Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 98 % [..............................................................]
- [Type Ctrl-\ + c to quit]
- U-Boot 2013.10-tld-1 (Aug 17 2014 - 23:57:26)
- ZyXEL NSA320 2-Bay Power Media Server
- SoC: Kirkwood 88F6281_A1
- DRAM: 512 MiB
- WARNING: Caches not enabled
- NAND: 128 MiB
- In: serial
- Out: serial
- Err: serial
- Net: egiga0
- MV88E1318 PHY initialized on egiga0
- Hit any key to stop autoboot: 0
- Reset IDE: Bus 0: ...........OK Bus 1: not available
- Device 0: Model: ST4000DM000-1F2168 Firm: CC52 Ser#: XXXXXXX
- Type: Hard Disk
- Supports 48-bit addressing
- Capacity: 3815447.8 MB = 3726.0 GB (7814037168 x 512)
- 2399792 bytes read in 395 ms (5.8 MiB/s)
- 6750476 bytes read in 1040 ms (6.2 MiB/s)
- ## Booting kernel from Legacy Image at 00800000 ...
- Image Name: Linux-3.13.1-kirkwood-tld-2
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2399728 Bytes = 2.3 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: initramfs-3.13.1-kirkwood-tld-2
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6750412 Bytes = 6.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.13.1-kirkwood-tld-2 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Tue Feb 4 03:19:07 PST 2014
- [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine: ZyXEL NSA320 2-Bay Power Media Server
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 mtdparts=orion_nand:1M(u-boot),512K(uboot_env),512K(key_store),512K(info),10M(etc),10M(kernel_1),48896K(rootfs1),10M(kernel_2),-(rootfs2)
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 505884K/524288K available (4659K kernel code, 346K rwdata, 1588K rodata, 211K init, 425K bss, 18404K reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc06220ac (6249 kB)
- [ 0.000000] .init : 0xc0623000 - 0xc0657e4c ( 212 kB)
- [ 0.000000] .data : 0xc0658000 - 0xc06ae824 ( 347 kB)
- [ 0.000000] .bss : 0xc06ae824 - 0xc0718d6c ( 426 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:114
- [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 1.461966] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
- [ 1.551758] pid_max: default: 32768 minimum: 301
- [ 1.551865] Security Framework initialized
- [ 1.551939] Mount-cache hash table entries: 512
- [ 1.552562] Initializing cgroup subsys devices
- [ 1.552585] Initializing cgroup subsys freezer
- [ 1.552598] Initializing cgroup subsys net_cls
- [ 1.552607] Initializing cgroup subsys blkio
- [ 1.552686] CPU: Testing write buffer coherency: ok
- [ 1.553059] Setting up static identity map for 0x469248 - 0x469284
- [ 1.555140] devtmpfs: initialized
- [ 1.557495] prandom: seed boundary self test passed
- [ 1.561491] prandom: 100 self tests passed
- [ 1.561503] pinctrl core: initialized pinctrl subsystem
- [ 1.561907] regulator-dummy: no parameters
- [ 1.562232] NET: Registered protocol family 16
- [ 1.562648] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 1.563252] cpuidle: using governor ladder
- [ 1.563270] cpuidle: using governor menu
- [ 1.563368] Kirkwood: MV88F6281-A1, TCLK=200000000.
- [ 1.563389] Feroceon L2: Enabling L2
- [ 1.563428] Feroceon L2: Cache support initialised.
- [ 1.567517] bio: create slab <bio-0> at 0
- [ 1.567952] vgaarb: loaded
- [ 1.568169] usbcore: registered new interface driver usbfs
- [ 1.568221] usbcore: registered new interface driver hub
- [ 1.568324] usbcore: registered new device driver usb
- [ 1.568909] Switched to clocksource orion_clocksource
- [ 1.589075] NET: Registered protocol family 2
- [ 1.589711] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.589767] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.589819] TCP: Hash tables configured (established 4096 bind 4096)
- [ 1.589884] TCP: reno registered
- [ 1.589898] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.589919] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.590113] NET: Registered protocol family 1
- [ 1.590420] RPC: Registered named UNIX socket transport module.
- [ 1.590431] RPC: Registered udp transport module.
- [ 1.590438] RPC: Registered tcp transport module.
- [ 1.590445] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.590683] Unpacking initramfs...
- [ 2.145996] Freeing initrd memory: 6588K (c1101000 - c1770000)
- [ 2.146094] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 2.146696] audit: initializing netlink socket (disabled)
- [ 2.146746] type=2000 audit(0.670:1): initialized
- [ 2.147505] zbud: loaded
- [ 2.147670] VFS: Disk quotas dquot_6.5.2
- [ 2.147719] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.148081] NFS: Registering the id_resolver key type
- [ 2.148139] Key type id_resolver registered
- [ 2.148148] Key type id_legacy registered
- [ 2.148166] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.148175] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 2.148341] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 2.148606] msgmni has been set to 1000
- [ 2.148732] Key type big_key registered
- [ 2.150565] alg: No test for stdrng (krng)
- [ 2.150653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 2.150664] io scheduler noop registered
- [ 2.150672] io scheduler deadline registered
- [ 2.150699] io scheduler cfq registered (default)
- [ 2.150903] mv_xor mv_xor.0: Marvell shared XOR driver
- [ 2.188991] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- [ 2.228971] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
- [ 2.229070] mv_xor mv_xor.1: Marvell shared XOR driver
- [ 2.268972] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
- [ 2.308969] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
- [ 2.309226] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 2.329774] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
- [ 2.864845] console [ttyS0] enabled
- [ 2.869210] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
- [ 2.877859] NAND device: 128MiB, SLC, page size: 2048, OOB size: 64
- [ 2.884179] Scanning device for bad blocks
- [ 2.888565] Bad eraseblock 2 at 0x000000040000
- [ 2.893101] Bad eraseblock 3 at 0x000000060000
- [ 3.004324] 9 cmdlinepart partitions found on MTD device orion_nand
- [ 3.010635] Creating 9 MTD partitions on "orion_nand":
- [ 3.015795] 0x000000000000-0x000000100000 : "u-boot"
- [ 3.021032] 0x000000100000-0x000000180000 : "uboot_env"
- [ 3.026489] 0x000000180000-0x000000200000 : "key_store"
- [ 3.031978] 0x000000200000-0x000000280000 : "info"
- [ 3.037004] 0x000000280000-0x000000c80000 : "etc"
- [ 3.041967] 0x000000c80000-0x000001680000 : "kernel_1"
- [ 3.047339] 0x000001680000-0x000004640000 : "rootfs1"
- [ 3.052691] 0x000004640000-0x000005040000 : "kernel_2"
- [ 3.058072] 0x000005040000-0x000008000000 : "rootfs2"
- [ 3.063941] libphy: Fixed MDIO Bus: probed
- [ 3.079736] libphy: orion_mdio_bus: probed
- [ 3.083938] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
- [ 3.093167] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c8:6c:87:xx:xx:xx
- [ 3.102119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.108676] ehci-pci: EHCI PCI platform driver
- [ 3.113211] ehci-orion: EHCI orion driver
- [ 3.117297] orion-ehci orion-ehci.0: EHCI Host Controller
- [ 3.122789] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
- [ 3.130547] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
- [ 3.148934] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
- [ 3.155059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.161902] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.169180] usb usb1: Product: EHCI Host Controller
- [ 3.174079] usb usb1: Manufacturer: Linux 3.13.1-kirkwood-tld-2 ehci_hcd
- [ 3.180825] usb usb1: SerialNumber: orion-ehci.0
- [ 3.185915] hub 1-0:1.0: USB hub found
- [ 3.189744] hub 1-0:1.0: 1 port detected
- [ 3.194161] mousedev: PS/2 mouse device common for all mice
- [ 3.200117] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
- [ 3.206060] i2c /dev entries driver
- [ 3.210827] drop_monitor: Initializing network drop monitor service
- [ 3.217304] TCP: cubic registered
- [ 3.220668] NET: Registered protocol family 17
- [ 3.225232] Key type dns_resolver registered
- [ 3.229962] registered taskstats version 1
- [ 3.234843] rtc-mv rtc-mv: setting system clock to 2014-08-23 11:29:35 UTC (1408793375)
- [ 3.243795] Freeing unused kernel memory: 208K (c0623000 - c0657000)
- Loading, please wait...
- [ 3.299588] udevd[54]: starting version 175
- [ 3.495898] SCSI subsystem initialized
- [ 3.509163] usb 1-1: new high-speed USB device number 2 using orion-ehci
- [ 3.562601] sata_mv sata_mv.0: cannot get optional clkdev
- [ 3.568116] sata_mv sata_mv.0: slots 32 ports 2
- [ 3.622169] scsi0 : sata_mv
- [ 3.635142] scsi1 : sata_mv
- [ 3.638133] ata1: SATA max UDMA/133 irq 21
- [ 3.658433] ata2: SATA max UDMA/133 irq 21
- [ 3.670437] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 3.677186] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.684424] usb 1-1: Product: USB2.0 Hub
- [ 3.689481] hub 1-1:1.0: USB hub found
- [ 3.693559] hub 1-1:1.0: 4 ports detected
- [ 3.979315] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
- [ 4.093438] usb 1-1.2: New USB device found, idVendor=07ca, idProduct=850a
- [ 4.100368] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.107727] usb 1-1.2: Product: A850 DVBT
- [ 4.111773] usb 1-1.2: Manufacturer: AVerMedia
- [ 4.116240] usb 1-1.2: SerialNumber: 3xxxxxxxxxxxxx0
- [ 4.168963] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
- [ 4.209001] ata1.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
- [ 4.215246] usb 1-1.3: new high-speed USB device number 4 using orion-ehci
- [ 4.222194] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 4.288986] ata1.00: configured for UDMA/133
- [ 4.309335] scsi 0:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
- [ 4.341559] usb 1-1.3: New USB device found, idVendor=0930, idProduct=6544
- [ 4.348484] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.355856] usb 1-1.3: Product: TransMemory
- [ 4.360512] usb 1-1.3: Manufacturer: TOSHIBA
- [ 4.364890] usb 1-1.3: SerialNumber: 0xxxxxxxxxxxxxxxxxxxxxxF
- [ 4.385211] usb-storage 1-1.3:1.0: USB Mass Storage device detected
- [ 4.391826] scsi2 : usb-storage 1-1.3:1.0
- [ 4.397364] usbcore: registered new interface driver usb-storage
- [ 4.459324] usb 1-1.4: new high-speed USB device number 5 using orion-ehci
- [ 4.573805] usb 1-1.4: New USB device found, idVendor=07ca, idProduct=3835
- [ 4.580751] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.588114] usb 1-1.4: Product: A835B
- [ 4.591811] usb 1-1.4: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
- [ 4.597933] usb 1-1.4: SerialNumber: 3xxxxxxxxxx1
- [ 4.658954] ata2: SATA link down (SStatus 0 SControl F300)
- [ 4.713251] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
- [ 4.722159] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 4.727713] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.732753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.808129] sda: sda1 sda2 sda3
- [ 4.813605] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.828387] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 5.389786] scsi 2:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 2
- [ 5.407511] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 5.414119] sd 2:0:0:0: [sdb] 7823296 512-byte logical blocks: (4.00 GB/3.72 GiB)
- [ 5.428494] sd 2:0:0:0: [sdb] Write Protect is off
- [ 5.433969] sd 2:0:0:0: [sdb] No Caching mode page found
- [ 5.439367] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 5.449463] sd 2:0:0:0: [sdb] No Caching mode page found
- [ 5.454818] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 5.461965] sdb: sdb1
- [ 5.471357] sd 2:0:0:0: [sdb] No Caching mode page found
- [ 5.476718] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 5.492180] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- [ 15.275543] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- INIT: version 2.88 booting
- [info] Using makefile-style concurrent boot in runlevel S.
- [....] Starting the hotplug events dispatcher: udevd[ 16.547948] udevd[258]: starting version 175
- . ok
- [ ok ] Synthesizing the initial hotplug events...[ 16.877900] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- done.
- [....] Waiting for /dev to be fully populated...[ 16.997739] rtc-pcf8563 0-0051: chip found, driver version 0.4.3
- [ 17.057478] alg: hash: Test 1 failed for mv-hmac-sha1
- [ 17.064390] 00000000: 0c aa 9f d5 37 c3 79 3a 91 d9 21 5f 42 2b 2c 24
- [ 17.077720] 00000010: b7 c3 16 0c
- [ 17.085242] nsa3xx-hwmon nsa3xx-hwmon: initialized
- [ 17.099215] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc1
- [ 17.157840] orion_wdt: Initial timeout 21 sec
- [ 17.182124] random: nonblocking pool is initialized
- [ 17.197258] usb 1-1.2: dvb_usb_v2: found a 'AverMedia AVerTV Volar Black HD (A850)' in cold state
- [ 17.206341] it913x: Chip Version=02 Chip Type=9135
- [ 17.242474] it913x: Remote propriety (raw) mode
- [ 17.278766] usb 1-1.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw'
- [ 17.288217] it913x: Dual mode=0 Tuner Type=38
- [ 17.330971] it913x: Unknown tuner ID applying default 0x60
- [ 17.404958] usb 1-1.4: dvb_usb_v2: found a 'Avermedia A835B(3835)' in cold state
- [ 17.476271] usb 1-1.4: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
- [ 17.505470] usb 1-1.2: dvb_usb_v2: found a 'AverMedia AVerTV Volar Black HD (A850)' in warm state
- [ 17.557026] it913x: FRM Starting Firmware Download
- [ 18.000353] usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
- [ 18.022473] DVB: registering new adapter (AverMedia AVerTV Volar Black HD (A850))
- [ 18.080343] i2c i2c-1: af9013: firmware version 4.95.0.0
- [ 18.090350] it913x: FRM Firmware Download Completed - Resetting Device
- [ 18.098062] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
- [ 18.124033] MXL5005S: Attached at address 0xc6
- [ 18.130313] it913x: Chip Version=02 Chip Type=9135
- [ 18.135435] it913x: Firmware Version 52887808
- [ 18.146184] usb 1-1.2: dvb_usb_v2: 'AverMedia AVerTV Volar Black HD (A850)' successfully initialized and connected
- [ 18.157683] usbcore: registered new interface driver dvb_usb_af9015
- [ 18.219451] usb 1-1.4: dvb_usb_v2: found a 'Avermedia A835B(3835)' in warm state
- [ 18.229933] usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
- [ 18.239671] ERROR: 256 KiB atomic DMA coherent pool is too small!
- [ 18.239671] Please increase it with coherent_pool= kernel parameter!
- [ 18.253923] dvb_usb_it913x: probe of 1-1.4:1.0 failed with error -12
- [ 18.261274] usbcore: registered new interface driver dvb_usb_it913x
- done.
- [ ok ] Setting parameters of disc: (none).
- [....] Activating swap...[ 19.037864] Adding 478204k swap on /dev/sda3. Priority:-1 extents:1 across:478204k FS
- done.
- [ 19.122848] EXT4-fs (sda1): re-mounted. Opts: (null)
- [....] Checking root file system...fsck from util-linux 2.20.1
- /dev/sda1: clean, 51095/213408 files, 448931/851968 blocks
- done.
- [ 19.531718] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ ok ] Cleaning up temporary files... /tmp /lib/init/rw.
- [ ok ] Activating lvm and md swap...done.
- [....] Checking file systems...fsck from util-linux 2.20.1
- /dev/sda2: clean, 102530/243654656 files, 701244049/974609408 blocks
- done.
- [....] Mounting local filesystems...
- [ ok ] Activating swapfile swap...done.
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting kernel variables ...done.
- [....] Configuring network interfaces...[ 24.137931] NET: Registered protocol family 10
- Internet Systems Consortium DHCP Client 4.2.2
- Copyright 2004-2011 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- [ 24.281595] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
- [ 24.287686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Listening on LPF/eth0/c8:6c:87:xx:xx:xx
- Sending on LPF/eth0/c8:6c:87:xx:xx:xx
- Sending on Socket/fallback
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- [ 26.559852] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
- [ 26.569774] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPACK from 192.168.0.1
- Reloading /etc/samba/smb.conf: smbd only.
- bound to 192.168.0.253 -- renewal in 738697444 seconds.
- done.
- [ ok ] Cleaning up temporary files....
- INIT: Entering runlevel: 2
- [info] Using makefile-style concurrent boot in runlevel 2.
- [ ok ] Starting Samba daemons: nmbd smbd.
- [ ok ] Starting system logging: syslog-ng.
- [ ok ] Starting periodic command scheduler: cron.
- [ ok ] Starting system message bus: dbus.
- [....] Starting a multimedia keyboard daemon for Linux : esekeydESE Key Deamon 1.2.7 (SVN-r63)
- . ok
- [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- [ ok ] Starting NTP server: ntpd.
- [ ok ] Starting MySQL database server: mysqld[....] Starting OpenBSD Secure Shell server: sshd.
- [ ok ..
- [info] Checking for tables which need an upgrade, are corrupt or were not closed cleanly..
- Debian GNU/Linux 7 mynas ttyS0
- mynas login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement