API tools faq
paste
Advertisement
Guest User

serial log

a guest
Sep 26th, 2014
292
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.34 KB | None | 0 0
raw download clone embed print report
  1.  
  2.  
  3. U-Boot 2014.01 (Aug 04 2014 - 14:41:50)
  4.  
  5. CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz
  6. Reset cause: POR
  7. Board: Wandboard
  8. I2C: ready
  9. DRAM: 512 MiB
  10. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  11. auto-detected panel HDMI
  12. Display: HDMI (1024x768)
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Net: FEC [PRIME]
  17. Hit any key to stop autoboot: 0
  18. mmc0 is current device
  19. reading boot.scr
  20. ** Unable to read file boot.scr **
  21. reading zImage
  22. 5301352 bytes read in 254 ms (19.9 MiB/s)
  23. Booting from mmc ...
  24. reading imx6dl-wandboard.dtb
  25. 41783 bytes read in 19 ms (2.1 MiB/s)
  26. Kernel image @ 0x12000000 [ 0x000000 - 0x50e468 ]
  27. ## Flattened Device Tree blob at 18000000
  28. Booting using the fdt blob at 0x18000000
  29. Using Device Tree in place at 18000000, end 1800d336
  30.  
  31. Starting kernel ...
  32.  
  33. Booting Linux on physical CPU 0x0
  34. Linux version 3.10.17-1.0.0-wandboard+g9d567e4 (minda@minda-HP-dx2480-MT-VP562PA) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Sep 26 16:57:34 IST 2014
  35. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  36. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  37. Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Wandboard i.MX6 Dual Lite Board
  38. cma: CMA: reserved 256 MiB at 20000000
  39. Memory policy: ECC disabled, Data cache writealloc
  40. PERCPU: Embedded 8 pages/cpu @81119000 s8832 r8192 d15744 u32768
  41. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  42. Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw video=mxcfb0:dev=ldb,LDB-XGA,if=RGB666 ldb=sin1
  43. PID hash table entries: 2048 (order: 1, 8192 bytes)
  44. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  45. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  46. Memory: 512MB = 512MB total
  47. Memory: 243636k/243636k available, 280652k reserved, 0K highmem
  48. Virtual kernel memory layout:
  49. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  50. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  51. vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
  52. lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
  53. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  54. .text : 0x80008000 - 0x80c0a154 (12297 kB)
  55. .init : 0x80c0b000 - 0x80c4f280 ( 273 kB)
  56. .data : 0x80c50000 - 0x80ca0860 ( 323 kB)
  57. .bss : 0x80ca0860 - 0x80d055a0 ( 404 kB)
  58. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  59. Preemptible hierarchical RCU implementation.
  60. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  61. NR_IRQS:16 nr_irqs:16 16
  62. L310 cache controller enabled
  63. l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32050000, Cache size: 524288 B
  64. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  65. CPU identified as i.MX6DL, silicon rev 1.1
  66. Console: colour dummy device 80x30
  67. Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  68. pid_max: default: 32768 minimum: 301
  69. Mount-cache hash table entries: 512
  70. CPU: Testing write buffer coherency: ok
  71. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  72. Setting up static identity map for 0x80634fd8 - 0x80635030
  73. Brought up 1 CPUs
  74. SMP: Total of 1 processors activated (1581.05 BogoMIPS).
  75. CPU: All CPU(s) started in SVC mode.
  76. devtmpfs: initialized
  77. pinctrl core: initialized pinctrl subsystem
  78. regulator-dummy: no parameters
  79. NET: Registered protocol family 16
  80. DMA: preallocated 256 KiB pool for atomic coherent allocations
  81. Use WDOG1 as reset source
  82. syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
  83. vdd1p1: 800 <--> 1375 mV at 1125 mV
  84. vdd3p0: 2800 <--> 3150 mV at 3000 mV
  85. vdd2p5: 2000 <--> 2750 mV at 2425 mV
  86. cpu: 725 <--> 1450 mV at 1150 mV
  87. vddpu: 725 <--> 1450 mV at 1150 mV
  88. vddsoc: 725 <--> 1450 mV at 1175 mV
  89. syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
  90. syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
  91. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  92. hw-breakpoint: maximum watchpoint size is 4 bytes.
  93. imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  94. bio: create slab <bio-0> at 0
  95. mxs-dma 110000.dma-apbh: initialized
  96. 1P8V: 1800 mV
  97. 2P5V: 2500 mV
  98. 3P3V: 3300 mV
  99. usb_otg_vbus: 5000 mV
  100. i2c-core: driver [max17135] using legacy suspend method
  101. i2c-core: driver [max17135] using legacy resume method
  102. SCSI subsystem initialized
  103. usbcore: registered new interface driver usbfs
  104. usbcore: registered new interface driver hub
  105. usbcore: registered new device driver usb
  106. i2c i2c-0: IMX I2C adapter registered
  107. i2c i2c-1: IMX I2C adapter registered
  108. i2c i2c-2: IMX I2C adapter registered
  109. Linux video capture interface: v2.00
  110. pps_core: LinuxPPS API ver. 1 registered
  111. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  112. PTP clock support registered
  113. imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  114. mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
  115. mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
  116. MIPI CSI2 driver module loaded
  117. Advanced Linux Sound Architecture Driver Initialized.
  118. cfg80211: Calling CRDA to update world regulatory domain
  119. Switching to clocksource mxc_timer1
  120. NET: Registered protocol family 2
  121. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  122. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  123. TCP: Hash tables configured (established 4096 bind 4096)
  124. TCP: reno registered
  125. UDP hash table entries: 256 (order: 1, 8192 bytes)
  126. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  127. NET: Registered protocol family 1
  128. RPC: Registered named UNIX socket transport module.
  129. RPC: Registered udp transport module.
  130. RPC: Registered tcp transport module.
  131. RPC: Registered tcp NFSv4.1 backchannel transport module.
  132. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  133. pureg-dummy: no parameters
  134. Bus freq driver module loaded
  135. wandboard-rfkill rfkill.25: Wandboard rfkill initialization
  136. wandboard-rfkill rfkill.25: initialize wifi chip
  137. wandboard-rfkill rfkill.25: wifi-rfkill registered.
  138. wandboard-rfkill rfkill.25: initialize bluetooth chip
  139. wandboard-rfkill rfkill.25: bluetooth-rfkill registered.
  140. VFS: Disk quotas dquot_6.5.2
  141. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  142. NFS: Registering the id_resolver key type
  143. Key type id_resolver registered
  144. Key type id_legacy registered
  145. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  146. fuse init (API version 7.22)
  147. msgmni has been set to 987
  148. io scheduler noop registered
  149. io scheduler deadline registered
  150. io scheduler cfq registered (default)
  151. imx-weim 21b8000.weim: WEIM driver registered.
  152. mxc_ldb fb.26: get ldb of property fail
  153. mxc_ldb: probe of fb.26 failed with error -22
  154. mxc_ldb fb.27: get ldb of property fail
  155. mxc_ldb: probe of fb.27 failed with error -22
  156. mxc_ldb fb.28: get ldb of property fail
  157. mxc_ldb: probe of fb.28 failed with error -22
  158. mxc_ldb fb.29: get ldb of property fail
  159. mxc_ldb: probe of fb.29 failed with error -22
  160. MIPI DSI driver module loaded
  161. mxc_sdc_fb fb.26: register mxc display driver ldb
  162. mxc_sdc_fb fb.26: NO mxc display driver found!
  163. mxc_sdc_fb fb.27: register mxc display driver ldb
  164. mxc_sdc_fb fb.27: NO mxc display driver found!
  165. mxc_sdc_fb fb.28: register mxc display driver ldb
  166. mxc_sdc_fb fb.28: NO mxc display driver found!
  167. mxc_sdc_fb fb.29: register mxc display driver ldb
  168. mxc_sdc_fb fb.29: NO mxc display driver found!
  169. imx-sdma 20ec000.sdma: no iram assigned, using external mem
  170. imx-sdma 20ec000.sdma: initialized
  171. imx-sdma 20ec000.sdma: loaded firmware 1.1
  172. Serial: IMX driver
  173. 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  174. console [ttymxc0] enabled
  175. 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  176. serial: Freescale lpuart driver
  177. [drm] Initialized drm 1.1.0 20060810
  178. [drm] Initialized vivante 1.0.0 20120216 on minor 0
  179. brd: module loaded
  180. loop: module loaded
  181. CAN device driver interface
  182. libphy: fec_enet_mii_bus: probed
  183. fec 2188000.ethernet eth0: registered PHC device 0
  184. hso: drivers/net/usb/hso.c: Option Wireless
  185. usbcore: registered new interface driver hso
  186. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  187. usbcore: registered new interface driver usb-storage
  188. ci_hdrc ci_hdrc.1: doesn't support gadget
  189. ci_hdrc ci_hdrc.1: EHCI Host Controller
  190. ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  191. ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  192. hub 1-0:1.0: USB hub found
  193. hub 1-0:1.0: 1 port detected
  194. mousedev: PS/2 mouse device common for all mice
  195. i2c-core: driver [isl29023] using legacy suspend method
  196. i2c-core: driver [isl29023] using legacy resume method
  197. snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
  198. i2c /dev entries driver
  199. i2c-core: driver [mag3110] using legacy suspend method
  200. i2c-core: driver [mag3110] using legacy resume method
  201. imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
  202. cpuidle: using governor ladder
  203. cpuidle: using governor menu
  204. sdhci: Secure Digital Host Controller Interface driver
  205. sdhci: Copyright(c) Pierre Ossman
  206. sdhci-pltfm: SDHCI platform and OF driver helper
  207. sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
  208. mmc0: no vqmmc regulator found
  209. mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  210. sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
  211. mmc1: no vqmmc regulator found
  212. mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  213. sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  214. mmc2: no vqmmc regulator found
  215. mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  216. Galcore version 4.6.9.9754
  217. mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  218. mxc_asrc 2034000.asrc: mxc_asrc registered
  219. mxc_vpu 2040000.vpu: VPU initialized
  220. caam 2100000.caam: device ID = 0x0a16010000000100 (Era -524)
  221. caam 2100000.caam: job rings = 2, qi = 0
  222. caam 2100000.caam: authenc-hmac-md5-cbc-aes-caam
  223. caam 2100000.caam: authencesn-hmac-md5-cbc-aes-caam
  224. caam 2100000.caam: authenc-hmac-sha1-cbc-aes-caam
  225. caam 2100000.caam: authencesn-hmac-sha1-cbc-aes-caam
  226. caam 2100000.caam: authenc-hmac-sha224-cbc-aes-caam
  227. caam 2100000.caam: authencesn-hmac-sha224-cbc-aes-caam
  228. caam 2100000.caam: authenc-hmac-sha256-cbc-aes-caam
  229. caam 2100000.caam: authencesn-hmac-sha256-cbc-aes-caam
  230. caam 2100000.caam: authenc-hmac-md5-cbc-des3_ede-caam
  231. caam 2100000.caam: authencesn-hmac-md5-cbc-des3_ede-caam
  232. mmc2: host does not support reading read-only switch. assuming write-enable.
  233. caam 2100000.caam: authenc-hmac-sha1-cbc-des3_ede-caam
  234. mmc2: new high speed SDHC card at address e624
  235. caam 2100000.caam: authencesn-hmac-sha1-cbc-des3_ede-caam
  236. caam 2100000.caam: authenc-hmac-sha224-cbc-des3_ede-caam
  237. mmcblk0: mmc2:e624 SU04G 3.69 GiB
  238. caam 2100000.caam: authencesn-hmac-sha224-cbc-des3_ede-caam
  239. mmcblk0: p1 p2
  240. caam 2100000.caam: authenc-hmac-sha256-cbc-des3_ede-caam
  241. caam 2100000.caam: authencesn-hmac-sha256-cbc-des3_ede-caam
  242. caam 2100000.caam: authenc-hmac-md5-cbc-des-caam
  243. caam 2100000.caam: authencesn-hmac-md5-cbc-des-caam
  244. caam 2100000.caam: authenc-hmac-sha1-cbc-des-caam
  245. caam 2100000.caam: authencesn-hmac-sha1-cbc-des-caam
  246. caam 2100000.caam: authenc-hmac-sha224-cbc-des-caam
  247. caam 2100000.caam: authencesn-hmac-sha224-cbc-des-caam
  248. caam 2100000.caam: authenc-hmac-sha256-cbc-des-caam
  249. caam 2100000.caam: authencesn-hmac-sha256-cbc-des-caam
  250. caam 2100000.caam: ecb-des-caam
  251. caam 2100000.caam: ecb-arc4-caam
  252. caam 2100000.caam: ecb-aes-caam
  253. caam 2100000.caam: ctr-aes-caam
  254. caam 2100000.caam: cbc-aes-caam
  255. caam 2100000.caam: ecb-des3-caam
  256. caam 2100000.caam: cbc-3des-caam
  257. caam 2100000.caam: cbc-des-caam
  258. caam 2100000.caam: fsl,sec-v4.0 algorithms registered in /proc/crypto
  259. platform 2101000.jr0: registering rng-caam
  260. platform caam_sm: caam_sm_test: 8-byte key test match OK
  261. platform caam_sm: caam_sm_test: 16-byte key test match OK
  262. platform caam_sm: caam_sm_test: 32-byte key test match OK
  263. platform caam_secvio.32: security violation service handlers armed
  264. usbcore: registered new interface driver usbhid
  265. usbhid: USB HID core driver
  266. i2c-core: driver [cs42888] using legacy suspend method
  267. i2c-core: driver [cs42888] using legacy resume method
  268. sgtl5000 1-000a: sgtl5000 revision 0x11
  269. fsl-hdmi-dai hdmi_audio.16: failed to probe. Load HDMI-video first.
  270. fsl-hdmi-dai: probe of hdmi_audio.16 failed with error -12
  271. sgtl5000 1-000a: Failed to get supply 'VDDD': -19
  272. 1-000a: 1200 mV normal
  273. sgtl5000 1-000a: Using internal LDO instead of VDDD
  274. imx-sgtl5000 sound.22: sgtl5000 <-> 2028000.ssi mapping ok
  275. imx-spdif sound-spdif.23: dit-hifi <-> 2004000.spdif mapping ok
  276. imx-audio-hdmi sound-hdmi.24: initialize HDMI-audio failed. load HDMI-video first!
  277. TCP: cubic registered
  278. NET: Registered protocol family 10
  279. sit: IPv6 over IPv4 tunneling driver
  280. NET: Registered protocol family 17
  281. can: controller area network core (rev 20120528 abi 9)
  282. NET: Registered protocol family 29
  283. can: raw protocol (rev 20120528)
  284. can: broadcast manager protocol (rev 20120528 t)
  285. can: netlink gateway (rev 20130117) max_hops=1
  286. 8021q: 802.1Q VLAN Support v1.8
  287. Key type dns_resolver registered
  288. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  289. snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0)
  290. ALSA device list:
  291. #0: imx6-wandboard-sgtl5000
  292. #1: imx-spdif
  293. kjournald starting. Commit interval 5 seconds
  294. EXT3-fs (mmcblk0p2): using internal journal
  295. EXT3-fs (mmcblk0p2): recovery complete
  296. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  297. VFS: Mounted root (ext3 filesystem) on device 179:2.
  298. devtmpfs: mounted
  299. Freeing unused kernel memory: 272K (80c0b000 - 80c4f000)
  300. INIT: version 2.88 booting
  301. Error opening /dev/fb0: No such file or directory
  302. Starting udev
  303. udevd[156]: starting version 182
  304. Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
  305. bootlogd.
  306. ov5640_read_reg:write reg error:reg=300a
  307. camera ov5640_mipi is not found
  308. ERROR: v4l2 capture: slave not found!
  309. FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  310. ALSA: Restoring mixer settings...
  311. No state is present for card imx6wandboardsg
  312. Found hardware: "imx6-wandboard-" "" "" "" ""
  313. Hardware is initialized using a generic method
  314. No state is present for card imx6wandboardsg
  315. No state is present for card imxspdif
  316. Found hardware: "imx-spdif" "" "" "" ""
  317. Hardware is initialized using a generic method
  318. No state is present for card imxspdif
  319. Tue Aug 12 14:34:00 UTC 2014
  320. INIT: Entering runlevel: 5
  321. Configuring network interfaces... fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:01, irq=-1)
  322. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  323. udhcpc (v1.22.1) started
  324. Sending discover...
  325. libphy: 2188000.ethernet:01 - Link is Up - 100/Full
  326. IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  327. Sending discover...
  328. Sending discover...
  329. No lease, failing
  330. Starting Xserver
  331. Starting system message bus: open /dev/fb0: No such file or directory
  332. dbus.
  333. Starting OpenBSD Secure Shell server: sshd
  334. done.
  335. Starting rpcbind daemon...done.
  336. Starting advanced power management daemon: No APM support in kernel
  337. (failed.)
  338. Starting syslogd/klogd: done
  339. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
  340. ...done.
  341. Starting Telephony daemon
  342. Starting Linux NFC daemon
  343. Running local boot scripts (/etc/rc.local).
  344. Stopping Bootlog daemon: bootlogd.
  345.  
  346. Poky (Yocto Project Reference Distro) 1.6.1 wandboard-solo /dev/ttymxc0
  347.  
  348. wandboard-solo login: root
  349. root@wandboard-solo:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!