Guest User

3.0 KFire last_kmsg

a guest
Apr 11th, 2012
118
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.78 KB | None | 0 0
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 2.6.35.7+ (ubuntu@ip-10-170-73-78) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT Wed Nov 23 03:44:46 UTC 2011
  3. [ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c53c7f
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. [ 0.000000] Machine: OMAP4430
  6. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  7. [ 0.000000] ***********************
  8. [ 0.000000] OMAP4430 ES2.3 type(GP)
  9. [ 0.000000] id-code (6b95c02f)
  10. [ 0.000000] Die-id (050A0006-00000001-014691B7-0E017011)
  11. [ 0.000000] Prod-id (000DB95C-000600F0)
  12. [ 0.000000] Reset Reason(0x00000002)
  13. [ 0.000000] ***********************
  14. [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000
  15. [ 0.000000] FIXME: omap44xx_sram_init not implemented
  16. [ 0.000000] Reserving 5242880 bytes SDRAM for VRAM
  17. [ 0.000000] SMC: Allocated workspace of 3M at (0x9c900000)
  18. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c171f000 s5696 r8192 d22976 u65536
  19. [ 0.000000] pcpu-alloc: s5696 r8192 d22976 u65536 alloc=16*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117602
  22. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=463M@0x80000000 init=/init vram=5M omapfb.vram=0:5M
  23. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  26. [ 0.000000] Memory: 463MB = 463MB total
  27. [ 0.000000] Memory: 454792k/454792k available, 19320k reserved, 0K highmem
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  31. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  32. [ 0.000000] vmalloc : 0xdd000000 - 0xf8000000 ( 432 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xdcf00000 ( 463 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .init : 0xc0008000 - 0xc0044000 ( 240 kB)
  37. [ 0.000000] .text : 0xc0044000 - 0xc061a000 (5976 kB)
  38. [ 0.000000] .data : 0xc061a000 - 0xc0669880 ( 319 kB)
  39. [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  40. [ 0.000000] Hierarchical RCU implementation.
  41. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  42. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  43. [ 0.000000] NR_IRQS:388
  44. [ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
  45. [ 0.000000] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  46. [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  47. [ 0.000000] omap_hwmod: dmic: resetting
  48. [ 0.000000] omap_hwmod: dss_dsi1: cannot be enabled (3)
  49. [ 0.000000] omap_hwmod: dss_dsi2: cannot be enabled (3)
  50. [ 0.000000] omap_hwmod: dss_hdmi: cannot be enabled (3)
  51. [ 0.000000] omap_hwmod: dss_rfbi: cannot be enabled (3)
  52. [ 0.000000] omap_hwmod: dss_venc: cannot be enabled (3)
  53. [ 0.000000] omap_hwmod: iva: failed to reset in 10000 usec
  54. [ 0.000000] omap_hwmod: mailbox: resetting
  55. [ 0.000000] omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
  56. [ 0.000000] omap_hwmod: mcspi1: resetting
  57. [ 0.000000] omap_hwmod: mcspi2: resetting
  58. [ 0.000000] omap_hwmod: mcspi3: resetting
  59. [ 0.000000] omap_hwmod: mcspi4: resetting
  60. [ 0.000000] omap_hwmod: mmc1: resetting
  61. [ 0.000000] omap_hwmod: mmc2: resetting
  62. [ 0.000000] omap_hwmod: mmc3: resetting
  63. [ 0.000000] omap_hwmod: mmc4: resetting
  64. [ 0.000000] omap_hwmod: mmc5: resetting
  65. [ 0.000000] omap_hwmod: timer3: resetting
  66. [ 0.000000] omap_hwmod: timer4: resetting
  67. [ 0.000000] omap_hwmod: timer5: resetting
  68. [ 0.000000] omap_hwmod: timer6: resetting
  69. [ 0.000000] omap_hwmod: timer7: resetting
  70. [ 0.000000] omap_hwmod: timer8: resetting
  71. [ 0.000000] omap_hwmod: timer9: resetting
  72. [ 0.000000] omap_hwmod: timer11: resetting
  73. [ 0.000000] GPMC revision 6.0
  74. [ 0.000000] SmartReflex CLASS3 initialized
  75. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  76. [ 0.000000] Console: colour dummy device 80x30
  77. [ 0.000000] Calibrating delay loop... 2013.49 BogoMIPS (lpj=7864320)
  78. [ 0.000000] pid_max: default: 32768 minimum: 301
  79. [ 0.000000] register_shrinker: no shrinker name registered for c0642e48
  80. [ 0.000000] register_shrinker: registering shrinker from fs/inode.c
  81. [ 0.000000] Mount-cache hash table entries: 512
  82. [ 0.000000] Initializing cgroup subsys debug
  83. [ 0.000000] Initializing cgroup subsys cpuacct
  84. [ 0.000000] Initializing cgroup subsys freezer
  85. [ 0.000000] CPU: Testing write buffer coherency: ok
  86. [ 0.000000] Calibrating local timer...
  87. [ 0.000000] 50.00MHz.
  88. [ 0.000000] L310 cache controller enabled
  89. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x1e470000
  90. [ 0.000000] CPU1: Booted secondary processor
  91. [ 0.000000] Brought up 2 CPUs
  92. [ 0.000000] SMP: Total of 2 processors activated (4010.18 BogoMIPS).
  93. [ 0.000000] devtmpfs: initialized
  94. [ 0.000000] regulator: core version 0.5
  95. [ 0.000000] NET: Registered protocol family 16
  96. [ 0.000000] EMIF0 is enabled with IRQ142
  97. [ 0.000000] EMIF1 is enabled with IRQ143
  98. [ 0.000000] OMAP GPIO hardware version 0.1
  99. [ 0.000000] omap_mux_init: Add partition: #1: core, flags: 2
  100. [ 0.000000] omap_mux_init: Add partition: #2: wkup, flags: 2
  101. [ 0.000000] Reprogramming LPDDR2 timingsto 400000000 Hz
  102. [ 0.000000] _omap_mux_init_signal: Could not set signal fref_clk0_out.gpio_wk6
  103. [ 0.000000] ram_console: got buffer at 8e000000, size 40000
  104. [ 0.000000] ram_console: found existing buffer, size 43639, start 43639
  105. [ 0.000000] console [ram-1] enabled
  106.  
  107.  
  108. U-Boot 1.1.4 (Mar 10 2012 - 17:59:50)
  109.  
  110. Load address: 0x80e80000
  111. Board Rev.: 6
  112. DRAM: 512 MB
  113. Flash: 0 kB
  114. <idme> write 3 to offset 0x1020
  115. Using default environment
  116.  
  117. timed out in wait_for_pin: I2C_STAT=0
  118. I2C read: I/O error
  119. In: serial
  120. Out: serial
  121. Err: serial
  122. PMIC TWL 6030 start conditions
  123. PHOENIX_START_CONDITION :0x00
  124. PHOENIX_LAST_TURNOFF_STS :0x01
  125. PHOENIX_STS_HW_CONDITIONS:0x2b
  126. OMAP4 PRM_RSTST :0x00000002
  127. Panel of LG
  128.  
  129. efi partition table:
  130. 256 128K xloader
  131. 512 256K bootloader
  132. 1024 10M dkernel
  133. 21504 192M dfs
  134. 414720 16M recovery
  135. 447488 64M backup
  136. 578560 10M boot
  137. 599040 5M splash
  138. 609280 512M system
  139. 1657856 1137M userdata
  140. 3986432 256M cache
  141. 4510720 5131M media
  142. Fastboot entered...
  143. Read bootmode from the eMMC
  144. bootmode = '0x0000000000004000'
  145. Entering into recovery mode !!!
  146. Hit ESC key to stop autoboot: 1  0 kernel @ 80008000 (3119048)
  147. ramdisk @ 81000000 (2200154)
  148. I2C read: I/O error
  149. Blaze/SDP Board.
  150.  
  151. Starting kernel ...
  152.  
  153. [ 0.000000] _omap_mux_init_gpio: Could not set gpio4
  154. [ 0.000000] _omap_mux_init_signal: Could not set signal fref_clk4_req.gpio_wk7
  155. [ 0.000000] _omap_mux_init_signal: Could not set signal c2c_data12.gpio_101
  156. [ 0.000000] _omap_mux_init_signal: Could not set signal c2c_data12.gpio_101
  157. [ 0.000000] res->start = 49022000
  158. [ 0.000000] res->start = 49024000
  159. [ 0.000000] res->start = 49026000
  160. [ 0.000000] res->start = 48096000
  161. [ 0.000000] OMAP DMA hardware revision 0.0
  162. [ 0.000000] dma dma.0: System DMA registered
  163. [ 0.000640] HSI: device registered as omap_hwmod: hsi
  164. [ 0.013183] bio: create slab <bio-0> at 0
  165. [ 0.015808] usbcore: registered new interface driver usbfs
  166. [ 0.016021] usbcore: registered new interface driver hub
  167. [ 0.016143] usbcore: registered new device driver usb
  168. [ 0.016601] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
  169. [ 0.017303] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  170. [ 0.017822] twl6030: PIH (irq 39) chaining IRQs 368..387
  171. [ 0.018035] TWL6030: Start condition(PHOENIX_START_CONDITION) is 0x00
  172. [ 0.018218] TWL6030: Last turn off status (PHOENIX_LAST_TURN_OFF_STATUS) is 0x01
  173. [ 0.018371] TWL6030: Hardware Conditions (PHOENIX_STS_HW_CONDITIONS) is 0x23
  174. [ 0.026702] regulator: VMMC: 1200 <--> 3000 mV at 1800 mV normal standby
  175. [ 0.027282] regulator: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  176. [ 0.027832] regulator: VUSIM: 1200 <--> 3000 mV at 3000 mV normal standby
  177. [ 0.028533] regulator: VANA: 2100 mV normal standby
  178. [ 0.029907] twl6030_enable: VCXIO state=0x55
  179. [ 0.029907] regulator: VCXIO: 1800 mV normal standby
  180. [ 0.030853] twl6030_enable: VDAC state=0x55
  181. [ 0.030853] regulator: VDAC: 1800 mV normal standby
  182. [ 0.031372] regulator: VUSB: 3300 mV normal standby
  183. [ 0.032196] twl6030_enable: VAUX1_6030 state=0x55
  184. [ 0.032348] regulator: VAUX1_6030: 1000 <--> 3200 mV at 2800 mV normal standby
  185. [ 0.033142] twl6030_enable: VAUX2_6030 state=0x55
  186. [ 0.033294] regulator: VAUX2_6030: 1200 <--> 3200 mV at 1800 mV normal standby
  187. [ 0.034088] regulator: VAUX3_6030: 1000 <--> 3200 mV at 1200 mV normal standby
  188. [ 0.034240] twl6030_usb_probe mbid=6
  189. [ 0.034271] regulator_check_voltage: operation not allowed for VUSB
  190. [ 0.035034] !!!!!BBSPOR_CFG = 72
  191. [ 0.035156] !!!!!BBSPOR_CFG = 72
  192. [ 0.035614] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  193. [ 0.035736] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  194. [ 0.036041] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
  195. [ 0.036254] i2c_omap i2c_omap.4: bus 4 rev4.0 at 400 kHz
  196. [ 0.037475] bq27541 Driver
  197. [ 0.037536] bq27541_probe
  198. [ 0.049865] create_bq_procfs
  199. [ 0.050018] Summit SMB347 Driver
  200. [ 0.050079] summit_probe
  201. [ 0.050109] Board id=6
  202. [ 0.050292] Summit SMB347 detected, chip_id=0x6 board id=6
  203. [ 0.050537] create_summit_procfs
  204. [ 0.055389] omap4430_sdp_display_probe:Enter
  205. [ 0.055511] Registered led device: led-orange
  206. [ 0.055999] omap4430_sdp_display_probe:Exit
  207. [ 0.056152] omap4430_keypad_led_probe:Enter
  208. [ 0.056274] Registered led device: led-green
  209. [ 0.056762] omap4430_keypad_led_probe:Exit
  210. [ 0.057098] Advanced Linux Sound Architecture Driver Version 1.0.23.
  211. [ 0.057586] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
  212. [ 0.057830] Switching to clocksource timer-32k
  213. [ 0.068420] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
  214. [ 0.068572] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  215. [ 0.068603] musb_hdrc: MHDRC RTL version 2.0
  216. [ 0.068603] musb_hdrc: setup fifo_mode 4
  217. [ 0.068634] musb_hdrc: 28/31 max ep, 16384/16384 memory
  218. [ 0.068725] musb_hdrc musb_hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124
  219. [ 0.068969] NET: Registered protocol family 2
  220. [ 0.069061] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  221. [ 0.069274] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  222. [ 0.069549] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  223. [ 0.069824] TCP: Hash tables configured (established 16384 bind 16384)
  224. [ 0.069854] TCP reno registered
  225. [ 0.069854] UDP hash table entries: 256 (order: 1, 8192 bytes)
  226. [ 0.069885] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  227. [ 0.070037] NET: Registered protocol family 1
  228. [ 0.083343] RPC: Registered udp transport module.
  229. [ 0.083343] RPC: Registered tcp transport module.
  230. [ 0.083374] RPC: Registered tcp NFSv4.1 backchannel transport module.
  231. [ 0.083374] register_shrinker: no shrinker name registered for c0668418
  232. [ 0.083526] Trying to unpack rootfs image as initramfs...
  233. [ 0.191314] Freeing initrd memory: 2148K
  234. [ 0.194671] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
  235. [ 0.194671] ipu-power initialized ipu, major: 251, minor: 0
  236. [ 0.194946] sdp4430_wifi_init: start
  237. [ 0.195220] omap-iommu omap-iommu.0: ducati registered
  238. [ 0.195251] omap-iommu omap-iommu.1: tesla registered
  239. [ 0.195739] iovmm-omap initialized ducati, major: 250, base-minor: 0
  240. [ 0.195892] iovmm-omap initialized tesla, major: 250, base-minor: 1
  241. [ 0.196563] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
  242. [ 0.196746] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 249, base-minor: 0
  243. [ 0.196746] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
  244. [ 0.196899] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 249, base-minor: 1
  245. [ 0.196929] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
  246. [ 0.197082] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 249, base-minor: 2
  247. [ 0.206695] register_shrinker: registering shrinker from mm/ashmem.c
  248. [ 0.206695] ashmem: initialized
  249. [ 0.214233] VFS: Disk quotas dquot_6.5.2
  250. [ 0.214477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  251. [ 0.214477] register_shrinker: no shrinker name registered for c0643330
  252. [ 0.217346] register_shrinker: no shrinker name registered for c0643ecc
  253. [ 0.217376] msgmni has been set to 892
  254. [ 0.217407] SMC: Running on a GP device, SMC disabled
  255. [ 0.219085] alg: No test for stdrng (krng)
  256. [ 0.219116] io scheduler noop registered
  257. [ 0.219146] io scheduler deadline registered
  258. [ 0.219238] io scheduler cfq registered (default)
  259. [ 0.276672] OMAP DSS rev 4.0
  260. [ 0.276947] OMAP DISPC rev 4.0
  261. [ 0.277252] OMAP DSI rev 3.0
  262. [ 0.277557] OMAP DSI2 rev 3.0
  263. [ 0.278350] Otter1 LCD probe called
  264. [ 0.286743] omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not found
  265. [ 0.286987] omap_smartreflex_enable: omap_sr struct for sr_core not found
  266. [ 0.287628] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  267. [ 0.287872] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  268. [ 0.288085] omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  269. [ 0.000000] Initializing cgroup subsys cpu
  270. [ 0.000000] Linux version 2.6.35.7+ (ubuntu@ip-10-170-73-78) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT Wed Nov 23 03:44:46 UTC 2011
  271. [ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c53c7f
  272. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  273. [ 0.000000] Machine: OMAP4430
  274. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  275. [ 0.000000] On node 0 totalpages: 118528
  276. [ 0.000000] free_area_init_node: node 0, pgdat c0668de0, node_mem_map c076d000
  277. [ 0.000000] Normal zone: 926 pages used for memmap
  278. [ 0.000000] Normal zone: 0 pages reserved
  279. [ 0.000000] Normal zone: 117602 pages, LIFO batch:31
  280. [ 0.000000] ***********************
  281. [ 0.000000] OMAP4430 ES2.3 type(GP)
  282. [ 0.000000] id-code (6b95c02f)
  283. [ 0.000000] Die-id (050A0006-00000001-014691B7-0E017011)
  284. [ 0.000000] Prod-id (000DB95C-000600F0)
  285. [ 0.000000] Reset Reason(0x00000002)
  286. [ 0.000000] ***********************
  287. [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000
  288. [ 0.000000] FIXME: omap44xx_sram_init not implemented
  289. [ 0.000000] Reserving 5242880 bytes SDRAM for VRAM
  290. [ 0.000000] SMC: Allocated workspace of 3M at (0x9c900000)
  291. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c171f000 s5696 r8192 d22976 u65536
  292. [ 0.000000] pcpu-alloc: s5696 r8192 d22976 u65536 alloc=16*4096
  293. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  294. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 117602
  295. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=463M@0x80000000 init=/init vram=5M omapfb.vram=0:5M
  296. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  297. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  298. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  299. [ 0.000000] Memory: 463MB = 463MB total
  300. [ 0.000000] Memory: 454792k/454792k available, 19320k reserved, 0K highmem
  301. [ 0.000000] Virtual kernel memory layout:
  302. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  303. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  304. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  305. [ 0.000000] vmalloc : 0xdd000000 - 0xf8000000 ( 432 MB)
  306. [ 0.000000] lowmem : 0xc0000000 - 0xdcf00000 ( 463 MB)
  307. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  308. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  309. [ 0.000000] .init : 0xc0008000 - 0xc0044000 ( 240 kB)
  310. [ 0.000000] .text : 0xc0044000 - 0xc061a000 (5976 kB)
  311. [ 0.000000] .data : 0xc061a000 - 0xc0669880 ( 319 kB)
  312. [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  313. [ 0.000000] Hierarchical RCU implementation.
  314. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  315. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  316. [ 0.000000] NR_IRQS:388
  317. [ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
  318. [ 0.000000] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  319. [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  320. [ 0.000000] omap_hwmod: dmic: resetting
  321. [ 0.000000] omap_hwmod: dss_dsi1: cannot be enabled (3)
  322. [ 0.000000] omap_hwmod: dss_dsi2: cannot be enabled (3)
  323. [ 0.000000] omap_hwmod: dss_hdmi: cannot be enabled (3)
  324. [ 0.000000] omap_hwmod: dss_rfbi: cannot be enabled (3)
  325. [ 0.000000] omap_hwmod: dss_venc: cannot be enabled (3)
  326. [ 0.000000] omap_hwmod: iva: failed to reset in 10000 usec
  327. [ 0.000000] omap_hwmod: mailbox: resetting
  328. [ 0.000000] omap_hwmod: omap-mcpdm-dai: cannot be enabled (3)
  329. [ 0.000000] omap_hwmod: mcspi1: resetting
  330. [ 0.000000] omap_hwmod: mcspi2: resetting
  331. [ 0.000000] omap_hwmod: mcspi3: resetting
  332. [ 0.000000] omap_hwmod: mcspi4: resetting
  333. [ 0.000000] omap_hwmod: mmc1: resetting
  334. [ 0.000000] omap_hwmod: mmc2: resetting
  335. [ 0.000000] omap_hwmod: mmc3: resetting
  336. [ 0.000000] omap_hwmod: mmc4: resetting
  337. [ 0.000000] omap_hwmod: mmc5: resetting
  338. [ 0.000000] omap_hwmod: timer3: resetting
  339. [ 0.000000] omap_hwmod: timer4: resetting
  340. [ 0.000000] omap_hwmod: timer5: resetting
  341. [ 0.000000] omap_hwmod: timer6: resetting
  342. [ 0.000000] omap_hwmod: timer7: resetting
  343. [ 0.000000] omap_hwmod: timer8: resetting
  344. [ 0.000000] omap_hwmod: timer9: resetting
  345. [ 0.000000] omap_hwmod: timer11: resetting
  346. [ 0.000000] GPMC revision 6.0
  347. [ 0.000000] SmartReflex CLASS3 initialized
  348. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  349. [ 0.000000] Console: colour dummy device 80x30
  350. [ 0.000000] Calibrating delay loop... 2013.49 BogoMIPS (lpj=7864320)
  351. [ 0.000000] pid_max: default: 32768 minimum: 301
  352. [ 0.000000] register_shrinker: no shrinker name registered for c0642e48
  353. [ 0.000000] register_shrinker: registering shrinker from fs/inode.c
  354. [ 0.000000] Mount-cache hash table entries: 512
  355. [ 0.000000] Initializing cgroup subsys debug
  356. [ 0.000000] Initializing cgroup subsys cpuacct
  357. [ 0.000000] Initializing cgroup subsys freezer
  358. [ 0.000000] CPU: Testing write buffer coherency: ok
  359. [ 0.000000] Calibrating local timer...
  360. [ 0.000000] 50.00MHz.
  361. [ 0.000000] L310 cache controller enabled
  362. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x1e470000
  363. [ 0.000000] CPU1: Booted secondary processor
  364. [ 0.000000] Brought up 2 CPUs
  365. [ 0.000000] SMP: Total of 2 processors activated (4010.18 BogoMIPS).
  366. [ 0.000000] devtmpfs: initialized
  367. [ 0.000000] regulator: core version 0.5
  368. [ 0.000000] NET: Registered protocol family 16
  369. [ 0.000000] EMIF0 is enabled with IRQ142
  370. [ 0.000000] EMIF1 is enabled with IRQ143
  371. [ 0.000000] OMAP GPIO hardware version 0.1
  372. [ 0.000000] omap_mux_init: Add partition: #1: core, flags: 2
  373. [ 0.000000] omap_mux_init: Add partition: #2: wkup, flags: 2
  374. [ 0.000000] Reprogramming LPDDR2 timingsto 400000000 Hz
  375. [ 0.000000] _omap_mux_init_signal: Could not set signal fref_clk0_out.gpio_wk6
  376. [ 0.000000] ram_console: got buffer at 8e000000, size 40000
  377. [ 0.000000] ram_console: found existing buffer, size 43639, start 43639
  378. [ 0.000000] console [ram-1] enabled
  379. [ 0.000000] _omap_mux_init_gpio: Could not set gpio4
  380. [ 0.000000] _omap_mux_init_signal: Could not set signal fref_clk4_req.gpio_wk7
  381. [ 0.000000] _omap_mux_init_signal: Could not set signal c2c_data12.gpio_101
  382. [ 0.000000] _omap_mux_init_signal: Could not set signal c2c_data12.gpio_101
  383. [ 0.000000] res->start = 49022000
  384. [ 0.000000] res->start = 49024000
  385. [ 0.000000] res->start = 49026000
  386. [ 0.000000] res->start = 48096000
  387. [ 0.000000] OMAP DMA hardware revision 0.0
  388. [ 0.000000] dma dma.0: System DMA registered
  389. [ 0.000640] HSI: device registered as omap_hwmod: hsi
  390. [ 0.013183] bio: create slab <bio-0> at 0
  391. [ 0.015808] usbcore: registered new interface driver usbfs
  392. [ 0.016021] usbcore: registered new interface driver hub
  393. [ 0.016143] usbcore: registered new device driver usb
  394. [ 0.016601] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
  395. [ 0.017303] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  396. [ 0.017822] twl6030: PIH (irq 39) chaining IRQs 368..387
  397. [ 0.018035] TWL6030: Start condition(PHOENIX_START_CONDITION) is 0x00
  398. [ 0.018218] TWL6030: Last turn off status (PHOENIX_LAST_TURN_OFF_STATUS) is 0x01
  399. [ 0.018371] TWL6030: Hardware Conditions (PHOENIX_STS_HW_CONDITIONS) is 0x23
  400. [ 0.026702] regulator: VMMC: 1200 <--> 3000 mV at 1800 mV normal standby
  401. [ 0.027282] regulator: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  402. [ 0.027832] regulator: VUSIM: 1200 <--> 3000 mV at 3000 mV normal standby
  403. [ 0.028533] regulator: VANA: 2100 mV normal standby
  404. [ 0.029907] twl6030_enable: VCXIO state=0x55
  405. [ 0.029907] regulator: VCXIO: 1800 mV normal standby
  406. [ 0.030853] twl6030_enable: VDAC state=0x55
  407. [ 0.030853] regulator: VDAC: 1800 mV normal standby
  408. [ 0.031372] regulator: VUSB: 3300 mV normal standby
  409. [ 0.032196] twl6030_enable: VAUX1_6030 state=0x55
  410. [ 0.032348] regulator: VAUX1_6030: 1000 <--> 3200 mV at 2800 mV normal standby
  411. [ 0.033142] twl6030_enable: VAUX2_6030 state=0x55
  412. [ 0.033294] regulator: VAUX2_6030: 1200 <--> 3200 mV at 1800 mV normal standby
  413. [ 0.034088] regulator: VAUX3_6030: 1000 <--> 3200 mV at 1200 mV normal standby
  414. [ 0.034240] twl6030_usb_probe mbid=6
  415. [ 0.034271] regulator_check_voltage: operation not allowed for VUSB
  416. [ 0.035034] !!!!!BBSPOR_CFG = 72
  417. [ 0.035156] !!!!!BBSPOR_CFG = 72
  418. [ 0.035614] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  419. [ 0.035736] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
  420. [ 0.036041] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
  421. [ 0.036254] i2c_omap i2c_omap.4: bus 4 rev4.0 at 400 kHz
  422. [ 0.037475] bq27541 Driver
  423. [ 0.037536] bq27541_probe
  424. [ 0.049865] create_bq_procfs
  425. [ 0.050018] Summit SMB347 Driver
  426. [ 0.050079] summit_probe
  427. [ 0.050109] Board id=6
  428. [ 0.050292] Summit SMB347 detected, chip_id=0x6 board id=6
  429. [ 0.050537] create_summit_procfs
  430. [ 0.055389] omap4430_sdp_display_probe:Enter
  431. [ 0.055511] Registered led device: led-orange
  432. [ 0.055999] omap4430_sdp_display_probe:Exit
  433. [ 0.056152] omap4430_keypad_led_probe:Enter
  434. [ 0.056274] Registered led device: led-green
  435. [ 0.056762] omap4430_keypad_led_probe:Exit
  436. [ 0.057098] Advanced Linux Sound Architecture Driver Version 1.0.23.
  437. [ 0.057586] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
  438. [ 0.057830] Switching to clocksource timer-32k
  439. [ 0.068420] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
  440. [ 0.068572] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  441. [ 0.068603] musb_hdrc: MHDRC RTL version 2.0
  442. [ 0.068603] musb_hdrc: setup fifo_mode 4
  443. [ 0.068634] musb_hdrc: 28/31 max ep, 16384/16384 memory
  444. [ 0.068725] musb_hdrc musb_hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124
  445. [ 0.068969] NET: Registered protocol family 2
  446. [ 0.069061] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  447. [ 0.069274] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  448. [ 0.069549] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  449. [ 0.069824] TCP: Hash tables configured (established 16384 bind 16384)
  450. [ 0.069854] TCP reno registered
  451. [ 0.069854] UDP hash table entries: 256 (order: 1, 8192 bytes)
  452. [ 0.069885] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  453. [ 0.070037] NET: Registered protocol family 1
  454. [ 0.083343] RPC: Registered udp transport module.
  455. [ 0.083343] RPC: Registered tcp transport module.
  456. [ 0.083374] RPC: Registered tcp NFSv4.1 backchannel transport module.
  457. [ 0.083374] register_shrinker: no shrinker name registered for c0668418
  458. [ 0.083526] Trying to unpack rootfs image as initramfs...
  459. [ 0.191314] Freeing initrd memory: 2148K
  460. [ 0.194671] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
  461. [ 0.194671] ipu-power initialized ipu, major: 251, minor: 0
  462. [ 0.194946] sdp4430_wifi_init: start
  463. [ 0.195220] omap-iommu omap-iommu.0: ducati registered
  464. [ 0.195251] omap-iommu omap-iommu.1: tesla registered
  465. [ 0.195739] iovmm-omap initialized ducati, major: 250, base-minor: 0
  466. [ 0.195892] iovmm-omap initialized tesla, major: 250, base-minor: 1
  467. [ 0.196563] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
  468. [ 0.196746] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 249, base-minor: 0
  469. [ 0.196746] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
  470. [ 0.196899] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 249, base-minor: 1
  471. [ 0.196929] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
  472. [ 0.197082] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 249, base-minor: 2
  473. [ 0.206695] register_shrinker: registering shrinker from mm/ashmem.c
  474. [ 0.206695] ashmem: initialized
  475. [ 0.214233] VFS: Disk quotas dquot_6.5.2
  476. [ 0.214477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  477. [ 0.214477] register_shrinker: no shrinker name registered for c0643330
  478. [ 0.217346] register_shrinker: no shrinker name registered for c0643ecc
  479. [ 0.217376] msgmni has been set to 892
  480. [ 0.217407] SMC: Running on a GP device, SMC disabled
  481. [ 0.219085] alg: No test for stdrng (krng)
  482. [ 0.219116] io scheduler noop registered
  483. [ 0.219146] io scheduler deadline registered
  484. [ 0.219238] io scheduler cfq registered (default)
  485. [ 0.276672] OMAP DSS rev 4.0
  486. [ 0.276947] OMAP DISPC rev 4.0
  487. [ 0.277252] OMAP DSI rev 3.0
  488. [ 0.277557] OMAP DSI2 rev 3.0
  489. [ 0.278350] Otter1 LCD probe called
  490. [ 0.286743] omap_smartreflex_disable_reset_volt: omap_sr struct for sr_core not found
  491. [ 0.286987] omap_smartreflex_enable: omap_sr struct for sr_core not found
  492. [ 0.287628] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  493. [ 0.287872] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  494. [ 0.288085] omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  495. [ 1.522521] console [ttyO2] enabled
  496. [ 1.526428] omap-hsuart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  497. [ 1.527343] bq27541 1-0055: termperature=269
  498. [ 1.527343] summit_bat_notifier_call val=47
  499. [ 1.549713] brd: module loaded
  500. [ 1.555999] loop: module loaded
  501. [ 1.560333] Bosch Sensortec Device detected!
  502. [ 1.560333] BMA250 registered I2C driver!
  503. [ 1.570068] input: bma250 as /devices/virtual/input/input0
  504. [ 1.576354] android init
  505. [ 1.579071] android_probe pdata: c063df00
  506. [ 1.583435] android_bind
  507. [ 1.586090] android_bind_config
  508. [ 1.589721] android_usb gadget: android_usb ready
  509. [ 1.596130] f_adb init
  510. [ 1.598632] android_register_function adb
  511. [ 1.602844] f_mass_storage init
  512. [ 1.606201] fsg_probe pdev: c063dc48, pdata: c063def0
  513. [ 1.611633] android_register_function usb_mass_storage
  514. [ 1.617034] f_rndis init
  515. [ 1.619842] android_register_function rndis
  516. [ 1.624237] rndis_function_bind_config MAC: 02:01:35:36:41:30
  517. [ 1.630310] android_usb gadget: using Quanta defined ethernet address
  518. [ 1.637084] < Quanta_diagnostic > gpio_171 = 1 gpio_172 = 1 val = 3
  519. [ 1.643920] < Quanta Diagnostic > set dev_addr done !
  520. [ 1.649322] android_usb gadget: using random host ethernet address
  521. [ 1.669464] usb0: MAC 00:02:00:00:00:09
  522. [ 1.673461] usb0: HOST MAC a2:29:2a:a6:7f:34
  523. [ 1.678344] android_usb gadget: Mass Storage Function, version: 2009/09/11
  524. [ 1.685577] android_usb gadget: Number of LUNs=1
  525. [ 1.690399] lun0: LUN: removable file: (no medium)
  526. [ 1.695678] adb_bind_config
  527. [ 1.699493] ilitek_init
  528. [ 1.702850] twl6030_enable: VAUX3_6030 state=0x55
  529. [ 1.747375] ilitek_i2c_probe, i2c new style format
  530. [ 1.752380] ilitek_i2c_probe, IRQ: 0xC3
  531. [ 1.756500] ilitek_i2c_register_device, add i2c device, success
  532. [ 1.762695] ilitek_i2c_register_device, client.addr: 0x41
  533. [ 1.768371] ilitek_i2c_register_device, client.adapter: 0xDC839848
  534. [ 1.774841] ilitek_i2c_register_device, client.driver: 0xC06571CC
  535. [ 1.802246] ilitek_i2c_read_tp_info, firmware version 10.2.4.0
  536. [ 1.829315] summit_smb347 4-0006: summit_fsm_stateTransform:state : suspend(0) -> suspend(0) ; event : EVENT_TEMP_PROTECT_STEP_6
  537. [ 1.849060] ilitek_i2c_read_tp_info, protocol version: 1.2
  538. [ 1.880401] ilitek_i2c_read_tp_info, max_x: 3968, max_y: 2304, ch_x: 30, ch_y: 18
  539. [ 1.888244] ilitek_i2c_read_tp_info, max_tp: 2, max_btn: 0
  540. [ 1.894195] input: ilitek_i2c as /devices/platform/i2c_omap.2/i2c-2/2-0041/input/input1
  541. [ 1.902801] ilitek_i2c_register_device, register input device, success
  542. [ 1.909912] ilitek_i2c_register_device, request irq, success
  543. [ 1.915863] ilitek_init, register chrdev(246, 0)
  544. [ 1.927062] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
  545. [ 1.939270] using rtc device, twl_rtc, for alarms
  546. [ 1.944061] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  547. [ 1.952301] i2c /dev entries driver
  548. [ 1.964965] Linux video capture interface: v2.00
  549. [ 1.973632] lm75 4-0048: hwmon0 driver: Found sensor 'tmp105'
  550. [ 1.981445] OMAP Watchdog Timer Rev 0x00: initial timeout 240 sec
  551. [ 1.988952] device-mapper: uevent: version 1.0.3
  552. [ 1.997375] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
  553. [ 2.036407] cpuidle: using governor ladder
  554. [ 2.040710] cpuidle: using governor menu
  555. [ 2.045410] mmci-omap-hs: probe of mmci-omap-hs.0 failed with error -16
  556. [ 2.053039] omap_pwm_led omap_pwm_led: OMAP PWM LED (backlight) at GP timer 10/0
  557. [ 2.060974] Registered led device: backlight
  558. [ 2.066650] usbcore: registered new interface driver usbhid
  559. [ 2.072479] usbhid: USB HID core driver
  560. [ 2.077178] logger: created 64K log 'log_main'
  561. [ 2.082000] logger: created 256K log 'log_events'
  562. [ 2.087066] logger: created 128K log 'log_radio'
  563. [ 2.092071] logger: created 64K log 'log_system'
  564. [ 2.097076] logger: created 128K log 'log_metrics'
  565. [ 2.102264] logger: created 64K log 'log_amazon_main'
  566. [ 2.107849] register_shrinker: registering shrinker from drivers/staging/android/lowmemorykiller.c
  567. [ 2.122100] OMAP4 reset reason is 0x00000002
  568. [ 2.126770] TWL6030: Start condition(PHOENIX_START_CONDITION) is 0x00
  569. [ 2.138702] TWL6030: Last turn off status (PHOENIX_LAST_TURN_OFF_STATUS) is 0x01
  570. [ 2.156707] TWL6030: Hardware Conditions (PHOENIX_STS_HW_CONDITIONS) is 0x33
  571. [ 2.164154] HSI DRIVER Version 0.4.1
  572. [ 2.168121] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
  573. [ 2.179443] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
  574. [ 2.186004] omap_hsi omap_hsi.0: Trying to disable HSI IO wakeup on non HSI board
  575. [ 2.198883] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
  576. [ 2.220092] omap_hsi omap_hsi.0: Trying to enable HSI IO wakeup on non HSI board
  577. [ 2.246398] proc4430_drv_initializeModule
  578. [ 2.251312] omap-devicehandler omap-devicehandler.0: omap_devh_probe: adding devh Tesla
  579. [ 2.259918] omap-devh initialized Tesla, major: 240, base-minor: 0
  580. [ 2.266632] omap-devicehandler omap-devicehandler.1: omap_devh_probe: adding devh SysM3
  581. [ 2.275207] mmc0: new high speed DDR MMC card at address 0001
  582. [ 2.281311] omap-devh initialized SysM3, major: 240, base-minor: 1
  583. [ 2.288116] omap-devicehandler omap-devicehandler.2: omap_devh_probe: adding devh AppM3
  584. [ 2.296691] omap-devh initialized AppM3, major: 240, base-minor: 2
  585. [ 2.303405] mmcblk0: mmc0:0001 M8G2FA 7.20 GiB
  586. [ 2.303527] snd_soc_init invoked..
  587. [ 2.312042] mmcblk0:
  588. [ 2.314392] +snd_soc_register_codec tlv320aic3110-codec
  589. [ 2.320068] snd_soc_register_codec DRV c065e244
  590. [ 2.324829] snd_soc_register_codec. Configured DRv c065e244
  591. [ 2.330657] calling snd_soc_register_dais..
  592. [ 2.335052] snd_soc_register_dais tlv320aic3110-codec 1
  593. [ 2.340545] Registered DAI tlv320aic3110-MM_EXT
  594. [ 2.345275] Invoking snd_soc_instantiate_cards...
  595. [ 2.350219] -snd_soc_register_codec tlv320aic3110-codec
  596. [ 2.356018] snd_soc_register_dais omap-abe-dai 7
  597. [ 2.360870] Registered DAI MultiMedia1
  598. [ 2.364807] Registered DAI MultiMedia2
  599. [ 2.368743] Registered DAI Voice
  600. [ 2.372100] Registered DAI Tones
  601. [ 2.375488] Registered DAI Vibra
  602. [ 2.378875] Registered DAI MODEM
  603. [ 2.382263] Registered DAI MultiMedia1 LP
  604. [ 2.387817] Entered omap4_evt_soc_init>...
  605. [ 2.392120] OMAP4 EVT SoC init
  606. [ 2.395324] Found Board EVT 2.1 then we use ABE support
  607. [ 2.400970] Alternate GPT is invalid, using primary GPT.
  608. [ 2.406555] p1 (xloader) p2 (bootloader) p3 (dkernel) p4 (dfs) p5 (recovery) p6 (backup) p7 (boot) p8 (splash) p9 (system) p10 (userdata) p11 (cache) p12 (media)
  609. [ 2.423065] +snd_soc_register_card ...
  610. [ 2.427032] Card NumLinks 3
  611. [ 2.430023] DAI Create runtime tlv320aic3110 Media LP Dynamic 1
  612. [ 2.436248] DAI_link NullCodec Registration..
  613. [ 2.440795] +snd_soc_register_codec soc-audio
  614. [ 2.445373] snd_soc_register_codec DRV c0759e64
  615. [ 2.450103] snd_soc_register_codec. Configured DRv c0759e64
  616. [ 2.455963] calling snd_soc_register_dais..
  617. [ 2.460327] snd_soc_register_dais soc-audio 1
  618. [ 2.464904] Registered DAI null-codec-dai
  619. [ 2.469085] Invoking snd_soc_instantiate_cards...
  620. [ 2.474029] -snd_soc_register_codec null-codec
  621. [ 2.478668] DAI Create runtime tlv320aic3110 Media Dynamic 1
  622. [ 2.484619] DAI_link NullCodec Registration..
  623. [ 2.489166] +snd_soc_register_codec soc-audio
  624. [ 2.493713] snd_soc_register_codec DRV c0759e64
  625. [ 2.498474] snd_soc_register_codec. Configured DRv c0759e64
  626. [ 2.504302] calling snd_soc_register_dais..
  627. [ 2.508697] snd_soc_register_dais soc-audio 1
  628. [ 2.513275] Registered DAI null-codec-dai
  629. [ 2.517456] Invoking snd_soc_instantiate_cards...
  630. [ 2.522399] -snd_soc_register_codec null-codec
  631. [ 2.527038] DAI Create runtime (Backend) FM-EXT Dynamic 0
  632. [ 2.532714] Invoking the snd_soc_instantiate_cards..
  633. [ 2.537902] Entered snd_soc_instantiate_card
  634. [ 2.542358] Invoking soc_bind_dai_link 3 from instantiate_card
  635. [ 2.548492] soc_bind_dai_link tlv320aic3110 Media LP at idx 0
  636. [ 2.554534] codec->name null-codec dai name null-codec
  637. [ 2.559906] Found All 4 Client Drivers..
  638. [ 2.564025] Codec dcb7fe40 Codec_Dai dc35c1e0 Platform dc3a7e80 CPU_DAI dc303ea0
  639. [ 2.571777] -soc_bind_dai_link RTD 1
  640. [ 2.575531] soc_bind_dai_link tlv320aic3110 Media at idx 1
  641. [ 2.581268] codec->name null-codec dai name null-codec
  642. [ 2.586639] Found All 4 Client Drivers..
  643. [ 2.590759] Codec dcb7fe40 Codec_Dai dc35c1e0 Platform dc3a7400 CPU_DAI dc883180
  644. [ 2.598510] -soc_bind_dai_link RTD 2
  645. [ 2.602264] soc_bind_dai_link (Backend) FM-EXT at idx 2
  646. [ 2.607727] codec->name tlv320aic3110-codec dai name tlv320aic3110-codec
  647. [ 2.614776] Found All 4 Client Drivers..
  648. [ 2.618865] Codec dcb7fcc0 Codec_Dai dc94d960 Platform dc3a7e80 CPU_DAI dc98cc60
  649. [ 2.626617] -soc_bind_dai_link RTD 3
  650. [ 2.630371] Calling snd_card_create
  651. [ 2.634124] checking Card->probe 0
  652. [ 2.637695] Card NumLinks 3 Calling probe_dai_link
  653. [ 2.642730] soc_probe_dai_link OMAP4_KC1-ABE 0
  654. [ 2.647369] cpu_dai->probed flag 0
  655. [ 2.650939] codec->driver->probe 0
  656. [ 2.654541] platform driver probe 0
  657. [ 2.663177] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
  658. [ 2.669311] soc_probe_dai_link OMAP4_KC1-ABE 1
  659. [ 2.673950] cpu_dai->probed flag 0
  660. [ 2.677520] platform driver probe 0
  661. [ 2.681915] asoc: null-codec-dai <-> MultiMedia2 mapping ok
  662. [ 2.687774] soc_probe_dai_link OMAP4_KC1-ABE 2
  663. [ 2.692413] cpu_dai->probed flag 0
  664. [ 2.696258] invoking codec driver probe...
  665. [ 8.862243] coming out of codec->driver probe...
  666. [ 8.867095] codec->driver->probe c038a088
  667. [ 8.871337] platform driver probe 1
  668. [ 8.875000] entered the omap4_aic31xx_init function....
  669. [ 9.079742] asoc: tlv320aic3110-MM_EXT <-> omap-mcbsp-dai.2 mapping ok
  670. [ 9.087493] input: OMAP4_KC1-ABE Headset Jack as /devices/platform/soc-audio/sound/card0/input3
  671. [ 9.097473] -snd_soc_register_card OMAP4_KC1-ABE
  672. [ 9.102325] OMAP4 EVT Soc Init success..
  673. [ 9.106414] ALSA device list:
  674. [ 9.109558] #0: OMAP4_KC1_AIC3110-ABE
  675. [ 9.113983] Netfilter messages via NETLINK v0.30.
  676. [ 9.119018] nf_conntrack version 0.5.0 (7139 buckets, 28556 max)
  677. [ 9.125671] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  678. [ 9.133453] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  679. [ 9.141754] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  680. [ 9.148345] ctnetlink v0.93: registering with nfnetlink.
  681. [ 9.154266] xt_time: kernel timezone is -0000
  682. [ 9.158996] ip_tables: (C) 2000-2006 Netfilter Core Team
  683. [ 9.164703] arp_tables: (C) 2002 David S. Miller
  684. [ 9.169616] TCP cubic registered
  685. [ 9.173004] Initializing XFRM netlink socket
  686. [ 9.178466] NET: Registered protocol family 10
  687. [ 9.183624] lo: Disabled Privacy Extensions
  688. [ 9.188385] Mobile IPv6
  689. [ 9.190948] IPv6 over IPv4 tunneling driver
  690. [ 9.195892] sit0: Disabled Privacy Extensions
  691. [ 9.200958] ip6tnl0: Disabled Privacy Extensions
  692. [ 9.205841] NET: Registered protocol family 17
  693. [ 9.210540] NET: Registered protocol family 15
  694. [ 9.215240] ThumbEE CPU extension supported.
  695. [ 9.221069] omap_hwmod: Initialize debugfs support
  696. [ 9.227264] Power Management for TI OMAP4.
  697. [ 9.231933] prcm_clear_statdep_regs: Keep static depndencies
  698. [ 9.238128] CPUidle for CPU0 registered
  699. [ 9.242767] CPUidle for CPU1 registered
  700. [ 9.247314] sr_init: No PMIC hook to init smartreflex
  701. [ 9.253021] smartreflex smartreflex.0: omap_smartreflex_probe: SmartReflex driver initialized
  702. [ 9.262023] smartreflex smartreflex.1: omap_smartreflex_probe: SmartReflex driver initialized
  703. [ 9.270996] smartreflex smartreflex.2: omap_smartreflex_probe: SmartReflex driver initialized
  704. [ 9.284759] Disabling unused clock "usb_phy_cm_clk32k"
  705. [ 9.290313] Disabling unused clock "ocp2scp_usb_phy_ick"
  706. [ 9.295898] Disabling unused clock "ocp2scp_usb_phy_phy_48m"
  707. [ 9.301849] Disabling unused clock "hdq1w_fck"
  708. [ 9.306518] Disabling unused clock "gpmc_ick"
  709. [ 9.311096] Disabling unused clock "gpio4_dbclk"
  710. [ 9.316345] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  711. [ 9.443511] Console: switching to colour frame buffer device 128x37
  712. [ 9.462310] twl_rtc twl_rtc: setting system clock to 2012-04-12 01:13:58 UTC (1334193238)
  713. [ 9.471435] omap_vout omap_vout: : registered and initialized video device 0
  714. [ 9.479095] omap_vout omap_vout: : registered and initialized video device 1
  715. [ 9.486724] omap_vout omap_vout: : registered and initialized video device 2
  716. [ 9.494812] omap_wb: registered and initialized wb device 4 [v4l2]
  717. [ 9.501800] Freeing init memory: 240K
  718. [ 9.624267] init: Unable to open persistent property directory /data/property errno: 2
  719. [ 9.635437] enabling adb
  720. [ 9.638702] adb_open
  721. [ 10.142852] EXT4-fs (mmcblk0p11): recovery complete
  722. [ 10.151397] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts:
  723. [ 13.067321] Write Boot Partition 1
  724. [ 13.140716] bma250_shutdown
  725. [ 13.144409] summit_smb347 4-0006: summit_shutdown
  726. [ 13.149444] summit_smb347 4-0006: summit_fsm_stateTransform:state : suspend(0) -> shutdown(12) ; event : SHUTDOWN
  727. [ 13.161041] ilitek_i2c_shutdown
  728. [ 13.164703] bq27541 1-0055: bq27541_shutdown
  729. [ 13.169311] <dss_mgr_disable> disabling 2lcd
  730. [ 13.177215] mmci-omap-hs mmci-omap-hs.1: shutting down mmc
  731. [ 14.190826] Restarting system with command '0'.
  732. [ 14.195556] Device is rebooting thanks to Phonix...
Advertisement
Add Comment
Please, Sign In to add comment