<6>[    0.000000]@6 Initializing cgroup subsys cpu
<6>[    0.000000]@6 Initializing cgroup subsys cpuacct
<5>[    0.000000]@6 Linux version 3.10.49-Sandykernel (santhosh@busyboy)
(gcc version 4.9.x-aosp-sabermod 20140827 (prerelease) (GCC) ) #1 SMP
PREEMPT Mon Aug 31 13:18:32 CEST 2015
<4>[    0.000000]@6 CPU: AArch64 Processor [410fd032] revision 2
<6>[    0.000000]@6 qcom,product-name: 14049 hw_ver : 14
<6>[    0.000000]@6 Machine: Qualcomm Technologies, Inc. MSM8994v2.1 MTP
<6>[    0.000000]@6 cma: Found secure_region@0, memory base
0x0000000000000000, size 300 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found adsp_region@0, memory base
0x0000000000000000, size 63 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found qsecom_region@0, memory base
0x0000000000000000, size 24 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found audio_region@0, memory base
0x0000000000000000, size 6 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found removed_regions@0, memory base
0x0000000006300000, size 13 MiB, limit 0xffffffffffffffff
<4>[    0.000000]@6 OEM: Found memory_nvbackup, memory base
0x0000000006200000, size 1 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found dfps_data_mem@0, memory base
0x0000000003400000, size 0 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found cont_splash_mem@0, memory base
0x0000000003401000, size 34 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found peripheral_region@0, memory base
0x000000000ca00000, size 31 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found tzapp_region@0, memory base
0x000000000e900000, size 25 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: Found modem_region@0, memory base
0x0000000007000000, size 90 MiB, limit 0xffffffffffffffff
<4>[    0.000000]@6 OEM: Found ramoops_mem, memory base 0x00000000ac000000,
size 1 MiB, limit 0xffffffffffffffff
<4>[    0.000000]@6 OEM: Found param_mem, memory base 0x00000000ac200000,
size 1 MiB, limit 0xffffffffffffffff
<6>[    0.000000]@6 cma: CMA: reserved 300 MiB at 0x00000000e5400000 for
secure_mem
<6>[    0.000000]@6 cma: CMA: reserved 64 MiB at 0x00000000e1400000 for
adsp_mem
<6>[    0.000000]@6 cma: CMA: reserved 24 MiB at 0x00000000dfc00000 for
qseecom_mem
<6>[    0.000000]@6 cma: CMA: reserved 8 MiB at 0x00000000df400000 for
audio_mem
<6>[    0.000000]@6 cma: CMA: reserved 13 MiB at 0x0000000006300000 for
memory_hole
<6>[    0.000000]@6 cma: CMA: reserved 4 MiB at 0x0000000003400000 for
dfps_data_mem
<6>[    0.000000]@6 cma: CMA: reserved 36 MiB at 0x0000000003800000 for
cont_splash_mem
<6>[    0.000000]@6 cma: CMA: reserved 31 MiB at 0x000000000ca00000 for
peripheral_mem
<6>[    0.000000]@6 cma: CMA: reserved 25 MiB at 0x000000000e900000 for
tzapp_mem
<6>[    0.000000]@6 cma: CMA: reserved 90 MiB at 0x0000000007000000 for
modem_mem
<6>[    0.000000]@6 cma: CMA: reserved 16 MiB at 0x00000000de400000 for
default region
<7>[    0.000000]@6 On node 0 totalpages: 975104
<7>[    0.000000]@6   DMA zone: 41664 pages used for memmap
<7>[    0.000000]@6   DMA zone: 0 pages reserved
<7>[    0.000000]@6   DMA zone: 975104 pages, LIFO batch:31
<6>[    0.000000]@6 PERCPU: Embedded 17 pages/cpu @ffffffc0d3978000 s40832
r8192 d20608 u69632
<7>[    0.000000]@6 pcpu-alloc: s40832 r8192 d20608 u69632 alloc=17*4096
<7>[    0.000000]@6 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6
[0] 7
<4>[    0.000000]@6 Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 933440
<5>[    0.000000]@6 Kernel command line: sched_enable_hmp=1
sched_enable_power_aware=1 androidboot.hardware=qcom user_debug=31
msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1
boot_cpus=0-5  androidboot.bootdevice=f9824900.sdhci
androidboot.serialno=2b4f4fc6 androidboot.baseband=msm
mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jd35695_1080p_cmd:1:none maxcpus=8
androidboot.startupmode=reboot androidboot.mode=reboot lk_version=V1.0
lcd_gamma_select=0 androidboot.project_name=14049 androidboot.hw_version=14
androidboot.rf_v1=24 androidboot.rf_v2=0 androidboot.rf_v3=0
androidboot.ddr_manufacture_name=Samsung  androidboot.ddr_row=15
androidboot.ddr_column=10
<6>[    0.000000]@6 PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.000000]@6 Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
<6>[    0.000000]@6 Inode-cache hash table entries: 262144 (order: 9,
2097152 bytes)
<6>[    0.000000]@6 software IO TLB [mem 0xd3278000-0xd3378000] (1MB)
mapped at [ffffffc0d3278000-ffffffc0d3377fff]
<4>[    0.000000]@6 Memory: 3227352K/3900416K available (12013K kernel
code, 1080K rwdata, 4928K rodata, 1447K init, 2567K bss, 673064K reserved)
<5>[    0.000000]@6 Virtual kernel memory layout:
<5>[    0.000000]@6     vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000
(245759 MB)
<5>[    0.000000]@6     vmemmap : 0xffffffbc00000000 - 0xffffffbc0a2c0000
(   162 MB)
<5>[    0.000000]@6     modules : 0xffffffbffc000000 - 0xffffffc000000000
(    64 MB)
<5>[    0.000000]@6     memory  : 0xffffffc000000000 - 0xffffffc0f8000000
(  3968 MB)
<5>[    0.000000]@6       .init : 0xffffffc00110d000 - 0xffffffc001276f80
(  1448 kB)
<5>[    0.000000]@6       .text : 0xffffffc000080000 - 0xffffffc00110c504
( 16946 kB)
<5>[    0.000000]@6       .data : 0xffffffc001277000 - 0xffffffc001385048
(  1081 kB)
<6>[    0.000000]@6 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8,
Nodes=1
<6>[    0.000000]@6 HMP scheduling enabled.
<6>[    0.000000]@6 Preemptible hierarchical RCU implementation.
<6>[    0.000000]@6 RCU debugfs-based tracing is enabled.
<6>[    0.000000]@6 RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000]@6 Additional per-CPU info printed with stalls.
<6>[    0.000000]@6 NR_IRQS:64 nr_irqs:64 0
<6>[    0.000000]@6 Architected cp15 and mmio timer(s) running at 19.20MHz
(virt/virt).
<6>[    0.000000]@6 sched_clock: 56 bits at 19MHz, resolution 52ns, wraps
every 3579139424256ns
<7>[    0.000000]@6 ODEBUG: 467 of 467 active objects replaced
<6>[    0.000000]@6 kmemleak: Kernel memory leak detector disabled
<6>[    0.005667]@6 Calibrating delay loop (skipped), value calculated
using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[    0.005686]@6 pid_max: default: 32768 minimum: 301
<6>[    0.007871]@6 Security Framework initialized
<6>[    0.007910]@6 SELinux:  Initializing.
<7>[    0.008049]@6 SELinux:  Starting in permissive mode
<6>[    0.008334]@6 Mount-cache hash table entries: 256
<6>[    0.364619]@6 Initializing cgroup subsys debug
<6>[    0.364669]@6 Initializing cgroup subsys freezer
<6>[    0.364918]@6 ftrace: allocating 38083 entries in 149 pages
<3>[    0.459390]@6 /cpus/cpu@0: Missing clock-frequency property
<3>[    0.459415]@6 /cpus/cpu@1: Missing clock-frequency property
<3>[    0.459434]@6 /cpus/cpu@2: Missing clock-frequency property
<3>[    0.459453]@6 /cpus/cpu@3: Missing clock-frequency property
<3>[    0.459471]@6 /cpus/cpu@100: Missing clock-frequency property
<3>[    0.459492]@6 /cpus/cpu@101: Missing clock-frequency property
<3>[    0.459513]@6 /cpus/cpu@102: Missing clock-frequency property
<3>[    0.459536]@6 /cpus/cpu@103: Missing clock-frequency property
<6>[    0.468186]@6 hw perfevents: enabled with arm/armv8-pmuv3 PMU driver,
6 counters available
<6>[    0.472482]@6 ftrace: Allocated trace_printk buffers
<6>[    0.494051]@6 Core Debug Lock unlocked
<6>[    0.494378]@6 MSM Memory Dump base table set up
<6>[    0.494442]@6 MSM Memory Dump apps data table set up
<6>[    0.494469]@6 Configuring XPU violations to be fatal errors
<6>[    0.495694]@6 msm8994-v2: configuring clocks for the A57 cluster
<4>[    0.495814]@6 msm8994-v2: finished configuring A57 cluster clocks.
<6>[    0.599111]@6 Brought up 6 CPUs
<6>[    0.599134]@6 SMP: Total of 6 processors activated.
<6>[    0.760836]@6 pinctrl core: initialized pinctrl subsystem
<6>[    0.762735]@6 regulator-dummy: no parameters
<6>[    1.064743]@6 NET: Registered protocol family 16
<6>[    1.080840]@6 DMA: preallocated 256 KiB pool for atomic allocations
<6>[    1.140148]@6 cma: Assigned CMA region at 0 to
fd998300.qcom,mdss_dsi_pll device
<6>[    1.162486]@6 msm_watchdog f9017000.qcom,wdt: wdog absent resource
not present
<6>[    1.163308]@6 msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
<6>[    1.169606]@6 cma: Assigned CMA region at 0 to 0.qcom,dsp_sharedmem
device
<6>[    1.170629]@6 cma: Assigned CMA region at 0 to
0.qcom,sensors_sharedmem device
<3>[    1.177935]@6 spmi_pmic_arb fc4cf000.qcom,spmi: missing property:
qcom,pmic-arb-max-peripherals
<3>[    1.177961]@6 spmi_pmic_arb fc4cf000.qcom,spmi: PMIC Arb Version-1
0x20000002
<3>[    1.178297]@6 spmi_pmic_arb fc4cf000.qcom,spmi: missing property:
qcom,pmic-arb-max-periph-interrupts
<6>[    1.203746]@6 cma: Assigned CMA region at 0 to fdce0000.qcom,venus
device
<6>[    1.204428]@6 cma: Assigned CMA region at 0 to fc880000.qcom,mss
device
<6>[    1.204962]@6 cma: Assigned CMA region at 0 to fe200000.qcom,lpass
device
<6>[    1.232065]@6 console [pstore0] enabled
<6>[    1.232085]@6 ramoops: attached 0x100000@0xac000000, ecc: 0/0
<6>[    1.256365]@6 cma: Assigned CMA region at 0 to audio_heap.63 device
<6>[    1.256851]@6 cma: Assigned CMA region at 0 to adsp_heap.64 device
<6>[    1.261571]@6 mem_acc0_corner: 0 <--> 0 mV
<6>[    1.263720]@6 mem_acc1_corner: 0 <--> 0 mV
<6>[    1.337341]@6 vdso: 2 pages (1 code, 1 data) at base ffffffc00127d000
<3>[    1.338808]@6 msm_mpm_dev_probe(): Cannot get clk resource for XO
<6>[    1.338878]@6 platform fc4281d0.qcom,mpm: Driver mpm-v2 requests
probe deferral
<6>[    1.339586]@6 smd_open() before smd_init()
<6>[    1.339646]@6 platform qcom,rpm-smd.27: Driver rpm-smd requests probe
deferral
<6>[    1.341151]@6 msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
<3>[    1.348256]@6 smd_channel_probe_now: allocation table not initialized
<3>[    1.351068]@6 smd_channel_probe_now: allocation table not initialized
<2>[    1.361293]@6 SSR: Module loaded.
<6>[    1.364945]@6 pm8994_s8: 700 <--> 1180 mV at 1000 mV
<6>[    1.365713]@6 spm_regulator_probe: name=pm8994_s8, range=LV,
voltage=1000000 uV, mode=AUTO, step rate=2400 uV/us
<6>[    1.366515]@6 pm8994_s11: 700 <--> 1225 mV at 1000 mV
<6>[    1.367240]@6 spm_regulator_probe: name=pm8994_s11, range=LV,
voltage=1000000 uV, mode=AUTO, step rate=2400 uV/us
<6>[    1.368856]@6 cpr_efuse_init: apc0_corner: efuse_addr =
0x00000000fc4bc000 (len=0x1000)
<6>[    1.368987]@6 cpr_fuse_is_setting_expected: apc0_corner: [row:140] =
0x110194a500880c66 @61:3 == 1 ?: no
<6>[    1.369022]@6 cpr_read_fuse_revision: apc0_corner: fuse revision = 4
<6>[    1.369244]@6 cpr_adjust_init_voltages: apc0_corner: adjusted initial
voltage[2]: 840000 -> 815000 uV
<6>[    1.369270]@6 cpr_adjust_init_voltages: apc0_corner: adjusted initial
voltage[3]: 910000 -> 885000 uV
<6>[    1.369322]@6 cpr_pvs_init: apc0_corner: pvs voltage: [740000 815000
885000 1125000] uV
<6>[    1.369345]@6 cpr_pvs_init: apc0_corner: ceiling voltage: [900000
900000 1000000 1180000] uV
<6>[    1.369368]@6 cpr_pvs_init: apc0_corner: floor voltage: [700000
700000 780000 835000] uV
<6>[    1.370479]@6 platform f9019000.regulator: Driver qcom,cpr-regulator
requests probe deferral
<6>[    1.371074]@6 cpr_efuse_init: apc1_corner: efuse_addr =
0x00000000fc4bc000 (len=0x1000)
<6>[    1.371187]@6 cpr_fuse_is_setting_expected: apc1_corner: [row:140] =
0x110194a500880c66 @61:3 == 1 ?: no
<6>[    1.371368]@6 cpr_read_fuse_revision: apc1_corner: fuse revision = 4
<6>[    1.371397]@6 cpr_parse_speed_bin_fuse: apc1_corner: [row: 22]:
0x106145186a3df6b1, speed_bits = 1
<6>[    1.371619]@6 cpr_adjust_init_voltages: apc1_corner: adjusted initial
voltage[3]: 930000 -> 905000 uV
<6>[    1.371646]@6 cpr_adjust_init_voltages: apc1_corner: adjusted initial
voltage[4]: 1075000 -> 1040000 uV
<6>[    1.371690]@6 cpr_pvs_init: apc1_corner: pvs voltage: [830000 830000
905000 1040000] uV
<6>[    1.371713]@6 cpr_pvs_init: apc1_corner: ceiling voltage: [900000
900000 1000000 1225000] uV
<6>[    1.371734]@6 cpr_pvs_init: apc1_corner: floor voltage: [700000
700000 750000 835000] uV
<6>[    1.372714]@6 platform f901a000.regulator: Driver qcom,cpr-regulator
requests probe deferral
<6>[    1.374284]@6 lab_reg: 4600 <--> 6000 mV at 5500 mV
<6>[    1.375602]@6 ibb_reg: 4600 <--> 6000 mV at 5500 mV
<6>[    1.378150]@6 i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
<3>[    1.378387]@6 i2c-msm-v2 f9924000.i2c: error on clk_get(core_clk):-517
<3>[    1.378423]@6 i2c-msm-v2 f9924000.i2c: error probe() failed with
err:-517
<6>[    1.378526]@6 platform f9924000.i2c: Driver i2c-msm-v2 requests probe
deferral
<6>[    1.379338]@6 i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
<3>[    1.379552]@6 i2c-msm-v2 f9967000.i2c: error on clk_get(core_clk):-517
<3>[    1.379584]@6 i2c-msm-v2 f9967000.i2c: error probe() failed with
err:-517
<6>[    1.379675]@6 platform f9967000.i2c: Driver i2c-msm-v2 requests probe
deferral
<6>[    1.380492]@6 i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
<3>[    1.380692]@6 i2c-msm-v2 f9928000.i2c: error on clk_get(core_clk):-517
<3>[    1.380724]@6 i2c-msm-v2 f9928000.i2c: error probe() failed with
err:-517
<6>[    1.380812]@6 platform f9928000.i2c: Driver i2c-msm-v2 requests probe
deferral
<6>[    1.387055]@6 msm-thermal qcom,msm-thermal.61: msm_thermal:Failed
reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type
err=-22. KTM continues
<6>[    1.387098]@6 msm-thermal qcom,msm-thermal.61: msm_thermal:Failed
reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM
continues
<3>[    1.387234]@6 msm_thermal:msm_thermal_dev_probe Failed reading
node=/soc/qcom,msm-thermal, key=qcom,freq-control-mask. err:-517
<6>[    1.387306]@6 platform qcom,msm-thermal.61: Driver msm-thermal
requests probe deferral
<6>[    1.389495]@6 sps:sps is ready.
<6>[    1.391940]@6 platform fc401880.qcom,rpmcc: Driver qcom,rpmcc-8994
requests probe deferral
<6>[    1.393238]@6 platform fc400000.qcom,gcc: Driver qcom,gcc-8994
requests probe deferral
<6>[    1.394598]@6 platform fd8c0000.qcom,mmsscc: Driver qcom,mmsscc-8994
requests probe deferral
<6>[    1.396491]@6 platform f9015000.qcom,cpu-clock-8994: Driver
cpu-clock-8994 requests probe deferral
<3>[    1.401241]@6 msm_mpm_dev_probe(): Cannot get clk resource for XO
<6>[    1.401320]@6 platform fc4281d0.qcom,mpm: Driver mpm-v2 requests
probe deferral
<6>[    1.404758]@6 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    1.406947]@6 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    1.409103]@6 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
<6>[    1.412367]@6 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    1.414057]@6 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
<6>[    1.416459]@6 pm8994_s3: 1300 mV normal idle
<6>[    1.419082]@6 pm8994_s4: 1800 mV normal idle
<6>[    1.421649]@6 pm8994_s5: 2150 mV normal idle
<6>[    1.424066]@6 pm8994_s7: 1000 mV normal idle
<6>[    1.426752]@6 pm8994_l1: 1000 mV normal idle
<6>[    1.429191]@6 pm8994_l2: 1250 mV normal idle
<6>[    1.432921]@6 pm8994_l3: 1250 mV normal idle
<6>[    1.435594]@6 pm8994_l4: 1225 mV normal idle
<6>[    1.438220]@6 pm8994_l6: 1800 mV normal idle
<6>[    1.440688]@6 pm8994_l8: 1800 mV normal idle
<6>[    1.443359]@6 pm8994_l9: 1800 mV normal idle
<6>[    1.445812]@6 pm8994_l10: 1800 mV normal idle
<6>[    1.448309]@6 pm8994_l11: 1200 mV normal idle
<6>[    1.450889]@6 pm8994_l12: 1800 mV normal idle
<6>[    1.454169]@6 pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    1.456681]@6 pm8994_l14: 1800 mV normal idle
<6>[    1.459878]@6 pm8994_l15: 1800 mV normal idle
<6>[    1.463175]@6 pm8994_l16: 2700 mV normal idle
<6>[    1.465621]@6 pm8994_l17: 2700 mV normal idle
<6>[    1.468305]@6 pm8994_l18: 2850 mV normal idle
<6>[    1.470859]@6 pm8994_l19: 2800 mV normal idle
<6>[    1.473639]@6 pm8994_l20: 2950 mV normal idle
<6>[    1.476913]@6 pm8994_l21: 2950 mV normal idle
<6>[    1.479498]@6 pm8994_l22: 3000 mV normal idle
<6>[    1.482083]@6 pm8994_l23: 2800 mV normal idle
<6>[    1.484645]@6 pm8994_l24: 3075 <--> 3150 mV at 3075 mV normal idle
<6>[    1.487392]@6 pm8994_l25: 1000 mV normal idle
<6>[    1.489770]@6 pm8994_l26: 987 mV normal idle
<6>[    1.492519]@6 pm8994_l27: 1050 mV normal idle
<6>[    1.495471]@6 pm8994_l28: 1000 mV normal idle
<6>[    1.498714]@6 pm8994_l29: 2800 mV normal idle
<6>[    1.501282]@6 pm8994_l30: 1800 mV normal idle
<6>[    1.504648]@6 pm8994_l31: 1200 mV normal idle
<6>[    1.507383]@6 pm8994_l32: 1800 mV normal idle
<6>[    1.509976]@6 pm8994_lvs1: no parameters
<6>[    1.512454]@6 pm8994_lvs2: no parameters
<6>[    1.514790]@6 pmi8994_s1: 1025 mV normal idle
<6>[    1.517171]@6 pmi8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    1.519200]@6 pmi8994_s2_floor_corner: 0 <--> 0 mV at 0 mV normal
idle
<6>[    1.521695]@6 pmi8994_boost_5v: no parameters
<6>[    1.523419]@6 pmi8994_boost_pin_ctrl: no parameters
<6>[    1.525831]@6 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV
normal idle
<6>[    1.527325]@6 cpr_efuse_init: apc0_corner: efuse_addr =
0x00000000fc4bc000 (len=0x1000)
<6>[    1.527449]@6 cpr_fuse_is_setting_expected: apc0_corner: [row:140] =
0x110194a500880c66 @61:3 == 1 ?: no
<6>[    1.527484]@6 cpr_read_fuse_revision: apc0_corner: fuse revision = 4
<6>[    1.527762]@6 cpr_adjust_init_voltages: apc0_corner: adjusted initial
voltage[2]: 840000 -> 815000 uV
<6>[    1.527789]@6 cpr_adjust_init_voltages: apc0_corner: adjusted initial
voltage[3]: 910000 -> 885000 uV
<6>[    1.527852]@6 cpr_pvs_init: apc0_corner: pvs voltage: [740000 815000
885000 1125000] uV
<6>[    1.527877]@6 cpr_pvs_init: apc0_corner: ceiling voltage: [900000
900000 1000000 1180000] uV
<6>[    1.527899]@6 cpr_pvs_init: apc0_corner: floor voltage: [700000
700000 780000 835000] uV
<6>[    1.528909]@6 cpr_init_cpr_efuse: apc0_corner: [row:137] =
0x2d9a918d80000000
<6>[    1.528953]@6 cpr_init_cpr_efuse: apc0_corner: Corner[1]: ro_sel = 0,
target quot = 350
<6>[    1.528976]@6 cpr_init_cpr_efuse: apc0_corner: Corner[2]: ro_sel = 0,
target quot = 350
<6>[    1.528998]@6 cpr_init_cpr_efuse: apc0_corner: Corner[3]: ro_sel = 0,
target quot = 530
<6>[    1.529021]@6 cpr_init_cpr_efuse: apc0_corner: Corner[4]: ro_sel = 0,
target quot = 910
<6>[    1.529059]@6 cpr_adjust_target_quots: apc0_corner: Corner[2]:
adjusted target quot = 300
<6>[    1.529083]@6 cpr_adjust_target_quots: apc0_corner: Corner[3]:
adjusted target quot = 440
<3>[    1.529116]@6 cpr_init_cpr_efuse: apc0_corner: invalid quotient
values; permanently disabling CPR
<6>[    1.529327]@6 cpr_get_corner_quot_adjustment: apc0_corner: fuse
corner 2 quotient adjustment scaling factor: 0.000
<6>[    1.529347]@6 cpr_get_corner_quot_adjustment: apc0_corner: fuse
corner 3 quotient adjustment scaling factor: 0.454
<6>[    1.529366]@6 cpr_get_corner_quot_adjustment: apc0_corner: fuse
corner 4 quotient adjustment scaling factor: 0.597
<6>[    1.529395]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[1] = 350
<6>[    1.529412]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[2] = 300
<6>[    1.529429]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[3] = 300
<6>[    1.529447]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[4] = 300
<6>[    1.529464]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[5] = 364
<6>[    1.529481]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[6] = 397
<6>[    1.529498]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[7] = 440
<6>[    1.529515]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[8] = 498
<6>[    1.529532]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[9] = 555
<6>[    1.529550]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[10] = 727
<6>[    1.529567]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[11] = 785
<6>[    1.529584]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[12] = 865
<6>[    1.529602]@6 cpr_get_corner_quot_adjustment: apc0_corner: adjusted
quotient[13] = 910
<6>[    1.529879]@6 cpr_fill_override_voltage: apc0_corner: ceiling
override voltage: [900000 900000 900000 900000 1000000 1000000 1000000
1115000 1115000 1180000 1180000 1180000 1180000] uV
<6>[    1.529961]@6 cpr_fill_override_voltage: apc0_corner: floor override
voltage: [700000 700000 700000 725000 780000 800000 825000 835000 850000
915000 970000 980000 1000000] uV
<6>[    1.530346]@6 cpr_init_cpr_parameters: apc0_corner: up threshold = 2,
down threshold = 4
<6>[    1.530394]@6 cpr_init_cpr_parameters: apc0_corner: CPR is enabled by
default.
<6>[    1.530461]@6 cpr_config: apc0_corner: Timer count: 0x17700 (for 5000
us)
<6>[    1.531568]@6 apc0_corner: 0 <--> 0 mV
<6>[    1.533360]@6 cpr_efuse_init: apc1_corner: efuse_addr =
0x00000000fc4bc000 (len=0x1000)
<6>[    1.533491]@6 cpr_fuse_is_setting_expected: apc1_corner: [row:140] =
0x110194a500880c66 @61:3 == 1 ?: no
<6>[    1.533527]@6 cpr_read_fuse_revision: apc1_corner: fuse revision = 4
<6>[    1.533556]@6 cpr_parse_speed_bin_fuse: apc1_corner: [row: 22]:
0x106145186a3df6b1, speed_bits = 1
<6>[    1.533805]@6 cpr_adjust_init_voltages: apc1_corner: adjusted initial
voltage[3]: 930000 -> 905000 uV
<6>[    1.533833]@6 cpr_adjust_init_voltages: apc1_corner: adjusted initial
voltage[4]: 1075000 -> 1040000 uV
<6>[    1.533885]@6 cpr_pvs_init: apc1_corner: pvs voltage: [830000 830000
905000 1040000] uV
<6>[    1.533908]@6 cpr_pvs_init: apc1_corner: ceiling voltage: [900000
900000 1000000 1225000] uV
<6>[    1.533931]@6 cpr_pvs_init: apc1_corner: floor voltage: [700000
700000 750000 835000] uV
<6>[    1.534879]@6 cpr_init_cpr_efuse: apc1_corner: [row:138] =
0x79d0ed2a0a02aa66
<6>[    1.534924]@6 cpr_init_cpr_efuse: apc1_corner: Corner[1]: ro_sel = 4,
target quot = 800
<6>[    1.534947]@6 cpr_init_cpr_efuse: apc1_corner: Corner[2]: ro_sel = 4,
target quot = 800
<6>[    1.534970]@6 cpr_init_cpr_efuse: apc1_corner: Corner[3]: ro_sel = 4,
target quot = 1050
<6>[    1.534992]@6 cpr_init_cpr_efuse: apc1_corner: Corner[4]: ro_sel = 4,
target quot = 1350
<6>[    1.535039]@6 cpr_adjust_target_quots: apc1_corner: Corner[3]:
adjusted target quot = 945
<6>[    1.535063]@6 cpr_adjust_target_quots: apc1_corner: Corner[4]:
adjusted target quot = 1235
<6>[    1.535276]@6 cpr_get_corner_quot_adjustment: apc1_corner: fuse
corner 2 quotient adjustment scaling factor: 0.000
<6>[    1.535297]@6 cpr_get_corner_quot_adjustment: apc1_corner: fuse
corner 3 quotient adjustment scaling factor: 0.443
<6>[    1.535317]@6 cpr_get_corner_quot_adjustment: apc1_corner: fuse
corner 4 quotient adjustment scaling factor: 0.359
<6>[    1.535345]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[1] = 800
<6>[    1.535362]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[2] = 800
<6>[    1.535380]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[3] = 800
<6>[    1.535397]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[4] = 800
<6>[    1.535415]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[5] = 800
<6>[    1.535431]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[6] = 860
<6>[    1.535449]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[7] = 903
<6>[    1.535466]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[8] = 945
<6>[    1.535484]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[9] = 1050
<6>[    1.535501]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[10] = 1084
<6>[    1.535518]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[11] = 1118
<6>[    1.535536]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[12] = 1153
<6>[    1.535553]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[13] = 1187
<6>[    1.535570]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[14] = 1222
<6>[    1.535588]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[15] = 1235
<6>[    1.535605]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[16] = 1235
<6>[    1.535622]@6 cpr_get_corner_quot_adjustment: apc1_corner: adjusted
quotient[17] = 1235
<6>[    1.535885]@6 cpr_fill_override_voltage: apc1_corner: ceiling
override voltage: [900000 900000 900000 900000 900000 1000000 1000000
1000000 1160000 1160000 1160000 1160000 1160000 1225000 1225000 1225000
1225000] uV
<6>[    1.535977]@6 cpr_fill_override_voltage: apc1_corner: floor override
voltage: [700000 700000 700000 700000 725000 750000 775000 795000 835000
860000 880000 895000 915000 935000 945000 950000 980000] uV
<6>[    1.536334]@6 cpr_init_cpr_parameters: apc1_corner: up threshold = 2,
down threshold = 4
<6>[    1.536377]@6 cpr_init_cpr_parameters: apc1_corner: CPR is enabled by
default.
<6>[    1.536434]@6 cpr_config: apc1_corner: Timer count: 0x17700 (for 5000
us)
<6>[    1.538239]@6 apc1_corner: 0 <--> 0 mV
<6>[    1.540345]@6 i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
<3>[    1.540566]@6 i2c-msm-v2 f9924000.i2c: error on clk_get(core_clk):-517
<3>[    1.540600]@6 i2c-msm-v2 f9924000.i2c: error probe() failed with
err:-517
<6>[    1.540703]@6 platform f9924000.i2c: Driver i2c-msm-v2 requests probe
deferral
<6>[    1.541605]@6 i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
<3>[    1.541804]@6 i2c-msm-v2 f9967000.i2c: error on clk_get(core_clk):-517
<3>[    1.541835]@6 i2c-msm-v2 f9967000.i2c: error probe() failed with
err:-517
<6>[    1.541922]@6 platform f9967000.i2c: Driver i2c-msm-v2 requests probe
deferral
<6>[    1.542793]@6 i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
<3>[    1.542985]@6 i2c-msm-v2 f9928000.i2c: error on clk_get(core_clk):-517
<3>[    1.543016]@6 i2c-msm-v2 f9928000.i2c: error probe() failed with
err:-517
<6>[    1.543101]@6 platform f9928000.i2c: Driver i2c-msm-v2 requests probe
deferral
<6>[    1.543506]@6 msm-thermal qcom,msm-thermal.61: msm_thermal:Failed
reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type
err=-22. KTM continues
<6>[    1.543543]@6 msm-thermal qcom,msm-thermal.61: msm_thermal:Failed
reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM
continues
<6>[    1.543566]@6 msm_thermal:sensor_mgr_init_threshold threshold id
already initialized
<6>[    1.543988]@6 msm-thermal qcom,msm-thermal.61: probe_psm:Failed
reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22.
KTM continues
<6>[    1.545658]@6 msm_thermal:vdd_restriction_reg_init Defer vdd rstr
freq init.
<3>[    1.546701]@6 msm-thermal qcom,msm-thermal.61: probe_ocr:Failed
reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22.
KTM continues
<6>[    1.611940]@6 qcom,rpmcc-8994 fc401880.qcom,rpmcc: Registered RPM
clocks.
<4>[    1.648382]@6 clock_debug_add : gcc_blsp2_ahb_clk
<4>[    1.652845]@6 clock_debug_add : gcc_blsp2_qup6_spi_apps_clk
<6>[    1.673126]@6 qcom,gcc-8994 fc400000.qcom,gcc: Registered GCC clocks.
<6>[    1.722239]@6 qcom,mmsscc-8994 fd8c0000.qcom,mmsscc: Registered MMSS
clocks.
<6>[    1.724381]@6 cpu-clock-8994 f9015000.qcom,cpu-clock-8994: using A57
speed bin 1 and pvs_ver 0
<6>[    1.742550]@6 i2c-msm-v2 f9924000.i2c: probing driver i2c-msm-v2
<3>[    1.742963]@6 AXI: msm_bus_scale_register_client():
msm_bus_scale_register_client: Bus driver not ready.
<6>[    1.742992]@6 i2c-msm-v2 f9924000.i2c:
msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
<4>[    1.745982]@6 kworker/u16:2 (61) used greatest stack depth: 13096
bytes left
<6>[    1.747823]@6 i2c-msm-v2 f9967000.i2c: probing driver i2c-msm-v2
<3>[    1.748138]@6 AXI: msm_bus_scale_register_client():
msm_bus_scale_register_client: Bus driver not ready.
<6>[    1.748165]@6 i2c-msm-v2 f9967000.i2c:
msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
<4>[    1.750779]@6 kworker/u16:2 (63) used greatest stack depth: 12360
bytes left
<6>[    1.752666]@6 i2c-msm-v2 f9928000.i2c: probing driver i2c-msm-v2
<3>[    1.752987]@6 AXI: msm_bus_scale_register_client():
msm_bus_scale_register_client: Bus driver not ready.
<6>[    1.753015]@6 i2c-msm-v2 f9928000.i2c:
msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
<6>[    1.905435]@6 bio: create slab <bio-0> at 0
<3>[    1.920186]@6 msm_cpuss_dump cpuss_dump.66: Couldn't get memory for
dumping
<6>[    1.951051]@6 KPI: Bootloader start count = 42116
<6>[    1.951083]@6 KPI: Bootloader end count = 100781
<6>[    1.951099]@6 KPI: Bootloader display count = 74652
<6>[    1.951116]@6 KPI: Bootloader load kernel count = 3250
<6>[    1.951133]@6 KPI: Kernel MPM timestamp = 218749
<6>[    1.951148]@6 KPI: Kernel MPM Clock frequency = 32768
<6>[    1.951207]@6 socinfo_print: v10, id=207, ver=2.1, raw_id=2368,
raw_ver=1, hw_plat=8, hw_plat_ver=0
<6>[    1.951207]@6  accessory_chip=0, hw_plat_subtype=0, pmic_model=65545,
pmic_die_revision=131072 foundry_id=1 serial_number=23640658
<6>[    1.952662]@6 msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr
ffffff8000980000
<6>[    1.953110]@6 Physical OCMEM zone layout:
<6>[    1.953131]@6  zone graphics : 0xfec00000 - 0xfed7ffff (1536 KB)
<6>[    1.953186]@6  zone video : 0xfed80000 - 0xfedfffff ( 512 KB)
<6>[    1.957438]@6 shared_mem: Unlocked memory 0x00000000df400000 of size
800000
<6>[    1.957794]@6 shared_mem: Unlocked memory 0x00000000e1400000 of size
4000000
<3>[    1.958725]@6 init_project_info: project_name: 14049 hw_version: 14
rf_v1: 24 rf_v2: 0: rf_v3: 0
<6>[    1.959681]@6 platform bt_vreg.67: Driver reg-fixed-voltage requests
probe deferral
<6>[    1.959937]@6 platform usb-otg-switch.68: Driver reg-fixed-voltage
requests probe deferral
<6>[    1.961581]@6 vgaarb: loaded
<5>[    1.967387]@6 SCSI subsystem initialized
<6>[    1.968692]@6 usbcore: registered new interface driver usbfs
<6>[    1.969049]@6 usbcore: registered new interface driver hub
<6>[    1.969658]@6 usbcore: registered new device driver usb
<6>[    1.970479]@6 media: Linux media interface: v0.10
<6>[    1.970697]@6 Linux video capture interface: v2.00
<6>[    1.971014]@6 pps_core: LinuxPPS API ver. 1 registered
<6>[    1.971032]@6 pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
<6>[    1.971240]@6 PTP clock support registered
<6>[    1.971485]@6 EDAC MC: Ver: 3.0.0
<6>[    1.979898]@6 cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
<3>[    1.980058]@6 ION-heap mm: Cannot specify alignment for this type of
heap
<6>[    1.980435]@6 cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
<6>[    1.980679]@6 cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
<6>[    1.980862]@6 cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
<6>[    1.981103]@6 cma: Assigned CMA region at 0 to 17.qcom,ion-heap device
<6>[    1.981446]@6 ION heap system created
<6>[    1.981734]@6 ION heap kmalloc created
<6>[    1.981782]@6 ION heap mm created at 0x00000000e5400000 with size
12c00000
<6>[    1.981809]@6 ION heap adsp created at 0x00000000e1400000 with size
3f00000
<6>[    1.981847]@6 ION heap qsecom created at 0x00000000dfc00000 with size
1800000
<6>[    1.981888]@6 ION heap audio created at 0x00000000df400000 with size
614000
<6>[    1.981912]@6 ION heap pil_1 created at 0x000000000ca00000 with size
1f00000
<3>[    1.982394]@6 msm_bus_fabric_init_driver
<3>[    1.982633]@6 msm_bus_device fc460000.ad-hoc-bus: Dev 1024
<6>[    1.982650]@6 msm_bus_device fc460000.ad-hoc-bus: Util-fact is
missing, default to 100
<6>[    1.982658]@6 msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is
missing, default to 100
<6>[    1.982877]@6 msm_bus_device fc460000.ad-hoc-bus: msmbus_coresight
initialized
<3>[    1.982905]@6 msm_bus_device fc460000.ad-hoc-bus: Dev 0
<6>[    1.982919]@6 msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is
missing, default to 100
<6>[    1.983110]@6 msm_bus_device fc460000.ad-hoc-bus: msmbus_coresight
initialized
<3>[    1.983138]@6 msm_bus_device fc460000.ad-hoc-bus: Dev 4096
<6>[    1.983152]@6 msm_bus_device fc460000.ad-hoc-bus: Util-fact is
missing, default to 100
<6>[    1.983160]@6 msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is
missing, default to 100
<6>[    1.983364]@6 msm_bus_device fc460000.ad-hoc-bus: msmbus_coresight
initialized
<3>[    1.983391]@6 msm_bus_device fc460000.ad-hoc-bus: Dev 2048
<6>[    1.983408]@6 msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is
missing, default to 100
<6>[    1.983607]@6 msm_bus_device fc460000.ad-hoc-bus: msmbus_coresight
initialized
<3>[    1.983632]@6 msm_bus_device fc460000.ad-hoc-bus: Dev 5120
<6>[    1.983647]@6 msm_bus_device fc460000.ad-hoc-bus: Util-fact is
missing, default to 100
<6>[    1.983656]@6 msm_bus_device fc460000.ad-hoc-bus: Vrail-comp is
missing, default to 100
<4>[    1.983704]@6 msm_bus_device fc460000.ad-hoc-bus: Coresight support
absent for bus: 5120
<3>[    1.983727]@6 msm_bus_device fc460000.ad-hoc-bus: Dev 6144
<4>[    1.983774]@6 msm_bus_device fc460000.ad-hoc-bus: Coresight support
absent for bus: 6144
<3>[    1.987575]@6 msm_bus_init_clk: Valid node clk node 1024 ctx 0
<3>[    1.987582]@6 msm_bus_init_clk: Valid node clk node 1024 ctx
1msm_bus_init_clk: Valid node clk node 0 ctx 0
<3>[    1.987719]@6 msm_bus_init_clk: Valid node clk node 0 ctx
1msm_bus_init_clk: Valid node clk node 4096 ctx 0
<3>[    1.987844]@6 msm_bus_init_clk: Valid node clk node 4096 ctx
1msm_bus_init_clk: Valid node clk node 2048 ctx 0
<3>[    1.988051]@6 msm_bus_init_clk: Valid node clk node 2048 ctx
1msm_bus_init_clk: Valid node clk node 5120 ctx 0
<3>[    1.988181]@6 msm_bus_init_clk: Valid node clk node 5120 ctx
1msm_bus_init_clk: Valid node clk node 6144 ctx 0
<3>[    1.988314]@6 msm_bus_init_clk: Valid node clk node 6144 ctx
1msm_bus_fabric_init: Skip Fab init for virtual device 6144
<3>[    1.995576]@6 msm_bus_init_clk: Valid node clk node 604 ctx
0msm_bus_dev_init_qos: Skipping QOS init for 10039
<3>[    2.009257]@6 msm_bus_dev_init_qos: Skipping QOS init for
58msm_bus_dev_init_qos: Skipping QOS init for 89
<3>[    2.009274]@6 msm_bus_dev_init_qos: Skipping QOS init for
68msm_bus_dev_init_qos: Skipping QOS init for 604
<3>[    2.013189]@6 ipa ipa_uc_state_check:241 uC interface not initialized
<6>[    2.015419]@6 sps:BAM 0x00000000fd4c4000 is registered.
<3>[    2.016569]@6 ipa ipa_uc_state_check:241 uC interface not initialized
<6>[    2.016647]@6 sps:BAM 0x00000000fd4c4000 (va:0xffffff8000ba0000)
enabled: ver:0x24, number of pipes:20
<3>[    2.020984]@6 ipa ipa_uc_state_check:241 uC interface not initialized
<3>[    2.032492]@6 ipa ipa_uc_state_check:241 uC interface not initialized
<6>[    2.039853]@6 IPA driver initialization was successful.
<6>[    2.040982]@6 gdsc_venus: no parameters
<6>[    2.041492]@6 gdsc_venus_core0: fast normal
<6>[    2.041922]@6 gdsc_venus_core1: fast normal
<6>[    2.042407]@6 gdsc_venus_core2: fast normal
<6>[    2.042943]@6 gdsc_camss_top: no parameters
<6>[    2.043412]@6 gdsc_mdss: no parameters
<6>[    2.044033]@6 gdsc_jpeg: no parameters
<6>[    2.044064]@6 gdsc_jpeg: supplied by gdsc_camss_top
<6>[    2.044550]@6 gdsc_vfe: no parameters
<6>[    2.044582]@6 gdsc_vfe: supplied by gdsc_camss_top
<6>[    2.045075]@6 gdsc_cpp: no parameters
<6>[    2.045100]@6 gdsc_cpp: supplied by gdsc_camss_top
<6>[    2.045628]@6 gdsc_oxili_gx: no parameters
<6>[    2.045670]@6 gdsc_oxili_gx: supplied by pmi8994_s2_corner
<6>[    2.046069]@6 gdsc_oxili_cx: no parameters
<6>[    2.046555]@6 gdsc_pcie_0: no parameters
<6>[    2.046976]@6 gdsc_pcie_1: no parameters
<6>[    2.047345]@6 gdsc_usb30: no parameters
<6>[    2.047817]@6 gdsc_ufs: no parameters
<6>[    2.048256]@6 gdsc_fd: no parameters
<6>[    2.049338]@6 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
<6>[    2.053710]@6 dsi_pll_clock_register_20nm: Registered DSI PLL clocks
successfully
<6>[    2.053779]@6 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
<6>[    2.053845]@6 mdss_pll_util_resource_parse: dfps not enabled!
<3>[    2.053855]@6 mdss_pll_probe: Unable to get the pll 1 base resource
<6>[    2.054268]@6 dsi_pll_clock_register_20nm: Registered DSI PLL clocks
successfully
<6>[    2.054327]@6 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
<3>[    2.054339]@6 mdss_pll_probe: Unable to get the cell-index rc=-22
<6>[    2.054381]@6 mdss_pll_util_resource_parse: dfps not enabled!
<6>[    2.187153]@6 msm_iommu fda64000.qcom,iommu: device jpeg_iommu
(model: 0) mapped at ffffff8000ce0000, with 4 ctx banks
<6>[    2.188910]@6 msm_iommu fdc84000.qcom,iommu: device venus_iommu
(model: 0) mapped at ffffff8000d00000, with 5 ctx banks
<6>[    2.190689]@6 msm_iommu fdb10000.qcom,iommu: device kgsl_iommu
(model: 0) mapped at ffffff8000d20000, with 3 ctx banks
<6>[    2.191786]@6 cma: Assigned CMA region at 0 to
fdb1a000.qcom,iommu-ctx device
<6>[    2.192312]@6 msm_iommu_dev_v1: vfe_iommu: Keeping vfe non-secure
<6>[    2.192325]@6 msm_iommu fda44000.qcom,iommu: device vfe_iommu (model:
0) mapped at ffffff8000d40000, with 3 ctx banks
<6>[    2.193693]@6 msm_iommu fd864000.qcom,iommu: device fd_iommu (model:
0) mapped at ffffff8000d60000, with 3 ctx banks
<6>[    2.195122]@6 msm_iommu fda84000.qcom,iommu: device cpp_iommu (model:
0) mapped at ffffff8000d80000, with 3 ctx banks
<6>[    2.196428]@6 msm_iommu fd9cc000.qcom,iommu: device mdp_iommu (model:
0) mapped at ffffff8000da0000, with 3 ctx banks
<6>[    2.198601]@6 msm_iommu_ctx fda6c000.qcom,iommu-ctx: context
jpeg_enc0 using bank 0
<6>[    2.198870]@6 msm_iommu_ctx fda6d000.qcom,iommu-ctx: context
jpeg_enc1 using bank 1
<6>[    2.199142]@6 msm_iommu_ctx fda6e000.qcom,iommu-ctx: context jpeg_dec
using bank 2
<6>[    2.199368]@6 msm_iommu_ctx fda6f000.qcom,iommu-ctx: context jpeg_dma
using bank 3
<6>[    2.199612]@6 msm_iommu_ctx fdc8c000.qcom,iommu-ctx: context venus_ns
using bank 0
<6>[    2.199884]@6 msm_iommu_ctx fdc8d000.qcom,iommu-ctx: context
venus_sec_bitstream using bank 1
<6>[    2.200107]@6 msm_iommu_ctx fdc8e000.qcom,iommu-ctx: context venus_fw
using bank 2
<6>[    2.200365]@6 msm_iommu_ctx fdc8f000.qcom,iommu-ctx: context
venus_sec_pixel using bank 3
<6>[    2.200574]@6 msm_iommu_ctx fdc90000.qcom,iommu-ctx: context
venus_sec_non_pixel using bank 4
<6>[    2.200857]@6 msm_iommu_ctx fdb18000.qcom,iommu-ctx: context
gfx3d_user using bank 0
<6>[    2.201152]@6 msm_iommu_ctx fdb19000.qcom,iommu-ctx: context
gfx3d_priv using bank 1
<6>[    2.201410]@6 msm_iommu_ctx fdb1a000.qcom,iommu-ctx: context
gfx3d_spare using bank 2
<6>[    2.201694]@6 msm_iommu_ctx fda4c000.qcom,iommu-ctx: context vfe
using bank 0
<6>[    2.201921]@6 msm_iommu_ctx fda4d000.qcom,iommu-ctx: context cpp
using bank 1
<6>[    2.202144]@6 msm_iommu_ctx fda4e000.qcom,iommu-ctx: context
vfe_secure using bank 2
<6>[    2.202375]@6 msm_iommu_ctx fd86c000.qcom,iommu-ctx: context
camera_fd using bank 0
<6>[    2.202586]@6 msm_iommu_ctx fd86d000.qcom,iommu-ctx: context fd_1
using bank 1
<6>[    2.202851]@6 msm_iommu_ctx fd86e000.qcom,iommu-ctx: context fd_2
using bank 2
<6>[    2.203069]@6 msm_iommu_ctx fda8c000.qcom,iommu-ctx: context cpp_0
using bank 0
<6>[    2.203331]@6 msm_iommu_ctx fda8d000.qcom,iommu-ctx: context cpp_1
using bank 1
<6>[    2.203601]@6 msm_iommu_ctx fda8e000.qcom,iommu-ctx: context cpp_2
using bank 2
<6>[    2.203847]@6 msm_iommu_ctx fd9d4000.qcom,iommu-ctx: context mdp_0
using bank 0
<6>[    2.204221]@6 msm_iommu_ctx fd9d5000.qcom,iommu-ctx: context mdp_1
using bank 1
<6>[    2.204455]@6 msm_iommu_ctx fd9d6000.qcom,iommu-ctx: context mdp_2
using bank 2
<6>[    2.210343]@6 Advanced Linux Sound Architecture Driver Initialized.
<6>[    2.211267]@6 Bluetooth: Core ver 2.16
<6>[    2.211345]@6 NET: Registered protocol family 31
<6>[    2.211353]@6 Bluetooth: HCI device and connection manager initialized
<6>[    2.211376]@6 Bluetooth: HCI socket layer initialized
<6>[    2.211394]@6 Bluetooth: L2CAP socket layer initialized
<6>[    2.211440]@6 Bluetooth: SCO socket layer initialized
<6>[    2.211899]@6 cfg80211: Calling CRDA to update world regulatory domain
<6>[    2.211945]@6 cfg80211: World regulatory domain updated:
<6>[    2.211954]@6 cfg80211:   (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
<6>[    2.211962]@6 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.211971]@6 cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.211978]@6 cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.211986]@6 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.211993]@6 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.212000]@6 cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.212007]@6 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz),
(300 mBi, 2000 mBm)
<6>[    2.212014]@6 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000
KHz), (N/A, 0 mBm)
<1>[    2.212538]@6 pcie:pcie_init.
<6>[    2.219249]@6 platform bt_vreg.67: Driver reg-fixed-voltage requests
probe deferral
<6>[    2.219461]@6 platform usb-otg-switch.68: Driver reg-fixed-voltage
requests probe deferral
<6>[    2.219893]@6 Switching to clocksource arch_sys_counter
<6>[    2.283237]@6 bcl_peripheral:bcl_perph_init BCL Initialized
<6>[    2.286916]@6 NET: Registered protocol family 2
<6>[    2.288025]@6 TCP established hash table entries: 32768 (order: 7,
524288 bytes)
<6>[    2.288777]@6 TCP bind hash table entries: 32768 (order: 8, 1048576
bytes)
<6>[    2.289021]@6 TCP: Hash tables configured (established 32768 bind
32768)
<6>[    2.289191]@6 TCP: reno registered
<6>[    2.289405]@6 UDP hash table entries: 2048 (order: 5, 196608 bytes)
<6>[    2.289646]@6 UDP-Lite hash table entries: 2048 (order: 5, 196608
bytes)
<6>[    2.290258]@6 NET: Registered protocol family 1
<7>[    2.290311]@6 PCI: CLS 0 bytes, default 64
<6>[    2.290575]@6 platform bt_vreg.67: Driver reg-fixed-voltage requests
probe deferral
<6>[    2.290746]@6 platform usb-otg-switch.68: Driver reg-fixed-voltage
requests probe deferral
<6>[    2.291174]@6 Trying to unpack rootfs image as initramfs...
<6>[    2.338501]@6 Freeing initrd memory: 1476K (ffffffc002000000 -
ffffffc002171000)
<6>[    2.345587]@6 audit: initializing netlink socket (disabled)
<5>[    2.345664]@6 type=2000 audit(2.249:1): initialized
<4>[    2.349350]@6 error setting kswapd cpu affinity mask
<6>[    2.369104]@6 NTFS driver 2.1.30 [Flags: R/O].
<6>[    2.369912]@6 fuse init (API version 7.23)
<6>[    2.370463]@6 exFAT: Core Version 1.2.12
<6>[    2.370472]@6 exFAT: FS Version 1.2.12
<6>[    2.370658]@6 msgmni has been set to 7114
<7>[    2.370738]@6 SELinux:  Registering netfilter hooks
<5>[    2.375429]@6 Key type asymmetric registered
<5>[    2.375439]@6 Asymmetric key parser 'x509' registered
<6>[    2.375741]@6 Block layer SCSI generic (bsg) driver version 0.4
loaded (major 246)
<6>[    2.375750]@6 io scheduler noop registered
<6>[    2.375756]@6 io scheduler deadline registered
<6>[    2.375923]@6 io scheduler row registered
<6>[    2.376247]@6 io scheduler cfq registered (default)
<3>[    2.379997]@6 qcom,qpnp-pin qpnp-pin-ffffffc0d15e9080:
qpnp_pin_probe: no device nodes specified in topology
<4>[    2.380025]@6 qcom,qpnp-pin: probe of qpnp-pin-ffffffc0d15e9080
failed with error -22
<6>[    2.382437]@6 platform qcom,smp2pgpio-ssr-smp2p-2-in.13: Driver
smp2pgpio requests probe deferral
<6>[    2.382688]@6 platform qcom,smp2pgpio-ssr-smp2p-2-out.14: Driver
smp2pgpio requests probe deferral
<6>[    2.382930]@6 platform qcom,smp2pgpio-ssr-smp2p-1-in.15: Driver
smp2pgpio requests probe deferral
<6>[    2.383172]@6 platform qcom,smp2pgpio-ssr-smp2p-1-out.16: Driver
smp2pgpio requests probe deferral
<3>[    2.383923]@6 msm_dss_get_res_byname: 'vbif_nrt_phys' resource not
found
<3>[    2.383941]@6 mdss_mdp_probe+0x274/0xe4c->msm_dss_ioremap_byname:
'vbif_nrt_phys' msm_dss_get_res_byname failed
<4>[    2.383955]@6 mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not
found
<6>[    2.384070]@6 mdss_mdp_pipe_addr_setup: type:1 ftchid:1 xinid:0 num:0
ndx:0x1 prio:0
<6>[    2.384078]@6 mdss_mdp_pipe_addr_setup: type:1 ftchid:4 xinid:4 num:1
ndx:0x2 prio:1
<6>[    2.384085]@6 mdss_mdp_pipe_addr_setup: type:1 ftchid:7 xinid:8 num:2
ndx:0x4 prio:2
<6>[    2.384096]@6 mdss_mdp_pipe_addr_setup: type:2 ftchid:16 xinid:1
num:3 ndx:0x8 prio:4
<6>[    2.384103]@6 mdss_mdp_pipe_addr_setup: type:2 ftchid:17 xinid:5
num:4 ndx:0x10 prio:5
<6>[    2.384110]@6 mdss_mdp_pipe_addr_setup: type:2 ftchid:18 xinid:9
num:5 ndx:0x20 prio:6
<6>[    2.384121]@6 mdss_mdp_pipe_addr_setup: type:3 ftchid:10 xinid:2
num:6 ndx:0x40 prio:8
<6>[    2.384128]@6 mdss_mdp_pipe_addr_setup: type:3 ftchid:13 xinid:10
num:7 ndx:0x80 prio:9
<6>[    2.384135]@6 mdss_mdp_pipe_addr_setup: type:1 ftchid:19 xinid:12
num:8 ndx:0x100 prio:3
<6>[    2.384142]@6 mdss_mdp_pipe_addr_setup: type:2 ftchid:22 xinid:13
num:9 ndx:0x200 prio:7
<6>[    2.384204]@6 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:2
num:10 ndx:0x400 prio:0
<6>[    2.384212]@6 mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:10
num:11 ndx:0x800 prio:1
<6>[    2.384219]@6 mdss_mdp_parse_dt_pipe: dedicated vp cursors detected,
num=2
<3>[    2.384391]@6 mdss_mdp_parse_dt_handler: Error from prop
qcom,mdss-ib-factor-overlap : u32 array read
<3>[    2.384403]@6 mdss_mdp_parse_dt_handler: Error from prop
qcom,mdss-ib-factor-cmd : u32 array read
<6>[    2.384418]@6 mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels :
doesn't exist in device tree
<3>[    2.385220]@6 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
<3>[    2.385925]@6 getpath: Cannot locate src dev 36
<3>[    2.385933]@6 register_client_adhoc:Failed to find path.src 36 dest
627<4>[    2.385942]@6 mdss_mdp_bus_scale_register: reg_bus_client register
failed
<6>[    2.386625]@6 xlog_status: enable:1, panic:1, dump:2
<6>[    2.389929]@6 mdss_mdp_probe: mdss version = 0x10090000, bootloader
display is on
<6>[    2.391184]@6 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    2.391559]@6 mdss_dsi_panel_init: Panel Name = jd35695 1080p cmd
mode dsi panel
<3>[    2.391764]@6 mdss_dsi_parse_dcs_cmds: failed,
key=qcom,mdss-dsi-on-command-oa
<6>[    2.391811]@6 mdss_dsi_parse_panel_features: partial_update_enabled=0
<6>[    2.391822]@6 mdss_dsi_parse_panel_features: ulps feature disabled
<6>[    2.391830]@6 mdss_dsi_parse_panel_features: ulps during suspend
feature disabled
<6>[    2.391840]@6 mdss_dsi_parse_dms_config: dynamic switch feature
enabled: 0
<3>[    2.391859]@6 mdss_dsi_parse_panel_features:1722, Disp_en gpio not
specified
<6>[    2.391872]@6 mdss_dsi_panel_init: Continuous splash enabled
<6>[    2.392361]@6 mdss_dsi_panel_init: Panel Manufacture = JDI
<6>[    2.392369]@6 mdss_dsi_panel_init: Panel Version = JD35695
<3>[    2.392822]@6 dsi_panel_device_register:2145, Disp_en gpio not
specified
<6>[    2.392929]@6 dsi_panel_device_register: bklt_en gpio not specified
<6>[    2.393422]@6 mdss_dsi_retrieve_ctrl_resources:
ctrl_base=ffffff8000d1c000 ctrl_size=260 phy_base=ffffff8000d1e500
phy_size=280
<6>[    2.393432]@6 mdss_dsi_retrieve_ctrl_resources:
phy_regulator_base=ffffff8000d3c780 phy_regulator_size=30
<3>[    2.394310]@6 mdss_dsi_panel_power_on
<6>[    2.395480]@6 mdss_register_panel: adding framebuffer device
fd998000.qcom,mdss_dsi
<6>[    2.396024]@6 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
<3>[    2.396052]@6 mdss_dsi_pinctrl_init: failed to get pinctrl
<4>[    2.396060]@6 mdss_dsi_ctrl_probe: failed to get pin resources
<3>[    2.396257]@6 mdss_dsi_find_panel_of_node: invalid pan node,
selecting prim panel
<3>[    2.396265]@6 mdss_dsi_ctrl_probe: can't find panel node
0:qcom,mdss_dsi_jd35695_1080p_cmd:1:none
<4>[    2.396298]@6 mdss_dsi_ctrl: probe of fd9a0000.qcom,mdss_dsi failed
with error 40
<6>[    2.396869]@6 mdss_dsi_status_init: DSI status check interval:5000
<6>[    2.397237]@6 mdss_register_panel: adding framebuffer device
qcom,mdss_wb_panel.20
<6>[    2.398820]@6 mdss_fb_register: FrameBuffer[0] 1080x1920 registered
successfully!
<4>[    2.398921]@6 mdss_mdp_pp_resume: Failed to get AD info, err = -112
<6>[    2.399572]@6 mdss_fb_register: FrameBuffer[1] 1920x1080 registered
successfully!
<3>[    2.399678]@6 mdss_mdp_splash_parse_dt: splash mem child node is not
present
<3>[    2.402169]@6 IPC_RTR: msm_ipc_router_smd_driver_register Already
driver registered IPCRTR
<5>[    2.404151]@6 msm_rpm_log_probe: OK
<3>[    2.410059]@6 subsys-pil-tz fe200000.qcom,lpass: [adsp]: Error
getting proxy unvoting gpio
<6>[    2.410193]@6 platform fe200000.qcom,lpass: Driver subsys-pil-tz
requests probe deferral
<3>[    2.411848]@6 pil-q6v5-mss fc880000.qcom,mss: [modem]: Error getting
proxy unvoting gpio
<6>[    2.412232]@6 platform fc880000.qcom,mss: Driver pil-q6v5-mss
requests probe deferral
<6>[    2.413992]@6 NET: Registered protocol family 27
<3>[    2.418133]@6 sps: BAM device 0x00000000f9944000 is not registered
yet.
<6>[    2.418154]@6 sps:BAM 0x00000000f9944000 is registered.
<6>[    2.421164]@6 f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is
a MSM HS UART
<4>[    2.423689]@6 msm_serial_hsl_init:0
<6>[    2.435695]@6 kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
<6>[    2.446716]@6 brd: module loaded
<6>[    2.450976]@6 loop: module loaded
<3>[    2.451648]@6 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
<4>[    2.451694]@6 QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
<4>[    2.451701]@6 QSEECOM: qseecom_probe:
file-encrypt-pipe-pair=0x0QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
<6>[    2.451724]@6 QSEECOM: qseecom_probe: no-clock-support=0x1QSEECOM:
qseecom_probe: secure app region addr=0xe900000 size=0x1900000
<4>[    2.460538]@6 i2c-core: driver [tabla-i2c-core] using legacy suspend
method
<4>[    2.460550]@6 i2c-core: driver [tabla-i2c-core] using legacy resume
method
<4>[    2.460740]@6 i2c-core: driver [wcd9xxx-i2c-core] using legacy
suspend method
<4>[    2.460747]@6 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume
method
<6>[    2.462113]@6 qce fd440000.qcedev: Qualcomm Crypto 5.3.0 device found
@0xfd440000
<6>[    2.462127]@6 qce fd440000.qcedev: CE device = 0x0
<6>[    2.462127]@6 , IO base, CE = 0xffffff80017c0000
<6>[    2.462127]@6 , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
<6>[    2.462127]@6 IO base BAM = 0x          (null)
<6>[    2.462127]@6 BAM IRQ 268
<6>[    2.462127]@6 Engines Availability = 0x2010853
<6>[    2.462167]@6 sps:BAM 0x00000000fd444000 is registered.
<6>[    2.462503]@6 sps:BAM 0x00000000fd444000 (va:0xffffff8000f10000)
enabled: ver:0x24, number of pipes:8
<6>[    2.462871]@6 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at
0x00000000fd444000 irq 268
<6>[    2.463432]@6 qcedev: FIPS140-2 Known Answer Tests : Skipped
<6>[    2.464657]@6 qcrypto fd440000.qcrypto1fde: Qualcomm Crypto 5.3.0
device found @0xfd440000
<6>[    2.464670]@6 qcrypto fd440000.qcrypto1fde: CE device = 0x0
<6>[    2.464670]@6 , IO base, CE = 0xffffff80018c0000
<6>[    2.464670]@6 , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
<6>[    2.464670]@6 IO base BAM = 0x          (null)
<6>[    2.464670]@6 BAM IRQ 268
<6>[    2.464670]@6 Engines Availability = 0x2010853
<6>[    2.465228]@6 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at
0x00000000fd444000 irq 268
<6>[    2.466125]@6 qcrypto fd440000.qcrypto1fde: qcrypto-ecb-aes
<6>[    2.466356]@6 qcrypto fd440000.qcrypto1fde: qcrypto-cbc-aes
<6>[    2.466586]@6 qcrypto fd440000.qcrypto1fde: qcrypto-ctr-aes
<6>[    2.466813]@6 qcrypto fd440000.qcrypto1fde: qcrypto-ecb-des
<6>[    2.467036]@6 qcrypto fd440000.qcrypto1fde: qcrypto-cbc-des
<6>[    2.467264]@6 qcrypto fd440000.qcrypto1fde: qcrypto-ecb-3des
<6>[    2.467486]@6 qcrypto fd440000.qcrypto1fde: qcrypto-cbc-3des
<6>[    2.467713]@6 qcrypto fd440000.qcrypto1fde: qcrypto-xts-aes
<6>[    2.467944]@6 qcrypto fd440000.qcrypto1fde: qcrypto-sha1
<6>[    2.468168]@6 qcrypto fd440000.qcrypto1fde: qcrypto-sha256
<6>[    2.468389]@6 qcrypto fd440000.qcrypto1fde:
qcrypto-aead-hmac-sha1-cbc-aes
<6>[    2.468627]@6 qcrypto fd440000.qcrypto1fde:
qcrypto-aead-hmac-sha1-cbc-des
<6>[    2.468850]@6 qcrypto fd440000.qcrypto1fde:
qcrypto-aead-hmac-sha1-cbc-3des
<6>[    2.469073]@6 qcrypto fd440000.qcrypto1fde:
qcrypto-aead-hmac-sha256-cbc-aes
<6>[    2.469295]@6 qcrypto fd440000.qcrypto1fde:
qcrypto-aead-hmac-sha256-cbc-des
<6>[    2.469522]@6 qcrypto fd440000.qcrypto1fde:
qcrypto-aead-hmac-sha256-cbc-3des
<6>[    2.469747]@6 qcrypto fd440000.qcrypto1fde: qcrypto-hmac-sha1
<6>[    2.470060]@6 qcrypto fd440000.qcrypto1fde: qcrypto-hmac-sha256
<6>[    2.470284]@6 qcrypto fd440000.qcrypto1fde: qcrypto-aes-ccm
<6>[    2.470504]@6 qcrypto fd440000.qcrypto1fde: qcrypto-rfc4309-aes-ccm
<6>[    2.470511]@6 qcrypto: FIPS140-2 Known Answer Tests: Skipped
<6>[    2.471207]@6 qcrypto fd3c0000.qcrypto2fde: Qualcomm Crypto 5.3.0
device found @0xfd3c0000
<6>[    2.471219]@6 qcrypto fd3c0000.qcrypto2fde: CE device = 0x0
<6>[    2.471219]@6 , IO base, CE = 0xffffff8001980000
<6>[    2.471219]@6 , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
<6>[    2.471219]@6 IO base BAM = 0x          (null)
<6>[    2.471219]@6 BAM IRQ 329
<6>[    2.471219]@6 Engines Availability = 0x2010853
<6>[    2.471255]@6 sps:BAM 0x00000000fd3c4000 is registered.
<6>[    2.471586]@6 sps:BAM 0x00000000fd3c4000 (va:0xffffff80017a0000)
enabled: ver:0x24, number of pipes:8
<6>[    2.471932]@6 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at
0x00000000fd3c4000 irq 329
<6>[    2.472429]@6 qcrypto: FIPS140-2 Known Answer Tests: Skipped
<6>[    2.472853]@6 qcrypto fd440000.qcrypto1pfe: Qualcomm Crypto 5.3.0
device found @0xfd440000
<6>[    2.472865]@6 qcrypto fd440000.qcrypto1pfe: CE device = 0x1
<6>[    2.472865]@6 , IO base, CE = 0xffffff80019c0000
<6>[    2.472865]@6 , Consumer (IN) PIPE 0,    Producer (OUT) PIPE 1
<6>[    2.472865]@6 IO base BAM = 0x          (null)
<6>[    2.472865]@6 BAM IRQ 268
<6>[    2.472865]@6 Engines Availability = 0x2010853
<6>[    2.473380]@6 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at
0x00000000fd444000 irq 268
<6>[    2.473895]@6 qcrypto: FIPS140-2 Known Answer Tests: Skipped
<6>[    2.474757]@6 qcrypto fd3c0000.qcrypto2pfe: Qualcomm Crypto 5.3.0
device found @0xfd3c0000
<6>[    2.474772]@6 qcrypto fd3c0000.qcrypto2pfe: CE device = 0x1
<6>[    2.474772]@6 , IO base, CE = 0xffffff8001a00000
<6>[    2.474772]@6 , Consumer (IN) PIPE 0,    Producer (OUT) PIPE 1
<6>[    2.474772]@6 IO base BAM = 0x          (null)
<6>[    2.474772]@6 BAM IRQ 329
<6>[    2.474772]@6 Engines Availability = 0x2010853
<6>[    2.475338]@6 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at
0x00000000fd3c4000 irq 329
<6>[    2.475908]@6 qcrypto: FIPS140-2 Known Answer Tests: Skipped
<3>[    2.481429]@6 ufshcd fc594000.ufshc: ufshcd_variant_hba_init: variant
qcom init failed err -19
<3>[    2.485020]@6 ufshcd fc594000.ufshc: Intialization failed
<6>[    2.486368]@6 SCSI Media Changer driver v0.25
<6>[    2.494486]@6 tun: Universal TUN/TAP device driver, 1.6
<6>[    2.494496]@6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    2.494649]@6 e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[    2.494657]@6 e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
<6>[    2.494859]@6 PPP generic driver version 2.4.2
<6>[    2.495104]@6 PPP BSD Compression module registered
<6>[    2.495117]@6 PPP Deflate Compression module registered
<6>[    2.495146]@6 PPP MPPE Compression module registered
<6>[    2.495155]@6 NET: Registered protocol family 24
<3>[    2.495887]@6 cnss_wlan_get_resources: vreg probe defer
<6>[    2.495959]@6 platform 6300000.qcom,cnss: Driver cnss requests probe
deferral
<6>[    2.497363]@6 usbcore: registered new interface driver asix
<6>[    2.497453]@6 usbcore: registered new interface driver ax88179_178a
<6>[    2.497508]@6 usbcore: registered new interface driver cdc_ether
<6>[    2.497583]@6 usbcore: registered new interface driver net1080
<6>[    2.497644]@6 usbcore: registered new interface driver cdc_subset
<6>[    2.497701]@6 usbcore: registered new interface driver zaurus
<6>[    2.498073]@6 usbcore: registered new interface driver cdc_ncm
<6>[    2.499011]@6 msm_sharedmem: sharedmem_register_qmi: qmi init
successful
<6>[    2.501428]@6 msm_sharedmem: msm_sharedmem_probe: Device created for
client 'rmtfs'
<6>[    2.506045]@6 msm_sharedmem: msm_sharedmem_probe: Device created for
client 'rfsa_dsp'
<6>[    2.506745]@6 msm_sharedmem: msm_sharedmem_probe: Device created for
client 'rfsa_mdm'
<6>[    2.507279]@6 msm_sharedmem: msm_sharedmem_probe: Device created for
client 'rfsa_sensor'
<3>[    2.512086]@6 msm-qusb-phy f9b39000.qusb: invalid resource
<6>[    2.563358]@6 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
<6>[    2.563371]@6 ehci-pci: EHCI PCI platform driver
<6>[    2.563435]@6 ehci-msm: Qualcomm On-Chip EHCI Host Controller
<6>[    2.563701]@6 ehci-msm2: Qualcomm EHCI Host Controller
<6>[    2.564567]@6 usbcore: registered new interface driver cdc_acm
<6>[    2.564575]@6 cdc_acm: USB Abstract Control Model driver for USB
modems and ISDN adapters
<6>[    2.564659]@6 usbcore: registered new interface driver ccid_bridge
<6>[    2.564851]@6 ccid_bridge_init: success
<6>[    2.564979]@6 usbcore: registered new interface driver usb-storage
<6>[    2.565036]@6 usbcore: registered new interface driver ums-alauda
<6>[    2.565086]@6 usbcore: registered new interface driver ums-cypress
<6>[    2.565135]@6 usbcore: registered new interface driver ums-datafab
<6>[    2.565181]@6 usbcore: registered new interface driver ums-freecom
<6>[    2.565225]@6 usbcore: registered new interface driver ums-isd200
<6>[    2.565268]@6 usbcore: registered new interface driver ums-jumpshot
<6>[    2.565310]@6 usbcore: registered new interface driver ums-karma
<6>[    2.565351]@6 usbcore: registered new interface driver ums-sddr09
<6>[    2.565416]@6 usbcore: registered new interface driver ums-sddr55
<6>[    2.565463]@6 usbcore: registered new interface driver ums-usbat
<6>[    2.565664]@6 usbcore: registered new interface driver usbserial
<6>[    2.565719]@6 usbcore: registered new interface driver qc_csvt
<6>[    2.565765]@6 usbserial: USB Serial support registered for qc_csvt
<6>[    2.565817]@6 usbcore: registered new interface driver usb_ehset_test
<6>[    2.567921]@6 mousedev: PS/2 mouse device common for all mice
<6>[    2.568244]@6 usbcore: registered new interface driver xpad
<4>[    2.568254]@6 Synaptics:tpd_driver_init is called
<4>[    2.568651]@6 boot_time: before optimize [synaptics_ts_probe]  on cpu
4
<4>[    2.568659]@6 boot_time: [synaptics_ts_probe] CPU0 is online
<3>[    2.569063]@6 touchkey,s1302: boot_time: before optimize
[synaptics_ts_probe]  on cpu 4
<3>[    2.569071]@6 touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is
online
<3>[    2.569312]@6 fpc1020 spi12.0: cs [0] CPHA [0] CPOL [0] CS_HIGH [0]
<3>[    2.569322]@6 fpc1020 spi12.0: Max_speed [19200000]
<6>[    2.569333]@6 fpc1020_probe
<6>[    2.569351]@6 (NULL device *): fpc1020_manage_huge_buffer, size=4096
bytes
<6>[    2.569600]@6 fpc1020 spi12.0: External TxOut supply (1 mV)
<7>[    2.569610]@6 fpc1020 spi12.0: fpc1020_regulator_configure
<7>[    2.569809]@6 fpc1020 spi12.0: fpc1020_regulator_set on
<6>[    2.570957]@6 fpc1020_spi_setup
<6>[    2.576170]@6 fpc1020 spi12.0: Hardware id: 0x150b (fpc1150b, rev.1)
<6>[    2.576220]@6 fpc1020 spi12.0: fpc1020_manage_huge_buffer, size=65536
bytes
<7>[    2.576229]@6 fpc1020 spi12.0: fpc1020_setup_defaults OK
<3>[    2.576235]@6 fpc1020 spi12.0: fpc1020_create_class
<3>[    2.576291]@6 fpc1020 spi12.0: fpc1020_create_device
<6>[    2.576303]@6 fpc1020 spi12.0: fpc1020_create_device: major=233,
minor=0
<3>[    2.576427]@6 fpc1020 spi12.0: fpc1020_manage_sysfs create
<6>[    2.576546]@6 fpc1020_worker_init
<7>[    2.583714]@6 fpc1020 spi12.0:
fpc1020_calc_finger_detect_threshold_min : measured min = 0
<7>[    2.583721]@6 fpc1020 spi12.0: fpc1020_input_init
<6>[    2.583939]@6 input: fpc1020 as /devices/virtual/input/input0
<6>[    2.584374]@6 input: fpc1020tp as /devices/virtual/input/input1
<7>[    2.584648]@6 fpc1020 spi12.0: fpc1020_worker_goto_idle, already idle
<7>[    2.584691]@6 fpc1020 spi12.0: fpc1020_capture_deferred_task
<7>[    2.584702]@6 fpc1020 spi12.0: fpc1020_regulator_set on
<4>[    2.587121]@6 switch_theme_probe
<4>[    2.587144]@6 switch_theme_probe, vadc not found - defer rc=-517
<6>[    2.587167]@6 platform switch_theme.84: Driver switch-theme requests
probe deferral
<6>[    2.587698]@6 qcom,qpnp-rtc qpnp-rtc-ffffffc0d15e8000: rtc core:
registered qpnp_rtc as rtc0
<6>[    2.588016]@6 i2c /dev entries driver
<7>[    2.593966]@6 fpc1020 spi12.0:
fpc1020_calc_finger_detect_threshold_min : measured min = 0
<6>[    2.594191]@6 platform fdc00000.qcom,vidc: Driver msm_vidc_v4l2
requests probe deferral
<3>[    2.596149]@6 msm_cci_get_clk_info: clock-names[0][0] =
camss_top_ahb_clk
<3>[    2.596158]@6 msm_cci_get_clk_info: clk_rate[0][0] = -1
<3>[    2.596165]@6 msm_cci_get_clk_info: clock-names[0][1] = cci_src_clk
<3>[    2.596172]@6 msm_cci_get_clk_info: clk_rate[0][1] = 19200000
<3>[    2.596180]@6 msm_cci_get_clk_info: clock-names[0][2] = cci_ahb_clk
<3>[    2.596186]@6 msm_cci_get_clk_info: clk_rate[0][2] = -1
<3>[    2.596194]@6 msm_cci_get_clk_info: clock-names[0][3] = camss_cci_clk
<3>[    2.596200]@6 msm_cci_get_clk_info: clk_rate[0][3] = -1
<3>[    2.596207]@6 msm_cci_get_clk_info: clock-names[0][4] = camss_ahb_clk
<3>[    2.596212]@6 msm_cci_get_clk_info: clk_rate[0][4] = -1
<3>[    2.596218]@6 msm_cci_get_clk_info: clock-names[1][0] =
camss_top_ahb_clk
<3>[    2.596224]@6 msm_cci_get_clk_info: clk_rate[1][0] = -1
<3>[    2.596231]@6 msm_cci_get_clk_info: clock-names[1][1] = cci_src_clk
<3>[    2.596237]@6 msm_cci_get_clk_info: clk_rate[1][1] = 37500000
<3>[    2.596243]@6 msm_cci_get_clk_info: clock-names[1][2] = cci_ahb_clk
<3>[    2.596250]@6 msm_cci_get_clk_info: clk_rate[1][2] = -1
<3>[    2.596256]@6 msm_cci_get_clk_info: clock-names[1][3] = camss_cci_clk
<3>[    2.596262]@6 msm_cci_get_clk_info: clk_rate[1][3] = -1
<3>[    2.596269]@6 msm_cci_get_clk_info: clock-names[1][4] = camss_ahb_clk
<3>[    2.596275]@6 msm_cci_get_clk_info: clk_rate[1][4] = -1
<3>[    2.603270]@6 adp1660 i2c_add_driver success
<3>[    2.604531]@6 msm_flash_lm3642_init entry
<6>[    2.610765]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 24 buf = ffffffc0d2693b88 length = 4
<6>[    2.610775]@6 laser_sensor_offset = 0
<6>[    2.610783]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 28 buf = ffffffc0d2693b8c length = 4
<6>[    2.610790]@6 laser_sensor_cross_talk = 5
<6>[    2.611645]@6 msm_cci_init:1292: hw_version = 0x10020000
<3>[    2.650490]@6 msm_cci_irq:1593 MASTER_0 error 0x10000000
<3>[    2.650565]@6 msm_cci_i2c_read:834 read_words = 0, exp words = 1
<3>[    2.650575]@6 msm_cci_i2c_read_bytes:917 failed rc -22
<3>[    2.650583]@6 msm_camera_cci_i2c_read: line 48 rc = -22
<3>[    2.650589]@6 Not found STM VL6180
<3>[    2.650807]@6 stmvl6180_platform_probe:1351 failed rc -5
<4>[    2.650834]@6 stmv,vl6180: probe of 29.qcom,proximity failed with
error -5
<3>[    2.650903]@6 stmvl6180_init:1666 platform device register failed,
try to register as I2C device
<6>[    2.651233]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 24 buf = ffffffc0d2693bb8 length = 4
<6>[    2.651241]@6 laser_sensor_offset = 0
<6>[    2.651249]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 28 buf = ffffffc0d2693bbc length = 4
<6>[    2.651256]@6 laser_sensor_cross_talk = 5
<6>[    2.686687]@6 msm_cci_init:1292: hw_version = 0x10020000
<3>[    2.686750]@6 qcom,slave-addr = 0xA0
<3>[    2.690455]@6 i2c-msm-v2 f9928000.i2c:
msm_bus_scale_register_client(mstr-id:86):0x16 (ok)
<3>[    2.691056]@6 STM VL6180 Found
<3>[    2.693001]@6 qcom,slave-addr = 0xA0
<4>[    2.692216]@6 STM VL6180 Serial Numbe:
0x72-0x55-0x9-0x1a-0xf0-0x6b-0x10-
<6>[    2.694246]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 24 buf = ffffffc0d2693b98 length = 4
<6>[    2.694255]@6 laser_sensor_offset = 0
<6>[    2.694265]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 28 buf = ffffffc0d2693b9c length = 4
<6>[    2.694272]@6 laser_sensor_cross_talk = 5
<6>[    2.697158]@6 input: STM VL6180 proximity sensor as
/devices/virtual/input/input2
<4>[    2.697456]@6 i2c-core: driver [vl6180] using legacy suspend method
<4>[    2.697463]@6 i2c-core: driver [vl6180] using legacy resume method
<3>[    2.698577]@6 qcom,slave-addr = 0xA0
<3>[    2.699862]@6 g_sctrl[0] ffffffc0ce10a300
<3>[    2.700858]@6 g_sctrl[2] ffffffc0ce10b480<6>[    2.700917]@6
mt9m114_init_module:1158
<3>[    2.701847]@6 mt9m114_init_module:1163 rc -19
<6>[    2.702720]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[0] = -1
<6>[    2.702729]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[1] =
465000000
<6>[    2.702737]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[2] = -1
<6>[    2.702744]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[3] = -1
<6>[    2.702752]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[4] =
465000000
<6>[    2.702760]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[5] = -1
<6>[    2.702768]@6 MSM-CPP msm_cpp_get_clk_info:3450 clk_rate[6] = -1
<3>[    2.702778]@6 MSM-CPP cpp_probe:3572 Bus master 0
<6>[    2.717876]@6 MSM-CPP cpp_init_hardware:1105 CPP HW Version:
0x50000000
<3>[    2.717900]@6 MSM-CPP cpp_init_hardware:1126 stream_cnt:0
<3>[    2.725008]@6 __msm_jpeg_init:1525] Jpeg Device id 0
<3>[    2.725639]@6 __msm_jpeg_init:1525] Jpeg Device id
1__msm_jpeg_init:1525] Jpeg Device id 2
<3>[    2.726596]@6 __msm_jpeg_init:1525] Jpeg Device id 3<6>[
2.730599]@6 usbcore: registered new interface driver uvcvideo
<6>[    2.730607]@6 USB Video Class driver (1.1.1)
<3>[    2.732218]@6 load_data: chip is NULL !
<6>[    2.732314]@6 FG: get_batt_id: qpnp-fg battery_id_uv= -22
<6>[    2.732322]@6 FG: get_batt_id: qpnp-fg battery_id_ohm= 286331151
<3>[    2.732499]@6 qcom,slave-addr = 0xA0
<3>[    2.733148]@6 load_data: chip is NULL !
<6>[    2.733225]@6 FG: get_batt_id: qpnp-fg battery_id_uv= -22
<6>[    2.733233]@6 FG: get_batt_id: qpnp-fg battery_id_ohm= 286331151
<6>[    2.733387]@6 FG: fg_probe: fg_probe == redetect battery ID rc = 0
<6>[    2.733399]@6 FG: fg_probe: probe success
<6>[    2.733650]@6 spmi qpnp-smbcharger-ffffffc0d15e9b80: Driver
qpnp-smbcharger requests probe deferral
<6>[    2.734338]@6 Set dload mode:true
<3>[    2.766422]@6 qcom,slave-addr = 0xA0
<6>[    2.770854]@6 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15)
initialised: dm-devel@redhat.com
<6>[    2.771152]@6 device-mapper: req-crypt: dm-req-crypt successfully
initalized.
<6>[    2.771152]@6
<4>[    2.771920]@6 bt_power bt_qca6174.85: no qca,bt-vdd-pa-voltage-level
property
<6>[    2.771931]@6 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided
in device tree
<6>[    2.771939]@6 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided
in device tree
<6>[    2.772886]@6 cpuidle: using governor ladder
<6>[    2.772895]@6 cpuidle: using governor menu
<6>[    2.772968]@6 sdhci: Secure Digital Host Controller Interface driver
<6>[    2.772975]@6 sdhci: Copyright(c) Pierre Ossman
<6>[    2.772983]@6 sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    2.780084]@6 mmc0: no vqmmc regulator found
<6>[    2.780100]@6 mmc0: no vmmc regulator found
<6>[    2.780490]@6 mmc0: SDHCI controller on f9824900.sdhci
[f9824900.sdhci] using 32-bit ADMA
<3>[    2.800280]@6 qcom,slave-addr = 0xA0
<3>[    2.811000]@6 sdhci_msm f98a4900.sdhci: Failed to get slot index -19
<3>[    2.834184]@6 qcom,slave-addr = 0xA0
<4>[    2.860047]@6 boot_time: after optimize call [synaptics_ts_probe] on
cpu 0
<3>[    2.860060]@6 synaptics,s3320: synaptics_ts_probe  is called
<3>[    2.860274]@6 synaptics,s3320: synaptics_parse_dts
ts->support_hw_poweroff =0
<3>[    2.860287]@6 synaptics,s3320: button-map not specified
<3>[    2.860295]@6 synaptics,s3320: synaptics,tx-rx-num is 30 17
<3>[    2.860303]@6 synaptics,s3320: lcd size not specified
<4>[    2.860313]@6 synaptics,s3320: synaptic:ts->irq_gpio:974 irq_flags:8
max_num 10
<3>[    2.861055]@6 touchkey,s1302: boot_time: after optimize call
[synaptics_ts_probe] on cpu 0
<3>[    2.861066]@6 touchkey,s1302: synaptics_ts_probe  is called
<3>[    2.861270]@6 touchkey,s1302: create nodes is successe!
<3>[    2.861761]@6 touchkey,s1302: product id is s1302???P}0?????,?
<3>[    2.862184]@6 touchkey,s1302: F11_2D_QUERY_BASE = 95
<3>[    2.862184]@6  F11_2D_CMD_BASE  = 6e
<3>[    2.862184]@6 F11_2D_CTRL_BASE = 3d
<3>[    2.862184]@6 F11_2D_DATA_BASE = 15
<3>[    2.862184]@6
<3>[    2.863803]@6 touchkey,s1302: CURRENT_FIRMWARE_ID = 0x3
<3>[    2.864002]@6 touchkey,s1302: before fw update,bootloader_mode = 0x0
<6>[    2.864440]@6 input: synaptics,s1302 as
/devices/soc.0/f9928000.i2c/i2c-6/6-0020/input/input3
<6>[    2.880490]@6 mmc0: BKOPS_EN bit = 0
<6>[    2.896541]@6 mmc0: new HS400 MMC card at address 0001
<6>[    2.897635]@6 mmcblk0: mmc0:0001 CGND3R 58.2 GiB
<6>[    2.898018]@6 mmcblk0rpmb: mmc0:0001 CGND3R partition 3 4.00 MiB
<3>[    2.900565]@6 i2c-msm-v2 f9924000.i2c:
msm_bus_scale_register_client(mstr-id:86):0x18 (ok)
<3>[    2.900925]@6 i2c-msm-v2 f9924000.i2c: NACK: slave not responding,
ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO
slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
<4>[    2.901029]@6 Alternate GPT is invalid, using primary GPT.
<6>[    2.901137]@6  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32
p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43
<3>[    2.920024]@6 touchkey,s1302: synaptic:ts->irq is 505
<3>[    2.920755]@6 touchkey,s1302: synaptics_soft_reset !!!
<4>[    2.921043]@6 touchkey,s1302: synaptics_ts_probe s1302: normal end
<3>[    2.921051]@6 touchkey,s1302: boot_time: synaptics_ts_probe return 0
<3>[    2.930755]@6 synaptics,s3320: F12_2D_QUERY_BASE = 48
<3>[    2.930755]@6  F12_2D_CMD_BASE  = 0
<3>[    2.930755]@6 F12_2D_CTRL_BASE = 14
<3>[    2.930755]@6 F12_2D_DATA_BASE = 6
<3>[    2.930755]@6 synaptics:before fw update,bootloader_mode = 0x0
<3>[    2.932578]@6 synaptics,s3320: CURRENT_FIRMWARE_ID = 0x14049030
<6>[    2.935057]@6 usbcore: registered new interface driver usbhid
<6>[    2.935067]@6 usbhid: USB HID core driver
<4>[    2.935157]@6 buf[0] = 0x37, buf[1] = 0x4
<3>[    2.935166]@6 synaptics,s3320: max_x = 1080,max_y = 1920
<3>[    2.935166]@6  max_x_ic = 1079,max_y_ic = 1919
<6>[    2.935802]@6 zram: Created 1 device(s) ...
<3>[    2.936063]@6 synaptics,s3320: synaptics_soft_reset !!!
<6>[    2.936768]@6 ashmem: initialized
<6>[    2.937106]@6 logger: created 256K log 'log_main'
<6>[    2.937470]@6 logger: created 256K log 'log_events'
<6>[    2.937790]@6 logger: created 256K log 'log_radio'
<6>[    2.938092]@6 logger: created 256K log 'log_system'
<6>[    2.939213]@6 sps:BAM 0x00000000f9304000 is registered.
<6>[    2.940051]@6 qcom,qpnp-power-on qpnp-power-on-ffffffc0d15a4d00:
PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
<6>[    2.940076]@6 qcom,qpnp-power-on qpnp-power-on-ffffffc0d15a4d00:
PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled
shutdown)
<6>[    2.940425]@6 input: qpnp_pon as /devices/virtual/input/input4
<6>[    2.941882]@6 qcom,qpnp-power-on qpnp-power-on-ffffffc0d15e8b00: No
PON config. specified
<6>[    2.941921]@6 qcom,qpnp-power-on qpnp-power-on-ffffffc0d15e8b00:
PMIC@SID2 Power-on reason: Triggered from Hard Reset and 'cold' boot
<6>[    2.941942]@6 qcom,qpnp-power-on qpnp-power-on-ffffffc0d15e8b00:
PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled
shutdown)
<6>[    2.942218]@6 qpnp_coincell_charger_show_state: enabled=Y,
voltage=3200 mV, resistance=2100 ohm
<6>[    2.943296]@6 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
<6>[    2.943428]@6 PMIC@SID2: PMI8994 v2.0.4 options: 0, 0, 0, 0
<6>[    2.944083]@6 pft [pft_init]: Drivr initialized successfully Aug 31
2015 13:17:52.n
<6>[    2.949655]@6 clock-cpu-8994: OPP tables populated (cpu 3 and 7)
<6>[    2.949668]@6 clock_cpu: a53: OPP voltage for 384000000: 815000
<6>[    2.949675]@6 clock_cpu: a53: OPP voltage for 1555200000: 1125000
<6>[    2.949682]@6 clock_cpu: a57: OPP voltage for 384000000: 830000
<6>[    2.949689]@6 clock_cpu: a57: OPP voltage for 1766400000: 1040000
<6>[    2.951745]@6 bimc-bwmon fc388000.qcom,cpu-bwmon: BW HWmon governor
registered.
<6>[    2.952050]@6 bimc-bwmon fc390000.qcom,gpu-bwmon: BW HWmon governor
registered.
<3>[    2.954395]@6 devfreq qcom,cpubw.33: Couldn't update frequency
transition information.
<3>[    2.954799]@6 devfreq qcom,mincpubw.34: Couldn't update frequency
transition information.
<6>[    2.957915]@6 msm_cci_init:1292: hw_version = 0x10020000
<3>[    2.957973]@6 qcom,slave-addr = 0x6C
<6>[    2.959172]@6 coresight-fuse fc4be024.fuse: QPDI fuse not specified
<6>[    2.959286]@6 coresight-fuse fc4be024.fuse: Fuse initialized
<6>[    2.959939]@6 coresight-cti fc310000.cti: CTI initialized
<6>[    2.960238]@6 coresight-cti fc311000.cti: CTI initialized
<6>[    2.960554]@6 coresight-cti fc312000.cti: CTI initialized
<6>[    2.960776]@6 coresight-cti fc313000.cti: CTI initialized
<6>[    2.961015]@6 coresight-cti fc314000.cti: CTI initialized
<6>[    2.961273]@6 coresight-cti fc315000.cti: CTI initialized
<6>[    2.961737]@6 coresight-cti fc316000.cti: CTI initialized
<6>[    2.961949]@6 coresight-cti fc317000.cti: CTI initialized
<6>[    2.962342]@6 coresight-cti fc318000.cti: CTI initialized
<6>[    2.962612]@6 coresight-cti fb820000.cti: CTI initialized
<6>[    2.962870]@6 coresight-cti fb920000.cti: CTI initialized
<6>[    2.963135]@6 coresight-cti fba20000.cti: CTI initialized
<6>[    2.963376]@6 coresight-cti fbb20000.cti: CTI initialized
<6>[    2.963622]@6 coresight-cti fbc20000.cti: CTI initialized
<6>[    2.963899]@6 coresight-cti fbd20000.cti: CTI initialized
<6>[    2.964185]@6 coresight-cti fbe20000.cti: CTI initialized
<6>[    2.964444]@6 coresight-cti fbf20000.cti: CTI initialized
<6>[    2.964739]@6 coresight-cti fc338000.cti: CTI initialized
<6>[    2.964984]@6 coresight-cti fc33c000.cti: CTI initialized
<6>[    2.965211]@6 coresight-cti fc360000.cti: CTI initialized
<6>[    2.965459]@6 coresight-cti fc364000.cti: CTI initialized
<6>[    2.966151]@6 coresight-csr fc301000.csr: CSR initialized
<6>[    2.966767]@6 coresight-tmc fc326000.tmc: Byte Counter feature enabled
<6>[    2.966803]@6 sps:BAM 0x00000000fc37c000 is registered.
<6>[    2.967124]@6 coresight-tmc fc326000.tmc: TMC initialized
<6>[    2.967746]@6 coresight-tmc fc325000.tmc: TMC initialized
<6>[    2.968655]@6 coresight-tpiu fc320000.tpiu: TPIU initialized
<6>[    2.969271]@6 coresight-funnel fc323000.funnel: FUNNEL initialized
<6>[    2.969475]@6 coresight-funnel fc321000.funnel: FUNNEL initialized
<6>[    2.969708]@6 coresight-funnel fc322000.funnel: FUNNEL initialized
<6>[    2.969935]@6 coresight-funnel fbb70000.funnel: FUNNEL initialized
<3>[    2.969991]@6 qcom,slave-addr = 0x6C
<6>[    2.970191]@6 coresight-funnel fbb60000.funnel: FUNNEL initialized
<6>[    2.970425]@6 coresight-funnel fc370000.funnel: FUNNEL initialized
<6>[    2.971050]@6 coresight-replicator fc324000.replicator: REPLICATOR
initialized
<6>[    2.971719]@6 coresight-tpda fbb91000.tpda: TPDA initialized
<6>[    2.972352]@6 coresight-tpdm fbb90000.tpdm: TPDM initialized
<6>[    2.973035]@6 coresight-stm fc302000.stm: STM initialized
<6>[    2.973634]@6 coresight-hwevent fd828018.hwevent: Hardware Event
driver initialized
<6>[    2.974512]@6 coresight-etmv4 fb840000.etm: ETMv4 initialized
<6>[    2.975059]@6 coresight-etmv4 fb940000.etm: ETMv4 initialized
<6>[    2.975515]@6 coresight-etmv4 fba40000.etm: ETMv4 initialized
<6>[    2.976028]@6 coresight-etmv4 fbb40000.etm: ETMv4 initialized
<6>[    2.976524]@6 coresight-etmv4 fbc40000.etm: ETMv4 initialized
<6>[    2.976985]@6 coresight-etmv4 fbd40000.etm: ETMv4 initialized
<6>[    2.978412]@6 coresight-audio-etm audio_etm0.73: Audio ETM initialized
<6>[    2.979418]@6 coresight-modem-etm modem_etm0.74: Modem ETM initialized
<3>[    2.979995]@6 qcom,slave-addr = 0x6C
<6>[    2.980341]@6 coresight-wcn-etm wcn_etm0.75: Wireless ETM initialized
<6>[    2.981295]@6 coresight-rpm-etm rpm_etm0.76: RPM ETM initialized
<6>[    2.982198]@6 otracer: initialized
<6>[    2.982555]@6 usbcore: registered new interface driver snd-usb-audio
<3>[    2.989986]@6 qcom,slave-addr = 0x6C
<6>[    2.995738]@6 msm-compr-dsp qcom,msm-compr-dsp.43: msm_compr_probe:
dev name qcom,msm-compr-dsp.43
<6>[    2.996164]@6 msm-pcm-lpa qcom,msm-pcm-lpa.39: msm_pcm_probe: dev
name qcom,msm-pcm-lpa.39
<6>[    2.996932]@6 platform qcom,msm-voip-dsp.45: Driver msm-voip-dsp
requests probe deferral
<6>[    2.997306]@6 platform qcom,msm-pcm-voice.46: Driver msm-pcm-voice
requests probe deferral
<3>[    2.999983]@6 qcom,slave-addr = 0x6C
<6>[    3.003897]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.005671]@6 msm8994-asoc-snd fe034000.sound: ASoC: platform (null)
not registered
<6>[    3.005774]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.006535]@6 u32 classifier
<6>[    3.006541]@6     Actions configured
<6>[    3.006550]@6 Netfilter messages via NETLINK v0.30.
<6>[    3.006652]@6 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    3.007298]@6 ctnetlink v0.93: registering with nfnetlink.
<6>[    3.007599]@6 NF_TPROXY: Transparent proxy support initialized,
version 4.1.0
<6>[    3.007605]@6 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    3.008354]@6 xt_time: kernel timezone is -0000
<6>[    3.008607]@6 ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.008951]@6 arp_tables: (C) 2002 David S. Miller
<6>[    3.009079]@6 TCP: cubic registered
<6>[    3.009085]@6 Initializing XFRM netlink socket
<3>[    3.009987]@6 qcom,slave-addr = 0x6C
<6>[    3.010247]@6 NET: Registered protocol family 10
<6>[    3.011920]@6 mip6: Mobile IPv6
<6>[    3.011971]@6 ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.012315]@6 sit: IPv6 over IPv4 tunneling driver
<6>[    3.012939]@6 NET: Registered protocol family 17
<6>[    3.012977]@6 NET: Registered protocol family 15
<5>[    3.013226]@6 Bridge firewalling registered
<6>[    3.013240]@6 Ebtables v2.0 registered
<6>[    3.013580]@6 Bluetooth: RFCOMM TTY layer initialized
<6>[    3.013635]@6 Bluetooth: RFCOMM socket layer initialized
<6>[    3.013642]@6 Bluetooth: RFCOMM ver 1.11
<6>[    3.013650]@6 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    3.013656]@6 Bluetooth: BNEP filters: protocol multicast
<6>[    3.013677]@6 Bluetooth: BNEP socket layer initialized
<6>[    3.013683]@6 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.013701]@6 Bluetooth: HIDP socket layer initialized
<6>[    3.013752]@6 l2tp_core: L2TP core driver, V2.0
<6>[    3.013772]@6 l2tp_ppp: PPPoL2TP kernel driver, V2.0
<6>[    3.013778]@6 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[    3.013958]@6 l2tp_netlink: L2TP netlink interface
<6>[    3.014033]@6 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[    3.014071]@6 l2tp_debugfs: L2TP debugfs support
<6>[    3.014076]@6 l2tp_ip6: L2TP IP encapsulation support for IPv6
(L2TPv3)
<6>[    3.014888]@6 bt_vreg: no parameters
<6>[    3.015740]@6 usb_otg_vreg: no parameters
<3>[    3.015861]@6 reg-fixed-voltage usb-otg-switch.68: Failed to find
supply vin
<3>[    3.016041]@6 reg-fixed-voltage usb-otg-switch.68: Failed to register
regulator: -517
<6>[    3.016082]@6 platform usb-otg-switch.68: Driver reg-fixed-voltage
requests probe deferral
<3>[    3.029996]@6 qcom,slave-addr = 0x6C
<3>[    3.031307]@6 qcom,slave-addr = 0x6C
<6>[    3.040490]@6 input: synaptics,s3320 as
/devices/soc.0/f9924000.i2c/i2c-2/2-0020/input/input5
<3>[    3.050318]@6 cnss_wlan_get_resources: Can't get GPIO-1 -2, ret = 0
<3>[    3.050351]@6 cnss_wlan_get_resources: Can't get GPIO-2 -2, ret =
0<6>[    3.060432]@6 msm_pcie_enable: PCIe: Assert the reset of endpoint of
RC1.
<6>[    3.065201]@6 msm_pcie_enable: PCIe RC1 PHY is ready!
<6>[    3.075250]@6 msm_pcie_enable: PCIe: Release the reset of endpoint of
RC1.
<3>[    3.100001]@6 synaptics,s3320: synaptic:ts->irq is 503
<6>[    3.117346]@6 msm_pcie_enable: PCIe RC1 link initialized
<6>[    3.117785]@6 PCI host bridge to bus 0001:00
<6>[    3.117802]@6 pci_bus 0001:00: root bus resource [io
0xf8880000-0xf88fffff]
<6>[    3.117817]@6 pci_bus 0001:00: root bus resource [mem
0xf8900000-0xf8ffffff]
<6>[    3.117827]@6 pci_bus 0001:00: No busn resource found for root bus,
will use [bus 00-ff]
<7>[    3.117927]@6 pci 0001:00:00.0: [17cb:0300] type 01 class 0x060400
<3>[    3.118013]@6 msm_pcie_oper_conf: Read of RC1 0:0x00 + 0x0014[4] is
all FFs
<7>[    3.118034]@6 pci 0001:00:00.0: reg 10: [mem 0x00000000-0x000fffff
64bit]
<7>[    3.118294]@6 pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
<6>[    3.118891]@6 PCI: bus0: Fast back to back transfers disabled
<6>[    3.118908]@6 pci 0001:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
<7>[    3.119401]@6 pci 0001:01:00.0: [168c:003e] type 00 class 0x028000
<3>[    3.119506]@6 msm_pcie_oper_conf: Read of RC1 1:0x00 + 0x0014[4] is
all FFs
<7>[    3.119529]@6 pci 0001:01:00.0: reg 10: [mem 0x00000000-0x001fffff
64bit]
<7>[    3.120073]@6 pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
<6>[    3.120906]@6 PCI: bus1: Fast back to back transfers disabled
<7>[    3.120919]@6 pci_bus 0001:01: busn_res: [bus 01-ff] end is updated
to 01
<7>[    3.120952]@6 pci_bus 0001:00: busn_res: [bus 00-ff] end is updated
to 01
<3>[    3.121192]@6 msm_pcie_oper_conf: Read of RC1 0:0x00 + 0x0028[4] is
all FFs
<6>[    3.121228]@6 pci 0001:00:00.0: BAR 8: assigned [mem
0xf8a00000-0xf8bfffff]
<6>[    3.121239]@6 pci 0001:00:00.0: BAR 0: assigned [mem
0xf8900000-0xf89fffff 64bit]
<6>[    3.121341]@6 pci 0001:01:00.0: BAR 0: assigned [mem
0xf8a00000-0xf8bfffff 64bit]
<6>[    3.121587]@6 pci 0001:00:00.0: PCI bridge to [bus 01]
<6>[    3.121626]@6 pci 0001:00:00.0:   bridge window [mem
0xf8a00000-0xf8bfffff]
<6>[    3.122728]@6 get_param_by_index_and_offset[75]  sid_index = 10
offset = 24 buf = ffffffc001729134 length = 4
<6>[    3.122738]@6 cnss evmFlag = 0
<6>[    3.130057]@6 msm_pcie_disable: PCIe: Assert the reset of endpoint of
RC1.
<4>[    3.278844]@6 synaptics,s3320: synaptics_ts_probe 3203: normal end
<4>[    3.278855]@6 boot_time: synaptics_ts_probe return 0
<6>[    3.282368]@6 cnss: Platform driver probed successfully.
<4>[    3.283008]@6 switch_theme_probe
<4>[    3.283034]@6 switch_theme_get_devtree_pdata, node name:switch_theme
, /soc/switch_theme
<4>[    3.283065]@6 switch_theme_get_devtree_pdata, irq gpio:944
<4>[    3.283084]@6 switch_theme_get_devtree_pdata, switch gpio:864
<4>[    3.283349]@6 switch_theme_probe
gpio_get_value(944)=0cover_switch_work
<6>[    3.368630]@6 FG: fg_set_resume_soc: setting resume-soc to fc
<6>[    3.370431]@6 FG: fg_hw_init: set default value to esr filter
<6>[    3.371802]@6 FG: get_batt_id: qpnp-fg battery_id_uv= 156800
<6>[    3.371809]@6 FG: get_batt_id: qpnp-fg battery_id_ohm= 1045
<6>[    3.371822]@6 of_batterydata_get_best_profile: ATL found
<4>[    3.387260]@6 cover_switch_work,read cover adc =1992021 uV
<4>[    3.387268]@6 cover_switch_work,read cover adc =1992 mV
<4>[    3.387274]@6 cover_switch_work,cover_type(0) --->(3)
<4>[    3.388381]@6 cover_switch_work OK
<3>[    3.392817]@6 qpnp-smbcharger qpnp-smbcharger-ffffffc0d15e9b80: node
/soc/qcom,spmi@fc4c0000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource
absent!
<6>[    3.393061]@6 smbcharger_charger_otg: no parameters
<6>[    3.393327]@6 smbcharger_external_otg: no parameters
<6>[    3.393359]@6 smbcharger_external_otg: supplied by pmi8994_boost_5v
<6>[    3.450085]@6 msm_bam_device_lpm_ok: Going to LPM now
<3>[    3.450776]@6 load_data: chip is NULL !
<6>[    3.453261]@6 msm-dwc3 f9200000.ssusb: DWC3 in low power mode
<3>[    3.466751]@6 load_data: chip is NULL !
<3>[    3.473779]@6 qpnp-smbcharger qpnp-smbcharger-ffffffc0d15e9b80: node
/soc/qcom,spmi@fc4c0000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource
absent!
<3>[    3.473862]@6 load_data: chip is NULL !
<3>[    3.474134]@6 load_data: chip is NULL !
<6>[    3.475054]@6 qpnp-smbcharger qpnp-smbcharger-ffffffc0d15e9b80:
SMBCHG successfully probed batt=1 dc = 0 usb = 0
<6>[    3.477895]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.478237]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.478341]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.478677]@6 usb_otg_vreg: no parameters
<6>[    3.478720]@6 usb_otg_vreg: supplied by smbcharger_external_otg
<6>[    3.480740]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.481039]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.481128]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.482299]@6 EDAC DEVICE0: Giving out device to module
'f9100000.arm64-cpu-erp' controller 'cache': DEV 'f9100000.arm64-cpu-erp'
(POLLED)
<5>[    3.484123]@6 Registering SWP/SWPB emulation handler
<6>[    3.546573]@6 project_info_init_sysfs success
<6>[    3.546656]@6 usb_otg_vreg: disabling
<6>[    3.546693]@6 bt_vreg: disabling
<6>[    3.546801]@6 lab_reg: disabling
<6>[    3.550971]@6 mem_acc1_corner: disabling
<6>[    3.550978]@6 mem_acc0_corner: disabling
<6>[    3.550985]@6 regulator-dummy: disabling
<6>[    3.554825]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.555319]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.555474]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.557772]@6 RNDIS_IPA module is loaded.
<6>[    3.558704]@6 file system registered
<6>[    3.558857]@6 mbim_init: initialize 1 instances
<6>[    3.558996]@6 mbim_init: Initialized 1 ports
<6>[    3.559002]@6 mbim_bam_setup: no_ports:1
<6>[    3.559276]@6 mbim_bam_setup: Initialized 1 ports
<6>[    3.559947]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.560446]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.560610]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.561367]@6 rndis_qc_init: initialize rndis QC instance
<6>[    3.562180]@6 android_usb gadget: Mass Storage Function, version:
2009/09/11
<6>[    3.562188]@6 android_usb gadget: Number of LUNs=1
<6>[    3.562200]@6  lun0: LUN: read only CD-ROM file: (no medium)
<6>[    3.562739]@6 android_usb gadget: android_usb ready
<6>[    3.577838]@6 msm-dwc3 f9200000.ssusb: DWC3 exited from low power mode
<6>[    3.577910]@6 msm_bam_device_lpm_ok: Going to LPM now
<6>[    3.581079]@6 msm-dwc3 f9200000.ssusb: DWC3 in low power mode
<6>[    3.581265]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<6>[    3.581569]@6 input: gpio-keys as
/devices/soc.0/gpio_keys.81/input/input6
<3>[    3.581752]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.581909]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.582030]@6 qcom,qpnp-rtc qpnp-rtc-ffffffc0d15e8000: setting system
clock to 1970-01-02 02:51:48 UTC (96708)
<3>[    3.583177]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<6>[    3.584792]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.585328]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.585471]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.588012]@6 msm_thermal:interrupt_mode_init Interrupt mode init
<6>[    3.589016]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.589501]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.589637]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.590620]@6 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_IA57]
<6>[    3.591222]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-0]
<6>[    3.591637]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-1]
<6>[    3.591998]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<6>[    3.592076]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-2]
<3>[    3.592333]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.592446]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.592510]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_57-3]
<6>[    3.592953]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-0]
<6>[    3.593388]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-1]
<6>[    3.593797]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-2]
<6>[    3.594217]@6 lmh_lite:lmh_parse_sensor Registering sensor:[THRM_53-3]
<6>[    3.596786]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.597153]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.597254]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.603488]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<6>[    3.603689]@6 rmnet_ipa started initialization
<6>[    3.603697]@6 IPA SSR support = True
<6>[    3.603704]@6 IPA ipa-loaduC = True
<3>[    3.603860]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.603942]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.608524]@6 rmnet_ipa completed initialization
<6>[    3.611726]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.612207]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.612338]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.616353]@6 qcom,cc-debug-8994 fc401880.qcom,cc-debug: Registered
debug mux.
<6>[    3.618184]@6 regulator_proxy_consumer_remove_all: removing regulator
proxy consumer requests
<6>[    3.619564]@6 clock_late_init: Removing enables held for handed-off
clocks
<6>[    3.619690]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    3.620352]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    3.620527]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    3.631549]@6 ALSA device list:
<6>[    3.631556]@6   No soundcards found.
<3>[    3.631671]@6 Warning: unable to open an initial console.
<6>[    3.632436]@6 Freeing unused kernel memory: 1444K (ffffffc00110d000 -
ffffffc001276000)
<7>[    3.656906]@6 SELinux: 2048 avtab hash slots, 8602 rules.
<7>[    3.676742]@6 SELinux: 2048 avtab hash slots, 8602 rules.
<7>[    3.676915]@6 SELinux:  1 users, 2 roles, 700 types, 0 bools, 1 sens,
1024 cats
<7>[    3.676922]@6 SELinux:  86 classes, 8602 rules
<7>[    3.682850]@6 SELinux:  Completing initialization.
<7>[    3.682856]@6 SELinux:  Setting up existing superblocks.
<7>[    3.682874]@6 SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
<7>[    3.682890]@6 SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
<7>[    3.683014]@6 SELinux: initialized (dev bdev, type bdev), not
configured for labeling
<7>[    3.683031]@6 SELinux: initialized (dev proc, type proc), uses
genfs_contexts
<7>[    3.683059]@6 SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
<7>[    3.683078]@6 SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
<7>[    3.698742]@6 SELinux: initialized (dev sockfs, type sockfs), uses
task SIDs
<7>[    3.698756]@6 SELinux: initialized (dev pipefs, type pipefs), uses
task SIDs
<7>[    3.698766]@6 SELinux: initialized (dev anon_inodefs, type
anon_inodefs), not configured for labeling
<7>[    3.698778]@6 SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
<7>[    3.698799]@6 SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
<7>[    3.698890]@6 SELinux: initialized (dev configfs, type configfs), not
configured for labeling
<7>[    3.698900]@6 SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
<7>[    3.698929]@6 SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
<3>[    3.700027]@6 ipa ipa_uc_state_check:246 uC is not loaded
<5>[    3.820680]@6 type=1403 audit(96708.729:2): policy loaded
auid=4294967295 ses=4294967295
<5>[    3.828090]@6 type=1404 audit(96708.729:3): enforcing=1
old_enforcing=0 auid=4294967295 ses=4294967295
<11>[    4.226052]@6 init: Normal boot or recovery
<11>[    4.227153]@6 init: /init.qcom.rc: 548: user option requires a user
id
<3>[    4.231352]@6 qcrypto_module: version magic '3.10.49-perf-g37352a8
SMP preempt mod_unload modversions aarch64' should be '3.10.49-Sandykernel
SMP preempt mod_unload aarch64'
<3>[    4.232074]@6 qdrbg_module: version magic '3.10.49-perf-g37352a8 SMP
preempt mod_unload modversions aarch64' should be '3.10.49-Sandykernel SMP
preempt mod_unload aarch64'
<3>[    4.452336]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<3>[    4.583629]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<6>[    4.583720]@6 FG: get_batt_id: qpnp-fg battery_id_uv= 156800
<6>[    4.583728]@6 FG: get_batt_id: qpnp-fg battery_id_ohm= 1045
<3>[    4.821309]@6 SMBCHG: smbchg_battchg_en: chg_en
smbchg_battchg_en:enable =0
<3>[    4.821321]@6 SMBCHG: smbchg_charging_en: chg_en
smbchg_charging_en:en =0
<3>[    4.821364]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<3>[    4.821425]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<3>[    4.821464]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<6>[    4.821558]@6 FG: get_batt_id: qpnp-fg battery_id_uv= 156800
<6>[    4.821564]@6 FG: get_batt_id: qpnp-fg battery_id_ohm= 1045
<3>[    4.822050]@6 load_data: stored_soc[0x81], shutdown_soc[64]
<7>[    5.020768]@6 SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
<7>[    5.021667]@6 SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
<7>[    5.025742]@6 SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
<7>[    5.026154]@6 SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
<7>[    5.029605]@6 SELinux: initialized (dev cgroup, type cgroup), uses
genfs_contexts
<7>[    5.032782]@6 SELinux: initialized (dev pstore, type pstore), uses
genfs_contexts
<7>[    5.044725]@6 SELinux: initialized (dev functionfs, type functionfs),
uses genfs_contexts
<6>[    5.118476]@6 EXT4-fs (mmcblk0p42): mounted filesystem with ordered
data mode. Opts: barrier=1,discard
<7>[    5.118519]@6 SELinux: initialized (dev mmcblk0p42, type ext4), uses
xattr
<14>[    5.118687]@6 fs_mgr:
__mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
<4>[    5.119691]@6 EXT4-fs (mmcblk0p43): Ignoring removed nomblk_io_submit
option
<6>[    5.125881]@6 EXT4-fs (mmcblk0p43): mounted filesystem with ordered
data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    5.125925]@6 SELinux: initialized (dev mmcblk0p43, type ext4), uses
xattr
<14>[    5.126039]@6 fs_mgr: check_fs():
mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0
<14>[    5.140447]@6 fs_mgr: Running /system/bin/e2fsck on
/dev/block/bootdevice/by-name/userdata
<4>[    5.235621]@6 e2fsck (360) used greatest stack depth: 11480 bytes left
<14>[    5.235809]@6 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<14>[    5.235880]@6 e2fsck: /dev/block/bootdevice/by-name/userdata: clean,
5239/3604480 files, 1584139/14415850 blocks
<6>[    5.242565]@6 EXT4-fs (mmcblk0p43): mounted filesystem with ordered
data mode. Opts: barrier=1,noauto_da_alloc,discard
<7>[    5.242607]@6 SELinux: initialized (dev mmcblk0p43, type ext4), uses
xattr
<14>[    5.242728]@6 fs_mgr:
__mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
<6>[    5.247167]@6 EXT4-fs (mmcblk0p41): mounted filesystem with ordered
data mode. Opts: barrier=1
<7>[    5.247196]@6 SELinux: initialized (dev mmcblk0p41, type ext4), uses
xattr
<6>[    5.250959]@6 EXT4-fs (mmcblk0p37): mounted filesystem with ordered
data mode. Opts: barrier=1
<7>[    5.250979]@6 SELinux: initialized (dev mmcblk0p37, type ext4), uses
xattr
<7>[    5.260625]@6 SELinux: initialized (dev mmcblk0p1, type vfat), uses
mountpoint labeling
<7>[    5.268154]@6 SELinux: initialized (dev mmcblk0p2, type vfat), uses
genfs_contexts
<11>[    5.329040]@6 init: Detected MSM SOC ID=207 SOC VER=0 BOARD TYPE=MTP
<11>[    5.329270]@6 init: failed to open
'/sys/class/graphics/fb2/msm_fb_type'
<11>[    5.330156]@6 init: found stm sensor
<11>[    5.339414]@6 init: property 'persist.sys.ssr.enable_debug' doesn't
exist while expanding '${persist.sys.ssr.enable_debug}'
<11>[    5.339436]@6 init: cannot expand '${persist.sys.ssr.enable_debug}'
while writing to '/sys/module/subsystem_restart/parameters/enable_debug'
<11>[    5.339455]@6 init: property 'persist.sys.mba_boot_timeout' doesn't
exist while expanding '${persist.sys.mba_boot_timeout}'
<11>[    5.339469]@6 init: cannot expand '${persist.sys.mba_boot_timeout}'
while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms'
<11>[    5.339488]@6 init: property 'persist.sys.modem_auth_timeout'
doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
<11>[    5.339502]@6 init: cannot expand
'${persist.sys.modem_auth_timeout}' while writing to
'/sys/module/pil_msa/parameters/modem_auth_timeout_ms'
<11>[    5.339520]@6 init: property 'persist.sys.pil_proxy_timeout' doesn't
exist while expanding '${persist.sys.pil_proxy_timeout}'
<11>[    5.339534]@6 init: cannot expand '${persist.sys.pil_proxy_timeout}'
while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms'
<6>[    5.344019]@6 subsys-pil-tz fe200000.qcom,lpass: adsp: loading from
0x000000000ca00000 to 0x000000000e200000
<6>[    5.603801]@6 subsys-pil-tz fe200000.qcom,lpass: adsp: Brought out of
reset
<6>[    5.646452]@6 subsys-pil-tz fe200000.qcom,lpass: adsp: Power/Clock
ready interrupt received
<3>[    5.647020]@6 L-Notify: Generel: 7
<6>[    5.686108]@6 subsys-pil-tz fe200000.qcom,lpass: Subsystem error
monitoring/handling services are up
<6>[    5.689146]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    5.689688]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    5.689801]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    5.693346]@6 apr_tal:Q6 Is Up
<6>[    5.693471]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    5.693949]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    5.694049]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    5.696725]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    5.697221]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    5.697329]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    5.808574]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    5.809060]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    5.809180]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    5.815474]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<3>[    5.815949]@6 msm8994-asoc-snd fe034000.sound: ASoC: CODEC
tomtom_codec not registered
<6>[    5.816091]@6 platform fe034000.sound: Driver msm8994-asoc-snd
requests probe deferral
<6>[    5.822457]@6 sps:BAM 0x00000000fe104000 (va:0xffffff8002980000)
enabled: ver:0x17, number of pipes:31
<6>[    5.830925]@6 tomtom-slim tomtom-slim-pgd: Platform data from device
tree
<6>[    5.831011]@6 tomtom-slim tomtom-slim-pgd: cdc-vdd-buck: vol=[2150000
2150000]uV, curr=[650000]uA, ond 0
<6>[    5.831034]@6 tomtom-slim tomtom-slim-pgd: cdc-vdd-tx-h: vol=[1800000
1800000]uV, curr=[25000]uA, ond 0
<6>[    5.831053]@6 tomtom-slim tomtom-slim-pgd: cdc-vdd-rx-h: vol=[1800000
1800000]uV, curr=[25000]uA, ond 0
<6>[    5.831072]@6 tomtom-slim tomtom-slim-pgd: cdc-vddpx-1: vol=[1800000
1800000]uV, curr=[10000]uA, ond 0
<6>[    5.831096]@6 tomtom-slim tomtom-slim-pgd: cdc-vdd-a-1p2v:
vol=[1200000 1200000]uV, curr=[2000]uA, ond 0
<6>[    5.831117]@6 tomtom-slim tomtom-slim-pgd: cdc-vddcx-1: vol=[1200000
1200000]uV, curr=[33000]uA, ond 0
<6>[    5.831137]@6 tomtom-slim tomtom-slim-pgd: cdc-vddcx-2: vol=[1200000
1200000]uV, curr=[33000]uA, ond 0
<6>[    5.831171]@6 tomtom-slim tomtom-slim-pgd: cdc-vdd-spkdrv:
vol=[5000000 5000000]uV, curr=[600000]uA, ond 1
<6>[    5.831195]@6 tomtom-slim tomtom-slim-pgd: cdc-vdd-spkdrv-2:
vol=[5000000 5000000]uV, curr=[600000]uA, ond 1
<3>[    5.831366]@6 extcodec_get_pinctrl: Unable to get pinctrl handle
<6>[    5.832254]@6 sps:BAM 0x00000000f9944000 (va:0xffffff8000de0000)
enabled: ver:0x17, number of pipes:24
<4>[    5.882081]@6 sh (395) used greatest stack depth: 11080 bytes left
<38>[    5.882133]@6 logd.auditd: start
<6>[    5.822474]@6 sps:BAM 0x00000000fe104000 is registered.
<6>[    5.891263]@6 slimbus:1 laddr:0xcd, EAPC:0x1:0x30<6>[    5.891319]@6
tomtom-slim tomtom-slim-pgd: wcd9xxx_slim_device_up: slim device up
<6>[    5.894333]@6 slimbus:1 laddr:0xcc, EAPC:0x0:0x30
<6>[    5.911342]@6 tomtom-slim tomtom-slim-pgd: wcd9xxx_check_codec_type:
detected tomtom_codec, major 0x105, minor 0x1, ver 0x2
<6>[    5.911366]@6 wcd9xxx_core_res_init: num_irqs = 32, num_irq_regs = 4
<6>[    5.917317]@6 msm8994-asoc-snd fe034000.sound:
msm8994_asoc_machine_probe: No hdmi audio support
<6>[    5.917321]@6 warning: `qseecomd' uses 32-bit capabilities (legacy
support in use)
<6>[    5.922643]@6 tomtom_codec tomtom_codec: tomtom_codec_probe()
<3>[    5.987764]@6 fpc1020 spi12.0: fpc1020_open
<3>[    5.987800]@6 fpc1020 spi12.0: fpc1020_release
<3>[    5.987852]@6 fpc1020 spi12.0: fpc1020_open
<3>[    5.987876]@6 fpc1020 spi12.0: fpc1020_release
<4>[    5.989805]@6 msm-pcm-routing qcom,msm-pcm-routing.42: ASoC: no dapm
match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
<3>[    5.989823]@6 msm-pcm-routing qcom,msm-pcm-routing.42: ASoC: Failed
to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
<6>[    5.991304]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 24 buf = ffffffc0d2693a78 length = 4
<6>[    5.991313]@6 laser_sensor_offset = 0
<6>[    5.991319]@6 get_param_by_index_and_offset[75]  sid_index = 5 offset
= 28 buf = ffffffc0d2693a7c length = 4
<6>[    5.991324]@6 laser_sensor_cross_talk = 5
<14>[    6.011754]@6 BEFORE: mtp
<3>[    6.013801]@6 msm-pcm-routing qcom,msm-pcm-routing.42: ASoC: mux
SLIM_0_RX AANC MUX has no paths
<4>[    6.015727]@6 msm-pcm-routing qcom,msm-pcm-routing.42: ASoC: Failed
to create TERT_MI2S_UL_HL debugfs file
<4>[    6.015774]@6 msm-pcm-routing qcom,msm-pcm-routing.42: ASoC: Failed
to create QUAT_MI2S_DL_HL debugfs file
<14>[    6.025441]@6 boot_mode:
<3>[    6.029277]@6 i2c-msm-v2 f9967000.i2c:
msm_bus_scale_register_client(mstr-id:84):0x29 (ok)
<6>[    6.030154]@6 tfa98xx 5-0036: ID revision 0x0080
<6>[    6.031033]@6 start update *******
fw_name:tp/14049/14049_FW_S3320_jdi.img
<14>[    6.039250]@6 AFTER: mtp
<6>[    6.052488]@6 tfa98xx 5-0036: tfa98xx codec registered
<3>[    6.054224]@6 msm-dai-q6-dev qcom,msm-dai-q6-sb-2-rx.187: ASoC: no
source widget found for SLIMBUS_2_RX
<3>[    6.054240]@6 msm-dai-q6-dev qcom,msm-dai-q6-sb-2-rx.187: ASoC:
Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
<3>[    6.054284]@6 msm-dai-q6-dev qcom,msm-dai-q6-sb-2-tx.188: ASoC: no
sink widget found for SLIMBUS_2_TX
<3>[    6.054294]@6 msm-dai-q6-dev qcom,msm-dai-q6-sb-2-tx.188: ASoC:
Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
<3>[    6.058968]@6 synaptics,s3320: CURRENT_FIRMWARE_ID is
14049030-----------, FIRMWARE_ID is 14049030-----------
<6>[    6.059127]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
MultiMedia1 mapping ok
<6>[    6.060421]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
MultiMedia2 mapping ok
<6>[    6.061829]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
CS-VOICE mapping ok
<3>[    6.062032]@6 touchkey,s1302: start update *******
fw_name:tp/14049/14049_FW_S1302.img
<6>[    6.063535]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
VoIP mapping ok
<6>[    6.068072]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
MultiMedia3 mapping ok
<6>[    6.069053]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
SLIMBUS0_HOSTLESS mapping ok
<3>[    6.070486]@6 touchkey,s1302: CURRENT_FIRMWARE_ID is 3-----------,
FIRMWARE_ID is 3-----------
<6>[    6.073500]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
PRI_MI2S_TX_HOSTLESS mapping ok
<6>[    6.075261]@6 msm8994-asoc-snd fe034000.sound:  msm-stub-rx <->
com,msm-dai-q6-afe-proxy-rx.200 mapping ok
<6>[    6.076093]@6 msm8994-asoc-snd fe034000.sound:  msm-stub-tx <->
qcom,msm-dai-q6-afe-proxy-tx.20 mapping ok
<6>[    6.077676]@6 compress asoc: snd-soc-dummy-dai <-> MultiMedia4
mapping ok
<6>[    6.078707]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
AUXPCM_HOSTLESS mapping ok
<6>[    6.079926]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
SLIMBUS1_HOSTLESS mapping ok
<6>[    6.081332]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
SLIMBUS3_HOSTLESS mapping ok
<6>[    6.082454]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
SLIMBUS4_HOSTLESS mapping ok
<6>[    6.084246]@6 msm8994-asoc-snd fe034000.sound:  snd-soc-dummy-dai <->
VoLTE mapping ok
<6>[19700102_10:51:51.002590]@1 otracer_open
<6>[19700102_10:51:51.002620]@1 otracer_close
<6>[19700102_10:51:51.003379]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> MultiMedia5 mapping ok
<6>[19700102_10:51:51.004130]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM1 mapping ok
<6>[19700102_10:51:51.007640]@2 compress asoc: snd-soc-dummy-dai <->
MultiMedia7 mapping ok
<6>[19700102_10:51:51.011179]@1 compress asoc: snd-soc-dummy-dai <->
MultiMedia10 mapping ok
<6>[19700102_10:51:51.013874]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> MultiMedia8 mapping ok
<6>[19700102_10:51:51.016304]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> QCHAT mapping ok
<11>[19700102_10:51:51.016500]@0 init: cannot
execve('/system/bin/install-recovery.sh'): Permission denied
<36>[19700102_10:51:51.016583]@4 type=1400 audit(96710.999:4): avc: denied
{ entrypoint } for pid=500 comm="init"
path="/system/etc/install-recovery.sh" dev="mmcblk0p42" ino=24386
scontext=u:r:install_recovery:s0 tcontext=u:object_r:system_file:s0
tclass=file permissive=0
<6>[19700102_10:51:51.020838]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
<11>[19700102_10:51:51.021161]@2 init: cannot find
'/system/bin/ptt_socket_app', disabling 'ptt_socket_app'
<6>[19700102_10:51:51.022684]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> Voice2 mapping ok
<6>[19700102_10:51:51.024194]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
<11>[19700102_10:51:51.024567]@2 init: Warning!  Service self-init needs a
SELinux domain defined; please fix!
<6>[19700102_10:51:51.026484]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> MultiMedia6 mapping ok
<4>[19700102_10:51:51.026983]@3 QSEECOM: qseecom_load_app: App (keymaste)
does'nt exist, loading apps for first time
<3>[19700102_10:51:51.030249]@1 devfreq qcom,kgsl-busmon.71: Couldn't
update frequency transition information.
<6>[19700102_10:51:51.030796]@1 msm8994-asoc-snd fe034000.sound:
tomtom_vifeedback <-> qcom,msm-dai-q6-sb-4-tx.192 mapping ok
<6>[19700102_10:51:51.032194]@1 msm8994-asoc-snd fe034000.sound:
tomtom_rx2 <-> qcom,msm-dai-q6-sb-2-rx.187 mapping ok
<6>[19700102_10:51:51.033450]@1 msm8994-asoc-snd fe034000.sound:
tomtom_tx2 <-> qcom,msm-dai-q6-sb-2-tx.188 mapping ok
<6>[19700102_10:51:51.034676]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM2 mapping ok
<11>[19700102_10:51:51.038623]@4 init: cannot find
'/system/bin/dts_configurator', disabling 'dts_configurator'
<6>[19700102_10:51:51.045422]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM3 mapping ok
<6>[19700102_10:51:51.046908]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM4 mapping ok
<6>[19700102_10:51:51.048330]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM5 mapping ok
<4>[19700102_10:51:51.048997]@3 QSEECOM: qseecom_load_app: App with id 3
(keymaste) now loaded
<6>[19700102_10:51:51.052377]@4 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM6 mapping ok
<6>[19700102_10:51:51.058007]@1 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM7 mapping ok
<6>[19700102_10:51:51.061825]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> LSM8 mapping ok
<6>[19700102_10:51:51.063235]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> MultiMedia9 mapping ok
<6>[19700102_10:51:51.063946]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> VoWLAN mapping ok
<6>[19700102_10:51:51.064993]@5 compress asoc: snd-soc-dummy-dai <->
MultiMedia11 mapping ok
<6>[19700102_10:51:51.065985]@5 compress asoc: snd-soc-dummy-dai <->
MultiMedia12 mapping ok
<6>[19700102_10:51:51.066832]@5 compress asoc: snd-soc-dummy-dai <->
MultiMedia13 mapping ok
<6>[19700102_10:51:51.067702]@5 compress asoc: snd-soc-dummy-dai <->
MultiMedia14 mapping ok
<6>[19700102_10:51:51.069772]@5 compress asoc: snd-soc-dummy-dai <->
MultiMedia15 mapping ok
<6>[19700102_10:51:51.071084]@5 compress asoc: snd-soc-dummy-dai <->
MultiMedia16 mapping ok
<6>[19700102_10:51:51.071929]@5 msm8994-asoc-snd fe034000.sound:
tomtom_mad1 <-> CPE_LSM_NOHOST mapping ok
<6>[19700102_10:51:51.076262]@5 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> PRI_MI2S_RX_HOSTLESS mapping ok
<11>[19700102_10:51:51.077223]@5 init: Warning!  Service zygote needs a
SELinux domain defined; please fix!
<6>[19700102_10:51:51.078691]@4 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> QUAT_MI2S_RX_HOSTLESS mapping ok
<6>[19700102_10:51:51.080992]@2 msm8994-asoc-snd fe034000.sound:
snd-soc-dummy-dai <-> QUAT_MI2S_HOSTLESS mapping ok
<6>[19700102_10:51:51.082914]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-rx <-> qcom,msm-dai-q6-int-fm-rx.196 mapping ok
<6>[19700102_10:51:51.084076]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-dai-q6-int-fm-tx.197 mapping ok
<6>[19700102_10:51:51.085108]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-rx <-> qcom,msm-dai-q6-be-afe-pcm-rx.1 mapping ok
<6>[19700102_10:51:51.086135]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-dai-q6-be-afe-pcm-tx.1 mapping ok
<6>[19700102_10:51:51.089379]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-rx <-> qcom,msm-pri-auxpcm.56 mapping ok
<6>[19700102_10:51:51.091574]@5 'opened /dev/adsprpc-smd c 221 0'
<6>[19700102_10:51:51.091604]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-pri-auxpcm.56 mapping ok
<6>[19700102_10:51:51.093989]@2 msm8994-asoc-snd fe034000.sound:
msm-stub-rx <-> qcom,msm-sec-auxpcm.57 mapping ok
<6>[19700102_10:51:51.094182]@5 Set dload mode:false
<6>[19700102_10:51:51.094715]@5 val:0, otrace_on:0
<6>[19700102_10:51:51.095160]@5 SSR:write the restart level switch to :0
<6>[19700102_10:51:51.095545]@5 SMBCHG: set_pmi_reset_type:
default_pmi_reset_type=1
<6>[19700102_10:51:51.095553]@5 SMBCHG: set_pmi_reset_type: Pass
pmi_reset_type 7 from userspace, set pmi reset type to 7
<6>[19700102_10:51:51.099275]@0 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-sec-auxpcm.57 mapping ok
<6>[19700102_10:51:51.100330]@0 msm_audrx_init:
dev_nameqcom,msm-dai-q6-sb-0-rx.183
<3>[19700102_10:51:51.102661]@2 enable_store: android_usb: already disabled
<6>[19700102_10:51:51.111547]@2 mtp_bind_config
<3>[19700102_10:51:51.116671]@0 tomtom_codec tomtom_codec: ASoC: unknown
pin Handset Mic
<3>[19700102_10:51:51.116865]@0 tomtom_codec tomtom_codec: ASoC: unknown
pin ANCRight Headset Mic
<3>[19700102_10:51:51.117024]@0 tomtom_codec tomtom_codec: ASoC: unknown
pin ANCLeft Headset Mic
<7>[19700102_10:51:51.138350]@0 SELinux: initialized (dev fuse, type fuse),
uses genfs_contexts
<6>[20150831_19:23:14.267936]@5 msm_thermal:set_enabled enabled = 0
<6>[20150831_19:23:14.302492]@5 subsys-restart: __subsystem_get(): Changing
subsys fw_name to modem
<6>[20150831_19:23:14.302822]@1 IPA received MPSS BEFORE_POWERUP
<3>[20150831_19:23:14.303259]@2 ipa ipa_uc_state_check:246 uC is not loaded
<6>[20150831_19:23:14.305281]@4 IPA BEFORE_POWERUP handling is complete
<6>[20150831_19:23:14.365980]@5 pil-q6v5-mss fc880000.qcom,mss: modem:
loading from 0x0000000007000000 to 0x000000000ca00000
<6>[20150831_19:23:14.389226]@4 pil-q6v5-mss fc880000.qcom,mss: MBA:
loading from 0x00000000dee00000 to 0x00000000def00000
<6>[20150831_19:23:14.426578]@5 pil-q6v5-mss fc880000.qcom,mss: MBA boot
done
<4>[20150831_19:23:14.458625]@4 cp (705) used greatest stack depth: 10984
bytes left
<6>[20150831_19:23:14.505890]@5 msm8994-asoc-snd fe034000.sound:
tomtom_rx1 <-> qcom,msm-dai-q6-sb-0-rx.183 mapping ok
<6>[20150831_19:23:14.506971]@5 msm8994-asoc-snd fe034000.sound:
tomtom_tx1 <-> qcom,msm-dai-q6-sb-0-tx.184 mapping ok
<6>[20150831_19:23:14.507795]@5 msm8994-asoc-snd fe034000.sound:
tomtom_rx1 <-> qcom,msm-dai-q6-sb-1-rx.185 mapping ok
<6>[20150831_19:23:14.508373]@4 msm8994-asoc-snd fe034000.sound:
tomtom_tx1 <-> qcom,msm-dai-q6-sb-1-tx.186 mapping ok
<6>[20150831_19:23:14.509062]@4 msm8994-asoc-snd fe034000.sound:
tomtom_rx1 <-> qcom,msm-dai-q6-sb-3-rx.189 mapping ok
<6>[20150831_19:23:14.509662]@4 msm8994-asoc-snd fe034000.sound:
tomtom_tx1 <-> qcom,msm-dai-q6-sb-3-tx.190 mapping ok
<6>[20150831_19:23:14.510418]@4 msm8994-asoc-snd fe034000.sound:
tomtom_rx1 <-> qcom,msm-dai-q6-sb-4-rx.191 mapping ok
<6>[20150831_19:23:14.511163]@4 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-dai-q6-incall-record-t mapping ok
<6>[20150831_19:23:14.512305]@4 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-dai-q6-incall-record-r mapping ok
<6>[20150831_19:23:14.513382]@4 msm8994-asoc-snd fe034000.sound:
tomtom_mad1 <-> qcom,msm-dai-q6-sb-5-tx.193 mapping ok
<6>[20150831_19:23:14.514183]@4 msm8994-asoc-snd fe034000.sound:
msm-stub-rx <-> qcom,msm-dai-q6-incall-music-rx mapping ok
<6>[20150831_19:23:14.515067]@4 msm8994-asoc-snd fe034000.sound:
msm-stub-rx <-> qcom,msm-dai-q6-incall-music-2- mapping ok
<6>[20150831_19:23:14.515772]@4 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-dai-q6-mi2s-prim.206 mapping ok
<6>[20150831_19:23:14.516497]@4 msm8994-asoc-snd fe034000.sound:
tfa98xx_codec <-> qcom,msm-dai-q6-mi2s-prim.206 mapping ok
<6>[20150831_19:23:14.517101]@4 msm8994-asoc-snd fe034000.sound:
tfa98xx_codec <-> qcom,msm-dai-q6-mi2s-quat.207 mapping ok
<6>[20150831_19:23:14.517706]@4 msm8994-asoc-snd fe034000.sound:
msm-stub-tx <-> qcom,msm-dai-q6-mi2s-quat.207 mapping ok
<6>[20150831_19:23:14.543129]@5 input: msm8994-tomtom-mtp-snd-card Button
Jack as /devices/soc.0/fe034000.sound/sound/card0/input7
<6>[20150831_19:23:14.543599]@5 input: msm8994-tomtom-mtp-snd-card Headset
Jack as /devices/soc.0/fe034000.sound/sound/card0/input8
<6>[20150831_19:23:14.551236]@2 msm8994-asoc-snd fe034000.sound: property
qcom,us-euro-gpios not detected in node /soc/sound
<3>[20150831_19:23:14.678836]@5 load_data: stored_soc[0x81],
shutdown_soc[64]
<6>[20150831_19:23:14.697151]@4 display power on start
<6>[20150831_19:23:14.697372]@4 display power on end
<6>[20150831_19:23:14.697403]@4 blank on start
<3>[20150831_19:23:14.697413]@4 fpc1020 spi12.0: fb_notifier_callback
change to home key
<6>[20150831_19:23:14.697421]@4 display power on start
<6>[20150831_19:23:14.697425]@4 display power on end
<6>[20150831_19:23:14.697436]@4 blank on end
<3>[20150831_19:23:14.990299]@4 msm_camera_fill_vreg_params:76 i 1 j 1
cam_vio
<3>[20150831_19:23:14.990311]@4 msm_camera_fill_vreg_params:95 i 2 j 2
cam_vana
<3>[20150831_19:23:14.990318]@4 msm_camera_fill_vreg_params:57 i 3 j 0
cam_vdig
<3>[20150831_19:23:14.990324]@4 msm_camera_fill_vreg_params:134 i 5 j 3
cam_vcustom1
<3>[20150831_19:23:14.990331]@4 msm_camera_fill_vreg_params:57 i 3 j 0
cam_vdig
<3>[20150831_19:23:14.990336]@4 msm_camera_fill_vreg_params:95 i 4 j 2
cam_vana
<3>[20150831_19:23:14.990342]@4 msm_camera_fill_vreg_params:76 i 5 j 1
cam_vio
<3>[20150831_19:23:14.990348]@4 msm_camera_fill_vreg_params:134 i 7 j 3
cam_vcustom1
<6>[20150831_19:23:14.996437]@5 msm_cci_init:1292: hw_version = 0x10020000
<3>[20150831_19:23:15.004535]@2 ov13860 probe succeeded
<3>[20150831_19:23:15.004544]@2 msm_camera_fill_vreg_params:76 i 0 j 1
cam_vio
<3>[20150831_19:23:15.004558]@2 msm_camera_fill_vreg_params:95 i 1 j 2
cam_vana
<3>[20150831_19:23:15.004568]@2 msm_camera_fill_vreg_params:95 i 4 j 2
cam_vana
<3>[20150831_19:23:15.004576]@2 msm_camera_fill_vreg_params:76 i 5 j 1
cam_vio
<6>[20150831_19:23:15.015341]@5 msm_cci_init:1292: hw_version = 0x10020000
<3>[20150831_19:23:15.028448]@5 ov5648 probe succeeded
<6>[20150831_19:23:15.028454]@5 msm_cci_init:1292: hw_version = 0x10020000
<6>[20150831_19:23:15.029725]@5 msm_cci_init:1292: hw_version = 0x10020000
<6>[20150831_19:23:15.030945]@5 msm_cci_init:1292: hw_version = 0x10020000
<6>[20150831_19:23:15.032425]@1 msm_csid_init: CSID_VERSION = 0x30010000
<6>[20150831_19:23:15.035143]@5 msm_csid_init: CSID_VERSION = 0x30010000
<6>[20150831_19:23:15.168407]@5 MSM-CPP cpp_init_hardware:1105 CPP HW
Version: 0x50000000
<3>[20150831_19:23:15.168427]@5 MSM-CPP cpp_init_hardware:1126 stream_cnt:0
<6>[20150831_19:23:15.240033]@1 MSM-CPP cpp_load_fw:1263 MC Bootloader
Version: 0x312e3176
<6>[20150831_19:23:15.246185]@0 MSM-CPP cpp_load_fw:1276 CPP FW Version:
0x1008001d
<3>[20150831_19:23:15.249693]@2 MSM-CPP cpp_release_ion_client:690 Calling
ion_client_destroy
<6>[20150831_19:23:15.361533]@4 blank on start
<3>[20150831_19:23:15.361549]@4 fpc1020 spi12.0: fb_notifier_callback
change to home key
<6>[20150831_19:23:15.361559]@4 display power on start
<6>[20150831_19:23:15.361564]@4 display power on end
<6>[20150831_19:23:15.361582]@4 blank on end
<7>[20150831_19:23:15.396119]@5 SELinux: 2048 avtab hash slots, 8674 rules.
<7>[20150831_19:23:15.415314]@5 SELinux: 2048 avtab hash slots, 8674 rules.
<7>[20150831_19:23:15.415455]@5 SELinux:  1 users, 2 roles, 700 types, 0
bools, 1 sens, 1024 cats
<7>[20150831_19:23:15.415461]@5 SELinux:  86 classes, 8674 rules
<7>[20150831_19:23:15.472262]@5 SELinux: initialized (dev tmpfs, type
tmpfs), uses transition SIDs
<38>[20150831_19:23:15.563124]@1 type=1403 audit(1441020195.554:5): policy
loaded auid=4294967295 ses=4294967295
<7>[20150831_19:23:15.875995]@5 SELinux: 2048 avtab hash slots, 8674 rules.
<7>[20150831_19:23:15.895346]@5 SELinux: 2048 avtab hash slots, 8674 rules.
<7>[20150831_19:23:15.895516]@5 SELinux:  1 users, 2 roles, 700 types, 0
bools, 1 sens, 1024 cats
<7>[20150831_19:23:15.895522]@5 SELinux:  86 classes, 8674 rules
<38>[20150831_19:23:16.052372]@3 type=1403 audit(1441020196.044:6): policy
loaded auid=4294967295 ses=4294967295
<6>[20150831_19:23:16.090503]@1 EXT4-fs (mmcblk0p42): re-mounted. Opts:
(null)
<6>[20150831_19:23:16.196463]@1 EXT4-fs (mmcblk0p42): re-mounted. Opts:
(null)
<6>[20150831_19:23:16.226052]@3 EXT4-fs (mmcblk0p42): re-mounted. Opts:
(null)
<7>[20150831_19:23:16.291541]@2 SELinux: initialized (dev tmpfs, type
tmpfs), uses transition SIDs
<3>[20150831_19:23:16.319551]@0 load_data: stored_soc[0x81],
shutdown_soc[64]
<3>[20150831_19:23:16.319601]@0 load_data: stored_soc[0x81],
shutdown_soc[64]
<3>[20150831_19:23:16.319658]@0 load_data: stored_soc[0x81],
shutdown_soc[64]
<6>[20150831_19:23:16.319790]@0 FG: get_batt_id: qpnp-fg battery_id_uv=
156800
<6>[20150831_19:23:16.319799]@0 FG: get_batt_id: qpnp-fg battery_id_ohm=
1045
<3>[20150831_19:23:16.320236]@0 load_data: stored_soc[0x81],
shutdown_soc[64]
<3>[20150831_19:23:16.320365]@4 load_data: stored_soc[0x81],
shutdown_soc[64]
<3>[20150831_19:23:16.322158]@2 load_data: stored_soc[0x81],
shutdown_soc[64]
<7>[20150831_19:23:16.880965]@0 SELinux: initialized (dev tmpfs, type
tmpfs), uses transition SIDs
<11>[20150831_19:23:17.031810]@1 init: untracked pid 1048 exited with
status 0
<6>[20150831_19:23:17.065891]@5 pil-q6v5-mss fc880000.qcom,mss: modem:
Brought out of reset
<6>[20150831_19:23:17.172767]@4 pil-q6v5-mss fc880000.qcom,mss: modem:
Power/Clock ready interrupt received
<6>[20150831_19:23:17.172781]@0 pil-q6v5-mss fc880000.qcom,mss: Subsystem
error monitoring/handling services are up
<6>[20150831_19:23:17.173118]@1 IPA received MPSS AFTER_POWERUP
<6>[20150831_19:23:17.173129]@1 IPA AFTER_POWERUP handling is complete
<3>[20150831_19:23:17.173793]@4 M-Notify: General: 7
<6>[20150831_19:23:17.245530]@1 sysmon-qmi: sysmon_clnt_svc_arrive:
Connection established between QMI handle and modem's SSCTL service
<6>[20150831_19:23:17.814054]@0 apr_tal:Modem Is Up
<3>[20150831_19:23:17.818558]@2 diag: In diag_dci_write_proc, invalid data
0xffffffc0ce4de900, peripheral: 0, len: 527
<6>[20150831_19:23:17.830527]@1 Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
<3>[20150831_19:23:17.830770]@2 ipa-wan handle_indication_req:130 not send
indication
<3>[20150831_19:23:17.834124]@2 ipa ipa_uc_wdi_event_log_info_handler:324
WDI stats ofst=0x26f44
<3>[20150831_19:23:17.834187]@0 ipa ipa_uc_response_hdlr:388 IPA uC loaded
<6>[20150831_19:23:17.834415]@3 QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response
received
<3>[20150831_19:23:17.881285]@4 load_data: stored_soc[0x81],
shutdown_soc[64]
<3>[20150831_19:23:17.883114]@3 load_data: stored_soc[0x81],
shutdown_soc[64]
<6>[20150831_19:23:18.800034]@0 synap rmidev_create_attr
<6>[20150831_19:23:19.140023]@0 synap rmidev_create_attr
<3>[20150831_19:23:19.829300]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data0) register to IPA
<3>[20150831_19:23:19.831850]@0 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data1) register to IPA
<3>[20150831_19:23:19.833089]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data2) register to IPA
<3>[20150831_19:23:19.833549]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data3) register to IPA
<3>[20150831_19:23:19.833963]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data4) register to IPA
<3>[20150831_19:23:19.834400]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data5) register to IPA
<3>[20150831_19:23:19.834814]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data6) register to IPA
<3>[20150831_19:23:19.835259]@5 ipa-wan ipa_wwan_ioctl:1262
dev(rmnet_data7) register to IPA
<3>[20150831_19:23:20.110422]@4 msm_qti_pp_get_rms_value_control, back not
active to query rms be_idx:3
<3>[20150831_19:23:20.113498]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.113675]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.113844]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.113960]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.114354]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.114462]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.114794]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.115273]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.115388]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.115725]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.116073]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.116400]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.116742]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.117095]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.398187]@4 core_set_license: Invalid cal block to send
<3>[20150831_19:23:20.398193]@4 msm_qti_pp_get_rms_value_control, back not
active to query rms be_idx:3
<3>[20150831_19:23:20.401394]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.401563]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.401721]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.401828]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.402213]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.402326]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.402648]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.403125]@4 msm_pcm_volume_ctl_get substream runtime
not found
<3>[20150831_19:23:20.403237]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.403569]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.403913]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.404246]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.404591]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:20.404920]@4 msm_compr_audio_effects_config_get: stream
or effects inactive
<3>[20150831_19:23:22.197461]@4 SMBCHG: smbchg_battchg_en: chg_en
smbchg_battchg_en:enable =1
<3>[20150831_19:23:22.197471]@4 SMBCHG: smbchg_charging_en: chg_en
smbchg_charging_en:en =1
<6>[20150831_19:23:22.197649]@4 FG: get_batt_id: qpnp-fg battery_id_uv=
147000
<6>[20150831_19:23:22.197656]@4 FG: get_batt_id: qpnp-fg battery_id_ohm= 980
<3>[20150831_19:23:22.198002]@4 load_data: stored_soc[0x81],
shutdown_soc[64]
<3>[20150831_19:23:22.198010]@4 FG: fg_soc_calibrate: soc=64,soc_load:64
<3>[20150831_19:23:22.198016]@4 backup_soc: backup_soc[64]
<3>[20150831_19:23:30.499982]@5 tristate_key set_gpio_by_pinctrl.
<6>[20150831_19:23:30.500144]@5 switch_dev_work ,tristate set to state(1)
<3>[20150831_19:23:31.874905]@5 touchkey,s1302:
synaptics_s1302_key_reverse_write key_reverse:1
<6>[20150831_19:23:31.936727]@4 lowmemorykiller: lowmem_shrink: convert
oom_adj to oom_score_adj:
<6>[20150831_19:23:31.936738]@4 lowmemorykiller: oom_adj 0 => oom_score_adj
0
<6>[20150831_19:23:31.936744]@4 lowmemorykiller: oom_adj 1 => oom_score_adj
58
<6>[20150831_19:23:31.936750]@4 lowmemorykiller: oom_adj 2 => oom_score_adj
117
<6>[20150831_19:23:31.936756]@4 lowmemorykiller: oom_adj 3 => oom_score_adj
176
<6>[20150831_19:23:31.936761]@4 lowmemorykiller: oom_adj 9 => oom_score_adj
529
<6>[20150831_19:23:31.936767]@4 lowmemorykiller: oom_adj 15 =>
oom_score_adj 1000
<6>[20150831_19:23:32.364430]@5 acc_open
<6>[20150831_19:23:32.364454]@5 acc_release
<6>[20150831_19:23:32.717359]@4 synap tp_gesture_write_func status write
buf[0]=c1
<6>[20150831_19:23:32.726729]@4 --------backlight level = 8---------
<6>[20150831_19:23:33.182184]@0 evrc_in_open:session id 1: NT mode encoder
success
<6>[20150831_19:23:33.182201]@0 evrc_in_open:session id 1: success
<6>[20150831_19:23:33.186844]@5 audio_in_release: session id 1
<6>[20150831_19:23:33.192558]@1 qcelp_in_open:session id 1: NT mode encoder
success
<6>[20150831_19:23:33.192574]@1 qcelp_in_open:session id 1: success
<6>[20150831_19:23:33.195269]@1 audio_in_release: session id 1
<6>[20150831_19:23:33.202622]@4 msm_vidc: info: Opening video instance:
ffffffc0a8a82180, 0
<6>[20150831_19:23:33.217054]@5 subsys-pil-tz fdce0000.qcom,venus: venus:
loading from 0x000000000e200000 to 0x000000000e700000
<6>[20150831_19:23:33.277363]@5 subsys-pil-tz fdce0000.qcom,venus: venus:
Brought out of reset
<6>[20150831_19:23:33.306542]@4 msm_vidc: info: Closed video instance:
ffffffc0a8a82180
<6>[20150831_19:23:33.307766]@4 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 0
<6>[20150831_19:23:33.313070]@3 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.315075]@3 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 0
<6>[20150831_19:23:33.319699]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.321393]@0 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 0
<6>[20150831_19:23:33.326534]@4 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.332654]@4 audio_open:wmadec success mode[1]session[1]
<6>[20150831_19:23:33.338962]@5 audio_open:wmapro decoder open success,
session_id = 1
<6>[20150831_19:23:33.346363]@5 audio_open:wmapro decoder open success,
session_id = 1
<6>[20150831_19:23:33.370769]@3 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.383740]@2 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.385303]@3 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.397404]@3 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.399277]@3 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.406645]@3 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.408298]@3 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.418317]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.419523]@5 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.426148]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.427353]@5 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.433352]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.434635]@2 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.440502]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.441442]@5 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.447684]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.448711]@5 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.455619]@4 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.456896]@1 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.463208]@4 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.464312]@4 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.470612]@5 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.471600]@5 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.477071]@1 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.478282]@5 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.488334]@4 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<6>[20150831_19:23:33.489499]@4 msm_vidc: info: Opening video instance:
ffffffc06e7ac300, 1
<6>[20150831_19:23:33.497539]@1 msm_vidc: info: Closed video instance:
ffffffc06e7ac300
<4>[20150831_19:23:33.583832]@4 NPDecoder (4309) used greatest stack depth:
10152 bytes left
<6>[20150831_19:23:34.239738]@4 msm_csid_init: CSID_VERSION = 0x30010000
<6>[20150831_19:23:34.260685]@5 MSM-CPP cpp_init_hardware:1105 CPP HW
Version: 0x50000000
<3>[20150831_19:23:34.260706]@5 MSM-CPP cpp_init_hardware:1126 stream_cnt:0
<6>[20150831_19:23:34.277177]@4 msm_cci_init:1292: hw_version = 0x10020000
<6>[20150831_19:23:34.284882]@4 MSM-CPP cpp_load_fw:1263 MC Bootloader
Version: 0x312e3176
<6>[20150831_19:23:34.291292]@2 MSM-CPP cpp_load_fw:1276 CPP FW Version:
0x1008001d
<3>[20150831_19:23:34.523706]@1 msm_post_event : timeout cannot be negative
Line 742
<3>[20150831_19:23:34.575120]@3 MSM-CPP cpp_release_ion_client:690 Calling
ion_client_destroy
<6>[20150831_19:23:34.768162]@5 msm_csid_init: CSID_VERSION = 0x30010000
<6>[20150831_19:23:34.790861]@0 msm_cci_init:1292: hw_version = 0x10020000
<6>[20150831_19:23:34.800802]@0 MSM-CPP cpp_init_hardware:1105 CPP HW
Version: 0x50000000
<3>[20150831_19:23:34.800873]@0 MSM-CPP cpp_init_hardware:1126 stream_cnt:0
<6>[20150831_19:23:34.825899]@0 MSM-CPP cpp_load_fw:1263 MC Bootloader
Version: 0x312e3176
<6>[20150831_19:23:34.834851]@2 MSM-CPP cpp_load_fw:1276 CPP FW Version:
0x1008001d
<3>[20150831_19:23:34.940421]@3 msm_post_event : timeout cannot be negative
Line 742
<3>[20150831_19:23:34.972598]@3 MSM-CPP cpp_release_ion_client:690 Calling
ion_client_destroy
<6>[20150831_19:23:36.139279]@1 msm_vidc: info: Opening video instance:
ffffffc06c66c300, 1
<6>[20150831_19:23:36.160093]@5 msm_vidc: info: Closed video instance:
ffffffc06c66c300
<3>[20150831_19:23:36.778859]@5 fpc1020 spi12.0: nav_switch change to 0
<7>[20150831_19:23:36.778871]@5 fpc1020 spi12.0: fpc1020_worker_goto_idle,
stop_request
<7>[20150831_19:23:36.950136]@5 fpc1020 spi12.0: fpc1020_worker_goto_idle,
is idle
<4>[20150831_19:23:36.963703]@1 QSEECOM: qseecom_load_app: App
(fingerprints) does'nt exist, loading apps for first time
<4>[20150831_19:23:37.031328]@5 QSEECOM: qseecom_load_app: App with id 4
(fingerprints) now loaded
<3>[20150831_19:23:37.112902]@5 fpc1020 spi12.0: fpc1020_open
<3>[20150831_19:23:37.167784]@5 fpc1020 spi12.0: FPC_GET_INTERRUPT:
enable_irq
<6>[20150831_19:23:44.560740]@3 FG: get_batt_id: qpnp-fg battery_id_uv=
147000
<6>[20150831_19:23:44.560756]@3 FG: get_batt_id: qpnp-fg battery_id_ohm= 980
<3>[20150831_19:23:47.309652]@2 [RMNET:HI] rmnet_vnd_ioctl(): Unkown IOCTL
0x00008B01
<3>[20150831_19:23:47.401046]@2 [RMNET:HI] rmnet_vnd_ioctl(): Unkown IOCTL
0x00008B01
<3>[20150831_19:23:47.401179]@2 [RMNET:HI] rmnet_vnd_ioctl(): Unkown IOCTL
0x00008B01
<4>[20150831_19:23:47.789716]@5 IRQ32 no longer affine to CPU5
<4>[20150831_19:23:47.789729]@5 IRQ33 no longer affine to CPU5
<4>[20150831_19:23:47.789738]@5 IRQ34 no longer affine to CPU5
<4>[20150831_19:23:47.789746]@5 IRQ36 no longer affine to CPU5
<4>[20150831_19:23:47.789753]@5 IRQ37 no longer affine to CPU5
<4>[20150831_19:23:47.789760]@5 IRQ38 no longer affine to CPU5
<4>[20150831_19:23:47.789768]@5 IRQ39 no longer affine to CPU5
<4>[20150831_19:23:47.789775]@5 IRQ41 no longer affine to CPU5
<4>[20150831_19:23:47.789783]@5 IRQ42 no longer affine to CPU5
<4>[20150831_19:23:47.789789]@5 IRQ43 no longer affine to CPU5
<6>[20150831_19:23:47.793216]@0 msm_thermal:store_cc_enabled Core control
disabled
<6>[20150831_19:23:47.876813]@5 bcl_handle_hotplug: Allow Online CPU:5
<6>[20150831_19:23:47.876837]@5 mode_store: bcl disabled
<6>[20150831_19:23:47.882718]@4 hotplug_mask_store: bcl hotplug mask
updated to 0
<6>[20150831_19:23:47.887821]@4 hotplug_soc_mask_store: bcl soc hotplug
mask updated to 0
<6>[20150831_19:23:47.890670]@4 mode_store: bcl enabled
<3>[20150831_19:23:47.936112]@4 core_ctl: version magic
'3.10.49-perf-g37352a8 SMP preempt mod_unload modversions aarch64' should
be '3.10.49-Sandykernel SMP preempt mod_unload aarch64'
<6>[20150831_19:23:47.938880]@5 msm_thermal:store_cc_enabled Core control
enabled
<36>[20150831_19:23:47.984663]@4 type=1400 audit(1441020227.974:7): avc:
denied { read } for pid=9003 comm="Thread-91" name="log" dev="mmcblk0p41"
ino=8198 scontext=u:r:system_server:s0
tcontext=u:object_r:recovery_cache_file:s0 tclass=file permissive=0
<36>[20150831_19:23:47.985246]@2 type=1400 audit(1441020227.974:8): avc:
denied { read } for pid=9003 comm="Thread-91" name="recovery"
dev="mmcblk0p41" ino=8194 scontext=u:r:system_server:s0
tcontext=u:object_r:recovery_cache_file:s0 tclass=dir permissive=0
<6>[20150831_19:23:47.991741]@5 mode_store: bcl disabled
<6>[20150831_19:23:47.993041]@5 hotplug_mask_store: bcl hotplug mask
updated to 192
<6>[20150831_19:23:47.994227]@5 hotplug_soc_mask_store: bcl soc hotplug
mask updated to 240
<6>[20150831_19:23:47.999622]@5 mode_store: bcl enabled
<36>[20150831_19:23:48.034117]@2 type=1400 audit(1441020228.024:9): avc:
denied { read } for pid=9003 comm="Thread-91" name="log" dev="mmcblk0p41"
ino=8198 scontext=u:r:system_server:s0
tcontext=u:object_r:recovery_cache_file:s0 tclass=file permissive=0
<6>[20150831_19:23:48.086228]@3 msm_thermal:hotplug_notify tsens_tz_sensor6
reach temp threshold: 65
<6>[20150831_19:23:48.090147]@3 msm_thermal:hotplug_notify tsens_tz_sensor6
reach temp threshold: 65
<6>[20150831_19:23:48.094196]@3 msm_thermal:hotplug_notify tsens_tz_sensor6
reach temp threshold: 65
<6>[20150831_19:23:48.098259]@3 msm_thermal:hotplug_notify tsens_tz_sensor6
reach temp threshold: 65
<6>[20150831_19:23:48.102329]@3 msm_thermal:hotplug_notify tsens_tz_sensor6
reach temp threshold: 64
<4>[20150831_19:23:48.400927]@4 HTB: quantum of class 10001 is big.
Consider r2q change.
<4>[20150831_19:23:48.422548]@4 HTB: quantum of class 10010 is big.
Consider r2q change.
<6>[20150831_19:23:49.616327]@4 int_key button_key:2   pre_btn_state:0
<3>[20150831_19:23:49.639400]@4 sps: BAM device 0x00000000f9904000 is not
registered yet.
<14>[20150831_19:23:49.639467]@4 Boot completed
<6>[20150831_19:23:49.639474]@4 sps:BAM 0x00000000f9904000 is
registered.<6>[20150831_19:23:49.640141]@4 sps:BAM 0x00000000f9904000
(va:0xffffff80037a0000) enabled: ver:0x17, number of pipes:24
<6>[20150831_19:23:49.655693]@4 int_key button_key:0   pre_btn_state:2
<3>[20150831_19:23:49.680025]@4 synaptics,s3320: all finger up
<11>[20150831_19:23:50.496501]@0 init: no such service 'ppd'
<3>[20150831_19:23:50.811686]@2 fpc1020 spi12.0: FPC_ABORT
<4>[20150831_19:23:50.815258]@4 QSEECOM: qseecom_unload_app: App id 4 now
unloaded
<3>[20150831_19:23:50.815658]@4 fpc1020 spi12.0: fpc1020_release
<3>[20150831_19:23:50.815962]@0 fpc1020 spi12.0: nav_switch change to 1
<7>[20150831_19:23:50.815979]@0 fpc1020 spi12.0: fpc1020_worker_goto_idle,
already idle
<7>[20150831_19:23:50.816021]@2 fpc1020 spi12.0:
fpc1020_capture_deferred_task
<7>[20150831_19:23:50.816033]@2 fpc1020 spi12.0: fpc1020_regulator_set on
<7>[20150831_19:23:50.845143]@5 fpc1020 spi12.0:
fpc1020_calc_finger_detect_threshold_min : measured min = 0
<3>[20150831_19:23:50.857098]@0 fpc1020 spi12.0: Finger down
<3>[20150831_19:23:50.861329]@2 fpc1020 spi12.0:
fpc1020_wait_finger_present_lpm Wake up !
<3>[20150831_19:23:50.861347]@2 fpc1020 spi12.0:
fpc1020_wait_finger_present_lpm HOME DOWN !  fpc1020->to_power(0)
<3>[20150831_19:23:50.982753]@2 fpc1020 spi12.0:
fpc1020_wait_finger_present_lpm HOME UP !  fpc1020->to_power(0)
<7>[20150831_19:23:50.982800]@2 fpc1020 spi12.0: fpc1020_regulator_set on
<7>[20150831_19:23:51.004728]@0 fpc1020 spi12.0:
fpc1020_calc_finger_detect_threshold_min : measured min = 0
<3>[20150831_19:23:51.987053]@4 synaptics,s3320: all finger up
<6>[20150831_19:23:52.357490]@3 msm_thermal:hotplug_notify
tsens_tz_sensor15 reach temp threshold: 65
<6>[20150831_19:23:52.381726]@3 msm_thermal:hotplug_notify
tsens_tz_sensor15 reach temp threshold: 65
<6>[20150831_19:23:52.402046]@3 msm_thermal:hotplug_notify
tsens_tz_sensor15 reach temp threshold: 65
<6>[20150831_19:23:52.406080]@3 msm_thermal:hotplug_notify
tsens_tz_sensor15 reach temp threshold: 65
<6>[20150831_19:23:52.414197]@3 msm_thermal:hotplug_notify
tsens_tz_sensor15 reach temp threshold: 65
<3>[20150831_19:23:52.795355]@4 synaptics,s3320: all finger up
<3>[20150831_19:23:54.503581]@4 synaptics,s3320: all finger up
<3>[20150831_19:23:56.479424]@4 synaptics,s3320: all finger up
<4>[20150831_19:23:56.861414]@2 wlan: module is from the staging directory,
the quality is unknown, you have been warned.
<3>[20150831_19:23:56.871458]@2 module wlan: unsupported RELA relocation:
311
<6>[20150831_19:24:08.019626]@6 coresight-etmv4 fbe40000.etm: ETMv4
initialized
<6>[20150831_19:24:18.039664]@7 coresight-etmv4 fbf40000.etm: ETMv4
initialized
<3>[20150831_19:24:18.243008]@1 devbw qcom,cpubw.33:
dev_pm_opp_get_opp_count: device OPP not found (-19)
<11>[20150831_19:24:18.322584]@1 init: untracked pid 12739 exited with
status 1
<11>[20150831_19:24:18.325900]@1 init: untracked pid 12740 exited with
status 0
<11>[20150831_19:24:18.535062]@0 init: untracked pid 12738 exited with
status 127
<3>[20150831_19:24:19.490154]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:21.734187]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:23.284594]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:24.490943]@0 backup_soc: backup_soc[63]
<6>[20150831_19:24:24.491020]@0 FG: fg_soc_calibrate: soc:62, soc_calib:63
<3>[20150831_19:24:24.960136]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:25.709236]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:27.341628]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:29.193513]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:30.278050]@0 synaptics,s3320: all finger up
<4>[20150831_19:24:30.586910]@4 wlan: module is from the staging directory,
the quality is unknown, you have been warned.
<3>[20150831_19:24:30.596058]@4 module wlan: unsupported RELA relocation:
311
<3>[20150831_19:24:30.995346]@0 synaptics,s3320: all finger up
<4>[20150831_19:24:31.320098]@7 wlan: module is from the staging directory,
the quality is unknown, you have been warned.
<3>[20150831_19:24:31.327176]@7 module wlan: unsupported RELA relocation:
311
<3>[20150831_19:24:31.904317]@0 synaptics,s3320: all finger up
<4>[20150831_19:24:32.206778]@4 wlan: module is from the staging directory,
the quality is unknown, you have been warned.
<3>[20150831_19:24:32.214681]@4 module wlan: unsupported RELA relocation:
311
<3>[20150831_19:24:34.458046]@1 synaptics,s3320: all finger up
<4>[20150831_19:24:34.768307]@4 wlan: module is from the staging directory,
the quality is unknown, you have been warned.
<3>[20150831_19:24:34.775675]@4 module wlan: unsupported RELA relocation:
311
<3>[20150831_19:24:35.791695]@0 synaptics,s3320: all finger up
<4>[20150831_19:24:36.106664]@4 wlan: module is from the staging directory,
the quality is unknown, you have been warned.
<3>[20150831_19:24:36.114686]@4 module wlan: unsupported RELA relocation:
311
<3>[20150831_19:24:37.558990]@1 synaptics,s3320: all finger up
<3>[20150831_19:24:39.019504]@2 synaptics,s3320: all finger up
<3>[20150831_19:24:40.833636]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:41.735031]@1 synaptics,s3320: all finger up
<3>[20150831_19:24:43.275036]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:44.257239]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:46.074019]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:47.274101]@1 synaptics,s3320: all finger up
<3>[20150831_19:24:51.179922]@2 synaptics,s3320: all finger up
<3>[20150831_19:24:52.797148]@0 synaptics,s3320: all finger up
<3>[20150831_19:24:54.580105]@0 synaptics,s3320: all finger up