Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- __asm_func_dummy
- *************************************************************************
- type
- port
- n_regs
- region
- size
- crypto
- num_dev
- plat.id..
- sys.param.load.rom1st
- sys.syscon.pversion.
- sys.flash.fmt.
- sys.flash.boot.
- sys.flash.ext.
- lv1.maxplgid..
- lv1.specver..
- lv1.buildid..
- lv1.ts.size.
- lv1.ts.start.
- lv1.rsx.enable.
- spdr.gbe0.macaddr.
- sys.debug.device
- rsx.rdcy..
- lv1.iosys.enable.
- ios.net.eurus.lpar
- sys.hw.config.version
- sys.hw.config.
- sys.hw.model.emulate
- sys.ac.sd.
- ben...
- be...
- be..tb_clk.
- be..clock.
- be..nclk.
- be..ioifn.
- be..ioif.addr
- mun...
- mu...
- mu..size.
- sys.be..spursvsl
- sys.be..ausrspun
- sys.be..asysspun
- Zspider_ddr: module size is not supported.
- be.0.tb_clk
- sys.lv1.large_pciex
- sys.syscon.protocol_version
- [spider_sc] message header from syscon is not correct.
- header =
- [spider_sc] message from syscon is checksum error.
- [spider_sc] syscon sends other port interrupt(0x
- sc_tc =
- , sc_rc =
- [spider_sc] doesn't add internal interrupt handler
- [spider_sc] doesn't connect internal interrupt handler
- [header:
- [body: 0x
- sys.lv1.rsxenable
- sys.lv1.rsxdebug
- plat.id
- sys.ac.misc2
- rsx t: close
- rsx driver assert failed: /space/aoki/svn/clean/sys/trunk/cellos/src/implementation/driver/rsx/core/device.h
- rsx driver assert failed
- rsx driver assert failed: core/device.cc
- rsx t: open
- rsx:
- vpe:
- shd:
- invalid context attrib :
- rsx65 a01
- rsx65 a02
- rsx65 a03
- rsx65 a04
- rsx65 a05
- rsx65 a06
- rsx65 a07
- rsx65 a08
- rsx65 a09
- rsx65 a10
- rsx65 a11
- rsx65 a12
- rsx65 a13
- rsx65 a14
- rsx65 a15
- rsx65 b01
- rsx65 b02
- rsx65 b03
- rsx65 b04
- rsx65 b05
- rsx65 b06
- rsx65 b07
- rsx65 b08
- rsx65 b09
- rsx65 b10
- rsx65 b11
- rsx65 b12
- rsx65 b13
- rsx65 b14
- rsx65 b15
- rsx65 c01
- rsx65 c02
- rsx65 c03
- rsx65 c04
- rsx65 c05
- rsx65 c06
- rsx65 c07
- rsx65 c08
- rsx65 c09
- rsx65 c10
- rsx65 c11
- rsx65 c12
- rsx65 c13
- rsx65 c14
- rsx65 c15
- rsx driver assert failed: core/memory.cc
- rsx driver assert failed: core/context.cc
- rsx driver assert failed: utils/bitmap.cc
- rsx ioif0 bus
- rsx driver assert failed: bus/ioif0.cc
- RSX EIC driver initialization failed
- rsx driver assert failed: device/eic.cc
- rsx driver assert failed: device/master.cc
- rsx.rdcy.2
- rsx driver assert failed: device/fb.cc
- rsx driver assert failed: device/fifo.cc
- rsx driver assert failed: device/graph.cc
- rsx ctxsw driver timeout! please report
- rsx driver assert failed: device/graph_ctx_rsx.cc
- Invalid
- rsx driver assert failed: device/clock_rsx.cc
- nvclk
- geom clkshader clk
- rop clk
- memory clk
- display clk
- host clk
- rsx driver assert failed: device/audio.cc
- rsx driver assert failed: post/post_rsx.cc
- g_rsx_revoffset
- g_chipid_rev
- g_chipid_factory
- g_chipid_lot
- g_chipid_wafer
- g_chipid_wafer_x
- g_chipid_wafer_y
- g_chipid_ds_line
- g_chipid_ds_rev
- g_chipid_ds_dut
- g_fuse_vid
- g_fuse_vidbin
- g_fuse_dram
- g_fuse_mclkt
- g_fuse_gv
- g_fuse_svop
- g_fuse_svop_enable
- g_fuse_pt
- g_fuse_svop2
- g_fuse_mp
- rsx memory check failed. errors:
- rsx.rdcy.1
- rsx rom abort!
- sys.lv1.rsxmemcheck
- rsx t: post
- rsx driver assert failed: object/context_dma.cc
- rsx driver assert failed: object/nv_class.cc
- rsx driver assert failed: object/sw_class.cc
- rsx driver assert failed: object/channel.cc
- rsx driver assert failed: object/hash_table.cc
- rsx driver assert failed: object/sw_driver.cc
- rsx driver assert failed: object/vfb.cc
- rsx driver assert failed: object/video_rsx.cc
- iosys::bus::main() failed (
- iosys::network::init() failed (
- iosys::usb::init() failed (
- sys.lv1.iosys.storage
- # mapped reg busaddr:0x
- ea:0x
- size:0x
- lpar:
- lock_count:
- reserved reg:0x
- : size
- larger than contig size
- # 0x
- 0x
- device : 0x
- reserved region object size : 0x
- mapped region object size : 0x
- # MMIO regions
- # DMA regions
- ~internal_io_allocater()
- ~io_allocater()
- # allocated io region. io_addr:0x
- size:0x
- allocate_io_segment error:0x
- lpar_id :
- base_address : 0x
- region_size : 0x
- size : 0x
- page_size :
- external_io_allocater can't allocate continuous IO region for GOS
- allocate_io_segment_internal error:0x
- ~external_io_allocater()
- can't create ebus driver
- can't create gbus driver
- sys.lv1.iosys.errorhandler
- sb error handler level is changed.(sys.lv1.iosys.errorhandler is
- sb_device set_iosegment error:0x
- controller id:
- addr: 0x
- data: 0x
- ######## update io base segment. io addr : 0x
- SB DMA Controller initialization error:
- PCI Express use 1GB MMIO area.(sys.lv1.large_pciex is 1.)
- DDR : 0x2000_0000 - 0x2FFF_FFFF 256MB
- PCI : 0x3000_0000 - 0x3FFF_FFFF 256MB
- PCI Ex : 0x4000_0000 - 0x7FFF_FFFF 1GB
- sys.lv1.iosys.pci.d.thread
- sys.lv1.iosys.pci.d.thread is
- recover_ip_core_master_error. controller_id:
- bus: warning ! IOIFC trxba is not zero : 0x
- #### SB DEVICE ####
- # controller_id :
- # ioid : 0x
- # bus_master_id : 0x
- # base_io_segment : 0x
- # sb_master_transaction_base_address_ : 0x
- ### Dump INTERRUPTS ###
- TIRCS 0x
- TIRDEN 0x
- TIREMSKA 0x
- TIREMSKB 0x
- TIRPIEN 0x
- TIRPNDA 0x
- TIRPNDB 0x
- TIRPPNDA 0x
- TIRPPNDB 0x
- TIRCFGA[
- ] 0x
- TIRCFGB[
- can't get GBUSC forward region 3
- Dump PIO registers
- piodo : 0x
- piodi : 0x
- piodir : 0x
- piood : 0x
- pioaen : 0x
- pioactl : 0x
- pioco : 0x
- sys.hw.config
- pioc : 0x
- ###### dump ebusc SMMIO registers ######
- ebusc ebintst : 0x
- ebusc ebintmk : 0x
- ebusc ebtoinf : 0x
- ebusc ebftov : 0x
- ebusc ebcadmatch0 : 0x
- ebusc ebcactrl0 : 0x
- ebusc ebcadbs0 : 0x
- ebusc ebcadmatch1 : 0x
- ebusc ebcactrl1 : 0x
- ebusc ebcadbs1 : 0x
- ebusc ebcadmatch2 : 0x
- ebusc ebcactrl2 : 0x
- ebusc ebcadbs2 : 0x
- ebusc ebcadmatch3 : 0x
- ebusc ebcactrl3 : 0x
- ebusc ebcadbs3 : 0x
- ebusc dmatdsad : 0x
- ebusc dmatctrl : 0x
- ebusc dmactdad : 0x
- ebusc dmadmyad : 0x
- ebusc dmarsize : 0x
- ebusc sbadmatch1 : 0x
- ebusc sbadmatch2 : 0x
- ebusc iom_acte0 : 0x
- ebusc iom_acte1 : 0x
- ebusc iot_acte0 : 0x
- ebusc iot_acte1 : 0x
- can't get PCI sconfig_region
- can't get PCI mmio_region
- can't get PCI memory region
- sys.lv1.iosys.pci.retry
- sys.lv1.iosys.pci.retry is
- sb_epcic_driver 1st step error:0x
- sb_epcic_driver::initialize. wrong state
- pre_initialize error
- sb_epcic_driver 2nd step error:0x
- des[
- ]:0x
- io_page_size is wrong. 0x
- ddr_address alignment is wrong. 0x
- ddr_size is wrong. 0x
- xdr_address alignment is wrong. 0x
- xdr_size is wrong. 0x
- xdr size is not same as ddr_size.
- xdr_size : 0x
- ddr_size : 0x
- SDMAC: can't get sb bus driver
- SDMAC: can't get sdmac driver
- SDMAC: can't get sdmac device
- SDMAC: can't reserve dma region. error:
- ## PCI BUS DRIVER debug##
- m_p_controller : 0x
- m_device_num :
- PCI io shortage
- PCI memory shortage
- This second_ether is used by Lv2
- Unknown PCI header type(
- bus:
- dev:
- func:
- ## PCI DEVICE DEBUG ##
- bus : 0x
- device : 0x
- function : 0x
- vendor_id : 0x
- device_id : 0x
- class : 0x
- interrupt_number :
- ] is_io : 0x
- ] bar_id : 0x
- ] addr : 0x
- ] size : 0x
- #Configuration space
- config read : 0x
- Unsupported PCI Ex device/port type:0x
- Unsupported device/port type:0x
- Can't get PCI Express capability.
- Ignore this PCI-PCI Bridge.
- PANIC: Can't create node: name =
- intr
- type
- data
- pci_bus
- pci_dev
- pci_fun
- num_dev
- sb_error_handler started. level:
- IOIF trace completed.
- ioifc event status : 0x
- # checkstop 0x
- === Begin of TRACE DUMP ===
- === End of TRACE DUMP ===
- TRACE DUMP FAILED
- ## IOIF tracer is busy!
- IOIF trace break_address : 0x
- IOIF trace break_address_mask : 0x
- # root error : 0x
- root error id : 0x
- device status : 0x
- correctable error : 0x
- uncorrectable error : 0x
- first error ptr : 0x
- header[0] log : 0x
- header[1] log : 0x
- header[2] log : 0x
- header[3] log : 0x
- # core & device access error : 0x
- dummy access error
- common access error
- portA access error
- completion status error
- status:0x
- completorID:0x
- completion length error
- # protection error : 0x
- siliconback bus plane serror
- Thread0 error. addr:0x
- cmd:0x
- RequesterID : 0x
- Thread1 error. addr:0x
- Thread2 error. addr:0x
- Thread3 error. addr:0x
- cmd:0x
- ### PCI Ex error interrupt: 0x
- ### SbError
- ### PCI Master error or Reset assert
- ### PCI Master parity error addr(PCI): 0x
- ### PCI Master fatal error addr(PCI): 0x
- ### PCI Reset asserted
- ### PCI Reset deasserted
- ### PCI error interrupt: 0x
- ### Response Error
- ### Protection Error
- ### Error address: 0x
- ### Error command: 0x
- ### PCI PERR
- ### PCI SERR
- ### PCI Controller error
- ### EBUSC error interrupt: 0x
- ### SError
- ### Response error
- ### Address Hole Write error
- ### Master transaction flow timeout error
- ### Slave transaction flow timeout error
- ### GBUSC error interrupt: 0x
- ### Error address0: 0x
- ### Error address1: 0x
- ### Error address2: 0x
- ### Error address3: 0x
- ### Error address4: 0x
- ### Error address5: 0x
- ### OCP->GBUS timeout error
- ### GBUS timeout error
- ### GBUS master read access error
- ### EHCI1 error interrupt: 0x
- ### OHCI1 error interrupt: 0x
- ### EHCI0 error interrupt: 0x
- ### OHCI0 error interrupt: 0x
- ### ATAC1 error interrupt: 0x
- ### Illegal configuration error
- ### ATAC0 error interrupt: 0x
- ### GBEC error interrupt(summary): 0x
- ### GBEC error interrupt1: 0x
- ### Rx Protection Error
- ### Tx Protection Error
- ### Rx Response Error
- ### Tx Response Error
- Dump ioifc error info
- : NO ERROR
- interrupt mask : 0x
- IOIFC BUS ERROR LOG : 0x
- IOIFC BUS ERROR LOG ADDR : 0x
- debug mem trigger enable : 0x
- check stop output enable : 0x
- check stop status : 0x
- signal polar reverse : 0x
- [EH] pciexc_serr
- [EH] pciexc_internal
- [EH] epcic_serr
- [EH] epcic_internal
- [EH] ioif event:0x
- log:0x
- sb address:0x
- [EH] Fatal error
- [EH] SBERR happened!
- skip 2nd initialization step
- net: [vlan : off]
- net: [eurus port mirror : on]
- net: [sb port mirror : on]
- sys.wake_source
- spider.gbe0.macaddr.0
- blk_size
- n_blocks
- port
- meddling
- region
- start
- crypto
- n_regs
- sys.flash.ext
- redirection without vflash?
- no loopback device has been set up.
- cancel_request error :
- device_type :
- tag :
- valid :
- lpar_id :
- << put_ioptes failed:
- confirm_close_common.type:
- confirm_status :
- no redirected device set
- invalid storage_device state
- failed to issue read
- sys.ac.misc
- storage: ACL check will be skipped for device id
- Un-initializing
- new SB_Patac memory shortage
- sys.sata.param
- new Pata_TP ERROR
- new ATA_Command ERROR
- new ATAPI_Command ERROR
- ATA PORT:
- CMD ERROR result:0x
- status reg:0x
- error reg:0x
- CMD backup dump
- cm:0x
- fe:0x
- sc:0x
- ll:0x
- lm:0x
- lh:0x
- dv:0x
- ex:0x
- pt:0x
- BDVD: Drive Not ready Timeout
- Device: PATAC0:Reset Timeout
- Device: PATAC1:Reset Timeout
- Device: PATAC Reset Timeout
- wait_host_idle: Warning Wait Long
- wait_host_idle result: 0x
- wait_device_ready: Warning Wait Long
- wait_device_ready result: 0x
- ATA/ATAPI TransSbAddrToPhyAddr search_dma_mapped_bus_region_by_bus_address Fail
- ATA/ATAPI TransSbAddrToPhyAddr get_physical_address Fail 0x:
- Ata port:
- Device not found.
- Ata port:1 Master HDD removed.
- Ata port:0 Slave HDD removed.
- Hex dump 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- SetUDMAMode Master Mode
- SetUDMAMode Slave Mode
- StartDMA Start SBATA Interrupt Status
- ***Start Kick DMA BMID_OFST_QCHCD
- INT MASK:
- SetCurBuff::EA_Data_Buff_Addr :0x
- SetCurBuff::SBA_Data_Buff_Addr:0x
- DMA_Buff::EA_Addr: 0x
- DMA_Buff::EA_region_Size:0x
- DMA_Buff::SB_Buff_Addr: 0x
- PRD_table Make SB_Addr:
- size:
- PRD_table
- BaseAdd:0x
- ByteCount:0x
- EOT
- <<<ERROR>>> PRD overflow
- SetDMA EAddr:0x
- SBAddr:0x
- set_PRD_table fail
- ClearPATACInterrupt Call:
- EnablePATACInterrupt MASK:
- ConnectBusDriver Start.
- ConnectBusDriver create_dma_region fail:0x
- create media interrupt
- create media interrupt handle error :
- ConnectBusDriver End.
- _media_interrupt_handler.
- ACTEINT TimeOutHandler_cmd Called
- Device Reg:0x
- MASTER
- ID_Sirial:
- ID_Product:
- FW_revision:
- SLAVE
- ATA fe:0x
- Packet Dump len:
- Packet Proto:
- ATA/ATAPI Error Reg:
- AltStatus Reg:
- Atapi/Ata Interrupt: TIMEOUT Status
- Device: PATAC0
- Device: PATAC1
- TimeOutHandler_dma Called
- QCHSD :0x
- PTERADD :0x
- MODEREG :0x
- DMA complete:
- EA_Data_Buff_Addr :0x
- SBA_Data_Buff_Addr:0x
- PATAC ACTE0 :0x
- PATAC ACTE1 :0x
- PATAC ACTE2 :0x
- Initiator Agent State 0x
- Master Access Error Address 0x
- Master Access Error Command 0x
- Endian conversion mode 0x
- QCHPRD Reg:0x
- PATAC0:Cable Not Connect
- Device: PATAC0:Cable Not Connect
- PATAC1:Cable Not Connect
- Device: PATAC1:Cable Not Connect
- InitializePATAC Start.
- ConnectBusDriver Fail :
- <<<Error>>> Cannot release PATAC core reset
- InitializePATAC End.
- Atapi/Ata Interrupt: Status
- Interrupt DMA Fail Retry Start
- Interrupt ACTINT_TRANSPARENT Wait
- PIO DATA Transfer Complete
- ATA PIO DATA Transfer Complete
- Atapi/Ata Interrupt ???: Status
- _interrupt_handler Start.
- _interrupt_handler End.
- HDD
- result:0x
- Err:0x
- lsn:
- num:
- flag:
- tag:
- BDVD result:0x
- rev:
- new SB_Encdec ERROR
- encdec_device::initialize end:
- new EDEC_TP ERROR
- encdec_drive: request_complete tag:
- ret:
- Encdec ioctl() Kset Seqence cmd:
- encdec_device::encdec_device(). start device ID:
- SYSTEM CLOCK Fail: Set:
- ENCDEC TransLparAddrToSbAddr invalid address
- request usrbuf lpar_addr:0x
- lpar_id :0x
- request dscbuf lpar_addr:0x
- req size:0x
- sb_src:0x
- EdecKset start.
- EdecKset end.
- EdecKgenFlash.
- : in_ba addr invalid?:
- : out_ba addr invalid?:
- ENCDEC EdecXTS3 TransLparAddrToSbAddr invalid address
- EdecSS start.
- EdecSS end. DMA Kicked
- EdecKgen2 start.
- EdecKgen2 end.
- EdecKgen1 start.
- EdecKgen1 end.
- Encdec decsec.
- EdecKset OK.
- EdecKset NG.
- ########## Test Mode Found ##########
- ENCDEC TransSbAddrToPhyAddr search_dma_mapped_bus_region_by_bus_address Fail
- ENCDEC TransSbAddrToPhyAddr get_physical_address Fail 0x:
- InitializeENCDEC Start.
- ##### Encdec timeout_handler called ######
- EncDec Interrupt Reason:
- ret:
- SetStgReadDesc lbn:
- secsize:
- key:
- src_addr:
- dst_addr:
- SetStgSsEncdec ENC OR DEC:
- lbn:
- usr_sb_addr:
- ss_sb_addr:
- ss_io_count:
- SetStgSsDbufEncdec ENC OR DEC:
- sp_sb_addr:
- buf_sb_addr:
- sys.flash.boot
- new SB_Starship memory shortage
- new sp_tp(Spansion TP) memory shortage
- FLASH Memory (SS2) on_complete: Lsn:0x
- Num:0x
- Buf:0x
- Scn:0x
- TEST: Start.
- Starship Reset Error:
- TEST: End.
- TEST: Read lsn:0x
- num:0x
- SS2 status:0x
- TEST: Current Read :0x
- ##### StarShip ERROR
- unknown scenario:
- stage:
- intr_exec proto:
- nsec:
- ea:
- sb:
- SWResetPtcl() ERROR:0x
- SS2 HW Reset ERROR:0x
- SSTransfer Start. Protcol:
- SSTransfer PIO IN
- SSTransfer PIO OUT
- SSTransfer DMA
- SSTransfer End.
- SSOperation cmd:
- stat:
- istat:
- Nor_flash Chip Not Found
- NOR but unknown
- NOR flash is protected. addr:
- NOR flash buffer addr Translate fail
- NOR flash is protected. addr :
- NOR flash is corrupted, data:
- expect:
- addr:
- buf_num:
- NOR write to buffer was aborted.. data:
- NOR data verify failed...
- write data:
- addr:
- data:
- NOR is corrupted, data:
- NOR flash : Writing to the bit which has not been erased.
- Sector offset :
- flash_data: 0x
- write_data: 0x
- NOR flash: Writing to the bit which has not been erased.
- NOR flash erase data verify failed...
- rom address: 0x
- data: 0x
- NOR flash is protected. addr :
- FLASH (SS2) TransSbAddrToPhyAddr search_dma_mapped_bus_region_by_bus_address Fail
- FLASH (SS2) TransSbAddrToPhyAddr get_physical_address Fail 0x:
- ******** StarShip Dip switch Change ->CH0 **********
- ******** StarShip Wait TIME OUT ********************
- ******** Found StarShip ****************************
- create interrupt handle error :
- create interrupt dma handle error :
- KickDMA dir:
- offset:
- NOR Flash Timeout 10(sec)
- Stg :0x
- Sce :0x
- FLASH Memory (SS2) TimeOut
- Scenario:
- Stage:
- CMD:
- STATUS:
- INTREG:
- INTENREG:
- Ebus int_status:
- mask:
- BAD_BLOCK: Default:
- Low format after:
- OPT_infomation:0x
- StarShip Interrupt: Status
- ######StarShip: Stage
- FLASH Memory (SS2) ERROR CMD: 0x
- STATUS: 0x
- INTREG: 0x
- ADR_HIGH: 0x
- ADR_LOW: 0x
- COUNT: 0x
- FLASH Memory (SS2) Warning: Reading error correction occurs.
- _interrupt_handler_dma Start.
- _interrupt_handler_dma End.
- _interrupt_handler SS Start.
- _interrupt_handler SS End.
- _interrupt_handler_ebus Start.
- _interrupt_handler_ebus End.
- ERROR:: ENCDEC insufficint memory. driver not created
- [31minitialize_virtual_flash: no vflash?
- [30m
- : create_dma_region failed:
- sys.lv1.iosys.pciex
- sys.lv1.iosys.pciex is
- sys.ac.sd
- AddressProtectionDomain::attachAddressSpace : already attached AddressSpace object
- AddressProtectionDomain::~AddressProtectionDomain: The target AddressProtectionDomain object still holds a ProtectionPage object.
- AddressProtectionDomain::~AddressProtectionDomain: The AddressSpace object attached to the target AddressProtectionDomain exists.
- AddressProtectionDomain::getPageAttribute does not found Protection Page Obj. (vaddr:0x%08x)
- AddressProtectionDomain::setPagesAttribute ProtectionPage (0x%08x) does not exist
- AddressProtectionDomain::unmapPage : ProtectionPage (0x%08x) does not exist
- AddressProtectionDomain::unmapPage : ProtectionPage object which has ProtectionPage::ACTIVE exists
- AddressProtectionDomain::mapPage: The specified virtual address or real address is not aligned to the page size which the system defines.
- AddressProtectionDomain::unmapPage : ProtectionPage (0x%08x) does not exist in APD(0x%016x)
- AddressProtectionDomain::mapPage ProtectionPage (0x%08x) already exists
- AddressSpace::~AddressSpace: There are any AddressProtectionDomain objects attaced to the target AddressSpace object.
- There is no AddressProtectionDomain objects associated with the target AddressSpace object.
- ConditionVariable::~ConditionVariable: There are any threads waiting for a signal arriving to the target ConditionalVariable object.
- ConditionVariable::timedWait: The associated Mutex object has not been loced.
- ConditionVariable::timedWait: This member function is called when the Scheduler is locked.
- ConditionVariable::wait: The associated Mutex object has not been locked.
- ConditionVariable::wait: This member function is called when the Scheduler is locked.
- exception handling daemon
- ../src/Core/common/ExceptionHandlingDaemon.cc
- ExceptionHandlingDaemon detects a fatal error.
- the specified stride is smaller than the size of a stack.
- the specified size is not a multiple of stride.
- the specified size is zero.
- MMU::initialize(): resource shortage
- virtualAddress = %p
- vdid_ = %d, vd = %p
- vdid = %d, old vd = %p
- old_vatce_1 = %p, old_vatce_2 = %p, old_vatce_3 = %p
- old_avpn = %p, old_virtual_address = %p
- Mutex::~Mutex(): The target Mutex object has been locked by any threads.
- Mutex::unlock(ErrorCode): The caller thread of this function is not the owner of the target Mutex object.
- Mutex::unlock: The caller thread of this function is not the owner of the target Mutex object.
- Mutex::unlock(ErrorCode): The order of releasing Mutex object is not the order of locking the Mutex object.
- Mutex::unlock: The order of releasing Mutex object is not the order of locking the Mutex object.
- Mutex::lock(): This mermber function is called when the Scheduler is locked.
- Mutex::timedLock(): This mermber function is called when the Scheduler is locked.
- [0] start: 0x%qx, size: %d
- [1] start: 0x%qx, end: 0x%qx
- [2]start: 0x%qx, end: 0x%qx
- nucleus_lock =
- msr_lock =
- dec_lock =
- Thread::Context::~Context(): The target context is used.
- PagePool::allocateContiguousPages: The specified alignment or numberOfPages is zero.
- PagePool::allocateContiguousPages: The specified alignment is not power of two.
- RelayPoint::wait: This member function is called when the scheduler is locked.
- RelayPoint::initialize: The RelayPoint object is initialized while some threads are waiting on it.
- RelayPoint::initialize: The RelayPoint object is initialized while the thread associated to it has not been terminated.
- RelayPoint::~RelayPoint(): The RelayPoint object is deleted while some threads are waiting on it
- RelayPoint::~RelayPoint(): The RelayPoint object is deleted while the thread associated to it has not been terminated.
- idling thread
- readyQ
- readyQ suc
- thread =
- cause =
- info =
- srr0 =
- srr1 =
- lr =
- ctr =
- GPR
- Stack trace
- Scheduler::onStop(%p, %d, %p)
- NeOS kernel for BPA
- Sony Cell OS Team
- ../src/Core/common/Thread.cc
- Thread::_terminate: the thread is inheriting the priority .
- Thread:~Thread(): The target Thread object is not in dormant state.
- a system exception(%d,%08x) is raised in the exception handling daemon
- Thread::releaseTypeFlag: invalid type flag.
- Thread::releaseTypeFlag: releasing un-assigned type bit.
- Thread::terminate: The target Thread object holds any Mutex locks.
- Thread::restart: The target Thread object is not in stopped state.
- Thread::start: The target Thread object is not in dormant state.
- Thread::start: The target Thread object has not been configured.
- Thread::start: The specified RelayPoint is used by another Thread object.
- Thread::configure: The target thread object is not in dormant state.
- Thread::configure: The target Thread object has been configured with invalid argument.
- Thread::configure: The target Thread object has been configured as executing user mode, but not been specified.
- Thread::setBasePrioriry: The specified prioriry is not in the proper prioriry range.
- Timer::wait: This member function is called when the scheduler is locked.
- Timer::setPeriodic: The specified period less than or equals to zero.
- Timer::~Timer(): deleting a timer while some threads are waiting on the timer.
- %p %d.%09d
- WeakLock::~WeakLock(): The target WeakLock object has been locked by any threads.
- WeakLock::Lock: The caller thread of this function is holding another WeakLock object.
- WeakLock::tryLock: The caller thread of this function is holding another WeakLock object.
- WeakLock::lock: This member function is called when the scheduler is locked.
- initial thread
- dummy thread
- (fmt null)
- (null)
- There are some threads waiting on destructing a MessageQueue.
- /proc/partitions
- %s(%d)
- ERROR>
- ../src/PMPI/construct_logical_partition.cc
- couldn't create /proc/partitions/<lpar>
- /proc/partitions/
- ../src/PMPI/destruct_logical_partition.cc
- couldn't namei "%s" to inode
- /vuart/
- ../src/PMPI/vuart.cc
- proc_num =
- proc_ids =
- =====================================================
- lv1_ioctl: not supported request
- %s(%d)
- _INFO>
- ../src/UX/utils/ELF64.cc
- ehdr_ident = %16c
- ehdr_type = %d, ehdr_machine = %d, ehdr_version = %d
- ehdr_entry = %p, ehdr_phoff = %d, ehdr_shoff = %d
- ehdr_flags = 0x%08x, ehdr_ehsize = %d, ehdr_phentsize = %d
- ehdr_phnum = %d, ehdr_shentsize = %d, ehdr_shnum = %d
- ehdr_shstrndx = %d
- [ Stack trace ]
- 0x%016x: 0x%016x
- 0x%016x
- SRR0 = 0x%016p SRR1 = 0x%016p
- r0 = 0x%016p
- r1 = 0x%016p
- r2 = 0x%016p
- r3 = 0x%016p
- r4 = 0x%016p
- r5 = 0x%016p
- r6 = 0x%016p
- r7 = 0x%016p
- r8 = 0x%016p
- r9 = 0x%016p
- r10 = 0x%016p
- r11 = 0x%016p
- r12 = 0x%016p
- r13 = 0x%016p
- r14 = 0x%016p
- r15 = 0x%016p
- r16 = 0x%016p
- r17 = 0x%016p
- r18 = 0x%016p
- r19 = 0x%016p
- r20 = 0x%016p
- r21 = 0x%016p
- r22 = 0x%016p
- r23 = 0x%016p
- r24 = 0x%016p
- r25 = 0x%016p
- r26 = 0x%016p
- r27 = 0x%016p
- r28 = 0x%016p
- r29 = 0x%016p
- r30 = 0x%016p
- r31 = 0x%016p
- LR = 0x%016p CTR = 0x%016p
- CR = 0x%08p XER = 0x%08p
- r0 = 0x%016p
- r2 = 0x%016p
- r4 = 0x%016p
- r6 = 0x%016p
- r8 = 0x%016p
- r10 = 0x%016p
- r12 = 0x%016p
- r14 = 0x%016p
- r16 = 0x%016p
- r18 = 0x%016p
- r20 = 0x%016p
- r22 = 0x%016p
- r24 = 0x%016p
- r26 = 0x%016p
- r28 = 0x%016p
- r30 = 0x%016p
- ../src/UX/Kernel/PThread.cc
- PThread::onStop(): cause = %d, info = %p
- CAUSE_TARGET_DELETION: %s
- CAUSE_TARGET_DELETION: %p
- PThread::onException(): this = %p
- [ Exception in user mode ]
- "%s" pid = %d
- [segmentation fault] (code = %p)
- [alignment violation] (code = %p)
- [program exception] (code = %p)
- [floating point exception] (code = %p)
- %s(%d)
- FATAL>
- !! unexpected exception !! (code = %p)
- DSISR = %p, DAR = %p
- pme.console.split
- %3d: proc = %8p
- , ppid = %d
- , ppid = -
- , flag = %p
- /std
- ../src/UX/Kernel/Process.cc
- cleanup: LEAK pid = %d(%d), vaddr = %p, kaddr = %p
- fail detachAddressSpace (multiple errors occured) (%d)
- terminateProcess(): ec = %d
- /std/pme_init
- image.bin
- ../src/UX/Kernel/UserProgramLoader.cc
- target file validation failed
- ../src/UX/SystemCalls/accept.cc
- something happens during wait()
- ../src/UX/SystemCalls/exec.cc
- couldn't prepare loader for exec user program... (%d)
- pid = %d, after cleanup static = %d
- couldn't cleanup AddressSpace (%d)
- ../src/UX/file_system/fs_core.cc
- coudn't create the root directory of UX file system
- unexpected: search_directory_entries result = %d
- proc
- ioif0
- net0
- hvlog0
- ../src/UX/Kernel/main.cc
- couldn't create the zero thread
- pme.profile.time
- pme.profile.counting
- couldn't start ux_file_system (%d)
- couldn't create the terminator process
- couldn't locate the initial user program
- couldn't open the initial user program file
- couldn't create the initial process
- couldn't prepare loader for the initial user program... (%d)
- couldn't load the initial user program... (%d)
- couldn't create the initial thread
- couldn't set up user stack
- couldn't get the entry point of the initial user program
- Someone terminated or interrupted me (%d)
- There should be leaked resources.
- mfs_root
- ../src/UX/file_system/mfs/mfs.cc
- invalid image file (invalid files_offset) ?
- invalid file_name_offset %d (or num_of_files, files_offset)
- invalid file_offset %d (or num_of_files, files_offset)
- %d: missing a terminating null of the last file name
- %d: file_offset doesn't match the end of the last file
- sys.load.image.in_rom
- ../src/UX/SystemCalls/open.cc
- unexpcted: open result = %d
- partitions
- vuart
- ../src/UX/socket/socket_pme_msg.cc
- something illegal happens during wait()
- ../src/UX/SystemCalls/wait.cc
- failed Process::sleep() (%d)
- <%p (v%p)> ->
- [%p (v%p)] ->
- <%p, (%p, %p), ^%p> ->
- [%p, (%p, %p), ^%p] ->
- ../src/UX/utils/region_manager.cc
- couldn't allocate first_free_region...
- couldn't allocate first_free_region_p...
- ../src/UX/Kernel/process_address_space.cc
- mismatch. %p <=> %p, %p <=> %p
- console
- ../src/UX/file_system/console/stdlc.cc
- ../src/UX/file_system/vuart/vuart_file.cc
- unexpected: pmpi_read_virtual_uart result = %d
- unexpected: pmpi_write_virtual_uart result = %d
- ../src/UX/file_system/vuart/sc_vuart_file.cc
- new syscon protcol is not supported
- ../src/UX/file_system/cp/cp_file.cc
- lv1 stockpile: total =
- , used =
- , residual =
- lv1 heap
- , unused =
- pme stockpile: total =
- pme heap: managed =
- proc num =
- ==========
- pid =
- name =
- static pages =
- dynamic pages =
- mmap pages =
- dynamic pages(max) =
- mmap pages(max) =
- couldn't close the device
- ../src/UX/Kernel/storage_device.cc
- pmi_storage_send_device_command result = %d
- resource shortage
- unexpected: wait_for_my_turn() wakeup_status = %d
- unexpected: lv1_result = %d
- unexpected: wait_for_request_completed() wakeup_status = %d
- pmi_storage_write result = %d
- pmi_storage_read result = %d
- ../src/UX/Kernel/storage_region.cc
- device_status = %x
- ../src/UX/Kernel/interrupt_service_storage.cc
- detected a flooding of storage events...
- ../src/UX/file_system/lv1_storage/storage_region_file.cc
- unexpected: read_region() region_result = %d
- unexpected: write_region() region_result = %d
- ../src/UX/file_system/lv1_storage/storage_ioctl_file.cc
- unexpected: write() result = %d
- ../src/UX/file_system/lv1_storage/storage_detector_file.cc
- flash_num
- sd_detector
- rflash1
- eflash1
- rflash0
- eflash0
- rvflash0
- evflash0
- rflash_lx
- rflash_lxp
- local_sys0
- rbd0
- encdec0
- %08x: %016lx
- %016lx
- %016lx
- ../src/UX/file_system/lv1_storage/fat_fs/fat_fs.cc
- FAT is broken?
- bad cluster (%ld)
- cluster chain: 0x%lx(%ld)
- -> 0x%lx(%ld)
- bad cluster
- -> 0x%lx(%ld)
- ../src/UX/file_system/lv1_network/lv1_net_file.cc
- unexpected: pmi_net_set_hardware_info result = %d
- unexpected: pmi_net_set_eurus_firmware_buffer result = %d
- ID to priority
- ID to ordered ID
- priority to masking pattern
- priority %d -> %p
- ordered ID to masking pattern
- ordered id %d -> %p
- ordered ID to ID
- ordered id %d -> %d
- 0123456789abcdef
- 0123456789ABCDEF
- ../../src/UX/selective/secure/certified_file.cc
- This is not certified_file
- CF version mismatch
- CF category mismatch
- incorrect ext_header_size
- incorrect file_offset
- incorrect file_size
- ../../src/UX/selective/secure/self64_file.cc
- self64_file: validation of certified_file failed (%d)
- sys.lv1console.mode
- old syscon mode is obsoluted.
- ABEND: assertion failed:
- ????????????????
- ABEND:
- LOG
- too many hdec handlers
- msr:
- srr0:
- srr1:
- dar:
- dsisr:
- frame#
- CONFIGURATION ERROR:
- logger@
- buffer address:
- start pointer:
- end pointer:
- sys.lv1log.size
- loader parameter full (
- sys.cellos.flags
- sys.platform.mode
- sys.mmio.map_allow
- mu.1.size
- be.0.ioif1.addr
- be.0.bp_base
- , piu
- , last
- heap #
- last remainder:
- Queue #
- bytes)
- Cache #
- Releasable
- Block @
- , 0x
- (=2^
- bytes
- Bin #
- unsorted
- bytes
- large
- buddy_allocator@
- free list:
- 2^
- free block bitmap:
- [stockpile@
- budget@
- residual =
- used =
- buffer =
- sys.lv0.address
- sys.lv0.size
- sys.lv0.revision
- sys.lv0.version
- sys.lv1.ahcr
- Total memory:
- Lv-0 size:
- Heap consumption (Peak):
- Peak at:
- WARNING: out of memory -
- FATAL: no reserved memory...
- remaining reserved memory =
- lv1.ram.enable
- lv1.ram.ppe_ragid
- lv1.ram.spe_ragid
- lv1.ram.mic_tm_threshold_0
- lv1.ram.mic_tm_threshold_1
- lv1.ram.ioc_ioif0_quethshld
- lv1.ram.ioc_ioif1_quethshld
- lv1.ram.tkm_mbar
- lv1.ram.tkm_ioif0_ar
- lv1.ram.tkm_ioif1_ar
- lv1.ram.tkm_pr
- lv1.ram.tkm_cr
- lv1.ram.biu_modesetup1
- lv1.ram.biu_modesetup2
- be.0.spu.faultbm
- spurious interrupt: pu_thread #
- unit:
- interrupt:
- I/O exception:
- source lv1_runtime.tcl
- PANIC: conflicting interface number:
- GOPI#
- invalid GOPI number
- a conflict is detected
- revision:
- date:
- hash_table_base:
- node_count =
- construction_status =
- bucket_array_count =
- chain = {
- reversed_hash =
- link =
- rc =
- bucket_array[
- (rc =
- ) =
- memory leak in heap for thread #
- is detected.
- managed memory:
- leak:
- memory leak in stockpile for node #
- is detected.
- memory_shortage
- segment_association@
- peer =
- , invalidation_count =
- WARNING: PTE collision
- existing=
- inserted=
- WARNING: PTE collision(secondary)
- existing=
- v:
- e0:
- e1:
- ioaddr:
- a:
- ioid:
- sys.pci.share
- sys.lv1.iofaultmsg
- : read 0x
- : write 0x
- pme.memory.size
- pme.memory.size is not a multiple of 4KB
- WARNING: "enable_fast_get_execution_time" is deprecated
- LPAR#
- , PC:
- be.0.fir.ras_ee
- be.0.fir.l2_em
- be.0.fir.l2_ee
- be.0.fir.biu_em
- be.0.fir.biu_ee
- be.0.fir.ciu_em
- be.0.fir.ciu_ee
- be.0.fir.mic_f0
- be.0.fir.mic_f1
- be.0.fir.ioc_em
- be.0.fir.ioc_ee
- be.0.fir.spu0_em
- be.0.fir.spu0_ee
- sys.lv1.be_ras
- *** dump spu
- fir regs ***
- spu_fir(0x
- spu_fir_error_mask(0x
- spu_fir_checkstop_enable(0x
- *** [DETECT] unit: spu
- *** [DETECT] unit: l2 ***
- l2_fir(0x
- *** dump global fir regs ***
- ras_checkstop_fir(0x
- ras_recoverable_fir(0x
- ras_fir_enable_mask(0x
- ras_lerr_counter_stat(0x
- *** [DETECT HW Error] unit: global fir, cause: checkstop ***
- *** [DETECT HW Error] unit: global fir, cause: recoverable ***
- *** dump ioc fir regs ***
- ioc_fir(0x
- ioc_fir_error_mask(0x
- ioc_fir_checkstop_enable(0x
- bic_if0thr(0x
- bic_if1thr(0x
- bic_if0ccnt(0x
- bic_if1ccnt(0x
- *** [DETECT] unit: ioc ***
- bic_if0rcnt(0x
- bic_if1rcnt(0x
- *** dump mic fir regs ***
- mic_fir0(0x
- mic_fir1(0x
- *** [DETECT] unit: mic ***
- *** dump ciu fir regs ***
- ciu_fir(0x
- ciu_fir_error_mask(0x
- ciu_fir_checkstop_enable(0x
- *** [DETECT] unit: ciu ***
- *** dump biu fir regs ***
- biu_fir(0x
- biu_fir_error_mask(0x
- biu_fir_checkstop_enable(0x
- *** [DETECT] unit: biu ***
- *** dump l2 fir regs ***
- l2_fir_error_mask(0x
- l2_fir_checkstop_enable(0x
- l2_mode_setup1(0x
- HVL
- sys.hvlog.size
- SPE hang is detected: GUID
- UNKNOWN
- , NPC
- construction of SPU management VPU failed
- pmi_set_guest_os_mode(): already called
- pmi_set_guest_os_mode(): wrong gos_mode
- sys.lv1.dump_mmio
- PANIC: Can't get loader parameter =
- sys.flash.fmt
- sys.tmp_storage.size
- spider.gbe0.macaddr.1
- spider.gbe0.macaddr.2
- spider.gbe0.macaddr.3
- sys.debug.device
- rsx.rdcy.3
- rsx.rdcy.4
- rsx.rdcy.5
- rsx.rdcy.6
- rsx.rdcy.7
- rsx.rdcy.8
- sys.lv1.iosysenable
- ios.net.eurus.lpar
- sys.hw.config_version
- sys.hw.model_emulate
- be.0.nclk
- be.0.ioif0.addr
- lv1.heap.check
- [ WARNIG ]
- The allocation size from the heap (
- ) exceeds
- bytes: 0x
- [lp=
- lc.allow.large_id
- [lc=
- ,lp=
- sys.lc.polling.time
- sys.dbgcard.dgbe
- physical_console_0
- hypervisor_console
- EIC driver initialization failed
- FAIL: construction of a SPU objs
- hv_write_file_offset
- hv_read_file_offset
- hypervisor_runtime: file size =
- ux_get_file_size
- FAIL: Loader parameter 'be.0.spu.faultbm' is required.
- sys.cellos.spu.configure
- FAIL: Lv-1 does not support system SPEs more than 2.
- =(unit_id=
- ,resv_id=
- ,normal
- ,system
- PUUUU
- TUUUU
- XUUUU
- \UUUU
- p`P@
- 13zs
- lock_dma_region_critical
- sys.lv1.iosys.network
- sys.hw.config
- sys.hw.model_emulate
- $,0BH`l
- virtual int cellos::iosys::storage::storage_device::put_ioptes(cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t)
- virtual int cellos::iosys::storage::storage_device::put_ioptes(cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t)
- virtual int cellos::iosys::storage::storage_device::put_ioptes(cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t)
- virtual int cellos::iosys::storage::storage_device::put_ioptes(cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t, cellos::uint64_t)
- int cellos::iosys::storage::storage_device::confirm_close_common(cellos::uint64_t)
- EdecXTS_XorWithMask
- cellos::iosys::storage::storage_device* initialize_starship()
- 0123456789abcdefghijklmnopqrstuvwxyz
- 0000000
- ios.net.eurus.lpar
- 0123456789abcdef
- Cell OS SDK2.4.3 000
- Copyright 2008 Sony Computer Entertainment Inc.
- release build: r34661 2008_09_01_143000
- 34102
- Mon Sep 1 15:05:17 JST 2008
- \unknown
- Pfffffffg
- 7)p
- Pdev
- 5laid
- 0.8.2
- iw|c
- iw|c
- iw|c
- iw|c
- iw|c
- ADms]
- ADms]
- iw|c
- iw|c
- iw|c
- iw|c
- Plaid
- Plv1
- iso_enbl
- P`R+S
- P`R+S
- 0123456789abcdef
- !"#$()*+,01234
- ***************************************************************************************
- Can't get loader parameter =
- be.0.spu.faultbm
- 000000
- be..lpm.priv
- be.0.lpm.lpar
- be.0.lpm.priv
- *************************************************************
- 0pme.memory.size = 2834432
- sys.hvlog.size=100
- sys.lv1.iosys.storage = 1
- sys.lv1.iosys.pci.retry = 0
- sys.lv1.iosys.pci.d.thread = 0
- sys.lv1.iosys.errorhandler = 1
- sys.lv1.iosys.pciex = 0
- lv1.heap.afill = 0
- lv1.heap.rfill = 0
- sys.lv1console.mode = 0
- sys.lv1.emuioif0irq = 0
- sys.lv1.rsxenable = 3
- sys.lv1.rsxdebug = 0
- sys.lv1.be_ras = 0
- sys.lv1.iofaultmsg = 0
- sys.mmio.map_allow = 0
- sys.pci.share = 0
- sys.lc.polling.time = 500
- be.0.fir.ras_ee = 0xffffffff
- be.0.fir.l2_em = 0x0
- be.0.fir.l2_ee = 0xeff81
- be.0.fir.biu_em = 0x0
- be.0.fir.biu_ee = 0xff
- be.0.fir.ciu_em = 0x0
- be.0.fir.ciu_ee = 0x3fe0000000000000
- be.0.fir.mic_f0 = 0x0000fd7e00000000
- be.0.fir.mic_f1 = 0x0000028000000000
- be.0.fir.ioc_em = 0x0
- be.0.fir.ioc_ee = 0x70fb0fb03f03f0f
- be.0.fir.spu0_em = 0x1bf7ff
- be.0.fir.spu0_ee = 0x0
- be.0.fir.spu1_em = 0x1bf7ff
- be.0.fir.spu1_ee = 0x0
- be.0.fir.spu2_em = 0x1bf7ff
- be.0.fir.spu2_ee = 0x0
- be.0.fir.spu3_em = 0x1bf7ff
- be.0.fir.spu3_ee = 0x0
- be.0.fir.spu4_em = 0x1bf7ff
- be.0.fir.spu4_ee = 0x0
- be.0.fir.spu5_em = 0x1bf7ff
- be.0.fir.spu5_ee = 0x0
- be.0.fir.spu6_em = 0x1bf7ff
- be.0.fir.spu6_ee = 0x0
- be.0.fir.spu7_em = 0x1bf7ff
- be.0.fir.spu7_ee = 0x0
- be.0.lpm.lpar = 2
- be.0.lpm.priv = 0x780301
- lv1.ram.enable = 1
- lv1.ram.spe_ragid = 2
- lv1.ram.tkm_cr = 0x000f73e0
- lv1.ram.tkm_mbar = 0x057d150e
- lv1.ram.tkm_ioif0_ar = 0x00fc79cb
- lv1.ram.tkm_ioif1_ar = 0
- lv1.ram.tkm_pr = 0x3ffffffff
- lv1.ram.mic_tm_threshold_0 = 0x86390c7000000000
- lv1.ram.mic_tm_threshold_1 = 0x86390c7000000000
- lv1.ram.ioc_ioif0_quethshld = 0x676700
- lv1.ram.ioc_ioif1_quethshld = 0
- lv1.ram.biu_modesetup1 = 0xf003c00000000000
- lv1.ram.biu_modesetup2 = 0x000003c020000500
- 33
- Thu Mar 13 08:05:23 2008
- rom mods 096_1
- g_rsx_version
- Rg_rsx_revoffset
- Sg_chip_hash
- Tg_fuse_select
- Ug_fuse_ex_rev_offset
- Vg_cp_dram
- Wg_cp_mclkt
- Xg_cp_gv
- Yg_cp_vid
- Zg_cp_pt
- [g_cp_svop_enable
- \g_cp_svop
- ]g_cp_svop2
- ^g_ft_dram
- _g_ft_mclkt
- `g_ft_gv
- ag_ft_vid
- bg_ft_pt
- cg_ft_svop_enable
- dg_ft_svop
- eg_ft_svop2
- fg_cp_rsx65_svop_enable
- gg_cp_rsx65_svop_sp
- hg_cp_rsx65_svop_dp
- ig_cp_rsx65_svop_pdp
- jg_ft_rsx65_svop_enable
- kg_ft_rsx65_svop_sp
- lg_ft_rsx65_svop_dp
- mg_ft_rsx65_svop_pdp
- ng_fuse_rsx65_svop_enable
- og_fuse_rsx65_svop_sp
- pg_fuse_rsx65_svop_dp
- qg_fuse_rsx65_svop_pdp
- rg_fuse_dram
- sg_fuse_mclkt
- tg_fuse_gv
- ug_fuse_vid
- vg_fuse_pt
- wg_fuse_vidbin
- xg_fuse_svop_enable
- yg_fuse_svop
- zg_fuse_svop2
- {g_chipid_rev
- |g_chipid_factory
- }g_chipid_lot
- ~g_chipid_wafer
- g_chipid_wafer_x
- g_chipid_wafer_y
- g_chipid_ds_line
- g_chipid_ds_rev
- g_chipid_ds_dut
- g_chipid_revoffset
- g_ioif_trim
- g_chipid_process
- g_eeprom_val0
- g_eeprom_val1
- g_eeprom_val2
- g_eeprom_val3
- g_eeprom_val4
- g_eeprom_val5
- g_eeprom_val6
- g_eeprom_val7
- g_eeprom_val8
- g_eeprom_val9
- g_eeprom_val10
- g_eeprom_val11
- g_eeprom_val12
- g_mpll_coeff
- g_nvpll_coeff
- g_loaded
- g_zero
- g_fs
- g_cml_clk
- g_mpll_first_time
- g_factory
- Qrom_post_2007_05_10_rsx65
- initalize_variables
- force_rsx65_fuse
- rsx65_fuse_pt_override
- rsx65_fuse_dram_override
- rsx65_fuse_factory_override
- undefined_rsx_process
- default_mpll_coefficent
- default_nvpll_coefficent
- no_chip_specific_setting_found
- post_finished
- svop_rsx90
- emaa_3
- emaa_2
- emaa_in_fuses
- rsx65_svop
- nvclk_program_start_rsx90
- nvclk_program_start_rsx65
- mpll_program_start_rsx90
- dll_throttling_sequence
- mpll_program_finish
- mpll_program_start_rsx65
- dll_throttling_sequence
- mpll_program_finish_rsx65
- cml_clk_9_1ma
- cml_clk_default
- mclkt_240ohm
- rsx65_cml_clk
- vml_clk_setting
- rsx65_cml_clk_a02
- vml_clk_setting
- rsx90_dll_reset
- ref_delay_enable
- rsx65_dll_reset
- !ref_delay_enable
- "rsx65_a02_dll_reset
- #ref_delay_enable
- $fb_a0x_hybrid_cl1464312_20060204
- %fb_b01_sne_tsb_vid12_cl1550434_mods084_6
- &fb_b01_sne_tsb_vid12_end
- 'fb_b01_sne_vid3_cl1550434_mods084_6
- (fb_b01_sne_vid3_end
- )fb_b01_tsb_vid3_cl1550434_mods084_6
- *fb_b01_tsb_vid3_end
- +fb_b03_sne_tsb_vid123_samsung_cl1550434_mods084_6
- ,fb_b03_sne_tsb_vid123_samsung_end
- -fb_b03_sne_tsb_vid123_infineon_cl1550434_mods084_6
- .fb_b03_sne_tsb_vid123_infineon_end
- /fb_b01_fujitsu_vid123_samsung_cl1625201_mods_084_7
- 0fb_b01_fujitsu_vid123_samsung_end
- 1fb_b01_fujitsu_vid123_inf_cl1625201_mods_084_7
- 2fb_b01_fujitsu_vid123_inf_end
- 3fb_b05_b07_sony_vid123_sam_cl1660973_mods_086_1
- 4fb_b05_b07_sony_vid123_sam_cl1660973_mods_086_1_end
- 5fb_b05_b07_sony_vid123_inf_cl1660973_mods_086_1
- 6fb_b05_b07_sony_vid123_inf_cl1660973_mods_086_1_end
- 7fb_b068_tsb_vid123_samsung_80nm_mods_092_2
- 8fb_b068_tsby_vid123_samsung_80nm_mods_092_2_end
- 9fb_b07_sne_vid123_qimonda_90nm_2_0v_mods092_2
- :fb_b07_sne_vid123_qimonda_90nm_2_0v_mods092_2_end
- ;fb_b068_tsb_vid123_qimonda_90nm_2_0v_mods_092_4
- <fb_b068_tsb_vid123_qimonda_90nm_2_0v_mods_092_4_end
- =fb_rsx65_a01_qimonda
- >fb_b068_tsb_vid123_qimonda_90nm_2_0v_mods_092_4
- ?fb_rsx65_a01_done
- @fb_rsx65_a01_samsung
- Afb_b068_tsb_vid123_samsung_80nm
- Bfb_rsx65_a01_done
- Cfb_rsx65_a02_tsb_samsung
- Dfb_rsx65_a02_done
- Efb_rsx65_a02_tsb_qimonda
- Ffb_rsx65_a02_done
- Gfb_rsx65_a02_sne_samsung
- Hfb_rsx65_a02_done
- Ifb_rsx65_a02_sne_qimonda
- Jfb_rsx65_a02_done
- Kfb_rsx65_a02_tsb_hynix
- Lfb_rsx65_a02_done
- Mfb_rsx65_a03_tsb_hynix
- Nfb_rsx65_a02_done
- *********************************************************************************************
- pme_init
- sysmgr_ss.fself
- pme_init.conf
- ss_init.fself
- updater_frontend.fself
- ss_server1.fself
- ss_server2.fself
- ss_server3.fself
- ss_sc_init_pu.fself
- factory_data_mngr_server.fself
- *********************************************************************************************
- /dev/sc3
- opening %s failed
- pme_user::sc_rtc::get_rtc failed:
- ret = 0x%0x2
- pme_init running...
- pme_init: configuration error
- parser::unget_char:
- already head of the buffer
- invalid parameter: "%c"
- parser::get_char: EOF
- get_char returns %d
- unget_char failed: ret = %d
- skip_whitespace returns %d
- pme_init: wait for child exits...
- waiting for child process failure
- (0x%llx, 0x%llx)
- wait failed:
- ret = %d, errno = %d
- child exits:
- pid = %d, status = %d
- pme_init: all children exited, exiting...
- In check_sync: get_word failed: ret = %d
- sync
- nosync
- In get_function: get_word failed: ret = %d
- In process_line: get_function failed:
- In process_line: get_path failed:
- In process_line: check_sync failed:
- In process_line: execute command failed:
- timeout, system initialization failure
- (0x%llx)
- process synchronization failure
- booting %s...
- get_child_status failed
- failed
- pme_init: initialization failure
- ready
- couldn't exec %s, skip it
- process execution failure
- exiting... (pid: %d)
- process execution failure
- fork failed: ret = %d, errno = %d
- parser::finalize: not initialized
- parser::initialized: already initialized
- pme_init.conf
- no %s file
- open failed:
- open succeeded
- lseek failed:
- malloc failed
- read failed:
- read returns %d, not %d
- close failed:
- errno = %d
- configuration skipped
- parser::initialize failed: ret = %d
- process_line returns
- parser::finalize failed
- boot
- syscon write data:
- command write failed. (%d, %d)
- read failed header. (%d, %d)
- syscon read data:
- read failed body. (%d, %d)
- %04x: %08x
- %08x
- %08x
- map_pages failed: this = %p, area_pages = %d
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- ss_init
- clock
- ******************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .symtab
- .strtab
- .shstrtab
- .text
- .rodata
- .data
- .opd
- .got
- .bss
- .comment
- /home/tetsu/build_sdk/2008_09_01_143000/sys/trunk/policy_modules/../dinkumware/dinkum-pu/source/sys/pme/crt0.S
- main.cc
- _ZZ15get_print_levelvE16have_print_level
- _ZZ15get_print_levelvE11print_level
- parser.cc
- _ZZ4bootPKcbE18have_timeout_value
- _ZZ4bootPKcbE7timeout
- ss_init_repository.cc
- time_base.cc
- create_repository_node.cc
- get_repository_node_value.cc
- remove_repository_node.cc
- remote_file_access.cc
- power_down.cc
- sc_syspm.cc
- sc_rtc.cc
- sc_nvs.cc
- sc_basic_read_write.cc
- sc_message.cc
- lib_utils.cc
- /home/tetsu/build_sdk/2008_09_01_143000/sys/trunk/policy_modules/../dinkumware/dinkum-pu/source/memcpy.S
- strncmp.c
- malloc.c
- segment_holding
- .segment_holding
- mparams
- init_top
- .init_top
- _gm_
- init_mparams
- .init_mparams
- sys_trim
- .sys_trim
- memset.c
- crt1.cc
- getpid.cc
- fork.cc
- execv.cc
- _exit.cc
- sbrk.cc
- open.cc
- close.cc
- read.cc
- write.cc
- lseek.cc
- pme_memalign.cc
- usleep.cc
- printf.c
- vprintf.c
- printf_fn
- .printf_fn
- sys_printf_impl.c
- modulo10
- .modulo10
- output_padding_char
- .output_padding_char
- output_precision_char
- .output_precision_char
- output_prefix_str
- .output_prefix_str
- output_buf_str
- .output_buf_str
- abort.c
- exit.c
- fwrite.c
- memchr.c
- strlen.c
- xexit.c
- xfwprep.c
- brk.cc
- atexit.c
- _Atcount
- _Nats
- _Atfuns
- _Atcount0
- _Atdata
- fflush.c
- xstream_default_bufsiz.c
- xfiles.c
- errno.c
- wait.cc
- lib_config.cc
- ._ZN6parser14parse_and_bootEv
- .write
- .sbrk
- _ZN6parser10check_syncEPb
- _ZN8pme_user11memory_areaD1Ev
- printf
- ._ZN6parserC1Ev
- ._ZN8pme_user6sc_rtc7get_rtcEiPj
- _ZN6parserD1Ev
- _Fwprep
- ._ZN8pme_user19sc_basic_read_write14receive_resultEiPhm
- _ZN8pme_user19sc_basic_read_write12send_commandEihPhmmt
- _ZN6parser8get_charERi
- ._exit
- ._ZN8pme_user11memory_areaC1Em
- func_list
- _ZN8pme_user6sc_nvs9read_dataEihhhPh
- ._ZN6parser12is_delimiterEi
- _Stdout
- _ZN8pme_user19sc_basic_read_write14receive_resultEiPhm
- usleep
- _ZN6parser12is_delimiterEi
- getpid
- _Z4bootPKcb
- _unmap_pages
- ._initialize
- _ZN2ss18ss_init_repository11create_nodeEiPPcb
- .__call_functions_registered_with_atexit
- memcpy
- .brk
- __DTOR_END__
- _stream_default_bufsiz
- ._ZN6parser8get_pathEPcm
- ._ZN6parser10initializeEv
- _ZN8pme_user9dump_dataEPhl
- malloc
- _Z16get_child_statusRKmS0_RmS1_RKj
- ._sys_vprintf
- .memchr
- _ZN8pme_user6sc_rtc7get_rtcEiPj
- ._ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_crt1.cc_00000000_48DEDD419clear_bssEv
- .memset
- _ZN6parser8get_wordEPcm
- .vprintf
- ._ZN6parser8finalizeEv
- _ZN2ss18ss_init_repository8arg2randEiPPc
- _ZN6parserC1Ev
- .printf
- .memcpy
- fflush
- _map_pages
- lseek
- .fork
- .usleep
- _ZN6parser10unget_charERKi
- _Exit
- _ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_crt1.cc_00000000_48DEDD4110call_dtorsEv
- abort
- ._ZN2ss18ss_init_repository11create_nodeEiPPcb
- .exit
- _ZNK8pme_user10sc_message12message_sizeEv
- _ZN6parser8finalizeEv
- .end_of_signal_handling
- .get_time_base_frequency
- ._ZN6parser8get_charERi
- _ZNK8pme_user17sc_message_header18calculate_checksumEv
- ._Fwprep
- ._ZN2ss18ss_init_repository14get_node_valueERKmS2_RmS3_RKj
- write
- _Stdin
- .create_repository_node
- vprintf
- .abort
- get_remote_file_name
- .getpid
- end_of_signal_handling
- .get_remote_file_name
- __CTOR_LIST__
- ._ZNK8pme_user17sc_message_header18calculate_checksumEv
- ._ZN6parser15skip_whitespaceEv
- memchr
- ._ZN6parser12get_functionEPPF11ss_status_tPKcbE
- _start
- __end
- ._Z11fatal_errorh
- _Z15get_print_levelv
- read
- strncmp
- .lseek
- _ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_sbrk.cc_00000000_9F172CE610mapped_endE
- .malloc
- .remove_repository_node
- get_repository_node_value
- _Errno
- ._start
- ._ZN2ss18ss_init_repository8arg2randEiPPc
- fork
- execv
- sbrk
- ._ZN8pme_user11memory_areaD1Ev
- _ZN6parser8get_pathEPcm
- _Z11fatal_errorh
- .read
- ._ZN6parser8get_wordEPcm
- ._ZN6parser12process_lineEv
- __bss_start
- _ZN6parser15skip_whitespaceEv
- memset
- _sys_vprintf
- main
- .free
- _ZN6parser12get_functionEPPF11ss_status_tPKcbE
- _ZN6parser14parse_and_bootEv
- ._Z15get_print_levelv
- _ZN6parser12process_lineEv
- _ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_sbrk.cc_00000000_9F172CE610latest_endE
- .execv
- get_time_base_frequency
- .main
- .strncmp
- __CTOR_END__
- ._ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_crt1.cc_00000000_48DEDD4110call_ctorsEv
- _FILE_P_Head
- __DTOR_LIST__
- _ZN2ss18ss_init_repository14get_node_valueERKmS2_RmS3_RKj
- ._ZN6parserD1Ev
- remove_repository_node
- ._Z16get_child_statusRKmS0_RmS1_RKj
- .close
- _Stderr
- ._ZN6parser10unget_charERKi
- _ZN8pme_user6sc_nvs10write_dataEihhhPh
- fwrite
- _ZN6parser10initializeEv
- ._ZN6parser10check_syncEPb
- _edata
- .time_base
- ._ZN6parser12skip_commentEv
- _end
- .fwrite
- _ZN6parser12skip_commentEv
- ._unmap_pages
- create_repository_node
- .power_down
- ._ZN8pme_user8sc_syspm15set_wake_sourceEij
- ._ZN8pme_user9dump_dataEPhl
- exit
- _ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_crt1.cc_00000000_48DEDD419clear_bssEv
- .strlen
- ._ZN8pme_user6sc_nvs9read_dataEihhhPh
- .get_repository_node_value
- _ZN8pme_user8sc_syspm15set_wake_sourceEij
- time_base
- .fflush
- _ZN8pme_user11memory_areaC1Em
- _exit
- strlen
- open
- .open
- _initialize
- ._ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_crt1.cc_00000000_48DEDD4110call_dtorsEv
- ._Exit
- _ZN8pme_user10lib_config5debugE
- _ZN140_GLOBAL__N__home_tetsu_build_sdk_2008_09_01_143000_sys_trunk_policy_modules_.._dinkumware_dinkum_pu_source_sys_pme_crt1.cc_00000000_48DEDD4110call_ctorsEv
- ._ZN8pme_user6sc_nvs10write_dataEihhhPh
- ._ZNK8pme_user10sc_message12message_sizeEv
- power_down
- close
- ._Z4bootPKcb
- __call_functions_registered_with_atexit
- ._ZN8pme_user19sc_basic_read_write12send_commandEihPhmmt
- ._map_pages
- free
- ********************************************************************************************
- enable
- /dev/ioif0
- /dev/sc0
- /proc/partitions/%d/vuart/%d
- PS3_LPAR
- PS2_LPAR
- PS2_GX_LPAR
- PS2_SW_LPAR
- dprint_level
- param
- load
- rom1st
- config
- plat
- /rmt/av_setting.conf
- 3Y1
- bootup
- status
- sysmgr_e : failed to boot lpar %d
- poweroff!
- reboot!
- poweroff !
- reboot !
- sysmgr : altering lv0 or lv1 is detected.
- sysmgr : integrity check for lv0 and lv1 has passed.
- sysmgr : initial gos boot. avinit=%c
- DEFAULT.SPP
- /std
- sysmgr_if : notify lpar shutdown start to tsma
- sysmgr_if : notify lpar shutdown start to av set %d
- sysmgr_if : notify lpar boot done to tsma
- sysmgr_if : notify lpar boot done to av set
- sysmgr_if : notify lpar kill done to tsma
- sysmgr_if : notify lpar shutdown done to av set
- sysmgr_if : notify lpar shutdown done to tsma
- sysmgr_if : notify lpar boot start to tsma
- sysmgr_if : boot param from SC eeprom
- sysmgr_if : notify lpar boot start to av set %d
- sysmgr_if : notify system boot done to tsma
- sysmgr_if : notify system boot done to av set
- sysmgr_if : notify system shutdown start to tsma
- sysmgr_if : notify system shutdown start to av set %d
- sysmgr_if : notify lpar kill start to tsma
- sysmgr_if : shutdown current lpar refused (no active lpar)
- sysmgr_if : killing current lpar refused (no active lpar)
- lpar_event : fan policy %d. st=%d/id=%d/policy=%d/mode=%d/duty=%d
- lpar_event : fan policy %d. invalid id=%d
- lpar_event : * fan policy %d. %s no privilege
- lpar_event : factory_process_comp %d. st=%x comp=%04x(%04x)
- lpar_event : * factory_process_comp %d. %s no privilege
- lpar_event : rtc_alarm %d status=%x clock=%d
- lpar_event : * rtc_alarm %d. %s no privilege
- lpar_event : inter-lpar parameter length = %d
- lpar_event : * inter lpar parameter size over (%d > %d)
- lpar_event : boot parameter %d. param=%lx, st=%d
- lpar_event : * boot parameter %d. %s no privilege
- lpar_event : * receive unknown response. type=%d
- lpar_event : to lpar (sid=%d, size=%d)
- lpar_event : temperature : tzone=%d: temp:%d.%d
- lpar_event : send inter-lpar parameter: bytes=%d
- lpar_event : from lpar (sid=%d, size=%d)
- lpar_event : * failed to close socket %d
- lpar_event : * destruct virtual uart failed %d
- lpar_event : * construct virtual uart %d failed %d
- lpar_event : * vuart port %d open failed
- lpar_event : get_set_config domain=%d, command=%d
- lpar_event : * set config. %s no privilege
- lpar_event : * control led. %s no privilege
- lpar_event : set_shop_demo_mode status=%d mode=%d
- lpar_event : * set_shop_demo_mode. %s no privilege
- lpar_event : request_system_event_log flag=%d, offset=%d
- lpar_event : * request_system_event_log. %s no privilege
- lpar_event : request_sc_version
- lpar_event : * request_sc_version. %s no privilege
- lpar_event : request_be_count
- lpar_event : * request_be_count. %s no privilege
- lpar_event : request_error_log offset=%d
- lpar_event : * request_error_log. %s no privilege
- lpar_event : * ring buzzer. %s no privilege
- lpar_event : set_next_operation %x
- lpar_event : * next operation. %s no privilege %d
- lpar_event : * next operation. %s boots %d no privilege
- lpar_event : * receive uart unknown operation. type=%x
- lparmgr : boot failed reason = %d
- lparmgr : give up booting %s
- lparmgr : * initialize default repository failed %d
- rgntotal
- rm_addr
- rm_size
- channel
- bitmap
- spun
- spursv
- spursvn
- boot
- parameter
- vir_uart
- port
- sysmgr
- avset
- lparmgr : * construct_logical_pu failed = %x
- lparmgr : boot parameter = %08x_%08x
- lparmgr : * construct repositories failed
- eurus
- lpar
- iso_enbl
- lparmgr : * activate logical pu failed %x
- lparmgr : boot completed
- ------------------------------------------
- lparmgr : booting %s partition...
- lparmgr : ability=%x
- lparmgr : * construct logical parition failed %x
- lparmgr : * allocate memory failed %x
- lparmgr : delete_ata_key success
- lparmgr : * delete_ata_key failed (0x%x)
- lparmgr : set_ata_key success
- lparmgr : * set_ata_key failed (0x%x)
- lparmgr : setup bd drive...
- done
- lparmgr : load guestos...
- lparmgr : * load guest os image failed %d
- lparmgr : * registering shutdown signal handler failed %x
- lparmgr : skip ata_key
- sysmgr : * get contents size failed. status=%d, prof=%s/file=%s/type=%d
- sysmgr : * get contents failed. status=%d, prof=%s/file=%s/type=%d
- SCE_CELLOS_SYSTEM_MGR
- SCE_CELLOS_SYSTEM_MGR_PS2
- SCE_CELLOS_SYSTEM_MGR_PS2_GX
- SCE_CELLOS_SYSTEM_MGR_PS2_SW
- SCE_CELLOS_SYSTEM_MGR_LINUX
- SCE_CELLOS_PME
- cellos memory size = %ldB
- LINUX_LPAR
- lparmgr : * construct event receive port failed %x
- lparmgr : * get lpar parameter size failed. status=%d, prof=%s
- lparmgr : * get lpar parameter failed . status=%d, prof=%s
- lparmgr : * lpar parameter size unmatch. buf_size=%d, acm_size=%d, using buf_size...
- lparmgr : shutdown %s partition...
- lparmgr : * shutdown %s failed %x
- lparmgr : unload guestos...
- Failed to get_logical_partition_info for %s. status=%d
- lparmgr : destructing partition...
- Failed to destruct_logical_partition for %s. result=%d
- lparmgr : reset bd drive...
- retry
- reset bd drive failed %d
- lparmgr : kill %s partition... id=%d
- lparmgr : shutdown(kill) %s partition...
- lparmgr : * shutdown(kill) %s failed %x
- lparmgr : shutdown %s rejected (invalid lpar state %d)
- lparmgr : start shutdown partition. id=%d
- lparmgr : send shutdown command to %s
- lparmgr : start destructing partition. id=%d
- rgnn
- address
- linux_entry : auth drive success
- linux_entry : bd drive ready
- linux_entry : auth drive time-outed (0x%x)
- linux_entry : auth drive failed (0x%x)
- /rmt/%s.dat
- /dev/rflash_lx
- /proc/partitions/%d/mem
- linux_entry : * LPAR address space file couldn't be opened...
- linux_entry : * mmap failed: errno = %d
- linux_entry : copy_size != file_size
- boot_dat
- size
- lpar_entry : additional boot data %ld,%d
- laid
- create node: error status = %d
- ps2_entry : * power off pci bus failed.
- ps2_entry : * power on pci bus failed.
- remove node: error status = %d
- lpar_entry : * no scheduling table entry in spp file
- lpar_entry : * construct scheduling table failed %d
- -----
- lpar_entry : * scheduling slot table looking up failed %d
- slot %d:index=%d,name=%s,ts=%dus(%ld)
- lpar_entry : * set_scheduling_slot failed %d
- flash
- hw_config=%x_%x
- sysmgr.boot.ps2.1st
- sysmgr.boot.linux.1st
- sysmgr.debug.level
- /rmt/%s
- /std/%s
- asysspun
- sysmgr : number of system spus = %d
- ausrspun
- sysmgr : available number of spus for lpar = %d
- clock
- sysmgr : tb_frequency = %d
- config : total memory size = %d(%dMB)
- product
- mode
- sysmgr : in product mode.
- spursvsl
- sysmgr : spu condition info = %p
- /dev/net0
- /local_sys0/sys/internal/eurus_fw.bin
- eurus_fw.bin
- net_manager::reset_eurus failed(%d) flag=%d
- net_manager::read_firmware invaild jump command : command=0x%08x, new_data_size=%d current_offset=%d, data_offset=%d
- net_manager:: Error : eurus F/W download failed.
- net_manager::read_firmware invaild data : command=0x%08x, new_data_size=%d current_offset=%d, data_offset=%d
- net_manager::read_firmware data: %d, firm_offset: %d
- net_manager::put_firmware read firmware fails.
- net_manager::put_firmware ioctl (EURUS_FIRM) fails %d
- net_manager::open_firmware can't open file (FAT)
- net_manager::open_firmware open file (FAT)
- net_manager::open_firmware open file (COMPOSITE)
- net_manager::on_event_received ioctl (EURUS_STAT) failed.
- net_manager::on_event_received Error : eurus F/W download failed.
- net_manager::on_event_received firmware downloaded.
- update
- net_manager::start_firmware_download get_node_value failed. %d
- net_manager::start_firmware_download
- net_manager::initialize ...
- net_manager::initialize couldn't open the file %s. (%d)
- net_manager::initialize mac_addr=0x%016lx
- net_manager::initialize ioctl (NET_INIT) fails %d
- net_manager::initialize ... completed.
- 1.2.3
- gosldr : * inflateInit: %s
- gosldr : * read error ext os
- gosldr : * inflate: %s
- gosldr : * overflow: %d
- gosldr : * unknown error
- gosldr : * inflateEnd: %s
- gosldr : found valid gos image
- gosldr : * mmap failed: errno = %d
- gosldr : inflating gos image
- gosldr : load gos image completed
- /rmt/
- timer : expired
- timer : set alarm %d us
- str_manager : delete_ata_key success
- str_manager : * delete_ata_key failed (0x%x)
- str_manager : skip delete_ata_key
- str_manager : * read size error %d != %d
- str_manager : event=%llu, bus_id=%llu, dev_id=%llu, port=%lld, dev_type=%llx
- str_manager : * unknown event type (%d)
- /dev/rbd0
- /dev/sd_detector
- str_manager : * fatal error. can not open device file
- no response from syscon. waiting reply for transaction:
- %04x
- sc_manager : from syscon (reply=%x)
- sc_manager : to syscon (comm=%x)
- sc_manager : set_wake_source %x
- control_led : p=%x,s=%x result=%d
- control_led : b=%x,h=%x result=%d
- press : timer failed [%d]->[%d]
- sc_manager : * receive unknown packet from syscon. cmd id:%x
- sc_timer : invalid state [%d]
- sc_manager : %smask %d event
- sc_manager : read header error
- sc_manager : read body error
- header %d byte:
- %02x
- body %d byte:
- sc_manager : from syscon (event=%x size=%d)
- /dev/sc1
- sc_manager : fatal error. can not open syscon device file
- sc_manager : wake source : %x
- other os mode: wake source: %x &= ~%x
- sc_manager : set_wake_source %x->%x
- os switch: wake source: %x &= ~%x
- map_pages failed: this = %p, area_pages = %d
- syscon write data:
- command write failed. (%d, %d)
- shutdown handler invoked
- unknown shutdown interrupt %d
- /dev/hvlog0
- hvlog size error %d != %d
- system event id=0x%x, rtc=%d, size=%d [0x%lx 0x%lx 0x%lx 0x%lx]
- /dev/rflash_lxp
- ext_os : * failed to open other os region
- ext_os : * read header area failed
- cell_ext_os_area
- ext_os : * magic number invalid
- ext_os : * header version invalid
- ext_os : * read sysmgr area failed
- ext_os : * image size invalid
- clear boot flag for external os!
- IiGM
- invalid distance too far back
- invalid distance code
- invalid literal/length code
- incorrect header check
- unknown compression method
- invalid window size
- unknown header flags set
- header crc mismatch
- invalid block type
- invalid stored block lengths
- too many length or distance symbols
- invalid code lengths set
- invalid bit length repeat
- invalid literal/lengths set
- invalid distances set
- incorrect data check
- incorrect length check
- /dev/cp0
- sysmgr.conf
- max socket entries
- net_manager(ss)::initialize read_system_data mac_addr=0x%016lx status=%d
- net_manager(ss)::initialize read_system_data wlan_data1=0x%016lx wlan_data2=0x%016lx status=%d
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- ros0
- ros1
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- P`R S
- P`R S
- P`R S
- P`R S
- P`R+S
- P`R+S
- P`R+S
- P`R+S
- P`R+S
- P`R+S
- P`R'S
- P`R'S
- P`R'S
- P`R'S
- PS3_LPAR
- /dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- Cyt3.0
- Cyt3.1
- 8Cyt2.
- flash
- boot
- syscon
- pversion
- commlib
- debug
- level
- common
- printf
- enabled
- debug
- level
- param
- bank
- rvkprg
- rvkpkg
- UUUUU
- ******************************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- # configuration file for pme_init
- # notation:
- # boot name_of_executable sync/nosync
- # sample
- boot ss_init.fself sync
- boot sysmgr_ss.fself nosync
- boot pme_shell nosync
- ************************************************************************************
- ss sdk-2.4.3
- Mon Sep 1 16:10:50 JST 2008
- 3194
- 34114
- invalid ch->m_magic: 0x%lx
- invalid ch->m_version: 0x%lx
- invalid ch->m_category: 0x%lx
- invalid sh->m_version: 0x%llx
- In install_lv1_acl: arg is NULL
- SCE_CELLOS_SS_INIT_LV1_ACL
- secure_profile_loader_if::get_contents_size: returns SS_STATUS_NO_ENTRY
- install_lv1_acl succeeded
- configuration error (0x%llx)
- In install_lv1_acl: secure_profile_loader_if::get_contents_size failed: ret = %d
- install_lv1_acl failed
- resource shortage
- malloc failed
- internal error (0x%llx)
- secure_profile_loader_if::get_contents failed: ret = %d
- install_access_control_table failed: ret = %d
- couldn't exec %s
- process execution failure
- open %s failed:
- ret = %d, errno = %d
- reading executable failure
- (0x%llx, 0x%llx)
- read failed:
- reading executable failure (0x%llx)
- read %d / %d bytes
- close failed:
- path name too long: %s%s
- booting %s...
- status check failure (0x%llx)
- In boot_test_appliication: arg is NULL
- /rmt/
- skip it
- process execution failure
- In set_ss_laid: arg is NULL
- ss lpar id = 0x%llx
- LPAR initialization failure (0x%llx)
- In set_timeout: arg is NULL
- SPU_TIMEOUT = 0x%llx
- settle timeout failure (0x%llx)
- result = 0x%llx
- In get_prn_64: override 0x00
- In get_prn_64: PRN = 0x%llx
- In do_fix_bank: arg is NULL
- storage consistency check failure
- fix_bank::instance failed
- storage consistency check failure
- fix_bank::fix_bank_indicator failed
- fix_bank failed
- fix_bank succeeded
- In load_spm_policy: arg is NULL
- security_policy_manager_if::
- load_additional_policy:
- returns SS_STATUS_NO_MATCH
- load_spm_policy succeeded
- load_additional_policy failed:
- load_spm_policy failed
- In install_revoke_list: arg is NULL
- loader initialization failure
- revoke_list_manager::instance failed
- loader initialization failure (0x%llx)
- revoke_list_manager::
- install_revoke_list_to_lv0 failed:
- install_revoke_list failed
- install_revoke_list succeeded
- timeout, system initialization failure
- process synchronization failure
- ss_init: get_child_status:
- ss_init_repository::get_node_value failed:
- get_child_status failed
- ready
- couldn't exec %s, skip it
- exiting... (pid: %d)
- fork failed: ret = %d, errno = %d
- ss_init: configuration error (1)
- ss build date: %s
- ss revision: %s
- sys revision: %s
- ss_init: configuration error (2)
- ss_init: configuration error (3)
- ss_init: fatal error, exiting...
- ss_init: wait for child exits...
- ss_init: exiting...
- ss_server3.fself
- ss_sc_init_pu.fself
- ss_server2.fself
- ss_server1.fself
- factory_data_mngr_server.fself
- updater_frontend.fself
- test_app.fself
- /dev/sc3
- /rmt/ss_sysctl.txt
- common
- debug
- level
- update
- updatefe
- ss_init
- sc_proxy
- policy
- ac_cntl
- ploader
- gloader
- commlib
- sc_mngr
- sc_iso
- ii_mgr
- vtrm
- sec_rtc
- sb_mngr
- sb_iso
- app_info
- aim_iso
- fdm_iso
- stricv
- usbauth
- dispatch
- sc_test
- token
- printf
- enabled
- 0123456789abcdefghijklmnopqrstuvwxyz
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- package revoke bank : 0x%x
- program revoke bank : 0x%x
- os bank : 0x%x
- fix_bank::initialize_bank_repository()
- initialize_bank_repository()::Flash format version != 2. skipped.
- fix_bank::fix_bank_indicator_entity()
- fix_bank_indicator()::Flash format version != 1. skipped.
- get_composite_region_entry_by_name(%s) not found
- get_composite_region_entry_by_name(%s) failure
- [before]
- m_active_bank = 0x%llx
- m_current_bank = 0x%llx
- m_bank_size = 0x%llx
- [after]
- m_active_bank = 0x%llx
- m_current_bank = 0x%llx
- m_bank_size = 0x%llx
- SIGSPUTIMEOUT from revoke_list_loader is received
- SIGSPUERR from revoke_list_loader is received
- SIGSPUDMA from revoke_list_loader is received
- SIGSPUSTOP from revoke_list_loader is received
- trvk_prg
- trvk_prg0
- trvk_prg1
- m_active_bank = 0x%llx
- m_current_bank = 0x%llx
- m_live_size = 0x%llx
- /std/RL_FOR_PROGRAM.img
- map_file failure
- signal failed
- config manager initialize failure
- construct_logical_spu failure
- load_revoke_list_from_initial_storage failure
- size = %d
- m_magic = 0x%x
- m_version = 0x%x
- m_category = 0x%x
- m_file_offset = 0x%x
- m_file_size = 0x%x
- install_revoke_list failure
- install_revoke_list()'s status = 0x%x, stop_code = %d
- install_revoke_list() success
- install_revoke_list() failure
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- DEFAULT.SPP
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- timeout occured
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- syscon write data:
- command write failed. (%d, %d)
- read failed header. (%d, %d)
- syscon read data:
- read failed body. (%d, %d)
- %04x: %08x
- %08x
- %08x
- map_pages failed: this = %p, area_pages = %d
- /dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- param
- load
- rom1st
- laid
- clock
- common
- printf
- enabled
- debug
- level
- A`commlib
- debug
- level
- param
- bank
- rvkpkg
- rvkprg
- Cyt2.
- flash
- boot
- syscon
- pversion
- param
- bank
- rvkprg
- rvkpkg
- ss_init
- debug
- level
- ***************************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 3.4.1 (CELL 2.2.1, May 23 2005)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- *****************************************************************************************
- System update: SUCCESS
- System update: FAILURE
- updater_frontend: ebootrom not specified
- boot normaly
- [GET HARDWARE INFORMATION]
- get hardware information failure
- [GET IMAGE FILE]
- System update: Invalid file name
- Update image file name = %s
- increase pme memory budget failure = 0xll%x
- shutdown
- CORE_OS_PACKAGE.pkg
- RL_FOR_PROGRAM.img
- RL_FOR_PACKAGE.img
- NAND_UPDATE.pkg
- BDIT_FIRMWARE_PACKAGE.pkg
- BDPT_FIRMWARE_PACKAGE_301R.pkg
- BDPT_FIRMWARE_PACKAGE_302R.pkg
- BDPT_FIRMWARE_PACKAGE_303R.pkg
- BDPT_FIRMWARE_PACKAGE_304R.pkg
- sdk_version
- version.txt
- updater_frontend_if::check_ebootrom()
- CORE_OS_REGION (%s)not found in ebootrom
- REVOKE_LIST_FOR_PACKAGE (%s) not found in ebootrom
- trvk_pkg
- REVOKE_LIST_FOR_PROGRAM (%s) not found in ebootrom
- trvk_prg
- NAND_UPDATE_REGION (%s) not found in ebootrom
- nand_update
- BDIT_300R_FIRMWARE_REGION (%s)not found in ebootrom
- bdit_firmware
- BDPT_301R_FIRMWARE_REGION (%s)not found in ebootrom
- bdpt_301r_firmware
- BDPT_302R_FIRMWARE_REGION (%s)not found in ebootrom
- bdpt_302r_firmware
- BDPT_303R_FIRMWARE_REGION (%s)not found in ebootrom
- bdpt_303r_firmware
- BDPT_304R_FIRMWARE_REGION (%s)not found in ebootrom
- bdpt_304r_firmware
- polling_result()
- request_id = 0x%llx, node_type = 0x%d
- get_status() failure
- [VERIFY IMAGE FILE]
- [WRITE IMAGE FILE]
- |%3d%%]
- |%3d%%]
- polling_result() ret = %d
- updater_frontend_if::print_sdk_version()
- %s's entry
- m_offset = 0x%llx
- m_size = 0x%llx
- %s : %s
- updater_frontend_if::invoke_update_package(%d)
- target entry
- m_offset = 0x%llx
- m_size = 0x%llx
- %s.%02d
- invoke_update_package: check %s
- target file(%s) entry
- m_offset = 0x%llx
- m_size = 0x%llx
- updater_frontend_if::update_region(%d)
- updater_frontend_if::get_os_version()
- os_version =
- build_version =
- updater_frontend_if::update_ebootrom(%s)
- initialize os version area in SC NVS failure(%d)
- initialize os version area in SC NVS success
- update status flag get failure
- update status flag: 0x%x
- product mode flag get failure
- product mode flag: 0x%x
- /rmt/%s
- System update: Invalid image file
- file not found
- permission denied
- filename too long
- [INSPECT IMAGE FILE]
- System update: file read error
- System update: Invalid image file format
- System update: Image file read error
- System update: Invalid version file format. ignored.
- [UPDATE SYSTEM phase 1]
- System update: older revoke list skipped
- System update: update system data failure(%d)
- [UPDATE SYSTEM phase 1 done]
- [UPDATE SYSTEM phase 2]
- System update: Invalid version
- System update: update system software failure(%d)
- [UPDATE SYSTEM phase 2 done]
- [UPDATE SYSTEM phase 3]
- [UPDATE SYSTEM phase 3 done]
- [UPDATE SYSTEM phase 4]
- [UPDATE SYSTEM phase 4 done]
- [UPDATE SYSTEM phase 5]
- **** Now updating critical part. ****
- **** Don't turn off the power while processing, or system will be crashed ****
- System update: BDIT drive not found. skipped
- System update: BDPT 301R drive not found. skipped
- System update: BDPT 302R drive not found. skipped
- System update: BDPT 303R drive not found. skipped
- System update: BDPT 304R drive not found. skipped
- **** Now updating critical part done. ****
- [UPDATE SYSTEM phase 5 done]
- System update: update system information failure(%d)
- settle os version area in SC NVS failure(%d)
- settle os version area in SC NVS success
- settle to normal mode
- top_toc
- asecure_loader
- eEID
- cISD
- cCSD
- cvtrm
- lsp_update
- ros0
- ros1
- trvk_prg0
- trvk_prg1
- trvk_pkg0
- trvk_pkg1
- END_OF_REGION
- release:
- build:
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- read_cs_area():illegal parameter
- read_industry_area():illegal parameter
- 1.2.3
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- timeout occured
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- updatefedebug
- level
- common
- printf
- enabled
- debug
- level
- update
- request
- extract
- inspect
- /`Cyt2.
- flash
- boot
- syscon
- pversion
- commlib
- debug
- level
- ss_init
- debug
- level
- ***************************************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- *********************************************************************************************
- ss_init_if::notify_failure failed:
- ss_init_if::notify_ready failed:
- usb_dongle_authenticator::initialize
- usb_dongle_authenticator::verify_response
- given response body=
- %02x
- challenge body=
- dongle_id=%u
- dongle ID revoked.
- get_dongle_key error
- calc. response body=
- usb_dongle_authenticator::generate_challenge
- security_hardware_framework_if::get_random_number sanity check error : r=%d
- encrypted master key recover succeeded.
- encrypted master key recover failed -> use dummy key.
- user_token:m_magic = 0x%x
- user_token:m_format_version = 0x%x
- user_token:m_size = 0x%llx
- user_token:m_capability = 0x%llx
- user_token:m_expire_date = 0x%llx
- user_token:m_idps:
- 0x%02x
- user_token:m_attribute:
- user_token:attr:m_type = 0x%x
- user_token:attr:m_size = 0x%x
- user_token:attr:m_data:
- user_token:m_digest:
- user_token_manager::decrypt_user_token()
- invalid user token format.
- decrypt_and_verify() failure = 0x%x
- get_time() failure = 0x%x, status = 0x%llx.
- rtc value = 0x%llx, status = 0x%llx.
- user token has been expired.
- user_token_manager::encrypt_user_token()
- sign_and_decyrpt() failure = 0x%x
- spu_utoken_processor.self
- user_token_processor::SIGSPUMB caught(not disired)
- user_token_processor::SIGSPUTIMEOUT caught(not disired)
- user_token_processor::SIGSPUERR caught(not disired)
- user_token_processor::SIGSPUDMA caught(not disired)
- user_token_processor::SIGSPUMB msg = 0x%x
- user_token_processor::SIGSPUSTOP_SL received
- user_token_processor::status = 0x%x
- user_token_processor::stop_code = 0x%x
- user_token_processor::SIGSPUSTOP received
- user_token_processor::read_idps() read EID0 size failure(%d)
- user_token_processor::read_idps() EID0 size = %d
- user_token_processor::read_idps() malloc failure
- user_token_processor::read_idps() read EID0 failure(%d)
- user_token_processor::read_idps() EID0
- user_token_processor::read_idps() failure(%d)
- user_token_processor::create_command() failure(%d)
- user_token_processor::load_module() failure
- user_token_processor::request_loading_spu_module() failure
- user_token_processor::request_loading_spu_module() success
- update_manager::read failure
- update_manager::write verification failure
- update_manager::swap_bank(%d, 0x%llx)
- update_manager::swap_bank() swap_boot_bank() = %d
- update_manager::get_package_info(%d)
- version = 0x%llx
- update_manager::get_secure_product_mode()
- update_manager::get_sc_status(%d) failure
- update_manager::get_secure_product_mode() value = 0x%x
- update_manager::set_secure_product_mode(0x%x)
- current sc_version = 0x%x, sc_status = 0x%x
- new sc_version = 0x%x, sc_status = 0x%x
- update_manager::set_sc_status(%d) failure
- decompress_and_write_image()
- data_offset = 0x%llx, data_size = %u, comp_size = %u
- image_offset = 0x%llx, chunk_offset = 0x%llx
- 1.2.3
- deflateInit failure
- offset = 0x%llx, wsize = 0x%llx
- write_image()
- data_offset = 0x%llx, data_size = %u
- image_offset = 0x%llx, chunk_offset = 0x%llx
- real_offset = 0x%llx, align = 0x%llx
- update_manager::decompress_and_write_target()
- data_offset = 0x%llx, data_size = %u, comp_size = %u
- update_manager::write_target()
- data_offset = 0x%llx, data_size = %u
- filename = %s, file_loc = 0x%llx, file_size = 0x%llx
- verify_util::SHA-1 hash
- 0x%x
- update_manager::check_core_os_hash()
- in product mode, check is skipped.
- update_manager::check_core_os_hash() get_version_and_hash() failure
- update_manager::check_core_os_hash() SC not initialized. skipped integrity check.
- update_manager::check_core_os_hash() config_manager failure
- update_manager::check_core_os_hash() calc lv0 hash failure(%d)
- update_manager::check_core_os_hash() calc lv1 hash failure(%d)
- lv0 and lv1 have passed integrity check
- lv0 has been altered. integrity check failure.
- lv1 has been altered. integrity check failure.
- update_manager::read_revoke_list(%d)
- m_magic = 0x%x
- m_category = 0x%x
- m_file_offset = 0x%llx
- m_file_size = 0x%llx
- update_manager::initialize_revoke_list_info(%d)
- read_revoke_list() failure = %d
- calc hash of revoke list failure = %d
- verify_revoke_list() failure = %d
- set_version_and_hash_to_trm() failure = %d
- update_manager::applicable_version_info(%d)
- get_version_and_hash_to_trm() failure = %d
- get_applicable_version()::installed_version = 0x%llx
- get_applicable_version()::builtin_rvk_version = 0x%llx
- revoke list: operator = %u, operand = 0x%llx
- invalid version operator in revoke list = 0x%x
- applicable_version_info: lower = 0x%llx(%lld), upper = 0x%llx(%lld)
- update_manager::check_revoke_list_hash()
- update_manager::check_revoke_list_hash() get_version_and_hash() failure
- update_manager::check_revoke_list_hash() read revoke list failure
- update_manager::check_revoke_list_hash() calc hash failure
- revoke list %d have passed integrity check
- revoke list %d has been altered. integrity check failure.
- update_manager::check_revoke_list_all()
- revoke list for update package has been altered. integrity check failure.
- revoke list for program has been altered. integrity check failure.
- update_manager::check_size(%d, 0x%llx)
- update_manager::check_size() invalid parameters
- update_manager::check_size() invalid file image
- update_manager::check_size() file_size = 0x%llx
- update_manager::check_size() conf_mgr initialize failure
- bank_size = 0x%llx, body_size = 0x%llx, orig_file_size = 0x%llx
- update_manager::check_size() invalid bank size
- sc updater initialize failure.
- appropriate SC firmware revision(pkg:0x%llx, rom:0x%llx)
- SC firmware binary patch
- SC firmware revision is mismatched(pkg:0x%llx, rom:0x%llx)
- SC firmware binary patch failure = %d
- bd.detect_drive_type() : ret = %d, type = %d
- BD Drive not found.
- not fatal error in DEH/ARCADE.
- BD Drive is emergency mode in manufacturing phase (error).
- BD Drive is not emergency mode in manufacturing phase.
- BD Drive type is not 302R/304R on CEX. fatal error
- BD Drive type is 302R/304R on CEX. valid combination
- get BD firmware version failure = %d.
- set initial BD firmware version = 0x%llx
- set_version_and_hash_to_trm() failure.
- bd.disable_reqsense() : ret = %d
- BD Drive control failure.
- bd.enable_reqsense() : ret = %d
- drive_type = 0x%d, h_id = 0x%lld
- apprppriate drive type and firmware found
- firmware update failure
- firmware update done
- fatal error in DEX/CEX.
- raw image overlap check failure
- raw image overlap check success
- raw image with crypto
- raw image without crypto
- last chunk (%d) came, store version
- update_manager::set SBI flags = 0x%llx
- update_manager::bank size = %lld, data size = %lld
- update_manager::data is too large
- {status = 0x%x, flags = 0x%x}
- update_manager::calc_os_hash failure(%d, %s)
- update_manager::calc_os_hash no entry(%s)
- bank swap immediately.
- bank swap delayed.
- {status = 0x%x, flags = 0x%x, size = 0x%llx}
- update_manager::force update mode(flag is rewrited to REVOKE_CHECK_OFF | ALLOW_DOWN_VERSION.) = 0x%llx
- update_manager::update_package_tophalf() check_size() failure = %d
- update_manager::common_tophalf:: reques_id = 0x%llx
- update_manager::is_valid_access(0x%x, 0x%02x, 0x%llx)
- update_manager::is_valid_access() for TOOL/DEX/ARCADE or manufacturing phase
- update_manager::is_valid_access() for CEX
- update_manager::inspect_package_tophalf(0x%x, 0x%llx, 0x%x, 0x%llx, 0x%llx, 0x%x, 0x%x)
- No permission for inspect_package(%d)
- update_manager::extract_package_tophalf(0x%x, 0x%llx, 0x%x, 0x%llx, 0x%llx, 0x%x, 0x%x)
- No permission for extract_package(%d)
- update_manager::update_package_tophalf(0x%x, 0x%llx, 0x%x, 0x%llx, 0x%llx, 0x%x, 0x%x)
- update_manager::update_package_tophalf() not supported package type = %d
- No permission for update_package(%d)
- update_manager::set_token()
- update_manager::set_token verify success
- update_manager::set_token verify failure
- update_manager::set_token store qa flag failure
- update_manager::set_token store qa flag exist flag failure
- update_manager::read_eprom(0x%x)
- update_manager::get_token_seed()
- update_manager::get_token_seed get qa flag exist flag failure
- update_manager::get_token_seed use previous qa flag
- update_manager::get_token_seed get qa flag failure
- update_manager::get_token_seed success
- qa_flag:
- update_manager::get_token_seed failure
- update_manager::inspect_package_bottomhalf()
- update_manager::extract_package_bottomhalf()
- update_manager::get_extract_package()
- update_manager::illegal parameter
- update_manager::no entry
- update_manager::invalid context
- update_manager::copy extracted data
- update_manager::update_package_bottomhalf()
- update_manager::update_package_bottomhalf start processing
- update_manager::update_package_bottomhalf nothing to do
- update_manager::get_fix_instruction()
- [%d] cp = %d
- invalid check point = %d
- not fatal error in DEH.
- fatal error in DEH.
- update_manager::erase_core_os_standby_bank()
- update_manager::erase_core_os_standby_bank() normal mode. skipped
- erasing core os in standby bank...
- update_manager::erase_core_os_standby_bank() config_manager failure
- update_manager::erase_core_os_standby_bank() get_info() failure
- update_manager::erase_core_os_standby_bank() region_manager failure
- update_manager::erase_core_os_standby_bank() get sbi flag failure
- update_manager::erase_core_os_standby_bank() erase flag is not settle. skipped
- erasing core os in standby bank skipped.
- update_manager::erase_core_os_standby_bank() sense standby bank failure
- update_manager::erase_core_os_standby_bank() get real flash offset failure
- update_manager::erase_core_os_standby_bank() get standby os region failure
- update_manager::erase_core_os_standby_bank() get standby os region header failure
- update_manager::erase_core_os_standby_bank() seach file failure. fall back fail safe
- update_manager::erase_core_os_standby_bank() bank_size = 0x%llx, erase size = 0x%llx
- update_manager::erase_core_os_standby_bank() memory shortage
- real_offset = 0x%llx, align = 0x%llx, flags = 0x%llx
- update_manager::erase_core_os_standby_bank() done.
- update_manager::erase_core_os_standby_bank() clear sbi_flag failure
- erasing core os in standby bank done...
- update_manager::erase_hash_standby_bank(%d)
- in product mode, erasing is skipped.
- update_manager::erase_hash_standby_bank() get_version_and_hash() failure
- update_manager::erase_hash_standby_bank() already erased
- update_manager::erase_hash_standby_bank() set_version_and_hash() failure
- update_manager::set_debug_support_repository() modify repository failure
- update_manager::set_debug_support_repository() create repository failure
- update_manager::init_ss_params_repositories() read eprom failure(%d)
- fall back to using safe parameter
- set_debug_support_repository() failure
- update_manager::init_ss_params_repositories() debug_support = 0x%016llx, 0x%016llx
- update_manager::set_recover_mode_repository() modify repository failure
- update_manager::set_recover_mode_repository() create repository failure
- set_recover_mode_repository() failure
- update_manager::init_ss_params_repositories() recover mode off
- update_manager::init_ss_params_repositories() recover mode on
- update_manager::set_fself_control_repository() modify repository failure
- update_manager::set_fself_control_repository() create repository failure
- update_manager::init_device_type() read eprom failure(%d)
- fall back to using safe parameter
- update_manager::init_ss_params_repositories() fself_control = 0x%x
- set_fself_control_repository() failure
- update_manager::init_ss_params_repositories()
- set_fself_control_flag() failure = %d
- set_recover_mode_flag() failure = %d
- set_debug_support_flag() failure = %d
- update_manager::set_update_status_repository() modify repository failure
- update_manager::set_update_status_repository() create repository failure
- update_manager::write_eprom(0x%x, 0x%x)
- update_manager::write_eprom() check delayed bank swap
- update_manager::write_eprom() do delayed bank swap for core os
- update_manager::write_eprom() do delayed bank swap for program revoke list
- update_manager::write_eprom() do delayed bank swap for package revoke list
- update_manager::write_eprom() check permission
- update_manager::write_eprom() allowed
- update_manager::write_eprom() denied
- update_manager::set_qa_flag_repository() modify repository failure
- update_manager::set_qa_flag_repository() create repository failure
- update_manager::init_qa_flag()
- update_manager::set_qa_flag_repository() read eprom failure
- update_manager::set_qa_flag_repository() failure
- update_manager::init_qa_flag() no token
- update_manager::init_qa_flag() installed qa_flag was broken.
- update_manager::init_qa_flag() update qa flag value = 0x%x
- QA_FLAG_FORCE_UPDATE settle
- QA_FLAG_ALLOW_NON_QA settle
- update_manager::do_fix_regions()
- update_manager::do_fix_regions() read eprom failure
- update_manager::do_fix_regions() update_status = 0x%x
- update_manager::do_fix_trm_regions()
- update_manager::sc version = 0x%x, status = 0x%x
- update_manager::init_for_updater(%d) failure
- update_manager::initialize_revoke_list_info(%d) for package failure
- update_manager::initialize_revoke_list_info(%d) for program failure
- update_manager::init_device_type()
- update_manager::init_device_type() dev_type = (0x%llx, 0x%llx)
- update_manager::init_device_type() failure = %d
- lv1.self
- spu_token_processor.self
- lv2_kernel.self
- certified_file::invalid m_magic
- certified_file::invalid m_version
- certified_file::invalid m_category
- certified_file::invalid m_segment_type
- certified_file::invalid m_segment_id
- 106|.X
- verify_util::SIGSPUTIMEOUT from revoke_list_loader is received
- verify_util::SIGSPUERR from revoke_list_loader is received
- verify_util::SIGSPUDMA from revoke_list_loader is received
- verify_util::SIGSPUSTOP_SL from revoke_list_loader is received
- verify_util::install_revoke_list_to_lv0()
- construct_logical_spu failure
- install_revoke_list failure
- install_revoke_list()'s status = 0x%x, stop_code = %d
- install_revoke_list() success
- install_revoke_list() failure
- verify_util::prepare_args()
- type = 0x%llx
- flags = 0x%llx
- src_addr = 0x%llx
- src_size = 0x%llx
- dst_addr = 0x%llx
- dst_size = 0x%llx
- rvk_src_addr = 0x%llx
- rvk_src_size = 0x%llx
- rvk_dst_addr = 0x%llx
- rvk_dst_size = 0x%llx
- verify_util::detect_id(): active_bank => %d
- verify_util::detect_id(): standby_bank => %d
- verify_util::detect_id(): id => %d
- verify_util::get version and hash from SC
- verify_util::version : 0x%llx
- verify_util::hash1 :
- verify_util::hash2 :
- verify_util::get_version_and_hash() failure : %d
- verify_util::calc_hash_of_target(src_addr = 0x%llx, size = %d)
- verify_util::invalid parameters
- verify_util::Calc SHA-1 hash failure
- write_data(%d, 0x%llx, 0x%llx, 0x%llx)
- write_data(): offset/size error
- read_data(%d, 0x%llx, 0x%llx, 0x%llx)
- read_data(): offset/size error
- storage_bank_indicator
- m_active_bank = 0x%llx
- m_current_bank = 0x%llx
- m_bank_size = 0x%llx
- m_flags = 0x%llx
- Mismatch active_bank and current_bank
- Need reboot, and fix bank indicator
- real_bank_size = 0x%llx
- region_manager::setup_internal()
- bank0 = 0x%llx, bank1 = 0x%llx
- swap_boot_bank(0x%llx)
- (before)m_bank_info.m_active_bank = 0x%llx
- (before)m_bank_info.m_current_bank = 0x%llx
- (before)m_bank_info.m_flags = 0x%llx
- (after)m_bank_info.m_active_bank = 0x%llx
- (after)m_bank_info.m_current_bank = 0x%llx
- (after)m_bank_info.m_flags = 0x%llx
- region_manager::set_update_status(%d)
- m_update_status = 0x%x
- m_update_flag = 0x%x
- m_live_size = 0x%llx
- region_manager::get_update_status(%d)
- m_update_status = 0x%x
- m_update_flag = 0x%x
- m_live_size = 0x%llx
- top_toc
- asecure_loader
- eEID
- cISD
- cCSD
- trvk_prg
- trvk_pkg
- cvtrm
- nand_update
- lsp_update
- bdit_firmware
- bdpt_301r_firmware
- bdpt_302r_firmware
- bdpt_303r_firmware
- ros0
- ros1
- trvk_prg0
- trvk_prg1
- trvk_pkg0
- trvk_pkg1
- bdpt_304r_firmware
- END_OF_REGION
- /proc/partitions/%d/mem
- update_token_processor::SIGSPUMB caught(not disired)
- update_token_processor::SIGSPUTIMEOUT caught(not disired)
- update_token_processor::SIGSPUERR caught(not disired)
- update_token_processor::SIGSPUDMA caught(not disired)
- update_token_processor::SIGSPUMB msg = 0x%x
- update_token_processor::SIGSPUSTOP_SL received
- update_token_processor::status = 0x%x
- update_token_processor::stop_code = 0x%x
- update_token_processor::SIGSPUSTOP received
- update_token_processor::read_idps() read EID0 size failure(%d)
- update_token_processor::read_idps() EID0 size = %d
- update_token_processor::read_idps() malloc failure
- update_token_processor::read_idps() read EID0 failure(%d)
- update_token_processor::read_idps() EID0
- update_token_processor::read_idps() failure(%d)
- update_token_processor::create_command() failure(%d)
- update_token_processor::load_module() failure
- update_token_processor::request_loading_spu_module() failure
- update_token_processor::request_loading_spu_module() success
- bd_updater::detect_need_eject(): type = %d, revision = %d,
- need_eject = true
- need_eject = false
- bd_updater::disable_reqsense() ret = 0x%d,(result_code = %lld)
- bd_updater::enable_reqsense() ret = 0x%d,(result_code = %lld)
- secure firmware version = 0x%llx
- secure command timeout
- bd_updater::eval_exception_rules(0x%llx)
- installed_version = 0x%llx
- exception rules matched.
- bd_updater::sense_cmd()
- dump sense data
- bd_updater::check_cmd_result()
- bd_updater::check_cmd_result(): result_code = 0x%llx
- test_cmd::send_atp_command
- test_cmd::send_atp_command returned
- bd_updater::detect_drive_generation()
- bd_updater::detect_drive_generation(): mode_sense_cmd() failure = 0x%d
- bd_update::detect_drive_generation:
- page_code = 0x%x, major = 0x%x, minor = 0x%x, gen = 0x%x
- bd_updater::polling_progress()
- TEST UNIT READY failure(ss_status = %d)
- REQUEST SENSE returns 2/04/07 and report no progress(because of invalid command issued. ignore it)
- Writing... %d %%
- REQUEST SENSE returns 2/3a/0 (invalid firmware length or combination reported)
- REQUEST SENSE returns 5/26/0 (invalid firmware combination or hash error reported)
- REQUEST SENSE returns 4/3e/01 (failure erasing or writing flash of BD drive error reported)
- TEST UNIT READY success(result_code = 0x%llx)
- bd_updater::writebuf_cmd(0x%x, 0x%x, 0x%x, 0x%x, 0x%x)
- atpcmd->pkt[%d] = 0x%x
- atpcmd->blocks = 0x%x
- atpcmd->block_size = 0x%x
- atpcmd->arglen = 0x%x
- dump write buffer command
- bd_updater::send_firmware(0x%llx, 0x%llx)
- send firmware data to drive
- send WRITE_BUFFER command(buf = 0x%x, offset = 0x%x, size = 0x%x)
- WRITE BUFFER failure(ss_status = %d)
- WRITE BUFFER failure(result_code = 0x%llx)
- sense_key = 0x%x,
- asc = 0x%x,
- snsAscq[0] = 0x%x
- REQUEST SENSE returns 5/24/0 (invalid data length or continuous error reported)
- (generation mismatch detected. not fatal error.)
- bd_updater::readbuf_cap_cmd()
- bd_updater::readbuf_cmd(0x%x, 0x%x, 0x%x, 0x%x, 0x%x)
- bd_updater::eject()
- bd_updater::eject: ret = %d, result_code 0x%llx
- bd_updater::stop()
- bd_updater::stop: ret = %d, result_code 0x%llx
- bd_updater::prepare_drive()
- wait until drive update ready
- TEST UNIT READY
- TEST UNIT READY failure(result_code = 0x%llx)
- now drive update ready
- drive update not ready
- GET EVENT STATUS
- GET EVENT STATUS failure(ss_status = %d)
- inquiry cmd(ret = %d, result_code = 0x%llx)
- 0x%02x(%c)
- bd_updater::inquiry
- bd_updater::inquiry: ret = %d, result_code 0x%llx
- bd_updater::detect_drive_type()
- bd_updater::detect_drive_type(): inquiry() failure = 0x%d
- bd_updater::detect_drive_type() = %d
- bd_updater::detect_drive_type(): detect_drive_generation() failure = 0x%d
- bd_update::detect_drive_type(): generation = 0x%x, revision = %d
- SONY EmerFlashROM
- SONY PS-EMBOOT 300R
- SONY BDRW AQUAM(BDIT)
- SONY PS-SYSTEM 300R
- SONY PS-SYSTEM V300
- SCEI EMER-FLASH-8
- SONY PS-EMBOOT 301R
- SONY PS-SYSTEM 301R
- SONY PS-SYSTEM 302R
- SONY PS-EMBOOT 302R
- SONY PS-SYSTEM 303R
- SONY PS-EMBOOT 303R
- SONY PS-SYSTEM 304R
- SONY PS-EMBOOT 304R
- sc_updater:: major = 0x%x, minor = 0x%x.
- /dev/sc2
- sc_updater:: sc device file open failure.
- sc_updater:: detect sc type failure.
- sc_updater:: detect rom revision failure.
- sc_updater:: sc_type = 0x%llx, rom revision = 0x%llx.
- read_cs_area():illegal parameter
- read_industry_area():illegal parameter
- get_ps_code failure = %d. return default
- product_code = 0x%x, product_sub_code = 0x%x
- detect DEH compatible.
- detect vflash on. deal with D-chassis compatible.
- chassis type = %d: mask = 0x%llx: h_id = 0x%llx
- special case: target = 0x%llx, required = 0x%llx
- normal case: target = 0x%llx, required = 0x%llx
- chassis type = %d
- get BD firmware version from TRM.
- get BD firmware version from secure command.
- sc device file open failure.
- get_patch_version_in_eprom() success = 0x%llx.
- get_patch_version_in_eprom() failure = %d.
- decrypt_and_verify_update_package failure(%d)
- (flash)version = 0x%llx
- (file) version = 0x%llx
- older version (NG)
- same version (OK) (TOOL/DEX/ARCADE policy)
- same version (OK) (CEX policy for Core OS)
- same version (NG) (CEX policy)
- newer version (OK)
- h_attribute = 0x%llx
- manufacturing OS image check.
- denied manufacturing OS image in normal mode.
- accepted manufacturing OS image in manufacturing mode.
- revoked by buildin revoke list.
- not revoked by buildin revoke list.
- chassis type miss matched.
- chassis type matched.
- spu_pkg_rvk_verifier.self
- certified_file_verifier::SIGSPUMB caught(not disired)
- certified_file_verifier::plain_src_addr = 0x%llx, plain_size = 0x%llx, enc_size = 0x%llx
- certified_file_verifier::prepare_args failure
- certified_file_verifier::load_module() failure : %d
- certified_file_verifier::request_loading_spu_module() failure
- cerfified_file_verifier::request_loading_spu_module() success
- certified_file_verifier::SIGSPUTIMEOUT caught(not disired)
- certified_file_verifier::SIGSPUERR caught(not disired)
- certified_file_verifier::SIGSPUDMA caught(not disired)
- certified_file_verifier::SIGSPUMB msg = 0x%x
- certified_file_verifier::SIGSPUMB read PUINTMB failure
- certified_file_verifier::SIGSPUSTOP_SL received
- certified_file_verifier::status = 0x%x
- certified_file_verifier::stop_code = 0x%x
- certified_file_verifier::SIGSPUSTOP received
- ret:%d :%d
- policy:%08X
- policy not match condition
- HW: auth_sv ret:%d
- HW:disc_auth_emu:%d
- HW: disc auth emu API(%d)
- HW:param error:%d
- HW: disc_mode %d
- HW:test_unit_ready ret:%d code:%lx
- HW:test_unit req sense 0x%08x
- HW:inquiry ret %d result %d
- HW:inquiry:%s:%s
- HW:FW not supported
- failed
- Success
- HW:sendign security command for check
- retry_auth_drive(%d): ret=%d
- HW: get_vesion
- HW:me_dec_block:index %llu size %llu
- HW:me_auth_header: size %llu
- HW:mc: ret %d
- HW:mc:%p %p %p
- HW: ps3 disc change new API
- HW: ps3 disc param %d
- profile:%08X
- HW: not ps3 disc
- HW: size :%d mode :%d
- HW: ps3 hdd game auth new API
- HW: not ps3 disc, set policy
- auth_disc_hdd fail:(%d) recover..
- HW: save disc id for HDD
- HW: ps3 disc auth new API
- HW: save disc id
- HW: ps2 disc auth
- HW: not ps2 disc
- HW:drive_auth:%d
- HW: Check device file:
- HW: drive interface is busy
- .drive interface open() failed
- HW: not ready, clean key
- HW: ret %d
- HW: not ready for auth, clean key
- HW:encdec/ata param:0x%lx
- HW: set_encdec_key for delete_ata ret:%d
- SB: atagpest %lx
- HW: send_sb_clear ret:%d result:%p
- PS-SYSTEM
- PS-SPECIAL
- incorrect header check
- unknown compression method
- invalid window size
- unknown header flags set
- header crc mismatch
- invalid block type
- invalid stored block lengths
- too many length or distance symbols
- invalid code lengths set
- invalid bit length repeat
- invalid literal/lengths set
- invalid distances set
- invalid literal/length code
- invalid distance code
- invalid distance too far back
- incorrect data check
- incorrect length check
- IiGM
- #bML
- ***************************************************************************************
- /dev/rbd0
- syscon write data:
- command write failed. (%d, %d)
- read failed. (%d, %d)
- syscon read data:
- %04x: %08x
- %08x
- %08x
- map_pages failed: this = %p, area_pages = %d
- virtual_trm_manager::read_flash_raw : vector_io::range, r=%d
- virtual_trm_manager::read_flash_raw : vector_io::read, r=%d
- !!! virtual_trm_manager::restart_objs [setup_header] : array_t::setup, r=%d
- virtual_trm_manager::set_flash_tampered
- !!! virtual_trm_manager::set_flash_tampered : tr-start, r=%d
- !!! virtual_trm_manager::set_flash_tampered : flash write, r=%d
- !!! virtual_trm_manager::set_flash_tampered : tr-force_commit, r=%d
- virtual_trm_manager::set_srh_mismatched
- !!! virtual_trm_manager : sc_decrypt sanity check error r=%d
- virtual_trm_manager::decrypt_master: subject_id=(0x%llx,0x%llx)
- virtual_trm_manager::decrypt_with_portability
- virtual_trm_manager::decrypt: subject_id=(0x%llx,0x%llx)
- !!! virtual_trm_manager : sc_encrypt sanity check error r=%d
- virtual_trm_manager::encrypt_with_portability
- virtual_trm_manager::encrypt: subject_id=(0x%llx,0x%llx)
- virtual_trm_manager : GET_PRODUCT_MODE, r=%d
- virtual_trm_manager::backup_flash
- virtual_trm_manager::backup_flash : read_flash_raw, r=%d, pos=0x%llx, size=%llu
- virtual_trm_manager::flash_addr_size
- virtual_trm_manager::flash_addr_size : vector_io::range, r=%d
- virtual_trm_manager::restore_srk_srh
- virtual_trm_manager::backup_srk_srh : sc_manager_if::restore_root_info r=%d
- virtual_trm_manager::backup_srk_srh
- virtual_trm_manager::backup_srk_srh : sc_manager_if::backup_root_info r=%d
- virtual_trm_manager::write_flash_raw : vector_io::range, r=%d
- virtual_trm_manager::write_flash_raw : vector_io::erase_and_program, r=%d
- virtual_trm_manager::write_flash_raw : vector_io::read, r=%d
- virtual_trm_manager::write_flash_raw : written data mismatch detected.
- virtual_trm_manager::restore_flash
- virtual_trm_manager::restore_flash : write_flash_rawr=%d, pos=0x%llx, size=%llu
- !!! virtual_trm_manager : get_table_hash, r=%d
- virtual_trm_manager::vtrm_chk_stat, m_stat=%d
- !!! virtual_trm_manager::check_table_icv read, r=%d
- virtual_trm_manager: memory shortage in restart.
- virtual_trm_manager: srh mismatch detected in restart.
- virtual_trm_manager: flash format error detected in restart.
- virtual_trm_manager: version mismatch detected.
- virtual_trm_manager: internal error in restart.
- virtual_trm_manager: need initialize (illegal state).
- virtual_trm_manager: need restart (illegal state).
- virtual_trm_manager: state transittion error.
- virtual_trm_manager::status
- virtual_trm_manager::%s : sanity check error #%d
- status
- virtual_trm_manager::status : *m_p_htbl check icv all mismatched!
- !!! virtual_trm_manager::update_table_icv : read, r=%d
- !!! virtual_trm_manager::update_table_icv : write, r=%d
- !!! virtual_trm_manager : sc_get_srh sanity check error : r=%d
- virtual_trm_manager::fix_2pc_status : root hash (FLASH) =
- virtual_trm_manager::fix_2pc_status : need 2pc commit/abort.
- virtual_trm_manager::fix_2pc_status : commit
- !!! vtrm::fix_2pc_status : two_pc_proto::abort r=%d
- virtual_trm_manager::fix_2pc_status : abort
- !!! virtual_trm_manager::fix_2pc_status : two_pc_proto::abort r=%d
- virtual_trm_manager::_fix_2pc_status : root hash matching OK.
- virtual_trm_manager::_fix_2pc_status : root hash matching NG.
- !!! virtual_trm_manager : sc_set_srh sanity check error : r=%d
- virtual_trm_manager::update_srh done.
- virtual_trm_manager::update_srh : root hash =
- virtual_trm_manager::update_srh : root hsec =
- !!! virtual_trm_manager::restart_objs [restart_twopc] : two_pc_proto::restart, r=%d
- !!! virtual_trm_manager : sc_is_init_vtrm sanity check error : r=%d
- !!! virtual_trm_manager::restart_objs [retrieve_rhash_rhsec] : fatal error #0, r=%d
- virtual_trm_manager::restart_objs [retrieve_rhash_rhsec] : root hash (TRM) =
- virtual_trm_manager::restart_objs [retrieve_rhash_rhsec] : root hsec (TRM) =
- !!! virtual_trm_manager::restart_objs : [get_twopc_range] two_pc_proto::range, r=%d
- virtual_trm_manager::restart_objs [get_twopc_range] : vtrm flash area : start=0x%x, len=0x%x
- !!! virtual_trm_manager::restart_objs [check_header] : array_t::read r=%d
- virtual_trm_manager::restart_objs [check_header] : magic_number=0x%llx, format_version=0x%llx, program_version=0x%llx
- !!! virtual_trm_manager::restart_objs [restart_htbl] : hashtable_t::restart, r=%d
- virtual_trm_manager::restart
- virtual_trm_manager::restart : m_stat=%d, r=%d
- virtual_trm_manager::force_restart
- virtual_trm_manager::force_restart : restart r=%d
- virtual_trm_manager::initialize
- !!! virtual_trm_manager::initialize : init, r=%d
- !!! virtual_trm_manager::initialize : range, r=%d
- virtual_trm_manager::initialize : raw flash area : start=0x%x, len=0x%x
- virtual_trm_manager::initialize : htbl flash area : start=0x%x, len=0x%x
- (printed address is smaller than real address by a flash_offset).)
- virtual_trm_manager::initialize : flash erase done. (1/6)
- virtual_trm_manager::initialize : setup_header done. (2/6)
- !!! virtual_trm_manager : get_random_number sanity check error : r=%d
- virtual_trm_manager::initialize [init_db] : get_random_numebr, r=%d
- !!! virtual_trm_manager::initialize [init_db] : array_t::setup, r=%d
- !!! virtual_trm_manager : sc_init_for_vtrm sanity check error : r=%d
- virtual_trm_manager::initialize [init_sc] : update_srh, r=%d
- !!! virtual_trm_manager::inititialize [init_header] : array_t::write, r=%d
- virtual_trm_manager::initialize : restart, r=%d
- virtual_trm_manager::initialize : restart done. (6/6)
- virtual_trm_manager::initialize : init_db done. (3/6)
- virtual_trm_manager::initialize : sc_manager::init_for_vtrm done.
- virtual_trm_manager::initialize : init_sc done. (4/6)
- virtual_trm_manager::initialize : init_header done. (5/6)
- !!! virtual_trm_manager::setup_flash : flash_io::init, r=%d
- !!! virtual_trm_manager::instanciate_objs [print_flash_range] : flash_io::range, r=%d
- virtual_trm_manager::instanciate_objs [print_flash_range] : raw flash area : start=0x%x, len=0x%x
- (printed address is smaller than real value by a flash_offset.)
- virtual_trm_manager::instanciate
- virtual_trm_manager::free: subject_id=(0x%llx,0x%llx), nth=%llu
- internal subject_id=(0x%llx,0x%llx)
- free
- !!! virtual_trm_manager::free : sanity check error #2: r=%d
- !!! virtual_trm_manager::store : update_table_icv, r=%d
- virtual_trm_manager::retrieve: subject_id=(0x%llx,0x%llx), nth=%llu
- retrieve
- virtual_trm_manager::retrieve: block=
- false
- true
- virtual_trm_manager::store: subject_id=(0x%llx,0x%llx), nth=%llu, TRM_update=%s
- virtual_trm_manager::store: block=
- store
- !!! virtual_trm_manager::store : sanity check error #2, r=%d, stat=%d
- !!! virtual_trm_manager::store : sanity check error #3: r=%d
- Retry_flag: %02x
- PRODUCT_CODE: %04x
- me_auth_2: block_info no_entry
- me_auth_2: ret[0]: 0x%x
- me_auth_2: ret[1]: 0x%x
- me_auth_2: ret[2]: 0x%x
- me_auth_2: clear state
- me_auth_1: ret[0]: 0x%x
- me_auth_1: ret[1]: 0x%x
- me_auth_1: ret[2]: 0x%x
- me_auth_2: last bit entry to dec/auth: %d
- mc_auth_2: ret[0]: 0x%x
- mc_auth_2: ret[1]: 0x%x
- mc_auth_2: ret[2]: 0x%x
- mc_auth_1: ret[0]: 0x%x
- mc_auth_1: ret[1]: 0x%x
- mc_auth_1: ret[2]: 0x%x
- auth_sv: ret[0]: 0x%x
- auth_sv: ret[1]: 0x%x
- auth_sv: ret[2]: 0x%x
- get_random_number: ret[0]: 0x%x
- get_random_number: ret[1]: 0x%x
- get_random_number: ret[2]: 0x%x
- set_encdec_key: ret[0]: 0x%x
- set_encdec_key: ret[1]: 0x%x
- set_encdec_key: ret[2]: 0x%x
- sbm_set_key: get_result: ret[0]: 0x%x
- sbm_get_rnd: get_result: ret[0]: 0x%x
- sbm_get_rnd: get_result: ret[1]: 0x%x
- sb_iso_spu_module.self
- sbm_get_rnd: run: ret[0]: 0x%x
- sbm_set_key: run: ret[0]: 0x%x
- sv_auth: run: get_result[0]: 0x%x
- sv_auth: get_result: ret[1]: 0x%x
- sv_iso_spu_module.self
- sv_auth: run: ret[0]: 0x%x
- mc_auth_2: get_result: ret[0]: 0x%x
- mc_auth_1: get_result: ret[0]: 0x%x
- mc_iso_spu_module.self
- mc_auth_2: run: ret[0]: 0x%x
- mc_auth_1: run: ret[0]: 0x%x
- me_auth_2: get_result: ret[0]: 0x%x
- me_auth_1: get_result: ret[0]: 0x%x
- me_iso_spu_module.self
- me_auth_2: run: ret[0]: 0x%x
- me_auth_1: run: ret[0]: 0x%x
- type
- sb_bus_index: %d
- SB_REV: %lx
- start signal handler sputimeout
- recv signal (%d) is SIGSPUTIMEOUT. (r4=%d)
- recv signal (%d) is not SIGSPUTIMEOUT. (r4=%d)
- start signal handler spustopsl
- recv signal (%d) is SIGSPUSTOP_SL. (r4=%d)
- recv signal (%d) is not SIGSPUSTOP_SL. (r4=%d)
- start signal handler spumbsl
- recv signal (%d) is SIGSPUMB_SL. (r4=%d)
- recv signal (%d) is not SIGSPUMB_SL. (r4=%d)
- start signal handler spuerr
- recv signal (%d) is SIGSPUERR. (r4=%d)
- recv signal (%d) is not SIGSPUERR. (r4=%d)
- start signal handler spudma
- recv signal (%d) is SIGSPUDMA. (r4=%d)
- recv signal (%d) is not SIGSPUDMA. (r4=%d)
- start signal handler spustop
- recv signal (%d) is SIGSPUSTOP. (r4=%d)
- recv signal (%d) is not SIGSPUSTOP. (r4=%d)
- start signal handler spumb
- recv signal (%d) is SIGSPUMB. (r4=%d)
- recv signal (%d) is not SIGSPUMB. (r4=%d)
- received seqno: 0x%x
- received mbmsg: 0x%x
- received cmd: 0x%x
- received cmd_data_size: 0x%x
- check_header: seqno invalid
- check_header: mbmsg invalid
- check_header: command invalid
- check_header: exit data len invalid
- send DMA data to SPU
- send_abort: ret[0]: 0x%x
- send_success: ret[0]: 0x%x
- sendrecv_process_atp: ret[0]: 0x%x
- send_data_size: 0x%x
- recv_data_size: 0x%x
- sendrecv_process_atp: ret[1]: 0x%x
- padding_size: 0x%x
- sendrecv_process: ret[1]: 0x%x
- sendrecv_process: ret[0]: 0x%x
- check_stop_code: ret: 0x%x
- stopcode: 0x%x
- check_received_data: ret[0]: 0x%x
- received DMA data from SPU
- check_received_data: seqno invalid
- check_received_data: mbmsg invalid
- check_received_data: command invalid
- sb_core: ret[0]: 0x%x
- module_bufp: 0x%x
- module_size: 0x%x
- sbm_core_process: ret[2]: 0x%x
- sbm_core_process: eid_size 0x%x is illegal
- sbm_core_process: eid is old format
- eid_bufp: %p
- eid_size: 0x%x
- sbm_core_process: ret[3]: 0x%x
- eid_size: 0x%x
- eid_read_size: 0x%x
- EID data(encrypt)
- sb_core: ret[1]: 0x%x
- sb_core: ret[2]: 0x%x
- API start DMA data
- sb_core: ret[3]: 0x%x
- API end DMA data
- SB_MGR:error: can't get sb revision
- continue..
- sendrecv_sb: ret[0]: 0x%x
- sent_data_size: 0x%x
- recd_data_size: 0x%x
- sendrecv_atp: ret[0]: 0x%x
- /dev/encdec0
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- capability_checker::check_product_mode_capability: OK
- capability_checker::check_product_mode_capability: NG
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # ss_responder::terminate
- # ss_responder::initialize
- !!! ss_responder::initialize : failed
- !!! port_id=%llu, return=%u
- # ss_responder::initialize : port_id=%d, socket=%d
- # ss_responder::loop_once : sock=%d
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- # pme_server::disconnect : PID=%u
- !!! pme_server::disconnect : close failed (errno=%d)
- # pme_server::force_close : PID=%u
- # pme_server::reply : PID=%u
- !!! pme_server::reply : close failed (errno=%d)
- # pme_server::accept : PID=%u
- !!! pme_server::accept : accept failed (errno=%d)
- !!! pme_server::accept : read_nbytes failed (return=%d)
- # pme_server::connect : PID=%u, port_id=%u
- !!! pme_server::connect : socket failed (errno=%d)
- !!! pme_server::connect : bind failed (errno=%d)
- !!! pme_server::connect : listen failed (errno=%d)
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- # ss_packet::process_async : packet_id=0x%llx
- # ss_packet::process_received (SERVER) : sock=%d
- !!! ss_packet::process_received (SERVER) error: packet format error (broken?)
- # ss_packet::process_received (SERVER) : packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- !!! ss_packet::process_received (SERVER) error: unknown packet
- # ss_packet::process_received (SERVER) error: port table inconsistent
- # ss_packet::accept_reply : accept done. sock=%d
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- timeout occured
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- _USB_DONGLE_AUTH_USB_DONGLE_
- /dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- /dev/eflash
- usbauth
- debug
- level
- Ttoken
- debug
- level
- hflash
- boot
- <update
- debug
- level
- 8param
- flag
- product
- mode
- support
- xrecover
- fself
- control
- status
- `update
- request
- extract
- inspect
- flash
- boot
- dummy
- debug
- level
- pSCEIVTRM
- vtrm
- debug
- level
- sb_iso
- debug
- level
- sb_mngr
- clock
- common
- printf
- enabled
- debug
- level
- param
- bank
- rvkprg
- rvkpkg
- HCyt2.
- flash
- boot
- syscon
- pversion
- ac_cntl
- debug
- level
- param
- product
- mode
- commlib
- debug
- level
- ss_init
- debug
- level
- *********************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 3.4.1 (CELL 2.2.1, May 23 2005)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- *********************************************************************
- ss_server2::initialize_modules: iimgr failed
- ss_server2::initialize_modules: secure_rtc failed
- ss_init_if::notify_failure failed:
- ss_init_if::notify_ready failed:
- get_open_psid: ret[0]: 0x%x
- get_open_psid: ret[1]: 0x%x
- get_open_psid: ret[2]: 0x%x
- get_ps_code: ret[0]: 0x%x
- get_ps_code: ret[1]: 0x%x
- get_ps_code: ret[2]: 0x%x
- get_device_id: ret[0]: 0x%x
- get_device_id: ret[1]: 0x%x
- get_device_id: ret[2]: 0x%x
- get_device_type: ret[0]: 0x%x
- get_device_type: ret[1]: 0x%x
- get_device_type: ret[2]: 0x%x
- aim_get_open_psid: get_result: ret[0]: 0x%x
- aim_get_ps_code: get_result: ret[0]: 0x%x
- aim_get_device_id: get_result: ret[0]: 0x%x
- aim_get_device_type: get_result: ret[0]: 0x%x
- aim_get_open_psid: run: ret[0]: 0x%x
- aim_get_ps_code: run: ret[0]: 0x%x
- aim_get_device_id: run: ret[0]: 0x%x
- aim_get_device_type: run: ret[0]: 0x%x
- aim_get_open_psid: setup: ret[0]: 0x%x
- aim_get_ps_code: setup: ret[0]: 0x%x
- aim_get_device_id: setup: ret[0]: 0x%x
- aim_get_device_type: setup: ret[0]: 0x%x
- 0x%02x
- aim_core: SIGSPUTIMEOUT caught(not desired)
- aim_core: SIGSPUERR caught(not desired)
- aim_core: SIGSPUDMA caught(not desired)
- aim_core: SIGSPUSTOP_SL caught(not desired)
- aim_core: SIGSPUSTOP caught
- aim_core: SIGSPUMB_SL caught(not desired)
- aim_core: SIGSPUMB caught(not desired)
- m_dma_bufp: 0x%llx
- m_dma_size: 0x%x
- aim_core_process: ret[0]: 0x%x
- aim_spu_module.self
- aim_core_process: ret[1]: 0x%x
- module_bufp: 0x%x
- module_size: 0x%x
- aim_core_process: ret[2]: 0x%x
- eid_bufp: 0x%llx
- eid_size: 0x%x
- aim_core_process: ret[3]: 0x%x
- eid_size: 0x%x
- eid_read_size: 0x%x
- EID data(encrypt)
- aim_core_process: ret[4]: 0x%x
- aim_core_process: ret[5]: 0x%x
- signal_type: 0x%x
- aim_core_process: ret[6]: 0x%x
- stop_code: 0x%x
- read_system_data_from_eeprom: buf_addr == NULL
- metldr
- DEFAULT.SPP
- SCE_CELLOS_SS_INDI_INFO_EID
- ### unmap pages
- metldr
- ###Format1
- ###Format2
- set_rtc: ret[2]: 0x%x
- set_time: ret[1]: 0x%x
- subject ID:
- lpar_authority_id: 0x%llx
- program_authority_id: 0x%llx
- ID:
- internal tid: 0x%llx
- set_time: ret[2]: 0x%x
- set_time: ret[0]: 0x%x
- get_time: ret[1]: 0x%x
- get_time: ret[2]: 0x%x
- value: 0x%llx
- status: 0x%llx
- get_time: ret[0]: 0x%x
- SCE_CELLOS_SS_SECURE_RTC
- setup: ret[0]: 0x%x
- size: 0x%x
- setup: ret[1]: 0x%x
- out_size: 0x%x
- SPL:check laid:%lx %lx
- SPL: laid check error:%lx %lx
- SPL:check paid:%lx %lx
- SPL: laid or paid check error: laid:%lx %lx
- paid:%lx %lx
- SPL:get_component index error: %d
- SPL:get_component: get_module_location failure(%d)
- SPL:get_component: file_size:%d offset:%d
- SPL:get_component: %d bytes to read.
- SPL:get_component info.la: %p info.size: %d
- SPL:get_component: mmap(%d)
- SPL:get_component: read %d bytes.
- munmap: %d
- SPL:get_component: munmap(%d)
- SPL:get_component: read(%d)
- SPL:get_component: region size error(%d)
- SPL:get_component: done
- SPL: get_contents: type %lx
- SPL: profile_mgr get faild %d
- SPL: profile not initialized %d
- SPL: get_lpar_parameter_size: %s
- SCE_CELLOS_SYSTEM_MGR
- SPL: get_lpar_parameter: lpar_list fail: %d
- SPL: get_lpar_parameter: lpar_name size : %d
- SPL: get_lpar_parameter: lpar_parameters size : %d
- SPL: get_contents_size: type %lx
- SPL: get_lpar_info: type %d
- SPL: get_lpar_info type error
- SPL: get_lpar_parameter: %s
- SPL: get_lpar_parameter: lpar_info : %s
- SPL: get_lpar_parameter: lpar_info fail: %d
- SPL: get_lpar_parameter:done: %s
- emer_init.self
- SPL:spp header format version error:%d
- SPL:spp header size error:%d
- SPL:spp header align error:%d
- PM:signal: timeout
- ----- signal has arrived -----
- SL:timeout_handler:read_spu_status failed.
- SL:signal: handler_end
- PM:signal: spu err
- SL:err_handler:read_spu_status failed.
- SL:signal: spu dma
- ----- signal spudma -----
- SL:dma_handler:read_spu_status failed.
- spu problem area: %p
- SL:signal: stop and signal
- SL:sigspustop_handler:read_spu_status failed.
- SPU state:%lu
- stop code = %u
- signal result = %p
- PM:verify_profile size:%d
- PM: spp header error %d
- PM:fileloader load spu_module faild: %d
- PM:fileloader spu_module get_buffer faild: %d
- PM:fileloader get spu module size faild: %d
- PM: spu request done
- PM:verify_profile:request_loading_spu_module failure %d
- sleep...
- PM:verify spp finish
- PM:SIGSPUDMA: error
- PM:SIGSPUERR: error
- PM:SIGSPUTIMEOUT: error
- PM:verify_profile finish:%d size:%lu
- PM: delete_profile: %s
- PM:fileloader load faild: %d
- PM:fileloader get_buffer faild: %d
- PM:fileloader get_size faild: %d
- spu_filename:%s
- PM: verify profile failed %d
- PM: free buffer for load_profile
- PM:stored spp:%s,
- requested spp:%s
- PM: flash_id: %d, flash_top_offset: %d
- get_repository_node_value failed:
- PM:has prof:%s
- PM:load prof:%s
- PM: load faild:%d %s
- /flh/os/spp_verifier.self
- /rmt/default.spp
- /flh/os/default.spp
- FL:vfs open error:%d :toolong
- FL:vfs open error:%d :errno:%d
- FL:vfs size error:%d
- FL:lseek fail, and close fail:fd: %d
- SL:allocate fail:size(%d)
- FL:close fail:fd: %d
- FL: vfs seek error:%d
- FL: vfs size error:%d
- FL:size error:%d %d
- FL:file loaded :%d
- FL: conf_mgr init err
- offset:%d size: %d
- FL:read error:%d
- /flh/os/
- FL: release_buffer for pme_malloc
- FL: malloc :size %lu
- /rmt
- /local_sys0
- /flh
- * map data buffer:
- /proc/partitions/%d/mem
- couldn't open file...(%s)
- mapped address: %p
- mmap failed: errno = %d
- close error:%d
- spp:data size error:%lu
- spp:contents size is too big:%lu
- spp: segment size exceed whole data size error
- error seg_size is too large
- spp: new for contents[] failed
- spp:create_contents error. %d
- spp: release: seg_num %d
- spp: seg %d ct %d released
- spp: seg %d cts released
- spp: segs released
- spp: all segments released
- spp: released
- spp: create: has data %d
- spp: create: start create
- spp: create: null buffer
- spp: create: too small
- spp: version error: (%d)
- spp:segment seg_num error: %lu
- spp:create:new segments[]: %d
- spp: new for segments[] failed
- spp: create new segment: %d
- spp:create segment:%d : error
- spp:create: total data length check error
- spp:get_contents: nodata %d
- spp:get_contents: invalid type:%d
- spp:skip type:%d
- spp:get_contents: not found: type %d
- total seg_num:%d
- seg:%d
- restore_root_info: ret[0]: 0x%x
- restore_root_info: ret[1]: 0x%x
- restore_root_info: ret[2]: 0x%x
- backup_root_info: ret[0]: 0x%x
- backup_root_info: ret[1]: 0x%x
- backup_root_info: ret[2]: 0x%x
- correct_rtc_factory: ret[0]: 0x%x
- correct_rtc_factory: ret[1]: 0x%x
- correct_rtc_factory: ret[2]: 0x%x
- set_rtc_factory: ret[0]: 0x%x
- set_rtc_factory: ret[1]: 0x%x
- set_rtc_factory: ret[2]: 0x%x
- sc_binary_patch: ret[0]: 0x%x
- sc_binary_patch: ret[1]: 0x%x
- sc_binary_patch: ret[2]: 0x%x
- set_sc_status: ret[0]: 0x%x
- set_sc_status: ret[1]: 0x%x
- set_sc_status: ret[2]: 0x%x
- get_sc_status: ret[0]: 0x%x
- get_sc_status: ret[1]: 0x%x
- get_sc_status: ret[2]: 0x%x
- get_property: ret[0]: 0x%x
- get_property: ret[1]: 0x%x
- get_property: ret[2]: 0x%x
- init_for_updater: ret[0]: 0x%x
- init_for_updater: ret[1]: 0x%x
- init_for_updater: ret[2]: 0x%x
- init_for_updater: ret[3]: 0x%x
- init_for_updater: ret[4]: 0x%x
- init_for_updater: ret[5]: 0x%x
- write_eprom: ret[0]: 0x%x
- service: 0x%x
- major_version: 0x%x
- minor_version: 0x%x
- ***write using nvs service***
- write_eprom: ret[1]: 0x%x
- offset: 0x%x
- block_id: 0x%x
- block_offset: 0x%x
- write_eprom: ret[2]: 0x%x
- ***write using device_access_service***
- read_eprom: ret[0]: 0x%x
- ***read using nvs service***
- read_eprom: ret[1]: 0x%x
- read_eprom: ret[2]: 0x%x
- ***read using device_access_service***
- set_product_mode: ret[0]: 0x%x
- property: 0x%llx
- set_product_mode: ret[1]: 0x%x
- version: 0x%x
- mode: 0x%x
- set_product_mode: ret[2]: 0x%x
- product mode: 0x%x
- set_product_mode: ret[3]: 0x%llx
- set_rtc: ret[0]: 0x%x
- set_rtc: ret[1]: 0x%x
- set_region_data: ret[0]: 0x%x
- set_region_data: ret[1]: 0x%x
- set_region_data: ret[2]: 0x%x
- get_region_data: ret[0]: 0x%x
- get_region_data: ret[1]: 0x%x
- get_region_data: ret[2]: 0x%x
- set_srh: ret[0]: 0x%x
- set_srh: ret[1]: 0x%x
- set_srh: ret[2]: 0x%x
- get_srh: ret[0]: 0x%x
- get_srh: ret[1]: 0x%x
- get_srh: ret[2]: 0x%x
- decrypt: ret[0]: 0x%x
- decrypt: ret[1]: 0x%x
- decrypt: ret[2]: 0x%x
- encrypt: ret[0]: 0x%x
- encrypt: ret[1]: 0x%x
- encrypt: ret[2]: 0x%x
- init_for_vtrm: ret[0]: 0x%x
- init_for_vtrm: ret[1]: 0x%x
- init_for_vtrm: ret[2]: 0x%x
- init_for_vtrm: ret[3]: 0x%x
- init_for_vtrm: ret[4]: 0x%x
- init_for_vtrm: ret[5]: 0x%x
- pscm_restore_root_info: get_result: ret[0]: 0x%x
- scm_correct_rtc_factory: get_result: ret[0]: 0x%x
- scm_set_rtc_factory: get_result: ret[0]: 0x%x
- scm_sc_binary_patch: get_result: ret[0]: 0x%x
- scm_set_sc_status: get_result: ret[0]: 0x%x
- scm_init_for_updater: get_result: ret[0]: 0x%x
- scm_set_rtc: get_result: ret[0]: 0x%x
- scm_init_for_vtrm: get_result: ret[0]: 0x%x
- scm_set_srh: get_result: ret[0]: 0x%x
- sc_iso.self
- scm_restore_root_info: run: ret[0]: 0x%x
- scm_backup_root_info: run: ret[0]: 0x%x
- sc_iso_factory.self
- scm_correct_rtc_factory: run: ret[0]: 0x%x
- scm_set_rtc_factory: run: ret[0]: 0x%x
- scm_sc_binary_patch: run: ret[0]: 0x%x
- scm_set_sc_status: run: ret[0]: 0x%x
- scm_get_sc_status: run: ret[0]: 0x%x
- scm_get_property: run: ret[0]: 0x%x
- scm_init_for_updater: run: ret[0]: 0x%x
- scm_set_rtc: run: ret[0]: 0x%x
- scm_set_time: run: ret[0]: 0x%x
- scm_get_time: run: ret[0]: 0x%x
- scm_set_region_data: run: ret[0]: 0x%x
- scm_get_region_data: run: ret[0]: 0x%x
- scm_init_for_vtrm: run: ret[0]: 0x%x
- scm_set_srh: run: ret[0]: 0x%x
- scm_get_srh: run: ret[0]: 0x%x
- scm_decrypt: run: ret[0]: 0x%x
- scm_encrypt: run: ret[0]: 0x%x
- scm_backup_root_info: get_result: ret[0]: 0x%x
- scm_backup_root_info: get_result: ret[1]: 0x%x
- scm_set_time: get_result: ret[0]: 0x%x
- scm_set_time: get_result: ret[1]: 0x%x
- scm_set_time: get_result: id invalid
- scm_get_time: get_result: ret[0]: 0x%x
- scm_get_time: get_result: ret[1]: 0x%x
- scm_get_time: get_result: id invalid
- scm_get_time: get_result: ret[2]: 0x%x
- scm_get_time: get_result: ret[3]: 0x%x
- scm_set_region_data: get_result: ret[0]: 0x%x
- scm_set_region_data: get_result: ret[1]: 0x%x
- scm_set_region_data: get_result: id invalid
- scm_get_region_data: get_result: ret[0]: 0x%x
- scm_get_region_data: get_result: ret[1]: 0x%x
- scm_get_region_data: get_result: id invalid
- scm_get_region_data: get_result: ret[2]: 0x%x
- scm_get_srh: get_result: ret[0]: 0x%x
- scm_get_srh: get_result: ret[1]: 0x%x
- scm_get_srh: get_result: ret[2]: 0x%x
- scm_decrypt: get_result: ret[0]: 0x%x
- scm_decrypt: get_result: ret[1]: 0x%x
- scm_decrypt: get_result: type field invalid
- scm_decrypt: get_result: ret[2]: 0x%x
- scm_decrypt: get_result: ret[3]: 0x%x
- scm_encrypt: get_result: ret[0]: 0x%x
- scm_encrypt: get_result: ret[1]: 0x%x
- scm_encrypt: get_result: type field invalid
- scm_encrypt: get_result: ret[2]: 0x%x
- scm_encrypt: get_result: ret[3]: 0x%x
- scm_get_sc_status: get_result: ret[0]: 0x%x
- scm_get_sc_status: get_result: ret[1]: 0x%x
- scm_get_sc_status: get_result: ret[2]: 0x%x
- status: 0x%x
- scm_get_property: get_result: ret[0]: 0x%x
- scm_get_property: get_result: ret[1]: 0x%x
- send_body_size: 0x%x
- recv_body_size: 0x%x
- packet_size: 0x%x
- get_service_version: ret[0]: 0x%x
- recv_size: 0x%x
- recvd_size: 0x%x
- get_service_version: ret[1]: 0x%x
- status: 0x%x
- srecv_service_id: 0x%x
- write_nvs: ret[0]: 0x%x
- write_nvs: ret[1]: 0x%x
- status: 0x%x
- read_nvs: ret[0]: 0x%x
- length: 0x%x
- read_nvs: ret[1]: 0x%x
- size: 0x%x
- start signal handler sputimeout
- recv signal (%d) is SIGSPUTIMEOUT. (r4=%d)
- recv signal (%d) is not SIGSPUTIMEOUT. (r4=%d)
- start signal handler spustopsl
- recv signal (%d) is SIGSPUSTOP_SL. (r4=%d)
- recv signal (%d) is not SIGSPUSTOP_SL. (r4=%d)
- start signal handler spumbsl
- recv signal (%d) is SIGSPUMB_SL. (r4=%d)
- recv signal (%d) is not SIGSPUMB_SL. (r4=%d)
- start signal handler spuerr
- recv signal (%d) is SIGSPUERR. (r4=%d)
- recv signal (%d) is not SIGSPUERR. (r4=%d)
- start signal handler spudma
- recv signal (%d) is SIGSPUDMA. (r4=%d)
- recv signal (%d) is not SIGSPUDMA. (r4=%d)
- start signal handler spustop
- recv signal (%d) is SIGSPUSTOP. (r4=%d)
- recv signal (%d) is not SIGSPUSTOP. (r4=%d)
- start signal handler spumb
- recv signal (%d) is SIGSPUMB. (r4=%d)
- recv signal (%d) is not SIGSPUMB. (r4=%d)
- send DMA data to SPU
- send_abort: ret[0]: 0x%x
- send_success: ret[0]: 0x%x
- received seqno: 0x%x
- received mbmsg: 0x%x
- received cmd: 0x%x
- received cmd_data_size: 0x%x
- check_header: seqno invalid
- check_header: mbmsg invalid
- check_header: command invalid
- check_header: exit data len invalid
- send_data_size: 0x%llx
- recv_data_size: 0x%llx
- buf_size: 0x%x
- sendrecv_process: ret[0]: 0x%x
- sendrecv_process: ret[1]: 0x%x
- check_stop_code: ret[0]: 0x%x
- stopcode: 0x%x
- check_received_data: ret[0]: 0x%x
- received DMA data from SPU
- check_received_data: seqno invalid
- check_received_data: mbmsg invalid
- check_received_data: command invalid
- sc_core: ret[0]: 0x%x
- sc_core: ret[1]: 0x%x
- sc_core: ret[2]: 0x%x
- API start DMA data
- sc_core: ret[3]: 0x%x
- API end DMA data
- sc_sendrecv: ret[0]: 0x%x
- send_data_size: 0x%llx
- sent_data_size: 0x%llx
- recv_data_size: 0x%llx
- recvd_data_size: 0x%llx
- sc_proxy_if::sendrecv
- (%d, 0x%x, %d, %d,
- %d, %d, %d)
- In sc_proxy_if::sendrecv:
- id should be %d
- buf_addr should not be NULL
- send_size should be greater than 0
- recv_size should be greater than 0
- buf_size should not be smaller than
- send_buf or recv_buf
- /dev/sc3
- sc_proxy::open failed: ret = %d
- sc_proxy::write failed: ret = %d
- In sc_proxy_if::sendrecv: sc_proxy::close failed: ret = %d
- sc_proxy::read failed: ret = %d
- sc_proxy::close failed: ret = %d
- In sc_proxy::close: close failed: ret = %d, errno = %d
- In timeout_handler of sc_proxy: invalid signal %d
- In sc_proxy::write: buf should not be NULL
- In sc_proxy::write: nbytes should be greater than 0
- In sc_proxy::write: config_manager::initialize failed: ret = %d
- In sc_proxy::write: workaround for SC firmware bug
- In sc_proxy::write: write failed: ret = %d, errno = %d
- In sc_proxy::read: buf should not be NULL
- In sc_proxy::read: nbytes should be greater than 0
- In sc_proxy::read: signal failed
- In sc_proxy::read: old_timeout: %d
- In sc_proxy::read: read failed: ret = %d, errno = %d
- timeout occured
- In sc_proxy::open: flags should be O_RDWR
- In sc_proxy::open: open failed: ret = %d, errno = %d
- ros0
- ros1
- top_toc
- asecure_loader
- eEID
- cISD
- cCSD
- trvk_prg
- trvk_pkg
- cvtrm
- nand_update
- lsp_update
- bdit_firmware
- bdpt_301r_firmware
- bdpt_302r_firmware
- bdpt_303r_firmware
- trvk_prg0
- trvk_prg1
- trvk_pkg0
- trvk_pkg1
- bdpt_304r_firmware
- END_OF_REGION
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- capability_checker::check_product_mode_capability: OK
- capability_checker::check_product_mode_capability: NG
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # ss_responder::terminate
- # ss_responder::initialize
- !!! ss_responder::initialize : failed
- !!! port_id=%llu, return=%u
- # ss_responder::initialize : port_id=%d, socket=%d
- # ss_responder::loop_once : sock=%d
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- # pme_server::disconnect : PID=%u
- !!! pme_server::disconnect : close failed (errno=%d)
- # pme_server::force_close : PID=%u
- # pme_server::reply : PID=%u
- !!! pme_server::reply : close failed (errno=%d)
- # pme_server::accept : PID=%u
- !!! pme_server::accept : accept failed (errno=%d)
- !!! pme_server::accept : read_nbytes failed (return=%d)
- # pme_server::connect : PID=%u, port_id=%u
- !!! pme_server::connect : socket failed (errno=%d)
- !!! pme_server::connect : bind failed (errno=%d)
- !!! pme_server::connect : listen failed (errno=%d)
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- # ss_packet::process_async : packet_id=0x%llx
- # ss_packet::process_received (SERVER) : sock=%d
- !!! ss_packet::process_received (SERVER) error: packet format error (broken?)
- # ss_packet::process_received (SERVER) : packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- !!! ss_packet::process_received (SERVER) error: unknown packet
- # ss_packet::process_received (SERVER) error: port table inconsistent
- # ss_packet::accept_reply : accept done. sock=%d
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- /dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- |aim_iso
- debug
- level
- app_info
- ii_mgr
- debug
- level
- sec_rtc
- debug
- level
- param
- load
- rom1st
- ploader
- debug
- level
- (sc_iso
- debug
- level
- 8sc_mngr
- 4param
- product
- mode
- hsc_proxydebug
- level
- |common
- printf
- enabled
- debug
- level
- param
- bank
- rvkprg
- rvkpkg
- Cyt2.
- flash
- boot
- syscon
- pversion
- ac_cntl
- debug
- level
- param
- product
- mode
- $commlib
- debug
- level
- ss_init
- debug
- level
- ***********************************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- ***********************************************************************************************
- Guest OS load faild: (%d)
- load error
- SLL:setup dispatcher done : %d
- Guest OS load failed : (%d)
- lpar auth id error
- SLL:try drive auth ..
- drive setup for ps2 failed
- SLL: load_gos done: %d
- SLL:unload_gos: lpar_id:%d
- flags: %llx
- SLL:delete_lpar_auth_id failed
- SLL:delete_lpar_auth_id %lu
- SLL:stop_dispatcher to lpar failed, continue.
- SLL:prepare to shutdown
- SLL: destruct vuart in lpar:%d for service
- Destruct Service Port Failed: (%d), continue..
- SLL: construct vuart in lpar:%d for service
- Construct Service Port Failed: (%d), continue..
- gsboot: load_lv2: filename: %s
- gsboot: load_lv2: lpar_id: %d laid: %d
- SLL:fileloader load faild: %d
- SLL:mmap orig size: %lu
- SLL:mmap start address: %lu
- SLL:mmap size: %lu
- SLL:mmap faild: %d
- SLL:mmap to %p
- SLL: auth_lv2 called
- SLL: auth_lv2 fail :%d
- SLL: unmmap EA:%p
- munmap: %d
- SLL: deleting lpar_auth_id
- laid
- remove node: error status = %d
- SLL: setting lpar_auth_id
- create node: error status = %d
- FL: release_buffer for allocate_memory
- FL:munmap: %d
- FL: release: %d addr: %p
- SLL:main memory size: %lu : %lu
- construct memory segment: error status = %d
- allocated lpar:%d address: %p
- FL:mmap size: %lu
- FL:mmap faild: %d
- FL:mmap to %p
- /rmt
- /local_sys0
- /flh
- FL:vfs open error:%d :toolong
- FL:vfs open error:%d :errno:%d
- FL:vfs size error:%d
- FL:lseek fail, and close fail:fd: %d
- SL:allocate fail:size(%d)
- FL:close fail:fd: %d
- FL: vfs seek error:%d
- FL: vfs size error:%d
- FL:size error:%d %d
- FL:file loaded :%d
- FL: conf_mgr init err
- offset:%d size: %d
- FL:read error:%d
- /flh/os/
- SL:signal: stop and signal
- problem area: %p
- SPU state:%lu
- stop code = %u
- SL:signal: handler_end
- * map data buffer:
- /proc/partitions/%d/mem
- couldn't open file...(%s)
- mapped address: %p
- mmap failed: errno = %d
- close error:%d
- SL:signal: spu timeout
- ----- signal has arrived -----
- SL: timeout_handler:disable_spu_execution failed.
- SL:signal: spu err
- SL: err_handler:disable_spu_execution failed.
- SL:signal: spu dma
- SL: dma_handler:disable_spu_execution failed.
- sleep...
- SL:auth_lv2 shutdown
- SL:SIGSPUSTOP:success
- SL:SIGSPUSTOP:revoked
- SL:SIGSPUSTOP:auth_id error
- SL:SIGSPUSTOP:parameter error
- SL:SIGSPUDMA: error
- SL:SIGSPUTIMEOUT: error
- SL: destruct logial spu error: %d
- SL:auth_lv2 ret_value %d
- # ss_dispatcher::terminate
- select_with_retry : select errno=%d
- # ss_dispatcher::loop
- # ss_dispatcher::loop_once
- ## ss_dispatcher::loop_once : set sock=%d
- !!! ss_dispatcher::loop_once : select error, r=%d
- !!! ss_dispatcher::loop_once : sanity check error #1
- !!! ss_dispatcher::loop_once : dispatcher_mgr::process_received return=%d
- # ss_dispatcher::initialize
- !!! ss_dispatcher::initialize : memory shortage
- !!! ss_dispatcher::initialize : internal error r=%d
- # dispatcher_mgr::construct_vuart, la_id=%d, lpar_id=%d
- # dispatcher_mgr::construct_vuart, port_id=%u, socket=%d
- !!! dispatcher_mgr::pme_received : sanity check error #1
- !!! dispatcher_mgr::pme_received : receive error #2, r=%d
- # dispatcher_mgr::pme_received : pme_sock=%d => vuart_sock=%d.
- !!! dispatcher_mgr::pme_received : send error, r=%d
- # dispatcher_mgr::pme_received : pme_sock=%d => vuart_sock=%d(destructed LPAR).
- !!! dispatcher_mgr::pme_received : disconnect error, r=%d
- # dispatcher_mgr::api_received : api_sock=%d done.
- # dispatcher_mgr::read_vuart_null
- # dispatcher_mgr::read_vuart_null r=%d
- # dispatcher_mgr::reply_retval_only : retval=%d
- !!! dispatcher_mgr::vuart_received : receive error, r=%d
- !!! dispatcher_mgr::vuart_received : cannot map packet ID (0x%llx) to SS ID
- !!! dispatcher_mgr::vuart_received : SPM internal error
- !!! dispacher_mgr::vuart_received : access violation
- !!! dispatcher_mgr::vuart_received : socket connect error, r=%d
- !!! dispatcher_mgr::vuart_received : send error, r=%d
- # dispatcher_mgr::vuart_received, vuart_sock=%d => pme_sock=%d.
- # dispatcher_mgr::terminate
- !!! dispatcher_mgr::terminate : io error #1
- !!! dispatcher_mgr::terminate : io error #2
- !!! dispatcher_mgr::terminate : sanity check error #1
- !!! dispatcher_mgr::terminate : io error #3
- # dispatcher_mgr::init
- !!! dispatcher_mgr::init : io error #1, r=%d
- # dispatcher_mgr::init_table
- # dispatcher_mgr::process_received : socket=%d
- # dispatcher_mgr::process_received : unknown entry (%d)
- # dispatcher_mgr::destruct_vuart, lpar_id=%d
- !!! dispatcher_mgr::destruct_vuart : sanity check error #1
- !!! dispatcher_mgr::destruct_vuart : sanity check error #2
- # dispatcher_mgr::destruct_vuart, port_id=%u, socket=%d
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # vuart_pme::send
- # vuart_pme::send : write error (%d)
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # vuart_pme::disconnect
- !!! vuart_pme::disconnect : destruct_virtual_uart, return=%u
- !!! vuart_pme::disconnect : close failed (errno=%d)
- # vuart_pme::connect
- !!! vuart_pme::connect : construct_virtual_uart, return=%u
- /proc/partitions/%d/vuart/%d
- !!! vuart_pme::connect : "%s" open failed (errno=%d)
- # vuart_pme::connect : socket=%d, lparid=0x%llx, portid=0x%llx
- # vuart_pme::receive
- # vuart_pme::receive : read error (%d)
- ros0
- ros1
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # pme_client::receive : PID=%u
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- # pme_server::disconnect : PID=%u
- !!! pme_server::disconnect : close failed (errno=%d)
- # pme_server::force_close : PID=%u
- # pme_server::reply : PID=%u
- !!! pme_server::reply : close failed (errno=%d)
- # pme_server::accept : PID=%u
- !!! pme_server::accept : accept failed (errno=%d)
- !!! pme_server::accept : read_nbytes failed (return=%d)
- # pme_server::connect : PID=%u, port_id=%u
- !!! pme_server::connect : socket failed (errno=%d)
- !!! pme_server::connect : bind failed (errno=%d)
- !!! pme_server::connect : listen failed (errno=%d)
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- # ss_packet::process_async : packet_id=0x%llx
- # ss_packet::process_received (SERVER) : sock=%d
- !!! ss_packet::process_received (SERVER) error: packet format error (broken?)
- # ss_packet::process_received (SERVER) : packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- !!! ss_packet::process_received (SERVER) error: unknown packet
- # ss_packet::process_received (SERVER) error: port table inconsistent
- # ss_packet::accept_reply : accept done. sock=%d
- ss_id_attribute[%d] in ss_id_defs.h is invalid.
- In security_policy_manager::request:
- {0x%llx, 0x%llx}, 0x%llx
- security_policy_manager::initialize
- is not called
- m_acm is NULL
- SS ID %lld is invalid
- In security_policy_manager::request: access_control_if::lookup failed: ret = %d, (default deny)
- In security_policy_manager::request: access_control_if::lookup failed: ret = %d
- true
- false
- result: %s
- In security_policy_manager::register_rule:
- entry is NULL
- action %lld is invalid
- cannot specify internal service in SPP
- cannot specify default rule in SPP
- access_control_if::add_entry failed:
- In security_policy_manager::load_additional_policy:
- security_policy_manager::initialize is not called
- SCE_CELLOS_SS_SPM
- secure_profile_loader_if::get_contents_size
- new failed
- secure_profile_loader_if::get_contents
- read_size %d != size %d
- In security_policy_manager::load_additional_policy: received acm:
- 0x%02x
- In security_policy_manager::
- load_additional_policy:
- register_rule failed: ret = %d
- access_control_if::cancel_changes
- access_control_if::commit_changes failed:
- In security_policy_manager::load_internal_policy:
- already initialized. why call me?
- m_internal is NULL
- access_control_if::initialize failed:
- load_internal_policy:
- register_rule failed,
- access_control_if::commit_changes
- In security_policy_manager::initialize:
- initialize is already called
- security_policy_manager::load_internal_policy
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- timeout occured
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- In entry::remove_from_queue: head() returns NULL
- In entry::remove_from_queue: not found
- In entry::remove_from_mngq:
- listhead must not be NULL
- In entry::remove_from_mngq: not found
- In entry::insert_to_mngq: head must not be NULL
- In entry::insert_to_mngq: already in mngq
- In access_control_if::get_acm_entry_num:
- not initialized
- invalid section: %d
- In access_control_if::cleanup_rule_entry:
- entry::remove_from_mngq failed: ret = %d
- entry::remove_from_queue failed: ret = %d
- access_control_if::get_memory(%d)
- get_memory: no more memory... call pme_malloc()
- In access_control_if::remove_rule_entry_list:
- object_entry::get_rule_entry_list_head failed:
- In access_control_if::
- remove_rule_entry_list:
- entry::insert_to_mngq failed:
- In access_control_if::remove_object_rule_entry:
- access_control_if::remove_rule_entry_list failed:
- In access_control_if::copy_all_rule_of_section:
- oe is NULL
- object_entry::get_rule_entry_list_head
- In access_control_if::get_acm:
- access_control_if::copy_all_rule_of_section
- buffer should not be NULL
- nentry should be greater than or equal to
- %llu
- object_hashtable::get_first_object_entry failed:
- access_control_if::copy_all_rule
- object_hashtable::get_next_object_entry
- In access_control_if::remove_object_entry:
- object_hashtable::get_object_entry failed:
- there is no object in NORMAL state
- access_control_if::
- remove_object_rule_entry failed: ret = %d
- In access_control_if::lookup:
- object_hashtable::get_object_entry
- returns NULL object_entry
- object_entry::match_rule_entry failed:
- In access_control_if::cleanup_object_entry:
- object_hashtable::remove_object_entry failed:
- In access_control_if::register_new_rule: oe is NULL
- In access_control_if::register_new_rule: new failed
- In access_control_if::register_new_rule:
- object_entry::add_rule_entry failed: ret = %d
- entry::insert_to_mngq failed: ret = %d
- section broken?
- In access_control_if::register_new_object:
- oe is not NULL
- object_hashtable::add_object_entry failed:
- In access_control_if::add_entry:
- entry must not NULL
- mask should not be {0, 0}
- if the section is PRIMARY, SECONDARY
- or TERTIARY
- mask should be {0, 0}
- if the section is DEFAULT
- access_control_if::register_new_object
- In access_control_if::add_entry: oe is NULL
- access_control_if::register_new_rule failed:
- In access_control_if::initialize:
- already initialized
- expected_object_num should not be 0
- object_hashtable::initialize failed:
- In access_control_if::initialize: initialized
- In access_control_if::initialize: new failed
- In access_control_if::remove_entry:
- mask should not be {0, 0}
- In access_control_if::remove_entry: oe is NULL
- object_entry::get_rule_entry failed: ret = %d
- In access_control_if::remove_entry: re is NULL
- there is no rule in NORMAL state
- In access_control_if::add_entry: section broken?
- In access_control_if::remove_all_entry:
- remove_all_entry:
- remove_object_rule_entry failed:
- no rule is registered
- In access_control_if::commit_changes:
- there is no entry
- invalid m_primary_mngq_num:
- invalid m_secondary_mngq_num:
- invalid m_tertiary_mngq_num:
- invalid m_default_mngq_num:
- invalid state (%d) elememnt in mngq
- In access_control_if::cancel_changes:
- In object_entry::get_rule_entry_list_head:
- In object_entry::add_rule_entry:
- elem should not be NULL
- elem is already registered
- In object_hashtable::get_first_object_entry:
- In object_hashtable::get_object_entry:
- In object_hashtable::initialize:
- In object_hashtable::initialize: m_table is NULL
- In object_hashtable::remove_object_entry:
- elem->head() is NULL
- object_entry not found, list is broken?
- In object_hashtable::get_next_object_entry:
- In object_hashtable::add_object_entry:
- DEFAULT.SPP
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- /dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- gloader
- debug
- level
- dispatchdebug
- level
- common
- printf
- enabled
- debug
- level
- param
- bank
- rvkprg
- rvkpkg
- Cyt2.
- flash
- boot
- syscon
- pversion
- z0commlib
- debug
- level
- {0spm
- debug
- policy
- {@level
- {Pss_init
- debug
- level
- {`ac_cntl
- debug
- level
- **********************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- **********************************************************************************
- handler: received non-SIGSPUSTOP signal %d
- sc_manager::instance is NULL
- [ERROR]: sc_init: format error
- sc_manager::set_product_mode failed:
- sc_manager::read_eprom failed:
- create_repository_node failed:
- individual_info_mgr::instance is NULL
- individual_info_mgr::initialize failed: ret = %d
- In read_iso_module:
- config_manager::initialize failed:
- new module_loader failed
- module_loader::load_module failed:
- /rmt/binary_patch.bin
- %s does not exist
- pme_lseek failed (%d)
- pme_memalign failed
- pme_malloc failed
- pme_read failed (%d)
- %d != %d
- spu_mode_auth.self
- cannot load %s
- set_signal_handler failed
- new spulib_pu failed
- request_loading_spu_module failed: ret = %d
- In mode_auth_data_check_with_iso_spu_module: SS_STOP_CODE_SUCCESS is NOT returned!
- In mode_auth_data_check: g_not_sc_initialized == true
- In mode_auth_data_check: sc_manager_if::get_sc_status failed: ret = %d
- In mode_auth_data_check: flag != SC_INIT_FLAG_NON_PRODUCT_MODE
- In mode_auth_data_check: sc_manager_if::read_eprom failed: ret = %d
- In mode_auth_data_check: mode_auth_flag == SC_INIT_MODE_AUTH_DATA_NOT_EXIST
- In mode_auth_data_check: mode_auth_data_check_with_iso_spu_module failed: ret = %d
- [ERROR]: data clear failure,
- try again
- [ERROR]: flag clear failure,
- set mode_auth_data and try again
- In mode_auth_data_check: sc_manager_if::set_sc_status failed: ret = %d
- [ERROR]: data set failure,
- set mode_auth_data and flag, and try again
- [INFO]: product mode authentication data
- verified successfully.
- [INFO]: secure product mode is changed to 0x00.
- [INFO]: shutdown...
- handler: read_spu_status failed (%d)
- process_pumb: read_pu_int_mailbox failed :
- In process_pumb:
- sc_proxy_if::sendrecv failed:
- sr_hdr_p->send_size: %d,
- sr_hdr_p->recv_size: %d
- write_spu_mailbox failed
- In send_start_cmd: size is not 16byte aligned
- new failed
- In send_start_cmd:
- individual_info_mgr_if::get_individual_info_size
- In send_start_cmd: malloc failed
- individual_info_mgr_if::read_individual_info
- request_loading_spu_module failed (%d)
- write_spu_mailbox failed:
- testing SC_ISO_WRITE_BINARY_PATCH
- testing SC_ISO_CORRECT_RTC_FACTORY
- testing SC_ISO_SET_RTC_FACTORY
- invalid size: %d
- testing SC_ISO_SET_RTC
- testing SC_ISO_SET_TIME
- testing SC_ISO_GET_TIME
- >> get current time for ID %d, this must be error
- get_time_test error case failed
- get_time_test type incorrect
- get_time_test: invalid state: 0x%llx
- >> set time as 0
- set_drift_time_test failed
- set_drift_time_test type incorrect
- >> get current time
- get_time_test failed
- time: %lld
- >> set huge time (0xfffffffe)
- time: %lld (0x%llx)
- >> waiting 2 seconds...
- >> get current time, this must be error (overflow)
- checking rtc status by SC_ISO_GET_TIME
- the following SC_ISO_GET_TIME test may be NG,
- but it is no problem
- rtc status OK: in normal state
- rtc status OK: in initial state
- rtc status OK: in normal state (clock overflow)
- rtc status NG: reset RTC now
- set_rtc_test failed
- resetting RTC completed
- rtc status NG: invalid state: 0x%llx
- testing SC_ISO_SET_REGION_DATA
- testing SC_ISO_GET_REGION_DATA
- get_region_data_test failed
- get_region_data_test type incorrect
- set_region_data_test failed
- set_region_data_test type incorrect
- %d / %d characters mismatch
- testing SC_ISO_SET_SC_STATUS
- testing SC_ISO_GET_SC_STATUS
- version: 0x%lx, status: 0x%lx
- testing SC_ISO_INIT_FOR_UPDATER
- verifying SC_ISO_INIT_FOR_UPDATER
- failed: 0x%llx
- testing SC_ISO_INIT_FOR_VTRM
- In sc_init:
- sc_manager_if::get_sc_status failed:
- ret = %d,
- sc_manager_if::read_eprom failed:
- [INFO]: 0x%x = 0x%02x
- [ERROR]: invalid configuration
- In sc_init: flag != SC_INIT_FLAG_NEED_PERSONALIZE
- [ERROR]:
- sc_init FAILED
- [ERROR]: increase memory budget failed
- [ERROR]: sc_init: initialize failed
- [ERROR] sc_init_pu:
- memory shortage
- ss_sc_init.self
- cannot get %s, exiting...
- testing SC_ISO_SET_SRH
- testing SC_ISO_GET_SRH
- get_srh_test failed
- set_srh_test failed
- testing SC_ISO_DECRYPT
- testing SC_ISO_ENCRYPT
- encrypt_test failed
- decrypt_test failed
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- timeout occured
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- restore_root_info: ret[0]: 0x%x
- restore_root_info: ret[1]: 0x%x
- restore_root_info: ret[2]: 0x%x
- backup_root_info: ret[0]: 0x%x
- backup_root_info: ret[1]: 0x%x
- backup_root_info: ret[2]: 0x%x
- correct_rtc_factory: ret[0]: 0x%x
- correct_rtc_factory: ret[1]: 0x%x
- correct_rtc_factory: ret[2]: 0x%x
- set_rtc_factory: ret[0]: 0x%x
- set_rtc_factory: ret[1]: 0x%x
- set_rtc_factory: ret[2]: 0x%x
- sc_binary_patch: ret[0]: 0x%x
- sc_binary_patch: ret[1]: 0x%x
- sc_binary_patch: ret[2]: 0x%x
- set_sc_status: ret[0]: 0x%x
- set_sc_status: ret[1]: 0x%x
- set_sc_status: ret[2]: 0x%x
- get_sc_status: ret[0]: 0x%x
- get_sc_status: ret[1]: 0x%x
- get_sc_status: ret[2]: 0x%x
- get_property: ret[0]: 0x%x
- get_property: ret[1]: 0x%x
- get_property: ret[2]: 0x%x
- init_for_updater: ret[0]: 0x%x
- init_for_updater: ret[1]: 0x%x
- init_for_updater: ret[2]: 0x%x
- init_for_updater: ret[3]: 0x%x
- init_for_updater: ret[4]: 0x%x
- init_for_updater: ret[5]: 0x%x
- write_eprom: ret[0]: 0x%x
- service: 0x%x
- major_version: 0x%x
- minor_version: 0x%x
- ***write using nvs service***
- write_eprom: ret[1]: 0x%x
- offset: 0x%x
- block_id: 0x%x
- block_offset: 0x%x
- write_eprom: ret[2]: 0x%x
- ***write using device_access_service***
- read_eprom: ret[0]: 0x%x
- ***read using nvs service***
- read_eprom: ret[1]: 0x%x
- read_eprom: ret[2]: 0x%x
- ***read using device_access_service***
- set_product_mode: ret[0]: 0x%x
- property: 0x%llx
- set_product_mode: ret[1]: 0x%x
- version: 0x%x
- mode: 0x%x
- set_product_mode: ret[2]: 0x%x
- product mode: 0x%x
- set_product_mode: ret[3]: 0x%llx
- set_rtc: ret[0]: 0x%x
- set_rtc: ret[1]: 0x%x
- set_rtc: ret[2]: 0x%x
- set_time: ret[0]: 0x%x
- set_time: ret[1]: 0x%x
- set_time: ret[2]: 0x%x
- get_time: ret[0]: 0x%x
- get_time: ret[1]: 0x%x
- get_time: ret[2]: 0x%x
- set_region_data: ret[0]: 0x%x
- set_region_data: ret[1]: 0x%x
- set_region_data: ret[2]: 0x%x
- get_region_data: ret[0]: 0x%x
- get_region_data: ret[1]: 0x%x
- get_region_data: ret[2]: 0x%x
- set_srh: ret[0]: 0x%x
- set_srh: ret[1]: 0x%x
- set_srh: ret[2]: 0x%x
- get_srh: ret[0]: 0x%x
- get_srh: ret[1]: 0x%x
- get_srh: ret[2]: 0x%x
- decrypt: ret[0]: 0x%x
- decrypt: ret[1]: 0x%x
- decrypt: ret[2]: 0x%x
- encrypt: ret[0]: 0x%x
- encrypt: ret[1]: 0x%x
- encrypt: ret[2]: 0x%x
- init_for_vtrm: ret[0]: 0x%x
- init_for_vtrm: ret[1]: 0x%x
- init_for_vtrm: ret[2]: 0x%x
- init_for_vtrm: ret[3]: 0x%x
- init_for_vtrm: ret[4]: 0x%x
- init_for_vtrm: ret[5]: 0x%x
- pscm_restore_root_info: get_result: ret[0]: 0x%x
- scm_correct_rtc_factory: get_result: ret[0]: 0x%x
- scm_set_rtc_factory: get_result: ret[0]: 0x%x
- scm_sc_binary_patch: get_result: ret[0]: 0x%x
- scm_set_sc_status: get_result: ret[0]: 0x%x
- scm_init_for_updater: get_result: ret[0]: 0x%x
- scm_set_rtc: get_result: ret[0]: 0x%x
- scm_init_for_vtrm: get_result: ret[0]: 0x%x
- scm_set_srh: get_result: ret[0]: 0x%x
- sc_iso.self
- scm_restore_root_info: run: ret[0]: 0x%x
- scm_backup_root_info: run: ret[0]: 0x%x
- sc_iso_factory.self
- scm_correct_rtc_factory: run: ret[0]: 0x%x
- scm_set_rtc_factory: run: ret[0]: 0x%x
- scm_sc_binary_patch: run: ret[0]: 0x%x
- scm_set_sc_status: run: ret[0]: 0x%x
- scm_get_sc_status: run: ret[0]: 0x%x
- scm_get_property: run: ret[0]: 0x%x
- scm_init_for_updater: run: ret[0]: 0x%x
- scm_set_rtc: run: ret[0]: 0x%x
- scm_set_time: run: ret[0]: 0x%x
- scm_get_time: run: ret[0]: 0x%x
- scm_set_region_data: run: ret[0]: 0x%x
- scm_get_region_data: run: ret[0]: 0x%x
- scm_init_for_vtrm: run: ret[0]: 0x%x
- scm_set_srh: run: ret[0]: 0x%x
- scm_get_srh: run: ret[0]: 0x%x
- scm_decrypt: run: ret[0]: 0x%x
- scm_encrypt: run: ret[0]: 0x%x
- scm_backup_root_info: get_result: ret[0]: 0x%x
- scm_backup_root_info: get_result: ret[1]: 0x%x
- scm_set_time: get_result: ret[0]: 0x%x
- scm_set_time: get_result: ret[1]: 0x%x
- scm_set_time: get_result: id invalid
- scm_get_time: get_result: ret[0]: 0x%x
- scm_get_time: get_result: ret[1]: 0x%x
- scm_get_time: get_result: id invalid
- scm_get_time: get_result: ret[2]: 0x%x
- scm_get_time: get_result: ret[3]: 0x%x
- scm_set_region_data: get_result: ret[0]: 0x%x
- scm_set_region_data: get_result: ret[1]: 0x%x
- scm_set_region_data: get_result: id invalid
- scm_get_region_data: get_result: ret[0]: 0x%x
- scm_get_region_data: get_result: ret[1]: 0x%x
- scm_get_region_data: get_result: id invalid
- scm_get_region_data: get_result: ret[2]: 0x%x
- scm_get_srh: get_result: ret[0]: 0x%x
- scm_get_srh: get_result: ret[1]: 0x%x
- scm_get_srh: get_result: ret[2]: 0x%x
- scm_decrypt: get_result: ret[0]: 0x%x
- scm_decrypt: get_result: ret[1]: 0x%x
- scm_decrypt: get_result: type field invalid
- scm_decrypt: get_result: ret[2]: 0x%x
- scm_decrypt: get_result: ret[3]: 0x%x
- scm_encrypt: get_result: ret[0]: 0x%x
- scm_encrypt: get_result: ret[1]: 0x%x
- scm_encrypt: get_result: type field invalid
- scm_encrypt: get_result: ret[2]: 0x%x
- scm_encrypt: get_result: ret[3]: 0x%x
- scm_get_sc_status: get_result: ret[0]: 0x%x
- scm_get_sc_status: get_result: ret[1]: 0x%x
- scm_get_sc_status: get_result: ret[2]: 0x%x
- status: 0x%x
- scm_get_property: get_result: ret[0]: 0x%x
- scm_get_property: get_result: ret[1]: 0x%x
- send_body_size: 0x%x
- recv_body_size: 0x%x
- packet_size: 0x%x
- get_service_version: ret[0]: 0x%x
- 0x%02x
- recv_size: 0x%x
- recvd_size: 0x%x
- get_service_version: ret[1]: 0x%x
- status: 0x%x
- srecv_service_id: 0x%x
- write_nvs: ret[0]: 0x%x
- write_nvs: ret[1]: 0x%x
- status: 0x%x
- read_nvs: ret[0]: 0x%x
- length: 0x%x
- read_nvs: ret[1]: 0x%x
- size: 0x%x
- start signal handler sputimeout
- recv signal (%d) is SIGSPUTIMEOUT. (r4=%d)
- recv signal (%d) is not SIGSPUTIMEOUT. (r4=%d)
- start signal handler spustopsl
- recv signal (%d) is SIGSPUSTOP_SL. (r4=%d)
- recv signal (%d) is not SIGSPUSTOP_SL. (r4=%d)
- start signal handler spumbsl
- recv signal (%d) is SIGSPUMB_SL. (r4=%d)
- recv signal (%d) is not SIGSPUMB_SL. (r4=%d)
- start signal handler spuerr
- recv signal (%d) is SIGSPUERR. (r4=%d)
- recv signal (%d) is not SIGSPUERR. (r4=%d)
- start signal handler spudma
- recv signal (%d) is SIGSPUDMA. (r4=%d)
- recv signal (%d) is not SIGSPUDMA. (r4=%d)
- start signal handler spustop
- recv signal (%d) is SIGSPUSTOP. (r4=%d)
- recv signal (%d) is not SIGSPUSTOP. (r4=%d)
- start signal handler spumb
- recv signal (%d) is SIGSPUMB. (r4=%d)
- recv signal (%d) is not SIGSPUMB. (r4=%d)
- send DMA data to SPU
- send_abort: ret[0]: 0x%x
- send_success: ret[0]: 0x%x
- received seqno: 0x%x
- received mbmsg: 0x%x
- received cmd: 0x%x
- received cmd_data_size: 0x%x
- check_header: seqno invalid
- check_header: mbmsg invalid
- check_header: command invalid
- check_header: exit data len invalid
- send_data_size: 0x%llx
- recv_data_size: 0x%llx
- buf_size: 0x%x
- sendrecv_process: ret[0]: 0x%x
- sendrecv_process: ret[1]: 0x%x
- check_stop_code: ret[0]: 0x%x
- stopcode: 0x%x
- check_received_data: ret[0]: 0x%x
- received DMA data from SPU
- check_received_data: seqno invalid
- check_received_data: mbmsg invalid
- check_received_data: command invalid
- sc_core: ret[0]: 0x%x
- module_bufp: 0x%x
- module_size: 0x%x
- sc_core: ret[1]: 0x%x
- sc_core: ret[2]: 0x%x
- API start DMA data
- sc_core: ret[3]: 0x%x
- API end DMA data
- sc_sendrecv: ret[0]: 0x%x
- send_data_size: 0x%llx
- sent_data_size: 0x%llx
- recv_data_size: 0x%llx
- recvd_data_size: 0x%llx
- ros0
- ros1
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- read_system_data_from_eeprom: buf_addr == NULL
- metldr
- DEFAULT.SPP
- SCE_CELLOS_SS_INDI_INFO_EID
- metldr
- ###Format1
- ###Format2
- top_toc
- asecure_loader
- eEID
- cISD
- cCSD
- trvk_prg
- trvk_pkg
- cvtrm
- nand_update
- lsp_update
- bdit_firmware
- bdpt_301r_firmware
- bdpt_302r_firmware
- bdpt_303r_firmware
- trvk_prg0
- trvk_prg1
- trvk_pkg0
- trvk_pkg1
- bdpt_304r_firmware
- END_OF_REGION
- SPL:check laid:%lx %lx
- SPL: laid check error:%lx %lx
- SPL:check paid:%lx %lx
- SPL: laid or paid check error: laid:%lx %lx
- paid:%lx %lx
- SPL:get_component index error: %d
- SPL:get_component: get_module_location failure(%d)
- SPL:get_component: file_size:%d offset:%d
- SPL:get_component: %d bytes to read.
- SPL:get_component info.la: %p info.size: %d
- SPL:get_component: mmap(%d)
- SPL:get_component: read %d bytes.
- munmap: %d
- SPL:get_component: munmap(%d)
- SPL:get_component: read(%d)
- SPL:get_component: region size error(%d)
- SPL:get_component: done
- SPL: get_contents: type %lx
- SPL: profile_mgr get faild %d
- SPL: profile not initialized %d
- SPL: get_lpar_parameter_size: %s
- SCE_CELLOS_SYSTEM_MGR
- SPL: get_lpar_parameter: lpar_list fail: %d
- SPL: get_lpar_parameter: lpar_name size : %d
- SPL: get_lpar_parameter: lpar_parameters size : %d
- SPL: get_contents_size: type %lx
- SPL: get_lpar_info: type %d
- SPL: get_lpar_info type error
- SPL: get_lpar_parameter: %s
- SPL: get_lpar_parameter: lpar_info : %s
- SPL: get_lpar_parameter: lpar_info fail: %d
- SPL: get_lpar_parameter:done: %s
- emer_init.self
- SPL:spp header format version error:%d
- SPL:spp header size error:%d
- SPL:spp header align error:%d
- PM:signal: timeout
- ----- signal has arrived -----
- SL:timeout_handler:read_spu_status failed.
- SL:signal: handler_end
- PM:signal: spu err
- SL:err_handler:read_spu_status failed.
- SL:signal: spu dma
- ----- signal spudma -----
- SL:dma_handler:read_spu_status failed.
- spu problem area: %p
- SL:signal: stop and signal
- SL:sigspustop_handler:read_spu_status failed.
- SPU state:%lu
- stop code = %u
- signal result = %p
- PM:verify_profile size:%d
- PM: spp header error %d
- PM:fileloader load spu_module faild: %d
- PM:fileloader spu_module get_buffer faild: %d
- PM:fileloader get spu module size faild: %d
- PM: spu request done
- PM:verify_profile:request_loading_spu_module failure %d
- sleep...
- PM:verify spp finish
- PM:SIGSPUDMA: error
- PM:SIGSPUERR: error
- PM:SIGSPUTIMEOUT: error
- PM:verify_profile finish:%d size:%lu
- PM: delete_profile: %s
- PM:fileloader load faild: %d
- PM:fileloader get_buffer faild: %d
- PM:fileloader get_size faild: %d
- spu_filename:%s
- PM: verify profile failed %d
- PM: free buffer for load_profile
- PM:stored spp:%s,
- requested spp:%s
- PM: flash_id: %d, flash_top_offset: %d
- get_repository_node_value failed:
- PM:has prof:%s
- PM:load prof:%s
- PM: load faild:%d %s
- /flh/os/spp_verifier.self
- /rmt/default.spp
- /flh/os/default.spp
- FL:vfs open error:%d :toolong
- FL:vfs open error:%d :errno:%d
- FL:vfs size error:%d
- FL:lseek fail, and close fail:fd: %d
- SL:allocate fail:size(%d)
- FL:close fail:fd: %d
- FL: vfs seek error:%d
- FL: vfs size error:%d
- FL:size error:%d %d
- FL:file loaded :%d
- FL: conf_mgr init err
- offset:%d size: %d
- FL:read error:%d
- /flh/os/
- FL: release_buffer for pme_malloc
- FL: malloc :size %lu
- /rmt
- /local_sys0
- /flh
- * map data buffer:
- /proc/partitions/%d/mem
- couldn't open file...(%s)
- mapped address: %p
- mmap failed: errno = %d
- close error:%d
- spp:data size error:%lu
- spp:contents size is too big:%lu
- spp: segment size exceed whole data size error
- error seg_size is too large
- spp: new for contents[] failed
- spp:create_contents error. %d
- spp: release: seg_num %d
- spp: seg %d ct %d released
- spp: seg %d cts released
- spp: segs released
- spp: all segments released
- spp: released
- spp: create: has data %d
- spp: create: start create
- spp: create: null buffer
- spp: create: too small
- spp: version error: (%d)
- spp:segment seg_num error: %lu
- spp:create:new segments[]: %d
- spp: new for segments[] failed
- spp: create new segment: %d
- spp:create segment:%d : error
- spp:create: total data length check error
- spp:get_contents: nodata %d
- spp:get_contents: invalid type:%d
- spp:skip type:%d
- spp:get_contents: not found: type %d
- total seg_num:%d
- seg:%d
- sc_proxy_if::sendrecv
- (%d, 0x%x, %d, %d,
- %d, %d, %d)
- In sc_proxy_if::sendrecv:
- id should be %d
- buf_addr should not be NULL
- send_size should be greater than 0
- recv_size should be greater than 0
- buf_size should not be smaller than
- send_buf or recv_buf
- /dev/sc3
- sc_proxy::open failed: ret = %d
- sc_proxy::write failed: ret = %d
- In sc_proxy_if::sendrecv: sc_proxy::close failed: ret = %d
- sc_proxy::read failed: ret = %d
- sc_proxy::close failed: ret = %d
- In sc_proxy::close: close failed: ret = %d, errno = %d
- In timeout_handler of sc_proxy: invalid signal %d
- In sc_proxy::write: buf should not be NULL
- In sc_proxy::write: nbytes should be greater than 0
- In sc_proxy::write: config_manager::initialize failed: ret = %d
- In sc_proxy::write: workaround for SC firmware bug
- In sc_proxy::write: write failed: ret = %d, errno = %d
- In sc_proxy::read: buf should not be NULL
- In sc_proxy::read: nbytes should be greater than 0
- In sc_proxy::read: signal failed
- In sc_proxy::read: old_timeout: %d
- In sc_proxy::read: read failed: ret = %d, errno = %d
- In sc_proxy::open: flags should be O_RDWR
- In sc_proxy::open: open failed: ret = %d, errno = %d
- capability_checker::check_product_mode_capability: OK
- capability_checker::check_product_mode_capability: NG
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- P/dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- sc_test
- debug
- level
- (param
- product
- mode
- common
- printf
- enabled
- debug
- level
- zxss_init
- debug
- level
- sc_iso
- debug
- level
- sc_mngr
- param
- product
- mode
- param
- bank
- rvkprg
- rvkpkg
- {(ii_mgr
- debug
- level
- param
- load
- rom1st
- |4ploader
- debug
- level
- |@sc_proxydebug
- level
- |HCyt2.
- flash
- boot
- syscon
- pversion
- ac_cntl
- debug
- level
- param
- product
- mode
- commlib
- debug
- level
- *************************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- *****************************************************************************************
- ss_init_if::notify_failure failed:
- ret = %d
- ss_init_if::notify_ready failed:
- correct_rtc_factory: ret[0]: 0x%x
- set_rtc_factory: ret[0]: 0x%x
- get_driveinit_key2: ret[0]: 0x%x
- get_driveinit_key2: ret[1]: 0x%x
- get_driveinit_key2: ret[2]: 0x%x
- get_driveinit_key1: ret[0]: 0x%x
- get_driveinit_key1: ret[1]: 0x%x
- get_driveinit_key1: ret[2]: 0x%x
- fdm_get_driveinit_key2: get_result: ret[0]: 0x%x
- fdm_get_driveinit_key1: get_result: ret[0]: 0x%x
- fdm_get_driveinit_key2: run: ret[0]: 0x%x
- fdm_get_driveinit_key1: run: ret[0]: 0x%x
- fdm_get_driveinit_key2: setup: ret[0]: 0x%x
- fdm_get_driveinit_key1: setup: ret[0]: 0x%x
- 0x%02x
- fdm_core: SIGSPUTIMEOUT caught(not desired)
- fdm_core: SIGSPUERR caught(not desired)
- fdm_core: SIGSPUDMA caught(not desired)
- fdm_core: SIGSPUSTOP_SL caught(not desired)
- fdm_core: SIGSPUSTOP caught
- fdm_core: SIGSPUMB_SL caught(not desired)
- fdm_core: SIGSPUMB caught(not desired)
- m_dma_bufp: 0x%llx
- m_dma_size: 0x%x
- fdm_core_process: ret[0]: 0x%x
- fdm_spu_module.self
- fdm_core_process: ret[1]: 0x%x
- module_bufp: 0x%x
- module_size: 0x%x
- fdm_core_process: ret[2]: 0x%x
- fdm_core_process: eid_size > FDM_DMA_SIZE
- eid_bufp: 0x%llx
- eid_size: 0x%x
- fdm_core_process: ret[3]: 0x%x
- eid_size: 0x%x
- eid_read_size: 0x%x
- EID data(encrypt)
- fdm_core_process: ret[4]: 0x%x
- fdm_core_process: ret[5]: 0x%x
- signal_type: 0x%x
- fdm_core_process: ret[6]: 0x%x
- stop_code: 0x%x
- ros0
- ros1
- OS_BANK:0x%llx, 0x%llx
- OS_BANK repository error:0x%llx
- PRG_RVK_BANK:0x%llx, 0x%llx
- PRG_RVK_BANK repository error:0x%llx
- PKG_RVK_BANK:0x%llx, 0x%llx
- PKG_RVK_BANK repository error:0x%llx
- bank_manager::get_repository_value(m_type = %d)
- settle value mismatched. 0x%llx : 0x%llx
- bank_manager::setup(%d)
- bank repository found
- bank repository not found
- composite_region::read(0x%llx, %lld, 0x%llx)
- composite_region::allocate_buffer(%lld)
- composite_region::release_buffer(0x%llx)
- composite_region::cache_all_composite_region_entry()
- offset = %d
- header is not cached
- entry is not cached
- composite_region::get_composite_region_entry_by_index(%d, 0x%llx)
- composite_region::writev()
- blksize = 0x%llx, mask = 0x%llx
- iovec[%d].offset = 0x%llx
- iovec[%d].size = 0x%llx
- iovec[%d].buf = 0x%llx
- [%d] align_offset = 0x%llx
- writev(): flush previous data (0x%llx)
- writev(): read initial data (0x%llx)
- writev(): flush last data (0x%llx)
- !!! if_proto::send_receive error : cannot find port ID for function_id=0x%x
- # if_proto::send_receive : port_id=%llu
- !!! if_proto::send_receive error : cannot connect port=%u
- # ss_responder::terminate
- # ss_responder::initialize
- !!! ss_responder::initialize : failed
- !!! port_id=%llu, return=%u
- # ss_responder::initialize : port_id=%d, socket=%d
- # ss_responder::loop_once : sock=%d
- # port_id_table::function_id2port_id : func ID=0x%llx, portid=0x%llx
- read_nbytes : read errno=%d
- read_nbytes : unexpected EOF.
- # pme_client::receive : PID=%u
- write_nbytes : write errno=%d
- write : unexpected EOF.
- # pme_client::disconnect : PID=%u
- !!! pme_client::disconnect : close failed (errno=%d)
- # pme_client::connect : PID=%u, portid=%u
- !!! pme_client:connect : socket failed (errno=%d)
- !!! pme_client::connect : connect failed (port_id=%u, errno=%d)
- # pme_client::send : PID=%u
- # pme_server::disconnect : PID=%u
- !!! pme_server::disconnect : close failed (errno=%d)
- # pme_server::force_close : PID=%u
- # pme_server::reply : PID=%u
- !!! pme_server::reply : close failed (errno=%d)
- # pme_server::accept : PID=%u
- !!! pme_server::accept : accept failed (errno=%d)
- !!! pme_server::accept : read_nbytes failed (return=%d)
- # pme_server::connect : PID=%u, port_id=%u
- !!! pme_server::connect : socket failed (errno=%d)
- !!! pme_server::connect : bind failed (errno=%d)
- !!! pme_server::connect : listen failed (errno=%d)
- !!! page_bytestring::free_page : unmap_pages failed, page_addr=%p
- !!! page_bytestring::alloc_page : map_pages failed, page_num=%u
- packet_id: 0x%llx
- function_id: 0x%llx
- retval: 0x%x
- subject_id: (0x%llx,0x%llx)
- # ss_packet::send_receive (CLIENT) : func_id=0x%llx, packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- # ss_packet::process_async : packet_id=0x%llx
- # ss_packet::process_received (SERVER) : sock=%d
- !!! ss_packet::process_received (SERVER) error: packet format error (broken?)
- # ss_packet::process_received (SERVER) : packet_id=0x%llx, subject_id=(0x%llx,0x%llx)
- !!! ss_packet::process_received (SERVER) error: unknown packet
- # ss_packet::process_received (SERVER) error: port table inconsistent
- # ss_packet::accept_reply : accept done. sock=%d
- In ss_init_repository::get_node_value:
- name: {
- 0x%llx,
- 0x%llx}
- timeout occured
- get_repository_node_value succeeded
- value: {
- In ss_init_repository::get_node_value:
- remove_repository_node failed
- In ss_init_repository::create_node:
- creating...
- create_repository_node succeeded
- In ss_init_repository::create_node:
- create_repository_node failed
- 0123456789abcdef
- 0123456789ABCDEF
- (null)
- max system bytes = %10lu
- system bytes = %10lu
- in use bytes = %10lu
- capability_checker::check_product_mode_capability: OK
- capability_checker::check_product_mode_capability: NG
- /dev/rflash
- /dev/eflash
- /_init_storage/
- /dev/flash_num
- Elfdm_iso
- debug
- level
- Exfdm
- Cyt2.
- flash
- boot
- syscon
- pversion
- param
- bank
- rvkprg
- rvkpkg
- F8commlib
- debug
- level
- ss_init
- debug
- level
- common
- printf
- enabled
- debug
- level
- MPac_cntl
- debug
- level
- MHparam
- product
- mode
- ******************************************************************************
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- GCC: (GNU) 4.1.1 (CELL 4.1.2.7, $Rev: 2461 $)
- .shstrtab
- .text
- .rodata
- .ctors
- .dtors
- .data.rel.ro
- .data
- .opd
- .got
- .bss
- .comment
- tZ0 U
- 0v4<
- {+RA
- !F9U'7
- .unknown
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement