Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- [ 0.000000@0] ******** uboot setup mac-addr: e8:18:63:50:6d:92
- [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes )
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] Memory: 80MB 282MB 512MB = 874MB total
- [ 0.000000@0] Memory: 875912k/875912k available, 19064k reserved, 278528K hig hmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] vmalloc : 0xef800000 - 0xff000000 ( 248 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xef000000 ( 752 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .text : 0xc0008000 - 0xc07b38fc (7855 kB)
- [ 0.000000@0] .init : 0xc07b4000 - 0xc07dee80 ( 172 kB)
- [ 0.000000@0] .data : 0xc07e0000 - 0xc0836020 ( 345 kB)
- [ 0.000000@0] .bss : 0xc0836020 - 0xc08bfafc ( 551 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] Global timer: MESON TIMER-A (c07f9b40) initialized
- [ 0.000000@0] Disable timerA
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] meson_serial_console_setup
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.324569@0] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
- [ 0.380046@0] pid_max: default: 32768 minimum: 301
- [ 0.382214@0] Mount-cache hash table entries: 512
- [ 0.387603@0] CPU: Testing write buffer coherency: ok
- [ 0.392148@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- [ 0.397585@0] Local timer: MESON TIMER-B (c07f9c40) for CPU0 initialized
- [ 0.404312@0] Disable timerA
- [ 0.407123@0] Disable timerB
- [ 0.409992@0] Disable timerA
- [ 0.412992@0] Setting up static identity map for 0xc05afb90 - 0xc05afbe8
- [ 0.419693@0] L310 cache controller enabled
- [ 0.423703@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c8, Cache size: 5242 88 B
- [ 0.431229@0] AUX_CTRL 0x3e460000, PERFETCH_CTRL 0x30000006, POWER_CTRL 0x00000000
- [ 0.439331@0] TAG_LATENCY 0x00000222, DATA_LATENCY 0x00000222
- [ 0.497971@1] CPU1: Booted secondary processor
- [ 0.557615@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- [ 0.557628@1] Local timer: MESON TIMER-D (c07f9e40) for CPU1 initialized
- [ 0.557684@0] Brought up 2 CPUs
- [ 0.557690@0] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
- [ 0.557693@0] CPU: All CPU(s) started in SVC mode.
- [ 0.558140@0] devtmpfs: initialized
- [ 0.562761@0] clkrate [ xtal ] : 24000000
- [ 0.562768@0] clkrate [ pll_sys ] : 1200000000
- [ 0.562773@0] clkrate [ pll_fixed ] : 2000000000
- [ 0.562777@0] clkrate [ pll_vid2 ] : 378000000
- [ 0.562780@0] clkrate [ pll_hpll ] : 378000000
- [ 0.562849@0] clkrate [ pll_ddr ] : 516000000
- [ 0.562853@0] clkrate [ a9_clk ] : 1200000000
- [ 0.562921@0] clkrate [ clk81 ] : 200000000
- [ 0.563954@0] pinctrl core: initialized pinctrl subsystem
- [ 0.564409@0] regulator-dummy: no parameters
- [ 0.564731@0] NET: Registered protocol family 16
- [ 0.582271@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.588755@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- [ 0.589404@0] register lm device lm-root
- [ 0.589527@0] register lm device lm1
- [ 0.589632@0] register lm device lm0
- [ 0.589954@0] Init pinux probe!
- [ 0.590740@0] pinmux-m6 pinmux: Probed amlogic pinctrl driver
- [ 0.590924@0] -------early_init_dt_probe:38----------
- [ 0.591091@0] -------early_init_dt_init:115----------
- [ 0.591094@0] tv_init_module
- [ 0.591104@0] major number 254 for disp
- [ 0.591106@0] vout_register_server
- [ 0.591109@0] register tv module server ok
- [ 0.591214@0] aml_i2c version: 20140813
- [ 0.591272@0] plat->state_name:default
- [ 0.591287@0] master_no = 0, master_regs=f3100500
- [ 0.591481@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ee8e48a8)
- [ 0.591485@0] aml-i2c i2c-AO: aml i2c bus driver.
- [ 0.591592@0] plat->state_name:default
- [ 0.591600@0] master_no = 1, master_regs=f1108500
- [ 0.591759@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ee8e4ca8)
- [ 0.591763@0] aml-i2c i2c-A: aml i2c bus driver.
- [ 0.591866@0] plat->state_name:default
- [ 0.591874@0] master_no = 2, master_regs=f11087c0
- [ 0.592024@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ee8e50a8)
- [ 0.592028@0] aml-i2c i2c-B: aml i2c bus driver.
- [ 0.592272@0] call aml_dvfs_init in
- [ 0.592322@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
- [ 0.592328@0] [DVFS]dvfs table of vcck_dvfs is:
- [ 0.592332@0] [DVFS] freq, min_uV, max_uV
- [ 0.592335@0] [DVFS] 200000, 1010000, 1010000
- [ 0.592337@0] [DVFS] 600000, 1010000, 1010000
- [ 0.592339@0] [DVFS] 792000, 1010000, 1010000
- [ 0.592341@0] [DVFS] 816000, 1110000, 1110000
- [ 0.592343@0] [DVFS] 840000, 1110000, 1110000
- [ 0.592345@0] [DVFS] 984000, 1110000, 1110000
- [ 0.592347@0] [DVFS] 1000000, 1110000, 1110000
- [ 0.592349@0] [DVFS] 1080000, 1220000, 1220000
- [ 0.592351@0] [DVFS] 1200000, 1240000, 1240000
- [ 0.592353@0] [DVFS] 1320000, 1320000, 1320000
- [ 0.592355@0] [DVFS] 1512000, 1320000, 1320000
- [ 0.592565@0] hdmitx: system: amhdmitx_init
- [ 0.592567@0] hdmitx: system: Ver: 2014May6
- [ 0.592619@0] hdmitx: system: amhdmitx_probe
- [ 0.592953@0] hdmitx: system: not find cec config
- [ 0.592955@0] hdmitx: system: not find vend_init_data
- [ 0.592980@0] amhdmitx is using the pin GPIOD_5
- [ 0.593345@0] hdmitx: system: hw init
- [ 0.593355@0] HDMI: get brd phy data
- [ 0.593356@0] hdmi phy setting
- [ 0.593404@0] HDMI: get brd phy data
- [ 0.593405@0] hdmi phy setting
- [ 0.593943@0] hdmitx: system: reset intr mask
- [ 0.640450@0] bio: create slab <bio-0> at 0
- [ 0.641508@0] SCSI subsystem initialized
- [ 0.642033@0] usbcore: registered new interface driver usbfs
- [ 0.642137@0] usbcore: registered new interface driver hub
- [ 0.642270@0] usbcore: registered new device driver usb
- [ 0.643263@0] TV mode 576cvbs selected.
- [ 0.643268@0] [0x1b7e] = 0xff
- [ 0.643269@0] [0x105f] = 0x0
- [ 0.643271@0] [0x109c] = 0x2001042d
- [ 0.643273@0] [0x109d] = 0x814d3928
- [ 0.643275@0] [0x109e] = 0x6b425012
- [ 0.643276@0] [0x109f] = 0x110
- [ 0.643278@0] [0x109c] = 0x1042d
- [ 0.643280@0] [0x1066] = 0x11943
- [ 0.643281@0] [0x1059] = 0x100
- [ 0.643283@0] [0x105f] = 0x80000
- [ 0.643285@0] [0x105f] = 0x88001
- [ 0.643286@0] [0x105f] = 0x80003
- [ 0.643288@0] [0x104a] = 0x101
- [ 0.643289@0] [0x1b54] = 0x12
- [ 0.643291@0] [0x1c0a] = 0x12
- [ 0.643292@0] [0x1b62] = 0x0
- [ 0.643294@0] [0x1b00] = 0x0
- [ 0.643295@0] [0x1b01] = 0x0
- [ 0.643297@0] [0x1b0a] = 0x3
- [ 0.643298@0] [0x1b0b] = 0x81
- [ 0.643300@0] [0x1b0e] = 0x3
- [ 0.643301@0] [0x1b0f] = 0x104
- [ 0.643303@0] [0x1b50] = 0x8107
- [ 0.643305@0] [0x1b68] = 0xff
- [ 0.643306@0] [0x1b00] = 0x13
- [ 0.643307@0] [0x1b01] = 0x26
- [ 0.643309@0] [0x1b07] = 0x28
- [ 0.643310@0] [0x1b08] = 0x7
- [ 0.643312@0] [0x1b56] = 0x333
- [ 0.643313@0] [0x1c19] = 0xfb
- [ 0.643315@0] [0x1c1a] = 0x69b
- [ 0.643316@0] [0x1c1b] = 0x16
- [ 0.643318@0] [0x1c1c] = 0x136
- [ 0.643319@0] [0x1c1d] = 0x17
- [ 0.643321@0] [0x1c1e] = 0x137
- [ 0.643323@0] [0x1b60] = 0x0
- [ 0.643324@0] [0x1b48] = 0x0
- [ 0.643325@0] [0x1b6e] = 0x2
- [ 0.643327@0] [0x1c18] = 0x4e01
- [ 0.643328@0] [0x1b64] = 0x61
- [ 0.643330@0] [0x1b65] = 0x4061
- [ 0.643331@0] [0x1b66] = 0x5061
- [ 0.643333@0] [0x1b78] = 0x0
- [ 0.643334@0] [0x1b79] = 0x0
- [ 0.643336@0] [0x1b7a] = 0x0
- [ 0.643337@0] [0x1b7b] = 0x0
- [ 0.643339@0] [0x1b7c] = 0x0
- [ 0.643340@0] [0x1b7d] = 0x0
- [ 0.643342@0] [0x271a] = 0x5
- [ 0.643343@0] [0x1bfc] = 0x2000
- [ 0.643345@0] [0x1c0b] = 0x1111
- [ 0.643346@0] [0x1c0c] = 0x11
- [ 0.643348@0] [0x1b80] = 0x0
- [ 0.643349@0] [0x1b57] = 0x1
- [ 0.643351@0] [0x1bf2] = 0x1b
- [ 0.643352@0] [0x1b56] = 0x333
- [ 0.643353@0] [0x1b05] = 0x5
- [ 0.643355@0] [0x1c5a] = 0x1
- [ 0.643356@0] [0x1c5b] = 0xfc48
- [ 0.643358@0] [0x1b30] = 0x0
- [ 0.643360@0] tvoutc_setmode[452]
- [ 0.643364@0] mode is: 8
- [ 0.643366@0] config HPLL
- [ 0.643369@0] set_hpll_clk_out[230] clk = 1080
- [ 0.643371@0] config HPLL done
- [ 1.004840@1] Disable timerD
- [ 1.649647@0] call aml_pmu_probe_init in
- [ 1.649942@0] get property: use_pwm, value:0x00000001, dec: 1
- [ 1.655665@0] get property: table_count, value:0x00000010, dec: 16
- [ 1.663406@0] meson_cs_dvfs_probe, table count:16, use_pwm:1, pwm controller: 2
- [ 1.670598@0] 0, 00130009, 1010000
- [ 1.674062@0] 1, 0012000a, 1050000
- [ 1.677534@0] 2, 0011000b, 1070000
- [ 1.681016@0] 3, 0010000c, 1090000
- [ 1.684478@0] 4, 000f000d, 1110000
- [ 1.687957@0] 5, 000e000e, 1130000
- [ 1.691422@0] 6, 000d000f, 1150000
- [ 1.694894@0] 7, 000c0010, 1170000
- [ 1.698371@0] 8, 000b0011, 1190000
- [ 1.701838@0] 9, 000a0012, 1210000
- [ 1.705310@0] 10, 00090013, 1220000
- [ 1.708801@0] 11, 00080014, 1240000
- [ 1.712254@0] 12, 00070015, 1270000
- [ 1.715726@0] 13, 00060016, 1280000
- [ 1.719207@0] 14, 00050017, 1300000
- [ 1.722670@0] 15, 00040018, 1320000
- [ 1.726194@0] get pin for pwm--------
- [ 1.729801@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist suc cess, mask:1, source id:1
- [ 1.730172@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.736956@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.743317@0] Switching to clocksource Timer-E
- [ 1.757410@0] NET: Registered protocol family 2
- [ 1.757931@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes )
- [ 1.763585@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.770201@0] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.776688@0] TCP: reno registered
- [ 1.780014@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.786110@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.792799@0] NET: Registered protocol family 1
- [ 1.797781@0] RPC: Registered named UNIX socket transport module.
- [ 1.803169@0] RPC: Registered udp transport module.
- [ 1.808049@0] RPC: Registered tcp transport module.
- [ 1.812891@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.819582@0] wifi_dev_probe
- [ 1.822355@0] wifi_dt : interrupt_pin=GPIOX_11
- [ 1.826785@0] wifi_dt : irq_num=null
- [ 1.830374@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
- [ 1.835460@0] wifi_dt : power_on_pin=GPIOC_7
- [ 1.839729@0] interrupt_pin=52, irq_num=4, irq_trigger_type=0, power_on_pin=1 12,clock_32k_pin=53
- [ 1.848954@0] Unpacking initramfs...
- [ 1.895610@0] Freeing initrd memory: 948K (c4008000 - c40f5000)
- [ 1.897861@1] balance_pgdat end zone=0, pgdat_is_balanced=0
- [ 1.897954@0] bounce pool size: 64 pages
- [ 1.907314@0] Registering unionfs 2.6 (for 3.10.53)
- [ 1.908278@0] NFS: Registering the id_resolver key type
- [ 1.911799@0] Key type id_resolver registered
- [ 1.916105@0] Key type id_legacy registered
- [ 1.920317@0] NTFS driver 2.1.30 [Flags: R/W].
- [ 1.925038@0] msgmni has been set to 1168
- [ 1.929639@0] io scheduler noop registered
- [ 1.932771@0] io scheduler deadline registered (default)
- [ 1.943089@0] loop: module loaded
- [ 1.944279@0] tun: Universal TUN/TAP device driver, 1.6
- [ 1.946571@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.953227@0] usbcore: registered new interface driver asix
- [ 1.958605@0] usbcore: registered new interface driver ax88179_178a
- [ 1.964800@0] usbcore: registered new interface driver cdc_ether
- [ 1.970814@0] usbcore: registered new interface driver net1080
- [ 1.976596@0] usbcore: registered new interface driver cdc_subset
- [ 1.982719@0] usbcore: registered new interface driver zaurus
- [ 1.988457@0] usbcore: registered new interface driver cdc_ncm
- [ 1.994441@0] usbcore: registered new interface driver usb-storage
- [ 2.000316@0] i2c /dev entries driver
- [ 2.004559@0] wetekplay_led_init_module
- [ 2.008322@0] vout_init_module
- [ 2.010847@0] start init vout module
- [ 2.014622@0] create vout attribute ok
- [ 2.018673@0] ge2d_init
- [ 2.020963@0] ge2d_dev major:249
- [ 2.024516@0] ge2d start monitor
- [ 2.027624@0] osd_init
- [ 2.027631@1] ge2d workqueue monitor start
- [ 2.034133@0] osd_probe, vinfo:c05e5870
- [ 2.038031@0] Frame buffer memory assigned at phy:0x87100000, vir:0xfb000000, size=16384K
- [ 2.046051@0] osd_probe, mydef_var:c0816ff8, vinfo:c05e5870
- [ 2.051643@0] init fbdev bpp is :32
- [ 2.055158@0] ---------------clear framebuffer0 memory
- [ 2.083410@0] Frame buffer memory assigned at phy:0x88100000, vir:0xefe00000, size=1024K
- [ 2.085851@0] osd_probe, mydef_var:c0816ff8, vinfo:c05e5870
- [ 2.091417@0] ---------------clear framebuffer1 memory
- [ 2.123327@0] osd probe ok
- [ 2.126463@0] DI: di_init
- [ 2.126500@0] DI: di_probe
- [ 2.126959@0] aml_wdt_driver_init,301
- [ 2.126982@0] ** disable watchdog
- [ 2.128512@0] keys===========================================
- [ 2.134008@0] keys_devno=f600000
- [ 2.137481@0] securitykey: device aml_keys created
- [ 2.142002@0] amlkeys=0
- [ 2.144517@0] platform_driver_register--aml_keys_driver--------------------
- [ 2.151730@0] set uart_ao pinmux use pinctrl subsystem
- [ 2.156488@0] P_AO_RTI_PIN_MUX_REG:1861
- [ 2.160372@0] start uart_ao_ttyS0:(irq = 122)
- [ 2.164652@0] register uart_ao ok
- [ 2.168215@0] start uart_a_ttyS1:(irq = 58)
- [ 2.172112@0] register uart_a ok
- [ 2.175544@0] start uart_d_ttyS4:(irq = 126)
- [ 2.179611@0] register uart_d ok
- [ 2.182925@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 2.187447@0] dwc_otg lm-root: dwc_otg_driver_probe(ee962c00)
- [ 2.187457@0] dwc_otg_driver_probe NOT match
- [ 2.191661@0] dwc_otg lm1: dwc_otg_driver_probe(ee962e00)
- [ 2.191679@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: f110842 0, ctrl: f32c0000
- [ 2.700089@0] USB (1) use clock source: XTAL input
- [ 2.701117@0] dwc_otg lm1: base=0xf32c0000
- [ 2.701124@0] dwc_otg lm1: dwc_otg_device=0xedd465c0
- [ 2.901118@0] Core Release: 2.94a
- [ 2.901142@0] Setting default values for core params
- [ 2.903748@0] curmode: 1, host_only: 1
- [ 2.907504@0] dwc_otg lm1: DMA config: BURST_DEFAULT
- [ 3.307554@0] Using Buffer DMA mode
- [ 3.307577@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 3.309914@0] Working on port type = HOST
- [ 3.313980@0] dwc_otg lm1: DWC OTG Controller
- [ 3.318294@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 3.324956@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 3.329903@0] -------hcd->flags.d32 = 0
- [ 3.333715@0] Init: Port Power? op_state=1
- [ 3.337796@0] Init1: Power Port (0)
- [ 3.341369@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.348226@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumbe r=1
- [ 3.355571@0] usb usb1: Product: DWC OTG Controller
- [ 3.360453@0] usb usb1: Manufacturer: Linux 3.10.61 dwc_otg_hcd
- [ 3.366337@0] usb usb1: SerialNumber: lm1
- [ 3.370870@0] hub 1-0:1.0: USB hub found
- [ 3.374243@0] hub 1-0:1.0: 1 port detected
- [ 3.378542@0] dwc_otg lm0: dwc_otg_driver_probe(ee963000)
- [ 3.378583@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: f110840 0, ctrl: f3240000
- [ 3.386921@0] dwc_otg lm0: base=0xf3240000
- [ 3.386929@0] dwc_otg lm0: dwc_otg_device=0xedd21f40
- [ 3.577048@0] Indeed it is in host mode hprt0 = 00021501
- [ 3.596996@1] Core Release: 2.94a
- [ 3.597041@1] Setting default values for core params
- [ 3.599625@1] curmode: 1, host_only: 0
- [ 3.757028@0] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.758237@0] Indeed it is in host mode hprt0 = 00001101
- [ 3.958163@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 3.959397@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber =0
- [ 3.966690@0] usb 1-1: Product: USB2.0 Hub
- [ 3.971466@0] hub 1-1:1.0: USB hub found
- [ 3.974937@0] hub 1-1:1.0: 4 ports detected
- [ 4.002893@1] dwc_otg lm0: DMA config: BURST_DEFAULT
- [ 4.402490@1] Using Buffer DMA mode
- [ 4.402514@1] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 4.404852@1] Working on port type = OTG
- [ 4.408766@1] Current port type: SLAVE
- [ 4.412557@1] dwc_otg lm0: DWC OTG Controller
- [ 4.416847@1] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 4.423550@1] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 4.428511@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.435407@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumbe r=1
- [ 4.442793@1] usb usb2: Product: DWC OTG Controller
- [ 4.447651@1] usb usb2: Manufacturer: Linux 3.10.61 dwc_otg_hcd
- [ 4.453547@1] usb usb2: SerialNumber: lm0
- [ 4.458061@1] hub 2-0:1.0: USB hub found
- [ 4.461454@1] hub 2-0:1.0: 1 port detected
- [ 4.465659@1] Dedicated Tx FIFOs mode
- [ 4.469355@1] using timer detect id change, eea15800
- [ 4.474242@1] Amlogic nand flash Kernel driver, Version K1.06.015 (c) 2010 Am logic Inc.
- [ 4.482131@1] ####Version of Uboot must be newer than U1.06.011!!!!!
- [ 4.488652@1] ===========================================m3_nand_probe:1230,n and device tree ok,dev-name:nand1
- [ 4.498529@1] m3_get_nand_platform:1682,find enable pad finished
- [ 4.504498@1] m3_get_nand_platform:1695,find busy_pad finished
- [ 4.510327@1] m3_get_nand_platform:1707,find timming_mode finished
- [ 4.516478@1] m3_get_nand_platform:1719,find bch_mode finished
- [ 4.522300@1] m3_get_nand_platform:1731,find plane_modefinished
- [ 4.528216@1] m3_get_nand_platform:1787,parse dts
- [ 4.532881@1] chip->controller=c08958c4
- [ 4.536703@1] ###plat->platform_nand_data.chip.nr_chips =2
- [ 4.542196@1] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10, system=5.0ns
- [ 4.550493@1] No NAND device found
- [ 4.553829@1] NAND device id: 2c 44 44 4b a9 0
- [ 4.558285@1] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron D rev ision NAND 4GiB MT29F32G08CBADA)
- [ 4.573807@1] 1 NAND chips detected
- [ 4.573875@1] aml_nand_init auto detect RB pin here and por_cfg:3dd
- [ 4.577922@1] aml_nand_init detect without RB pin here
- [ 4.582140@0] HOST mode
- [ 4.585447@1] #####aml_nand_init, none RB and chip->chip_delay:100
- [ 4.591622@1] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5. 0ns
- [ 4.598997@1] oob size is not enough for selected bch mode: NAND_BCH60_1K_MOD E force bch to mode: NAND_BCH40_1K_MODE
- [ 4.607016@0] -------hcd->flags.d32 = 0
- [ 4.607052@0] Init: Port Power? op_state=1
- [ 4.607054@0] Init1: Power Port (0)
- [ 4.607058@0] set usb port power on (board gpio 104)!
- [ 4.625907@1] aml_chip->oob_fill_cnt =168,aml_chip->oob_size =744,bch_bytes = 70
- [ 4.633194@1] multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGLE_PLANE_MODE
- [ 4.643699@1] oob layout use nand base oob layout oobsize = 32,oobmul =1,mtd ->oobsize =744,aml_chip->oob_size =744
- [ 4.669172@1] aml nand env valid addr: 28000
- [ 4.669199@1] CONFIG_ENV_SIZE=0x8000; ENV_SIZE=0x7ffc; bbt=0x1330; default_en vironment_size=0x0
- [ 4.684590@1] nand env: nand_env_probe.
- [ 4.684969@1] nand key: nand_key_probe.
- [ 4.686786@1] key start_blk=2040,end_blk=2047,aml_nand_key_init:595
- [ 4.701597@1] aml nand key valid addr: ff010000
- [ 4.701623@1] aml nand key valid addr: ff210000
- [ 4.705169@1] aml nand key valid addr: ff410000
- [ 4.709782@1] aml nand key valid addr: ff610000
- [ 4.714372@1] CONFIG_KEYSIZE=0x10000; KEYSIZE=0xfffc; bbt=0x1330; default_key ironment_size=0xeccc
- [ 4.714407@1] i=0,register --- nand_key
- [ 4.721575@1] Creating 4 MTD partitions on "D revision NAND 4GiB MT29F32G08CB ADA":
- [ 4.725748@1] 0x000000800000-0x000001000000 : "boot"
- [ 4.731655@1] 0x000001000000-0x000001800000 : "recovery"
- [ 4.736772@1] 0x000001800000-0x000002000000 : "logo"
- [ 4.741706@1] 0x000002000000-0x0000ff000000 : "data"
- [ 4.745886@1] NAND bbt detect factory Bad block at b400000
- [ 4.751551@1] NAND bbt detect factory Bad block at b600000
- [ 4.757193@1] NAND bbt detect Bad block at 21400000
- [ 4.763065@1] H▒▒▒E▒▒@P▒▒▒▒▒▒P▒▒▒▒▒▒豀▒@Q▒▒init_aml_nftl start
- [ 4.768712@1] mtd->name: data
- [ 4.771664@1] nftl version 131206a
- [ 4.775186@1] nftl part attr 0
- [ 4.778121@1] NAND bbt detect factory Bad block at b400000
- [ 4.783724@1] NAND bbt detect factory Bad block at b600000
- [ 4.789395@1] NAND bbt detect Bad block at 21400000
- [ 4.794565@1] size_in_blk 2024; total_block 2022;
- [ 4.799329@1] nftl start:2022,252
- [ 4.806302@1] first
- [ 4.832235@1] NAND bbt detect factory Bad block at b400000
- [ 4.832268@1] NAND bbt detect factory Bad block at b600000
- [ 4.895034@1] NAND bbt detect Bad block at 21400000
- [ 5.479821@1] second 0,1770
- [ 5.479842@1] all block full!!
- [ 5.480090@1] free block cnt = 2021
- [ 5.483478@1] nftl ok!
- [ 5.486112@1] aml_nftl_blk->mbd.tr.name =data
- [ 5.490984@1] data: unknown partition table
- [ 5.494687@1] aml_nftl_add_mtd ok
- [ 5.497743@1] init_aml_nftl end
- [ 5.500981@1] ethernet_driver probe!
- [ 5.504402@1] Please config phy interface.
- [ 5.508581@1] Please config savepowermode.
- [ 5.512643@1] Please config reset_pin_enable.
- [ 5.516983@1] Please config reset_delay.
- [ 5.520899@1] Please config reset_pin.
- [ 5.524621@1] Please config new_maclogic.
- [ 5.528626@1] ethernetinit(dbg[c0822d5c]=1)
- [ 5.532807@1] ethernet base addr is f3610000
- [ 5.537064@1] write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 5.545439@1] libphy: AMLMAC MII Bus: probed
- [ 5.547560@1] eth0: PHY ID 0007c0f1 at 1 IRQ -1 (0:01) active
- [ 5.555103@1] Amlogic A/V streaming port init
- [ 5.559721@1] init vdec memsource -1971322880->-1937768449
- [ 5.563278@1] [tsync_pcr_init]init success.
- [ 5.567369@1] amvideocap_init_module
- [ 5.570960@1] amvideocap_probe,amvideocap
- [ 5.574882@1] amvideocap_dev_register buf:8db00000,size:a00000.
- [ 5.581297@1] regist mpeg12 codec profile
- [ 5.584874@1] regist mpeg4 codec profile
- [ 5.588695@1] amvdec_vc1 module init
- [ 5.592344@1] regist vc1 codec profile
- [ 5.595971@1] amvdec_h264 module init
- [ 5.600077@1] regist h264 codec profile
- [ 5.603436@1] amvdec_h264mvc module init
- [ 5.607475@1] regist hmvc codec profile
- [ 5.611262@1] regist mjpeg codec profile
- [ 5.615067@1] amvdec_real module init
- [ 5.618846@1] regist real codec profile
- [ 5.622842@1] alloc_keep_buffer keep_y_addr ed400000
- [ 5.627523@1] alloc_keep_buffer keep_u_addr eda00000
- [ 5.632436@1] alloc_keep_buffer keep_v_addr ed980000
- [ 5.637388@1] yaddr=ed400000,u_addr=eda00000,v_addr=ed980000
- [ 5.643428@1] create_ge2d_work_queue video task ok
- [ 5.648416@1] efuse===========================================
- [ 5.653951@1] efuse: device efuse created
- [ 5.657828@1] efuse--------------------------------------------
- [ 5.663589@1] SARADC Driver init.
- [ 5.667102@1] __saradc_probe__
- [ 5.817125@1] saradc calibration: ref_val = 513
- [ 5.817150@1] saradc calibration: ref_nominal = 512
- [ 5.820870@1] saradc calibration: coef = 4161
- [ 5.825331@1] ADC Keypad Driver init.
- [ 5.828941@1] ==kp_probe==
- [ 5.831567@1] chan #4 used for ADC key
- [ 5.835280@1] menu key(139) registed.
- [ 5.838949@1] vol- key(114) registed.
- [ 5.842571@1] vol+ key(115) registed.
- [ 5.846216@1] back key(158) registed.
- [ 5.849877@1] home key(102) registed.
- [ 5.853508@1] ok key(232) registed.
- [ 5.857182@1] input: adc_keypad as /devices/platform/adc_keypad.3/input/input 0
- [ 5.864394@1] adc keypad register input device completed.
- [ 5.869677@1] adc keypad major:241
- [ 5.873452@1] Meson KeyInput init
- [ 5.876508@1] Key 116 registed.
- [ 5.879766@1] input: key_input as /devices/platform/key_input.4/input/input1
- [ 5.886743@1] Meson KeyInput register RTC interrupt
- [ 5.891306@1] Meson KeyInput major=240
- [ 5.895512@1] spi_nor_init
- [ 5.898062@1] amlogic_spi_nor_probe:
- [ 5.901426@1] amlogic_spi->state_name:default
- [ 5.905946@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is depre cated
- [ 5.913481@1] check_storage_device : spi boot_device_flag : 0
- [ 5.919052@1] spi_nor_probe
- [ 5.921859@1] spi_nor apollospi:32766: mx25l3205d (4096 Kbytes)
- [ 5.928044@1] Creating 2 MTD partitions on "apollospi:32766":
- [ 5.933455@1] 0x000000000000-0x000000100000 : "bootloader"
- [ 5.939786@1] 0x000000100000-0x000000108000 : "ubootenv"
- [ 5.944983@1] amlogic_spi_nor_probe over
- [ 5.948347@1] mmc driver version: 1.07, 2014-09-23: eMMC fix the SDIO data1 i nterrupt caused timeout error problem
- [ 5.959486@1] host->base f1108c20
- [ 5.961778@1] pdata->caps 7
- [ 5.964526@1] pdata->caps2 0
- [ 5.967423@1] get property: port, value:0x00000001
- [ 5.973900@1] get property: ocr_avail, value:0x00200000
- [ 5.980558@1] get property: f_min, value:0x000493e0
- [ 5.986920@1] get property: f_max, value:0x02faf080
- [ 5.993441@1] get property: f_max_w, value:0x02faf080
- [ 5.999957@1] get property: max_req_size, value:0x00020000
- [ 6.006450@1] get property: irq_in, value:0x00000005
- [ 6.012986@1] get property: irq_out, value:0x00000006
- [ 6.019488@1] get property: power_level, value:0x00000000
- [ 6.025985@1] get property: gpio_cd, str:CARD_6
- [ 6.032104@1] get property: gpio_power, str:CARD_8
- [ 6.037968@1] get property: pinname, str:sd
- [ 6.043601@1] get property: card_type, value:0x00000005
- [ 6.050121@1] get property: gpio_dat3, str:CARD_3
- [ 6.056122@1] normal card in
- [ 6.097082@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 6.097213@1] pdata->caps 107
- [ 6.097216@1] pdata->caps2 0
- [ 6.097220@1] get property: port, value:0x00000000
- [ 6.097223@1] get property: ocr_avail, value:0x00200000
- [ 6.097226@1] get property: f_min, value:0x000493e0
- [ 6.097228@1] get property: f_max, value:0x02faf080
- [ 6.097231@1] get property: f_max_w, value:0x02faf080
- [ 6.097234@1] get property: max_req_size, value:0x00020000
- [ 6.097240@1] get property: pinname, str:sdio
- [ 6.097244@1] get property: card_type, value:0x00000003
- [ 6.201835@0] sd: SD Status: Invalid Allocation Unit size.
- [ 6.205239@0] sd: new high speed SDXC card at address 0001, clock 50000000, 4 -bit-bus-width
- [ 6.210431@0] mmcblk0: sd:0001 00000 58.5 GiB
- [ 6.237650@0] mmcblk0: p1
- [ 6.307033@0] [aml_sdio_probe] aml_sdio_probe() success!
- [ 6.307305@0] [dsp]DSP start addr 0xc5000000
- [ 6.310995@0] [dsp]register dsp to char divece(257)
- [ 6.316251@0] name=nand_key nand_key
- [ 6.319468@0] read:addr:0xff010000,phy_blk_addr:2040,phy_page_addr:8,aml_nand _get_key:129
- [ 6.331058@0] register_aes_algorithm:482,old way
- [ 6.332162@0] unkown current key-name,key_read_show:1396
- [ 6.337476@0] get keyexample fail, aml_rtc_probe:750
- [ 6.343276@0] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
- [ 6.350408@0] wetek-dvb dvb.8: Found Wetek i2c-1 adapter ...
- [ 6.354100@0] wetek-dvb dvb.8: Found Wetek i2c-2 adapter ...
- [ 6.359795@0] wetek-dvb dvb.8: ts0: parallel
- [ 6.364101@0] wetek-dvb dvb.8: ts2: parallel
- [ 7.187024@0] wetek-dvb dvb.8: Wetek NIM(s) detection in progress ...
- [ 7.187830@0] wetek-dvb dvb.8: Checking for Sony CXD2837 DVB-C/T/T2 demod ...
- [ 7.195021@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x6c
- [ 7.203962@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x6c
- [ 7.212893@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x6c
- [ 7.221792@0] i2c i2c-1: i2c wr failed=-11 reg=00
- [ 7.226589@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x6e
- [ 7.235545@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x6e
- [ 7.244496@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x6e
- [ 7.253385@0] i2c i2c-1: i2c wr failed=-11 reg=00
- [ 7.258162@0] wetek-dvb dvb.8: Checking for Panasonic MN88436 ATSC demod ...
- [ 7.265222@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x18
- [ 7.274171@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x18
- [ 7.283114@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0x18
- [ 7.292017@0] i2c i2c-1: i2c wr failed=-11 reg=10
- [ 7.296767@0] wetek-dvb dvb.8: Checking for AVL6211 DVB-S/S2 demod ...
- [ 7.303610@0] i2c i2c-1: AVL6211+AV2011 DVB-S/S2 successfully attached
- [ 7.309806@0] wetek-dvb dvb.8: Checking for AVL6211 DVB-S/S2 demod ...
- [ 7.316606@0] i2c i2c-2: AVL6211+AV2011 DVB-S/S2 successfully attached
- [ 7.322826@0] wetek-dvb dvb.8: Total Wetek NIM(s) found: 2
- [ 7.329158@0] UMP: UMP device driver loaded
- [ 7.332525@0] aml_hw_crypto initialization.
- [ 7.337526@0] usbcore: registered new interface driver snd-usb-audio
- [ 7.343597@0] dummy_codec_platform_probe
- [ 7.347172@0] enter aml_dai_probe
- [ 7.347621@0] enter dummy_codec_audio_probe
- [ 7.351281@0] soc-audio soc-audio: ASoC: machine AML-DUMMY-CODEC should use s nd_soc_register_card()
- [ 7.360494@0] rtd edd4a010
- [ 7.362906@0] cpu_dai ee9b1100
- [ 7.366040@0] codec_dai ee9b1400
- [ 7.369368@0] enter aml_platform_pcm_new (codec_dai: dummy_codec 1 cpu_dai: a ml-dai0 0)
- [ 7.369935@0] aml-pcm 0:playback preallocate_dma_buffer: area=efc52000, addr= ad940000, size=131072
- [ 7.379501@0] iec958 0: preallocate dma buffer start=efce9000, size=80000
- [ 7.385806@0] aml-pcm 1:capture preallocate_dma_buffer: area=efd6a000, addr=a dc00000, size=65536
- [ 7.393903@0] soc-audio soc-audio: dummy_codec <-> aml-dai0 mapping ok
- [ 7.401430@0] =dummy_codec_device_init==,dummy_codec_audio init done
- [ 7.406996@0] nf_conntrack version 0.5.0 (13700 buckets, 54800 max)
- [ 7.413741@0] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.418576@0] TCP: cubic registered
- [ 7.421934@0] NET: Registered protocol family 17
- [ 7.426567@0] NET: Registered protocol family 15
- [ 7.431299@0] Key type dns_resolver registered
- [ 7.435863@0] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 7.443393@0] Registering SWP/SWPB emulation handler
- [ 7.448348@0] enter meson_pm_init
- [ 7.451813@0] enter meson_pm_probe!
- [ 7.455090@0] meson_pm_probe done !
- [ 7.459804@0] regulator-dummy: disabling
- [ 7.462996@0] UBI: attaching mtd3 to ubi0
- [ 7.528314@0] NAND bbt detect factory Bad block at b400000
- [ 7.528348@0] NAND bbt detect factory Bad block at b600000
- [ 7.673701@0] NAND bbt detect Bad block at 21400000
- [ 9.104824@0] UBI: scanning is finished
- [ 9.110608@0] UBI: attached mtd3 (name "data", size 4048 MiB) to ubi0
- [ 9.111414@0] UBI: PEB size: 2097152 bytes (2048 KiB), LEB size: 2080768 byte s
- [ 9.118672@0] UBI: min./max. I/O unit sizes: 8192/8192, sub-page size 8192
- [ 9.125488@0] UBI: VID header offset: 8192 (aligned 8192), data offset: 16384
- [ 9.132616@0] UBI: good PEBs: 2021, bad PEBs: 3, corrupted PEBs: 0
- [ 9.138778@0] UBI: user volume: 4, internal volumes: 1, max. volumes count: 1 28
- [ 9.146052@0] UBI: max/mean erase counter: 351/41, WL threshold: 4096, image sequence number: 178184819
- [ 9.155445@0] UBI: available PEBs: 106, total reserved PEBs: 1915, PEBs reser ved for bad PEB handling: 37
- [ 9.165010@1] UBI: background thread "ubi_bgt0d" started, PID 973
- [ 9.171061@0] aml_rtc rtc.0: setting system clock to 2015-01-29 14:35:39 UTC (1422542139)
- [ 9.179351@0] meson_cpufreq: no voltage_control prop
- [ 9.184160@0] voltage_control = 0
- [ 9.187641@0] ------------[ cut here ]------------
- [ 9.192237@0] WARNING: at kernel/smp.c:382 smp_call_function_many+0x2bc/0x2c8 ()
- [ 9.199510@0] Modules linked in:
- [ 9.202726@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.61 #11
- [ 9.209001@0] [<c0014b54>] (unwind_backtrace+0x0/0xec) from [<c0011c08>] (sho w_stack+0x10/0x14)
- [ 9.217667@0] [<c0011c08>] (show_stack+0x10/0x14) from [<c002af00>] (warn_slo wpath_common+0x54/0x6c)
- [ 9.226772@0] [<c002af00>] (warn_slowpath_common+0x54/0x6c) from [<c002afb4>] (warn_slowpath_null+0x1c/0x24)
- [ 9.236579@0] [<c002afb4>] (warn_slowpath_null+0x1c/0x24) from [<c006fd4c>] ( smp_call_function_many+0x2bc/0x2c8)
- [ 9.246736@0] [<c006fd4c>] (smp_call_function_many+0x2bc/0x2c8) from [<c006fd 90>] (smp_call_function+0x38/0x6c)
- [ 9.256803@0] [<c006fd90>] (smp_call_function+0x38/0x6c) from [<c001b6d8>] (c lk_set_rate_a9+0xac/0xec)
- [ 9.266091@0] [<c001b6d8>] (clk_set_rate_a9+0xac/0xec) from [<c001bc04>] (mes on_clk_set_rate+0x134/0x184)
- [ 9.275637@0] [<c001bc04>] (meson_clk_set_rate+0x134/0x184) from [<c001bcf4>] (clk_set_rate+0xa0/0xc4)
- [ 9.284934@0] [<c001bcf4>] (clk_set_rate+0xa0/0xc4) from [<c0387ebc>] (meson_ cpufreq_target_locked.isra.1+0x130/0x1e0)
- [ 9.295606@0] [<c0387ebc>] (meson_cpufreq_target_locked.isra.1+0x130/0x1e0) f rom [<c0387f90>] (meson_cpufreq_target+0x24/0x3c)
- [ 9.306977@0] [<c0387f90>] (meson_cpufreq_target+0x24/0x3c) from [<c031599c>] (dbs_check_cpu+0x1f8/0x28c)
- [ 9.316522@0] [<c031599c>] (dbs_check_cpu+0x1f8/0x28c) from [<c0316098>] (cpu freq_governor_dbs+0x588/0x960)
- [ 9.326250@0] [<c0316098>] (cpufreq_governor_dbs+0x588/0x960) from [<c03121b8 >] (__cpufreq_governor+0x78/0x1f0)
- [ 9.336313@0] [<c03121b8>] (__cpufreq_governor+0x78/0x1f0) from [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c)
- [ 9.346381@0] [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c) from [<c0312798 >] (cpufreq_add_dev_interface+0x24c/0x2a0)
- [ 9.357144@0] [<c0312798>] (cpufreq_add_dev_interface+0x24c/0x2a0) from [<c03 12b70>] (cpufreq_add_dev+0x384/0x4f4)
- [ 9.367481@0] [<c0312b70>] (cpufreq_add_dev+0x384/0x4f4) from [<c0282700>] (s ubsys_interface_register+0x94/0xd8)
- [ 9.377632@0] [<c0282700>] (subsys_interface_register+0x94/0xd8) from [<c0311 778>] (cpufreq_register_driver+0x88/0x190)
- [ 9.388394@0] [<c0311778>] (cpufreq_register_driver+0x88/0x190) from [<c0283d d8>] (driver_probe_device+0x7c/0x22c)
- [ 9.398722@0] [<c0283dd8>] (driver_probe_device+0x7c/0x22c) from [<c0284058>] (__driver_attach+0x8c/0x90)
- [ 9.408270@0] [<c0284058>] (__driver_attach+0x8c/0x90) from [<c02822e8>] (bus _for_each_dev+0x68/0x9c)
- [ 9.417470@0] [<c02822e8>] (bus_for_each_dev+0x68/0x9c) from [<c02835f8>] (bu s_add_driver+0x1c0/0x24c)
- [ 9.426758@0] [<c02835f8>] (bus_add_driver+0x1c0/0x24c) from [<c0284644>] (dr iver_register+0x78/0x140)
- [ 9.436046@0] [<c0284644>] (driver_register+0x78/0x140) from [<c0285674>] (pl atform_driver_probe+0x18/0xa0)
- [ 9.445767@0] [<c0285674>] (platform_driver_probe+0x18/0xa0) from [<c00085c4> ] (do_one_initcall+0x100/0x160)
- [ 9.455580@0] [<c00085c4>] (do_one_initcall+0x100/0x160) from [<c07b4bc8>] (k ernel_init_freeable+0x138/0x1d8)
- [ 9.465478@0] [<c07b4bc8>] (kernel_init_freeable+0x138/0x1d8) from [<c05a4674 >] (kernel_init+0xc/0x160)
- [ 9.474848@0] [<c05a4674>] (kernel_init+0xc/0x160) from [<c000e058>] (ret_fro m_fork+0x14/0x3c)
- [ 9.483435@0] ---[ end trace f7cf6a6749a1f3ed ]---
- [ 9.488208@0] ------------[ cut here ]------------
- [ 9.492985@0] WARNING: at kernel/smp.c:244 smp_call_function_single+0x164/0x1 d8()
- [ 9.500444@0] Modules linked in:
- [ 9.503659@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.61 #1 1
- [ 9.510869@0] [<c0014b54>] (unwind_backtrace+0x0/0xec) from [<c0011c08>] (sho w_stack+0x10/0x14)
- [ 9.519549@0] [<c0011c08>] (show_stack+0x10/0x14) from [<c002af00>] (warn_slo wpath_common+0x54/0x6c)
- [ 9.528662@0] [<c002af00>] (warn_slowpath_common+0x54/0x6c) from [<c002afb4>] (warn_slowpath_null+0x1c/0x24)
- [ 9.538470@0] [<c002afb4>] (warn_slowpath_null+0x1c/0x24) from [<c006f8e8>] ( smp_call_function_single+0x164/0x1d8)
- [ 9.548798@0] [<c006f8e8>] (smp_call_function_single+0x164/0x1d8) from [<c006 fd90>] (smp_call_function+0x38/0x6c)
- [ 9.559040@0] [<c006fd90>] (smp_call_function+0x38/0x6c) from [<c001b6d8>] (c lk_set_rate_a9+0xac/0xec)
- [ 9.568327@0] [<c001b6d8>] (clk_set_rate_a9+0xac/0xec) from [<c001bc04>] (mes on_clk_set_rate+0x134/0x184)
- [ 9.577875@0] [<c001bc04>] (meson_clk_set_rate+0x134/0x184) from [<c001bcf4>] (clk_set_rate+0xa0/0xc4)
- [ 9.587165@0] [<c001bcf4>] (clk_set_rate+0xa0/0xc4) from [<c0387ebc>] (meson_ cpufreq_target_locked.isra.1+0x130/0x1e0)
- [ 9.597841@0] [<c0387ebc>] (meson_cpufreq_target_locked.isra.1+0x130/0x1e0) f rom [<c0387f90>] (meson_cpufreq_target+0x24/0x3c)
- [ 9.609211@0] [<c0387f90>] (meson_cpufreq_target+0x24/0x3c) from [<c031599c>] (dbs_check_cpu+0x1f8/0x28c)
- [ 9.618758@0] [<c031599c>] (dbs_check_cpu+0x1f8/0x28c) from [<c0316098>] (cpu freq_governor_dbs+0x588/0x960)
- [ 9.628482@0] [<c0316098>] (cpufreq_governor_dbs+0x588/0x960) from [<c03121b8 >] (__cpufreq_governor+0x78/0x1f0)
- [ 9.638549@0] [<c03121b8>] (__cpufreq_governor+0x78/0x1f0) from [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c)
- [ 9.648618@0] [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c) from [<c0312798 >] (cpufreq_add_dev_interface+0x24c/0x2a0)
- [ 9.659381@0] [<c0312798>] (cpufreq_add_dev_interface+0x24c/0x2a0) from [<c03 12b70>] (cpufreq_add_dev+0x384/0x4f4)
- [ 9.669711@0] [<c0312b70>] (cpufreq_add_dev+0x384/0x4f4) from [<c0282700>] (s ubsys_interface_register+0x94/0xd8)
- [ 9.679866@0] [<c0282700>] (subsys_interface_register+0x94/0xd8) from [<c0311 778>] (cpufreq_register_driver+0x88/0x190)
- [ 9.690631@0] [<c0311778>] (cpufreq_register_driver+0x88/0x190) from [<c0283d d8>] (driver_probe_device+0x7c/0x22c)
- [ 9.700959@0] [<c0283dd8>] (driver_probe_device+0x7c/0x22c) from [<c0284058>] (__driver_attach+0x8c/0x90)
- [ 9.710506@0] [<c0284058>] (__driver_attach+0x8c/0x90) from [<c02822e8>] (bus _for_each_dev+0x68/0x9c)
- [ 9.719707@0] [<c02822e8>] (bus_for_each_dev+0x68/0x9c) from [<c02835f8>] (bu s_add_driver+0x1c0/0x24c)
- [ 9.728995@0] [<c02835f8>] (bus_add_driver+0x1c0/0x24c) from [<c0284644>] (dr iver_register+0x78/0x140)
- [ 9.738283@0] [<c0284644>] (driver_register+0x78/0x140) from [<c0285674>] (pl atform_driver_probe+0x18/0xa0)
- [ 9.748004@0] [<c0285674>] (platform_driver_probe+0x18/0xa0) from [<c00085c4> ] (do_one_initcall+0x100/0x160)
- [ 9.757813@0] [<c00085c4>] (do_one_initcall+0x100/0x160) from [<c07b4bc8>] (k ernel_init_freeable+0x138/0x1d8)
- [ 9.767710@0] [<c07b4bc8>] (kernel_init_freeable+0x138/0x1d8) from [<c05a4674 >] (kernel_init+0xc/0x160)
- [ 9.777083@0] [<c05a4674>] (kernel_init+0xc/0x160) from [<c000e058>] (ret_fro m_fork+0x14/0x3c)
- [ 9.785670@0] ---[ end trace f7cf6a6749a1f3ee ]---
- [ 9.791018@0] hdmitx: cec: CEC init
- [ 9.794188@0] hdmitx: cec: CEC task process
- [ 9.798141@0] input: cec_input as /devices/virtual/input/input2
- [ 9.804195@0] hdmitx: cec: hdmitx_device->cec_init_ready:0x1dhd_module_init: Enter
- [ 9.811540@0] wifi_setup_dt
- [ 9.814319@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi
- [ 9.819903@0] clock_32k_pin(53) : (null)
- [ 9.823802@0] clock_32k_pin(53) : sdio_wifi
- [ 9.828270@0] interrupt_pin(52) : (null)
- [ 9.831855@0] wifi_dt : gpio op failed(-1) at line 250
- [ 9.836976@0] interrupt_pin(52) : sdio_wifi
- [ 9.841159@0] power_on_pin(112) : (null)
- [ 9.845056@0] power_on_pin(112) : sdio_wifi
- [ 9.849231@0] bt_setup
- [ 9.997096@0] WIFI Disable! 112
- [ 10.261814@0] WIFI Enable! 112
- [ 10.556091@0] sdio: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 11.557355@0] [aml_sdio_timeout] time_start_cnt:1000
- [ 11.557355@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, v irqc=0x3f003f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, p data->width=0, conf=0x416270f9, clock=400000
- [ 11.557355@0] [aml_sdio_timeout] time_start_cnt:994
- [ 11.557355@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x1 3, virqc=0x3f003f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width= 0, pdata->width=0, conf=0x416270f9, clock=400000
- [ 11.557355@0] [aml_sdio_timeout] time_start_cnt:990
- [ 11.557355@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, vir qc=0x1f001f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pda ta->width=0, conf=0x416270f9, clock=400000
- [ 13.597717@0] <4>[ 13.639666@0] sdio: queuing unknown CIS tuple 0x80 (2 byt es)
- [ 13.642685@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 13.648541@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 13.655914@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 13.711730@0] sdio: new high speed SDIO card at address 0001, clock 50000000, 4-bit-bus-width
- [ 13.720164@0] [sdio_reinit] finish
- [ 13.720668@0] =========== WLAN placed in POWER ON ========
- [ 13.728446@0] bcmsdh_register: Linux Kernel SDIO/MMC Driver
- [ 13.730810@0] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
- [ 13.745172@0] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
- [ 13.778689@0] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
- [ 13.789490@0] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
- [ 13.798962@0] dhdsdio_probe: Disable prop_txstatus
- [ 13.804207@0] wl_create_event_handler(): thread:wl_event_handler:3d9 started
- [ 13.804292@1] tsk Enter, tsk = 0xefdc44cc
- [ 13.810280@0] init wlan_priv_wake
- [ 13.813560@0] dhd_attach(): thread:dhd_watchdog_thread:3da started
- [ 13.827664@1] dhd_attach(): thread:dhd_dpc:3db started
- [ 13.828436@1] dhd_attach(): thread:dhd_sysioc:3dc started
- [ 13.833575@0] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00 :90:4c:11:22:33
- [ 13.841144@0] =========== WLAN placed in RESET ========
- [ 13.846239@0] init wifi power_wake lock
- [ 13.850185@0]
- [ 13.850185@0] Dongle Host Driver, version 1.88.45.4 (r420671)
- [ 13.850185@0] Compiled in drivers/net/wireless/bcmdhd on Nov 15 2015 at 14:50 :14
- [ 13.864836@0] dhd_module_init: Exit error=0
- [ 13.869085@0] ALSA device list:
- [ 13.872092@0] #0: AML-DUMMY-CODEC
- [ 13.875789@0] config uart_ao_ttyS0:: Character length 8bits/char
- [ 13.887032@0] Changing uart_ao_ttyS0: baud from 0 to 115200
- [ 13.907170@0] Freeing unused kernel memory: 168K (c07b4000 - c07de000)
- [ 14.597028@0] Connect Timeout
- [ 14.597078@0] Device Not Connected/Responding
- [ 16.082984@1] UBIFS: static UBI volume - read-only mode
- [ 16.421692@1] UBIFS: mounted UBI device 0, volume 1, name "rootfs", R/O mode
- [ 16.423105@1] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit s izes: 8192 bytes/8192 bytes
- [ 16.432592@1] UBIFS: FS size: 31211520 bytes (29 MiB, 15 LEBs), journal size 18726913 bytes (17 MiB, 9 LEBs)
- [ 16.442516@1] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 16.447593@1] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 527C9EBE-B0E 8-44D7-ABC2-E753370B489F, small LPT model
- [ 16.748807@0] unionfs: new lower inode mtime (bindex=1, name=var)
- [ 16.754177@0] unionfs: new lower inode mtime (bindex=1, name=var)
- [ 16.882597@1] wetekdvb: module license 'Proprietary' taints kernel.
- [ 16.882611@1] Disabling lock debugging due to kernel taint
- [ 16.883575@1] wetek-dvb dvb.8: Loading ...
- [ 17.217593@1] DVB: registering new adapter (WetekPlay_DVB)
- [ 17.217623@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availin k AVL6211+AV2011 DVB-S/S2)...
- [ 17.228372@0] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availin k AVL6211+AV2011 DVB-S/S2)...
- [ 17.239450@0] wetek-dvb dvb.8: fifo0/2097152/1048576
- [ 17.244531@0] wetek-dvb dvb.8: FLUSH FIFO0
- [ 17.244552@0] wetek-dvb dvb.8: FLUSH ok
- [ 17.244599@0] wetek-dvb dvb.8: fifo1/2097152/1048576
- [ 17.249363@1] wetek-dvb dvb.8: FLUSH FIFO1
- [ 17.249384@1] wetek-dvb dvb.8: FLUSH ok
- [ 17.249394@1] wetek-dvb dvb.8: Loading finished
- [ 17.316805@1] UBIFS: background thread "ubifs_bgt0_2" started, PID 1050
- [ 17.501512@0] UBIFS: recovery needed
- [ 18.544284@0] UBIFS: recovery completed
- [ 18.544402@0] UBIFS: mounted UBI device 0, volume 2, name "persist"
- [ 18.544410@0] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit s izes: 8192 bytes/8192 bytes
- [ 18.544418@0] UBIFS: FS size: 18726912 bytes (17 MiB, 9 LEBs), journal size 1 4565377 bytes (13 MiB, 5 LEBs)
- [ 18.544423@0] UBIFS: reserved for root: 884517 bytes (863 KiB)
- [ 18.544433@0] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 19B3FF86-1B2 C-43F1-8D0F-88EE0EB56DC5, small LPT model
- [ 18.610961@0] force enable DISCARD here for ext4 fs
- [ 18.610983@0] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature inco mpatibilities
- [ 18.611485@0] force enable DISCARD here for ext4 fs
- [ 18.611496@0] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature inco mpatibilities
- [ 18.611926@0] force enable DISCARD here for ext4 fs
- [ 20.918529@1] EXT4-fs (mmcblk0p1): recovery complete
- [ 20.921199@1] checked enable EXT4 DISCARD here
- [ 20.921309@1] EXT4-fs (mmcblk0p1): mounting with "discard" option, but the de vice does not support discard
- [ 20.921405@1] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 21.500255@1] netdev_open
- [ 21.500275@1] Ethernet reset
- [ 21.500283@1] NET MDA descpter start addr=ee96a000
- [ 21.501154@1] phy_interface = 1
- [ 21.501173@1] aml_phy_init: trying to attach to 0:01
- [ 21.501218@1] /**************************************amlogic 8720 phy driver init********************************************/
- [ 21.501282@1] --1--write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 21.501303@1] --2--write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 21.501317@1] write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 21.501332@1] Current DMA mode=0, set mode=621c100
- [ 21.501370@1] eth0: opened (irq 40).
- [ 21.501378@1] ether leave promiscuous mode
- [ 21.501383@1] ether leave all muticast mode
- [ 21.501437@1] changed the Multicast,mcount=1
- [ 21.501448@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 21.501453@1] set hash low=0,high=1
- [ 21.501457@1] changed the filter setting to :4
- [ 21.699520@0] dhd_open: Enter edd4c000
- [ 21.699551@0]
- [ 21.699551@0] Dongle Host Driver, version 1.88.45.4 (r420671)
- [ 21.699551@0] Compiled in drivers/net/wireless/bcmdhd on Nov 15 2015 at 14:50 :14
- [ 21.699564@0] wl_android_wifi_on in 1
- [ 21.699572@0] wl_android_wifi_on in 2: g_wifi_on=0
- [ 21.699597@0] WIFI Disable! 112
- [ 21.949866@0] WIFI Enable! 112
- [ 22.244196@0] sdio_reset_comm():
- [ 22.259662@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 22.261428@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 22.263189@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 22.266356@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 22.281946@0] [sdio_reinit] finish
- [ 22.394083@1] =========== WLAN going back to live ========
- [ 22.394476@0]
- [ 22.394476@0]
- [ 22.394476@0] dhd_bus_devreset: == WLAN ON ==
- [ 22.394489@0] dhd_bus_devreset called when dongle is not in reset
- [ 22.394494@0] Will call dhd_bus_start instead
- [ 22.394555@0] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
- [ 22.394711@0] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/ fw_bcm40181a2.bin
- [ 22.397561@0] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/con fig.txt
- [ 22.397575@0] Final fw_path=/lib/firmware/brcm/fw_bcm40181a2.bin
- [ 22.397581@0] Final nv_path=/lib/firmware/brcm/ap6210-nvram.txt
- [ 22.397587@0] Final conf_path=/lib/firmware/brcm/config.txt
- [ 22.454433@0] NVRAM version: GB9662_NVRAM_V1.3_12142012
- [ 22.455103@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succe eded.
- [ 22.455758@0] dhd_bus_init: delay 100ms for BCM43362
- [ 22.682743@0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 22.682917@0] bcmsdh_set_drvdata: Enter
- [ 22.682929@0] bcmsdh_register_oob_intr: Enter
- [ 22.682938@0] bcmsdh_register_oob_intr: IRQ=100 Type=414
- [ 22.684642@0] dhd_conf_set_band: Set band 0
- [ 22.686366@1] Firmware up: op_mode=0x0002, Broadcom Dongle Host Driver mac=02 :1a:11:fd:e5:3c
- [ 22.686378@1] dhd_conf_set_country: Set country ALL, revision 0
- [ 22.784346@1] Country code: ALL (ALL/0)
- [ 22.784814@1] dhd_conf_set_roam: Set roam_off 1
- [ 22.787396@0] dhdcdc_set_ioctl: msg->status:ffffffe9
- [ 22.787415@0] dhd_preinit_ioctls buf_key_b4_m4 set failed -23
- [ 22.791213@1] dhdcdc_set_ioctl: msg->status:ffffffe9
- [ 22.791728@1] Driver: 1.88.45.4 (r420671)
- [ 22.791728@1] Firmware: wl0: Dec 10 2012 15:10:32 version 5.90.195.89.1_edo n/off_0xb8bf FWID 01-0
- [ 22.792315@1] wl_android_wifi_on: Success
- [ 22.802900@1] dhd_open: Exit ret=0
- [ 23.233264@1] device wlan0 entered promiscuous mode
- [ 23.233518@1] br0: port 1(wlan0) entered forwarding state
- [ 23.233538@1] br0: port 1(wlan0) entered forwarding state
- [ 23.245746@1] Disconnect STA : ff:ff:ff:ff:ff:ff scb_val.val 3
- [ 23.254042@1] netdev_ifidx(3), chan_type(1) target channel(6)
- [ 23.320162@1] CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
- [ 23.320187@1] CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
- [ 23.384856@1] unionfs: new lower inode mtime (bindex=1, name=var)
- [ 24.139245@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 0, master _no(1) 300K addr 0xc
- [ 24.139310@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master _no(1) 300K addr 0xc
- [ 24.139583@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 0, master _no(1) 300K addr 0xc
- [ 24.139594@1] i2c i2c-1: i2c wr failed=-11
- [ 24.247422@1] i2c i2c-1: Uploading demod firmware (dvb-fe-avl6211.fw)...
- [ 24.467214@0] unionfs: new lower inode mtime (bindex=1, name=usr)
- [ 24.467269@0] unionfs: new lower inode mtime (bindex=1, name=lib)
- [ 24.497202@1] libphy: 0:01 - Link is Up - 100/Full
- [ 24.870421@0] changed the Multicast,mcount=1
- [ 24.870457@0] add mac address:01:00:5e:00:00:01,bit=32
- [ 24.880642@1] changed the Multicast,mcount=1
- [ 24.880670@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 24.998273@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.121338@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.121439@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 25.144143@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.172028@1] changed the Multicast,mcount=1
- [ 25.172049@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 25.175470@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 25.547301@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.650782@0] i2c i2c-1: AVL6211+AV2011 init OK
- [ 25.678110@0] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=14 89000 symbol_rate=11719000
- [ 25.678606@1] wetek-dvb dvb.8: start_feed_dmx0
- [ 25.678620@1] wetek-dvb dvb.8: FLUSH FIFO0
- [ 25.678629@1] wetek-dvb dvb.8: FLUSH ok
- [ 25.678636@1] wetek-dvb dvb.8: FIFO0<->0
- [ 25.737147@0] i2c i2c-1: BF is 64,BW is 10688
- [ 26.029171@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 26.197438@0] i2c i2c-1: Tuner successfully lock!
- [ 26.324058@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 26.329931@1] unionfs: new lower inode mtime (bindex=1, name=xml)
- [ 26.357441@0] i2c i2c-1: Service locked!!!
- [ 26.411620@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 26.420367@0] unionfs: new lower inode mtime (bindex=1, name=email)
- [ 26.458912@1] unionfs: new lower inode mtime (bindex=1, name=xml)
- [ 27.208638@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 27.257905@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 27.289288@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 27.406334@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 27.614610@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 27.627892@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 27.839308@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 27.945169@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 28.041527@0] unionfs: new lower inode mtime (bindex=1, name=webassets)
- [ 28.177432@0] unionfs: new lower inode mtime (bindex=1, name=filter)
- [ 28.300044@0] unionfs: new lower inode mtime (bindex=1, name=filter)
- [ 28.367912@0] unionfs: new lower inode mtime (bindex=1, name=filter)
- [ 29.011084@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 29.229086@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 29.270930@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 29.615280@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 29.774463@0] unionfs: new lower inode mtime (bindex=1, name=mako)
- [ 29.817939@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 30.123259@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.140831@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.150146@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.170506@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.421769@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.428378@0] unionfs: new lower inode mtime (bindex=1, name=migrations)
- [ 30.442410@0] unionfs: new lower inode mtime (bindex=1, name=migrations)
- [ 30.734833@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.744516@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.755076@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.851602@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.907296@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 31.026374@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 31.082541@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 31.307943@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 38.237027@1] br0: port 1(wlan0) entered forwarding state
- [ 79.088945@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=14 89000 symbol_rate=11719000
- [ 79.147421@1] i2c i2c-1: BF is 64,BW is 10688
- [ 79.667358@0] i2c i2c-1: Tuner successfully lock!
- [ 79.807400@0] i2c i2c-1: Service locked!!!
- outernet@outernet:~$ /etc/init
- init.d/ inittab
- outernet@outernet:~$ /etc/init
- init.d/ inittab
- outernet@outernet:~$ /etc/init.d/
- S01logging S11modules S20mount S41firewall S45hostapd S50dropbear S80ondd S90librarian rc.0
- S10mdev S15watchdog S40network S42dnsmasq S49ntp S50lighttpd S85wptdm S91monitoring rc.S
- outernet@outernet:~$ /etc/init.d/
- S01logging S11modules S20mount S41firewall S45hostapd S50dropbear S80ondd S90librarian rc.0
- S10mdev S15watchdog S40network S42dnsmasq S49ntp S50lighttpd S85wptdm S91monitoring rc.S
- outernet@outernet:~$ /etc/init.d/
- S01logging S11modules S20mount S41firewall S45hostapd S50dropbear S80ondd S90librarian rc.0
- S10mdev S15watchdog S40network S42dnsmasq S49ntp S50lighttpd S85wptdm S91monitoring rc.S
- outernet@outernet:~$ /etc/init.d/
- S01logging S11modules S20mount S41firewall S45hostapd S50dropbear S80ondd S90librarian rc.0
- S10mdev S15watchdog S40network S42dnsmasq S49ntp S50lighttpd S85wptdm S91monitoring rc.S
- outernet@outernet:~$ /etc/init.d/S50
- S50dropbear S50lighttpd
- outernet@outernet:~$ /etc/init.d/S50
- S50dropbear S50lighttpd
- outernet@outernet:~$ /etc/init.d/S50lighttpd restart
- Stopping lighttpd: start-stop-daemon: warning: killing process 1143: Operation not permitted
- OK
- Starting lighttpd: OK
- outernet@outernet:~$ dmesg
- [ 0.000000@0] Booting Linux on physical CPU 0x200
- [ 0.000000@0] Linux version 3.10.61 (hajime@alufox) (gcc version 4.9.1 (crosstool-NG 1.20.0) ) #11 SMP PREEMPT Sun Nov 15 14:51:37 CET 2015
- [ 0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000@0] Machine: Amlogic Meson6, model: AMLOGIC
- [ 0.000000@0] physical memory start address is 0x80000000
- [ 0.000000@0] reserved_end is 8e4fffff
- [ 0.000000@0] reserved 511M-512M 1M memory for firmware
- [ 0.000000@0] Total memory is 1024 MiB
- [ 0.000000@0] Reserved low memory from 0x85000000 to 0x8e4fffff, size: 149 MiB
- [ 0.000000@0] ion_dev0(low) : 0x85100000 - 0x87100000 ( 32 MiB)
- [ 0.000000@0] mesonfb0(low) : 0x87100000 - 0x88100000 ( 16 MiB)
- [ 0.000000@0] mesonfb1(low) : 0x88100000 - 0x88200000 ( 1 MiB)
- [ 0.000000@0] deinterlace0(low) : 0x88200000 - 0x89e00000 ( 28 MiB)
- [ 0.000000@0] mesonstream0(low) : 0x89e00000 - 0x8a800000 ( 10 MiB)
- [ 0.000000@0] vdec0(low) : 0x8a800000 - 0x8c800000 ( 32 MiB)
- [ 0.000000@0] ppmgr0(low) : 0x8c800000 - 0x8db00000 ( 19 MiB)
- [ 0.000000@0] amvideocap0(low) : 0x8db00000 - 0x8e500000 ( 10 MiB)
- [ 0.000000@0] Ignore bootargs 'mem' param.
- [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000@0] On node 0 totalpages: 223744
- [ 0.000000@0] free_area_init_node: node 0, pgdat c0835380, node_mem_map c08c0000
- [ 0.000000@0] Normal zone: 1504 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 154112 pages, LIFO batch:31
- [ 0.000000@0] HighMem zone: 544 pages used for memmap
- [ 0.000000@0] HighMem zone: 69632 pages, LIFO batch:15
- [ 0.000000@0] Meson chip version = RevA (16:A - 0:D67)
- [ 0.000000@0] PERCPU: Embedded 7 pages/cpu @c10ce000 s7808 r8192 d12672 u32768
- [ 0.000000@0] pcpu-alloc: s7808 r8192 d12672 u32768 alloc=8*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 222240
- [ 0.000000@0] Kernel command line: console=ttyS0,115200n8 logo=osd1,0x84100000,720p,full androidboot.resolution=720p hdmimode=720p cvbsmode=576cvbs hlt vmalloc=256m mem=1024m a9_clk_max=1512000000 vdachwswitch=cvbs hdmitx= mac=e8:18:63:50:6d:92 ubi.mtd=data
- [ 0.000000@0] osd1:1
- [ 0.000000@0] 720p:11
- [ 0.000000@0] full:2
- [ 0.000000@0] kernel get hdmimode form uboot is 720p
- [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
- [ 0.000000@0] ******** uboot setup mac-addr: e8:18:63:50:6d:92
- [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000@0] Memory: 80MB 282MB 512MB = 874MB total
- [ 0.000000@0] Memory: 875912k/875912k available, 19064k reserved, 278528K highmem
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000@0] vmalloc : 0xef800000 - 0xff000000 ( 248 MB)
- [ 0.000000@0] lowmem : 0xc0000000 - 0xef000000 ( 752 MB)
- [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000@0] .text : 0xc0008000 - 0xc07b38fc (7855 kB)
- [ 0.000000@0] .init : 0xc07b4000 - 0xc07dee80 ( 172 kB)
- [ 0.000000@0] .data : 0xc07e0000 - 0xc0836020 ( 345 kB)
- [ 0.000000@0] .bss : 0xc0836020 - 0xc08bfafc ( 551 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] NR_IRQS:256
- [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000000@0] Global timer: MESON TIMER-A (c07f9b40) initialized
- [ 0.000000@0] Disable timerA
- [ 0.000000@0] Console: colour dummy device 80x30
- [ 0.000000@0] meson_serial_console_setup
- [ 0.000000@0] console [ttyS0] enabled
- [ 0.324569@0] Calibrating delay loop... 2387.14 BogoMIPS (lpj=11935744)
- [ 0.380046@0] pid_max: default: 32768 minimum: 301
- [ 0.382214@0] Mount-cache hash table entries: 512
- [ 0.387603@0] CPU: Testing write buffer coherency: ok
- [ 0.392148@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
- [ 0.397585@0] Local timer: MESON TIMER-B (c07f9c40) for CPU0 initialized
- [ 0.404312@0] Disable timerA
- [ 0.407123@0] Disable timerB
- [ 0.409992@0] Disable timerA
- [ 0.412992@0] Setting up static identity map for 0xc05afb90 - 0xc05afbe8
- [ 0.419693@0] L310 cache controller enabled
- [ 0.423703@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c8, Cache size: 524288 B
- [ 0.431229@0] AUX_CTRL 0x3e460000, PERFETCH_CTRL 0x30000006, POWER_CTRL 0x00000000
- [ 0.439331@0] TAG_LATENCY 0x00000222, DATA_LATENCY 0x00000222
- [ 0.497971@1] CPU1: Booted secondary processor
- [ 0.557615@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
- [ 0.557628@1] Local timer: MESON TIMER-D (c07f9e40) for CPU1 initialized
- [ 0.557684@0] Brought up 2 CPUs
- [ 0.557690@0] SMP: Total of 2 processors activated (4780.85 BogoMIPS).
- [ 0.557693@0] CPU: All CPU(s) started in SVC mode.
- [ 0.558140@0] devtmpfs: initialized
- [ 0.562761@0] clkrate [ xtal ] : 24000000
- [ 0.562768@0] clkrate [ pll_sys ] : 1200000000
- [ 0.562773@0] clkrate [ pll_fixed ] : 2000000000
- [ 0.562777@0] clkrate [ pll_vid2 ] : 378000000
- [ 0.562780@0] clkrate [ pll_hpll ] : 378000000
- [ 0.562849@0] clkrate [ pll_ddr ] : 516000000
- [ 0.562853@0] clkrate [ a9_clk ] : 1200000000
- [ 0.562921@0] clkrate [ clk81 ] : 200000000
- [ 0.563954@0] pinctrl core: initialized pinctrl subsystem
- [ 0.564409@0] regulator-dummy: no parameters
- [ 0.564731@0] NET: Registered protocol family 16
- [ 0.582271@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.588755@0] amlogic_gpio gpio: Probed amlogic GPIO driver
- [ 0.589404@0] register lm device lm-root
- [ 0.589527@0] register lm device lm1
- [ 0.589632@0] register lm device lm0
- [ 0.589954@0] Init pinux probe!
- [ 0.590740@0] pinmux-m6 pinmux: Probed amlogic pinctrl driver
- [ 0.590924@0] -------early_init_dt_probe:38----------
- [ 0.591091@0] -------early_init_dt_init:115----------
- [ 0.591094@0] tv_init_module
- [ 0.591104@0] major number 254 for disp
- [ 0.591106@0] vout_register_server
- [ 0.591109@0] register tv module server ok
- [ 0.591214@0] aml_i2c version: 20140813
- [ 0.591272@0] plat->state_name:default
- [ 0.591287@0] master_no = 0, master_regs=f3100500
- [ 0.591481@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ee8e48a8)
- [ 0.591485@0] aml-i2c i2c-AO: aml i2c bus driver.
- [ 0.591592@0] plat->state_name:default
- [ 0.591600@0] master_no = 1, master_regs=f1108500
- [ 0.591759@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ee8e4ca8)
- [ 0.591763@0] aml-i2c i2c-A: aml i2c bus driver.
- [ 0.591866@0] plat->state_name:default
- [ 0.591874@0] master_no = 2, master_regs=f11087c0
- [ 0.592024@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ee8e50a8)
- [ 0.592028@0] aml-i2c i2c-B: aml i2c bus driver.
- [ 0.592272@0] call aml_dvfs_init in
- [ 0.592322@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
- [ 0.592328@0] [DVFS]dvfs table of vcck_dvfs is:
- [ 0.592332@0] [DVFS] freq, min_uV, max_uV
- [ 0.592335@0] [DVFS] 200000, 1010000, 1010000
- [ 0.592337@0] [DVFS] 600000, 1010000, 1010000
- [ 0.592339@0] [DVFS] 792000, 1010000, 1010000
- [ 0.592341@0] [DVFS] 816000, 1110000, 1110000
- [ 0.592343@0] [DVFS] 840000, 1110000, 1110000
- [ 0.592345@0] [DVFS] 984000, 1110000, 1110000
- [ 0.592347@0] [DVFS] 1000000, 1110000, 1110000
- [ 0.592349@0] [DVFS] 1080000, 1220000, 1220000
- [ 0.592351@0] [DVFS] 1200000, 1240000, 1240000
- [ 0.592353@0] [DVFS] 1320000, 1320000, 1320000
- [ 0.592355@0] [DVFS] 1512000, 1320000, 1320000
- [ 0.592565@0] hdmitx: system: amhdmitx_init
- [ 0.592567@0] hdmitx: system: Ver: 2014May6
- [ 0.592619@0] hdmitx: system: amhdmitx_probe
- [ 0.592953@0] hdmitx: system: not find cec config
- [ 0.592955@0] hdmitx: system: not find vend_init_data
- [ 0.592980@0] amhdmitx is using the pin GPIOD_5
- [ 0.593345@0] hdmitx: system: hw init
- [ 0.593355@0] HDMI: get brd phy data
- [ 0.593356@0] hdmi phy setting
- [ 0.593404@0] HDMI: get brd phy data
- [ 0.593405@0] hdmi phy setting
- [ 0.593943@0] hdmitx: system: reset intr mask
- [ 0.640450@0] bio: create slab <bio-0> at 0
- [ 0.641508@0] SCSI subsystem initialized
- [ 0.642033@0] usbcore: registered new interface driver usbfs
- [ 0.642137@0] usbcore: registered new interface driver hub
- [ 0.642270@0] usbcore: registered new device driver usb
- [ 0.643263@0] TV mode 576cvbs selected.
- [ 0.643268@0] [0x1b7e] = 0xff
- [ 0.643269@0] [0x105f] = 0x0
- [ 0.643271@0] [0x109c] = 0x2001042d
- [ 0.643273@0] [0x109d] = 0x814d3928
- [ 0.643275@0] [0x109e] = 0x6b425012
- [ 0.643276@0] [0x109f] = 0x110
- [ 0.643278@0] [0x109c] = 0x1042d
- [ 0.643280@0] [0x1066] = 0x11943
- [ 0.643281@0] [0x1059] = 0x100
- [ 0.643283@0] [0x105f] = 0x80000
- [ 0.643285@0] [0x105f] = 0x88001
- [ 0.643286@0] [0x105f] = 0x80003
- [ 0.643288@0] [0x104a] = 0x101
- [ 0.643289@0] [0x1b54] = 0x12
- [ 0.643291@0] [0x1c0a] = 0x12
- [ 0.643292@0] [0x1b62] = 0x0
- [ 0.643294@0] [0x1b00] = 0x0
- [ 0.643295@0] [0x1b01] = 0x0
- [ 0.643297@0] [0x1b0a] = 0x3
- [ 0.643298@0] [0x1b0b] = 0x81
- [ 0.643300@0] [0x1b0e] = 0x3
- [ 0.643301@0] [0x1b0f] = 0x104
- [ 0.643303@0] [0x1b50] = 0x8107
- [ 0.643305@0] [0x1b68] = 0xff
- [ 0.643306@0] [0x1b00] = 0x13
- [ 0.643307@0] [0x1b01] = 0x26
- [ 0.643309@0] [0x1b07] = 0x28
- [ 0.643310@0] [0x1b08] = 0x7
- [ 0.643312@0] [0x1b56] = 0x333
- [ 0.643313@0] [0x1c19] = 0xfb
- [ 0.643315@0] [0x1c1a] = 0x69b
- [ 0.643316@0] [0x1c1b] = 0x16
- [ 0.643318@0] [0x1c1c] = 0x136
- [ 0.643319@0] [0x1c1d] = 0x17
- [ 0.643321@0] [0x1c1e] = 0x137
- [ 0.643323@0] [0x1b60] = 0x0
- [ 0.643324@0] [0x1b48] = 0x0
- [ 0.643325@0] [0x1b6e] = 0x2
- [ 0.643327@0] [0x1c18] = 0x4e01
- [ 0.643328@0] [0x1b64] = 0x61
- [ 0.643330@0] [0x1b65] = 0x4061
- [ 0.643331@0] [0x1b66] = 0x5061
- [ 0.643333@0] [0x1b78] = 0x0
- [ 0.643334@0] [0x1b79] = 0x0
- [ 0.643336@0] [0x1b7a] = 0x0
- [ 0.643337@0] [0x1b7b] = 0x0
- [ 0.643339@0] [0x1b7c] = 0x0
- [ 0.643340@0] [0x1b7d] = 0x0
- [ 0.643342@0] [0x271a] = 0x5
- [ 0.643343@0] [0x1bfc] = 0x2000
- [ 0.643345@0] [0x1c0b] = 0x1111
- [ 0.643346@0] [0x1c0c] = 0x11
- [ 0.643348@0] [0x1b80] = 0x0
- [ 0.643349@0] [0x1b57] = 0x1
- [ 0.643351@0] [0x1bf2] = 0x1b
- [ 0.643352@0] [0x1b56] = 0x333
- [ 0.643353@0] [0x1b05] = 0x5
- [ 0.643355@0] [0x1c5a] = 0x1
- [ 0.643356@0] [0x1c5b] = 0xfc48
- [ 0.643358@0] [0x1b30] = 0x0
- [ 0.643360@0] tvoutc_setmode[452]
- [ 0.643364@0] mode is: 8
- [ 0.643366@0] config HPLL
- [ 0.643369@0] set_hpll_clk_out[230] clk = 1080
- [ 0.643371@0] config HPLL done
- [ 1.004840@1] Disable timerD
- [ 1.649647@0] call aml_pmu_probe_init in
- [ 1.649942@0] get property: use_pwm, value:0x00000001, dec: 1
- [ 1.655665@0] get property: table_count, value:0x00000010, dec: 16
- [ 1.663406@0] meson_cs_dvfs_probe, table count:16, use_pwm:1, pwm controller:2
- [ 1.670598@0] 0, 00130009, 1010000
- [ 1.674062@0] 1, 0012000a, 1050000
- [ 1.677534@0] 2, 0011000b, 1070000
- [ 1.681016@0] 3, 0010000c, 1090000
- [ 1.684478@0] 4, 000f000d, 1110000
- [ 1.687957@0] 5, 000e000e, 1130000
- [ 1.691422@0] 6, 000d000f, 1150000
- [ 1.694894@0] 7, 000c0010, 1170000
- [ 1.698371@0] 8, 000b0011, 1190000
- [ 1.701838@0] 9, 000a0012, 1210000
- [ 1.705310@0] 10, 00090013, 1220000
- [ 1.708801@0] 11, 00080014, 1240000
- [ 1.712254@0] 12, 00070015, 1270000
- [ 1.715726@0] 13, 00060016, 1280000
- [ 1.719207@0] 14, 00050017, 1300000
- [ 1.722670@0] 15, 00040018, 1320000
- [ 1.726194@0] get pin for pwm--------
- [ 1.729801@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
- [ 1.730172@0] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.736956@0] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.743317@0] Switching to clocksource Timer-E
- [ 1.757410@0] NET: Registered protocol family 2
- [ 1.757931@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.763585@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.770201@0] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.776688@0] TCP: reno registered
- [ 1.780014@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.786110@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.792799@0] NET: Registered protocol family 1
- [ 1.797781@0] RPC: Registered named UNIX socket transport module.
- [ 1.803169@0] RPC: Registered udp transport module.
- [ 1.808049@0] RPC: Registered tcp transport module.
- [ 1.812891@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.819582@0] wifi_dev_probe
- [ 1.822355@0] wifi_dt : interrupt_pin=GPIOX_11
- [ 1.826785@0] wifi_dt : irq_num=null
- [ 1.830374@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
- [ 1.835460@0] wifi_dt : power_on_pin=GPIOC_7
- [ 1.839729@0] interrupt_pin=52, irq_num=4, irq_trigger_type=0, power_on_pin=112,clock_32k_pin=53
- [ 1.848954@0] Unpacking initramfs...
- [ 1.895610@0] Freeing initrd memory: 948K (c4008000 - c40f5000)
- [ 1.897861@1] balance_pgdat end zone=0, pgdat_is_balanced=0
- [ 1.897954@0] bounce pool size: 64 pages
- [ 1.907314@0] Registering unionfs 2.6 (for 3.10.53)
- [ 1.908278@0] NFS: Registering the id_resolver key type
- [ 1.911799@0] Key type id_resolver registered
- [ 1.916105@0] Key type id_legacy registered
- [ 1.920317@0] NTFS driver 2.1.30 [Flags: R/W].
- [ 1.925038@0] msgmni has been set to 1168
- [ 1.929639@0] io scheduler noop registered
- [ 1.932771@0] io scheduler deadline registered (default)
- [ 1.943089@0] loop: module loaded
- [ 1.944279@0] tun: Universal TUN/TAP device driver, 1.6
- [ 1.946571@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.953227@0] usbcore: registered new interface driver asix
- [ 1.958605@0] usbcore: registered new interface driver ax88179_178a
- [ 1.964800@0] usbcore: registered new interface driver cdc_ether
- [ 1.970814@0] usbcore: registered new interface driver net1080
- [ 1.976596@0] usbcore: registered new interface driver cdc_subset
- [ 1.982719@0] usbcore: registered new interface driver zaurus
- [ 1.988457@0] usbcore: registered new interface driver cdc_ncm
- [ 1.994441@0] usbcore: registered new interface driver usb-storage
- [ 2.000316@0] i2c /dev entries driver
- [ 2.004559@0] wetekplay_led_init_module
- [ 2.008322@0] vout_init_module
- [ 2.010847@0] start init vout module
- [ 2.014622@0] create vout attribute ok
- [ 2.018673@0] ge2d_init
- [ 2.020963@0] ge2d_dev major:249
- [ 2.024516@0] ge2d start monitor
- [ 2.027624@0] osd_init
- [ 2.027631@1] ge2d workqueue monitor start
- [ 2.034133@0] osd_probe, vinfo:c05e5870
- [ 2.038031@0] Frame buffer memory assigned at phy:0x87100000, vir:0xfb000000, size=16384K
- [ 2.046051@0] osd_probe, mydef_var:c0816ff8, vinfo:c05e5870
- [ 2.051643@0] init fbdev bpp is :32
- [ 2.055158@0] ---------------clear framebuffer0 memory
- [ 2.083410@0] Frame buffer memory assigned at phy:0x88100000, vir:0xefe00000, size=1024K
- [ 2.085851@0] osd_probe, mydef_var:c0816ff8, vinfo:c05e5870
- [ 2.091417@0] ---------------clear framebuffer1 memory
- [ 2.123327@0] osd probe ok
- [ 2.126463@0] DI: di_init
- [ 2.126500@0] DI: di_probe
- [ 2.126959@0] aml_wdt_driver_init,301
- [ 2.126982@0] ** disable watchdog
- [ 2.128512@0] keys===========================================
- [ 2.134008@0] keys_devno=f600000
- [ 2.137481@0] securitykey: device aml_keys created
- [ 2.142002@0] amlkeys=0
- [ 2.144517@0] platform_driver_register--aml_keys_driver--------------------
- [ 2.151730@0] set uart_ao pinmux use pinctrl subsystem
- [ 2.156488@0] P_AO_RTI_PIN_MUX_REG:1861
- [ 2.160372@0] start uart_ao_ttyS0:(irq = 122)
- [ 2.164652@0] register uart_ao ok
- [ 2.168215@0] start uart_a_ttyS1:(irq = 58)
- [ 2.172112@0] register uart_a ok
- [ 2.175544@0] start uart_d_ttyS4:(irq = 126)
- [ 2.179611@0] register uart_d ok
- [ 2.182925@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 2.187447@0] dwc_otg lm-root: dwc_otg_driver_probe(ee962c00)
- [ 2.187457@0] dwc_otg_driver_probe NOT match
- [ 2.191661@0] dwc_otg lm1: dwc_otg_driver_probe(ee962e00)
- [ 2.191679@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: f1108420, ctrl: f32c0000
- [ 2.700089@0] USB (1) use clock source: XTAL input
- [ 2.701117@0] dwc_otg lm1: base=0xf32c0000
- [ 2.701124@0] dwc_otg lm1: dwc_otg_device=0xedd465c0
- [ 2.901118@0] Core Release: 2.94a
- [ 2.901142@0] Setting default values for core params
- [ 2.903748@0] curmode: 1, host_only: 1
- [ 2.907504@0] dwc_otg lm1: DMA config: BURST_DEFAULT
- [ 3.307554@0] Using Buffer DMA mode
- [ 3.307577@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 3.309914@0] Working on port type = HOST
- [ 3.313980@0] dwc_otg lm1: DWC OTG Controller
- [ 3.318294@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 3.324956@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 3.329903@0] -------hcd->flags.d32 = 0
- [ 3.333715@0] Init: Port Power? op_state=1
- [ 3.337796@0] Init1: Power Port (0)
- [ 3.341369@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.348226@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.355571@0] usb usb1: Product: DWC OTG Controller
- [ 3.360453@0] usb usb1: Manufacturer: Linux 3.10.61 dwc_otg_hcd
- [ 3.366337@0] usb usb1: SerialNumber: lm1
- [ 3.370870@0] hub 1-0:1.0: USB hub found
- [ 3.374243@0] hub 1-0:1.0: 1 port detected
- [ 3.378542@0] dwc_otg lm0: dwc_otg_driver_probe(ee963000)
- [ 3.378583@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: f1108400, ctrl: f3240000
- [ 3.386921@0] dwc_otg lm0: base=0xf3240000
- [ 3.386929@0] dwc_otg lm0: dwc_otg_device=0xedd21f40
- [ 3.577048@0] Indeed it is in host mode hprt0 = 00021501
- [ 3.596996@1] Core Release: 2.94a
- [ 3.597041@1] Setting default values for core params
- [ 3.599625@1] curmode: 1, host_only: 0
- [ 3.757028@0] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.758237@0] Indeed it is in host mode hprt0 = 00001101
- [ 3.958163@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 3.959397@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.966690@0] usb 1-1: Product: USB2.0 Hub
- [ 3.971466@0] hub 1-1:1.0: USB hub found
- [ 3.974937@0] hub 1-1:1.0: 4 ports detected
- [ 4.002893@1] dwc_otg lm0: DMA config: BURST_DEFAULT
- [ 4.402490@1] Using Buffer DMA mode
- [ 4.402514@1] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 4.404852@1] Working on port type = OTG
- [ 4.408766@1] Current port type: SLAVE
- [ 4.412557@1] dwc_otg lm0: DWC OTG Controller
- [ 4.416847@1] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 4.423550@1] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 4.428511@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.435407@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.442793@1] usb usb2: Product: DWC OTG Controller
- [ 4.447651@1] usb usb2: Manufacturer: Linux 3.10.61 dwc_otg_hcd
- [ 4.453547@1] usb usb2: SerialNumber: lm0
- [ 4.458061@1] hub 2-0:1.0: USB hub found
- [ 4.461454@1] hub 2-0:1.0: 1 port detected
- [ 4.465659@1] Dedicated Tx FIFOs mode
- [ 4.469355@1] using timer detect id change, eea15800
- [ 4.474242@1] Amlogic nand flash Kernel driver, Version K1.06.015 (c) 2010 Amlogic Inc.
- [ 4.482131@1] ####Version of Uboot must be newer than U1.06.011!!!!!
- [ 4.488652@1] ===========================================m3_nand_probe:1230,nand device tree ok,dev-name:nand1
- [ 4.498529@1] m3_get_nand_platform:1682,find enable pad finished
- [ 4.504498@1] m3_get_nand_platform:1695,find busy_pad finished
- [ 4.510327@1] m3_get_nand_platform:1707,find timming_mode finished
- [ 4.516478@1] m3_get_nand_platform:1719,find bch_mode finished
- [ 4.522300@1] m3_get_nand_platform:1731,find plane_modefinished
- [ 4.528216@1] m3_get_nand_platform:1787,parse dts
- [ 4.532881@1] chip->controller=c08958c4
- [ 4.536703@1] ###plat->platform_nand_data.chip.nr_chips =2
- [ 4.542196@1] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns
- [ 4.550493@1] No NAND device found
- [ 4.553829@1] NAND device id: 2c 44 44 4b a9 0
- [ 4.558285@1] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron D revision NAND 4GiB MT29F32G08CBADA)
- [ 4.573807@1] 1 NAND chips detected
- [ 4.573875@1] aml_nand_init auto detect RB pin here and por_cfg:3dd
- [ 4.577922@1] aml_nand_init detect without RB pin here
- [ 4.582140@0] HOST mode
- [ 4.585447@1] #####aml_nand_init, none RB and chip->chip_delay:100
- [ 4.591622@1] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns
- [ 4.598997@1] oob size is not enough for selected bch mode: NAND_BCH60_1K_MODE force bch to mode: NAND_BCH40_1K_MODE
- [ 4.607016@0] -------hcd->flags.d32 = 0
- [ 4.607052@0] Init: Port Power? op_state=1
- [ 4.607054@0] Init1: Power Port (0)
- [ 4.607058@0] set usb port power on (board gpio 104)!
- [ 4.625907@1] aml_chip->oob_fill_cnt =168,aml_chip->oob_size =744,bch_bytes =70
- [ 4.633194@1] multi plane error for selected plane mode: NAND_TWO_PLANE_MODE force plane to : NAND_SINGLE_PLANE_MODE
- [ 4.643699@1] oob layout use nand base oob layout oobsize = 32,oobmul =1,mtd->oobsize =744,aml_chip->oob_size =744
- [ 4.669172@1] aml nand env valid addr: 28000
- [ 4.669199@1] CONFIG_ENV_SIZE=0x8000; ENV_SIZE=0x7ffc; bbt=0x1330; default_environment_size=0x0
- [ 4.684590@1] nand env: nand_env_probe.
- [ 4.684969@1] nand key: nand_key_probe.
- [ 4.686786@1] key start_blk=2040,end_blk=2047,aml_nand_key_init:595
- [ 4.701597@1] aml nand key valid addr: ff010000
- [ 4.701623@1] aml nand key valid addr: ff210000
- [ 4.705169@1] aml nand key valid addr: ff410000
- [ 4.709782@1] aml nand key valid addr: ff610000
- [ 4.714372@1] CONFIG_KEYSIZE=0x10000; KEYSIZE=0xfffc; bbt=0x1330; default_keyironment_size=0xeccc
- [ 4.714407@1] i=0,register --- nand_key
- [ 4.721575@1] Creating 4 MTD partitions on "D revision NAND 4GiB MT29F32G08CBADA":
- [ 4.725748@1] 0x000000800000-0x000001000000 : "boot"
- [ 4.731655@1] 0x000001000000-0x000001800000 : "recovery"
- [ 4.736772@1] 0x000001800000-0x000002000000 : "logo"
- [ 4.741706@1] 0x000002000000-0x0000ff000000 : "data"
- [ 4.745886@1] NAND bbt detect factory Bad block at b400000
- [ 4.751551@1] NAND bbt detect factory Bad block at b600000
- [ 4.757193@1] NAND bbt detect Bad block at 21400000
- [ 4.763065@1] H▒▒▒E▒▒@P▒▒▒▒▒▒P▒▒▒▒▒▒豀▒@Q▒▒init_aml_nftl start
- [ 4.768712@1] mtd->name: data
- [ 4.771664@1] nftl version 131206a
- [ 4.775186@1] nftl part attr 0
- [ 4.778121@1] NAND bbt detect factory Bad block at b400000
- [ 4.783724@1] NAND bbt detect factory Bad block at b600000
- [ 4.789395@1] NAND bbt detect Bad block at 21400000
- [ 4.794565@1] size_in_blk 2024; total_block 2022;
- [ 4.799329@1] nftl start:2022,252
- [ 4.806302@1] first
- [ 4.832235@1] NAND bbt detect factory Bad block at b400000
- [ 4.832268@1] NAND bbt detect factory Bad block at b600000
- [ 4.895034@1] NAND bbt detect Bad block at 21400000
- [ 5.479821@1] second 0,1770
- [ 5.479842@1] all block full!!
- [ 5.480090@1] free block cnt = 2021
- [ 5.483478@1] nftl ok!
- [ 5.486112@1] aml_nftl_blk->mbd.tr.name =data
- [ 5.490984@1] data: unknown partition table
- [ 5.494687@1] aml_nftl_add_mtd ok
- [ 5.497743@1] init_aml_nftl end
- [ 5.500981@1] ethernet_driver probe!
- [ 5.504402@1] Please config phy interface.
- [ 5.508581@1] Please config savepowermode.
- [ 5.512643@1] Please config reset_pin_enable.
- [ 5.516983@1] Please config reset_delay.
- [ 5.520899@1] Please config reset_pin.
- [ 5.524621@1] Please config new_maclogic.
- [ 5.528626@1] ethernetinit(dbg[c0822d5c]=1)
- [ 5.532807@1] ethernet base addr is f3610000
- [ 5.537064@1] write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 5.545439@1] libphy: AMLMAC MII Bus: probed
- [ 5.547560@1] eth0: PHY ID 0007c0f1 at 1 IRQ -1 (0:01) active
- [ 5.555103@1] Amlogic A/V streaming port init
- [ 5.559721@1] init vdec memsource -1971322880->-1937768449
- [ 5.563278@1] [tsync_pcr_init]init success.
- [ 5.567369@1] amvideocap_init_module
- [ 5.570960@1] amvideocap_probe,amvideocap
- [ 5.574882@1] amvideocap_dev_register buf:8db00000,size:a00000.
- [ 5.581297@1] regist mpeg12 codec profile
- [ 5.584874@1] regist mpeg4 codec profile
- [ 5.588695@1] amvdec_vc1 module init
- [ 5.592344@1] regist vc1 codec profile
- [ 5.595971@1] amvdec_h264 module init
- [ 5.600077@1] regist h264 codec profile
- [ 5.603436@1] amvdec_h264mvc module init
- [ 5.607475@1] regist hmvc codec profile
- [ 5.611262@1] regist mjpeg codec profile
- [ 5.615067@1] amvdec_real module init
- [ 5.618846@1] regist real codec profile
- [ 5.622842@1] alloc_keep_buffer keep_y_addr ed400000
- [ 5.627523@1] alloc_keep_buffer keep_u_addr eda00000
- [ 5.632436@1] alloc_keep_buffer keep_v_addr ed980000
- [ 5.637388@1] yaddr=ed400000,u_addr=eda00000,v_addr=ed980000
- [ 5.643428@1] create_ge2d_work_queue video task ok
- [ 5.648416@1] efuse===========================================
- [ 5.653951@1] efuse: device efuse created
- [ 5.657828@1] efuse--------------------------------------------
- [ 5.663589@1] SARADC Driver init.
- [ 5.667102@1] __saradc_probe__
- [ 5.817125@1] saradc calibration: ref_val = 513
- [ 5.817150@1] saradc calibration: ref_nominal = 512
- [ 5.820870@1] saradc calibration: coef = 4161
- [ 5.825331@1] ADC Keypad Driver init.
- [ 5.828941@1] ==kp_probe==
- [ 5.831567@1] chan #4 used for ADC key
- [ 5.835280@1] menu key(139) registed.
- [ 5.838949@1] vol- key(114) registed.
- [ 5.842571@1] vol+ key(115) registed.
- [ 5.846216@1] back key(158) registed.
- [ 5.849877@1] home key(102) registed.
- [ 5.853508@1] ok key(232) registed.
- [ 5.857182@1] input: adc_keypad as /devices/platform/adc_keypad.3/input/input0
- [ 5.864394@1] adc keypad register input device completed.
- [ 5.869677@1] adc keypad major:241
- [ 5.873452@1] Meson KeyInput init
- [ 5.876508@1] Key 116 registed.
- [ 5.879766@1] input: key_input as /devices/platform/key_input.4/input/input1
- [ 5.886743@1] Meson KeyInput register RTC interrupt
- [ 5.891306@1] Meson KeyInput major=240
- [ 5.895512@1] spi_nor_init
- [ 5.898062@1] amlogic_spi_nor_probe:
- [ 5.901426@1] amlogic_spi->state_name:default
- [ 5.905946@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
- [ 5.913481@1] check_storage_device : spi boot_device_flag : 0
- [ 5.919052@1] spi_nor_probe
- [ 5.921859@1] spi_nor apollospi:32766: mx25l3205d (4096 Kbytes)
- [ 5.928044@1] Creating 2 MTD partitions on "apollospi:32766":
- [ 5.933455@1] 0x000000000000-0x000000100000 : "bootloader"
- [ 5.939786@1] 0x000000100000-0x000000108000 : "ubootenv"
- [ 5.944983@1] amlogic_spi_nor_probe over
- [ 5.948347@1] mmc driver version: 1.07, 2014-09-23: eMMC fix the SDIO data1 interrupt caused timeout error problem
- [ 5.959486@1] host->base f1108c20
- [ 5.961778@1] pdata->caps 7
- [ 5.964526@1] pdata->caps2 0
- [ 5.967423@1] get property: port, value:0x00000001
- [ 5.973900@1] get property: ocr_avail, value:0x00200000
- [ 5.980558@1] get property: f_min, value:0x000493e0
- [ 5.986920@1] get property: f_max, value:0x02faf080
- [ 5.993441@1] get property: f_max_w, value:0x02faf080
- [ 5.999957@1] get property: max_req_size, value:0x00020000
- [ 6.006450@1] get property: irq_in, value:0x00000005
- [ 6.012986@1] get property: irq_out, value:0x00000006
- [ 6.019488@1] get property: power_level, value:0x00000000
- [ 6.025985@1] get property: gpio_cd, str:CARD_6
- [ 6.032104@1] get property: gpio_power, str:CARD_8
- [ 6.037968@1] get property: pinname, str:sd
- [ 6.043601@1] get property: card_type, value:0x00000005
- [ 6.050121@1] get property: gpio_dat3, str:CARD_3
- [ 6.056122@1] normal card in
- [ 6.097082@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 6.097213@1] pdata->caps 107
- [ 6.097216@1] pdata->caps2 0
- [ 6.097220@1] get property: port, value:0x00000000
- [ 6.097223@1] get property: ocr_avail, value:0x00200000
- [ 6.097226@1] get property: f_min, value:0x000493e0
- [ 6.097228@1] get property: f_max, value:0x02faf080
- [ 6.097231@1] get property: f_max_w, value:0x02faf080
- [ 6.097234@1] get property: max_req_size, value:0x00020000
- [ 6.097240@1] get property: pinname, str:sdio
- [ 6.097244@1] get property: card_type, value:0x00000003
- [ 6.201835@0] sd: SD Status: Invalid Allocation Unit size.
- [ 6.205239@0] sd: new high speed SDXC card at address 0001, clock 50000000, 4-bit-bus-width
- [ 6.210431@0] mmcblk0: sd:0001 00000 58.5 GiB
- [ 6.237650@0] mmcblk0: p1
- [ 6.307033@0] [aml_sdio_probe] aml_sdio_probe() success!
- [ 6.307305@0] [dsp]DSP start addr 0xc5000000
- [ 6.310995@0] [dsp]register dsp to char divece(257)
- [ 6.316251@0] name=nand_key nand_key
- [ 6.319468@0] read:addr:0xff010000,phy_blk_addr:2040,phy_page_addr:8,aml_nand_get_key:129
- [ 6.331058@0] register_aes_algorithm:482,old way
- [ 6.332162@0] unkown current key-name,key_read_show:1396
- [ 6.337476@0] get keyexample fail, aml_rtc_probe:750
- [ 6.343276@0] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
- [ 6.350408@0] wetek-dvb dvb.8: Found Wetek i2c-1 adapter ...
- [ 6.354100@0] wetek-dvb dvb.8: Found Wetek i2c-2 adapter ...
- [ 6.359795@0] wetek-dvb dvb.8: ts0: parallel
- [ 6.364101@0] wetek-dvb dvb.8: ts2: parallel
- [ 7.187024@0] wetek-dvb dvb.8: Wetek NIM(s) detection in progress ...
- [ 7.187830@0] wetek-dvb dvb.8: Checking for Sony CXD2837 DVB-C/T/T2 demod ...
- [ 7.195021@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6c
- [ 7.203962@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6c
- [ 7.212893@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6c
- [ 7.221792@0] i2c i2c-1: i2c wr failed=-11 reg=00
- [ 7.226589@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6e
- [ 7.235545@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6e
- [ 7.244496@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x6e
- [ 7.253385@0] i2c i2c-1: i2c wr failed=-11 reg=00
- [ 7.258162@0] wetek-dvb dvb.8: Checking for Panasonic MN88436 ATSC demod ...
- [ 7.265222@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x18
- [ 7.274171@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x18
- [ 7.283114@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0x18
- [ 7.292017@0] i2c i2c-1: i2c wr failed=-11 reg=10
- [ 7.296767@0] wetek-dvb dvb.8: Checking for AVL6211 DVB-S/S2 demod ...
- [ 7.303610@0] i2c i2c-1: AVL6211+AV2011 DVB-S/S2 successfully attached
- [ 7.309806@0] wetek-dvb dvb.8: Checking for AVL6211 DVB-S/S2 demod ...
- [ 7.316606@0] i2c i2c-2: AVL6211+AV2011 DVB-S/S2 successfully attached
- [ 7.322826@0] wetek-dvb dvb.8: Total Wetek NIM(s) found: 2
- [ 7.329158@0] UMP: UMP device driver loaded
- [ 7.332525@0] aml_hw_crypto initialization.
- [ 7.337526@0] usbcore: registered new interface driver snd-usb-audio
- [ 7.343597@0] dummy_codec_platform_probe
- [ 7.347172@0] enter aml_dai_probe
- [ 7.347621@0] enter dummy_codec_audio_probe
- [ 7.351281@0] soc-audio soc-audio: ASoC: machine AML-DUMMY-CODEC should use snd_soc_register_card()
- [ 7.360494@0] rtd edd4a010
- [ 7.362906@0] cpu_dai ee9b1100
- [ 7.366040@0] codec_dai ee9b1400
- [ 7.369368@0] enter aml_platform_pcm_new (codec_dai: dummy_codec 1 cpu_dai: aml-dai0 0)
- [ 7.369935@0] aml-pcm 0:playback preallocate_dma_buffer: area=efc52000, addr=ad940000, size=131072
- [ 7.379501@0] iec958 0: preallocate dma buffer start=efce9000, size=80000
- [ 7.385806@0] aml-pcm 1:capture preallocate_dma_buffer: area=efd6a000, addr=adc00000, size=65536
- [ 7.393903@0] soc-audio soc-audio: dummy_codec <-> aml-dai0 mapping ok
- [ 7.401430@0] =dummy_codec_device_init==,dummy_codec_audio init done
- [ 7.406996@0] nf_conntrack version 0.5.0 (13700 buckets, 54800 max)
- [ 7.413741@0] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.418576@0] TCP: cubic registered
- [ 7.421934@0] NET: Registered protocol family 17
- [ 7.426567@0] NET: Registered protocol family 15
- [ 7.431299@0] Key type dns_resolver registered
- [ 7.435863@0] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 7.443393@0] Registering SWP/SWPB emulation handler
- [ 7.448348@0] enter meson_pm_init
- [ 7.451813@0] enter meson_pm_probe!
- [ 7.455090@0] meson_pm_probe done !
- [ 7.459804@0] regulator-dummy: disabling
- [ 7.462996@0] UBI: attaching mtd3 to ubi0
- [ 7.528314@0] NAND bbt detect factory Bad block at b400000
- [ 7.528348@0] NAND bbt detect factory Bad block at b600000
- [ 7.673701@0] NAND bbt detect Bad block at 21400000
- [ 9.104824@0] UBI: scanning is finished
- [ 9.110608@0] UBI: attached mtd3 (name "data", size 4048 MiB) to ubi0
- [ 9.111414@0] UBI: PEB size: 2097152 bytes (2048 KiB), LEB size: 2080768 bytes
- [ 9.118672@0] UBI: min./max. I/O unit sizes: 8192/8192, sub-page size 8192
- [ 9.125488@0] UBI: VID header offset: 8192 (aligned 8192), data offset: 16384
- [ 9.132616@0] UBI: good PEBs: 2021, bad PEBs: 3, corrupted PEBs: 0
- [ 9.138778@0] UBI: user volume: 4, internal volumes: 1, max. volumes count: 128
- [ 9.146052@0] UBI: max/mean erase counter: 351/41, WL threshold: 4096, image sequence number: 178184819
- [ 9.155445@0] UBI: available PEBs: 106, total reserved PEBs: 1915, PEBs reserved for bad PEB handling: 37
- [ 9.165010@1] UBI: background thread "ubi_bgt0d" started, PID 973
- [ 9.171061@0] aml_rtc rtc.0: setting system clock to 2015-01-29 14:35:39 UTC (1422542139)
- [ 9.179351@0] meson_cpufreq: no voltage_control prop
- [ 9.184160@0] voltage_control = 0
- [ 9.187641@0] ------------[ cut here ]------------
- [ 9.192237@0] WARNING: at kernel/smp.c:382 smp_call_function_many+0x2bc/0x2c8()
- [ 9.199510@0] Modules linked in:
- [ 9.202726@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.61 #11
- [ 9.209001@0] [<c0014b54>] (unwind_backtrace+0x0/0xec) from [<c0011c08>] (show_stack+0x10/0x14)
- [ 9.217667@0] [<c0011c08>] (show_stack+0x10/0x14) from [<c002af00>] (warn_slowpath_common+0x54/0x6c)
- [ 9.226772@0] [<c002af00>] (warn_slowpath_common+0x54/0x6c) from [<c002afb4>] (warn_slowpath_null+0x1c/0x24)
- [ 9.236579@0] [<c002afb4>] (warn_slowpath_null+0x1c/0x24) from [<c006fd4c>] (smp_call_function_many+0x2bc/0x2c8)
- [ 9.246736@0] [<c006fd4c>] (smp_call_function_many+0x2bc/0x2c8) from [<c006fd90>] (smp_call_function+0x38/0x6c)
- [ 9.256803@0] [<c006fd90>] (smp_call_function+0x38/0x6c) from [<c001b6d8>] (clk_set_rate_a9+0xac/0xec)
- [ 9.266091@0] [<c001b6d8>] (clk_set_rate_a9+0xac/0xec) from [<c001bc04>] (meson_clk_set_rate+0x134/0x184)
- [ 9.275637@0] [<c001bc04>] (meson_clk_set_rate+0x134/0x184) from [<c001bcf4>] (clk_set_rate+0xa0/0xc4)
- [ 9.284934@0] [<c001bcf4>] (clk_set_rate+0xa0/0xc4) from [<c0387ebc>] (meson_cpufreq_target_locked.isra.1+0x130/0x1e0)
- [ 9.295606@0] [<c0387ebc>] (meson_cpufreq_target_locked.isra.1+0x130/0x1e0) from [<c0387f90>] (meson_cpufreq_target+0x24/0x3c)
- [ 9.306977@0] [<c0387f90>] (meson_cpufreq_target+0x24/0x3c) from [<c031599c>] (dbs_check_cpu+0x1f8/0x28c)
- [ 9.316522@0] [<c031599c>] (dbs_check_cpu+0x1f8/0x28c) from [<c0316098>] (cpufreq_governor_dbs+0x588/0x960)
- [ 9.326250@0] [<c0316098>] (cpufreq_governor_dbs+0x588/0x960) from [<c03121b8>] (__cpufreq_governor+0x78/0x1f0)
- [ 9.336313@0] [<c03121b8>] (__cpufreq_governor+0x78/0x1f0) from [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c)
- [ 9.346381@0] [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c) from [<c0312798>] (cpufreq_add_dev_interface+0x24c/0x2a0)
- [ 9.357144@0] [<c0312798>] (cpufreq_add_dev_interface+0x24c/0x2a0) from [<c0312b70>] (cpufreq_add_dev+0x384/0x4f4)
- [ 9.367481@0] [<c0312b70>] (cpufreq_add_dev+0x384/0x4f4) from [<c0282700>] (subsys_interface_register+0x94/0xd8)
- [ 9.377632@0] [<c0282700>] (subsys_interface_register+0x94/0xd8) from [<c0311778>] (cpufreq_register_driver+0x88/0x190)
- [ 9.388394@0] [<c0311778>] (cpufreq_register_driver+0x88/0x190) from [<c0283dd8>] (driver_probe_device+0x7c/0x22c)
- [ 9.398722@0] [<c0283dd8>] (driver_probe_device+0x7c/0x22c) from [<c0284058>] (__driver_attach+0x8c/0x90)
- [ 9.408270@0] [<c0284058>] (__driver_attach+0x8c/0x90) from [<c02822e8>] (bus_for_each_dev+0x68/0x9c)
- [ 9.417470@0] [<c02822e8>] (bus_for_each_dev+0x68/0x9c) from [<c02835f8>] (bus_add_driver+0x1c0/0x24c)
- [ 9.426758@0] [<c02835f8>] (bus_add_driver+0x1c0/0x24c) from [<c0284644>] (driver_register+0x78/0x140)
- [ 9.436046@0] [<c0284644>] (driver_register+0x78/0x140) from [<c0285674>] (platform_driver_probe+0x18/0xa0)
- [ 9.445767@0] [<c0285674>] (platform_driver_probe+0x18/0xa0) from [<c00085c4>] (do_one_initcall+0x100/0x160)
- [ 9.455580@0] [<c00085c4>] (do_one_initcall+0x100/0x160) from [<c07b4bc8>] (kernel_init_freeable+0x138/0x1d8)
- [ 9.465478@0] [<c07b4bc8>] (kernel_init_freeable+0x138/0x1d8) from [<c05a4674>] (kernel_init+0xc/0x160)
- [ 9.474848@0] [<c05a4674>] (kernel_init+0xc/0x160) from [<c000e058>] (ret_from_fork+0x14/0x3c)
- [ 9.483435@0] ---[ end trace f7cf6a6749a1f3ed ]---
- [ 9.488208@0] ------------[ cut here ]------------
- [ 9.492985@0] WARNING: at kernel/smp.c:244 smp_call_function_single+0x164/0x1d8()
- [ 9.500444@0] Modules linked in:
- [ 9.503659@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.61 #11
- [ 9.510869@0] [<c0014b54>] (unwind_backtrace+0x0/0xec) from [<c0011c08>] (show_stack+0x10/0x14)
- [ 9.519549@0] [<c0011c08>] (show_stack+0x10/0x14) from [<c002af00>] (warn_slowpath_common+0x54/0x6c)
- [ 9.528662@0] [<c002af00>] (warn_slowpath_common+0x54/0x6c) from [<c002afb4>] (warn_slowpath_null+0x1c/0x24)
- [ 9.538470@0] [<c002afb4>] (warn_slowpath_null+0x1c/0x24) from [<c006f8e8>] (smp_call_function_single+0x164/0x1d8)
- [ 9.548798@0] [<c006f8e8>] (smp_call_function_single+0x164/0x1d8) from [<c006fd90>] (smp_call_function+0x38/0x6c)
- [ 9.559040@0] [<c006fd90>] (smp_call_function+0x38/0x6c) from [<c001b6d8>] (clk_set_rate_a9+0xac/0xec)
- [ 9.568327@0] [<c001b6d8>] (clk_set_rate_a9+0xac/0xec) from [<c001bc04>] (meson_clk_set_rate+0x134/0x184)
- [ 9.577875@0] [<c001bc04>] (meson_clk_set_rate+0x134/0x184) from [<c001bcf4>] (clk_set_rate+0xa0/0xc4)
- [ 9.587165@0] [<c001bcf4>] (clk_set_rate+0xa0/0xc4) from [<c0387ebc>] (meson_cpufreq_target_locked.isra.1+0x130/0x1e0)
- [ 9.597841@0] [<c0387ebc>] (meson_cpufreq_target_locked.isra.1+0x130/0x1e0) from [<c0387f90>] (meson_cpufreq_target+0x24/0x3c)
- [ 9.609211@0] [<c0387f90>] (meson_cpufreq_target+0x24/0x3c) from [<c031599c>] (dbs_check_cpu+0x1f8/0x28c)
- [ 9.618758@0] [<c031599c>] (dbs_check_cpu+0x1f8/0x28c) from [<c0316098>] (cpufreq_governor_dbs+0x588/0x960)
- [ 9.628482@0] [<c0316098>] (cpufreq_governor_dbs+0x588/0x960) from [<c03121b8>] (__cpufreq_governor+0x78/0x1f0)
- [ 9.638549@0] [<c03121b8>] (__cpufreq_governor+0x78/0x1f0) from [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c)
- [ 9.648618@0] [<c0312514>] (__cpufreq_set_policy+0x1e4/0x21c) from [<c0312798>] (cpufreq_add_dev_interface+0x24c/0x2a0)
- [ 9.659381@0] [<c0312798>] (cpufreq_add_dev_interface+0x24c/0x2a0) from [<c0312b70>] (cpufreq_add_dev+0x384/0x4f4)
- [ 9.669711@0] [<c0312b70>] (cpufreq_add_dev+0x384/0x4f4) from [<c0282700>] (subsys_interface_register+0x94/0xd8)
- [ 9.679866@0] [<c0282700>] (subsys_interface_register+0x94/0xd8) from [<c0311778>] (cpufreq_register_driver+0x88/0x190)
- [ 9.690631@0] [<c0311778>] (cpufreq_register_driver+0x88/0x190) from [<c0283dd8>] (driver_probe_device+0x7c/0x22c)
- [ 9.700959@0] [<c0283dd8>] (driver_probe_device+0x7c/0x22c) from [<c0284058>] (__driver_attach+0x8c/0x90)
- [ 9.710506@0] [<c0284058>] (__driver_attach+0x8c/0x90) from [<c02822e8>] (bus_for_each_dev+0x68/0x9c)
- [ 9.719707@0] [<c02822e8>] (bus_for_each_dev+0x68/0x9c) from [<c02835f8>] (bus_add_driver+0x1c0/0x24c)
- [ 9.728995@0] [<c02835f8>] (bus_add_driver+0x1c0/0x24c) from [<c0284644>] (driver_register+0x78/0x140)
- [ 9.738283@0] [<c0284644>] (driver_register+0x78/0x140) from [<c0285674>] (platform_driver_probe+0x18/0xa0)
- [ 9.748004@0] [<c0285674>] (platform_driver_probe+0x18/0xa0) from [<c00085c4>] (do_one_initcall+0x100/0x160)
- [ 9.757813@0] [<c00085c4>] (do_one_initcall+0x100/0x160) from [<c07b4bc8>] (kernel_init_freeable+0x138/0x1d8)
- [ 9.767710@0] [<c07b4bc8>] (kernel_init_freeable+0x138/0x1d8) from [<c05a4674>] (kernel_init+0xc/0x160)
- [ 9.777083@0] [<c05a4674>] (kernel_init+0xc/0x160) from [<c000e058>] (ret_from_fork+0x14/0x3c)
- [ 9.785670@0] ---[ end trace f7cf6a6749a1f3ee ]---
- [ 9.791018@0] hdmitx: cec: CEC init
- [ 9.794188@0] hdmitx: cec: CEC task process
- [ 9.798141@0] input: cec_input as /devices/virtual/input/input2
- [ 9.804195@0] hdmitx: cec: hdmitx_device->cec_init_ready:0x1dhd_module_init: Enter
- [ 9.811540@0] wifi_setup_dt
- [ 9.814319@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi
- [ 9.819903@0] clock_32k_pin(53) : (null)
- [ 9.823802@0] clock_32k_pin(53) : sdio_wifi
- [ 9.828270@0] interrupt_pin(52) : (null)
- [ 9.831855@0] wifi_dt : gpio op failed(-1) at line 250
- [ 9.836976@0] interrupt_pin(52) : sdio_wifi
- [ 9.841159@0] power_on_pin(112) : (null)
- [ 9.845056@0] power_on_pin(112) : sdio_wifi
- [ 9.849231@0] bt_setup
- [ 9.997096@0] WIFI Disable! 112
- [ 10.261814@0] WIFI Enable! 112
- [ 10.556091@0] sdio: mmc_rescan_try_freq: trying to init card at 400000 Hz
- [ 11.557355@0] [aml_sdio_timeout] time_start_cnt:1000
- [ 11.557355@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x3f003f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
- [ 11.557355@0] [aml_sdio_timeout] time_start_cnt:994
- [ 11.557355@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
- [ 11.557355@0] [aml_sdio_timeout] time_start_cnt:990
- [ 11.557355@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
- [ 13.597717@0] <4>[ 13.639666@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 13.642685@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 13.648541@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 13.655914@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 13.711730@0] sdio: new high speed SDIO card at address 0001, clock 50000000, 4-bit-bus-width
- [ 13.720164@0] [sdio_reinit] finish
- [ 13.720668@0] =========== WLAN placed in POWER ON ========
- [ 13.728446@0] bcmsdh_register: Linux Kernel SDIO/MMC Driver
- [ 13.730810@0] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
- [ 13.745172@0] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
- [ 13.778689@0] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
- [ 13.789490@0] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
- [ 13.798962@0] dhdsdio_probe: Disable prop_txstatus
- [ 13.804207@0] wl_create_event_handler(): thread:wl_event_handler:3d9 started
- [ 13.804292@1] tsk Enter, tsk = 0xefdc44cc
- [ 13.810280@0] init wlan_priv_wake
- [ 13.813560@0] dhd_attach(): thread:dhd_watchdog_thread:3da started
- [ 13.827664@1] dhd_attach(): thread:dhd_dpc:3db started
- [ 13.828436@1] dhd_attach(): thread:dhd_sysioc:3dc started
- [ 13.833575@0] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 13.841144@0] =========== WLAN placed in RESET ========
- [ 13.846239@0] init wifi power_wake lock
- [ 13.850185@0]
- [ 13.850185@0] Dongle Host Driver, version 1.88.45.4 (r420671)
- [ 13.850185@0] Compiled in drivers/net/wireless/bcmdhd on Nov 15 2015 at 14:50:14
- [ 13.864836@0] dhd_module_init: Exit error=0
- [ 13.869085@0] ALSA device list:
- [ 13.872092@0] #0: AML-DUMMY-CODEC
- [ 13.875789@0] config uart_ao_ttyS0:: Character length 8bits/char
- [ 13.887032@0] Changing uart_ao_ttyS0: baud from 0 to 115200
- [ 13.907170@0] Freeing unused kernel memory: 168K (c07b4000 - c07de000)
- [ 14.597028@0] Connect Timeout
- [ 14.597078@0] Device Not Connected/Responding
- [ 16.082984@1] UBIFS: static UBI volume - read-only mode
- [ 16.421692@1] UBIFS: mounted UBI device 0, volume 1, name "rootfs", R/O mode
- [ 16.423105@1] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit sizes: 8192 bytes/8192 bytes
- [ 16.432592@1] UBIFS: FS size: 31211520 bytes (29 MiB, 15 LEBs), journal size 18726913 bytes (17 MiB, 9 LEBs)
- [ 16.442516@1] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 16.447593@1] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 527C9EBE-B0E8-44D7-ABC2-E753370B489F, small LPT model
- [ 16.748807@0] unionfs: new lower inode mtime (bindex=1, name=var)
- [ 16.754177@0] unionfs: new lower inode mtime (bindex=1, name=var)
- [ 16.882597@1] wetekdvb: module license 'Proprietary' taints kernel.
- [ 16.882611@1] Disabling lock debugging due to kernel taint
- [ 16.883575@1] wetek-dvb dvb.8: Loading ...
- [ 17.217593@1] DVB: registering new adapter (WetekPlay_DVB)
- [ 17.217623@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
- [ 17.228372@0] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
- [ 17.239450@0] wetek-dvb dvb.8: fifo0/2097152/1048576
- [ 17.244531@0] wetek-dvb dvb.8: FLUSH FIFO0
- [ 17.244552@0] wetek-dvb dvb.8: FLUSH ok
- [ 17.244599@0] wetek-dvb dvb.8: fifo1/2097152/1048576
- [ 17.249363@1] wetek-dvb dvb.8: FLUSH FIFO1
- [ 17.249384@1] wetek-dvb dvb.8: FLUSH ok
- [ 17.249394@1] wetek-dvb dvb.8: Loading finished
- [ 17.316805@1] UBIFS: background thread "ubifs_bgt0_2" started, PID 1050
- [ 17.501512@0] UBIFS: recovery needed
- [ 18.544284@0] UBIFS: recovery completed
- [ 18.544402@0] UBIFS: mounted UBI device 0, volume 2, name "persist"
- [ 18.544410@0] UBIFS: LEB size: 2080768 bytes (2032 KiB), min./max. I/O unit sizes: 8192 bytes/8192 bytes
- [ 18.544418@0] UBIFS: FS size: 18726912 bytes (17 MiB, 9 LEBs), journal size 14565377 bytes (13 MiB, 5 LEBs)
- [ 18.544423@0] UBIFS: reserved for root: 884517 bytes (863 KiB)
- [ 18.544433@0] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 19B3FF86-1B2C-43F1-8D0F-88EE0EB56DC5, small LPT model
- [ 18.610961@0] force enable DISCARD here for ext4 fs
- [ 18.610983@0] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
- [ 18.611485@0] force enable DISCARD here for ext4 fs
- [ 18.611496@0] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
- [ 18.611926@0] force enable DISCARD here for ext4 fs
- [ 20.918529@1] EXT4-fs (mmcblk0p1): recovery complete
- [ 20.921199@1] checked enable EXT4 DISCARD here
- [ 20.921309@1] EXT4-fs (mmcblk0p1): mounting with "discard" option, but the device does not support discard
- [ 20.921405@1] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 21.500255@1] netdev_open
- [ 21.500275@1] Ethernet reset
- [ 21.500283@1] NET MDA descpter start addr=ee96a000
- [ 21.501154@1] phy_interface = 1
- [ 21.501173@1] aml_phy_init: trying to attach to 0:01
- [ 21.501218@1] /**************************************amlogic 8720 phy driver init********************************************/
- [ 21.501282@1] --1--write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 21.501303@1] --2--write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 21.501317@1] write mac add to:eddf0188: e8 18 63 50 6d 92 |.cPm.|
- [ 21.501332@1] Current DMA mode=0, set mode=621c100
- [ 21.501370@1] eth0: opened (irq 40).
- [ 21.501378@1] ether leave promiscuous mode
- [ 21.501383@1] ether leave all muticast mode
- [ 21.501437@1] changed the Multicast,mcount=1
- [ 21.501448@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 21.501453@1] set hash low=0,high=1
- [ 21.501457@1] changed the filter setting to :4
- [ 21.699520@0] dhd_open: Enter edd4c000
- [ 21.699551@0]
- [ 21.699551@0] Dongle Host Driver, version 1.88.45.4 (r420671)
- [ 21.699551@0] Compiled in drivers/net/wireless/bcmdhd on Nov 15 2015 at 14:50:14
- [ 21.699564@0] wl_android_wifi_on in 1
- [ 21.699572@0] wl_android_wifi_on in 2: g_wifi_on=0
- [ 21.699597@0] WIFI Disable! 112
- [ 21.949866@0] WIFI Enable! 112
- [ 22.244196@0] sdio_reset_comm():
- [ 22.259662@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 22.261428@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 22.263189@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 22.266356@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 22.281946@0] [sdio_reinit] finish
- [ 22.394083@1] =========== WLAN going back to live ========
- [ 22.394476@0]
- [ 22.394476@0]
- [ 22.394476@0] dhd_bus_devreset: == WLAN ON ==
- [ 22.394489@0] dhd_bus_devreset called when dongle is not in reset
- [ 22.394494@0] Will call dhd_bus_start instead
- [ 22.394555@0] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
- [ 22.394711@0] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm40181a2.bin
- [ 22.397561@0] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt
- [ 22.397575@0] Final fw_path=/lib/firmware/brcm/fw_bcm40181a2.bin
- [ 22.397581@0] Final nv_path=/lib/firmware/brcm/ap6210-nvram.txt
- [ 22.397587@0] Final conf_path=/lib/firmware/brcm/config.txt
- [ 22.454433@0] NVRAM version: GB9662_NVRAM_V1.3_12142012
- [ 22.455103@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 22.455758@0] dhd_bus_init: delay 100ms for BCM43362
- [ 22.682743@0] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 22.682917@0] bcmsdh_set_drvdata: Enter
- [ 22.682929@0] bcmsdh_register_oob_intr: Enter
- [ 22.682938@0] bcmsdh_register_oob_intr: IRQ=100 Type=414
- [ 22.684642@0] dhd_conf_set_band: Set band 0
- [ 22.686366@1] Firmware up: op_mode=0x0002, Broadcom Dongle Host Driver mac=02:1a:11:fd:e5:3c
- [ 22.686378@1] dhd_conf_set_country: Set country ALL, revision 0
- [ 22.784346@1] Country code: ALL (ALL/0)
- [ 22.784814@1] dhd_conf_set_roam: Set roam_off 1
- [ 22.787396@0] dhdcdc_set_ioctl: msg->status:ffffffe9
- [ 22.787415@0] dhd_preinit_ioctls buf_key_b4_m4 set failed -23
- [ 22.791213@1] dhdcdc_set_ioctl: msg->status:ffffffe9
- [ 22.791728@1] Driver: 1.88.45.4 (r420671)
- [ 22.791728@1] Firmware: wl0: Dec 10 2012 15:10:32 version 5.90.195.89.1_edon/off_0xb8bf FWID 01-0
- [ 22.792315@1] wl_android_wifi_on: Success
- [ 22.802900@1] dhd_open: Exit ret=0
- [ 23.233264@1] device wlan0 entered promiscuous mode
- [ 23.233518@1] br0: port 1(wlan0) entered forwarding state
- [ 23.233538@1] br0: port 1(wlan0) entered forwarding state
- [ 23.245746@1] Disconnect STA : ff:ff:ff:ff:ff:ff scb_val.val 3
- [ 23.254042@1] netdev_ifidx(3), chan_type(1) target channel(6)
- [ 23.320162@1] CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
- [ 23.320187@1] CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
- [ 23.384856@1] unionfs: new lower inode mtime (bindex=1, name=var)
- [ 24.139245@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 0, master_no(1) 300K addr 0xc
- [ 24.139310@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 1, master_no(1) 300K addr 0xc
- [ 24.139583@1] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) token 0, master_no(1) 300K addr 0xc
- [ 24.139594@1] i2c i2c-1: i2c wr failed=-11
- [ 24.247422@1] i2c i2c-1: Uploading demod firmware (dvb-fe-avl6211.fw)...
- [ 24.467214@0] unionfs: new lower inode mtime (bindex=1, name=usr)
- [ 24.467269@0] unionfs: new lower inode mtime (bindex=1, name=lib)
- [ 24.497202@1] libphy: 0:01 - Link is Up - 100/Full
- [ 24.870421@0] changed the Multicast,mcount=1
- [ 24.870457@0] add mac address:01:00:5e:00:00:01,bit=32
- [ 24.880642@1] changed the Multicast,mcount=1
- [ 24.880670@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 24.998273@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.121338@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.121439@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 25.144143@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.172028@1] changed the Multicast,mcount=1
- [ 25.172049@1] add mac address:01:00:5e:00:00:01,bit=32
- [ 25.175470@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 25.547301@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 25.650782@0] i2c i2c-1: AVL6211+AV2011 init OK
- [ 25.678110@0] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1489000 symbol_rate=11719000
- [ 25.678606@1] wetek-dvb dvb.8: start_feed_dmx0
- [ 25.678620@1] wetek-dvb dvb.8: FLUSH FIFO0
- [ 25.678629@1] wetek-dvb dvb.8: FLUSH ok
- [ 25.678636@1] wetek-dvb dvb.8: FIFO0<->0
- [ 25.737147@0] i2c i2c-1: BF is 64,BW is 10688
- [ 26.029171@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 26.197438@0] i2c i2c-1: Tuner successfully lock!
- [ 26.324058@1] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 26.329931@1] unionfs: new lower inode mtime (bindex=1, name=xml)
- [ 26.357441@0] i2c i2c-1: Service locked!!!
- [ 26.411620@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 26.420367@0] unionfs: new lower inode mtime (bindex=1, name=email)
- [ 26.458912@1] unionfs: new lower inode mtime (bindex=1, name=xml)
- [ 27.208638@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 27.257905@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 27.289288@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 27.406334@1] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 27.614610@1] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 27.627892@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 27.839308@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 27.945169@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 28.041527@0] unionfs: new lower inode mtime (bindex=1, name=webassets)
- [ 28.177432@0] unionfs: new lower inode mtime (bindex=1, name=filter)
- [ 28.300044@0] unionfs: new lower inode mtime (bindex=1, name=filter)
- [ 28.367912@0] unionfs: new lower inode mtime (bindex=1, name=filter)
- [ 29.011084@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 29.229086@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 29.270930@0] unionfs: new lower inode mtime (bindex=1, name=python2.7)
- [ 29.615280@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 29.774463@0] unionfs: new lower inode mtime (bindex=1, name=mako)
- [ 29.817939@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 30.123259@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.140831@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.150146@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.170506@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.421769@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 30.428378@0] unionfs: new lower inode mtime (bindex=1, name=migrations)
- [ 30.442410@0] unionfs: new lower inode mtime (bindex=1, name=migrations)
- [ 30.734833@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.744516@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.755076@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.851602@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 30.907296@0] unionfs: new lower inode mtime (bindex=1, name=plugins)
- [ 31.026374@0] unionfs: new lower inode mtime (bindex=1, name=librarian)
- [ 31.082541@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 31.307943@0] unionfs: new lower inode mtime (bindex=1, name=site-packages)
- [ 38.237027@1] br0: port 1(wlan0) entered forwarding state
- [ 79.088945@1] i2c i2c-1: avl6211_set_frontend: delivery_system=5 frequency=1489000 symbol_rate=11719000
- [ 79.147421@1] i2c i2c-1: BF is 64,BW is 10688
- [ 79.667358@0] i2c i2c-1: Tuner successfully lock!
- [ 79.807400@0] i2c i2c-1: Service locked!!!
- outernet@outernet:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement