API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 25th, 2013
38
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.93 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-29-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda LP
  6. Device Model: ST32000542AS
  7. Serial Number: 5XW02KYJ
  8. LU WWN Device Id: 5 000c50 01630b530
  9. Firmware Version: CC32
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Fri Jan 25 19:06:56 2013 EST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21. See vendor-specific Attribute list for marginal Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 623) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 255) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 086 083 006 Pre-fail Always - 25994027
  61. 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 091 091 020 Old_age Always - 9420
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 34398218390
  65. 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22159
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 092 092 020 Old_age Always - 9090
  68. 183 Runtime_Bad_Block 0x0032 084 084 000 Old_age Always - 16
  69. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 845
  71. 188 Command_Timeout 0x0032 099 082 000 Old_age Always - 12885557373
  72. 189 High_Fly_Writes 0x003a 062 062 000 Old_age Always - 38
  73. 190 Airflow_Temperature_Cel 0x0022 065 030 045 Old_age Always In_the_past 35 (84 62 58 28)
  74. 194 Temperature_Celsius 0x0022 035 070 000 Old_age Always - 35 (0 15 0 0)
  75. 195 Hardware_ECC_Recovered 0x001a 045 022 000 Old_age Always - 25994027
  76. 197 Current_Pending_Sector 0x0012 095 095 000 Old_age Always - 217
  77. 198 Offline_Uncorrectable 0x0010 095 095 000 Old_age Offline - 217
  78. 199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 1181
  79. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 27603754837411
  80. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 243065804
  81. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2538335502
  82.  
  83. SMART Error Log Version: 1
  84. ATA Error Count: 851 (device log contains only the most recent five errors)
  85. CR = Command Register [HEX]
  86. FR = Features Register [HEX]
  87. SC = Sector Count Register [HEX]
  88. SN = Sector Number Register [HEX]
  89. CL = Cylinder Low Register [HEX]
  90. CH = Cylinder High Register [HEX]
  91. DH = Device/Head Register [HEX]
  92. DC = Device Command Register [HEX]
  93. ER = Error register [HEX]
  94. ST = Status register [HEX]
  95. Powered_Up_Time is measured from power on, and printed as
  96. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  97. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  98.  
  99. Error 851 occurred at disk power-on lifetime: 22158 hours (923 days + 6 hours)
  100. When the command that caused the error occurred, the device was active or idle.
  101.  
  102. After command completion occurred, registers were:
  103. ER ST SC SN CL CH DH
  104. -- -- -- -- -- -- --
  105. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  106.  
  107. Commands leading to the command that caused the error were:
  108. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  109. -- -- -- -- -- -- -- -- ---------------- --------------------
  110. 60 00 18 ff ff ff 4f 00 4d+06:28:24.885 READ FPDMA QUEUED
  111. 27 00 00 00 00 00 e0 00 4d+06:28:24.884 READ NATIVE MAX ADDRESS EXT
  112. ec 00 00 00 00 00 a0 00 4d+06:28:24.883 IDENTIFY DEVICE
  113. ef 03 46 00 00 00 a0 00 4d+06:28:24.883 SET FEATURES [Set transfer mode]
  114. 27 00 00 00 00 00 e0 00 4d+06:28:24.859 READ NATIVE MAX ADDRESS EXT
  115.  
  116. Error 850 occurred at disk power-on lifetime: 22158 hours (923 days + 6 hours)
  117. When the command that caused the error occurred, the device was active or idle.
  118.  
  119. After command completion occurred, registers were:
  120. ER ST SC SN CL CH DH
  121. -- -- -- -- -- -- --
  122. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  123.  
  124. Commands leading to the command that caused the error were:
  125. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  126. -- -- -- -- -- -- -- -- ---------------- --------------------
  127. 60 00 20 ff ff ff 4f 00 4d+06:28:21.104 READ FPDMA QUEUED
  128. 60 00 18 ff ff ff 4f 00 4d+06:28:21.104 READ FPDMA QUEUED
  129. 60 00 28 ff ff ff 4f 00 4d+06:28:21.103 READ FPDMA QUEUED
  130. 60 00 20 ff ff ff 4f 00 4d+06:28:21.103 READ FPDMA QUEUED
  131. 60 00 28 ff ff ff 4f 00 4d+06:28:21.103 READ FPDMA QUEUED
  132.  
  133. Error 849 occurred at disk power-on lifetime: 22158 hours (923 days + 6 hours)
  134. When the command that caused the error occurred, the device was active or idle.
  135.  
  136. After command completion occurred, registers were:
  137. ER ST SC SN CL CH DH
  138. -- -- -- -- -- -- --
  139. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  140.  
  141. Commands leading to the command that caused the error were:
  142. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  143. -- -- -- -- -- -- -- -- ---------------- --------------------
  144. 60 00 10 ff ff ff 4f 00 4d+06:28:17.330 READ FPDMA QUEUED
  145. 60 00 28 ff ff ff 4f 00 4d+06:28:17.330 READ FPDMA QUEUED
  146. 60 00 18 ff ff ff 4f 00 4d+06:28:17.330 READ FPDMA QUEUED
  147. 60 00 10 ff ff ff 4f 00 4d+06:28:17.330 READ FPDMA QUEUED
  148. 60 00 18 ff ff ff 4f 00 4d+06:28:17.330 READ FPDMA QUEUED
  149.  
  150. Error 848 occurred at disk power-on lifetime: 22158 hours (923 days + 6 hours)
  151. When the command that caused the error occurred, the device was active or idle.
  152.  
  153. After command completion occurred, registers were:
  154. ER ST SC SN CL CH DH
  155. -- -- -- -- -- -- --
  156. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  157.  
  158. Commands leading to the command that caused the error were:
  159. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  160. -- -- -- -- -- -- -- -- ---------------- --------------------
  161. 60 00 50 ff ff ff 4f 00 4d+06:28:13.531 READ FPDMA QUEUED
  162. 60 00 00 ff ff ff 4f 00 4d+06:28:13.518 READ FPDMA QUEUED
  163. 60 00 08 ff ff ff 4f 00 4d+06:28:13.517 READ FPDMA QUEUED
  164. 60 00 08 ff ff ff 4f 00 4d+06:28:13.517 READ FPDMA QUEUED
  165. 60 00 18 ff ff ff 4f 00 4d+06:28:13.517 READ FPDMA QUEUED
  166.  
  167. Error 847 occurred at disk power-on lifetime: 22158 hours (923 days + 6 hours)
  168. When the command that caused the error occurred, the device was active or idle.
  169.  
  170. After command completion occurred, registers were:
  171. ER ST SC SN CL CH DH
  172. -- -- -- -- -- -- --
  173. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  174.  
  175. Commands leading to the command that caused the error were:
  176. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  177. -- -- -- -- -- -- -- -- ---------------- --------------------
  178. 60 00 00 ff ff ff 4f 00 4d+06:28:09.750 READ FPDMA QUEUED
  179. 60 00 08 ff ff ff 4f 00 4d+06:28:09.747 READ FPDMA QUEUED
  180. 60 00 08 ff ff ff 4f 00 4d+06:28:09.743 READ FPDMA QUEUED
  181. 60 00 08 ff ff ff 4f 00 4d+06:28:09.743 READ FPDMA QUEUED
  182. 60 00 10 ff ff ff 4f 00 4d+06:28:09.743 READ FPDMA QUEUED
  183.  
  184. SMART Self-test log structure revision number 1
  185. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  186. # 1 Short offline Completed without error 00% 2451 -
  187.  
  188. SMART Selective self-test log data structure revision number 1
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Not_testing
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!