API tools faq
paste
Advertisement
Guest User

last_kmsg.log

a guest
Dec 5th, 2013
42
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C++ 38.36 KB | None | 0 0
raw download clone embed print report
  1. [    0.000000] Booting Linux on physical CPU 0
  2.  
  3. [    0.000000] Initializing cgroup subsys cpu
  4.  
  5. [    0.000000] Linux version 3.4.0-Bricked-TWRP-Edition-g27406e9-05626-gc3e7a05 (showp1984@jarvis) (gcc version 4.7.2 20120910 (prerelease) (Linaro GCC 4.7-2012.09) ) #1 SMP PREEMPT Sat Nov 2 21:45:13 CET 2013
  6.  
  7. [    0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  8.  
  9. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  10.  
  11. [    0.000000] Machine: QCT APQ8064 MAKO
  12.  
  13. [    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  14.  
  15. [    0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  16.  
  17. [    0.000000] Initialized persistent memory from 88700000-887fffff
  18.  
  19. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  20.  
  21. [    0.000000] smem_find(137, 80): wrong size 72
  22.  
  23. [    0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8,  hw_plat_ver=65536
  24.  
  25. [    0.000000]  accessory_chip=0 hw_plat_subtype=1
  26.  
  27. [    0.000000] allocating 21626880 bytes at c272c000 (8292c000 physical) for fb
  28.  
  29. [    0.000000] PERCPU: Embedded 9 pages/cpu @c3bcf000 s16256 r8192 d12416 u36864
  30.  
  31. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 488963
  32.  
  33. [    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=mode_reset gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.emmc=true androidboot.serialno=01be0fc8c793aeaf androidboot.bootloader=MAKOZ30d androidboot.baseband=mdm
  34.  
  35. [    0.000000] UART CONSOLE : enable
  36.  
  37. [    0.000000] kcal is 0|0|0|x
  38.  
  39. [    0.000000] kcal not calibrated yet : 120
  40.  
  41. [    0.000000] set to default : 255
  42.  
  43. [    0.000000] BOARD : LGE input rev_11
  44.  
  45. [    0.000000] BOARD : LGE matched rev_11
  46.  
  47. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  48.  
  49. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  50.  
  51. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  52.  
  53. [    0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
  54.  
  55. [    0.000000] Memory: 1910780k/1993724k available, 61440k reserved, 1286140K highmem
  56.  
  57. [    0.000000] Virtual kernel memory layout:
  58.  
  59. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  60.  
  61. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  62.  
  63. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  64.  
  65. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  66.  
  67. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  68.  
  69. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  70.  
  71. [    0.000000]       .text : 0xc0008000 - 0xc0d387d0   (13506 kB)
  72.  
  73. [    0.000000]       .init : 0xc0e00000 - 0xc0f03f80   (1040 kB)
  74.  
  75. [    0.000000]       .data : 0xc0f04000 - 0xc0ff13b4   ( 949 kB)
  76.  
  77. [    0.000000]        .bss : 0xc0ff13f4 - 0xc1270bcc   (2558 kB)
  78.  
  79. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  80.  
  81. [    0.000000] Preemptible hierarchical RCU implementation.
  82.  
  83. [    0.000000] NR_IRQS:921
  84.  
  85. [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  86.  
  87. [    0.000000] Console: colour dummy device 80x30
  88.  
  89. [    0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  90.  
  91. [    0.000183] pid_max: default: 32768 minimum: 301
  92.  
  93. [    0.000427] Security Framework initialized
  94.  
  95. [    0.000457] SELinux:  Initializing.
  96.  
  97. [    0.000610] Mount-cache hash table entries: 512
  98.  
  99. [    0.001831] Initializing cgroup subsys debug
  100.  
  101. [    0.001861] Initializing cgroup subsys cpuacct
  102.  
  103. [    0.001861] Initializing cgroup subsys freezer
  104.  
  105. [    0.001983] CPU: Testing write buffer coherency: ok
  106.  
  107. [    0.002258] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  108.  
  109. [    0.002289] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  110.  
  111. [    0.002380] Setting up static identity map for 0x80baa568 - 0x80baa5f0
  112.  
  113. [    0.005615] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  114.  
  115. [    0.008026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  116.  
  117. [    0.010468] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  118.  
  119. [    0.010590] Brought up 4 CPUs
  120.  
  121. [    0.010590] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  122.  
  123. [    0.024416] dummy:
  124.  
  125. [    0.024843] NET: Registered protocol family 16
  126.  
  127. [    0.025331] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  128.  
  129. [    0.027468] meminfo_init: smem ram ptable found: ver: 0 len: 6
  130.  
  131. [    0.027498] Found 2 memory banks grouped into 16 memory regions
  132.  
  133. [    0.027681] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  134.  
  135. [    0.028444] smem_find(137, 80): wrong size 72
  136.  
  137. [    0.028475] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8,  hw_plat_ver=65536
  138.  
  139. [    0.028475]  accessory_chip=0 hw_plat_subtype=1
  140.  
  141. [    0.028597] msm_rpm_init: RPM firmware 3.0.16842886
  142.  
  143. [    0.048344] msm_rpm_get_status(): Status id 433 not defined for target
  144.  
  145. [    0.048374] msm_rpm_get_status(): Status id 433 not defined for target
  146.  
  147. [    0.048374] msm_rpm_get_status(): Status id 433 not defined for target
  148.  
  149. [    0.048374] msm_rpm_get_status(): Status id 433 not defined for target
  150.  
  151. [    0.048405] msm_rpm_get_status(): Status id 433 not defined for target
  152.  
  153. [    0.048405] msm_rpm_get_status(): Status id 433 not defined for target
  154.  
  155. [    0.048435] msm_rpm_get_status(): Status id 433 not defined for target
  156.  
  157. [    0.048435] msm_rpm_get_status(): Status id 433 not defined for target
  158.  
  159. [    0.066473] pm8921_probe: PMIC revision 1: F4
  160.  
  161. [    0.066473] pm8921_probe: PMIC revision 2: 06
  162.  
  163. [    0.066503] pm8921_probe: PMIC version: PM8921 rev 3.0
  164.  
  165. [    0.066503] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  166.  
  167. [    0.067633] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  168.  
  169. [    0.068121] pm_gpio_probe: OK: base=152, ngpio=44
  170.  
  171. [    0.068396] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  172.  
  173. [    0.068487] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  174.  
  175. [    0.070563] pm8821_probe: PMIC revision 1: PM8821 rev F3
  176.  
  177. [    0.070593] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  178.  
  179. [    0.070593] pm8821_probe: PMIC version: PM8821 ver 2.1
  180.  
  181. [    0.071173] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  182.  
  183. [    0.071204] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  184.  
  185. [    0.071753] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  186.  
  187. [    0.073004] saw_probe: id=0, name=8921_s5
  188.  
  189. [    0.073340] saw_probe: id=1, name=8921_s6
  190.  
  191. [    0.073706] saw_probe: id=2, name=8821_s0
  192.  
  193. [    0.074072] saw_probe: id=3, name=8821_s1
  194.  
  195. [    0.082832] persistent_ram: error in header, 2
  196.  
  197. [    0.082862] persistent_ram: no valid data in buffer (sig = 0x00000000)
  198.  
  199. [    0.093087] console [ram-1] enabled
  200.  
  201. [    0.094521] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  202.  
  203. [    0.094613] [DEBUG] uart_enable : 1
  204.  
  205. [    0.097176] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  206.  
  207. [    0.098306] ------------[ cut here ]------------
  208.  
  209. [    0.098458] WARNING: at arch/arm/mach-msm/subsystem_restart.c:617 subsys_restart_init+0xdc/0x114()
  210.  
  211. [    0.098550] Modules linked in:
  212.  
  213. [    0.098794] [<c0017100>] (unwind_backtrace+0x0/0xf8) from [<c00948d0>] (warn_slowpath_null+0x38/0xa8)
  214.  
  215. [    0.098916] [<c00948d0>] (warn_slowpath_null+0x38/0xa8) from [<c0e0bb30>] (subsys_restart_init+0xdc/0x114)
  216.  
  217. [    0.099069] [<c0e0bb30>] (subsys_restart_init+0xdc/0x114) from [<c00088e8>] (do_one_initcall+0x10c/0x170)
  218.  
  219. [    0.099252] ---[ end trace da227214a82491b7 ]---
  220.  
  221. [    0.101754] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  222.  
  223. [    0.101846] sps:BAM 0x12244000 is registered.
  224.  
  225. [    0.102395] sps:sps is ready.
  226.  
  227. [    0.131237] bio: create slab <bio-0> at 0
  228.  
  229. [    0.131939] ION heap vmalloc created
  230.  
  231. [    0.132031] ION heap mm created at a0000000 with size 3800000
  232.  
  233. [    0.132214] ION heap mm_fw created at 9fe00000 with size 1e0000
  234.  
  235. [    0.132305] ION heap mfc created at a3800000 with size 2000
  236.  
  237. [    0.132488] ION heap iommu created
  238.  
  239. [    0.132611] ION heap qsecom created at fea07000 with size 780000
  240.  
  241. [    0.132794] ION heap audio created at ff187000 with size 4cf000
  242.  
  243. [    0.134106] pm8xxx_pwm_probe: OK
  244.  
  245. [    0.134869] SCSI subsystem initialized
  246.  
  247. [    0.135266] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  248.  
  249. [    0.135357] sps:BAM 0x28084000 is registered.
  250.  
  251. [    0.136273] usbcore: registered new interface driver usbfs
  252.  
  253. [    0.136517] usbcore: registered new interface driver hub
  254.  
  255. [    0.136792] usbcore: registered new device driver usb
  256.  
  257. [    0.137189] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  258.  
  259. [    0.138135] Linux media interface: v0.10
  260.  
  261. [    0.138257] Linux video capture interface: v2.00
  262.  
  263. [    0.140576] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  264.  
  265. [    0.140790] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  266.  
  267. [    0.141034] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  268.  
  269. [    0.141309] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  270.  
  271. [    0.141522] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  272.  
  273. [    0.141767] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  274.  
  275. [    0.142041] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  276.  
  277. [    0.142224] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  278.  
  279. [    0.142499] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  280.  
  281. [    0.142713] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  282.  
  283. [    0.142957] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  284.  
  285. [    0.143262] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  286.  
  287. [    0.143750] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  288.  
  289. [    0.144056] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  290.  
  291. [    0.144269] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  292.  
  293. [    0.144575] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  294.  
  295. [    0.144880] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  296.  
  297. [    0.145124] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  298.  
  299. [    0.145429] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  300.  
  301. [    0.145704] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  302.  
  303. [    0.145917] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  304.  
  305. [    0.146192] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  306.  
  307. [    0.146467] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  308.  
  309. [    0.146741] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  310.  
  311. [    0.147016] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  312.  
  313. [    0.147260] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  314.  
  315. [    0.147596] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  316.  
  317. [    0.147962] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  318.  
  319. [    0.148237] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  320.  
  321. [    0.148512] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  322.  
  323. [    0.148725] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  324.  
  325. [    0.149061] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  326.  
  327. [    0.149427] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  328.  
  329. [    0.149671] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  330.  
  331. [    0.149946] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  332.  
  333. [    0.150129] Advanced Linux Sound Architecture Driver Version 1.0.25.
  334.  
  335. [    0.150801] Bluetooth: Core ver 2.16
  336.  
  337. [    0.150923] NET: Registered protocol family 31
  338.  
  339. [    0.151106] Bluetooth: HCI device and connection manager initialized
  340.  
  341. [    0.151197] Bluetooth: HCI socket layer initialized
  342.  
  343. [    0.151350] Bluetooth: L2CAP socket layer initialized
  344.  
  345. [    0.151655] Bluetooth: SCO socket layer initialized
  346.  
  347. [    0.152113] cfg80211: Calling CRDA to update world regulatory domain
  348.  
  349. [    0.152205] cfg80211: World regulatory domain updated:
  350.  
  351. [    0.152357] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  352.  
  353. [    0.152449] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  354.  
  355. [    0.152601] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  356.  
  357. [    0.152754] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  358.  
  359. [    0.152846] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  360.  
  361. [    0.152998] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  362.  
  363. [    0.153761] earjack debugger probed
  364.  
  365. [    0.154219] Switching to clocksource gp_timer
  366.  
  367. [    0.189806] NET: Registered protocol family 2
  368.  
  369. [    0.190202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  370.  
  371. [    0.190874] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  372.  
  373. [    0.192217] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  374.  
  375. [    0.193010] TCP: Hash tables configured (established 131072 bind 65536)
  376.  
  377. [    0.193102] TCP: reno registered
  378.  
  379. [    0.193254] UDP hash table entries: 512 (order: 2, 16384 bytes)
  380.  
  381. [    0.193377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  382.  
  383. [    0.193834] NET: Registered protocol family 1
  384.  
  385. [    0.194262] Trying to unpack rootfs image as initramfs...
  386.  
  387. [    0.430184] Freeing initrd memory: 3244K
  388.  
  389. [    0.431344] Detected 5 counters on the L2CC PMU.
  390.  
  391. [    0.433602] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  392.  
  393. [    0.435495] pil_riva pil_riva: using secure boot
  394.  
  395. [    0.438547] pil_dsps pil_dsps: using secure boot
  396.  
  397. [    0.440103] pil_gss pil_gss: using secure boot
  398.  
  399. [    0.442270] smd_channel_probe_worker: allocation table not initialized
  400.  
  401. [    0.448191] msm_dsps driver version 4.03.
  402.  
  403. [    0.449870] NET: Registered protocol family 27
  404.  
  405. [    0.454051] lpass_fatal_init: lpass SSR driver init'ed.
  406.  
  407. [    0.454478] wcnss_8960: module initialized
  408.  
  409. [    0.455058] gss_8064_init: gss fatal driver init'ed.
  410.  
  411. [    0.455913] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  412.  
  413. [    0.456126] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
  414.  
  415. [    0.458721] acpuclk-8064 acpuclk-8064: CPU0: 15 frequencies supported
  416.  
  417. [    0.458873] acpuclk-8064 acpuclk-8064: CPU1: 15 frequencies supported
  418.  
  419. [    0.458965] acpuclk-8064 acpuclk-8064: CPU2: 15 frequencies supported
  420.  
  421. [    0.459148] acpuclk-8064 acpuclk-8064: CPU3: 15 frequencies supported
  422.  
  423. [    0.459819] kcal_ctrl_init
  424.  
  425. [    0.460399] persistent_ram: no valid data in buffer (sig = 0x00000000)
  426.  
  427. [    0.461406] msm_rpm_log_probe: OK
  428.  
  429. [    0.464367] mdm_modem_probe: registered mdm id 0
  430.  
  431. [    0.464489] mdm_do_first_power_on:id 0: Powering on modem for the first time
  432.  
  433. [    0.531115] mdm_pblrdy_change: mdm id 0: pbl ready:1
  434.  
  435. [    0.745704] usbcore: registered new interface driver hsic_sysmon
  436.  
  437. [    0.746192] audit: initializing netlink socket (disabled)
  438.  
  439. [    0.746345] type=2000 audit(0.750:1): initialized
  440.  
  441. [    0.862505] highmem bounce pool size: 64 pages
  442.  
  443. [    0.871875] NTFS driver 2.1.30 [Flags: R/W].
  444.  
  445. [    0.872333] fuse init (API version 7.18)
  446.  
  447. [    0.872821] msgmni has been set to 1226
  448.  
  449. [    0.876697] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  450.  
  451. [    0.877033] io scheduler noop registered
  452.  
  453. [    0.877216] io scheduler deadline registered
  454.  
  455. [    0.877735] io scheduler cfq registered (default)
  456.  
  457. [    0.878956] lm3530 probed
  458.  
  459. [    0.882618] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  460.  
  461. [    0.882954] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf00f8000
  462.  
  463. [    0.884205] mipi_lgit_lcd_probe start
  464.  
  465. [    0.884358] setting pdata->panel_info.fb_num to 3. type: 8
  466.  
  467. [    0.896780] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  468.  
  469. [    0.897115] load_565rle_image: Can not open /initlogo.rle
  470.  
  471. [    0.898916] setting pdata->panel_info.fb_num to 1. type: 7
  472.  
  473. [    0.900015] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  474.  
  475. [    0.900259] load_565rle_image: Can not open /initlogo.rle
  476.  
  477. [    0.900839] mdp4_dtv_vsync_init: ndx=0
  478.  
  479. [    0.901052] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf909008
  480.  
  481. [    0.901236] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  482.  
  483. [    0.901999] setting pdata->panel_info.fb_num to 1. type: 10
  484.  
  485. [    0.902334] Inside writeback_driver_init
  486.  
  487. [    0.902701] Inside writeback_probe
  488.  
  489. [    0.903525] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  490.  
  491. [    0.903769] load_565rle_image: Can not open /initlogo.rle
  492.  
  493. [    0.905478]
  494.  
  495. [    0.905478]  msm_vidc_enc: Inside vid_enc_init()
  496.  
  497. [    0.905875]
  498.  
  499. [    0.905875]  msm_vidc_enc: Inside vid_enc_vcd_init()
  500.  
  501. [    0.906790] smux_init: unable to create log context
  502.  
  503. [    0.907675] msm_serial_hs module loaded
  504.  
  505. [    0.907981] msm_serial_hsl: detected port #0
  506.  
  507. [    0.908225] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  508.  
  509. [    0.908469] msm_serial_hsl: console setup on port #0
  510.  
  511. [    0.908713] console [ttyHSL0] enabled
  512.  
  513. [    0.909110] msm_serial_hsl: driver initialized
  514.  
  515. [    0.910758] msm_rotator_probe: rotator_hw_revision=2
  516.  
  517. [    0.914268] diagchar initialized now
  518.  
  519. [    0.915977] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  520.  
  521. [    0.925286] brd: module loaded
  522.  
  523. [    0.929436] loop: module loaded
  524.  
  525. [    0.931848] anx7808 init gpio
  526.  
  527. [    0.964840] anx7808 dvdd is already on
  528.  
  529. [    0.994872] sp_tx_hardware_poweron: anx7808 power on
  530.  
  531. [    0.995910] sp_tx_chip_located: ANX7808 BA is found.
  532.  
  533. [    0.997222] sp_tx_vbus_powerdown: 3.3V output disabled
  534.  
  535. [    1.054875] sp_tx_hardware_powerdown: anx7808 power down
  536.  
  537. [    1.054967] sp_tx_set_sys_state: SP_TX To System State:
  538.  
  539. [    1.055058] sp_tx_set_sys_state: STATE_CABLE_PLUG
  540.  
  541. [    1.055730] tabla2x-slim tabla2x-slim: Platform data from board file
  542.  
  543. [    1.122142] wcd9xxx_check_codec_type: codec is tabla_codec
  544.  
  545. [    1.122447] wcd9xxx_check_codec_type: Read codec idbytes & version
  546.  
  547. [    1.122447] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  548.  
  549. [    1.122478]  byte_3[00000001] version = 2
  550.  
  551. [    1.124584] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  552.  
  553. [    1.124980] i2c-core: driver [tabla-i2c-core] using legacy resume method
  554.  
  555. [    1.126476] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  556.  
  557. [    1.126873] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  558.  
  559. [    1.127300] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  560.  
  561. [    1.128307] SCSI Media Changer driver v0.25
  562.  
  563. [    1.130291] rmnet_init: BAM devices[8]
  564.  
  565. [    1.154005] PPP generic driver version 2.4.2
  566.  
  567. [    1.154433] PPP BSD Compression module registered
  568.  
  569. [    1.154768] PPP Deflate Compression module registered
  570.  
  571. [    1.158675] PPP MPPE Compression module registered
  572.  
  573. [    1.159011] NET: Registered protocol family 24
  574.  
  575. [    1.159255] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  576.  
  577. [    1.159591] CSLIP: code copyright 1989 Regents of the University of California.
  578.  
  579. [    1.160109] wcnss_wlan probed in built-in mode
  580.  
  581. [    1.161788] usbcore: registered new interface driver asix
  582.  
  583. [    1.162124] usbcore: registered new interface driver cdc_ether
  584.  
  585. [    1.162551] usbcore: registered new interface driver net1080
  586.  
  587. [    1.163009] usbcore: registered new interface driver cdc_subset
  588.  
  589. [    1.163283] usbcore: registered new interface driver zaurus
  590.  
  591. [    1.163924] usbcore: registered new interface driver cdc_ncm
  592.  
  593. [    1.164260] msm_otg msm_otg: msm_otg probe
  594.  
  595. [    1.164504] msm_otg msm_otg: failed to get phy_clk
  596.  
  597. [    1.164962] msm_otg msm_otg: OTG regs = f01f2000
  598.  
  599. [    1.167709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  600.  
  601. [    1.181046] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  602.  
  603. [    1.181168] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  604.  
  605. [    1.204974] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  606.  
  607. [    1.224935] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  608.  
  609. [    1.225301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  610.  
  611. [    1.225453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  612.  
  613. [    1.225606] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  614.  
  615. [    1.225698] usb usb1: Manufacturer: Linux 3.4.0-Bricked-TWRP-Edition-g27406e9-05626-gc3e7a05 ehci_hcd
  616.  
  617. [    1.225850] usb usb1: SerialNumber: msm_hsic_host
  618.  
  619. [    1.226400] hub 1-0:1.0: USB hub found
  620.  
  621. [    1.226583] hub 1-0:1.0: 1 port detected
  622.  
  623. [    1.227926] usbcore: registered new interface driver cdc_acm
  624.  
  625. [    1.228017] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  626.  
  627. [    1.228109] Initializing USB Mass Storage driver...
  628.  
  629. [    1.228383] usbcore: registered new interface driver usb-storage
  630.  
  631. [    1.228475] USB Mass Storage support registered.
  632.  
  633. [    1.228719] usbcore: registered new interface driver ums-alauda
  634.  
  635. [    1.228872] usbcore: registered new interface driver ums-cypress
  636.  
  637. [    1.229116] usbcore: registered new interface driver ums-datafab
  638.  
  639. [    1.229269] usbcore: registered new interface driver ums-freecom
  640.  
  641. [    1.229513] usbcore: registered new interface driver ums-isd200
  642.  
  643. [    1.229665] usbcore: registered new interface driver ums-jumpshot
  644.  
  645. [    1.229909] usbcore: registered new interface driver ums-karma
  646.  
  647. [    1.230062] usbcore: registered new interface driver ums-onetouch
  648.  
  649. [    1.230306] usbcore: registered new interface driver ums-sddr09
  650.  
  651. [    1.230459] usbcore: registered new interface driver ums-sddr55
  652.  
  653. [    1.230703] usbcore: registered new interface driver ums-usbat
  654.  
  655. [    1.230947] usbcore: registered new interface driver usbserial
  656.  
  657. [    1.231130] usbserial: USB Serial Driver core
  658.  
  659. [    1.231283] usbcore: registered new interface driver qc_csvt
  660.  
  661. [    1.231466] USB Serial support registered for qc_csvt
  662.  
  663. [    1.231649] usbcore: registered new interface driver usb_ehset_test
  664.  
  665. [    1.231924] usbcore: registered new interface driver diag_bridge
  666.  
  667. [    1.232290] usbcore: registered new interface driver mdm_bridge
  668.  
  669. [    1.233236] usbcore: registered new interface driver ks_bridge
  670.  
  671. [    1.233358] ksb_init: init done
  672.  
  673. [    1.233786] msm_otg msm_otg: phy_reset: success
  674.  
  675. [    1.234610] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  676.  
  677. [    1.235006] mbim_init: initialize 1 instances
  678.  
  679. [    1.235220] mbim_init: Initialized 1 ports
  680.  
  681. [    1.237234] rndis_qc_init: initialize rndis QC instance
  682.  
  683. [    1.237753] android_usb gadget: Mass Storage Function, version: 2009/09/11
  684.  
  685. [    1.237875] android_usb gadget: Number of LUNs=1
  686.  
  687. [    1.238028]  lun0: LUN: removable file: (no medium)
  688.  
  689. [    1.238486] android_usb gadget: android_usb ready
  690.  
  691. [    1.240042] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  692.  
  693. [    1.240927] [Touch D]touch enable
  694.  
  695. [    1.445139] input: touch_dev as /devices/virtual/input/input2
  696.  
  697. [    1.467297] [Touch] common[1] finger[17] flash[52] button[0]
  698.  
  699. [    1.468457] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E028.
  700.  
  701. [    1.470410] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  702.  
  703. [    1.470502] [Touch] Touch driver is initialized
  704.  
  705. [    1.470990] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  706.  
  707. [    1.471997] using rtc device, pm8xxx_rtc, for alarms
  708.  
  709. [    1.472119] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  710.  
  711. [    1.472760] i2c /dev entries driver
  712.  
  713. [    1.473309] usbcore: registered new interface driver uvcvideo
  714.  
  715. [    1.473462] USB Video Class driver (1.1.1)
  716.  
  717. [    1.474744] __jrchoi: msm_sensor_init_module: E
  718.  
  719. [    1.503006] msm_eeprom_probe probe_fail
  720.  
  721. [    1.503433] msm_server_update_sensor_info mctl_node_name[0] = video1
  722.  
  723. [    1.531725] msm_eeprom_probe probe_fail
  724.  
  725. [    1.532214] msm_server_update_sensor_info mctl_node_name[1] = video3
  726.  
  727. [    1.536181] msm_cam_server_request_irq IRQ Router hw is not present.
  728.  
  729. [    1.536944] lm3559_init
  730.  
  731. [    1.543445] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  732.  
  733. [    1.543995] cpuidle: using governor ladder
  734.  
  735. [    1.544086] cpuidle: using governor menu
  736.  
  737. [    1.544636] mmc0: SDCC Version: 0x0000001a
  738.  
  739. [    1.545978] mmc0: bam physical base=0x12402000
  740.  
  741. [    1.546070] mmc0: bam virtual base=0xf0320000
  742.  
  743. [    1.546223] sps:BAM 0x12402000 is registered.
  744.  
  745. [    1.546314] mmc0: BAM device registered. bam_handle=0xeeff5a00
  746.  
  747. [    1.546711] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  748.  
  749. [    1.547169] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  750.  
  751. [    1.547443] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  752.  
  753. [    1.547565] mmc0: No card detect facilities available
  754.  
  755. [    1.549458] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  756.  
  757. [    1.549580] mmc0: Controller capabilities: 0x0000039e
  758.  
  759. [    1.549732] mmc0: 8 bit data mode enabled
  760.  
  761. [    1.549793] mmc0: 4 bit data mode disabled
  762.  
  763. [    1.549946] mmc0: polling status mode disabled
  764.  
  765. [    1.550068] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  766.  
  767. [    1.550160] mmc0: Slot eject status = 0
  768.  
  769. [    1.550312] mmc0: Power save feature enable = 1
  770.  
  771. [    1.550404] mmc0: SPS-BAM data transfer mode available
  772.  
  773. [    1.551411] usbcore: registered new interface driver usbhid
  774.  
  775. [    1.551503] usbhid: USB HID core driver
  776.  
  777. [    1.552510] ashmem: initialized
  778.  
  779. [    1.552693] logger: created 256K log 'log_main'
  780.  
  781. [    1.552907] logger: created 256K log 'log_events'
  782.  
  783. [    1.553181] logger: created 256K log 'log_radio'
  784.  
  785. [    1.553364] logger: created 256K log 'log_system'
  786.  
  787. [    1.554158] usbcore: registered new interface driver snd-usb-audio
  788.  
  789. [    1.555959] tabla_probe
  790.  
  791. [    1.556813] amp_enable: amp enable bypass(2)
  792.  
  793. [    1.556966] amp_enable: AMP_EN is set to 0
  794.  
  795. [    1.558126] msm_pcm_probe: dev name msm-voip-dsp
  796.  
  797. [    1.558553] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  798.  
  799. [    1.558705] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  800.  
  801. [    1.559926] msm_pcm_probe: dev name msm-pcm-dsp
  802.  
  803. [    1.560445] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  804.  
  805. [    1.560872] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  806.  
  807. [    1.561025] adding pm_qos request in low latency driver
  808.  
  809. [    1.561117] done adding pm_qos request in low latency driver
  810.  
  811. [    1.562246] msm_compr_probe: dev name msm-compr-dsp
  812.  
  813. [    1.562978] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  814.  
  815. [    1.564199] msm8930_audio_init: Not the right machine type
  816.  
  817. [    1.564291] msm_audio_init: Not the right machine type
  818.  
  819. [    1.564443] msm_audio_init: Not APQ8064 in I2S mode
  820.  
  821. [    1.565145] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  822.  
  823. [    1.565908] tabla codec probe...
  824.  
  825. [    1.632748] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  826.  
  827. [    1.632931] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  828.  
  829. [    1.633206] usb 1-1: Product: QHSUSB__BULK
  830.  
  831. [    1.633389] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  832.  
  833. [    1.671448] mmc0: new HS200 MMC card at address 0001
  834.  
  835. [    1.672852] mmcblk0: mmc0:0001 016G92 14.6 GiB
  836.  
  837. [    1.678620] Alternate GPT is invalid, using primary GPT.
  838.  
  839. [    1.679047]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  840.  
  841. [    1.693514] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  842.  
  843. [    1.694338] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  844.  
  845. [    1.695162] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  846.  
  847. [    1.696017] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  848.  
  849. [    1.696749] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  850.  
  851. [    1.697634] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  852.  
  853. [    1.698336] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  854.  
  855. [    1.699069] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  856.  
  857. [    1.699771] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  858.  
  859. [    1.700717] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  860.  
  861. [    1.701510] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  862.  
  863. [    1.702304] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  864.  
  865. [    1.703067] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  866.  
  867. [    1.703952] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  868.  
  869. [    1.704745] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  870.  
  871. [    1.706180] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  872.  
  873. [    1.710941] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  874.  
  875. [    1.711704] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  876.  
  877. [    1.712376] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  878.  
  879. [    1.713200] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  880.  
  881. [    1.713932] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  882.  
  883. [    1.714695] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  884.  
  885. [    1.715489] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  886.  
  887. [    1.716191] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  888.  
  889. [    1.716831] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  890.  
  891. [    1.717564] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  892.  
  893. [    1.718205] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  894.  
  895. [    1.718937] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  896.  
  897. [    1.719548] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  898.  
  899. [    1.720189] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  900.  
  901. [    1.720921] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  902.  
  903. [    1.721623] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  904.  
  905. [    1.722264] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  906.  
  907. [    1.722936] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  908.  
  909. [    1.723638] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  910.  
  911. [    1.724309] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  912.  
  913. [    1.724950] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  914.  
  915. [    1.727819] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  916.  
  917. [    1.728277] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  918.  
  919. [    1.732794] oprofile: using arm/armv7-krait
  920.  
  921. [    1.733099] u32 classifier
  922.  
  923. [    1.733190]     Actions configured
  924.  
  925. [    1.733282] Netfilter messages via NETLINK v0.30.
  926.  
  927. [    1.733526] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  928.  
  929. [    1.734411] ctnetlink v0.93: registering with nfnetlink.
  930.  
  931. [    1.734625] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  932.  
  933. [    1.734747] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  934.  
  935. [    1.735235] xt_time: kernel timezone is -0000
  936.  
  937. [    1.735785] ip_tables: (C) 2000-2006 Netfilter Core Team
  938.  
  939. [    1.736303] arp_tables: (C) 2002 David S. Miller
  940.  
  941. [    1.736456] TCP: cubic registered
  942.  
  943. [    1.736578] Initializing XFRM netlink socket
  944.  
  945. [    1.737433] NET: Registered protocol family 10
  946.  
  947. [    1.741156] Mobile IPv6
  948.  
  949. [    1.741309] ip6_tables: (C) 2000-2006 Netfilter Core Team
  950.  
  951. [    1.741706] IPv6 over IPv4 tunneling driver
  952.  
  953. [    1.742499] NET: Registered protocol family 17
  954.  
  955. [    1.742713] NET: Registered protocol family 15
  956.  
  957. [    1.743079] Bluetooth: RFCOMM TTY layer initialized
  958.  
  959. [    1.743323] Bluetooth: RFCOMM socket layer initialized
  960.  
  961. [    1.743506] Bluetooth: RFCOMM ver 1.11
  962.  
  963. [    1.743689] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  964.  
  965. [    1.743995] Bluetooth: BNEP filters: protocol multicast
  966.  
  967. [    1.744178] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  968.  
  969. [    1.744697] L2TP core driver, V2.0
  970.  
  971. [    1.744910] PPPoL2TP kernel driver, V2.0
  972.  
  973. [    1.745734] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  974.  
  975. [    1.746284] Registering SWP/SWPB emulation handler
  976.  
  977. [    1.746467] clock_late_init: Removing enables held for handed-off clocks
  978.  
  979. [    1.751930] [MPDEC]: msm_mpdec_init init complete.
  980.  
  981. [    1.755409] MSM Watchdog Initialized
  982.  
  983. [    1.773935] registered taskstats version 1
  984.  
  985. [    1.775553] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-12-06 01:32:27 UTC (1386293547)
  986.  
  987. [    1.776499] read_ocv_trim: program rev reg is 0x33
  988.  
  989. [    1.776560] read_ocv_trim: trim reg is 0x41
  990.  
  991. [    1.776651] read_ocv_trim: trim delta is 8
  992.  
  993. [    1.776743] pm8921_is_usb_chg_plugged_in: called before init
  994.  
  995. [    1.796551] pm8921_is_usb_chg_plugged_in: called before init
  996.  
  997. [    1.797802] pm8921_is_usb_chg_plugged_in: called before init
  998.  
  999. [    1.798199] ocv_ir_compensation: comp ocv = 3784515, ocv = 3779106, ibatt_ua = 24700, rbatt_mohm = 219
  1000.  
  1001. [    1.798473] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  1002.  
  1003. [    1.798779] pm8921_is_batfet_closed: called before init
  1004.  
  1005. [    1.825270] pm8921_is_usb_chg_plugged_in: called before init
  1006.  
  1007. [    1.825484] adjust_soc: ibat_ua = 325700, vbat_uv = 3720723, soc = 51, batt_temp=400
  1008.  
  1009. [    1.828261] pm8921_get_batt_state: called before init
  1010.  
  1011. [    1.828475] pm8921_bms_probe: OK battery_capacity_at_boot=51 volt = 3737634 ocv = 3863875
  1012.  
  1013. [    1.830428] power_supply usb: driver failed to report `present' property: 4294967274
  1014.  
  1015. [    1.830886] power_supply usb: driver failed to report `present' property: 4294967274
  1016.  
  1017. [    1.831252] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  1018.  
  1019. [    1.831680] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  1020.  
  1021. [    1.833511] pm8921_get_batt_state: called before init
  1022.  
  1023. [    1.836380] pm8921_get_batt_state: called before init
  1024.  
  1025. [    1.859362] wlc: bq51051b_wlc_probe: probe
  1026.  
  1027. [    1.859545] wlc: bq51051b_wlc_hw_init: hw_init
  1028.  
  1029. [    1.860064] power_supply wireless: driver failed to report `present' property: 4294967274
  1030.  
  1031. [    1.860674] [Touch] CHARGER = 1
  1032.  
  1033. [    1.860705] power_supply wireless: driver failed to report `present' property: 4294967274
  1034.  
  1035. [    1.861162] batt_temp_ctrl_init
  1036.  
  1037. [    1.861498] batt_temp_ctrl_probe
  1038.  
  1039. [    1.863634] android_vibrator: default amplitude 88
  1040.  
  1041. [    1.863970] android vibrator probed
  1042.  
  1043. [    1.864459] fsa8008 init
  1044.  
  1045. [    1.865466] fsa8008 probe
  1046.  
  1047. [    1.867022] input: hs_detect as /devices/virtual/input/input5
  1048.  
  1049. [    1.867633] ALSA device list:
  1050.  
  1051. [    1.867968]   #0: apq8064-tabla-snd-card
  1052.  
  1053. [    1.869922] Freeing init memory: 1036K
  1054.  
  1055. [    2.005463] unplug_check_worker: usb_now=500, usb_target = 500
  1056.  
  1057. [    2.025484] msm_otg msm_otg: Avail curr from USB = 1500
  1058.  
  1059. [    2.025728] msm_otg msm_otg: current: 0 -> 1500 (mA)
  1060.  
  1061. [    2.026033] pm_power_set_property_usb: usb_target_ma 1500
  1062.  
  1063. [    2.027559] msm_otg msm_otg: USB in low power mode
  1064.  
  1065. [    2.075598] type=1403 audit(1386293547.790:2): policy loaded auid=4294967295 ses=4294967295
  1066.  
  1067. [    2.076117] SELinux: Loaded policy from (null)
  1068.  
  1069. [    2.205402] unplug_check_worker: usb_now=700, usb_target = 1500
  1070.  
  1071. [    2.361605] init: cannot open '/initlogo.rle'
  1072.  
  1073. [    2.367037] init: Unable to open persistent property directory /data/property errno: 2
  1074.  
  1075. [    2.371555] enable_store: android_usb: already disabled
  1076.  
  1077. [    2.372409] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
  1078.  
  1079. [    2.372897] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
  1080.  
  1081. [    2.373386] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  1082.  
  1083. [    2.379764] adb_open
  1084.  
  1085. [    2.380100] adb_bind_config
  1086.  
  1087. [    2.446482] mipi_dsi_controller_cfg: DSI status=8 failed
  1088.  
  1089. [    2.446574] mipi_dsi_panel_power: mipi lcd function started status = 1
  1090.  
  1091. [    2.446696] ext_dsv_load: Failed to create debugfs directory
  1092.  
  1093. [    2.450297]  mipi_dsi_panel_power : reset start.
  1094.  
  1095. [    2.472302] mipi_lgit_lcd_on started
  1096.  
  1097. [    2.495681] mipi_lgit_lcd_on finished
  1098.  
  1099. [    3.005890] unplug_check_worker: usb_now=850, usb_target = 1500
  1100.  
  1101. [    3.205920] unplug_check_worker: usb_now=900, usb_target = 1500
  1102.  
  1103. [    3.651854] EXT4-fs (mmcblk0p23): recovery complete
  1104.  
  1105. [    3.656035] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
  1106.  
  1107. [    3.799938] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
  1108.  
  1109. [    3.898519] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
  1110.  
  1111. [    3.952052] EXT4-fs (mmcblk0p22): recovery complete
  1112.  
  1113. [    3.956569] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: (null)
  1114.  
  1115. [    3.973905] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: (null)
  1116.  
  1117. [    4.005890] unplug_check_worker: usb_now=1100, usb_target = 1500
  1118.  
  1119. [    4.098611] SELinux:  Context u:object_r:audio_firmware_file:s0 is not valid (left unmapped).
  1120.  
  1121. [    4.144513] SELinux:  Context u:object_r:download_file:s0 is not valid (left unmapped).
  1122.  
  1123. [    4.205829] unplug_check_worker: VIN: usb_now=900, usb_target = 900
  1124.  
  1125. [   22.105844] adjust_soc: ibat_ua = -178000, vbat_uv = 3821680, soc = 53, batt_temp=397
  1126.  
  1127. [   26.060521] [MPDEC]: CPU[1] on->off | Mask=[1011] | time online: 26064
  1128.  
  1129. [   26.321287] [MPDEC]: CPU[2] on->off | Mask=[1001] | time online: 26325
  1130.  
  1131. [   26.582084] [MPDEC]: CPU[3] on->off | Mask=[1000] | time online: 26586
  1132.  
  1133. [   26.968228] [MPDEC]: CPU[1] off->on | Mask=[1100]
  1134.  
  1135. [   28.921013] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 1953
  1136.  
  1137. [   34.908011] [MPDEC]: CPU[1] off->on | Mask=[1100]
  1138.  
  1139. [   38.160964] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 3253
  1140.  
  1141. [   39.718357] [MPDEC]: CPU[1] off->on | Mask=[1100]
  1142.  
  1143. [   42.105814] adjust_soc: ibat_ua = -281500, vbat_uv = 3845515, soc = 53, batt_temp=397
  1144.  
  1145. [   44.141828] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 4424
  1146.  
  1147. [   46.998229] [MPDEC]: CPU[1] off->on | Mask=[1100]
  1148.  
  1149. [   48.037417] [MPDEC]: CPU[2] off->on | Mask=[1110]
  1150.  
  1151. [   53.500076] [MPDEC]: CPU[2] on->off | Mask=[1100] | time online: 5463
  1152.  
  1153. [   53.761330] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 6763
  1154.  
  1155. [   54.287349] [MPDEC]: CPU[1] off->on | Mask=[1100]
  1156.  
  1157. [   54.549427] [MPDEC]: CPU[1] on->off | Mask=[1000] | time online: 262
  1158.  
  1159. [   56.253471] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: (null)
  1160.  
  1161. [   56.447153] msm_hsic_host msm_hsic_host: remove, state 1
  1162.  
  1163. [   56.447276] usb usb1: USB disconnect, device number 1
  1164.  
  1165. [   56.447337] usb 1-1: USB disconnect, device number 2
  1166.  
  1167. [   56.449565] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  1168.  
  1169. [   56.657195] mipi_lgit_lcd_shutdown finished
  1170.  
  1171. [   56.657347] Restarting system.
  1172.  
  1173. [   56.657439] Going down for restart now
  1174.  
  1175.  
  1176.  
  1177. No errors detected
  1178.  
  1179. Boot info:
  1180.  
  1181. Last boot reason: reboot
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!