Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13 (jkroon@skeletor.snake) (gcc version 4.7.2 (GCC) ) #1 SMP Sat Jun 22 00:24:52 CEST 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 65280
- [ 0.000000] free_area_init_node: node 0, pgdat c068cd80, node_mem_map c06e8000
- [ 0.000000] Normal zone: 512 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 64768 pages, LIFO batch:15
- [ 0.000000] AM335X ES1.0 (neon )
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c08f6000 s9408 r8192 d15168 u32768
- [ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
- [ 0.000000] Kernel command line: console=ttyO0,115200n8 drm.debug=255 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] allocated 524288 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 255MB = 255MB total
- [ 0.000000] Memory: 251156k/251156k available, 10988k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05d9948 (5959 kB)
- [ 0.000000] .init : 0xc05da000 - 0xc061b4c0 ( 262 kB)
- [ 0.000000] .data : 0xc061c000 - 0xc068dca0 ( 456 kB)
- [ 0.000000] .bss : 0xc068dca0 - 0xc06e76bc ( 359 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
- [ 0.000000] Total of 128 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000369] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
- [ 0.015414] pid_max: default: 32768 minimum: 301
- [ 0.015656] Security Framework initialized
- [ 0.015754] Mount-cache hash table entries: 512
- [ 0.026295] Initializing cgroup subsys cpuacct
- [ 0.026329] Initializing cgroup subsys memory
- [ 0.026395] Initializing cgroup subsys blkio
- [ 0.026536] CPU: Testing write buffer coherency: ok
- [ 0.027094] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.027235] Setting up static identity map for 0x803746b8 - 0x80374704
- [ 0.028596] Brought up 1 CPUs
- [ 0.028620] SMP: Total of 1 processors activated (545.07 BogoMIPS).
- [ 0.029945] devtmpfs: initialized
- [ 0.094775] pinctrl core: initialized pinctrl subsystem
- [ 0.094997] rstctl core: initialized rstctl subsystem
- [ 0.095556] regulator-dummy: no parameters
- [ 0.096070] NET: Registered protocol family 16
- [ 0.096900] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.106758] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- [ 0.107589] platform 49000000.edma: alias fck already exists
- [ 0.107624] platform 49000000.edma: alias fck already exists
- [ 0.107652] platform 49000000.edma: alias fck already exists
- [ 0.108801] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
- [ 0.108977] OMAP GPIO hardware version 0.1
- [ 0.110397] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
- [ 0.111706] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
- [ 0.112981] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
- [ 0.118624] platform 4830e000.fb: alias fck already exists
- [ 0.119111] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.121248] cpsw.0: No hwaddr in dt. Using d4:94:a1:35:b1:3c from efuse
- [ 0.121281] cpsw.1: No hwaddr in dt. Using d4:94:a1:35:b1:3d from efuse
- [ 0.135466] bio: create slab <bio-0> at 0
- [ 0.147190] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
- [ 0.147419] of_get_named_gpio_flags: can't parse gpios property
- [ 0.147654] vmmcsd_fixed: 3300 mV
- [ 0.150441] SCSI subsystem initialized
- [ 0.150859] usbcore: registered new interface driver usbfs
- [ 0.150969] usbcore: registered new interface driver hub
- [ 0.151267] usbcore: registered new device driver usb
- [ 0.153341] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- [ 0.154931] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
- [ 0.157174] DCDC1: at 1800 mV
- [ 0.158382] vdd_mpu: 925 <--> 1325 mV at 1100 mV
- [ 0.159493] vdd_core: 925 <--> 1150 mV at 1100 mV
- [ 0.160667] LDO1: at 1800 mV
- [ 0.161742] LDO2: at 3300 mV
- [ 0.162862] LDO3: 1800 <--> 3300 mV at 3300 mV
- [ 0.164021] LDO4: at 3300 mV
- [ 0.165017] tps65217 0-0024: TPS65217 ID 0xf version 1.1
- [ 0.165734] omap_i2c 44e0b000.i2c: unable to select pin group
- [ 0.166553] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
- [ 0.168931] omap_i2c 4819c000.i2c: unable to select pin group
- [ 0.169152] media: Linux media interface: v0.10
- [ 0.169254] Linux video capture interface: v2.00
- [ 0.170079] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.171319] Switching to clocksource gp_timer
- [ 0.189358] NET: Registered protocol family 2
- [ 0.190380] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.190471] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
- [ 0.190562] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.190658] TCP: reno registered
- [ 0.190686] UDP hash table entries: 256 (order: 1, 12288 bytes)
- [ 0.190733] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- [ 0.191220] NET: Registered protocol family 1
- [ 0.191787] RPC: Registered named UNIX socket transport module.
- [ 0.191807] RPC: Registered udp transport module.
- [ 0.191821] RPC: Registered tcp transport module.
- [ 0.191835] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.192850] CPU PMU: probing PMU on CPU 0
- [ 0.192979] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.193483] omap2_mbox_probe: platform not supported
- [ 0.197464] VFS: Disk quotas dquot_6.5.2
- [ 0.197704] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.198972] NFS: Registering the id_resolver key type
- [ 0.199092] Key type id_resolver registered
- [ 0.199109] Key type id_legacy registered
- [ 0.199177] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.199632] msgmni has been set to 490
- [ 0.202539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.202568] io scheduler noop registered
- [ 0.202584] io scheduler deadline registered
- [ 0.202634] io scheduler cfq registered (default)
- [ 0.204308] tps65217-bl tps65217-bl: no platform data provided
- [ 0.204348] tps65217-bl: probe of tps65217-bl failed with error -22
- [ 0.205338] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.207893] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
- [ 0.208190] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
- [ 0.900690] console [ttyO0] enabled
- [ 0.905386] [drm] Initialized drm 1.1.0 20060810
- [ 0.910276] [drm:tda998x_init],
- [ 0.923742] brd: module loaded
- [ 0.933903] loop: module loaded
- [ 0.937352] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 0.944641] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 0.951917] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 0.959192] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 0.966466] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- [ 0.980781] bone-capemgr bone_capemgr.8: Baseboard: 'A335BONE,00A5,2412\FF\FF000149'
- [ 0.988565] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone
- [ 1.995962] omap_i2c 4819c000.i2c: controller timed out
- [ 3.005480] omap_i2c 4819c000.i2c: controller timed out
- [ 3.017148] bone-capemgr bone_capemgr.8: slot #0: No cape found
- [ 4.023217] omap_i2c 4819c000.i2c: controller timed out
- [ 5.034727] omap_i2c 4819c000.i2c: controller timed out
- [ 5.046442] bone-capemgr bone_capemgr.8: slot #1: No cape found
- [ 6.052466] omap_i2c 4819c000.i2c: controller timed out
- [ 7.064027] omap_i2c 4819c000.i2c: controller timed out
- [ 7.075740] bone-capemgr bone_capemgr.8: slot #2: No cape found
- [ 8.081747] omap_i2c 4819c000.i2c: controller timed out
- [ 9.093324] omap_i2c 4819c000.i2c: controller timed out
- [ 9.105036] bone-capemgr bone_capemgr.8: slot #3: No cape found
- [ 9.111465] bone-capemgr bone_capemgr.8: initialized OK.
- [ 9.119097] OneNAND driver initializing
- [ 9.124656] usbcore: registered new interface driver asix
- [ 9.130472] usbcore: registered new interface driver cdc_ether
- [ 9.136708] usbcore: registered new interface driver smsc95xx
- [ 9.142819] usbcore: registered new interface driver net1080
- [ 9.148840] usbcore: registered new interface driver cdc_subset
- [ 9.155127] usbcore: registered new interface driver zaurus
- [ 9.161128] usbcore: registered new interface driver cdc_ncm
- [ 9.167917] usbcore: registered new interface driver cdc_acm
- [ 9.173880] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 9.182268] Initializing USB Mass Storage driver...
- [ 9.187504] usbcore: registered new interface driver usb-storage
- [ 9.193810] USB Mass Storage support registered.
- [ 9.198862] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
- [ 9.205544] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
- [ 9.210790] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
- [ 9.219562] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 9.219584] musb-hdrc: MHDRC RTL version 2.0
- [ 9.219599] musb-hdrc: setup fifo_mode 4
- [ 9.219628] musb-hdrc: 28/31 max ep, 16384/16384 memory
- [ 9.219774] musb-hdrc musb-hdrc.0.auto: *** mode=3
- [ 9.224822] musb-hdrc musb-hdrc.0.auto: *** power=250
- [ 9.230841] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
- [ 9.236093] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
- [ 9.244864] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 9.244884] musb-hdrc: MHDRC RTL version 2.0
- [ 9.244899] musb-hdrc: setup fifo_mode 4
- [ 9.244921] musb-hdrc: 28/31 max ep, 16384/16384 memory
- [ 9.245050] musb-hdrc musb-hdrc.1.auto: *** mode=1
- [ 9.250094] musb-hdrc musb-hdrc.1.auto: *** power=250
- [ 9.255404] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- [ 9.261816] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
- [ 9.270062] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
- [ 9.270176] usb usb1: default language 0x0409
- [ 9.270237] usb usb1: udev 1, busnum 1, minor = 0
- [ 9.270261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 9.277394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.284970] usb usb1: Product: MUSB HDRC host driver
- [ 9.290186] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
- [ 9.295856] usb usb1: SerialNumber: musb-hdrc.1.auto
- [ 9.301806] usb usb1: usb_probe_device
- [ 9.301835] usb usb1: configuration #1 chosen from 1 choice
- [ 9.301903] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 9.302120] hub 1-0:1.0: usb_probe_interface
- [ 9.302143] hub 1-0:1.0: usb_probe_interface - got id
- [ 9.302172] hub 1-0:1.0: USB hub found
- [ 9.306249] hub 1-0:1.0: 1 port detected
- [ 9.310418] hub 1-0:1.0: standalone hub
- [ 9.310438] hub 1-0:1.0: individual port power switching
- [ 9.310456] hub 1-0:1.0: no over-current protection
- [ 9.310474] hub 1-0:1.0: Single TT
- [ 9.310495] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 9.310515] hub 1-0:1.0: power on to power good time: 10ms
- [ 9.310560] hub 1-0:1.0: local power source is good
- [ 9.310672] hub 1-0:1.0: enabling power on all ports
- [ 9.311766] mousedev: PS/2 mouse device common for all mice
- [ 9.320187] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
- [ 9.327964] i2c /dev entries driver
- [ 9.333266] Driver for 1-wire Dallas network protocol.
- [ 9.340113] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- [ 9.347684] cpuidle: using governor ladder
- [ 9.352011] cpuidle: using governor menu
- [ 9.356503] of_get_named_gpio_flags: can't parse gpios property
- [ 9.356522] of_get_named_gpio_flags: can't parse gpios property
- [ 9.356538] of_get_named_gpio_flags: can't parse gpios property
- [ 9.356576] omap_hsmmc mmc.3: of_parse_phandle_with_args of 'reset' failed
- [ 9.363818] omap_hsmmc mmc.3: Failed to get rstctl; not using any
- [ 9.370247] omap_hsmmc mmc.3: unable to select pin group
- [ 9.376104] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
- [ 9.383306] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
- [ 9.390989] mmc.3 supply vmmc_aux not found, using dummy regulator
- [ 9.399000] omap_hsmmc mmc.3: pins are not configured from the driver
- [ 9.411792] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- [ 9.411867] hub 1-0:1.0: hub_suspend
- [ 9.411911] usb usb1: bus auto-suspend, wakeup 1
- [ 9.433739] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.6
- [ 9.445471] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.6) status -22
- [ 9.452777] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
- [ 9.461762] leds-gpio gpio-leds.6: pins are not configured from the driver
- [ 9.469008] of_get_named_gpio_flags exited with status 53
- [ 9.469033] of_get_named_gpio_flags exited with status 54
- [ 9.469055] of_get_named_gpio_flags exited with status 55
- [ 9.469076] of_get_named_gpio_flags exited with status 56
- [ 9.469102] of_get_named_gpio_flags exited with status 53
- [ 9.469378] of_get_named_gpio_flags exited with status 54
- [ 9.469613] of_get_named_gpio_flags exited with status 55
- [ 9.469792] of_get_named_gpio_flags exited with status 56
- [ 9.470142] ledtrig-cpu: registered to indicate activity on CPUs
- [ 9.476980] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
- [ 9.484235] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
- [ 9.492717] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
- [ 9.499044] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
- [ 9.506282] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
- [ 9.514421] usbcore: registered new interface driver usbhid
- [ 9.520386] usbhid: USB HID core driver
- [ 9.524467] usb usb1: usb wakeup-resume
- [ 9.524516] usb usb1: usb auto-resume
- [ 9.524545] hub 1-0:1.0: hub_resume
- [ 9.524601] hub 1-0:1.0: port 1: status 0101 change 0001
- [ 9.527825] TCP: cubic registered
- [ 9.531407] Initializing XFRM netlink socket
- [ 9.536001] NET: Registered protocol family 17
- [ 9.540820] NET: Registered protocol family 15
- [ 9.545708] Key type dns_resolver registered
- [ 9.550514] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 9.558650] ThumbEE CPU extension supported.
- [ 9.563193] Registering SWP/SWPB emulation handler
- [ 9.569173] registered taskstats version 1
- [ 9.574291] [drm:tilcdc_drm_init], init
- [ 9.575031] of_get_named_gpio_flags exited with status 7
- [ 9.575061] panel panel.7: Power GPIO active high, initial state set to high
- [ 9.582938] [drm:drm_platform_init],
- [ 9.582962] [drm:drm_get_platform_dev],
- [ 9.583063] [drm:drm_get_minor],
- [ 9.583794] [drm:drm_get_minor], new minor assigned 64
- [ 9.583818] [drm:drm_get_minor],
- [ 9.584343] [drm:drm_get_minor], new minor assigned 0
- [ 9.584462] of_get_named_gpio_flags exited with status 48
- [ 9.584486] tilcdc 4830e000.fb: Power GPIO active high, initial state set to high
- [ 9.592422] [drm:tilcdc_load], Maximum Bandwidth Value 78643200
- [ 9.592447] [drm:tilcdc_load], Maximum Horizontal Pixel Width Value 2048pixels
- [ 9.592467] [drm:tilcdc_load], Maximum Pixel Clock Value 126000KHz
- [ 9.592487] [drm:tilcdc_load], Allowing Standard Monitor Modes: true
- [ 9.592505] [drm:tilcdc_load], Allowing Non Audio Monitor Modes: false
- [ 9.592639] [drm:modeset_init], loading module: panel
- [ 9.592690] [drm:drm_sysfs_connector_add], adding "LVDS-1" to sysfs
- [ 9.592874] [drm:drm_sysfs_hotplug_event], generating hotplug event
- [ 9.592927] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 9.599899] [drm] No driver support for vblank timestamp query.
- [ 9.606179] [drm:drm_irq_install], irq=52
- [ 9.606288] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
- [ 9.606372] [drm:tilcdc_crtc_mode_valid], mode 1024x768@32 pixel-clock 30000 audio false cea false can_output false
- [ 9.606406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
- [ 9.606427] [drm:drm_mode_debug_printmodeline], Modeline 6:"1024x768" 32 30000 1024 1063 1110 1149 768 781 783 812 0x48 0xa
- [ 9.606492] [drm:drm_setup_crtcs],
- [ 9.606510] [drm:drm_enable_connectors], connector 5 enabled? yes
- [ 9.606529] [drm:drm_target_preferred], looking for cmdline mode on connector 5
- [ 9.606548] [drm:drm_target_preferred], looking for preferred mode on connector 5
- [ 9.606565] [drm:drm_target_preferred], found mode 1024x768
- [ 9.606581] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
- [ 9.606604] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
- [ 9.606634] [drm:drm_fbdev_cma_create], surface width(1024), height(768) and bpp(16)
- [ 9.610822] [drm:drm_crtc_helper_set_config],
- [ 9.610838] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 9.610910] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
- [ 9.610922] [drm:drm_crtc_helper_set_config], modes are different, full mode set
- [ 9.610942] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- [ 9.610963] [drm:drm_mode_debug_printmodeline], Modeline 7:"1024x768" 32 30000 1024 1063 1110 1149 768 781 783 812 0x48 0xa
- [ 9.610973] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
- [ 9.610983] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
- [ 9.610996] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 9.611007] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
- [ 9.611027] [drm:drm_mode_debug_printmodeline], Modeline 7:"1024x768" 32 30000 1024 1063 1110 1149 768 781 783 812 0x48 0xa
- [ 9.611059] [drm:drm_crtc_helper_set_mode], [CRTC:3]
- [ 9.611106] [drm:tilcdc_crtc_mode_valid], mode 1024x768@32 pixel-clock 30000 audio false cea false can_output false
- [ 9.611198] [drm:tilcdc_crtc_mode_set], 1024x768, hbp=39, hfp=39, hsw=47, vbp=29, vfp=13, vsw=2
- [ 9.611221] [drm:drm_framebuffer_reference], FB ID: 8
- [ 9.611231] [drm:drm_framebuffer_reference], FB ID: 8
- [ 9.611359] [drm:tilcdc_crtc_update_clk], lcd_clk=60000000, mode clock=30000, div=2
- [ 9.611374] [drm:tilcdc_crtc_update_clk], fck=60000000, dpll_disp_ck=60000000
- [ 9.611416] [drm:drm_crtc_helper_set_mode], [ENCODER:4:LVDS-4] set [MODE:7:1024x768]
- [ 9.618531] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 9.618720] [drm:drm_calc_timestamping_constants], crtc 3: hwmode: htotal 1149, vtotal 812, vdisplay 768
- [ 9.618737] [drm:drm_calc_timestamping_constants], crtc 3: clock 30000 kHz framedur 31099600 linedur 38300, pixeldur 33
- [ 9.618756] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
- [ 9.618769] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
- [ 9.618926] [drm:drm_crtc_helper_set_config],
- [ 9.618940] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 9.618965] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 9.632253] Console: switching to colour frame buffer device 128x48
- [ 9.632482] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
- [ 9.632536] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 9.632609] [drm:drm_crtc_helper_set_config],
- [ 9.632623] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 9.632660] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 9.662621] tilcdc 4830e000.fb: fb0: frame buffer device
- [ 9.668295] tilcdc 4830e000.fb: registered panic notifier
- [ 9.673994] mmc0: new high speed SDHC card at address 9d02
- [ 9.680598] mmcblk0: mmc0:9d02 SU04G 3.69 GiB
- [ 9.686512] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
- [ 9.692908] mmcblk0: p1 p2
- [ 9.737915] usb 1-1: new full-speed USB device number 2 using musb-hdrc
- [ 9.747625] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
- [ 9.754031] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
- [ 9.761645] libphy: 4a101000.mdio: probed
- [ 9.765911] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
- [ 9.775753] Detected MACID = d4:94:a1:35:b1:3c
- [ 9.780417] cpsw 4a100000.ethernet: NAPI disabled
- [ 9.787140] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
- [ 9.849275] tilcdc 4830e000.fb: timeout waiting for framedone
- [ 9.855351] [drm:tilcdc_crtc_update_clk], lcd_clk=60000000, mode clock=30000, div=2
- [ 9.855373] [drm:tilcdc_crtc_update_clk], fck=60000000, dpll_disp_ck=60000000
- [ 9.868747] ALSA device list:
- [ 9.871898] No soundcards found.
- [ 9.875525] usb 1-1: ep0 maxpacket = 8
- [ 9.878645] usb 1-1: skipped 1 descriptor after interface
- [ 9.878674] usb 1-1: skipped 1 descriptor after interface
- [ 9.878691] usb 1-1: skipped 1 descriptor after interface
- [ 9.878841] usb 1-1: default language 0x0409
- [ 9.879435] usb 1-1: udev 2, busnum 1, minor = 1
- [ 9.879457] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
- [ 9.886568] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 9.894062] usb 1-1: Product: USB Receiver
- [ 9.898368] usb 1-1: Manufacturer: Logitech
- [ 9.903030] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- [ 9.910710] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- [ 9.918783] usb 1-1: usb_probe_device
- [ 9.918806] usb 1-1: configuration #1 chosen from 1 choice
- [ 9.919561] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 9.919888] usbhid 1-1:1.0: usb_probe_interface
- [ 9.919909] usbhid 1-1:1.0: usb_probe_interface - got id
- [ 9.922657] input: Logitech USB Receiver as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.0/input/input1
- [ 9.934428] hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-musb-hdrc.1.auto-1/input0
- [ 9.947202] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
- [ 9.947466] usbhid 1-1:1.1: usb_probe_interface
- [ 9.947531] usbhid 1-1:1.1: usb_probe_interface - got id
- [ 9.953115] input: Logitech USB Receiver as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.1/input/input2
- [ 9.966803] hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-musb-hdrc.1.auto-1/input1
- [ 9.979304] usb 1-1: adding 1-1:1.2 (config #1, interface 2)
- [ 9.979563] usbhid 1-1:1.2: usb_probe_interface
- [ 9.979584] usbhid 1-1:1.2: usb_probe_interface - got id
- [ 9.983490] hid-generic 0003:046D:C52B.0003: device has no listeners, quitting
- [ 9.991666] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
- [ 9.991748] hub 1-0:1.0: port 1 enable change, status 00000103
- [ 12.500793] EXT4-fs (mmcblk0p2): recovery complete
- [ 13.004193] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.012790] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 13.022459] devtmpfs: mounted
- [ 13.026135] Freeing init memory: 260K
- >[ 13.914815] udevd[106]: starting version 182
- [ 16.230087] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
- [ 16.737966] net eth0: initializing cpsw version 1.12 (0)
- [ 16.746101] net eth0: phy found : id is : 0x7c0f1
- [ 16.753862] libphy: PHY 4a101000.mdio:01 not found
- [ 16.759467] net eth0: phy 4a101000.mdio:01 not found on slave 1
- [ 17.013713] NET: Registered protocol family 10
- [ 17.022524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.374333] [drm:drm_stub_open],
- [ 18.374371] [drm:drm_open_helper], pid = 346, minor = 0
- [ 18.374406] [drm:drm_setup],
- [ 18.374511] [drm:drm_ioctl], pid=346, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
- [ 18.377002] [drm:drm_ioctl], pid=346, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
- [ 18.377078] [drm:drm_ioctl], pid=346, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
- [ 18.377145] [drm:drm_release], open_count = 1
- [ 18.377162] [drm:drm_release], pid = 346, device = 0xe200, open_count = 1
- [ 18.377197] [drm:drm_lastclose],
- [ 18.377212] [drm:drm_crtc_helper_set_config],
- [ 18.377225] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.377264] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 18.377282] [drm:drm_lastclose], driver lastclose completed
- [ 18.377296] [drm:drm_lastclose], lastclose completed
- [ 18.427711] [drm:drm_crtc_helper_set_config],
- [ 18.427725] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.427768] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 18.438433] [drm:drm_stub_open],
- [ 18.438465] [drm:drm_open_helper], pid = 346, minor = 0
- [ 18.438498] [drm:drm_setup],
- [ 18.438545] [drm:drm_release], open_count = 1
- [ 18.438562] [drm:drm_release], pid = 346, device = 0xe200, open_count = 1
- [ 18.438597] [drm:drm_lastclose],
- [ 18.438611] [drm:drm_crtc_helper_set_config],
- [ 18.438623] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.438654] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 18.438670] [drm:drm_lastclose], driver lastclose completed
- [ 18.438684] [drm:drm_lastclose], lastclose completed
- [ 18.443658] [drm:drm_crtc_helper_set_config],
- [ 18.443673] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.443705] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 18.443718] [drm:drm_crtc_helper_set_config],
- [ 18.443728] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.443745] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 18.443801] [drm:drm_crtc_helper_set_config],
- [ 18.443811] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.443827] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
- [ 18.460365] [drm:drm_crtc_helper_set_config],
- [ 18.460380] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:8] #connectors=1 (x y) (0 0)
- [ 18.460414] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement