Guest User

Untitled

a guest
Jan 7th, 2016
110
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.78 KB | None | 0 0
  1. smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-22-generic] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Momentus SpinPoint M8 (AF)
  6. Device Model: ST1000LM024 HN-M101MBB
  7. Serial Number: S314J90G424758
  8. LU WWN Device Id: 5 0004cf 20f8cfd04
  9. Firmware Version: 2BA30003
  10. User Capacity: 1.000.204.886.016 bytes [1,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 2.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 6
  16. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Thu Jan 7 23:07:41 2016 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 23) The self-test routine was aborted by
  29. the host.
  30. Total time to complete Offline
  31. data collection: (12900) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 215) minutes.
  50. SCT capabilities: (0x003f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 8
  59. 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
  60. 3 Spin_Up_Time 0x0023 092 090 025 Pre-fail Always - 2528
  61. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 635
  62. 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
  64. 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
  65. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2444
  66. 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 3
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 377
  69. 13 Read_Soft_Error_Rate 0x003a 100 100 000 Old_age Always - 0
  70. 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 783458
  71. 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 193
  72. 192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 75
  73. 193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 80012
  74. 194 Temperature_Celsius 0x0002 064 057 000 Old_age Always - 36 (Min/Max 18/43)
  75. 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
  76. 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
  77. 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
  78. 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
  79. 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
  80. 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 1856
  81. 240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 2339
  82. 241 Total_LBAs_Written 0x0032 099 094 000 Old_age Always - 2139048
  83. 242 Total_LBAs_Read 0x0032 100 094 000 Old_age Always - 1076445
  84. 254 Free_Fall_Sensor 0x0032 252 252 000 Old_age Always - 0
  85.  
  86. SMART Error Log Version: 1
  87. No Errors Logged
  88.  
  89. SMART Self-test log structure revision number 1
  90. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  91. # 1 Short offline Aborted by host 70% 201 -
  92. # 2 Short offline Completed without error 00% 106 -
  93. # 3 Short offline Completed without error 00% 1 -
  94.  
  95. SMART Selective self-test log data structure revision number 0
  96. Note: revision number not 1 implies that no selective self-test has ever been run
  97. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  98. 1 0 0 Aborted_by_host [70% left] (0-65535)
  99. 2 0 0 Not_testing
  100. 3 0 0 Not_testing
  101. 4 0 0 Not_testing
  102. 5 0 0 Not_testing
  103. Selective self-test flags (0x0):
  104. After scanning selected spans, do NOT read-scan remainder of disk.
  105. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment