Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ########## wireless info START ##########
- ##### release #####
- Distributor ID: Ubuntu
- Description: Ubuntu 13.10
- Release: 13.10
- Codename: saucy
- ##### kernel #####
- Linux ur92-Ubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
- ##### lspci #####
- 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
- Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136]
- Kernel driver in use: r8169
- 05:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] (rev 22)
- Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199]
- Kernel driver in use: r8180
- ##### lsusb #####
- Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Bus 001 Device 003: ID 0cf2:6238 ENE Technology, Inc.
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 003 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- ##### PCMCIA Card Info #####
- ##### rfkill #####
- ##### iw reg get #####
- country 00:
- (2402 - 2472 @ 40), (3, 20)
- (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
- (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- ##### interfaces #####
- # interfaces(5) file used by ifup(8) and ifdown(8)
- auto lo
- iface lo inet loopback
- ##### iwconfig #####
- wlan0 802.11b/g ..... ESSID:"BnE"
- Mode:Managed Channel=19 Access Point: <MAC address removed>
- Bit Rate=54 Mb/s
- Retry min limit:7 RTS thr:off Fragment thr:off
- Power Management:off
- Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm
- Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
- Tx excessive retries:0 Invalid misc:0 Missed beacon:0
- ##### route #####
- Kernel IP routing table
- Destination Gateway Genmask Flags Metric Ref Use Iface
- ##### resolv.conf #####
- ##### nm-tool #####
- NetworkManager Tool
- State: disconnected
- - Device: wlan0 ----------------------------------------------------------------
- Type: 802.11 WiFi
- Driver: r8180
- State: disconnected
- Default: no
- HW Address: <MAC address removed>
- Capabilities:
- Wireless Properties
- WEP Encryption: yes
- WPA Encryption: yes
- WPA2 Encryption: yes
- Wireless Access Points
- tal_the_queen: Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 82 WEP
- 012-super: Infra, <MAC address removed>, Freq 2452 MHz, Rate 54 Mb/s, Strength 67 WPA WPA2
- yaniv: Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 62 WEP
- Tiki: Infra, <MAC address removed>, Freq 2427 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2
- Marina: Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 62 WPA WPA2
- apsela: Infra, <MAC address removed>, Freq 2437 MHz, Rate 54 Mb/s, Strength 64 WEP
- BnE mobile: Infra, <MAC address removed>, Freq 2462 MHz, Rate 54 Mb/s, Strength 62 WPA2
- eyal: Infra, <MAC address removed>, Freq 2412 MHz, Rate 54 Mb/s, Strength 74 WPA WPA2
- BnE: Infra, <MAC address removed>, Freq 2472 MHz, Rate 54 Mb/s, Strength 84 WPA WPA2
- - Device: eth0 -----------------------------------------------------------------
- Type: Wired
- Driver: r8169
- State: unavailable
- Default: no
- HW Address: <MAC address removed>
- Capabilities:
- Carrier Detect: yes
- Wired Properties
- Carrier: off
- ##### NetworkManager.state #####
- [main]
- NetworkingEnabled=true
- WirelessEnabled=true
- WWANEnabled=true
- WimaxEnabled=true
- ##### NetworkManager.conf #####
- [main]
- plugins=ifupdown,keyfile,ofono
- dns=dnsmasq
- no-auto-default=<MAC address removed>,
- [ifupdown]
- managed=false
- ##### iwlist #####
- No way to aquire root rights found.
- ##### iwlist channel #####
- wlan0 14 channels in total; available frequencies :
- Channel 01 : 2.412 GHz
- Channel 02 : 2.417 GHz
- Channel 03 : 2.422 GHz
- Channel 04 : 2.427 GHz
- Channel 05 : 2.432 GHz
- Channel 06 : 2.437 GHz
- Channel 07 : 2.442 GHz
- Channel 08 : 2.447 GHz
- Channel 09 : 2.452 GHz
- Channel 10 : 2.457 GHz
- Channel 11 : 2.462 GHz
- Current Channel:19
- ##### lsmod #####
- r8187se 175957 0
- eeprom_93cx6 13344 1 r8187se
- ##### modinfo #####
- filename: /lib/modules/3.11.0-12-generic/kernel/drivers/staging/rtl8187se/r8187se.ko
- description: Linux driver for Realtek RTL8187SE WiFi cards
- author: Andrea Merello <andreamrl@tiscali.it>
- license: GPL
- license: GPL
- author: Copyright (C) 2004 Intel Corporation <jketreno@linux.intel.com>
- description: 802.11 data/management/control stack
- license: GPL
- description: HostAP crypto
- author: Jouni Malinen
- license: GPL
- description: Host AP crypt: TKIP
- author: Jouni Malinen
- license: GPL
- description: Host AP crypt: CCMP
- author: Jouni Malinen
- license: GPL
- description: Host AP crypt: WEP
- author: Jouni Malinen
- srcversion: 012BD49054A9B4D84150AD1
- alias: pci:v000010ECd00008199sv*sd*bc*sc*i*
- depends: eeprom_93cx6
- staging: Y
- intree: Y
- vermagic: 3.11.0-12-generic SMP mod_unload modversions
- parm: ifname:string
- parm: hwwep: Try to use hardware WEP support. Still broken and not available on all cards (int)
- ##### modules #####
- lp
- rtc
- ##### blacklist #####
- [/etc/modprobe.d/blacklist-ath_pci.conf]
- blacklist ath_pci
- [/etc/modprobe.d/blacklist.conf]
- blacklist evbug
- blacklist usbmouse
- blacklist usbkbd
- blacklist eepro100
- blacklist de4x5
- blacklist eth1394
- blacklist snd_intel8x0m
- blacklist snd_aw2
- blacklist i2c_i801
- blacklist prism54
- blacklist bcm43xx
- blacklist garmin_gps
- blacklist asus_acpi
- blacklist snd_pcsp
- blacklist pcspkr
- blacklist amd76x_edac
- ##### udev rules #####
- # PCI device 0x10ec:0x8136 (r8169)
- SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
- # PCI device 0x10ec:0x8199 (r8180)
- SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
- ##### dmesg #####
- [ 19.419452] r8187se: module is from the staging directory, the quality is unknown, you have been warned.
- [ 19.422167] r8187se:
- [ 19.422184] r8187se: Copyright (c) 2004-2005, Andrea Merello
- [ 19.422190] r8180: Initializing module
- [ 19.422195] r8180: Wireless extensions version 22
- [ 19.422200] r8180: Initializing proc filesystem
- [ 19.422312] r8180: Configuring chip resources
- [ 19.427402] rtl8180_init:Error channel plan! Set to default.
- [ 19.427417] r8180: Channel plan is 0
- [ 19.427440] r8180: MAC controller is a RTL8187SE b/g
- [ 19.429681] r8180: usValue is 0x100
- [ 19.469073] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
- [ 19.470248] r8180: IRQ 18
- [ 19.471069] r8180: Driver probe completed
- [ 24.613464] r8180: Bringing up iface
- [ 24.812522] r8180: Card successfully reset
- [ 25.551771] r8180: WIRELESS_MODE_G
- [ 25.572217] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 25.573206] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 25.689924] r8180: Bringing up iface
- [ 25.888579] r8180: Card successfully reset
- [ 26.625830] r8180: WIRELESS_MODE_G
- [ 26.640081] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 26.684211] r8180: Bringing up iface
- [ 26.882787] r8180: Card successfully reset
- [ 27.620572] r8180: WIRELESS_MODE_G
- [ 27.634831] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 52.341303] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 482.261434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 9984.973102] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [10441.576158] In rtl8180_set_chan: Invalid chnanel 15
- [10444.148106] In rtl8180_set_chan: Invalid chnanel 19
- ########## wireless info END ############
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement