le40c650 debug

>> ONBOOT :: 0x81c60204 0x12821284
normal boot [sboot_auth_kernel_normalboot:154]
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!

================================================================================

 SAMSUNG: v2.6.24_SELP_4.3.x_GA(P20)

         (Detailed Information: /sys/selp/vd/lspinfo/summary)

================================================================================


init started: SELP-BusyBox v1.6.0-VD Linux SELP.4.2.1.x (2010-01-21 19:31:50 KST) multi-call binary

starting pid 29, tty '/dev/ttyS1': '/etc/rcS'
/etc/rcS start!!!!
	2.0 : 0 : 256
=====================================================
  ROOTFS VERSION : 65-1G-65
=====================================================
	it's not dev!

starting pid 43, tty '/dev/ttyS1': '/bin/sh'
-sh: id: not found
2nd partition!!
/dtv/PART_FLAG_1  is detected...
2nd Partition is selected...

----------- Kernel  Loading End------------

Application is started..
##### System Execution!!! #####


 Call.. CFastBoot()

TDaStore Building...
TDaTuner0 Building...
TDaDemodulator0 Building...
TDaTuner0 Building...
TDaDemodulator0 Building...
TDaTunerSemcoISDB Building...
TDaDemodSemcoISDB Building...
TDaTuner0 Building...
TDaDemodulator0 Building...
TDaTunerSemco Building...
TDaDemodulator Building...
TDaTuner5 Building...
TDaDemodulator5 Building...
TDaTuner6 Building...
TDaDemodulator6 Building...
TDaAudioAmp0 Building...
TDaAudioAmp1 Building...
TDaSystem Building...
TDaAudioProcessor Building...
SDP96 Processor Building...
LEDDriver Building...
SENSORDriver Building...
TDaScaler0 Building...
TDaScaler1 Building...
TDaAnalogVideoProcessor Building...
TDaDemux 0 Building...
TDaDemux 1 Building...
TDaMpeg Building...
TDaMpeg Building...
TDaCompProcessor Building...
TDaHdmiProcessor Building...
TDaPcProcessor Building...
TDaHdmiSwitch Building...
TDaCommonInterface Building...
TDaFeeder Building...
TDaImage Building...
TDaTeleText Building...
TDaRecorder Building...
TDaAnalogVideoSwitch Building...
TDaStore PC DDC Building...
TDaStore HDMI1 DDC Building...
TDaStore HDMI2 DDC Building...
TDaStore HDMI3 DDC Building...
TDaStore HDMI4 DDC Building...
FRCS/FRC200 TDaPanel0[LCD] Building...
FRCS/FRC200 TDaVideoEnhancer0[LCD] Building...
TDaPanel1[PDP] Building...
TDaVideoEnhancer1[PDP] Building...
FRCS/FRC200 TDaPanel2[LCD] Building...
3D IC Building...
TDaCP0 Building...
TDaCP1 Building...
[BootFromMicom]Get Boot Status : 1
TDcValenciaGpio::Create...
=== USE BSP RESET ===
############## Find Factory_Part1.dat File in mtd_exe ##################
############## Find Factory_Part2.dat File in mtd_exe ##################

		FixedId : Nvram[160] vs File[160]

		WBId : Nvram[49] vs File[49]

		WB ADC(Part1) Id : Nvram[31] vs File[31]

		EER Basic Id : Nvram[191] vs File[191]

		EERId Custom : Nvram[131] vs File[131]

		FACId : Nvram[191] vs File[191]
Trying to free already-free IRQ 0

WARNING: This program not compiled for -t option


##########   SysConfigType = 0001e644
########################################################################
##########   Memory Configuration = SYS_CONF_64BIT_768MB_DUAL_DECODING_REV0
########################################################################
 m_ControlGPIO_FRCPortChange[PASS]
ID_SELECT_LCD PDP:LCD,GPIO_LCD_PDP SEL:LCD
CAM Card Status changed : 2 -> 0
[ERROR][Drv_IIC_RW_Chelsea():859] i2c write operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0x4a
[ERROR][Drv_IIC_RW_Chelsea():871] requested sub addr : 0x0
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 1
[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xcc
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0a4
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 1
ЎЪ Model : 11, Panel Inch : 21, SubWoofer : 1
*************************t_PCA9546_Read : Error(ffffffff)

	>>[ERR:TDsSta369BwsAudioAmp.cpp] Create():303 ЎЪ Check Factory, Num of Amp is wrong(1).
[ERROR][Drv_IIC_RW_Chelsea():859] i2c write operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xd4
[ERROR][Drv_IIC_RW_Chelsea():871] requested sub addr : 0x0
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2


	>>[ERR:FRCQShare.cpp] t_FRCQ_Panel_FRCQ_Init():24013 [QQQQQQQQQQQ]FRCQ Check NG!!

FRCQ is NOT DETECTED !!!!

6 Series t_FRCS_ExistCheck ...[NONE] line:10701

	>>[ERR:FRCSShare.cpp] t_FRCS_Panel_FRCS_Init():12995 # FRCS doesn't exist, Pass Init #


	>>[ERR:FRCSShare.cpp] t_FRCS_Panel_ResetMajorFWCmd():13015 FRCS is NOT DETECTED !!!!


6 Series t_FRC200_ExistCheck ...[NONE] line:591

	>>[ERR:FRC200Share.cpp] t_FRC200_Panel_FRC200_Init():1582 # FRC200 doesn't exist, Pass Init #


	>>[ERR:FRC200Share.cpp] t_FRC200_Panel_ResetMajorFWCmd():1496 FRC200 is NOT DETECTED !!!!



	>>[ERR:TDsFRC200Panel.cpp] Create():70 FRC200 Init Error~!

LocalDimming init Error!!
DevLdAsic_Init <IN>
LD is not supported in (LC650)
 Local Dimming Initialize FAIL!!
DevLdAsic_Init <OUT> m_bFlagCreate:1, ret:-2

	>>[ERR:TDsLocalDimmingPanel.cpp] Create():1344 LDAsic Init Error~!

CheckExist3D_IC: 3D is not supported !!!
t_N240_WriteFactoryVer Success
INIT_LVDS_POWER_CONTROL - DOWN [Valencia]
INIT_LVDS_POWER_CONTROL - [LD] is Not Supported.

	>>[ERR:TDcValenciaI2C.cpp] Create():108 Already Create...

[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xca
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0ec
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2
[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xca
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0ec
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2
[ERROR][Drv_IIC_RW_Chelsea():859] i2c read operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0xca
[ERROR][Drv_IIC_RW_Chelsea():875] requested sub addr : 0x0ec
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 2

	>>[ERR:READShare.cpp] m_READ_READING2_Read2IIC():2496 [READING2] addr = 0x00ec Read fails

ЎаЎбЎаЎбЎаЎбЎаЎбЎаt_READ_Check : [E_FRC_TYPE_READ_120] ЎбЎаЎбЎаЎбЎаЎбЎаЎбЎаЎбЎаЎбЎаЎб
[ERROR][Drv_IIC_RW_Chelsea():859] i2c write operation failed
[ERROR][Drv_IIC_RW_Chelsea():860] requested channel : 0
[ERROR][Drv_IIC_RW_Chelsea():861] requested chip id : 0x90
[ERROR][Drv_IIC_RW_Chelsea():871] requested sub addr : 0x0
[ERROR][Drv_IIC_RW_Chelsea():878] requested byte count : 0
t_READ_Sensor_Temp_CheckExist(): Sensor NOT Available!
############# [READING] ETC_50Hz############
Cabinet Type : T_R_BLK [577]

m_CalculateType= 1
m_SensorGain= 16
m_fConstant[0]= 6630.000000
m_fConstant[1]= 1.973000
m_fConstant[2]= 0.046729
m_fConstant[3]= 0.070100
Brightness Sensor is OK!!!
INIT_LVDS_POWER_CONTROL - UP [Valencia]
INIT_LVDS_POWER_CONTROL - [LD] is Not Supported.
## Panel : 21, Model : 11
### eSrc 0x0, Audio Format [Not Support String 0], DDCompMode RF, Factory value -9, Real set value to SDAL 0
[BootFromMicom]Get Boot Status : 1
[BootFromMicom]Get Master Power Reset : [0]
		>>> t_PlayMelody 0
-------------------------------------------
===    Selected Tuner on Factory : 1 th !!! ===
-------------------------------------------
Called... t_ExistCheck_TEA6425 = 1....(Analog_Video_Switch_IC)
FBInfo.Validation = 1
FBInfo.ChannelStatus = 0
FBInfo.SourceID = 51
FBInfo.SourceMode = 257
FBInfo.AudioDescriptionID = 65534, AudioType = 65534
		>>> t_GetFastBootInfo 0
Register value : 9287
ЎбЎбЎбЎб SiI9287 DETECTED !!!!!!!
Ўб SIL9287Monitor Create!
##### TDsSystem::SetDependence Mode [2]
[TDaSystem::ValenciaPivotModeConfig] PivotConfig Size [1920 * 1080], Mode [3]
[TDaScaler::GetInitVideoConfig] VideoConfig: 0x321
[TDaScaler::GetInitVideoConfig] Model:LC650 Valencia EvenFirst
[TDaScaler::GetInitVideoConfig] VideoConfig: 0x321 is already set.
[ Fast Boot ] [ Panel Control Type : 2 ]
################## Arsenal is Normal ##################
Arsenal Reg : 0x805, Val : 0x1601
		>>> t_CheckSystemNormal 0
==== HDMI [SRC num :1], [ID: 0x47], [HP STATE: 0xf]
Set LNB Power!!! 1
[ Fast Boot ] [ Panel Control Type : 1 ]
 m_stFRC200PanelResInfo.eRes [21]
 m_stFRC200PanelResInfo.tSetResInfo.vFreq [50000]
[STEP1]TDsFRC200Panel::SetResolutionInfo
[STEP3]TDsFRC200Panel::SetResolutionInfo
[STEP4]TDsFRC200Panel::SetResolutionInfo
##### [FRC200] 50Hz   3D_OFF or GameON  SET_50Hz  #####
[STEP5]TDsFRC200Panel::SetResolutionInfo
ChannelStatus 0 TV Child Lock 0
		>>> t_CheckFastBoot 1
============ CHECK FAST BOOT Exception ===========
====== Send Jack ID Command to SubMicom ! =====

	>>[ERR:TDsLocalDimmingPanel.cpp] SetDependence():1470 Not Define Dependence !!!


	>>[ERR:TDsREADPanel.cpp] SetDependence():207 Not Used...

SetPDPModulePower : ON, ret : 0
[ Fast Boot ] [ Panel Control Type : 3 ]
[   61|5.643653]	[MOIP_TRC] CMoIPStreamManager::CMoIPStreamManager() (2176)


	## Core Software Platform (TM) 1.1 : DTP-SP-0072 (RELEASE)
		 Copyright (C) SAMSUNG Electronics Co.,Ltd.


CSP No sched_yield()
TCMW::Initialize() start

ProfileManager::t_CompareMagicKey() line[571]	Offset 0 Size 4]

ProfileManager::t_CompareMagicKey() line[579]	CRC: 82250643, magicKey: 82250643
ProfileManager::Init() line[74]	Mark 2285

[DEFAULT/Debugging] 0 : FlagHotelMode, hotelProductType[0]
[DEFAULT/Debugging] 1 : FlagUseHotelMixedMap, factoryMapUse[0]
[DEFAULT/Debugging] 2 : FlagHospitalMode[0]
[DEFAULT/Info] 3 : ####Reset TCTvManagerBase::Create####


GetTotalChMapPartition, Total mtd_rwarea Partition Size [24] MB[DEFAULT/Info] 4 : ####Reset Channel Magic Key !  old = 1001007 new = 1001007 !!!####


[M_TMS/Fatal] 5 : TCChSortModeDB::LoadSortMode Cannot Open File /mtd_chmap/ChSortMode

[DEFAULT/Fatal] 6 : TCWindowInfoManager_DVB::t_ChangeCountry  (WindowId:1 TvMode:1  Country:66,BroadCasterId :0)
[DEFAULT/Fatal] 7 : TCWindowInfoManager_DVB::t_ChangeCountry  (WindowId:2 TvMode:0  Country:66,BroadCasterId :0)
[DEFAULT/Fatal] 8 : TCWindowInfoManager_DVB::t_ChangeCountry  (WindowId:3 TvMode:1  Country:66,BroadCasterId :0)
[DEFAULT/Info] 9 :



[DEFAULT/Info] 10 : [CI+ information] Make sure that this is DVB CI+ product.
[DEFAULT/Info] 11 : [CI+ information] Make sure that production certificates and keys should used for this product.



[DEFAULT/Fatal] 12 : TCWindowInfoManager_DVB::t_ChangeCountry  (WindowId:5 TvMode:0  Country:66,BroadCasterId :0)
TCMW::Initialize() end
0 (4294967295): Shadow 2.1 (Release Version : DTP-BP-Shadow-0119-Release) is being initialized.
	---[SPCSCREEN] : ChangeScreenRes() already screen0 resolution 960 * 540.. return.
	---[SPCSCREEN] : ChangeScreenRes() already screen0 resolution 960 * 540.. return.
1 (4294967295): Initialize Cubic v1.0.56

################################
t_InitializeComponentsProfile
################################


[DTVInputService::t_Create] m_nKeyInputTime = 6410



################################
t_InitComponents
################################SAMSUNG (R) Core SW Platform 2.0 for CSP 1.1
 Copyright (C) SAMSUNG Electronics Co.,Ltd.

APP_INITIALIZE(); end

[DEFAULT/Debugging] 13 : MW Initilize Completed
[DEFAULT/Debugging] 14 : WaitForFastBoot End
 TPCTv::Power, ######## 3 ######## Param : 0
 TPCTv::Power, Return Value Check : 1
[DEFAULT/Debugging] 15 : Display::t_TurnOn(), t_windowId=0
### eSrc 0x0, Audio Format [Not Support String 0], DDCompMode RF, Factory value -9, Real set value to SDAL 0
[DEFAULT/Debugging] 16 : TCDisplay::m_SetChannel(), tuneMode[0], window[0] Ch ptc:14[14-0] !!!)
==================== DCDsmManager pid = 61
[DEFAULT/Debugging] 17 : [TCDisplay::m_PrepareSetChnnel] end.
[DEFAULT/Debugging] 18 : [TCDisplay::m_SetInitialRFChange] Called
==================================================
------------------- NORMAL MODE ------------------
==================================================
[DEFAULT/Debugging] 19 : [m_ReserveNextSource]: Called, Window [0] Source [0]
[DEFAULT/Debugging] 20 : [TCTvSourceConf::Tune] Start
==================================================
--------------- NORMAL MODE COMPLETE--------------
==================================================
System proccess  >>>>>  [ SYSTEM_READY ]
[Is Reading] reading:1, Channel:0, slave addr:[0xCC][0x0]
Start System Monitor -> Reading:1, Channel:0x0, Slave_addr:[0xCC][0x0]
[AP_FRONTRUNNER/Fatal] 21 : [t_Create][line:99] Wired Module Loaded...

[SSL_library_init] Initializing...
[SSL_library_init] already intialized...
[DevMgr/Fatal] 22 : [GetInstance:135] Device Manager START...
[AP_FRONTRUNNER/Fatal] 23 : [t_Create][line:108] DeviceManager Created...

[DevMgr/Fatal] 24 : [t_OnEvent:304] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
[DEFAULT/Debugging] 25 : [TCTvSourceConf::Tune] End
[DEFAULT/Debugging] 26 : [TCSourceConf::Reserve] [0][51] Called
[DEFAULT/Debugging] 27 : [TCSourceConf::Reserve] [0] End
[DEFAULT/Debugging] 28 : [TCSourceConf::Connect] [0][51] Called
[TPAWindow.cpp][ConnectSource][WID:0][CALL]..
TDResolution_k : [19]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
GetConnectionConfig eSrc : [0101]
Source : 0x101  Window Type : 0  Back End Decoder Type : 5, tdRet=0
### eSrc 0x101, Audio Format [Not Support String 0], DDCompMode RF, Factory value -9, Real set value to SDAL -144
[TPAWindow.cpp][ConnectSource][WID:0][END]..
[DEFAULT/Debugging] 29 : [TCSourceConf::Connect] [0] End

	>>[ERR:TDiAnalogVideoProcessor.cpp] GetResolutionMonitorFilterTime():325 Null Fuction Call !!!Must Check Implementation Code...

[DEFAULT/Debugging] 30 : [TCSourceConf::Stop] Start
[DEFAULT/Debugging] 31 : [TCSourceConf::Stop:209] End
[DEFAULT/Debugging] 32 : [TCSourceConf::Start] Start
[DEFAULT/Debugging] 33 : Source Start - before
[DEFAULT/Debugging] 34 : Source Start - after [1]
[DEFAULT/Debugging] 35 : [pTpcWindow->SetResolution] [17][51] Start
[N240] Set3DMute => 1, line:2675
##### Mute [ON] In SetResolution Sequence~!!! #####
TDResolution_k : [18]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
#TDResolution_k : [18]
#TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
 m_stFRC200PanelResInfo.eRes [18]
 m_stFRC200PanelResInfo.tSetResInfo.vFreq [50000]
[STEP1]TDsFRC200Panel::SetResolutionInfo
[STEP3]TDsFRC200Panel::SetResolutionInfo
[STEP4]TDsFRC200Panel::SetResolutionInfo
##### [FRC200] 50Hz   3D_OFF or GameON --> Same 50hz setting, Pass~! #####
[STEP5]TDsFRC200Panel::SetResolutionInfo

	>>[ERR:TDsFRCQPanel.cpp] SetFactoryItem():394 Not support FactoryItem uid =[320] [3D TEMPERATURE]


	>>[ERR:TDsFRCSPanel.cpp] SetFactoryItem():481 Not support FactoryItem uid =[320] [3D TEMPERATURE]


	>>[ERR:TDsFRC200Panel.cpp] SetFactoryItem():437 Not support FactoryItem uid =[320] [3D TEMPERATURE]

*****Game Mode OFF
[N240] Set3DMute => 0, line:2675
##### Mute [OFF] In SetResolution Sequence~!!! #####
[DEFAULT/Debugging] 36 : [0]Window SetResolution returned 1
[DEFAULT/Debugging] 37 : m_SetInitialRFChange, event sent[0][0][3]
[DEFAULT/Debugging] 38 : TCDisplay::m_PostSetChannel, ems.SendEvent[CHANNEL_CANGED]
[DEFAULT/Debugging] 39 : Display::t_TurnOn(), t_windowId=3
[DEFAULT/Debugging] 40 : TCDisplay::m_SetChannel(), tuneMode[0], window[3] Ch ptc:14[14-0] !!!)
[DEFAULT/Debugging] 41 : [TCDisplay::m_PrepareSetChnnel] end.
[DEFAULT/Debugging] 42 : [TCDisplay::m_SetInitialRFChange] Called
[DEFAULT/Debugging] 43 : [m_ReserveNextSource]: Called, Window [3] Source [0]
[DEFAULT/Debugging] 44 : [TCSourceConf::Reserve] [3][51] Called
[DEFAULT/Debugging] 45 : [TCSourceConf::Connect] [3][51] Called
[TPAWindow.cpp][ConnectSource][WID:3][CALL]..
TDResolution_k : [18]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
Source : 0x101  Window Type : 3  Back End Decoder Type : 5, tdRet=0
[TPAWindow.cpp][ConnectSource][WID:3][END]..
[DEFAULT/Debugging] 46 : [TCSourceConf::Connect] [3] End
TDResolution_k : [18]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
[DEFAULT/Debugging] 47 : m_SetInitialRFChange, event sent[3][0][3]
[DEFAULT/Debugging] 48 : TCDisplay::m_PostSetChannel, ems.SendEvent[CHANNEL_CANGED]
[DEFAULT/Debugging] 49 : [t_OnSystemReady:5688] First, Display Channel Banner(7330)
[DEFAULT/Debugging] 50 : [pTpcWindow->SetResolution] [0][51] Start
[N240] Set3DMute => 1, line:2675
##### Mute [ON] In SetResolution Sequence~!!! #####
TDResolution_k : [19]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
#TDResolution_k : [19]
#TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
 m_stFRC200PanelResInfo.eRes [19]
 m_stFRC200PanelResInfo.tSetResInfo.vFreq [60000]
[STEP1]TDsFRC200Panel::SetResolutionInfo
[STEP3]TDsFRC200Panel::SetResolutionInfo
[STEP4]TDsFRC200Panel::SetResolutionInfo
 [FRC200] _60Hz #####
[STEP5]TDsFRC200Panel::SetResolutionInfo
[NETWORK_MIDDLE] NetworkManager
[NETWORK_MIDDLE] Create
NetworkDB::GetInstance()
NetworkDB()
NetworkDeviceMonitor::GetInstance()
NetworkDHCPMonitor::GetInstance()
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] New NetworkEventManager() -> Success
[NETWORK_MIDDLE] NetworkEventManager::Create()
[NETWORK_MIDDLE] NetworkEventManager::Create()  m_Mutex.Create Success
[NETWORK_MIDDLE] NetworkEventManager::Create() ->Success
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
NetworkDeviceMonitor::GetInstance()
Already created...

 ######## CreateNetworkManager [ StartDeviceMonitoring ]######
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[DEV_ERROR  ] [GetPartitionSize] invalid path : NONE
	DLNA: DLNA UPnP_CD_RegisterCallback(dmr/SamsungMRDesc.xml) --> handle [0]

	>>[ERR:TDsFRCQPanel.cpp] SetFactoryItem():394 Not support FactoryItem uid =[320] [3D TEMPERATURE]


	>>[ERR:TDsFRCSPanel.cpp] SetFactoryItem():481 Not support FactoryItem uid =[320] [3D TEMPERATURE]


	>>[ERR:TDsFRC200Panel.cpp] SetFactoryItem():437 Not support FactoryItem uid =[320] [3D TEMPERATURE]

[N240] Set3DMute => 0, line:2675
##### Mute [OFF] In SetResolution Sequence~!!! #####
[DEFAULT/Debugging] 51 : [0]Window SetResolution returned 1
[DEFAULT/Debugging] 52 : [pTpcWindow->SetResolution] [0][51] Start
TDResolution_k : [19]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
	DLNA: DLNA UPnP_CD_RegisterCallback(pmr/PersonalMessageReceiver.xml) --> handle [1]
        ++++++++ [CCPTvUtil:GetModelCode:24] ModelCode:TV-32C650
[dlna at 1] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this
        ++++++++ [CCPTvUtil:GetModelCode:24] ModelCode:TV-32C650
[dlna at 1] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
	DLNA: DLNA UPnP_CD_RegisterCallback(/ruis/RemoteUIServerDescLevel1.xml) --> handle [2]
[   61|8.135005]	[MOIP_TRC] bool CMoIPMain::Create() (352)
[AP_MOIP/Fatal] 53 : The file /mtd_moip/moip/sign.txt couldn't be opened
[   61|8.149533]	MK: Time for update. Getting ready to activate MoIP application.
[AP_FRONTRUNNER/Fatal] 54 : [t_OnEvent][line:215] MESSAGE_APP_INITIALIZED received

MESSAGE_APP_INITIALIZED~!
[LoadUSBModules:1232] Start...
[DEFAULT/Debugging] 55 : [3]Window SetResolution returned 1
[AP_SWU/Fatal] 56 : [GetFactoryVersion][line:3874] Factory MODEL : T-VALDEUC, Factory MODULE : 002002, Factory DATE : 100910, Factory Original Version: 2002.0
	insmod usbcore...
[AP_SWU/Fatal] 57 : [IsDualBSP][line:1449] This is Dual BSP!!!!!!!!!!!!!!!!!!
[AP_SWU/Fatal] 58 : [RecoverVersion][line:3676] LOC VERSION [SWU_T-VALDEUC_002002_I04_EK000DK000KK000RK000_100909
]
[AP_SWU/Fatal] 59 : [RecoverVersion][line:3677] NEW VERSION [SWU_T-VALDEUC_002002_I04_EK000DK000KK000RK000_100909
]
[AP_SWU/Fatal] 60 : [RecoverVersion][line:3686] Version is same. No Write
	insmod ehci_hcd...
[NETWORK_MIDDLE]  NetworkManager::AddConnection [eth0]
	insmod ohci_hcd...
NetworkDB::GetInstance()
Already created...
[NETWORK_MIDDLE] DNS(4) = DHCP
[NETWORK_MIDDLE] HOST(15) = 192.168.195.107
[NETWORK_MIDDLE] GATEWAY(7) = 0.0.0.0
[NETWORK_MIDDLE] NETMASK(13) = 255.255.255.0
[NETWORK_MIDDLE] DNS(7) = 0.0.0.0
[NETWORK_MIDDLE] DNS_MODE = DHCP
NetworkDHCPMonitor::GetInstance()
Already created...
[NETWORK_MIDDLE] ####### WiredConnection::Activate [ DevName : eth0 ] #######

=> Auto : ifconfig eth0 up
	insmod usb_storage...
USB : Exit Load USB module... Elapsed Time:660msec.
[AP_FRONTRUNNER/Fatal] 61 : [t_OnEvent][line:225] USB Module Loaded...

NetworkDB::GetInstance()
Already created...
[NETWORK_MIDDLE] Ethernet link UP Result [ 1 ]

[NETWORK_MIDDLE] ---------->Activate IP_MODE_AUTO

[NETWORK_MIDDLE] NetworkDHCPMonitor::SetDHCP Wired[eth0]
[NETWORK_SUBSYS] [LoadWirelessStaModule, 2712] insmod rt3572sta.ko ...
[NETWORK_MIDDLE] ####### WiredConnection::Activate  Success[ 1 ] #######

[NETWORK_MIDDLE]  NetworkManager::AddConnection [Finished]
[NETWORK_MIDDLE] NetworkEventManager::GetInstance()
[NETWORK_MIDDLE] Already created...
[NETWORK_MIDDLE] NetworkEventManager::t_OnEvent()
[NETWORK_MIDDLE] [NetworkEventManager::t_OnEvent()] NetworkCommon::EVENT_NET_WIRELESS_MODULE_INSMOD_COMPLETE
[AP_FRONTRUNNER/Fatal] 62 : [t_OnEvent][line:236] Wireless Module Loaded...

		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
		 Player Recieve Event:[5326] !!!
[DevMgr/Fatal] 63 : [t_OnEvent:304] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
[AP_FRONTRUNNER/Fatal] 64 : [t_OnEvent][line:248] StartMonitoring Done...

        ++++++++ [CCPTvUtil:GetModelCode:24] ModelCode:TV-32C650
[dlna at 1] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this
	usbcore found...
	ehci_hcd found...
	ohci_hcd found...
	usb_storage found...
[DevMgr/Fatal] 65 : [t_OnEvent:268] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE : (15)
[DevMgr/Fatal] 66 : [t_Main:450] All devices are initiated!!!
[DEFAULT/Debugging] 67 : [pTpcWindow->SetResolution] [0][51] Start
TDResolution_k : [19]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
#TDResolution_k : [19]
#TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
 m_stFRC200PanelResInfo.eRes [19]
 m_stFRC200PanelResInfo.tSetResInfo.vFreq [60000]
[STEP1]TDsFRC200Panel::SetResolutionInfo
[STEP3]TDsFRC200Panel::SetResolutionInfo
[STEP4]TDsFRC200Panel::SetResolutionInfo
 [FRC200] _60Hz #####
--> Same 60hz setting, Pass~! #####
[STEP5]TDsFRC200Panel::SetResolutionInfo

	>>[ERR:TDsFRCQPanel.cpp] SetFactoryItem():394 Not support FactoryItem uid =[320] [3D TEMPERATURE]


	>>[ERR:TDsFRCSPanel.cpp] SetFactoryItem():481 Not support FactoryItem uid =[320] [3D TEMPERATURE]


	>>[ERR:TDsFRC200Panel.cpp] SetFactoryItem():437 Not support FactoryItem uid =[320] [3D TEMPERATURE]

[DEFAULT/Debugging] 68 : [0]Window SetResolution returned 1
[DEFAULT/Debugging] 69 : [pTpcWindow->SetResolution] [0][51] Start
TDResolution_k : [19]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [10], [0], [257]
[DEFAULT/Debugging] 70 : [3]Window SetResolution returned 1
[DEV_ERROR  ] [GetPartitionSize] invalid path : NONE