0.183224] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
  294. [ 0.183229] pci 0000:00:1c.5: bridge 32bit mmio: [0xf8000000-0xf80fffff]
  295. [ 0.183303] pci 0000:07:09.0: reg 10 32bit mmio: [0xf8100000-0xf81007ff]
  296. [ 0.183368] pci 0000:07:09.0: supports D1 D2
  297. [ 0.183370] pci 0000:07:09.0: PME# supported from D0 D1 D2 D3hot D3cold
  298. [ 0.183376] pci 0000:07:09.0: PME# disabled
  299. [ 0.183424] pci 0000:07:09.1: reg 10 32bit mmio: [0xf8100800-0xf81008ff]
  300. [ 0.183490] pci 0000:07:09.1: supports D1 D2
  301. [ 0.183492] pci 0000:07:09.1: PME# supported from D0 D1 D2 D3hot D3cold
  302. [ 0.183498] pci 0000:07:09.1: PME# disabled
  303. [ 0.183545] pci 0000:07:09.2: reg 10 32bit mmio: [0xf8100c00-0xf8100cff]
  304. [ 0.183612] pci 0000:07:09.2: supports D1 D2
  305. [ 0.183615] pci 0000:07:09.2: PME# supported from D0 D1 D2 D3hot D3cold
  306. [ 0.183620] pci 0000:07:09.2: PME# disabled
  307. [ 0.183669] pci 0000:07:09.3: reg 10 32bit mmio: [0xf8101000-0xf81010ff]
  308. [ 0.183735] pci 0000:07:09.3: supports D1 D2
  309. [ 0.183738] pci 0000:07:09.3: PME# supported from D0 D1 D2 D3hot D3cold
  310. [ 0.183743] pci 0000:07:09.3: PME# disabled
  311. [ 0.183790] pci 0000:07:09.4: reg 10 32bit mmio: [0xf8101400-0xf81014ff]
  312. [ 0.183857] pci 0000:07:09.4: supports D1 D2
  313. [ 0.183860] pci 0000:07:09.4: PME# supported from D0 D1 D2 D3hot D3cold
  314. [ 0.183866] pci 0000:07:09.4: PME# disabled
  315. [ 0.183929] pci 0000:00:1e.0: transparent bridge
  316. [ 0.183938] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xf81fffff]
  317. [ 0.183978] pci_bus 0000:00: on NUMA node 0
  318. [ 0.183983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  319. [ 0.184215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
  320. [ 0.184311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  321. [ 0.184398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  322. [ 0.184477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
  323. [ 0.184586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  324. [ 0.194284] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
  325. [ 0.194394] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  326. [ 0.194502] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
  327. [ 0.194611] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  328. [ 0.194718] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  329. [ 0.194825] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  330. [ 0.194930] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  331. [ 0.195036] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  332. [ 0.195145] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  333. [ 0.195152] vgaarb: loaded
  334. [ 0.195166] PCI: Using ACPI for IRQ routing
  335. [ 0.195166] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  336. [ 0.195166] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  337. [ 0.200021] Switching to clocksource tsc
  338. [ 0.201381] pnp: PnP ACPI init
  339. [ 0.201390] ACPI: bus type pnp registered
  340. [ 0.204114] pnp: PnP ACPI: found 11 devices
  341. [ 0.204116] ACPI: ACPI bus type pnp unregistered
  342. [ 0.204120] PnPBIOS: Disabled by ACPI PNP
  343. [ 0.204129] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
  344. [ 0.204133] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
  345. [ 0.204136] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
  346. [ 0.204140] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
  347. [ 0.204143] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
  348. [ 0.204147] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
  349. [ 0.204150] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
  350. [ 0.204154] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
  351. [ 0.204161] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
  352. [ 0.204170] system 00:06: ioport range 0x380-0x383 has been reserved
  353. [ 0.204173] system 00:06: ioport range 0x680-0x69f has been reserved
  354. [ 0.204176] system 00:06: ioport range 0x800-0x80f has been reserved
  355. [ 0.204180] system 00:06: ioport range 0x1000-0x107f has been reserved
  356. [ 0.204183] system 00:06: ioport range 0x1180-0x11bf has been reserved
  357. [ 0.204186] system 00:06: ioport range 0x1640-0x164f has been reserved
  358. [ 0.204190] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
  359. [ 0.204196] system 00:07: ioport range 0x6a0-0x6af has been reserved
  360. [ 0.204199] system 00:07: ioport range 0x6b0-0x6ff has been reserved
  361. [ 0.238962] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
  362. [ 0.238965] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  363. [ 0.238969] pci 0000:00:01.0: IO window: 0x2000-0x2fff
  364. [ 0.238973] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
  365. [ 0.238978] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
  366. [ 0.238984] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
  367. [ 0.238988] pci 0000:00:1c.0: IO window: 0x4000-0x7fff
  368. [ 0.238995] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
  369. [ 0.239001] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
  370. [ 0.239010] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
  371. [ 0.239014] pci 0000:00:1c.1: IO window: 0x8000-0xbfff
  372. [ 0.239022] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
  373. [ 0.239027] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
  374. [ 0.239037] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
  375. [ 0.239041] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
  376. [ 0.239048] pci 0000:00:1c.5: MEM window: 0xf8000000-0xf80fffff
  377. [ 0.239054] pci 0000:00:1c.5: PREFETCH window: 0xc0000000-0xc01fffff
  378. [ 0.239064] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
  379. [ 0.239066] pci 0000:00:1e.0: IO window: disabled
  380. [ 0.239073] pci 0000:00:1e.0: MEM window: 0xf8100000-0xf81fffff
  381. [ 0.239078] pci 0000:00:1e.0: PREFETCH window: disabled
  382. [ 0.239096] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  383. [ 0.239100] pci 0000:00:01.0: setting latency timer to 64
  384. [ 0.239112] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  385. [ 0.239118] pci 0000:00:1c.0: setting latency timer to 64
  386. [ 0.239129] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  387. [ 0.239135] pci 0000:00:1c.1: setting latency timer to 64
  388. [ 0.239147] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  389. [ 0.239152] pci 0000:00:1c.5: setting latency timer to 64
  390. [ 0.239161] pci 0000:00:1e.0: setting latency timer to 64
  391. [ 0.239166] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  392. [ 0.239169] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  393. [ 0.239172] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
  394. [ 0.239175] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
  395. [ 0.239178] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
  396. [ 0.239181] pci_bus 0000:02: resource 0 io: [0x4000-0x7fff]
  397. [ 0.239183] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
  398. [ 0.239186] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
  399. [ 0.239189] pci_bus 0000:04: resource 0 io: [0x8000-0xbfff]
  400. [ 0.239192] pci_bus 0000:04: resource 1 mem: [0xf6000000-0xf7ffffff]
  401. [ 0.239195] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
  402. [ 0.239198] pci_bus 0000:06: resource 0 io: [0xc000-0xcfff]
  403. [ 0.239201] pci_bus 0000:06: resource 1 mem: [0xf8000000-0xf80fffff]
  404. [ 0.239203] pci_bus 0000:06: resource 2 pref mem [0xc0000000-0xc01fffff]
  405. [ 0.239206] pci_bus 0000:07: resource 1 mem: [0xf8100000-0xf81fffff]
  406. [ 0.239209] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
  407. [ 0.239212] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
  408. [ 0.239239] NET: Registered protocol family 2
  409. [ 0.239319] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  410. [ 0.239616] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  411. [ 0.240042] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  412. [ 0.240262] TCP: Hash tables configured (established 131072 bind 65536)
  413. [ 0.240265] TCP reno registered
  414. [ 0.240335] NET: Registered protocol family 1
  415. [ 0.240508] pci 0000:01:00.0: Boot video device
  416. [ 0.240567] Unpacking initramfs...
  417. [ 0.529277] Freeing initrd memory: 9423k freed
  418. [ 0.534695] Simple Boot Flag at 0x35 set to 0x1
  419. [ 0.535025] audit: initializing netlink socket (disabled)
  420. [ 0.535039] type=2000 audit(1298683100.531:1): initialized
  421. [ 0.538815] highmem bounce pool size: 64 pages
  422. [ 0.538820] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  423. [ 0.540276] VFS: Disk quotas dquot_6.5.2
  424. [ 0.540336] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  425. [ 0.540414] msgmni has been set to 1707
  426. [ 0.540614] alg: No test for stdrng (krng)
  427. [ 0.540663] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  428. [ 0.540667] io scheduler noop registered
  429. [ 0.540669] io scheduler anticipatory registered
  430. [ 0.540671] io scheduler deadline registered
  431. [ 0.540706] io scheduler cfq registered (default)
  432. [ 0.540848] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
  433. [ 0.540856] pcieport 0000:00:01.0: setting latency timer to 64
  434. [ 0.541002] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
  435. [ 0.541014] pcieport 0000:00:1c.0: setting latency timer to 64
  436. [ 0.541184] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
  437. [ 0.541196] pcieport 0000:00:1c.1: setting latency timer to 64
  438. [ 0.541368] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
  439. [ 0.541380] pcieport 0000:00:1c.5: setting latency timer to 64
  440. [ 0.541577] isapnp: Scanning for PnP cards...
  441. [ 0.896066] isapnp: No Plug & Play device found
  442. [ 0.897470] Linux agpgart interface v0.103
  443. [ 0.897622] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  444. [ 0.898036] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  445. [ 0.918790] serio: i8042 KBD port at 0x60,0x64 irq 1
  446. [ 0.918796] serio: i8042 AUX port at 0x60,0x64 irq 12
  447. [ 0.918849] mice: PS/2 mouse device common for all mice
  448. [ 0.918901] rtc_cmos 00:08: RTC can wake from S4
  449. [ 0.918932] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
  450. [ 0.918967] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  451. [ 0.918978] cpuidle: using governor ladder
  452. [ 0.918980] cpuidle: using governor menu
  453. [ 0.918984] No iBFT detected.
  454. [ 0.919324] TCP cubic registered
  455. [ 0.919472] NET: Registered protocol family 10
  456. [ 0.919929] lo: Disabled Privacy Extensions
  457. [ 0.920253] Mobile IPv6
  458. [ 0.920256] NET: Registered protocol family 17
  459. [ 0.920269] Using IPI No-Shortcut mode
  460. [ 0.920329] PM: Resume from disk failed.
  461. [ 0.920338] registered taskstats version 1
  462. [ 0.921009] rtc_cmos 00:08: setting system clock to 2011-02-26 01:18:21 UTC (1298683101)
  463. [ 0.921052] Initalizing network drop monitor service
  464. [ 0.921076] Freeing unused kernel memory: 376k freed
  465. [ 0.921276] Write protecting the kernel text: 2504k
  466. [ 0.921300] Write protecting the kernel read-only data: 920k
  467. [ 0.950469] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  468. [ 0.993925] udev[59]: starting version 164
  469. [ 1.130757] usbcore: registered new interface driver usbfs
  470. [ 1.130812] usbcore: registered new interface driver hub
  471. [ 1.130870] usbcore: registered new device driver usb
  472. [ 1.143877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  473. [ 1.143917] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  474. [ 1.145134] SCSI subsystem initialized
  475. [ 1.145892] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  476. [ 1.145897] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  477. [ 1.145916] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  478. [ 1.145947] ehci_hcd 0000:00:1a.7: debug port 1
  479. [ 1.149830] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  480. [ 1.150023] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
  481. [ 1.154362] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386)
  482. [ 1.165065] libata version 3.00 loaded.
  483. [ 1.165251] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  484. [ 1.165275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  485. [ 1.165278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  486. [ 1.165281] usb usb1: Product: EHCI Host Controller
  487. [ 1.165283] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
  488. [ 1.165286] usb usb1: SerialNumber: 0000:00:1a.7
  489. [ 1.165365] usb usb1: configuration #1 chosen from 1 choice
  490. [ 1.165400] hub 1-0:1.0: USB hub found
  491. [ 1.165407] hub 1-0:1.0: 4 ports detected
  492. [ 1.165477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  493. [ 1.165494] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  494. [ 1.165498] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  495. [ 1.165506] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  496. [ 1.165536] ehci_hcd 0000:00:1d.7: debug port 1
  497. [ 1.169425] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  498. [ 1.169454] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
  499. [ 1.170972] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  500. [ 1.170996] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  501. [ 1.171051] r8169 0000:06:00.0: setting latency timer to 64
  502. [ 1.171162] r8169 0000:06:00.0: irq 28 for MSI/MSI-X
  503. [ 1.171801] eth0: RTL8168b/8111b at 0xf7e0e000, 00:1e:68:6b:c1:05, XID 18000000 IRQ 28
  504. [ 1.185658] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  505. [ 1.185680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  506. [ 1.185683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  507. [ 1.185686] usb usb2: Product: EHCI Host Controller
  508. [ 1.185689] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
  509. [ 1.185691] usb usb2: SerialNumber: 0000:00:1d.7
  510. [ 1.185808] usb usb2: configuration #1 chosen from 1 choice
  511. [ 1.185878] hub 2-0:1.0: USB hub found
  512. [ 1.185887] hub 2-0:1.0: 6 ports detected
  513. [ 1.185948] ricoh-mmc: Ricoh MMC Controller disabling driver
  514. [ 1.185951] ricoh-mmc: Copyright(c) Philip Langdale
  515. [ 1.185970] ricoh-mmc: Ricoh MMC controller found at 0000:07:09.2 [1180:0843] (rev 12)
  516. [ 1.185988] ricoh-mmc: Controller is now disabled.
  517. [ 1.188183] uhci_hcd: USB Universal Host Controller Interface driver
  518. [ 1.190143] ata_piix 0000:00:1f.1: version 2.13
  519. [ 1.190163] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  520. [ 1.190204] ata_piix 0000:00:1f.1: setting latency timer to 64
  521. [ 1.192276] scsi0 : ata_piix
  522. [ 1.192422] scsi1 : ata_piix
  523. [ 1.193085] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
  524. [ 1.193089] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
  525. [ 1.193227] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  526. [ 1.193235] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  527. [ 1.193239] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  528. [ 1.193250] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  529. [ 1.193291] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
  530. [ 1.193331] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  531. [ 1.193334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  532. [ 1.193337] usb usb3: Product: UHCI Host Controller
  533. [ 1.193339] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  534. [ 1.193341] usb usb3: SerialNumber: 0000:00:1a.0
  535. [ 1.193420] usb usb3: configuration #1 chosen from 1 choice
  536. [ 1.193451] hub 3-0:1.0: USB hub found
  537. [ 1.193458] hub 3-0:1.0: 2 ports detected
  538. [ 1.193526] ahci 0000:00:1f.2: version 3.0
  539. [ 1.193539] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  540. [ 1.193589] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
  541. [ 1.193662] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
  542. [ 1.193667] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
  543. [ 1.193673] ahci 0000:00:1f.2: setting latency timer to 64
  544. [ 1.193844] firewire_ohci 0000:07:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  545. [ 1.194211] scsi2 : ahci
  546. [ 1.194465] scsi3 : ahci
  547. [ 1.194683] scsi4 : ahci
  548. [ 1.194820] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 29
  549. [ 1.194824] ata4: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 29
  550. [ 1.194828] ata5: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 29
  551. [ 1.194964] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  552. [ 1.194971] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  553. [ 1.194975] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  554. [ 1.194988] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  555. [ 1.195027] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
  556. [ 1.195069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  557. [ 1.195072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  558. [ 1.195074] usb usb4: Product: UHCI Host Controller
  559. [ 1.195077] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  560. [ 1.195079] usb usb4: SerialNumber: 0000:00:1a.1
  561. [ 1.195151] usb usb4: configuration #1 chosen from 1 choice
  562. [ 1.195181] hub 4-0:1.0: USB hub found
  563. [ 1.195189] hub 4-0:1.0: 2 ports detected
  564. [ 1.195244] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  565. [ 1.195251] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  566. [ 1.195255] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  567. [ 1.195262] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
  568. [ 1.195292] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
  569. [ 1.195328] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  570. [ 1.195332] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  571. [ 1.195334] usb usb5: Product: UHCI Host Controller
  572. [ 1.195337] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  573. [ 1.195339] usb usb5: SerialNumber: 0000:00:1d.0
  574. [ 1.195400] usb usb5: configuration #1 chosen from 1 choice
  575. [ 1.195428] hub 5-0:1.0: USB hub found
  576. [ 1.195434] hub 5-0:1.0: 2 ports detected
  577. [ 1.195484] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  578. [ 1.195491] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  579. [ 1.195495] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  580. [ 1.195502] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
  581. [ 1.195539] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
  582. [ 1.195561] sdhci: Secure Digital Host Controller Interface driver
  583. [ 1.195564] sdhci: Copyright(c) Pierre Ossman
  584. [ 1.195574] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  585. [ 1.195577] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  586. [ 1.195580] usb usb6: Product: UHCI Host Controller
  587. [ 1.195582] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  588. [ 1.195584] usb usb6: SerialNumber: 0000:00:1d.1
  589. [ 1.195649] usb usb6: configuration #1 chosen from 1 choice
  590. [ 1.195683] hub 6-0:1.0: USB hub found
  591. [ 1.195690] hub 6-0:1.0: 2 ports detected
  592. [ 1.195741] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  593. [ 1.195749] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  594. [ 1.195753] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  595. [ 1.195764] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
  596. [ 1.195793] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
  597. [ 1.195828] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  598. [ 1.195831] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  599. [ 1.195834] usb usb7: Product: UHCI Host Controller
  600. [ 1.195836] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
  601. [ 1.195838] usb usb7: SerialNumber: 0000:00:1d.2
  602. [ 1.195902] usb usb7: configuration #1 chosen from 1 choice
  603. [ 1.195931] hub 7-0:1.0: USB hub found
  604. [ 1.195939] hub 7-0:1.0: 2 ports detected
  605. [ 1.276032] firewire_ohci: Added fw-ohci device 0000:07:09.0, OHCI version 1.10
  606. [ 1.359747] ata1.00: ATAPI: Optiarc DVD RW AD-7561A, GH09, max MWDMA2
  607. [ 1.372262] ata1.00: configured for MWDMA2
  608. [ 1.373563] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7561A GH09 PQ: 0 ANSI: 5
  609. [ 1.496009] usb 2-4: new high speed USB device using ehci_hcd and address 2
  610. [ 1.516027] ata5: SATA link down (SStatus 0 SControl 300)
  611. [ 1.516031] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  612. [ 1.516056] ata4: SATA link down (SStatus 0 SControl 300)
  613. [ 1.516641] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  614. [ 1.516691] ata3.00: ATA-8: TOSHIBA MK3252GSX, LV011C, max UDMA/100
  615. [ 1.516694] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  616. [ 1.517327] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  617. [ 1.517396] ata3.00: configured for UDMA/100
  618. [ 1.532096] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
  619. [ 1.534259] sdhci-pci 0000:07:09.1: SDHCI controller found [1180:0822] (rev 22)
  620. [ 1.534278] sdhci-pci 0000:07:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  621. [ 1.537772] Registered led device: mmc0::
  622. [ 1.538830] mmc0: SDHCI controller on PCI [0000:07:09.1] using PIO
  623. [ 1.550099] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  624. [ 1.550103] Uniform CD-ROM driver Revision: 3.20
  625. [ 1.550195] sr 0:0:0:0: Attached scsi CD-ROM sr0
  626. [ 1.550784] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  627. [ 1.550840] sd 2:0:0:0: [sda] Write Protect is off
  628. [ 1.550843] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  629. [ 1.550867] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  630. [ 1.550995] sda:
  631. [ 1.554927] sr 0:0:0:0: Attached scsi generic sg0 type 5
  632. [ 1.555358] sd 2:0:0:0: Attached scsi generic sg1 type 0
  633. [ 1.651864] sda1 sda2 sda3 sda4
  634. [ 1.684371] sd 2:0:0:0: [sda] Attached SCSI disk
  635. [ 1.731712] usb 2-4: New USB device found, idVendor=0c45, idProduct=62c0
  636. [ 1.731716] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  637. [ 1.731720] usb 2-4: Product: HP Webcam
  638. [ 1.731722] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd.
  639. [ 1.731724] usb 2-4: SerialNumber: SN0001
  640. [ 1.731810] usb 2-4: configuration #1 chosen from 1 choice
  641. [ 1.772072] firewire_core: created device fw0: GUID 00241b00c764f600, S400
  642. [ 2.329419] PM: Starting manual resume from disk
  643. [ 2.329424] PM: Resume from partition 8:4
  644. [ 2.329425] PM: Checking hibernation image.
  645. [ 2.329580] PM: Error -22 checking image file
  646. [ 2.329582] PM: Resume from disk failed.
  647. [ 2.335017] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  648. [ 2.335023] PM: Basic memory bitmaps created
  649. [ 2.362694] PM: Basic memory bitmaps freed
  650. [ 2.438752] EXT4-fs (sda3): mounted filesystem with ordered data mode
  651. [ 4.325284] udev[441]: starting version 164
  652. [ 4.691429] ACPI: WMI: Mapper loaded
  653. [ 4.772816] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
  654. [ 4.772831] ACPI: Power Button [PWRB]
  655. [ 4.772889] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
  656. [ 4.772893] ACPI: Sleep Button [SLPB]
  657. [ 4.772948] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
  658. [ 4.777339] ACPI: Lid Switch [LID]
  659. [ 4.777597] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
  660. [ 4.777604] ACPI: Power Button [PWRF]
  661. [ 4.778766] ACPI: AC Adapter [ACAD] (on-line)
  662. [ 4.779822] ACPI: SSDT bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
  663. [ 4.780479] ACPI: SSDT bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
  664. [ 4.784476] Monitor-Mwait will be used to enter C-1 state
  665. [ 4.784509] Monitor-Mwait will be used to enter C-2 state
  666. [ 4.784530] Monitor-Mwait will be used to enter C-3 state
  667. [ 4.784537] Marking TSC unstable due to TSC halts in idle
  668. [ 4.784823] Switching to clocksource hpet
  669. [ 4.785186] processor LNXCPU:00: registered as cooling_device0
  670. [ 4.785753] ACPI: SSDT bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
  671. [ 4.786077] ACPI: SSDT bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
  672. [ 4.787057] processor LNXCPU:01: registered as cooling_device1
  673. [ 4.860113] ACPI: Battery Slot [BAT0] (battery present)
  674. [ 6.226238] nvidia: module license 'NVIDIA' taints kernel.
  675. [ 6.226242] Disabling lock debugging due to kernel taint
  676. [ 7.204348] input: PC Speaker as /devices/platform/pcspkr/input/input5
  677. [ 7.212240] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
  678. [ 7.212246] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
  679. [ 7.212327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  680. [ 7.220960] acpi device:04: registered as cooling_device2
  681. [ 7.221332] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
  682. [ 7.221416] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
  683. [ 7.319270] Linux video capture interface: v2.00
  684. [ 7.319768] cfg80211: Using static regulatory domain info
  685. [ 7.319771] cfg80211: Regulatory domain: US
  686. [ 7.319773] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  687. [ 7.319777] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  688. [ 7.319780] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  689. [ 7.319783] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  690. [ 7.319786] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  691. [ 7.319795] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  692. [ 7.319798] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  693. [ 7.320134] cfg80211: Calling CRDA for country: US
  694. [ 7.410927] uvcvideo: Found UVC 1.00 device HP Webcam (0c45:62c0)
  695. [ 7.415549] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
  696. [ 7.415652] usbcore: registered new interface driver uvcvideo
  697. [ 7.415871] USB Video Class driver (v0.1.0)
  698. [ 7.452716] nvidia 0000:01:00.0: power state changed by ACPI to D0
  699. [ 7.452734] nvidia 0000:01:00.0: power state changed by ACPI to D0
  700. [ 7.452745] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  701. [ 7.452754] nvidia 0000:01:00.0: setting latency timer to 64
  702. [ 7.452766] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  703. [ 7.453323] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.29 Wed Dec 8 12:09:09 PST 2010
  704. [ 7.745548] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
  705. [ 7.745552] iwl3945: Copyright(c) 2003-2009 Intel Corporation
  706. [ 7.745652] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  707. [ 7.745674] iwl3945 0000:02:00.0: setting latency timer to 64
  708. [ 7.814890] iwl3945 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
  709. [ 7.814894] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
  710. [ 7.815071] iwl3945 0000:02:00.0: irq 30 for MSI/MSI-X
  711. [ 8.066447] phy0: Selected rate control algorithm 'iwl-3945-rs'
  712. [ 8.229033] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  713. [ 8.229088] HDA Intel 0000:00:1b.0: setting latency timer to 64
  714. [ 8.349458] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
  715. [ 8.475263] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
  716. [ 8.581069] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
  717. [ 9.323687] Adding 3397736k swap on /dev/sda4. Priority:-1 extents:1 across:3397736k
  718. [ 9.710982] loop: module loaded
  719. [ 10.337536] fuse init (API version 7.13)
  720. [ 13.676820] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
  721. [ 16.030270] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode
  722. [ 16.085283] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
  723. [ 16.166779] Registered led device: iwl-phy0::radio
  724. [ 16.166876] Registered led device: iwl-phy0::assoc
  725. [ 16.166913] Registered led device: iwl-phy0::RX
  726. [ 16.166931] Registered led device: iwl-phy0::TX
  727. [ 16.177976] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  728. [ 16.179947] r8169: eth0: link down
  729. [ 16.180236] ADDRCONF(NETDEV_UP): eth0: link is not ready
  730. [ 16.754752] apm: BIOS not found.
  731. [ 20.130557] Bluetooth: Core ver 2.15
  732. [ 20.130622] NET: Registered protocol family 31
  733. [ 20.130624] Bluetooth: HCI device and connection manager initialized
  734. [ 20.130626] Bluetooth: HCI socket layer initialized
  735. [ 20.296218] Bluetooth: L2CAP ver 2.14
  736. [ 20.296221] Bluetooth: L2CAP socket layer initialized
  737. [ 20.318997] Bluetooth: RFCOMM TTY layer initialized
  738. [ 20.319005] Bluetooth: RFCOMM socket layer initialized
  739. [ 20.319007] Bluetooth: RFCOMM ver 1.11
  740. [ 20.405173] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  741. [ 20.405176] Bluetooth: BNEP filters: protocol multicast
  742. [ 20.460758] Bridge firewalling registered
  743. [ 20.931304] Bluetooth: SCO (Voice Link) ver 0.6
  744. [ 20.931313] Bluetooth: SCO socket layer initialized
  745. [ 22.371896] lp: driver loaded but no devices found
  746. [ 22.574178] ppdev: user-space parallel port driver
  747. [ 29.124045] vboxdrv: Trying to deactivate the NMI watchdog permanently...
  748. [ 29.124051] vboxdrv: Successfully done.
  749. [ 29.124061] vboxdrv: Found 2 processor cores.
  750. [ 29.124211] vboxdrv: fAsync=0 offMin=0x323 offMax=0xb21
  751. [ 29.124308] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
  752. [ 29.124319] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
  753. [ 89.333900] wlan0: direct probe to AP 00:1e:2a:79:dc:78 (try 1)
  754. [ 89.336134] wlan0: direct probe responded
  755. [ 89.336139] wlan0: authenticate with AP 00:1e:2a:79:dc:78 (try 1)
  756. [ 89.338146] wlan0: authenticated
  757. [ 89.338195] wlan0: associate with AP 00:1e:2a:79:dc:78 (try 1)
  758. [ 89.341936] wlan0: RX AssocResp from 00:1e:2a:79:dc:78 (capab=0x411 status=0 aid=1)
  759. [ 89.341955] wlan0: associated
  760. [ 89.343890] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  761. [ 99.896068] wlan0: no IPv6 routers present
  762. [ 135.429068] CE: hpet increasing min_delta_ns to 15000 nsec
  763. [ 1379.060162] wlan0: deauthenticating from 00:1e:2a:79:dc:78 by local choice (reason=3)
  764. [ 1379.942833] Registered led device: iwl-phy0::radio
  765. [ 1379.943445] Registered led device: iwl-phy0::assoc
  766. [ 1379.943562] Registered led device: iwl-phy0::RX
  767. [ 1379.943905] Registered led device: iwl-phy0::TX
  768. [ 1379.956804] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  769. [ 1379.958219] r8169: eth0: link down
  770. [ 1379.958427] ADDRCONF(NETDEV_UP): eth0: link is not ready
  771. [ 1383.257897] wlan0: direct probe to AP 00:1e:2a:79:dc:78 (try 1)
  772. [ 1383.260086] wlan0: direct probe responded
  773. [ 1383.260094] wlan0: authenticate with AP 00:1e:2a:79:dc:78 (try 1)
  774. [ 1383.262032] wlan0: authenticated
  775. [ 1383.262080] wlan0: associate with AP 00:1e:2a:79:dc:78 (try 1)
  776. [ 1383.264446] wlan0: RX AssocResp from 00:1e:2a:79:dc:78 (capab=0x411 status=0 aid=1)
  777. [ 1383.264452] wlan0: associated
  778. [ 1383.266060] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  779. [ 1393.396125] wlan0: no IPv6 routers present
  780. [ 1745.302473] s2ram[3469]: segfault at 46 ip b76c6cfd sp bf9807bc error 4 in libc-2.11.2.so[b768a000+140000]
  781. [ 1801.665057] wlan0: deauthenticating from 00:1e:2a:79:dc:78 by local choice (reason=3)
  782. [ 1805.276156] PM: Syncing filesystems ... done.
  783. [ 1805.541641] PM: Preparing system for mem sleep
  784. [ 1805.548127] Freezing user space processes ... (elapsed 0.00 seconds) done.
  785. [ 1805.548804] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  786. [ 1805.548840] PM: Entering mem sleep
  787. [ 1805.548853] Suspending console(s) (use no_console_suspend to debug)
  788. [ 1805.596529] sd 2:0:0:0: [sda] Synchronizing SCSI cache
  789. [ 1805.599061] sd 2:0:0:0: [sda] Stopping disk
  790. [ 1806.668739] ACPI handle has no context!
  791. [ 1806.669813] ACPI handle has no context!
  792. [ 1806.669821] sdhci-pci 0000:07:09.1: PCI INT B disabled
  793. [ 1806.669827] ACPI handle has no context!
  794. [ 1807.778098] pci 0000:00:1f.3: PCI INT C disabled
  795. [ 1807.840687] ata_piix 0000:00:1f.1: PCI INT A disabled
  796. [ 1807.840703] ehci_hcd 0000:00:1d.7: PCI INT A disabled
  797. [ 1807.840721] uhci_hcd 0000:00:1d.2: PCI INT C disabled
  798. [ 1807.840729] uhci_hcd 0000:00:1d.1: PCI INT B disabled
  799. [ 1807.840738] uhci_hcd 0000:00:1d.0: PCI INT A disabled
  800. [ 1808.048556] HDA Intel 0000:00:1b.0: PCI INT A disabled
  801. [ 1808.064491] ehci_hcd 0000:00:1a.7: PCI INT C disabled
  802. [ 1808.064503] uhci_hcd 0000:00:1a.1: PCI INT B disabled
  803. [ 1808.064515] uhci_hcd 0000:00:1a.0: PCI INT A disabled
  804. [ 1808.064911] ricoh-mmc: Suspending.
  805. [ 1808.064920] ricoh-mmc: Controller is now re-enabled.
  806. [ 1808.065068] r8169 0000:06:00.0: PME# enabled
  807. [ 1808.065136] r8169 0000:06:00.0: wake-up capability enabled by ACPI
  808. [ 1808.112411] ACPI: Preparing to enter system sleep state S3
  809. [ 1808.120276] Disabling non-boot CPUs ...
  810. [ 1808.120298] CPU0 attaching NULL sched-domain.
  811. [ 1808.120301] CPU1 attaching NULL sched-domain.
  812. [ 1808.168019] CPU0 attaching NULL sched-domain.
  813. [ 1808.272025] CPU 1 is now offline
  814. [ 1808.272027] SMP alternatives: switching to UP code
  815. [ 1808.277469] Extended CMOS year: 2000
  816. [ 1808.277469] Back to C!
  817. [ 1808.277469] CPU0: Thermal monitoring enabled (TM2)
  818. [ 1808.277469] Extended CMOS year: 2000
  819. [ 1808.277469] Enabling non-boot CPUs ...
  820. [ 1808.277469] SMP alternatives: switching to SMP code
  821. [ 1808.282623] Booting processor 1 APIC 0x1 ip 0x6000
  822. [ 1808.277391] Initializing CPU#1
  823. [ 1808.277391] CPU: L1 I cache: 32K, L1 D cache: 32K
  824. [ 1808.277391] CPU: L2 cache: 2048K
  825. [ 1808.277391] CPU: Physical Processor ID: 0
  826. [ 1808.277391] CPU: Processor Core ID: 1
  827. [ 1808.277391] CPU1: Thermal monitoring enabled (TM2)
  828. [ 1808.372090] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
  829. [ 1808.372140] CPU0 attaching NULL sched-domain.
  830. [ 1808.400016] CPU0 attaching sched-domain:
  831. [ 1808.400019] domain 0: span 0-1 level MC
  832. [ 1808.400021] groups: 0 1
  833. [ 1808.400026] CPU1 attaching sched-domain:
  834. [ 1808.400028] domain 0: span 0-1 level MC
  835. [ 1808.400030] groups: 1 0
  836. [ 1808.400464] CPU1 is up
  837. [ 1808.400857] ACPI: Waking up from system sleep state S3
  838. [ 1808.416215] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
  839. [ 1808.416261] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  840. [ 1808.416295] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  841. [ 1808.416340] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
  842. [ 1808.416394] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  843. [ 1808.416402] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
  844. [ 1808.416437] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
  845. [ 1808.416454] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20007040, writing 0x7040)
  846. [ 1808.416465] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  847. [ 1808.416473] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  848. [ 1808.416525] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
  849. [ 1808.416539] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
  850. [ 1808.416545] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600)
  851. [ 1808.416551] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0xb080)
  852. [ 1808.416562] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  853. [ 1808.416570] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
  854. [ 1808.416623] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
  855. [ 1808.416637] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xc011c001)
  856. [ 1808.416643] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf800f800)
  857. [ 1808.416649] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0xc0c0)
  858. [ 1808.416660] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  859. [ 1808.416668] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
  860. [ 1808.416730] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  861. [ 1808.416764] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  862. [ 1808.416798] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  863. [ 1808.416842] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
  864. [ 1808.416876] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
  865. [ 1808.416882] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf810f810)
  866. [ 1808.416888] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x62800000, writing 0x628000f0)
  867. [ 1808.416902] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
  868. [ 1808.416969] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
  869. [ 1808.416996] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
  870. [ 1808.417023] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
  871. [ 1808.417050] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
  872. [ 1808.417105] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0200000)
  873. [ 1808.417181] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x2001)
  874. [ 1808.417189] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xcc000004)
  875. [ 1808.417198] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
  876. [ 1808.417204] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xce000000)
  877. [ 1808.417214] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
  878. [ 1808.417315] iwl3945 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
  879. [ 1808.417384] iwl3945 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf4000000)
  880. [ 1808.417398] iwl3945 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  881. [ 1808.417417] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
  882. [ 1808.417565] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
  883. [ 1808.417591] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8000004)
  884. [ 1808.417602] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xc001)
  885. [ 1808.417609] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  886. [ 1808.417619] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507)
  887. [ 1808.417810] ricoh-mmc: Resuming.
  888. [ 1808.417819] ricoh-mmc: Controller is now disabled.
  889. [ 1808.417832] pci 0000:07:09.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
  890. [ 1808.417856] pci 0000:07:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xf8101400)
  891. [ 1808.417862] pci 0000:07:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
  892. [ 1808.417870] pci 0000:07:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
  893. [ 1808.432019] pci 0000:07:09.4: Refused to change power state, currently in D3
  894. [ 1808.728961] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  895. [ 1808.728969] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  896. [ 1808.728996] usb usb3: root hub lost power or was reset
  897. [ 1808.729017] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  898. [ 1808.729024] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  899. [ 1808.729051] usb usb4: root hub lost power or was reset
  900. [ 1808.729072] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  901. [ 1808.729079] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  902. [ 1808.729091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  903. [ 1808.729098] HDA Intel 0000:00:1b.0: setting latency timer to 64
  904. [ 1808.729129] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  905. [ 1808.729136] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  906. [ 1808.729162] usb usb5: root hub lost power or was reset
  907. [ 1808.729182] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  908. [ 1808.729189] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  909. [ 1808.729215] usb usb6: root hub lost power or was reset
  910. [ 1808.729235] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  911. [ 1808.729242] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  912. [ 1808.729268] usb usb7: root hub lost power or was reset
  913. [ 1808.729289] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  914. [ 1808.729296] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  915. [ 1808.729308] pci 0000:00:1e.0: setting latency timer to 64
  916. [ 1808.729318] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  917. [ 1808.729324] ata_piix 0000:00:1f.1: setting latency timer to 64
  918. [ 1808.729346] ahci 0000:00:1f.2: setting latency timer to 64
  919. [ 1808.729431] pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
  920. [ 1808.921828] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
  921. [ 1808.921832] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
  922. [ 1808.953392] ata1.00: configured for MWDMA2
  923. [ 1809.049159] ata5: SATA link down (SStatus 0 SControl 300)
  924. [ 1809.049305] ata4: SATA link down (SStatus 0 SControl 300)
  925. [ 1809.446039] r8169 0000:06:00.0: wake-up capability disabled by ACPI
  926. [ 1809.446047] r8169 0000:06:00.0: PME# disabled
  927. [ 1809.524502] sdhci-pci 0000:07:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  928. [ 1809.524520] firewire_core: skipped bus generations, destroying all nodes
  929. [ 1809.588536] sd 2:0:0:0: [sda] Starting disk
  930. [ 1810.024500] firewire_core: rediscovered device fw0
  931. [ 1810.281520] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  932. [ 1810.282457] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  933. [ 1810.283579] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  934. [ 1810.283702] ata3.00: configured for UDMA/100
  935. [ 1810.355332] PM: Finishing wakeup.
  936. [ 1810.355334] Restarting tasks ... done.
  937. [ 1810.546149] Registered led device: iwl-phy0::radio
  938. [ 1810.546469] Registered led device: iwl-phy0::assoc
  939. [ 1810.547777] Registered led device: iwl-phy0::RX
  940. [ 1810.548545] Registered led device: iwl-phy0::TX
  941. [ 1810.560849] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  942. [ 1810.562204] r8169: eth0: link down
  943. [ 1810.562405] ADDRCONF(NETDEV_UP): eth0: link is not ready
  944. [ 1814.234519] wlan0: direct probe to AP 00:1e:2a:79:dc:78 (try 1)
  945. [ 1814.236682] wlan0: direct probe responded
  946. [ 1814.236687] wlan0: authenticate with AP 00:1e:2a:79:dc:78 (try 1)
  947. [ 1814.238458] wlan0: authenticated
  948. [ 1814.238479] wlan0: associate with AP 00:1e:2a:79:dc:78 (try 1)
  949. [ 1814.240867] wlan0: RX AssocResp from 00:1e:2a:79:dc:78 (capab=0x411 status=0 aid=1)
  950. [ 1814.240871] wlan0: associated
  951. [ 1814.242250] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  952. [ 1824.744161] wlan0: no IPv6 routers present
  953. [ 2132.389200] wlan0: deauthenticating from 00:1e:2a:79:dc:78 by local choice (reason=3)
  954. [ 2133.299740] Registered led device: iwl-phy0::radio
  955. [ 2133.300177] Registered led device: iwl-phy0::assoc
  956. [ 2133.300686] Registered led device: iwl-phy0::RX
  957. [ 2133.301050] Registered led device: iwl-phy0::TX
  958. [ 2133.312863] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  959. [ 2133.314280] r8169: eth0: link down
  960. [ 2133.314488] ADDRCONF(NETDEV_UP): eth0: link is not ready
  961. [ 2136.625114] wlan0: direct probe to AP 00:1e:2a:79:dc:78 (try 1)
  962. [ 2136.627269] wlan0: direct probe responded
  963. [ 2136.627273] wlan0: authenticate with AP 00:1e:2a:79:dc:78 (try 1)
  964. [ 2136.629110] wlan0: authenticated
  965. [ 2136.629131] wlan0: associate with AP 00:1e:2a:79:dc:78 (try 1)
  966. [ 2136.631467] wlan0: RX AssocResp from 00:1e:2a:79:dc:78 (capab=0x411 status=0 aid=1)
  967. [ 2136.631471] wlan0: associated
  968. [ 2136.632903] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  969. [ 2146.640162] wlan0: no IPv6 routers present
  970. [ 2193.012095] CE: hpet increasing min_delta_ns to 22500 nsec
  971. [ 2307.481199] wlan0: deauthenticating from 00:1e:2a:79:dc:78 by local choice (reason=3)
  972. [ 2309.396059] CE: hpet increasing min_delta_ns to 33750 nsec
  973. [ 2310.337859] PM: Syncing filesystems ... done.
  974. [ 2310.369788] PM: Preparing system for mem sleep
  975. [ 2310.369804] Freezing user space processes ... (elapsed 0.00 seconds) done.
  976. [ 2310.370587] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  977. [ 2310.370632] PM: Entering mem sleep
  978. [ 2310.370645] Suspending console(s) (use no_console_suspend to debug)
  979. [ 2310.416065] sd 2:0:0:0: [sda] Synchronizing SCSI cache
  980. [ 2310.416169] sd 2:0:0:0: [sda] Stopping disk
  981. [ 2311.488612] ACPI handle has no context!
  982. [ 2311.489689] ACPI handle has no context!
  983. [ 2311.489697] sdhci-pci 0000:07:09.1: PCI INT B disabled
  984. [ 2311.489704] ACPI handle has no context!
  985. [ 2312.596363] pci 0000:00:1f.3: PCI INT C disabled
  986. [ 2312.660193] ata_piix 0000:00:1f.1: PCI INT A disabled
  987. [ 2312.660205] ehci_hcd 0000:00:1d.7: PCI INT A disabled
  988. [ 2312.660214] uhci_hcd 0000:00:1d.2: PCI INT C disabled
  989. [ 2312.660222] uhci_hcd 0000:00:1d.1: PCI INT B disabled
  990. [ 2312.660230] uhci_hcd 0000:00:1d.0: PCI INT A disabled
  991. [ 2312.868547] HDA Intel 0000:00:1b.0: PCI INT A disabled
  992. [ 2312.884492] ehci_hcd 0000:00:1a.7: PCI INT C disabled
  993. [ 2312.884504] uhci_hcd 0000:00:1a.1: PCI INT B disabled
  994. [ 2312.884515] uhci_hcd 0000:00:1a.0: PCI INT A disabled
  995. [ 2312.884923] ricoh-mmc: Suspending.
  996. [ 2312.884932] ricoh-mmc: Controller is now re-enabled.
  997. [ 2312.885080] r8169 0000:06:00.0: PME# enabled
  998. [ 2312.885150] r8169 0000:06:00.0: wake-up capability enabled by ACPI
  999. [ 2312.932438] ACPI: Preparing to enter system sleep state S3
  1000. [ 2312.940272] Disabling non-boot CPUs ...
  1001. [ 2312.940290] CPU0 attaching NULL sched-domain.
  1002. [ 2312.940293] CPU1 attaching NULL sched-domain.
  1003. [ 2312.988017] CPU0 attaching NULL sched-domain.
  1004. [ 2313.092026] CPU 1 is now offline
  1005. [ 2313.092028] SMP alternatives: switching to UP code
  1006. [ 2313.097535] Extended CMOS year: 2000
  1007. [ 2313.097535] Back to C!
  1008. [ 2313.097535] CPU0: Thermal monitoring enabled (TM2)
  1009. [ 2313.097535] Extended CMOS year: 2000
  1010. [ 2313.097535] Enabling non-boot CPUs ...
  1011. [ 2313.097535] SMP alternatives: switching to SMP code
  1012. [ 2313.102687] Booting processor 1 APIC 0x1 ip 0x6000
  1013. [ 2313.097457] Initializing CPU#1
  1014. [ 2313.097457] CPU: L1 I cache: 32K, L1 D cache: 32K
  1015. [ 2313.097457] CPU: L2 cache: 2048K
  1016. [ 2313.097457] CPU: Physical Processor ID: 0
  1017. [ 2313.097457] CPU: Processor Core ID: 1
  1018. [ 2313.097457] CPU1: Thermal monitoring enabled (TM2)
  1019. [ 2313.192049] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
  1020. [ 2313.192101] CPU0 attaching NULL sched-domain.
  1021. [ 2313.220015] CPU0 attaching sched-domain:
  1022. [ 2313.220018] domain 0: span 0-1 level MC
  1023. [ 2313.220021] groups: 0 1
  1024. [ 2313.220025] CPU1 attaching sched-domain:
  1025. [ 2313.220027] domain 0: span 0-1 level MC
  1026. [ 2313.220029] groups: 1 0
  1027. [ 2313.220460] CPU1 is up
  1028. [ 2313.220852] ACPI: Waking up from system sleep state S3
  1029. [ 2313.236218] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
  1030. [ 2313.236264] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  1031. [ 2313.236299] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  1032. [ 2313.236344] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
  1033. [ 2313.236397] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  1034. [ 2313.236405] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
  1035. [ 2313.236440] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
  1036. [ 2313.236464] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  1037. [ 2313.236471] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
  1038. [ 2313.236524] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
  1039. [ 2313.236538] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xf3f1f201)
  1040. [ 2313.236544] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600)
  1041. [ 2313.236550] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x2000b080)
  1042. [ 2313.236561] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  1043. [ 2313.236569] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
  1044. [ 2313.236621] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
  1045. [ 2313.236636] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xc011c001)
  1046. [ 2313.236642] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xf800f800)
  1047. [ 2313.236648] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2000c0c0)
  1048. [ 2313.236659] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
  1049. [ 2313.236667] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
  1050. [ 2313.236729] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  1051. [ 2313.236763] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  1052. [ 2313.236797] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
  1053. [ 2313.236841] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
  1054. [ 2313.236876] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
  1055. [ 2313.236882] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf810f810)
  1056. [ 2313.236888] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x62800000, writing 0x628000f0)
  1057. [ 2313.236902] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
  1058. [ 2313.236968] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
  1059. [ 2313.236995] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
  1060. [ 2313.237023] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
  1061. [ 2313.237050] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
  1062. [ 2313.237105] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0200000)
  1063. [ 2313.237182] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x2001)
  1064. [ 2313.237190] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xcc000004)
  1065. [ 2313.237198] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
  1066. [ 2313.237205] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xce000000)
  1067. [ 2313.237215] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
  1068. [ 2313.237318] iwl3945 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
  1069. [ 2313.237386] iwl3945 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf4000000)
  1070. [ 2313.237400] iwl3945 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  1071. [ 2313.237420] iwl3945 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
  1072. [ 2313.237567] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
  1073. [ 2313.237594] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xf8000004)
  1074. [ 2313.237604] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xc001)
  1075. [ 2313.237612] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
  1076. [ 2313.237622] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
  1077. [ 2313.237812] ricoh-mmc: Resuming.
  1078. [ 2313.237822] ricoh-mmc: Controller is now disabled.
  1079. [ 2313.237834] pci 0000:07:09.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
  1080. [ 2313.237858] pci 0000:07:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xf8101400)
  1081. [ 2313.237864] pci 0000:07:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
  1082. [ 2313.237872] pci 0000:07:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
  1083. [ 2313.252018] pci 0000:07:09.4: Refused to change power state, currently in D3
  1084. [ 2313.496959] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  1085. [ 2313.496967] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  1086. [ 2313.496995] usb usb3: root hub lost power or was reset
  1087. [ 2313.497016] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  1088. [ 2313.497023] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  1089. [ 2313.497049] usb usb4: root hub lost power or was reset
  1090. [ 2313.497069] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  1091. [ 2313.497076] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  1092. [ 2313.497087] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  1093. [ 2313.497095] HDA Intel 0000:00:1b.0: setting latency timer to 64
  1094. [ 2313.586357] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  1095. [ 2313.586368] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  1096. [ 2313.586394] usb usb5: root hub lost power or was reset
  1097. [ 2313.586416] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  1098. [ 2313.586423] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  1099. [ 2313.586453] usb usb6: root hub lost power or was reset
  1100. [ 2313.586477] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  1101. [ 2313.586484] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  1102. [ 2313.586514] usb usb7: root hub lost power or was reset
  1103. [ 2313.586537] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  1104. [ 2313.586544] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  1105. [ 2313.586560] pci 0000:00:1e.0: setting latency timer to 64
  1106. [ 2313.586570] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  1107. [ 2313.586579] ata_piix 0000:00:1f.1: setting latency timer to 64
  1108. [ 2313.586604] ahci 0000:00:1f.2: setting latency timer to 64
  1109. [ 2313.586715] pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
  1110. [ 2313.777988] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
  1111. [ 2313.777993] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
  1112. [ 2313.809342] ata1.00: configured for MWDMA2
  1113. [ 2313.905160] ata5: SATA link down (SStatus 0 SControl 300)
  1114. [ 2313.905307] ata4: SATA link down (SStatus 0 SControl 300)
  1115. [ 2314.301706] r8169 0000:06:00.0: wake-up capability disabled by ACPI
  1116. [ 2314.301714] r8169 0000:06:00.0: PME# disabled
  1117. [ 2314.380502] sdhci-pci 0000:07:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  1118. [ 2314.380521] firewire_core: skipped bus generations, destroying all nodes
  1119. [ 2314.444537] sd 2:0:0:0: [sda] Starting disk
  1120. [ 2314.880500] firewire_core: rediscovered device fw0
  1121. [ 2315.081521] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1122. [ 2315.082383] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  1123. [ 2315.083421] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  1124. [ 2315.083538] ata3.00: configured for UDMA/100
  1125. [ 2315.155234] PM: Finishing wakeup.
  1126. [ 2315.155236] Restarting tasks ... done.
  1127. [ 2316.639879] Registered led device: iwl-phy0::radio
  1128. [ 2316.640181] Registered led device: iwl-phy0::assoc
  1129. [ 2316.640483] Registered led device: iwl-phy0::RX
  1130. [ 2316.640746] Registered led device: iwl-phy0::TX
  1131. [ 2316.652921] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1132. [ 2316.654333] r8169: eth0: link down
  1133. [ 2316.654537] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1134. [ 2319.926757] wlan0: direct probe to AP 00:1e:2a:79:dc:78 (try 1)
  1135. [ 2319.928958] wlan0: direct probe responded
  1136. [ 2319.928963] wlan0: authenticate with AP 00:1e:2a:79:dc:78 (try 1)
  1137. [ 2319.930745] wlan0: authenticated
  1138. [ 2319.930767] wlan0: associate with AP 00:1e:2a:79:dc:78 (try 1)
  1139. [ 2319.933141] wlan0: RX AssocResp from 00:1e:2a:79:dc:78 (capab=0x411 status=0 aid=1)
  1140. [ 2319.933144] wlan0: associated
  1141. [ 2319.934665] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1142. [ 2330.685009] wlan0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!