Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE-p5 #0: Tue Jan  3 03:27:19 PST 2012
    [email protected]:/build/home/gcooper/e2e-bld.RqwJtDXy/obj.i386/i386/build/home/gcooper/e2e-bld.RqwJtDXy/FreeBSD/src/sys/FREENAS.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf4a  Family = f  Model = 4  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2088599552 (1991 MB)
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
aac0: <Adaptec SATA RAID 2020SA ZCR> mem 0xd5000000-0xd5ffffff,0xd4200000-0xd43fffff,0xdc000000-0xdfffffff irq 48 at device 2.0 on pci2
aac0: Enable Raw I/O
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Adaptec 2020SA, aac driver 2.1.9-1
aacp0: <SCSI Passthrough Bus> on aac0
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x2000-0x203f mem 0xd6000000-0xd601ffff irq 24 at device 1.0 on pci6
em0: [FILTER]
em0: Ethernet address: 00:30:48:78:ac:0e
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x2040-0x207f mem 0xd6020000-0xd603ffff irq 25 at device 2.0 on pci6
em1: [FILTER]
em1: Ethernet address: 00:30:48:78:ac:0f
uhci0: <UHCI (generic) USB controller> port 0x1400-0x141f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x1420-0x143f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <UHCI (generic) USB controller> on uhci1
pci0: <base peripheral> at device 29.4 (no driver attached)
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xd4001400-0xd40017ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 6300ESB USB 2.0 controller> on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd7000000-0xd7ffffff,0xd6100000-0xd6100fff irq 16 at device 1.0 on pci7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1470-0x147f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xcf800-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Timecounters tick every 1.000 msec
aacd0: <Volume> on aac0
aacd0: 715350MB (1465036800 sectors)
aacd1: <Volume> on aac0
aacd1: 715350MB (1465036800 sectors)
aacd2: <Volume> on aac0
aacd2: 715350MB (1465036800 sectors)
aacd3: <Volume> on aac0
aacd3: 715350MB (1465036800 sectors)
aacd4: <Volume> on aac0
aacd4: 476906MB (976705408 sectors)
aacd5: <Volume> on aac0
aacd5: 715350MB (1465036800 sectors)
aacd6: <Volume> on aac0
aacd6: 715350MB (1465036800 sectors)
aacd7: <Volume> on aac0
aacd7: 476906MB (976705408 sectors)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ada0 at ata0 bus 0 scbus1 target 0 lun 0
ada0: <ST3808110AS 3.AAE> ATA-7 SATA 2.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
pass0 at aacp0 bus 0 scbus0 target 0 lun 0
pass0: <ST375033 0AS SD45> Fixed Uninstalled SCSI-2 device
pass0: 3.300MB/s transfers
pass1 at aacp0 bus 0 scbus0 target 1 lun 0
pass1: <ST375033 0AS SD45> Fixed Uninstalled SCSI-2 device
pass1: 3.300MB/s transfers
pass2 at aacp0 bus 0 scbus0 target 2 lun 0
pass2: <ST375064 0AS 3.AA> Fixed Uninstalled SCSI-2 device
pass2: 3.300MB/s transfers
pass3 at aacp0 bus 0 scbus0 target 3 lun 0
pass3: <ST375064 0AS 3.AA> Fixed Uninstalled SCSI-2 device
pass3: 3.300MB/s transfers
pass4 at aacp0 bus 0 scbus0 target 4 lun 0
pass4: <SAMSUNG HD501LJ CR10> Fixed Uninstalled SCSI-2 device
pass4: 3.300MB/s transfers
pass5 at aacp0 bus 0 scbus0 target 5 lun 0
pass5: <SAMSUNG HD501LJ CR10> Fixed Uninstalled SCSI-2 device
pass5: 3.300MB/s transfers
pass6 at aacp0 bus 0 scbus0 target 6 lun 0
pass6: <ST375064 0AS 3.AA> Fixed Uninstalled SCSI-2 device
pass6: 3.300MB/s transfers
pass7 at aacp0 bus 0 scbus0 target 7 lun 0
pass7: <Hitachi HUA721075KLA330 GK8O> Fixed Uninstalled SCSI-2 device
pass7: 3.300MB/s transfers
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ufs/FreeNASs1a
WARNING: /data was not properly dismounted
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 4
ZFS storage pool version 15