API tools faq
paste
Guest User

Untitled

a guest
Aug 3rd, 2013
187
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.23 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.43 2012-06-05 r3561 [i686-linux-3.6.11] (local build)
  2. Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Hitachi Travelstar 5K100
  6. Device Model: HTS541060G9AT00
  7. Serial Number: MPB3LAX5K46THM
  8. Firmware Version: MB3IA60A
  9. User Capacity: 60,011,642,880 bytes [60.0 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: 6
  13. ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
  14. Local Time is: Sat Aug 3 19:17:15 2013 UTC
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x82) Offline data collection activity
  23. was completed without error.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: ( 645) seconds.
  30. Offline data collection
  31. capabilities: (0x5b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. No Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. No General Purpose Logging support.
  44. Short self-test routine
  45. recommended polling time: ( 2) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 42) minutes.
  48.  
  49. SMART Attributes Data Structure revision number: 16
  50. Vendor Specific SMART Attributes with Thresholds:
  51. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  52. 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
  53. 2 Throughput_Performance 0x0005 102 102 040 Pre-fail Offline - 4711
  54. 3 Spin_Up_Time 0x0007 153 153 033 Pre-fail Always - 1
  55. 4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3381
  56. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  57. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  58. 8 Seek_Time_Performance 0x0005 120 120 040 Pre-fail Offline - 40
  59. 9 Power_On_Hours 0x0012 061 061 000 Old_age Always - 17393
  60. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  61. 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3199
  62. 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 1
  63. 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 1573333
  64. 193 Load_Cycle_Count 0x0012 016 016 000 Old_age Always - 844542
  65. 194 Temperature_Celsius 0x0002 161 161 000 Old_age Always - 34 (Min/Max 13/53)
  66. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  67. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  68. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  69. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  70.  
  71. SMART Error Log Version: 1
  72. ATA Error Count: 384 (device log contains only the most recent five errors)
  73. CR = Command Register [HEX]
  74. FR = Features Register [HEX]
  75. SC = Sector Count Register [HEX]
  76. SN = Sector Number Register [HEX]
  77. CL = Cylinder Low Register [HEX]
  78. CH = Cylinder High Register [HEX]
  79. DH = Device/Head Register [HEX]
  80. DC = Device Command Register [HEX]
  81. ER = Error register [HEX]
  82. ST = Status register [HEX]
  83. Powered_Up_Time is measured from power on, and printed as
  84. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  85. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  86.  
  87. Error 384 occurred at disk power-on lifetime: 17391 hours (724 days + 15 hours)
  88. When the command that caused the error occurred, the device was active or idle.
  89.  
  90. After command completion occurred, registers were:
  91. ER ST SC SN CL CH DH
  92. -- -- -- -- -- -- --
  93. 40 51 08 08 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000808 = 2056
  94.  
  95. Commands leading to the command that caused the error were:
  96. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  97. -- -- -- -- -- -- -- -- ---------------- --------------------
  98. c8 00 08 08 08 00 e0 00 07:02:25.600 READ DMA
  99. c8 00 08 08 59 56 e3 00 07:02:25.600 READ DMA
  100. f8 00 00 00 00 00 e0 00 07:02:25.600 READ NATIVE MAX ADDRESS
  101. ec 00 00 00 00 00 a0 00 07:02:25.600 IDENTIFY DEVICE
  102. ef 03 45 00 00 00 a0 00 07:02:25.600 SET FEATURES [Set transfer mode]
  103.  
  104. Error 383 occurred at disk power-on lifetime: 17391 hours (724 days + 15 hours)
  105. When the command that caused the error occurred, the device was active or idle.
  106.  
  107. After command completion occurred, registers were:
  108. ER ST SC SN CL CH DH
  109. -- -- -- -- -- -- --
  110. 40 51 08 08 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000808 = 2056
  111.  
  112. Commands leading to the command that caused the error were:
  113. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  114. -- -- -- -- -- -- -- -- ---------------- --------------------
  115. c8 00 08 08 08 00 e0 00 07:02:21.500 READ DMA
  116. c8 00 08 00 39 56 e3 00 07:02:21.500 READ DMA
  117. c8 00 08 78 08 00 e0 00 07:02:21.500 READ DMA
  118. c8 00 08 38 08 00 e0 00 07:02:21.500 READ DMA
  119. c8 00 08 f8 18 56 e3 00 07:02:21.500 READ DMA
  120.  
  121. Error 382 occurred at disk power-on lifetime: 17391 hours (724 days + 15 hours)
  122. When the command that caused the error occurred, the device was active or idle.
  123.  
  124. After command completion occurred, registers were:
  125. ER ST SC SN CL CH DH
  126. -- -- -- -- -- -- --
  127. 40 51 08 08 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000808 = 2056
  128.  
  129. Commands leading to the command that caused the error were:
  130. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  131. -- -- -- -- -- -- -- -- ---------------- --------------------
  132. c8 00 08 08 08 00 e0 00 07:02:17.400 READ DMA
  133. c8 00 08 e8 d8 55 e3 00 07:02:17.400 READ DMA
  134. f8 00 00 00 00 00 e0 00 07:02:17.400 READ NATIVE MAX ADDRESS
  135. ec 00 00 00 00 00 a0 00 07:02:17.400 IDENTIFY DEVICE
  136. ef 03 45 00 00 00 a0 00 07:02:17.400 SET FEATURES [Set transfer mode]
  137.  
  138. Error 381 occurred at disk power-on lifetime: 17391 hours (724 days + 15 hours)
  139. When the command that caused the error occurred, the device was active or idle.
  140.  
  141. After command completion occurred, registers were:
  142. ER ST SC SN CL CH DH
  143. -- -- -- -- -- -- --
  144. 40 51 08 08 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000808 = 2056
  145.  
  146. Commands leading to the command that caused the error were:
  147. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  148. -- -- -- -- -- -- -- -- ---------------- --------------------
  149. c8 00 08 08 08 00 e0 00 07:02:13.300 READ DMA
  150. c8 00 08 e0 b8 55 e3 00 07:02:13.300 READ DMA
  151. f8 00 00 00 00 00 e0 00 07:02:13.300 READ NATIVE MAX ADDRESS
  152. ec 00 00 00 00 00 a0 00 07:02:13.300 IDENTIFY DEVICE
  153. ef 03 45 00 00 00 a0 00 07:02:13.300 SET FEATURES [Set transfer mode]
  154.  
  155. Error 380 occurred at disk power-on lifetime: 17391 hours (724 days + 15 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 08 08 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000808 = 2056
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. c8 00 08 08 08 00 e0 00 07:02:09.300 READ DMA
  167. c8 00 08 d8 98 55 e3 00 07:02:09.200 READ DMA
  168. f8 00 00 00 00 00 e0 00 07:02:09.200 READ NATIVE MAX ADDRESS
  169. ec 00 00 00 00 00 a0 00 07:02:09.200 IDENTIFY DEVICE
  170. ef 03 45 00 00 00 a0 00 07:02:09.200 SET FEATURES [Set transfer mode]
  171.  
  172. SMART Self-test log structure revision number 1
  173. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  174. # 1 Short offline Completed without error 00% 8123 -
  175.  
  176. Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
  177. SMART Selective self-test log data structure revision number 1
  178. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  179. 1 0 0 Not_testing
  180. 2 0 0 Not_testing
  181. 3 0 0 Not_testing
  182. 4 0 0 Not_testing
  183. 5 0 0 Not_testing
  184. Selective self-test flags (0x0):
  185. After scanning selected spans, do NOT read-scan remainder of disk.
  186. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!