API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 10th, 2014
148
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.58 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.8-1-ARCH] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Caviar Blue (SATA 6Gb/s)
  6. Device Model: WDC WD5000AAKX-001CA0
  7. Serial Number: WD-WCAYUFJ42450
  8. LU WWN Device Id: 5 0014ee 206680053
  9. Firmware Version: 15.01H15
  10. User Capacity: 500,107,862,016 bytes [500 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: ATA8-ACS (minor revision not indicated)
  14. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  15. Local Time is: Fri Apr 11 02:13:53 2014 MSK
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 8160) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 83) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 5) minutes.
  51. SCT capabilities: (0x3037) SCT Status supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 37
  59. 3 Spin_Up_Time 0x0027 141 140 021 Pre-fail Always - 3925
  60. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 685
  61. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  63. 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5150
  64. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  65. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 683
  67. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 24
  68. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 660
  69. 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 38
  70. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  71. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  74. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 9 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 9 occurred at disk power-on lifetime: 4128 hours (172 days + 0 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 51 08 4b 32 7a e7 Error: UNC 8 sectors at LBA = 0x077a324b = 125448779
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. c8 00 08 47 32 7a e7 08 01:33:28.005 READ DMA
  104. ec 00 00 00 00 00 a0 08 01:33:27.999 IDENTIFY DEVICE
  105. ef 03 46 00 00 00 a0 08 01:33:27.999 SET FEATURES [Set transfer mode]
  106.  
  107. Error 8 occurred at disk power-on lifetime: 4128 hours (172 days + 0 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 40 51 10 4b 32 7a e7 Error: UNC 16 sectors at LBA = 0x077a324b = 125448779
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. c8 00 10 47 32 7a e7 08 01:33:26.357 READ DMA
  119. c8 00 10 87 75 7c e7 08 01:33:26.356 READ DMA
  120. c8 00 20 67 75 7c e7 08 01:33:26.342 READ DMA
  121. c8 00 10 a7 14 11 e0 08 01:33:26.342 READ DMA
  122. c8 00 20 87 14 11 e0 08 01:33:26.336 READ DMA
  123.  
  124. Error 7 occurred at disk power-on lifetime: 4128 hours (172 days + 0 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 51 08 4b 32 7a e7 Error: UNC 8 sectors at LBA = 0x077a324b = 125448779
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. c8 00 08 47 32 7a e7 08 01:31:49.104 READ DMA
  136. b0 da 00 00 4f c2 00 08 01:30:37.622 SMART RETURN STATUS
  137. b0 d0 01 00 4f c2 00 08 01:30:37.618 SMART READ DATA
  138. b0 d1 01 00 4f c2 00 08 01:30:37.613 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  139. e5 00 00 00 00 00 00 08 01:30:37.613 CHECK POWER MODE
  140.  
  141. Error 6 occurred at disk power-on lifetime: 4128 hours (172 days + 0 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 40 51 08 4b 32 7a e7 Error: UNC 8 sectors at LBA = 0x077a324b = 125448779
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. c8 00 08 47 32 7a e7 08 01:29:51.827 READ DMA
  153. c8 00 00 e7 32 7a e7 08 01:29:51.823 READ DMA
  154. c8 00 08 5f 24 61 e0 08 01:29:51.823 READ DMA
  155. c8 00 08 77 24 61 e0 08 01:29:51.823 READ DMA
  156.  
  157. Error 5 occurred at disk power-on lifetime: 4128 hours (172 days + 0 hours)
  158. When the command that caused the error occurred, the device was active or idle.
  159.  
  160. After command completion occurred, registers were:
  161. ER ST SC SN CL CH DH
  162. -- -- -- -- -- -- --
  163. 40 51 00 4b 32 7a e7 Error: UNC at LBA = 0x077a324b = 125448779
  164.  
  165. Commands leading to the command that caused the error were:
  166. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  167. -- -- -- -- -- -- -- -- ---------------- --------------------
  168. c8 00 00 e7 31 7a e7 08 01:29:50.178 READ DMA
  169. c8 00 08 7f 24 61 e0 08 01:29:50.177 READ DMA
  170. c8 00 80 67 31 7a e7 08 01:29:50.177 READ DMA
  171. c8 00 40 27 31 7a e7 08 01:29:50.177 READ DMA
  172. c8 00 20 07 31 7a e7 08 01:29:50.176 READ DMA
  173.  
  174. SMART Self-test log structure revision number 1
  175. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  176. # 1 Short offline Completed without error 00% 4411 -
  177. # 2 Short offline Completed without error 00% 4186 -
  178. # 3 Short offline Completed without error 00% 4142 -
  179. # 4 Conveyance offline Completed: read failure 90% 4126 125448779
  180. # 5 Short offline Completed: read failure 90% 4126 125448779
  181. # 6 Short offline Completed: read failure 90% 4126 125448779
  182. # 7 Short offline Completed: read failure 90% 4126 125448779
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!