Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.14.0-ipipe+ (max@lukather) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #5 Fri Jun 6 15:15:14 CEST 2014
CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: SAMA5D3 Xplained
bootconsole [earlycon0] enabled
Memory policy: Data cache writeback
AT91: Detected soc type: sama5d3
AT91: Detected soc subtype: sama5d36
AT91: sram at 0x300000 of 0x20000 mapped at 0xfef58000
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyS0,115200 earlyprintk lpj=877568 root=/dev/nfs ip=dhcp nfsroot=192.168.0.40:/srv/nfs/sysdev rw mtdparts=atmel_nand:256k(at91bootstrap),512k(uboot),256k(env),256k(env-backup),128k(dtb),5m(kernel),2m(rootfs)ro,-(data)
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 253288K/262144K available (4499K kernel code, 206K rwdata, 1220K rodata, 175K init, 338K bss, 8856K reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc059e0b0   (5721 kB)
      .init : 0xc059f000 - 0xc05cae24   ( 176 kB)
      .data : 0xc05cc000 - 0xc05ffaa0   ( 207 kB)
       .bss : 0xc05ffaa0 - 0xc065453c   ( 339 kB)
NR_IRQS:16 nr_irqs:16 16
AT91 I-pipe timer: using TC3, div: 128, freq: 1.031250 MHz, wrap: 63.550060 ms
Interrupt pipeline (release #1)
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 175.51 BogoMIPS (lpj=877568)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x204482d8 - 0x20448330
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
No ATAGs?
AT91: Power Management
gpio-at91 fffff200.gpio: at address fefff200
gpio-at91 fffff400.gpio: at address fefff400
gpio-at91 fffff600.gpio: at address fefff600
gpio-at91 fffff800.gpio: at address fefff800
gpio-at91 fffffa00.gpio: at address fefffa00
pinctrl-at91 pinctrl.3: initialized AT91 pinctrl driver
I-pipe, 1.031 MHz clocksource
bio: create slab <bio-0> at 0
at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
at91_i2c f0014000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
at91_i2c f0014000.i2c: AT91 i2c bus driver.
at91_i2c f0018000.i2c: using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers
at91_i2c f0018000.i2c: AT91 i2c bus driver.
at91_i2c f801c000.i2c: can't get a DMA channel for tx
at91_i2c f801c000.i2c: can't use DMA
at91_i2c f801c000.i2c: AT91 i2c bus driver.
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource ipipe_tsc