Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- 2006, 2007, 2008, 2009, 2010, 2011, 2012
- The NetBSD Foundation, Inc. All rights reserved.
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- NetBSD 6.99.11 (FAFNER) #0: Sat Sep 22 14:31:04 CEST 2012
- bjorn@fafner:/usr/obj/sys/arch/i386/compile/FAFNER
- total memory = 991 MB
- avail memory = 967 MB
- timecounter: Timecounters tick every 10.000 msec
- timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
- Packard Bell BV IMEDIA MC 2590 (PB34345891)
- mainbus0 (root)
- cpu0 at mainbus0 apid 0timecounter: Timecounter "lapic" frequency 199594333 Hz quality -100
- : Intel(R) Pentium(R) 4 CPU 3.00GHz, id 0xf49
- cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.00GHz, id 0xf49
- ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
- acpi0 at mainbus0: Intel ACPICA 20110623
- acpi0: X/RSDT: OemId <PacBel,PBDTNB00,11000607>, AslId <MSFT,00000097>
- ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node 0xc19b6484), AE_INVALID_TABLE_LENGTH (20110623/psparse-560)
- ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node 0xc19b6584), AE_INVALID_TABLE_LENGTH (20110623/psparse-560)
- acpi0: SCI interrupting at int 9
- timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
- hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
- timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
- attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
- pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
- midi0 at pcppi1: PC speaker
- spkr0 at pcppi1
- sysbeep0 at pcppi1
- npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
- npx1: reported by CPUID; using exception 16
- RMSC (PNP0C02) at acpi0 not configured
- pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
- pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
- SIOR (PNP0C02) at acpi0 not configured
- OMSC (PNP0C02) at acpi0 not configured
- PCIE (PNP0C02) at acpi0 not configured
- RMEM (PNP0C01) at acpi0 not configured
- acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
- THRM (ACPI Object Type 'Thermal') at acpi0 not configured
- apm0 at acpi0: Power Management spec V1.2
- attimer1: attached to pcppi1
- pckbd0 at pckbc1 (kbd slot)
- pckbc1: using irq 1 for kbd slot
- wskbd0 at pckbd0: console keyboard
- pms0 at pckbc1 (aux slot)
- pckbc1: using irq 12 for aux slot
- wsmouse0 at pms0 mux 0
- pci0 at mainbus0 bus 0: configuration mode 1
- pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
- pci_mem_find: 64-bit memory map which is inaccessible on a 32-bit platform
- pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5a33 (rev. 0x01)
- ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x5a3f (rev. 0x00)
- pci1 at ppb0 bus 1
- pci1: i/o space, memory space enabled
- vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x5a61 (rev. 0x00)
- wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
- wsmux1: connecting to wsdisplay0
- radeondrm0 at vga0: ATI Radeon RC410 XPRESS 200
- radeondrm0: Initialized radeon 1.29.0 20080613
- ppb1 at pci0 dev 7 function 0: vendor 0x1002 product 0x5a39 (rev. 0x00)
- ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
- pci2 at ppb1 bus 2
- pci2: i/o space, memory space enabled, rd/line, wr/inv ok
- vendor 0x1033 product 0x0194 (USB serial bus, interface 0x30, revision 0x03) at pci2 dev 0 function 0 not configured
- ixpide0 at pci0 dev 18 function 0: ATI Technologies IXP IDE Controller (rev. 0x00)
- ixpide0: bus-master DMA support present
- ixpide0: primary channel configured to native-PCI mode
- ixpide0: using ioapic0 pin 22 for native-PCI interrupt
- atabus0 at ixpide0 channel 0
- ixpide0: secondary channel configured to native-PCI mode
- atabus1 at ixpide0 channel 1
- ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4387 (rev. 0x00)
- ohci0: interrupting at ioapic0 pin 16
- ohci0: OHCI version 1.0, legacy support
- usb0 at ohci0: USB revision 1.0
- ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4388 (rev. 0x00)
- ohci1: interrupting at ioapic0 pin 17
- ohci1: OHCI version 1.0, legacy support
- usb1 at ohci1: USB revision 1.0
- ohci2 at pci0 dev 19 function 2: vendor 0x1002 product 0x4389 (rev. 0x00)
- ohci2: interrupting at ioapic0 pin 18
- ohci2: OHCI version 1.0, legacy support
- usb2 at ohci2: USB revision 1.0
- ohci3 at pci0 dev 19 function 3: vendor 0x1002 product 0x438a (rev. 0x00)
- ohci3: interrupting at ioapic0 pin 17
- ohci3: OHCI version 1.0, legacy support
- usb3 at ohci3: USB revision 1.0
- ohci4 at pci0 dev 19 function 4: vendor 0x1002 product 0x438b (rev. 0x00)
- ohci4: interrupting at ioapic0 pin 18
- ohci4: OHCI version 1.0, legacy support
- usb4 at ohci4: USB revision 1.0
- ehci0 at pci0 dev 19 function 5: vendor 0x1002 product 0x4386 (rev. 0x00)
- ehci0: applying AMD SB600/SB700 USB freeze workaround
- ehci0: interrupting at ioapic0 pin 19
- ehci0: dropped intr workaround enabled
- ehci0: EHCI version 1.0
- ehci0: companion controllers, 2 ports each: ohci0 ohci1 ohci2 ohci3 ohci4
- usb5 at ehci0: USB revision 2.0
- piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x13)
- piixpm0: interrupting at SMI, polling
- iic0 at piixpm0: I2C bus
- ixpide1 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
- ixpide1: bus-master DMA support present
- ixpide1: primary channel configured to compatibility mode
- ixpide1: primary channel interrupting at ioapic0 pin 14
- atabus2 at ixpide1 channel 0
- ixpide1: secondary channel configured to compatibility mode
- ixpide1: secondary channel interrupting at ioapic0 pin 15
- atabus3 at ixpide1 channel 1
- pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x438d (rev. 0x00)
- ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
- pci3 at ppb2 bus 3
- pci3: i/o space, memory space enabled
- emuxki0 at pci3 dev 1 function 0: vendor 0x1102 product 0x0002 (rev. 0x07)
- emuxki0: interrupting at ioapic0 pin 21
- emuxki0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
- emuxki0: ac97: ext id 0x200<AMAP>
- audio0 at emuxki0: full duplex, playback, capture, mmap, independent
- vendor 0x1102 product 0x7002 (miscellaneous input, revision 0x07) at pci3 dev 1 function 1 not configured
- wm0 at pci3 dev 2 function 0: Intel i82541PI 1000BASE-T Ethernet (rev. 0x05)
- wm0: interrupting at ioapic0 pin 22
- wm0: 32-bit 33MHz PCI bus
- wm0: 64 word (6 address bits) MicroWire EEPROM
- wm0: Ethernet address xx:xx:xx:xx:xx:xx
- igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
- igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
- rtk0 at pci3 dev 5 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
- rtk0: interrupting at ioapic0 pin 20
- rtk0: Ethernet address xx:xx:xx:xx:xx:xx
- rlphy0 at rtk0 phy 7: Realtek internal PHY
- rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- isa0 at pcib0
- acpicpu0 at cpu0: ACPI CPU
- pci_mem_find: 64-bit memory map which is inaccessible on a 32-bit platform
- acpicpu0: C1: HLT, lat 0 us, pow 0 mW
- acpicpu1 at cpu1: ACPI CPU
- pci_mem_find: 64-bit memory map which is inaccessible on a 32-bit platform
- timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
- timecounter: Timecounter "TSC" frequency 2992659830 Hz quality 3000
- IPsec: Initialized Security Association Processing.
- uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub0: 2 ports with 2 removable, self powered
- uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub1: 2 ports with 2 removable, self powered
- uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub2: 2 ports with 2 removable, self powered
- uhub3 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub3: 2 ports with 2 removable, self powered
- uhub4 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub4: 2 ports with 2 removable, self powered
- uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
- uhub5: 10 ports with 10 removable, self powered
- ugen0 at uhub1 port 2
- ugen0: American Power Conversion Back-UPS CS 350 FW:807.q7.I USB FW:q7, rev 1.10/0.06, addr 2
- wd0 at atabus0 drive 0
- wd0: <ST3250820AS>
- wd0: drive supports 16-sector PIO transfers, LBA48 addressing
- wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
- wd0: 32-bit data port
- wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
- wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
- wd1 at atabus1 drive 0
- wd1: <ST3250820AS>
- wd1: drive supports 16-sector PIO transfers, LBA48 addressing
- wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
- wd1: 32-bit data port
- wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
- wd1(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
- atapibus0 at atabus2: 2 targets
- cd0 at atapibus0 drive 0: <PHILIPS DVD8801, , NW02> cdrom removable
- cd0: 32-bit data port
- cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
- cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
- crypto: assign driver 0, flags 2
- crypto: driver 0 registers alg 1 flags 0 maxoplen 0
- crypto: driver 0 registers alg 2 flags 0 maxoplen 0
- crypto: driver 0 registers alg 3 flags 0 maxoplen 0
- crypto: driver 0 registers alg 4 flags 0 maxoplen 0
- crypto: driver 0 registers alg 5 flags 0 maxoplen 0
- crypto: driver 0 registers alg 26 flags 0 maxoplen 0
- crypto: driver 0 registers alg 27 flags 0 maxoplen 0
- crypto: driver 0 registers alg 29 flags 0 maxoplen 0
- crypto: driver 0 registers alg 33 flags 0 maxoplen 0
- crypto: driver 0 registers alg 17 flags 0 maxoplen 0
- crypto: driver 0 registers alg 6 flags 0 maxoplen 0
- crypto: driver 0 registers alg 19 flags 0 maxoplen 0
- crypto: driver 0 registers alg 7 flags 0 maxoplen 0
- crypto: driver 0 registers alg 20 flags 0 maxoplen 0
- crypto: driver 0 registers alg 15 flags 0 maxoplen 0
- crypto: driver 0 registers alg 24 flags 0 maxoplen 0
- crypto: driver 0 registers alg 25 flags 0 maxoplen 0
- crypto: driver 0 registers alg 8 flags 0 maxoplen 0
- crypto: driver 0 registers alg 21 flags 0 maxoplen 0
- crypto: driver 0 registers alg 16 flags 0 maxoplen 0
- crypto: driver 0 registers alg 9 flags 0 maxoplen 0
- crypto: driver 0 registers alg 10 flags 0 maxoplen 0
- crypto: driver 0 registers alg 13 flags 0 maxoplen 0
- crypto: driver 0 registers alg 14 flags 0 maxoplen 0
- crypto: driver 0 registers alg 28 flags 0 maxoplen 0
- crypto: driver 0 registers alg 30 flags 0 maxoplen 0
- crypto: driver 0 registers alg 31 flags 0 maxoplen 0
- crypto: driver 0 registers alg 32 flags 0 maxoplen 0
- crypto: driver 0 registers alg 11 flags 0 maxoplen 0
- crypto: driver 0 registers alg 18 flags 0 maxoplen 0
- crypto: driver 0 registers alg 23 flags 0 maxoplen 0
- crypto: driver 0 registers alg 22 flags 0 maxoplen 0
- boot device: wd0
- root on wd0a dumps on wd0b
- root file system type: ffs
- uhub4: device problem, disabling port 1
- uhub4: device problem, disabling port 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement