API tools faq
paste
Guest User

Firefly-RK3288_DualBoot_201412111722.img

a guest
Dec 19th, 2014
530
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 117.76 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.00 20141007
  2. In
  3. SRX
  4. Channel a: DDR3 200MHz
  5. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  6. Channel b: DDR3 200MHz
  7. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  8. OUT
  9.  
  10.  
  11. U-Boot 2014.10-RK3288-02 (Nov 26 2014 - 09:28:44)
  12.  
  13. CPU: rk3288
  14. CPU's clock information:
  15. arm pll = 600000000HZ
  16. periph pll = 300000000HZ
  17. ddr pll = 200000000HZ
  18. codec pll = 594000000HZ
  19. Board: Rockchip platform Board
  20. DRAM: Found dram banks:1
  21. Adding bank:0000000000000000(0000000080000000)
  22. 128 MiB
  23. storage init OK!
  24. Using default environment
  25.  
  26. GetParam
  27. check parameter success
  28. Unknow param: MACHINE_MODEL:rk30sdk!
  29. Unknow param: MACHINE_ID:007!
  30. Unknow param: MANUFACTURER:RK30SDK!
  31. Unknow param: PWR_HLD: 0,0,A,0,1!
  32. failed to prepare fdt from boot!
  33. power key: bank-0 pin-5
  34. can't find dts node for ricoh619
  35. pmic:act8846
  36. Can't find dts node for fuel guage cw201x
  37. SecureBootEn = 0, SecureBootLock = 0
  38.  
  39. #Boot ver: 2014-11-26#2.17
  40. sn:****************
  41. checkKey
  42. vbus = 0
  43. no fuel gauge found
  44. no fuel gauge found
  45. read logo_on switch from dts [0]
  46. no fuel gauge found
  47. Hit any key to stop autoboot: 0
  48. failed to load fdt from boot!
  49. kernel @ 0x02000000 (0x005f8ad8)
  50. ramdisk @ 0x04bf0000 (0x00120fad)
  51. Secure Boot state: 0
  52. bootrk: do_bootm_linux...
  53. Loading Device Tree to 0480c000, end 04827184 ... OK
  54. Add bank:0000000000000000, 0000000080000000
  55.  
  56. Starting kernel ...
  57.  
  58. <hit enter to activate fiq debugger>
  59. [ 0.000000] Booting Linux on physical CPU 0x500
  60. [ 0.000000] Initializing cgroup subsys cpu
  61. [ 0.000000] Initializing cgroup subsys cpuacct
  62. [ 0.000000] Linux version 3.10.0 (dujw@tchipserver2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #62 SMP PREEMPT Thu Dec 11 17:18:43 CST 2014
  63. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  64. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  65. [ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
  66. [ 0.000000] hdmi init vic is -1
  67. [ 0.000000] rockchip_ion_reserve
  68. [ 0.000000] cma: CMA: reserved 16 MiB at 2e800000
  69. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  70. [ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
  71. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1eb6000 s14016 r8192 d14656 u36864
  72. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
  73. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00620000@0x00414000(linuxroot),-@0x00a34000(user) storagemedia=emmc loader.timestamp=2014-11-26_09:28:44 hdmi.vic=-1 androidboot.serialno=****************
  74. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  77. [ 0.000000] Memory: 2048MB = 2048MB total
  78. [ 0.000000] Memory: 2047084k/2047084k available, 50068k reserved, 1318912K highmem
  79. [ 0.000000] Virtual kernel memory layout:
  80. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  81. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  82. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  83. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  84. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  85. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  86. [ 0.000000] .text : 0xc0008000 - 0xc0a76cb8 (10684 kB)
  87. [ 0.000000] .init : 0xc0a77000 - 0xc0cc66c0 (2366 kB)
  88. [ 0.000000] .data : 0xc0cc8000 - 0xc0d64ec8 ( 628 kB)
  89. [ 0.000000] .bss : 0xc0d64ec8 - 0xc0e7ee04 (1128 kB)
  90. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  91. [ 0.000000] Preemptible hierarchical RCU implementation.
  92. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  93. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  94. [ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
  95. [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
  96. [ 0.000000] rkclk_init_clks: cnt_parent = 7
  97. [ 0.000000] rkclk_init_clks: cnt_rate = 32
  98. [ 0.000000] Architected local timer running at 24.00MHz (phys).
  99. [ 0.000000] Switching to timer-based delay loop
  100. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  101. [ 0.000000] process version: 0
  102. [ 0.000000] channel:0, lkg:0
  103. [ 0.000000] target-temp:95
  104. [ 0.000000] channel:2, lkg:0
  105. [ 0.000000] target-temp:95
  106. [ 0.000000] channel:0, lkg:0
  107. [ 0.000000] target-temp:95
  108. [ 0.000000] channel:1, lkg:0
  109. [ 0.000000] target-temp:95
  110. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  111. [ 0.526593] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  112. [ 0.526645] pid_max: default: 32768 minimum: 301
  113. [ 0.526985] Security Framework initialized
  114. [ 0.527028] SELinux: Initializing.
  115. [ 0.527258] Mount-cache hash table entries: 512
  116. [ 0.529301] Initializing cgroup subsys debug
  117. [ 0.529343] Initializing cgroup subsys freezer
  118. [ 0.529434] CPU: Testing write buffer coherency: ok
  119. [ 0.530191] /cpus/cpu@0 missing clock-frequency property
  120. [ 0.530233] /cpus/cpu@1 missing clock-frequency property
  121. [ 0.530266] /cpus/cpu@2 missing clock-frequency property
  122. [ 0.530299] /cpus/cpu@3 missing clock-frequency property
  123. [ 0.530422] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  124. [ 0.530534] Setting up static identity map for 0xc078b0a8 - 0xc078b100
  125. [ 0.535172] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1552 (version 3.0)
  126. [ 0.614479] CPU1: Booted secondary processor
  127. [ 0.614571] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  128. [ 0.634205] CPU2: Booted secondary processor
  129. [ 0.634286] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  130. [ 0.653994] CPU3: Booted secondary processor
  131. [ 0.654077] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  132. [ 0.654448] Brought up 4 CPUs
  133. [ 0.654548] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  134. [ 0.654578] CPU: All CPU(s) started in SVC mode.
  135. [ 0.656813] devtmpfs: initialized
  136. [ 0.675111] pinctrl core: initialized pinctrl subsystem
  137. [ 0.675837] regulator-dummy: no parameters
  138. [ 0.677465] NET: Registered protocol family 16
  139. [ 0.683064] DMA: preallocated 256 KiB pool for atomic coherent allocations
  140. [ 0.684050] ion_snapshot: 0x2e230000 map to 0xf0107000 and copy to 0xc0e5a454 (version 0.1)
  141. [ 0.684544] Registered FIQ tty driver
  142. [ 0.688097] console [ttyFIQ0] enabled
  143. [ 0.688566] Registered fiq debugger ttyFIQ0
  144. [ 0.690776] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
  145. [ 0.690862] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
  146. [ 0.690935] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
  147. [ 0.691008] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
  148. [ 0.691273] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
  149. [ 0.691507] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
  150. [ 0.691734] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
  151. [ 0.691959] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
  152. [ 0.692184] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
  153. [ 0.692406] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
  154. [ 0.692632] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
  155. [ 0.692858] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
  156. [ 0.693098] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
  157. [ 0.693334] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
  158. [ 0.693396] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
  159. [ 0.693500] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
  160. [ 0.693557] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
  161. [ 0.695296] rockchip_interrupts_register:bank_num=7
  162. [ 0.701882] of_get_gpio_init_config:gpio[0] = 256, value = 0
  163. [ 0.701971] of_get_gpio_init_config:gpio[1] = 233, value = 0
  164. [ 0.702054] of_get_gpio_init_config:gpio[2] = 136, value = 0
  165. [ 0.702229] rockchip_pinctrl_probe:init ok
  166. [ 0.722201] rk_iommu ff900800.iep_mmu: (iep) Enter
  167. [ 0.722548] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  168. [ 0.722603] rk_iommu ff900800.iep_mmu: (iep) Initialized
  169. [ 0.723223] rk_iommu ff950800.vip_mmu: (vip) Enter
  170. [ 0.723550] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  171. [ 0.723602] rk_iommu ff950800.vip_mmu: (vip) Initialized
  172. [ 0.724151] rk_iommu ff930300.vopb_mmu: (vopb) Enter
  173. [ 0.724477] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  174. [ 0.724532] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
  175. [ 0.725090] rk_iommu ff940300.vopl_mmu: (vopl) Enter
  176. [ 0.725416] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  177. [ 0.725469] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
  178. [ 0.726042] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
  179. [ 0.726422] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  180. [ 0.726476] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
  181. [ 0.727045] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
  182. [ 0.727362] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  183. [ 0.727415] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
  184. [ 0.727993] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
  185. [ 0.728372] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  186. [ 0.728425] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
  187. [ 0.734156] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  188. [ 0.734213] hw-breakpoint: maximum watchpoint size is 4 bytes.
  189. [ 0.734831] DDR DEBUG: version 1.00 20140603
  190. [ 0.734914] DDR DEBUG: Channel a:
  191. [ 0.734952] DDR DEBUG: DDR3 Device
  192. [ 0.735001] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  193. [ 0.735044] DDR DEBUG: Channel b:
  194. [ 0.735075] DDR DEBUG: DDR3 Device
  195. [ 0.735120] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  196. [ 0.735163] DDR DEBUG: addr=0xd6a000
  197. [ 0.735202] DDR DEBUG: stride=9, size=256, halfcap=40000000
  198. [ 0.735243] DDR DEBUG: socAddr[0]=0xd6a000, socAddr[1]=0xd6a100
  199. [ 0.735284] DDR DEBUG: chAddr[0]=0xd6a000, chAddr[1]=0xd6a000
  200. [ 0.735329] DDR DEBUG: dtar[0]=0x201ad000, dtar[1]=0x201ad000
  201. [ 0.735489] DDR DEBUG: init success!!! freq=200MHz
  202. [ 0.735525] DDR DEBUG: Channel a:
  203. [ 0.735573] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  204. [ 0.735632] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  205. [ 0.735690] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  206. [ 0.735748] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  207. [ 0.735800] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  208. [ 0.735843] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  209. [ 0.735882] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  210. [ 0.735916] DDR DEBUG: Channel b:
  211. [ 0.735962] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  212. [ 0.736020] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  213. [ 0.736078] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  214. [ 0.736135] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  215. [ 0.736187] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  216. [ 0.736229] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  217. [ 0.736268] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  218. [ 0.812795] bio: create slab <bio-0> at 0
  219. [ 0.814678] Enter firefly_noatx8_init
  220. [ 0.815144] firefly_noatx8_probe 51
  221. [ 0.815881] SCSI subsystem initialized
  222. [ 0.816378] usbcore: registered new interface driver usbfs
  223. [ 0.816532] usbcore: registered new interface driver hub
  224. [ 0.816814] usbcore: registered new device driver usb
  225. [ 0.819816] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
  226. [ 0.824177] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
  227. [ 0.825679] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
  228. [ 0.827153] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
  229. [ 0.827978] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
  230. [ 0.830839] media: Linux media interface: v0.10
  231. [ 0.830982] Linux video capture interface: v2.00
  232. [ 0.831137] pps_core: LinuxPPS API ver. 1 registered
  233. [ 0.831180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  234. [ 0.831262] PTP clock support registered
  235. [ 0.831801] rockchip_temp_probe,line=362
  236. [ 0.832601] tsadc ff280000.tsadc: initialized
  237. [ 0.833891] rockchip_ion_parse_dt: num_heaps = 1
  238. [ 0.833952] 0: 0 3 vmalloc 0x (null)
  239. [ 0.834712] Rockchip ion module is successfully loaded (v1.0)
  240. [ 0.835247] Advanced Linux Sound Architecture Driver Initialized.
  241. [ 0.836419] Bluetooth: Core ver 2.16
  242. [ 0.836592] NET: Registered protocol family 31
  243. [ 0.836635] Bluetooth: HCI device and connection manager initialized
  244. [ 0.836696] Bluetooth: HCI socket layer initialized
  245. [ 0.836747] Bluetooth: L2CAP socket layer initialized
  246. [ 0.836843] Bluetooth: SCO socket layer initialized
  247. [ 0.837526] cfg80211: Calling CRDA to update world regulatory domain
  248. [ 0.839874] act8846_i2c_probe,line=898
  249. [ 0.841342] act8846_parse_dt,line=746
  250. [ 0.842911] act8846_i2c_probe: act8846_pmic_hold=1
  251. [ 0.842981] act8846_i2c_probe: act8846_pmic_sleep=1
  252. [ 0.843037] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
  253. [ 0.843096] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
  254. [ 0.845560] act_dcdc1: 1200 mV
  255. [ 0.849246] vccio: 3300 mV
  256. [ 0.851885] vdd_logic: 700 <--> 1500 mV at 1125 mV
  257. [ 0.855558] act_dcdc4: 2000 mV
  258. [ 0.857373] vccio_sd: 1800 <--> 3300 mV at 3300 mV
  259. [ 0.860198] act_ldo2: 1050 mV
  260. [ 0.863207] act_ldo3: 1800 mV
  261. [ 0.866047] act_ldo4: 3300 mV
  262. [ 0.868934] act_ldo5: 3300 mV
  263. [ 0.871823] act_ldo6: 1100 mV
  264. [ 0.874679] vcc_18: 1800 mV
  265. [ 0.877522] act_ldo8: 1850 mV
  266. [ 0.883927] vdd_arm: 712 <--> 1500 mV at 1100 mV
  267. [ 0.890222] vdd_gpu: 712 <--> 1500 mV at 900 mV
  268. [ 0.891295] rk808_i2c_probe,line=1368
  269. [ 0.892930] The device is not rk808 -11
  270. [ 0.893196] rk808: probe of 0-001b failed with error -11
  271. [ 0.897965] Switching to clocksource arch_sys_counter
  272. [ 0.964474] rk-fb rockchip-fb: rk fb ion client create success!
  273. [ 0.964546] rk-fb rockchip-fb: rockchip framebuffer driver probe
  274. [ 0.965689] rk-screen rk_screen.9: rockchip screen probe success
  275. [ 0.966467] rk32-lvds rk32-lvds: rk32 lvds driver probe success
  276. [ 0.967242] rk32-edp ff970000.edp: screen is not edp!
  277. [ 0.967317] rk32-edp: probe of ff970000.edp failed with error -22
  278. [ 0.968439] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
  279. [ 0.969238] graphics fb0: rockchip framebuffer registerd:fb0
  280. [ 0.970254] graphics fb1: rockchip framebuffer registerd:fb1
  281. [ 0.970796] graphics fb2: rockchip framebuffer registerd:fb2
  282. [ 0.971337] graphics fb3: rockchip framebuffer registerd:fb3
  283. [ 0.971893] graphics fb4: rockchip framebuffer registerd:fb4
  284. [ 0.973565] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
  285. [ 0.973995] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  286. [ 0.974067] rk3288-lcdc lcdc0: wakeup from standby!
  287. [ 1.108503] alloc_buffer:ion_phy_addr=0x10000000
  288. [ 1.151834] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
  289. [ 1.285752] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
  290. [ 1.286917] rockchip_set_mux:warning ignore bank num 15
  291. [ 1.287342] rockchip_set_mux:warning ignore bank num 15
  292. [ 1.287738] rockchip_set_mux:warning ignore bank num 15
  293. [ 1.288133] rockchip_set_mux:warning ignore bank num 15
  294. [ 1.288533] rockchip_set_mux:warning ignore bank num 15
  295. [ 1.288914] rockchip_set_mux:warning ignore bank num 15
  296. [ 1.289795] rockchip_set_mux:warning ignore bank num 15
  297. [ 1.290277] rockchip_set_mux:warning ignore bank num 15
  298. [ 1.291159] rockchip_set_mux:warning ignore bank num 15
  299. [ 1.291660] rockchip_set_mux:warning ignore bank num 15
  300. [ 1.292539] rockchip_set_mux:warning ignore bank num 15
  301. [ 1.293042] rockchip_set_mux:warning ignore bank num 15
  302. [ 1.293826] rockchip_set_mux:warning ignore bank num 15
  303. [ 1.294344] rockchip_set_mux:warning ignore bank num 15
  304. [ 1.298615] NET: Registered protocol family 2
  305. [ 1.300102] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  306. [ 1.300589] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  307. [ 1.301086] TCP: Hash tables configured (established 8192 bind 8192)
  308. [ 1.301237] TCP: reno registered
  309. [ 1.301293] UDP hash table entries: 512 (order: 2, 16384 bytes)
  310. [ 1.301424] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  311. [ 1.302180] NET: Registered protocol family 1
  312. [ 1.302736] Unpacking initramfs...
  313. [ 1.526777] Freeing initrd memory: 1152K (c4bf0000 - c4d10000)
  314. [ 1.529067] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
  315. [ 1.530490] probe device ff9a0000.vpu_service
  316. [ 1.530932] vpu_service: power on
  317. [ 1.532084] checking hw id 4831
  318. [ 1.533133] vpu_service set to auto frequency mode
  319. [ 1.533341] vcodec vpu_service: vcodec ion client create success!
  320. [ 1.534435] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
  321. [ 1.534543] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
  322. [ 1.534596] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e27f000
  323. [ 1.534642] vpu_service: power off...
  324. [ 1.534727] done
  325. [ 1.534757] init success
  326. [ 1.534915] probe device ff9c0000.hevc_service
  327. [ 1.535517] hevc_service: power on
  328. [ 1.536640] checking hw id 6867
  329. [ 1.537469] vcodec hevc_service: vcodec ion client create success!
  330. [ 1.538457] rk_iommu ff9c0440.hevc_mmu: (hevc) Enabled
  331. [ 1.538568] rk_iommu ff9c0440.hevc_mmu: (hevc) Disabled
  332. [ 1.538621] rk_iommu ff9c0440.hevc_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e27c000
  333. [ 1.538668] hevc_service: power off...
  334. [ 1.538752] done
  335. [ 1.538783] init success
  336. [ 1.539160] rknandbase v1.0 2014-03-31
  337. [ 1.539787] rknand_probe clk rate = 148500000
  338. [ 1.540164] rknand_driver:ret = 0
  339. [ 1.541268] audit: initializing netlink socket (disabled)
  340. [ 1.541383] type=2000 audit(1.020:1): initialized
  341. [ 1.543687] bounce pool size: 64 pages
  342. [ 1.559303] fuse init (API version 7.22)
  343. [ 1.560551] msgmni has been set to 1456
  344. [ 1.566536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  345. [ 1.566596] io scheduler noop registered
  346. [ 1.566635] io scheduler deadline registered
  347. [ 1.566977] io scheduler cfq registered (default)
  348. [ 1.569297] rga ff920000.rga: rga ion client create success!
  349. [ 1.569730] rga: Driver loaded succesfully
  350. [ 1.571159] IEP Power ON
  351. [ 1.571277] iep ion client create success!
  352. [ 1.572250] rk_iommu ff900800.iep_mmu: (iep) Enabled
  353. [ 1.572339] IEP Power OFF
  354. [ 1.572388] rk_iommu ff900800.iep_mmu: (iep) Disabled
  355. [ 1.572440] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e272000
  356. [ 1.572503] IEP Driver loaded succesfully
  357. [ 1.572792] Module initialized.
  358. [ 1.575180] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
  359. [ 1.575252] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  360. [ 1.579675] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
  361. [ 1.579748] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  362. [ 1.580483] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
  363. [ 1.580548] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
  364. [ 1.580591] pwm_regulator_probe:error
  365. [ 1.580666] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
  366. [ 1.581725] rk_serial.c v1.8 2014-03-04
  367. [ 1.582359] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
  368. [ 1.582983] serial ff180000.serial: membase 0xf0172000
  369. [ 1.592825] loop: module loaded
  370. [ 1.594586] SCSI Media Changer driver v0.25
  371. [ 1.595580] tun: Universal TUN/TAP device driver, 1.6
  372. [ 1.595630] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  373. [ 1.597332] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  374. [ 1.597391] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
  375. [ 1.597440] stmmac_probe_config_dt: clock input or output? (input).
  376. [ 1.597484] stmmac_probe_config_dt: TX delay(0x30).
  377. [ 1.597525] stmmac_probe_config_dt: RX delay(0x10).
  378. [ 1.597650] stmmac_probe_config_dt: is rockchip,rk3288-gmac
  379. [ 1.597689] stmmc_pltfr_init:
  380. [ 1.597725] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  381. [ 1.597801] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
  382. [ 1.597840] stmmc_pltfr_init: init for RGMII
  383. [ 1.597880] tx delay=0x30
  384. [ 1.597880] rx delay=0x10
  385. [ 1.599310] stmmac - user ID: 0x10, Synopsys ID: 0x35
  386. [ 1.599350] Normal descriptors
  387. [ 1.599382] Ring mode enabled
  388. [ 1.599414] DMA HW capability register supported
  389. [ 1.599453] RX Checksum Offload Engine supported (type 2)
  390. [ 1.599490] TX Checksum insertion supported
  391. [ 1.599523] Wake-Up On Lan supported
  392. [ 1.599639] Enable RX Mitigation via HW Watchdog Timer
  393. [ 1.600934] PPP generic driver version 2.4.2
  394. [ 1.601415] PPP BSD Compression module registered
  395. [ 1.601461] PPP Deflate Compression module registered
  396. [ 1.601525] PPP MPPE Compression module registered
  397. [ 1.601568] NET: Registered protocol family 24
  398. [ 1.601662] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  399. [ 1.601711] CSLIP: code copyright 1989 Regents of the University of California.
  400. [ 1.601757] Rockchip WiFi SYS interface (V1.00) ...
  401. [ 1.601995] usbcore: registered new interface driver catc
  402. [ 1.602127] usbcore: registered new interface driver kaweth
  403. [ 1.602172] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  404. [ 1.602318] usbcore: registered new interface driver pegasus
  405. [ 1.602448] usbcore: registered new interface driver rtl8150
  406. [ 1.602574] usbcore: registered new interface driver r8152
  407. [ 1.602616] hso: drivers/net/usb/hso.c: Option Wireless
  408. [ 1.602821] usbcore: registered new interface driver hso
  409. [ 1.602972] usbcore: registered new interface driver asix
  410. [ 1.603099] usbcore: registered new interface driver ax88179_178a
  411. [ 1.603261] usbcore: registered new interface driver cdc_ether
  412. [ 1.603390] usbcore: registered new interface driver cdc_eem
  413. [ 1.603516] usbcore: registered new interface driver dm9601
  414. [ 1.603641] usbcore: registered new interface driver dm9620
  415. [ 1.603796] usbcore: registered new interface driver smsc75xx
  416. [ 1.603952] usbcore: registered new interface driver smsc95xx
  417. [ 1.604091] usbcore: registered new interface driver gl620a
  418. [ 1.604220] usbcore: registered new interface driver net1080
  419. [ 1.604359] usbcore: registered new interface driver plusb
  420. [ 1.604487] usbcore: registered new interface driver rndis_host
  421. [ 1.604614] usbcore: registered new interface driver cdc_subset
  422. [ 1.604737] usbcore: registered new interface driver zaurus
  423. [ 1.604869] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  424. [ 1.605048] usbcore: registered new interface driver int51x1
  425. [ 1.605187] usbcore: registered new interface driver kalmia
  426. [ 1.605319] usbcore: registered new interface driver ipheth
  427. [ 1.605463] usbcore: registered new interface driver sierra_net
  428. [ 1.605594] usbcore: registered new interface driver cx82310_eth
  429. [ 1.605754] usbcore: registered new interface driver cdc_ncm
  430. [ 1.605885] usbcore: registered new interface driver qmi_wwan
  431. [ 1.606025] usbcore: registered new interface driver cdc_mbim
  432. [ 1.606069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  433. [ 1.609365] ehci_rk_probe f1a00000 f1a00010
  434. [ 1.609426] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
  435. [ 1.609523] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
  436. [ 1.610576] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
  437. [ 1.626369] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
  438. [ 1.626606] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  439. [ 1.626667] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  440. [ 1.626721] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
  441. [ 1.626772] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  442. [ 1.626819] usb usb1: SerialNumber: ff500000.usb
  443. [ 1.628220] hub 1-0:1.0: USB hub found
  444. [ 1.628302] hub 1-0:1.0: 1 port detected
  445. [ 1.655904] ehci_rk_probe ok
  446. [ 1.656366] usbcore: registered new interface driver cdc_acm
  447. [ 1.656414] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  448. [ 1.656601] usbcore: registered new interface driver usblp
  449. [ 1.656743] usbcore: registered new interface driver cdc_wdm
  450. [ 1.656947] usbcore: registered new interface driver usb-storage
  451. [ 1.657081] usbcore: registered new interface driver ums-alauda
  452. [ 1.657208] usbcore: registered new interface driver ums-cypress
  453. [ 1.657348] usbcore: registered new interface driver ums-datafab
  454. [ 1.657476] usbcore: registered new interface driver ums_eneub6250
  455. [ 1.657601] usbcore: registered new interface driver ums-freecom
  456. [ 1.657725] usbcore: registered new interface driver ums-isd200
  457. [ 1.657849] usbcore: registered new interface driver ums-jumpshot
  458. [ 1.657974] usbcore: registered new interface driver ums-karma
  459. [ 1.658099] usbcore: registered new interface driver ums-onetouch
  460. [ 1.658226] usbcore: registered new interface driver ums-sddr09
  461. [ 1.658353] usbcore: registered new interface driver ums-sddr55
  462. [ 1.658478] usbcore: registered new interface driver ums-usbat
  463. [ 1.658769] usbcore: registered new interface driver usbserial
  464. [ 1.658903] usbcore: registered new interface driver usbserial_generic
  465. [ 1.659017] usbserial: USB Serial support registered for generic
  466. [ 1.659150] usbcore: registered new interface driver option
  467. [ 1.659259] usbserial: USB Serial support registered for GSM modem (1-port)
  468. [ 1.659494] usbcore: registered new interface driver trancevibrator
  469. [ 1.659537] usb20_otg: version 3.10a 21-DEC-2012
  470. [ 1.660660] f1a80040
  471. [ 1.660711] Core Release: 3.10a
  472. [ 1.660751] Setting default values for core params
  473. [ 1.661175] Using Buffer DMA mode
  474. [ 1.661218] Periodic Transfer Interrupt Enhancement - disabled
  475. [ 1.661257] Multiprocessor Interrupt Enhancement - disabled
  476. [ 1.661298] OTG VER PARAM: 0, OTG VER FLAG: 0
  477. [ 1.661334] ^^^^^^^^^^^^^^^^^Device Mode
  478. [ 1.661379] Dedicated Tx FIFOs mode
  479. [ 1.661439] pcd_init otg_dev = ed946dc0
  480. [ 1.661967] usb20_otg ff580000.usb: DWC OTG Controller
  481. [ 1.662067] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
  482. [ 1.662173] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
  483. [ 1.662359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  484. [ 1.662419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  485. [ 1.662471] usb usb2: Product: DWC OTG Controller
  486. [ 1.662517] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  487. [ 1.662564] usb usb2: SerialNumber: ff580000.usb
  488. [ 1.663872] hub 2-0:1.0: USB hub found
  489. [ 1.663951] hub 2-0:1.0: 1 port detected
  490. [ 1.664876] usb20_host: version 3.10a 21-DEC-2012
  491. [ 1.668406] f1b00040
  492. [ 1.668454] Core Release: 3.10a
  493. [ 1.668492] Setting default values for core params
  494. [ 1.668897] Using Buffer DMA mode
  495. [ 1.668938] Periodic Transfer Interrupt Enhancement - disabled
  496. [ 1.668978] Multiprocessor Interrupt Enhancement - disabled
  497. [ 1.669019] OTG VER PARAM: 0, OTG VER FLAG: 0
  498. [ 1.669054] ^^^^^^^^^^^^^^^^^^Host Mode
  499. [ 1.669156] usb20_host ff540000.usb: DWC OTG Controller
  500. [ 1.669246] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
  501. [ 1.669349] usb20_host ff540000.usb: irq 57, io mem 0x00000000
  502. [ 1.669512] Init: Power Port (0)
  503. [ 1.669695] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  504. [ 1.669754] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  505. [ 1.669806] usb usb3: Product: DWC OTG Controller
  506. [ 1.669851] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  507. [ 1.669898] usb usb3: SerialNumber: ff540000.usb
  508. [ 1.671199] hub 3-0:1.0: USB hub found
  509. [ 1.671277] hub 3-0:1.0: 1 port detected
  510. [ 1.672908] .. rk pwm remotectl v1.0 init
  511. [ 1.673158] remotectl probe j=0x0
  512. [ 1.673688] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
  513. [ 1.674268] pwm enable val=0x646205
  514. [ 1.675151] usbcore: registered new interface driver xpad
  515. [ 1.675317] usbcore: registered new interface driver usb_acecad
  516. [ 1.675526] usbcore: registered new interface driver aiptek
  517. [ 1.675684] usbcore: registered new interface driver gtco
  518. [ 1.675853] usbcore: registered new interface driver hanwang
  519. [ 1.676004] usbcore: registered new interface driver kbtab
  520. [ 1.676171] usbcore: registered new interface driver wacom
  521. [ 1.677236] sensor_register_slave:mma8452,id=17
  522. [ 1.677286] sensor_register_slave:cm3217,id=44
  523. [ 1.677326] sensor_register_slave:cm3218,id=45
  524. [ 1.683805] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
  525. [ 1.683986] i2c /dev entries driver
  526. [ 1.686225] IR NEC protocol handler initialized
  527. [ 1.686274] IR RC5(x) protocol handler initialized
  528. [ 1.686311] IR RC6 protocol handler initialized
  529. [ 1.686345] IR JVC protocol handler initialized
  530. [ 1.686380] IR Sony protocol handler initialized
  531. [ 1.686415] IR RC5 (streamzap) protocol handler initialized
  532. [ 1.686451] IR SANYO protocol handler initialized
  533. [ 1.686486] IR MCE Keyboard/mouse protocol handler initialized
  534. [ 1.686742] usbcore: registered new interface driver uvcvideo
  535. [ 1.686783] USB Video Class driver (1.1.1)
  536. [ 1.686828] CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
  537. [ 1.690053] D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
  538. [ 1.690140] D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
  539. [ 1.690206] D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
  540. [ 1.690269] D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
  541. [ 1.690483] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
  542. [ 1.690958] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xf19b0000 size: 0x4000)
  543. [ 1.693059] D1:camsys_platform_probe(1208): ff910000.isp memory:
  544. [ 1.693124] D1:camsys_platform_probe(1218): Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
  545. [ 1.693184] D1:camsys_platform_probe(1213): I2c memory (phy: 0x2d9f4000 vir: 0xed9f4000 size: 0x1000)
  546. [ 1.693237] D1:camsys_platform_probe(1233): Probe ff910000.isp device success
  547. [ 1.696252] device-mapper: uevent: version 1.0.3
  548. [ 1.697004] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  549. [ 1.697947] Bluetooth: HCI UART driver ver 2.2
  550. [ 1.697997] Bluetooth: HCI H4 protocol initialized
  551. [ 1.698035] Bluetooth: HCILL protocol initialized
  552. [ 1.703800] cpufreq version 1.0, suspend freq 1200 MHz
  553. [ 1.704383] cpuidle: using governor ladder
  554. [ 1.704429] cpuidle: using governor menu
  555. [ 1.704549] Synopsys Designware Multimedia Card Interface Driver
  556. [ 1.705362] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
  557. [ 1.706172] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
  558. [ 1.706692] 3230..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
  559. [ 1.706751] Line3235..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
  560. [ 1.707129] 1357..dw_mci_set_ios: no card. [mmc0]
  561. [ 1.724704] 1357..dw_mci_set_ios: no card. [mmc0]
  562. [ 1.744413] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
  563. [ 1.744465] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
  564. [ 1.744492] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
  565. [ 1.744851] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
  566. [ 1.745593] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
  567. [ 1.745793] 3224..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
  568. [ 1.746314] 1357..dw_mci_set_ios: no card. [mmc1]
  569. [ 1.764057] 1357..dw_mci_set_ios: no card. [mmc1]
  570. [ 1.776538] mmc0: BKOPS_EN bit is not set
  571. [ 1.778444] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
  572. [ 1.780747] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
  573. [ 1.780775] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
  574. [ 1.783878] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
  575. [ 1.783898] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
  576. [ 1.784256] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
  577. [ 1.784494] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
  578. [ 1.784642] 3230..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
  579. [ 1.784758] 1357..dw_mci_set_ios: no card. [mmc2]
  580. [ 1.795808] rk_sdmmc: BOOT
  581. [ 1.795808] execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_INVALID SDMMC_SHIFT_DEGREE_INVALID[mmc0]
  582. [ 1.795912] mmc0: new HS200 MMC card at address 0001
  583. [ 1.796177] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
  584. [ 1.796493] uboot: 0x000400000 -- 0x000800000 (4 MB)
  585. [ 1.796506] misc: 0x000800000 -- 0x000c00000 (4 MB)
  586. [ 1.796515] resource: 0x000c00000 -- 0x001c00000 (16 MB)
  587. [ 1.796525] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
  588. [ 1.796533] boot: 0x002c00000 -- 0x004c00000 (32 MB)
  589. [ 1.796542] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
  590. [ 1.796551] backup: 0x006c00000 -- 0x00a000000 (52 MB)
  591. [ 1.796559] cache: 0x00a000000 -- 0x012000000 (128 MB)
  592. [ 1.796568] kpanic: 0x012000000 -- 0x012400000 (4 MB)
  593. [ 1.796577] system: 0x012400000 -- 0x042400000 (768 MB)
  594. [ 1.796585] metadata: 0x042400000 -- 0x042800000 (4 MB)
  595. [ 1.796594] userdata: 0x042800000 -- 0x082800000 (1024 MB)
  596. [ 1.796603] linuxroot: 0x082800000 -- 0x146800000 (3136 MB)
  597. [ 1.796611] user: 0x146800000 -- 0x3a3a00000 (9682 MB)
  598. [ 1.796642] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141357..dw_mci_set_ios: no card. [mmc1]
  599. [ 1.803394] 1357..dw_mci_set_ios: no card. [mmc2]
  600. [ 1.823084] 1357..dw_mci_set_ios: no card. [mmc2]
  601. [ 1.823298] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
  602. [ 1.823312] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
  603. [ 1.823562] leds-gpio leds.31: pins are not configured from the driver
  604. [ 1.823787] hidraw: raw HID events driver (C) Jiri Kosina
  605. [ 1.825077] usbcore: registered new interface driver usbhid
  606. [ 1.825087] usbhid: USB HID core driver
  607. [ 1.825392] ashmem: initialized
  608. [ 1.825491] logger: created 256K log 'log_main'
  609. [ 1.825580] logger: created 256K log 'log_events'
  610. [ 1.825671] logger: created 256K log 'log_radio'
  611. [ 1.825765] logger: created 256K log 'log_system'
  612. [ 1.826756] input: rk29-keypad as /devices/ff100000.adc/key.34/input/input1
  613. [ 1.827335] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ftrace; cannot claim for 2-0010
  614. [ 1.827351] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
  615. [ 1.827363] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
  616. [ 1.827374] ES8323 2-0010: Error applying setting, reverse things back
  617. [ 1.827659] es8323 probe i2c recv ok
  618. [ 1.827875] i2c-core: driver [ES8323] using legacy suspend method
  619. [ 1.827886] i2c-core: driver [ES8323] using legacy resume method
  620. [ 1.828196] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  621. [ 1.828225] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  622. [ 1.828243] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  623. [ 1.828473] es8323_probe
  624. [ 1.828561] es8323_probe:register ISR (irq=194)
  625. [ 2.463038] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
  626. [ 2.463051] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
  627. [ 2.463062] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
  628. [ 2.463070] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
  629. [ 2.463080] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
  630. [ 2.463088] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
  631. [ 2.463098] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
  632. [ 2.463106] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
  633. [ 2.463116] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
  634. [ 2.463124] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
  635. [ 2.463133] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
  636. [ 2.463141] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
  637. [ 2.463151] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
  638. [ 2.463159] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
  639. [ 2.463168] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
  640. [ 2.463175] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
  641. [ 2.463184] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
  642. [ 2.463192] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
  643. [ 2.463201] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
  644. [ 2.463208] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
  645. [ 2.463217] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
  646. [ 2.463224] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
  647. [ 2.463233] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
  648. [ 2.463241] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
  649. [ 2.463251] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
  650. [ 2.463259] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
  651. [ 2.463267] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
  652. [ 2.463275] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
  653. [ 2.463284] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
  654. [ 2.463291] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
  655. [ 2.463300] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
  656. [ 2.463307] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
  657. [ 2.463327] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
  658. [ 2.463335] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
  659. [ 2.463343] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
  660. [ 2.463351] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
  661. [ 2.463360] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
  662. [ 2.463368] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
  663. [ 2.463377] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
  664. [ 2.463385] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
  665. [ 2.463393] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
  666. [ 2.463401] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
  667. [ 2.463410] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
  668. [ 2.463418] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
  669. [ 2.463541] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
  670. [ 2.463553] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
  671. [ 2.463563] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
  672. [ 2.463575] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
  673. [ 2.463601] ES8323 2-0010: ASoC: mux Differential Mux has no paths
  674. [ 2.466511] Enter::rk29_es8323_init----135
  675. [ 2.469797] rockchip-es8323 rockchip-es8323.29: ES8323 HiFi <-> rockchip-i2s.0 mapping ok
  676. [ 2.470333] u32 classifier
  677. [ 2.470340] Actions configured
  678. [ 2.470352] Netfilter messages via NETLINK v0.30.
  679. [ 2.470405] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  680. [ 2.470694] ctnetlink v0.93: registering with nfnetlink.
  681. [ 2.470754] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  682. [ 2.470761] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  683. [ 2.470984] xt_time: kernel timezone is -0000
  684. [ 2.471154] ip_tables: (C) 2000-2006 Netfilter Core Team
  685. [ 2.471264] arp_tables: (C) 2002 David S. Miller
  686. [ 2.471303] TCP: cubic registered
  687. [ 2.471309] Initializing XFRM netlink socket
  688. [ 2.471486] NET: Registered protocol family 10
  689. [ 2.471921] mip6: Mobile IPv6
  690. [ 2.471943] ip6_tables: (C) 2000-2006 Netfilter Core Team
  691. [ 2.472042] sit: IPv6 over IPv4 tunneling driver
  692. [ 2.472328] NET: Registered protocol family 17
  693. [ 2.472349] NET: Registered protocol family 15
  694. [ 2.472393] Bridge firewalling registered
  695. [ 2.472404] Ebtables v2.0 registered
  696. [ 2.472580] Bluetooth: RFCOMM TTY layer initialized
  697. [ 2.472604] Bluetooth: RFCOMM socket layer initialized
  698. [ 2.472611] Bluetooth: RFCOMM ver 1.11
  699. [ 2.472618] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  700. [ 2.472624] Bluetooth: BNEP filters: protocol multicast
  701. [ 2.472634] Bluetooth: BNEP socket layer initialized
  702. [ 2.472641] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  703. [ 2.472650] Bluetooth: HIDP socket layer initialized
  704. [ 2.472673] l2tp_core: L2TP core driver, V2.0
  705. [ 2.472685] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  706. [ 2.472691] [WLAN_RFKILL]: Enter rfkill_wlan_init
  707. [ 2.472890] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  708. [ 2.472900] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
  709. [ 2.472907] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  710. [ 2.472916] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
  711. [ 2.472923] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  712. [ 2.472943] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
  713. [ 2.472962] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
  714. [ 2.472969] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  715. [ 2.472994] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
  716. [ 2.473032] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  717. [ 2.473078] [BT_RFKILL]: Enter rfkill_rk_init
  718. [ 2.473189] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
  719. [ 2.473204] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
  720. [ 2.473217] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
  721. [ 2.473230] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
  722. [ 2.473242] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
  723. [ 2.473286] [BT_RFKILL]: Request irq for bt wakeup host
  724. [ 2.473377] [BT_RFKILL]: ** disable irq
  725. [ 2.473450] [BT_RFKILL]: ap6335 device registered.
  726. [ 3.102273] ******** Show Sink Info ********
  727. [ 3.102285] Max tmds clk is 0
  728. [ 3.102290] Support video mode:
  729. [ 3.102296] 1920x1080p@60Hz
  730. [ 3.102300] 1280x720p@60Hz
  731. [ 3.102305] 720x480p@60Hz
  732. [ 3.102310] Support video color mode:
  733. [ 3.102315] RGB
  734. [ 3.102319] YCbCr422
  735. [ 3.102323] YCbCr444
  736. [ 3.102327] Support video color depth:
  737. [ 3.102332] 24bit
  738. [ 3.102336] Support audio type:
  739. [ 3.102341] LPCM
  740. [ 3.102346] Support max audio channel is 2
  741. [ 3.102351] Support audio sample rate:
  742. [ 3.102355] 32000
  743. [ 3.102359] 44100
  744. [ 3.102363] 48000
  745. [ 3.102367] Support audio word lenght:
  746. [ 3.102372] 16bit
  747. [ 3.102376] 20bit
  748. [ 3.102379] 24bit
  749. [ 3.102383]
  750. [ 3.102387] ******** Show Sink Info ********
  751. [ 3.102402]
  752. [ 3.102402] rk_fb_switch_screen lcdc_id 0 type 6 enable 1
  753. [ 3.102415] fb0 win id 1 state 1
  754. [ 3.102435] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  755. [ 3.102458] fb1 win id 0 state 0
  756. [ 3.102465] fb2 win id 2 state 0
  757. [ 3.102470] fb3 win id 3 state 0
  758. [ 3.102476] fb4 win id 4 state 0
  759. [ 3.102481]
  760. [ 3.102481] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
  761. [ 3.102481]
  762. [ 3.102497] pixel clk is 148500000 tmds clk is 148500000
  763. [ 3.102537] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
  764. [ 3.260085] phy_int 0x3d i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x02
  765. [ 3.260095] phy_stat is 0xf3 phy_pol 0xf3 phy_int 0x02
  766. [ 3.260095]
  767. [ 3.260105] new phy pol is 0xfd cur pol is 0xf1
  768. [ 3.260105]
  769. [ 3.260113] audio int is 0x02
  770. [ 3.260122] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
  771. [ 3.260510] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  772. [ 3.260527] rk3288_init_suspend
  773. [ 3.260534] rk3288_suspend_init enter
  774. [ 3.260670] rk3288_suspend_init: pm_ctrbits =40017
  775. [ 3.260706] gpio_get_dts_info suspend:8
  776. [ 3.260713] gpio_get_dts_info resume:8
  777. [ 3.260718] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  778. [ 3.260744] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  779. [ 3.260869] clks_gating_suspend_init:clkgt info ok
  780. [ 3.260946] Registering SWP/SWPB emulation handler
  781. [ 3.261246] ddrfreq: verion 1.2 20140526
  782. [ 3.261257] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
  783. [ 3.261265] ddrfreq: auto-freq=0
  784. [ 3.261272] ddrfreq: auto-freq-table[0] 240MHz
  785. [ 3.261278] ddrfreq: auto-freq-table[1] 324MHz
  786. [ 3.261284] ddrfreq: auto-freq-table[2] 456MHz
  787. [ 3.261289] ddrfreq: auto-freq-table[3] 528MHz
  788. [ 3.262913] act_ldo3: operation not allowed
  789. [ 3.263151] vga_edid_probe: turn on ldo3 done.
  790. [ 3.263185] act_ldo4: operation not allowed
  791. [ 3.263413] vga_edid_probe: turn on ldo done.
  792. [ 3.263440] act_ldo2: operation not allowed
  793. [ 3.263667] vga_edid_probe: turn on ldo2 done.
  794. [ 3.263687] act_ldo8: operation not allowed
  795. [ 3.263914] vga_edid_probe: turn on ldo done.
  796. [ 3.268955] unable to read EDID block.
  797. [ 3.303500] unable to read EDID block.
  798. [ 3.338046] unable to read EDID block.
  799. [ 3.338055] vga-ddc: read and parse edid failed errno:-5.
  800. [ 3.338061] vga_edid_probe: success. 10
  801. [ 3.338159] firefly_vga_get_enable 180, 0
  802. [ 3.338165] firefly_vga_get_status 186
  803. [ 3.338171] firefly_vga_set_enable 159 enable:0
  804. [ 3.338214] regulator-dummy: disabling
  805. [ 3.338497] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  806. [ 3.338521] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  807. [ 3.338535] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  808. [ 3.338620] pcd_pullup, is_on 0
  809. [ 3.338653] file system registered
  810. [ 3.339166] android_usb gadget: Mass Storage Function, version: 2009/09/11
  811. [ 3.339175] android_usb gadget: Number of LUNs=2
  812. [ 3.339182] lun0: LUN: removable file: (no medium)
  813. [ 3.339189] lun1: LUN: removable file: (no medium)
  814. [ 3.339299] android_usb gadget: android_usb ready
  815. [ 3.339367] sensor_init: Probe name sensors
  816. [ 3.339382] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
  817. [ 3.339904] rtc_hym8563 0-0051: setting system clock to 2011-01-01 13:00:29 UTC (1293886829)
  818. [ 3.345173] usbcore: registered new interface driver snd-usb-audio
  819. [ 3.345185] ALSA device list:
  820. [ 3.345190] #0: RK_ES8323
  821. [ 3.346446] Freeing unused kernel memory: 2364K (c0a77000 - c0cc6000)
  822. [ 3.346767] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
  823. [ 3.350937] SELinux: Permission attach_queue in class tun_socket not defined in policy.
  824. [ 3.350949] SELinux: the above unknown classes and permissions will be denied
  825. [ 3.567699] type=1403 audit(1293886829.720:2): policy loaded auid=4294967295 ses=4294967295
  826. [ 3.567795] SELinux: Loaded policy from /sepolicy
  827. [ 3.569215] type=1404 audit(1293886829.720:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  828. [ 3.643451] dwc_otg_hcd_enable, enable host controller
  829. [ 3.746810] Using Buffer DMA mode
  830. [ 3.746817] Periodic Transfer Interrupt Enhancement - disabled
  831. [ 3.746823] Multiprocessor Interrupt Enhancement - disabled
  832. [ 3.746830] OTG VER PARAM: 0, OTG VER FLAG: 0
  833. [ 3.746835] ^^^^^^^^^^^^^^^^^^Host Mode
  834. [ 3.791146] Init: Power Port (0)
  835. [ 4.174851] Indeed it is in host mode hprt0 = 00021501
  836. [ 4.351969] usb 3-1: new high-speed USB device number 2 using usb20_host
  837. [ 4.352037] Indeed it is in host mode hprt0 = 00001101
  838. [ 4.498149] init: init.rk30board.bootmode.emmc.rc: 8: invalid command '/devices/ff0f0000.rksdmmc/mmc_host/mmc'
  839. [ 4.498168] init: init.rk30board.bootmode.emmc.rc: 9: invalid command '/devices/ff0c0000.rksdmmc/mmc_host/mmc'
  840. [ 4.498180] init: init.rk30board.bootmode.emmc.rc: 10: invalid command '/devices/ff580000.usb'
  841. [ 4.498191] init: init.rk30board.bootmode.emmc.rc: 11: invalid command '/devices/ff580000.usb'
  842. [ 4.498201] init: init.rk30board.bootmode.emmc.rc: 12: invalid command '/devices/ff500000.usb'
  843. [ 4.498211] init: init.rk30board.bootmode.emmc.rc: 13: invalid command '/devices/ff500000.usb'
  844. [ 4.498220] init: init.rk30board.bootmode.emmc.rc: 14: invalid command '/devices/ff540000.usb'
  845. [ 4.498229] init: init.rk30board.bootmode.emmc.rc: 15: invalid command '/devices/ff540000.usb'
  846. [ 4.498515] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  847. [ 4.548966] init: /dev/hw_random not found
  848. [ 4.548998] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
  849. [ 4.549008] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  850. [ 4.549016] usb 3-1: Product: USB 2.0 Hub [MTT]
  851. [ 4.549025] keychord: using input dev ff680000.pwm for fevent
  852. [ 4.549034] keychord: using input dev rk29-keypad for fevent
  853. [ 4.549378] hub 3-1:1.0: USB hub found
  854. [ 4.549439] hub 3-1:1.0: 4 ports detected
  855. [ 4.554026] fs_mgr: parse_link_device : path = NULL
  856. [ 4.554049] fs_mgr: parse_link_device : path = NULL
  857. [ 4.554066] fs_mgr: parse_link_device : path = NULL
  858. [ 4.554081] fs_mgr: parse_link_device : path = NULL
  859. [ 4.554096] fs_mgr: parse_link_device : path = NULL
  860. [ 4.554111] fs_mgr: parse_link_device : path = NULL
  861. [ 4.554127] fs_mgr: parse_link_device : path = NULL
  862. [ 4.554142] fs_mgr: parse_link_device : path = NULL
  863. [ 4.554193] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
  864. [ 4.555010] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long. Nothing to do!resize2fs:
  865. [ 4.560873] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  866. [ 4.564157] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  867. [ 4.566331] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  868. [ 4.570469] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  869. [ 4.575385] drmboot: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  870. [ 4.580494] mali pd enabled
  871. [ 4.580507] clk enabled
  872. [ 4.580517] MALI_DVFS_STEP=4,div_dvfs=10
  873. [ 4.580523] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
  874. [ 4.580530] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
  875. [ 4.580537] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
  876. [ 4.580544] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,msxell@rshol8:/ $
  877. [ 4.580632] turn on mali power
  878. [ 4.580652] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
  879. [ 4.580998] mali ffa30000.gpu: Probed as mali0
  880. [ 4.583284] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  881. [ 4.593818] init: /dev/hw_random not found
  882. [ 4.600629] binder: 134:134 transaction failed 29189, size 0-0
  883. [ 4.601191] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  884. [ 4.603557] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
  885. [ 4.605067] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  886. [ 4.606578] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
  887. [ 4.606949] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
  888. [ 4.610728] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  889. [ 4.610745] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  890. [ 4.610896] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  891. [ 4.691079] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  892. [ 4.757757] fs_mgr: parse_link_device : path = NULL
  893. [ 4.757785] fs_mgr: parse_link_device : path = NULL
  894. [ 4.757802] fs_mgr: parse_link_device : path = NULL
  895. [ 4.757819] fs_mgr: parse_link_device : path = NULL
  896. [ 4.757839] fs_mgr: parse_link_device : path = NULL
  897. [ 4.757856] fs_mgr: parse_link_device : path = NULL
  898. [ 4.757885] fs_mgr: parse_link_device : path = NULL
  899. [ 4.757903] fs_mgr: parse_link_device : path = NULL
  900. [ 4.787964] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  901. [ 4.787981] init: powerctl: cannot expand '${sys.powerctl}'
  902. [ 4.787999] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  903. [ 4.788011] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  904. [ 4.788317] firefly_vga_get_enable 180, 0
  905. [ 4.788375] firefly_vga_get_status 186
  906. [ 4.788658] android_usb: already disabled
  907. [ 4.790827] firefly_vga_set_enable 159 enable:0
  908. [ 4.791629] read descriptors
  909. [ 4.791643] read strings
  910. [ 4.791676] pcd_pullup, is_on 1
  911. [ 5.513099] iep dpi mode inactivity
  912. [ 5.582414] rk3288-lcdc lcdc0: blank mode:0
  913. [ 5.662043] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_hal.ver
  914. [ 5.664204] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_trace
  915. [ 5.664328] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_camboard.ver
  916. [ 5.664452] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_libisp.ver
  917. [ 5.664562] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_isi.ver
  918. [ 5.668529] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  919. [ 5.668544] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
  920. [ 5.668555] D1:camsys_open(710): camsys_marvin(ed9e2510) is opened!
  921. [ 5.668616] D1:camsys_extdev_register(226): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
  922. [ 5.668634] D1:camsys_extdev_register(226): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
  923. [ 5.668648] D1:camsys_extdev_register(226): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
  924. [ 5.668681] rockchip_gpio_request:GPIO7-13
  925. [ 5.668694] rockchip_gpio_set:GPIO7-13 level = 1
  926. [ 5.668707] rockchip_gpio_direction_output:set GPIO7-13 level 1
  927. [ 5.668719] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
  928. [ 5.668730] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x207600,result=0x207600
  929. [ 5.668741] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
  930. [ 5.668764] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000400,result=0x400
  931. [ 5.668775] _rockchip_pinconf_set:GPIO7-13,group=isp_flash_trigger, function=isp_pin, type=3
  932. [ 5.668785] rk3288_calc_drv_reg_and_bit:GPIO7-13, drv_reg=0x74, bit=10
  933. [ 5.668795] _rockchip_pinconf_set:GPIO-7 13 data=0xc000000,type=3
  934. [ 5.668805] D1:camsys_extdev_register(248): Extdev(dev_id: 0x2000000) register success
  935. [ 5.673886] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
  936. [ 5.673910] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
  937. [ 5.674018] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
  938. [ 5.674057] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
  939. [ 5.675128] D1:camsys_sysctl_extdev(326): Sysctl 11 success, gpio(11) set 1
  940. [ 5.676192] D1:camsys_sysctl_extdev(330): Sysctl 8 success, gpio(79) set 1
  941. [ 5.677255] D1:camsys_sysctl_extdev(330): Sysctl 7 success, gpio(78) set 1
  942. [ 5.680526] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
  943. [ 5.681786] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
  944. [ 5.681848] D1:camsys_sysctl_extdev(326): Sysctl 7 success, gpio(78) set 0
  945. [ 5.681863] D1:camsys_sysctl_extdev(326): Sysctl 8 success, gpio(79) set 0
  946. [ 5.681883] D1:camsys_sysctl_extdev(330): Sysctl 11 success, gpio(11) set 0
  947. [ 5.682990] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
  948. [ 5.683024] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
  949. [ 5.685098] D1:camsys_extdev_deregister(308): Extdev(dev_id: 0x2000000) is deregister success
  950. [ 5.685119] D1:camsys_irq_disconnect(635): All thread disconnect camsys_marvin irq success!
  951. [ 5.685133] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  952. [ 5.685143] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
  953. [ 5.685152] D1:camsys_release(734): camsys_marvin(ed9e2510) is closed
  954. [ 5.698576] init: sys_prop: permission denied uid:1003 name:sys.gmali.version
  955. [ 5.847569] Enter::rk29_hw_params----52
  956. [ 5.848526] Enter:rk29_hw_params, 86, rate=44100
  957. [ 5.848537] Enter:rk29_hw_params, 104, LRCK=64
  958. [ 6.159908] Enter::rk29_hw_params----52
  959. [ 6.160916] Enter:rk29_hw_params, 86, rate=44100
  960. [ 6.160930] Enter:rk29_hw_params, 104, LRCK=64
  961. [ 8.764003] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  962. [ 9.754474] es8323_mic_state_ctrl read: 0
  963. [ 9.754497] mic_state_switch 0
  964. [ 9.754507] hp_det = 0,insert hp
  965. [ 9.754513] hp mic use intern
  966. [ 10.469907] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
  967. [ 10.469933] lowmemorykiller: oom_adj 0 => oom_score_adj 0
  968. [ 10.469942] lowmemorykiller: oom_adj 1 => oom_score_adj 58
  969. [ 10.469950] lowmemorykiller: oom_adj 2 => oom_score_adj 117
  970. [ 10.469958] lowmemorykiller: oom_adj 3 => oom_score_adj 176
  971. [ 10.469965] lowmemorykiller: oom_adj 9 => oom_score_adj 529
  972. [ 10.469972] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
  973. [ 10.683822] phy_power_on: enable = 1
  974. [ 10.718310] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
  975. [ 10.718351] eth0: device MAC address **:**:**:**:**:**
  976. [ 10.722506] libphy: stmmac: probed
  977. [ 10.722520] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
  978. [ 10.722530] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
  979. [ 10.867904] wifi_driver_write: wifi driver already rmmod
  980. [ 11.055271] acc_open
  981. [ 11.055304] acc_release
  982. [ 12.421876] init: no such service 'fuse_internal_sd'
  983. [ 12.944728] init: sys_prop: permission denied uid:1001 name:media.cfg.audio.soundeffect
  984. [ 13.149200] init: sys_prop: permission denied uid:10007 name:sys.gmali.version
  985. [ 13.298366] vpu_service: power on
  986. [ 13.298435] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
  987. [ 13.734766] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  988. [ 17.242362] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
  989. [ 17.242385] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e27f000
  990. [ 17.242396] vpu_service: power off...
  991. [ 17.242431] done
  992.  
  993.  
  994. shell@rk3288:/ $ reboot recovery
  995.  
  996. [ 65.975401] SysRq : Emergency Remount R/O
  997. [ 65.980745] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
  998. [ 65.981803] EXT4-fs (mmcblk0p11): re-mounted. Opts: (null)
  999. [ 65.984899] EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
  1000. [ 65.990511] Emergency Remount complete
  1001. [ 66.088372] cpufreq: reboot set core rate=1200000000, volt=1100000
  1002. [ 66.088567] mmcblk mmc0:0001: Unbalanced pm_runtime_enable!
  1003. [ 66.699327] Chenzy-------hkw-------es8323_i2c_shutdown
  1004. [ 66.805372] dwc_otg_driver_shutdown: disconnect USB device mode
  1005. [ 66.813241] Restarting system with command 'recovery'.
  1006. DDR Version 1.00 20141007
  1007. In
  1008. SRX
  1009. Channel a: DDR3 200MHz
  1010. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  1011. Channel b: DDR3 200MHz
  1012. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  1013. OUT
  1014.  
  1015.  
  1016. U-Boot 2014.10-RK3288-02 (Nov 26 2014 - 09:28:44)
  1017.  
  1018. CPU: rk3288
  1019. CPU's clock information:
  1020. arm pll = 600000000HZ
  1021. periph pll = 300000000HZ
  1022. ddr pll = 200000000HZ
  1023. codec pll = 594000000HZ
  1024. Board: Rockchip platform Board
  1025. DRAM: Found dram banks:1
  1026. Adding bank:0000000000000000(0000000080000000)
  1027. 128 MiB
  1028. storage init OK!
  1029. Using default environment
  1030.  
  1031. GetParam
  1032. check parameter success
  1033. Unknow param: MACHINE_MODEL:rk30sdk!
  1034. Unknow param: MACHINE_ID:007!
  1035. Unknow param: MANUFACTURER:RK30SDK!
  1036. Unknow param: PWR_HLD: 0,0,A,0,1!
  1037. failed to prepare fdt from boot!
  1038. power key: bank-0 pin-5
  1039. can't find dts node for ricoh619
  1040. pmic:act8846
  1041. Can't find dts node for fuel guage cw201x
  1042. SecureBootEn = 0, SecureBootLock = 0
  1043.  
  1044. #Boot ver: 2014-11-26#2.17
  1045. sn:****************
  1046. unknown reboot type 1
  1047. no fuel gauge found
  1048. no fuel gauge found
  1049. read logo_on switch from dts [0]
  1050. no fuel gauge found
  1051. failed to load fdt from recovery!
  1052. kernel @ 0x02000000 (0x00608530)
  1053. ramdisk @ 0x04bf0000 (0x00275b8f)
  1054. Secure Boot state: 0
  1055. bootrk: do_bootm_linux...
  1056. Loading Device Tree to 0480c000, end 04827184 ... OK
  1057. Add bank:0000000000000000, 0000000080000000
  1058.  
  1059. Starting kernel ...
  1060.  
  1061. <hit enter to activate fiq debugger>
  1062. [ 0.000000] Booting Linux on physical CPU 0x500
  1063. [ 0.000000] Initializing cgroup subsys cpu
  1064. [ 0.000000] Initializing cgroup subsys cpuacct
  1065. [ 0.000000] Linux version 3.10.0 (dujw@tchipserver2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #63 SMP PREEMPT Thu Dec 11 17:22:26 CST 2014
  1066. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  1067. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1068. [ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
  1069. [ 0.000000] hdmi init vic is -1
  1070. [ 0.000000] rockchip_ion_reserve
  1071. [ 0.000000] cma: CMA: reserved 16 MiB at 2e800000
  1072. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  1073. [ 0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
  1074. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1ed4000 s14016 r8192 d14656 u36864
  1075. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
  1076. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00620000@0x00414000(linuxroot),-@0x00a34000(user) storagemedia=emmc loader.timestamp=2014-11-26_09:28:44 hdmi.vic=-1 androidboot.serialno=****************
  1077. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  1078. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1079. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1080. [ 0.000000] Memory: 2048MB = 2048MB total
  1081. [ 0.000000] Memory: 2045600k/2045600k available, 51552k reserved, 1318912K highmem
  1082. [ 0.000000] Virtual kernel memory layout:
  1083. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1084. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  1085. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  1086. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  1087. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1088. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  1089. [ 0.000000] .text : 0xc0008000 - 0xc0a8e640 (10778 kB)
  1090. [ 0.000000] .init : 0xc0a8f000 - 0xc0cde6c0 (2366 kB)
  1091. [ 0.000000] .data : 0xc0ce0000 - 0xc0d7f488 ( 638 kB)
  1092. [ 0.000000] .bss : 0xc0d7f488 - 0xc0e9c644 (1141 kB)
  1093. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  1094. [ 0.000000] Preemptible hierarchical RCU implementation.
  1095. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  1096. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  1097. [ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
  1098. [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
  1099. [ 0.000000] rkclk_init_clks: cnt_parent = 7
  1100. [ 0.000000] rkclk_init_clks: cnt_rate = 32
  1101. [ 0.000000] Architected local timer running at 24.00MHz (phys).
  1102. [ 0.000000] Switching to timer-based delay loop
  1103. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  1104. [ 0.000000] process version: 0
  1105. [ 0.000000] channel:0, lkg:0
  1106. [ 0.000000] target-temp:95
  1107. [ 0.000000] channel:2, lkg:0
  1108. [ 0.000000] target-temp:95
  1109. [ 0.000000] channel:0, lkg:0
  1110. [ 0.000000] target-temp:95
  1111. [ 0.000000] channel:1, lkg:0
  1112. [ 0.000000] target-temp:95
  1113. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  1114. [ 0.000000] Console: colour dummy device 80x30
  1115. [ 0.524382] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  1116. [ 0.524433] pid_max: default: 32768 minimum: 301
  1117. [ 0.524766] Security Framework initialized
  1118. [ 0.524807] SELinux: Initializing.
  1119. [ 0.525040] Mount-cache hash table entries: 512
  1120. [ 0.527090] Initializing cgroup subsys debug
  1121. [ 0.527134] Initializing cgroup subsys freezer
  1122. [ 0.527226] CPU: Testing write buffer coherency: ok
  1123. [ 0.527985] /cpus/cpu@0 missing clock-frequency property
  1124. [ 0.528028] /cpus/cpu@1 missing clock-frequency property
  1125. [ 0.528063] /cpus/cpu@2 missing clock-frequency property
  1126. [ 0.528096] /cpus/cpu@3 missing clock-frequency property
  1127. [ 0.528221] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  1128. [ 0.528332] Setting up static identity map for 0xc079cde8 - 0xc079ce40
  1129. [ 0.532944] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x15ab (version 3.0)
  1130. [ 0.612057] CPU1: Booted secondary processor
  1131. [ 0.612148] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  1132. [ 0.631790] CPU2: Booted secondary processor
  1133. [ 0.631873] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  1134. [ 0.651568] CPU3: Booted secondary processor
  1135. [ 0.651650] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  1136. [ 0.652014] Brought up 4 CPUs
  1137. [ 0.652113] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  1138. [ 0.652144] CPU: All CPU(s) started in SVC mode.
  1139. [ 0.654368] devtmpfs: initialized
  1140. [ 0.672903] pinctrl core: initialized pinctrl subsystem
  1141. [ 0.673649] regulator-dummy: no parameters
  1142. [ 0.675276] NET: Registered protocol family 16
  1143. [ 0.680983] DMA: preallocated 256 KiB pool for atomic coherent allocations
  1144. [ 0.681955] ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0e77c94 (version 0.1)
  1145. [ 0.682485] Registered FIQ tty driver
  1146. [ 0.685994] console [ttyFIQ0] enabled
  1147. [ 0.686554] Registered fiq debugger ttyFIQ0
  1148. [ 0.688830] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
  1149. [ 0.688917] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
  1150. [ 0.689008] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
  1151. [ 0.689083] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
  1152. [ 0.689347] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
  1153. [ 0.689579] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
  1154. [ 0.689802] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
  1155. [ 0.690025] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
  1156. [ 0.690322] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
  1157. [ 0.690555] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
  1158. [ 0.690782] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
  1159. [ 0.691006] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
  1160. [ 0.691245] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
  1161. [ 0.691477] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
  1162. [ 0.691534] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
  1163. [ 0.691586] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
  1164. [ 0.691637] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
  1165. [ 0.693365] rockchip_interrupts_register:bank_num=7
  1166. [ 0.700142] of_get_gpio_init_config:gpio[0] = 256, value = 0
  1167. [ 0.700228] of_get_gpio_init_config:gpio[1] = 233, value = 0
  1168. [ 0.700311] of_get_gpio_init_config:gpio[2] = 136, value = 0
  1169. [ 0.700526] rockchip_pinctrl_probe:init ok
  1170. [ 0.720632] rk_iommu ff900800.iep_mmu: (iep) Enter
  1171. [ 0.720987] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1172. [ 0.721042] rk_iommu ff900800.iep_mmu: (iep) Initialized
  1173. [ 0.721615] rk_iommu ff950800.vip_mmu: (vip) Enter
  1174. [ 0.721939] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1175. [ 0.721993] rk_iommu ff950800.vip_mmu: (vip) Initialized
  1176. [ 0.722543] rk_iommu ff930300.vopb_mmu: (vopb) Enter
  1177. [ 0.722862] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1178. [ 0.722915] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
  1179. [ 0.723482] rk_iommu ff940300.vopl_mmu: (vopl) Enter
  1180. [ 0.723803] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1181. [ 0.723856] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
  1182. [ 0.724426] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
  1183. [ 0.724808] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1184. [ 0.724861] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
  1185. [ 0.725418] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
  1186. [ 0.725755] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1187. [ 0.725808] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
  1188. [ 0.726423] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
  1189. [ 0.726799] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  1190. [ 0.726851] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
  1191. [ 0.732587] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  1192. [ 0.732645] hw-breakpoint: maximum watchpoint size is 4 bytes.
  1193. [ 0.733276] DDR DEBUG: version 1.00 20140603
  1194. [ 0.733359] DDR DEBUG: Channel a:
  1195. [ 0.733394] DDR DEBUG: DDR3 Device
  1196. [ 0.733444] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  1197. [ 0.733485] DDR DEBUG: Channel b:
  1198. [ 0.733517] DDR DEBUG: DDR3 Device
  1199. [ 0.733562] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  1200. [ 0.733607] DDR DEBUG: addr=0xd85000
  1201. [ 0.733646] DDR DEBUG: stride=9, size=256, halfcap=40000000
  1202. [ 0.733687] DDR DEBUG: socAddr[0]=0xd85000, socAddr[1]=0xd85100
  1203. [ 0.733729] DDR DEBUG: chAddr[0]=0xd85000, chAddr[1]=0xd85000
  1204. [ 0.733775] DDR DEBUG: dtar[0]=0x501b0000, dtar[1]=0x501b0000
  1205. [ 0.733934] DDR DEBUG: init success!!! freq=200MHz
  1206. [ 0.733969] DDR DEBUG: Channel a:
  1207. [ 0.734017] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1208. [ 0.734076] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1209. [ 0.734134] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1210. [ 0.734191] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1211. [ 0.734245] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  1212. [ 0.734289] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  1213. [ 0.734328] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  1214. [ 0.734362] DDR DEBUG: Channel b:
  1215. [ 0.734408] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1216. [ 0.734466] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1217. [ 0.734524] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1218. [ 0.734581] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  1219. [ 0.734633] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  1220. [ 0.734675] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  1221. [ 0.734714] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  1222. [ 0.813207] bio: create slab <bio-0> at 0
  1223. [ 0.815066] Enter firefly_noatx8_init
  1224. [ 0.815550] firefly_noatx8_probe 51
  1225. [ 0.816275] SCSI subsystem initialized
  1226. [ 0.816772] usbcore: registered new interface driver usbfs
  1227. [ 0.816923] usbcore: registered new interface driver hub
  1228. [ 0.817204] usbcore: registered new device driver usb
  1229. [ 0.820300] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
  1230. [ 0.824756] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
  1231. [ 0.826240] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
  1232. [ 0.827722] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
  1233. [ 0.828548] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
  1234. [ 0.831519] media: Linux media interface: v0.10
  1235. [ 0.831664] Linux video capture interface: v2.00
  1236. [ 0.831819] pps_core: LinuxPPS API ver. 1 registered
  1237. [ 0.831862] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  1238. [ 0.831945] PTP clock support registered
  1239. [ 0.832390] rockchip_temp_probe,line=362
  1240. [ 0.833177] tsadc ff280000.tsadc: initialized
  1241. [ 0.834412] rockchip_ion_parse_dt: num_heaps = 1
  1242. [ 0.834474] 0: 0 3 vmalloc 0x (null)
  1243. [ 0.835288] Rockchip ion module is successfully loaded (v1.0)
  1244. [ 0.835821] Advanced Linux Sound Architecture Driver Initialized.
  1245. [ 0.837067] Bluetooth: Core ver 2.16
  1246. [ 0.837193] NET: Registered protocol family 31
  1247. [ 0.837236] Bluetooth: HCI device and connection manager initialized
  1248. [ 0.837298] Bluetooth: HCI socket layer initialized
  1249. [ 0.837351] Bluetooth: L2CAP socket layer initialized
  1250. [ 0.837446] Bluetooth: SCO socket layer initialized
  1251. [ 0.838112] cfg80211: Calling CRDA to update world regulatory domain
  1252. [ 0.840488] act8846_i2c_probe,line=898
  1253. [ 0.841907] act8846_parse_dt,line=746
  1254. [ 0.843422] act8846_i2c_probe: act8846_pmic_hold=1
  1255. [ 0.843492] act8846_i2c_probe: act8846_pmic_sleep=1
  1256. [ 0.843550] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
  1257. [ 0.843607] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
  1258. [ 0.846102] act_dcdc1: 1200 mV
  1259. [ 0.849875] vccio: 3300 mV
  1260. [ 0.852495] vdd_logic: 700 <--> 1500 mV at 1125 mV
  1261. [ 0.856235] act_dcdc4: 2000 mV
  1262. [ 0.858118] vccio_sd: 1800 <--> 3300 mV at 3300 mV
  1263. [ 0.861071] act_ldo2: 1050 mV
  1264. [ 0.863957] act_ldo3: 1800 mV
  1265. [ 0.866852] act_ldo4: 3300 mV
  1266. [ 0.869757] act_ldo5: 3300 mV
  1267. [ 0.872649] act_ldo6: 1100 mV
  1268. [ 0.875571] vcc_18: 1800 mV
  1269. [ 0.878517] act_ldo8: 1850 mV
  1270. [ 0.885081] vdd_arm: 712 <--> 1500 mV at 1100 mV
  1271. [ 0.891493] vdd_gpu: 712 <--> 1500 mV at 900 mV
  1272. [ 0.892450] rk808_i2c_probe,line=1368
  1273. [ 0.894103] The device is not rk808 -11
  1274. [ 0.894366] rk808: probe of 0-001b failed with error -11
  1275. [ 0.899531] Switching to clocksource arch_sys_counter
  1276. [ 0.965730] rk-fb rockchip-fb: rk fb ion client create success!
  1277. [ 0.965802] rk-fb rockchip-fb: rockchip framebuffer driver probe
  1278. [ 0.966914] rk-screen rk_screen.9: rockchip screen probe success
  1279. [ 0.967688] rk32-lvds rk32-lvds: rk32 lvds driver probe success
  1280. [ 0.968427] rk32-edp ff970000.edp: screen is not edp!
  1281. [ 0.968501] rk32-edp: probe of ff970000.edp failed with error -22
  1282. [ 0.969740] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
  1283. [ 0.970510] graphics fb0: rockchip framebuffer registerd:fb0
  1284. [ 0.971538] graphics fb1: rockchip framebuffer registerd:fb1
  1285. [ 0.972089] graphics fb2: rockchip framebuffer registerd:fb2
  1286. [ 0.972649] graphics fb3: rockchip framebuffer registerd:fb3
  1287. [ 0.973198] graphics fb4: rockchip framebuffer registerd:fb4
  1288. [ 0.974871] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
  1289. [ 0.975308] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  1290. [ 0.975382] rk3288-lcdc lcdc0: wakeup from standby!
  1291. [ 1.109468] alloc_buffer:ion_phy_addr=0x10000000
  1292. [ 1.152800] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
  1293. [ 1.283841] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
  1294. [ 1.285002] rockchip_set_mux:warning ignore bank num 15
  1295. [ 1.285445] rockchip_set_mux:warning ignore bank num 15
  1296. [ 1.285844] rockchip_set_mux:warning ignore bank num 15
  1297. [ 1.286239] rockchip_set_mux:warning ignore bank num 15
  1298. [ 1.286629] rockchip_set_mux:warning ignore bank num 15
  1299. [ 1.287024] rockchip_set_mux:warning ignore bank num 15
  1300. [ 1.287929] rockchip_set_mux:warning ignore bank num 15
  1301. [ 1.288475] rockchip_set_mux:warning ignore bank num 15
  1302. [ 1.289313] rockchip_set_mux:warning ignore bank num 15
  1303. [ 1.289803] rockchip_set_mux:warning ignore bank num 15
  1304. [ 1.290632] rockchip_set_mux:warning ignore bank num 15
  1305. [ 1.291127] rockchip_set_mux:warning ignore bank num 15
  1306. [ 1.291960] rockchip_set_mux:warning ignore bank num 15
  1307. [ 1.292476] rockchip_set_mux:warning ignore bank num 15
  1308. [ 1.316202] NET: Registered protocol family 2
  1309. [ 1.317647] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  1310. [ 1.318136] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  1311. [ 1.318634] TCP: Hash tables configured (established 8192 bind 8192)
  1312. [ 1.318786] TCP: reno registered
  1313. [ 1.318839] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1314. [ 1.318970] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1315. [ 1.319608] NET: Registered protocol family 1
  1316. [ 1.320218] Unpacking initramfs...
  1317. [ 1.830674] Freeing initrd memory: 2516K (c4bf0000 - c4e65000)
  1318. [ 1.832861] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
  1319. [ 1.834279] probe device ff9a0000.vpu_service
  1320. [ 1.834823] vpu_service: power on
  1321. [ 1.835984] checking hw id 4831
  1322. [ 1.837086] vpu_service set to auto frequency mode
  1323. [ 1.837253] vcodec vpu_service: vcodec ion client create success!
  1324. [ 1.838371] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
  1325. [ 1.838478] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
  1326. [ 1.838531] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e277000
  1327. [ 1.838580] vpu_service: power off...
  1328. [ 1.838666] done
  1329. [ 1.838699] init success
  1330. [ 1.838859] probe device ff9c0000.hevc_service
  1331. [ 1.839456] hevc_service: power on
  1332. [ 1.840577] checking hw id 6867
  1333. [ 1.841401] vcodec hevc_service: vcodec ion client create success!
  1334. [ 1.842332] rk_iommu ff9c0440.hevc_mmu: (hevc) Enabled
  1335. [ 1.842434] rk_iommu ff9c0440.hevc_mmu: (hevc) Disabled
  1336. [ 1.842487] rk_iommu ff9c0440.hevc_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e274000
  1337. [ 1.842534] hevc_service: power off...
  1338. [ 1.842619] done
  1339. [ 1.842651] init success
  1340. [ 1.843011] rknandbase v1.0 2014-03-31
  1341. [ 1.843636] rknand_probe clk rate = 148500000
  1342. [ 1.844020] rknand_driver:ret = 0
  1343. [ 1.845220] audit: initializing netlink socket (disabled)
  1344. [ 1.845334] type=2000 audit(1.340:1): initialized
  1345. [ 1.847623] bounce pool size: 64 pages
  1346. [ 1.863130] fuse init (API version 7.22)
  1347. [ 1.864457] msgmni has been set to 1456
  1348. [ 1.870577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  1349. [ 1.870638] io scheduler noop registered
  1350. [ 1.870677] io scheduler deadline registered
  1351. [ 1.870998] io scheduler cfq registered (default)
  1352. [ 1.872448] Console: switching to colour frame buffer device 240x67
  1353. [ 1.921417] rga ff920000.rga: rga ion client create success!
  1354. [ 1.921831] rga: Driver loaded succesfully
  1355. [ 1.923342] IEP Power ON
  1356. [ 1.923457] iep ion client create success!
  1357. [ 1.924449] rk_iommu ff900800.iep_mmu: (iep) Enabled
  1358. [ 1.924540] IEP Power OFF
  1359. [ 1.924585] rk_iommu ff900800.iep_mmu: (iep) Disabled
  1360. [ 1.924638] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e26a000
  1361. [ 1.924703] IEP Driver loaded succesfully
  1362. [ 1.925014] Module initialized.
  1363. [ 1.927478] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
  1364. [ 1.927550] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  1365. [ 1.931869] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
  1366. [ 1.931939] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  1367. [ 1.932676] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
  1368. [ 1.932738] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
  1369. [ 1.932782] pwm_regulator_probe:error
  1370. [ 1.932856] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
  1371. [ 1.934021] rk_serial.c v1.8 2014-03-04
  1372. [ 1.934646] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
  1373. [ 1.935264] serial ff180000.serial: membase 0xf0172000
  1374. [ 1.944867] loop: module loaded
  1375. [ 1.946692] SCSI Media Changer driver v0.25
  1376. [ 1.947694] tun: Universal TUN/TAP device driver, 1.6
  1377. [ 1.947741] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1378. [ 1.949402] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  1379. [ 1.949458] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
  1380. [ 1.949506] stmmac_probe_config_dt: clock input or output? (input).
  1381. [ 1.949552] stmmac_probe_config_dt: TX delay(0x30).
  1382. [ 1.949592] stmmac_probe_config_dt: RX delay(0x10).
  1383. [ 1.949713] stmmac_probe_config_dt: is rockchip,rk3288-gmac
  1384. [ 1.949752] stmmc_pltfr_init:
  1385. [ 1.949788] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  1386. [ 1.949863] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
  1387. [ 1.949902] stmmc_pltfr_init: init for RGMII
  1388. [ 1.949941] tx delay=0x30
  1389. [ 1.949941] rx delay=0x10
  1390. [ 1.951343] stmmac - user ID: 0x10, Synopsys ID: 0x35
  1391. [ 1.951385] Normal descriptors
  1392. [ 1.951416] Ring mode enabled
  1393. [ 1.951449] DMA HW capability register supported
  1394. [ 1.951488] RX Checksum Offload Engine supported (type 2)
  1395. [ 1.951526] TX Checksum insertion supported
  1396. [ 1.951559] Wake-Up On Lan supported
  1397. [ 1.951702] Enable RX Mitigation via HW Watchdog Timer
  1398. [ 1.953082] PPP generic driver version 2.4.2
  1399. [ 1.953612] PPP BSD Compression module registered
  1400. [ 1.953660] PPP Deflate Compression module registered
  1401. [ 1.953725] PPP MPPE Compression module registered
  1402. [ 1.953769] NET: Registered protocol family 24
  1403. [ 1.953864] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  1404. [ 1.953914] CSLIP: code copyright 1989 Regents of the University of California.
  1405. [ 1.953960] Rockchip WiFi SYS interface (V1.00) ...
  1406. [ 1.954197] usbcore: registered new interface driver catc
  1407. [ 1.954329] usbcore: registered new interface driver kaweth
  1408. [ 1.954374] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  1409. [ 1.954502] usbcore: registered new interface driver pegasus
  1410. [ 1.954627] usbcore: registered new interface driver rtl8150
  1411. [ 1.954750] usbcore: registered new interface driver r8152
  1412. [ 1.954789] hso: drivers/net/usb/hso.c: Option Wireless
  1413. [ 1.955033] usbcore: registered new interface driver hso
  1414. [ 1.955186] usbcore: registered new interface driver asix
  1415. [ 1.955313] usbcore: registered new interface driver ax88179_178a
  1416. [ 1.955438] usbcore: registered new interface driver cdc_ether
  1417. [ 1.955563] usbcore: registered new interface driver cdc_eem
  1418. [ 1.955685] usbcore: registered new interface driver dm9601
  1419. [ 1.955808] usbcore: registered new interface driver dm9620
  1420. [ 1.955972] usbcore: registered new interface driver smsc75xx
  1421. [ 1.956128] usbcore: registered new interface driver smsc95xx
  1422. [ 1.956254] usbcore: registered new interface driver gl620a
  1423. [ 1.956379] usbcore: registered new interface driver net1080
  1424. [ 1.956503] usbcore: registered new interface driver plusb
  1425. [ 1.956641] usbcore: registered new interface driver rndis_host
  1426. [ 1.956778] usbcore: registered new interface driver cdc_subset
  1427. [ 1.956906] usbcore: registered new interface driver zaurus
  1428. [ 1.957039] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  1429. [ 1.957214] usbcore: registered new interface driver int51x1
  1430. [ 1.957343] usbcore: registered new interface driver kalmia
  1431. [ 1.957471] usbcore: registered new interface driver ipheth
  1432. [ 1.957611] usbcore: registered new interface driver sierra_net
  1433. [ 1.957750] usbcore: registered new interface driver cx82310_eth
  1434. [ 1.957912] usbcore: registered new interface driver cdc_ncm
  1435. [ 1.958043] usbcore: registered new interface driver qmi_wwan
  1436. [ 1.958172] usbcore: registered new interface driver cdc_mbim
  1437. [ 1.958214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1438. [ 1.961428] ehci_rk_probe f1a00000 f1a00010
  1439. [ 1.961486] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
  1440. [ 1.961581] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
  1441. [ 1.962617] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
  1442. [ 1.982179] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
  1443. [ 1.982466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1444. [ 1.982529] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1445. [ 1.982582] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
  1446. [ 1.982633] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  1447. [ 1.982679] usb usb1: SerialNumber: ff500000.usb
  1448. [ 1.984018] hub 1-0:1.0: USB hub found
  1449. [ 1.984100] hub 1-0:1.0: 1 port detected
  1450. [ 2.011694] ehci_rk_probe ok
  1451. [ 2.012150] usbcore: registered new interface driver cdc_acm
  1452. [ 2.012196] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1453. [ 2.012378] usbcore: registered new interface driver usblp
  1454. [ 2.012519] usbcore: registered new interface driver cdc_wdm
  1455. [ 2.012753] usbcore: registered new interface driver usb-storage
  1456. [ 2.012888] usbcore: registered new interface driver ums-alauda
  1457. [ 2.013015] usbcore: registered new interface driver ums-cypress
  1458. [ 2.013144] usbcore: registered new interface driver ums-datafab
  1459. [ 2.013268] usbcore: registered new interface driver ums_eneub6250
  1460. [ 2.013392] usbcore: registered new interface driver ums-freecom
  1461. [ 2.013516] usbcore: registered new interface driver ums-isd200
  1462. [ 2.013640] usbcore: registered new interface driver ums-jumpshot
  1463. [ 2.013761] usbcore: registered new interface driver ums-karma
  1464. [ 2.013900] usbcore: registered new interface driver ums-onetouch
  1465. [ 2.014030] usbcore: registered new interface driver ums-sddr09
  1466. [ 2.014158] usbcore: registered new interface driver ums-sddr55
  1467. [ 2.014280] usbcore: registered new interface driver ums-usbat
  1468. [ 2.014562] usbcore: registered new interface driver usbserial
  1469. [ 2.014698] usbcore: registered new interface driver usbserial_generic
  1470. [ 2.014812] usbserial: USB Serial support registered for generic
  1471. [ 2.014944] usbcore: registered new interface driver option
  1472. [ 2.015063] usbserial: USB Serial support registered for GSM modem (1-port)
  1473. [ 2.015380] usbcore: registered new interface driver trancevibrator
  1474. [ 2.015425] usb20_otg: version 3.10a 21-DEC-2012
  1475. [ 2.016479] f1a80040
  1476. [ 2.016529] Core Release: 3.10a
  1477. [ 2.016571] Setting default values for core params
  1478. [ 2.016992] Using Buffer DMA mode
  1479. [ 2.017032] Periodic Transfer Interrupt Enhancement - disabled
  1480. [ 2.017072] Multiprocessor Interrupt Enhancement - disabled
  1481. [ 2.017114] OTG VER PARAM: 0, OTG VER FLAG: 0
  1482. [ 2.017150] ^^^^^^^^^^^^^^^^^Device Mode
  1483. [ 2.017195] Dedicated Tx FIFOs mode
  1484. [ 2.017253] pcd_init otg_dev = eda0e580
  1485. [ 2.017760] usb20_otg ff580000.usb: DWC OTG Controller
  1486. [ 2.017868] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
  1487. [ 2.017977] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
  1488. [ 2.018175] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  1489. [ 2.018237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1490. [ 2.018289] usb usb2: Product: DWC OTG Controller
  1491. [ 2.018335] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  1492. [ 2.018382] usb usb2: SerialNumber: ff580000.usb
  1493. [ 2.019715] hub 2-0:1.0: USB hub found
  1494. [ 2.019792] hub 2-0:1.0: 1 port detected
  1495. [ 2.020715] usb20_host: version 3.10a 21-DEC-2012
  1496. [ 2.024264] f1b00040
  1497. [ 2.024313] Core Release: 3.10a
  1498. [ 2.024352] Setting default values for core params
  1499. [ 2.024795] Using Buffer DMA mode
  1500. [ 2.024837] Periodic Transfer Interrupt Enhancement - disabled
  1501. [ 2.024876] Multiprocessor Interrupt Enhancement - disabled
  1502. [ 2.024917] OTG VER PARAM: 0, OTG VER FLAG: 0
  1503. [ 2.024952] ^^^^^^^^^^^^^^^^^^Host Mode
  1504. [ 2.025031] usb20_host ff540000.usb: DWC OTG Controller
  1505. [ 2.025130] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
  1506. [ 2.025236] usb20_host ff540000.usb: irq 57, io mem 0x00000000
  1507. [ 2.025398] Init: Power Port (0)
  1508. [ 2.025583] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  1509. [ 2.025644] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1510. [ 2.025696] usb usb3: Product: DWC OTG Controller
  1511. [ 2.025743] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  1512. [ 2.025790] usb usb3: SerialNumber: ff540000.usb
  1513. [ 2.027166] hub 3-0:1.0: USB hub found
  1514. [ 2.027242] hub 3-0:1.0: 1 port detected
  1515. [ 2.028870] .. rk pwm remotectl v1.0 init
  1516. [ 2.029118] remotectl probe j=0x0
  1517. [ 2.029635] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
  1518. [ 2.030261] pwm enable val=0x646205
  1519. [ 2.031145] usbcore: registered new interface driver xpad
  1520. [ 2.031396] usbcore: registered new interface driver usb_acecad
  1521. [ 2.031563] usbcore: registered new interface driver aiptek
  1522. [ 2.031721] usbcore: registered new interface driver gtco
  1523. [ 2.031875] usbcore: registered new interface driver hanwang
  1524. [ 2.032026] usbcore: registered new interface driver kbtab
  1525. [ 2.032242] usbcore: registered new interface driver wacom
  1526. [ 2.033376] sensor_register_slave:mma8452,id=17
  1527. [ 2.033427] sensor_register_slave:cm3217,id=44
  1528. [ 2.033467] sensor_register_slave:cm3218,id=45
  1529. [ 2.040231] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
  1530. [ 2.040399] i2c /dev entries driver
  1531. [ 2.042653] IR NEC protocol handler initialized
  1532. [ 2.042699] IR RC5(x) protocol handler initialized
  1533. [ 2.042738] IR RC6 protocol handler initialized
  1534. [ 2.042773] IR JVC protocol handler initialized
  1535. [ 2.042808] IR Sony protocol handler initialized
  1536. [ 2.042843] IR RC5 (streamzap) protocol handler initialized
  1537. [ 2.042880] IR SANYO protocol handler initialized
  1538. [ 2.042915] IR MCE Keyboard/mouse protocol handler initialized
  1539. [ 2.043166] usbcore: registered new interface driver uvcvideo
  1540. [ 2.043207] USB Video Class driver (1.1.1)
  1541. [ 2.043252] CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
  1542. [ 2.046418] D1:camsys_platform_probe(1061): 1-gpios-cifpower: gpio=236
  1543. [ 2.046505] D1:camsys_platform_probe(1064): gpios-cifpower: gpio_request
  1544. [ 2.046569] D1:camsys_platform_probe(1066): 1-gpios-cifpower: gpio_request=0
  1545. [ 2.046633] D1:camsys_platform_probe(1075): gpios-cifpower: 236 high
  1546. [ 2.046857] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
  1547. [ 2.047331] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xf19b0000 size: 0x4000)
  1548. [ 2.049408] D1:camsys_platform_probe(1208): ff910000.isp memory:
  1549. [ 2.049471] D1:camsys_platform_probe(1218): Register memory (phy: 0xff910000 vir: 0xf19e0000 size: 0x10000)
  1550. [ 2.049531] D1:camsys_platform_probe(1213): I2c memory (phy: 0x2da20000 vir: 0xeda20000 size: 0x1000)
  1551. [ 2.049584] D1:camsys_platform_probe(1233): Probe ff910000.isp device success
  1552. [ 2.052560] device-mapper: uevent: version 1.0.3
  1553. [ 2.053308] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  1554. [ 2.054240] Bluetooth: HCI UART driver ver 2.2
  1555. [ 2.054294] Bluetooth: HCI H4 protocol initialized
  1556. [ 2.054334] Bluetooth: HCILL protocol initialized
  1557. [ 2.060286] cpufreq version 1.0, suspend freq 1200 MHz
  1558. [ 2.060928] cpuidle: using governor ladder
  1559. [ 2.060976] cpuidle: using governor menu
  1560. [ 2.061093] Synopsys Designware Multimedia Card Interface Driver
  1561. [ 2.061845] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
  1562. [ 2.062710] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
  1563. [ 2.063186] 3230..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
  1564. [ 2.063239] Line3235..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
  1565. [ 2.063610] 1357..dw_mci_set_ios: no card. [mmc0]
  1566. [ 2.080583] 1357..dw_mci_set_ios: no card. [mmc0]
  1567. [ 2.100237] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
  1568. [ 2.100270] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
  1569. [ 2.100294] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
  1570. [ 2.100650] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
  1571. [ 2.101421] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
  1572. [ 2.101624] 3224..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
  1573. [ 2.102168] 1357..dw_mci_set_ios: no card. [mmc1]
  1574. [ 2.119862] 1357..dw_mci_set_ios: no card. [mmc1]
  1575. [ 2.132376] mmc0: BKOPS_EN bit is not set
  1576. [ 2.134283] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
  1577. [ 2.136585] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
  1578. [ 2.136612] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
  1579. [ 2.139708] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
  1580. [ 2.139727] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
  1581. [ 2.140082] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
  1582. [ 2.140316] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
  1583. [ 2.140464] 3230..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
  1584. [ 2.140576] 1357..dw_mci_set_ios: no card. [mmc2]
  1585. [ 2.151649] rk_sdmmc: BOOT
  1586. [ 2.151649] execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_INVALID SDMMC_SHIFT_DEGREE_INVALID[mmc0]
  1587. [ 2.151768] mmc0: new HS200 MMC card at address 0001
  1588. [ 2.152097] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
  1589. [ 2.152504] parameter: 0x000000000 -- 0x000400000 (4 MB)
  1590. [ 2.152521] uboot: 0x000400000 -- 0x000800000 (4 MB)
  1591. [ 2.152534] misc: 0x000800000 -- 0x000c00000 (4 MB)
  1592. [ 2.152547] resource: 0x000c00000 -- 0x001c00000 (16 MB)
  1593. [ 2.152560] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
  1594. [ 2.152572] boot: 0x002c00000 -- 0x004c00000 (32 MB)
  1595. [ 2.152584] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
  1596. [ 2.152597] backup: 0x006c00000 -- 0x00a000000 (52 MB)
  1597. [ 2.152609] cache: 0x00a000000 -- 0x012000000 (128 MB)
  1598. [ 2.152622] kpanic: 0x012000000 -- 0x012400000 (4 MB)
  1599. [ 2.152634] system: 0x012400000 -- 0x042400000 (768 MB)
  1600. [ 2.152646] metadata: 0x042400000 -- 0x042800000 (4 MB)
  1601. [ 2.152659] userdata: 0x042800000 -- 0x082800000 (1024 MB)
  1602. [ 2.152672] linuxroot: 0x082800000 -- 0x146800000 (3136 MB)
  1603. [ 2.152684] user: 0x146800000 -- 0x3a3a00000 (9682 MB)
  1604. [ 2.152730] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p151357..dw_mci_set_ios: no card. [mmc1]
  1605. [ 2.159203] 1357..dw_mci_set_ios: no card. [mmc2]
  1606. [ 2.178889] 1357..dw_mci_set_ios: no card. [mmc2]
  1607. [ 2.179084] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
  1608. [ 2.179097] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
  1609. [ 2.179351] leds-gpio leds.31: pins are not configured from the driver
  1610. [ 2.179578] hidraw: raw HID events driver (C) Jiri Kosina
  1611. [ 2.180831] usbcore: registered new interfoae ngivpl usehwd
  1612. t.
  1613. 2.180841] usbhid: USB HID core driver
  1614. [ 2.181137] ashmem: initialized
  1615. [ 2.181241] logger: created 256K log 'log_main'
  1616. [ 2.181346] logger: created 256K log 'log_events'
  1617. [ 2.181gin] Loagerg cseeneda25dr ler ... FATAL: Could not load /lib/modules/3.10.0/modules.dep: No such file or'log_ctdro'
  1618.  
  1619. [ 2.181539] logger: created 256K log 'log_system'
  1620. FA L:.1ou521noinpoa: /l2b/modules/pa10.0/modules as /devices/fdep00No.auc/kfi.34/inpu dinect1ry[
  1621. 2.183128] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ; cannot claim for 2-0010
  1622. [ 2.183145] rockchiFATAL: Could not load /lib/modul-s/nctr.0ff7dul00.penctNo uch 200e 2-0di0) toryu
  1623. -22
  1624. [ 2.183156] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
  1625. [ 2.183168] ES8323 2-0010: Error applying settinFgTA reCould notrloadhinis/modules/3.ack0/[o ule .2.183447] es8323 probe i2c recv ok
  1626. [ 2.183672]dep: N such filei2c or di-cororydriver [Edone.
  1627. S8323] using legacy suspend method
  1628. [ 2.Begin: Running /scripts/init-premount ... 183682] i2c-core: driver [ES8323] using legacy resume method
  1629. [ 2.183995] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  1630. [ 2.184026] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  1631. [ 2.184044] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  1632. [ 2.184280] es8323_probe
  1633. [ 2.184364] es8323_probe:register ISR (irq=194)
  1634. [ 2.818845] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
  1635. [ 2.818857] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
  1636. [ 2.818868] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
  1637. [ 2.818877] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
  1638. [ 2.818887] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
  1639. [ 2.818895] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
  1640. [ 2.818906] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
  1641. [ 2.818914one.8
  1642. 23 2-0010:egSo: Funlengtooad froe e stNP .. -> NULL -> Right LiBe in:
  1643. un in2./1c9ip]s/Soc2l 2o0010: done:
  1644. no dapm match for RINPUT2 --> NULL --> Right Line Mux
  1645. [ 2.818931] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
  1646. [ 2.818940] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
  1647. [ 2.818949] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
  1648. [ 2.818958] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
  1649. [ 2.818965] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
  1650. [ 2.818975] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
  1651. [ 2.818982] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
  1652. [ 2.818991] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
  1653. [ 2.818999] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
  1654. [ 2.819008] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
  1655. [ 2.819016] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
  1656. [ 2.819025] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
  1657. [ 2.819032] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
  1658. [ 2.819041] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
  1659. [ 2.819049] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
  1660. [ 2.819059] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
  1661. [ 2.819067] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
  1662. [ 2.819075] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
  1663. [ 2.819083] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
  1664. [ 2.819092] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
  1665. [ 2.819100] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
  1666. [ 2.819108] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
  1667. [ 2.819116] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
  1668. [ 2.819137] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
  1669. [ 2.819145] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
  1670. [ 2.819153] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
  1671. [ 2.819161] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
  1672. [ 2.819171] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
  1673. [ 2.819179] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
  1674. [ 2.819188] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
  1675. [ 2.819196] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
  1676. [ 2.819205] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
  1677. [ 2.819214] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
  1678. [ 2.819223] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
  1679. [ 2.819231] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
  1680. [ 2.819366] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
  1681. [ 2.819379] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
  1682. [ 2.819389] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
  1683. [ 2.819399] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
  1684. [ 2.819419] ES8323 2-0010: ASoC: mux Differential Mux has no paths
  1685. [ 2.822288] Enter::rk29_es8323_init----135
  1686. [ 2.825630] rockchip-es8323 rockchip-es8323.29: ES8323 HiFi <-> rockchip-i2s.0 mapping ok
  1687. [ 2.826116] u32 classifier
  1688. [ 2.826123] Actions configured
  1689. [ 2.826134] Netfilter messages via NETLINK v0.30.
  1690. [ 2.826193] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  1691. [ 2.826467] ctnetlink v0.93: registering with nfnetlink.
  1692. [ 2.826529] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1693. [ 2.826536] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1694. [ 2.826751] xt_time: kernel timezone is -0000
  1695. [ 2.826924] ip_tables: (C) 2000-2006 Netfilter Core Team
  1696. [ 2.827031] arp_tables: (C) 2002 David S. Miller
  1697. [ 2.827065] TCP: cubic registered
  1698. [ 2.827072] Initializing XFRM netlink socket
  1699. [ 2.827252] NET: Registered protocol family 10
  1700. [ 2.827694] mip6: Mobile IPv6
  1701. [ 2.827717] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1702. [ 2.827816] sit: IPv6 over IPv4 tunneling driver
  1703. [ 2.828092] NET: Registered protocol family 17
  1704. [ 2.828118] NET: Registered protocol family 15
  1705. [ 2.828163] Bridge firewalling registered
  1706. [ 2.828174] Ebtables v2.0 registered
  1707. [ 2.828338] Bluetooth: RFCOMM TTY layer initialized
  1708. [ 2.828360] Bluetooth: RFCOMM socket layer initialized
  1709. [ 2.828368] Bluetooth: RFCOMM ver 1.11
  1710. [ 2.828375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1711. [ 2.828382] Bluetooth: BNEP filters: protocol multicast
  1712. [ 2.828392] Bluetooth: BNEP socket layer initialized
  1713. [ 2.828398] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1714. [ 2.828409] Bluetooth: HIDP socket layer initialized
  1715. [ 2.828437] l2tp_core: L2TP core driver, V2.0
  1716. [ 2.828451] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  1717. [ 2.828458] [WLAN_RFKILL]: Enter rfkill_wlan_init
  1718. [ 2.828651] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  1719. [ 2.828663] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
  1720. [ 2.828670] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  1721. [ 2.828678] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
  1722. [ 2.828686] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  1723. [ 2.828706] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
  1724. [ 2.828725] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
  1725. [ 2.828733] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  1726. [ 2.828758] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
  1727. [ 2.828800] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  1728. [ 2.828846] [BT_RFKILL]: Enter rfkill_rk_init
  1729. [ 2.828959] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
  1730. [ 2.828975] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
  1731. [ 2.828987] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
  1732. [ 2.829000] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
  1733. [ 2.829012] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
  1734. [ 2.829056] [BT_RFKILL]: Request irq for bt wakeup host
  1735. [ 2.829146] [BT_RFKILL]: ** disable irq
  1736. [ 2.829220] [BT_RFKILL]: ap6335 device registered.
  1737. [ 3.458083] ******** Show Sink Info ********
  1738. [ 3.458095] Max tmds clk is 0
  1739. [ 3.458100] Support video mode:
  1740. [ 3.458105] 1920x1080p@60Hz
  1741. [ 3.458110] 1280x720p@60Hz
  1742. [ 3.458115] 720x480p@60Hz
  1743. [ 3.458120] Support video color mode:
  1744. [ 3.458124] RGB
  1745. [ 3.458128] YCbCr422
  1746. [ 3.458132] YCbCr444
  1747. [ 3.458136] Support video color depth:
  1748. [ 3.458141] 24bit
  1749. [ 3.458145] Support audio type:
  1750. [ 3.458150] LPCM
  1751. [ 3.458154] Support max audio channel is 2
  1752. [ 3.458159] Support audio sample rate:
  1753. [ 3.458163] 32000
  1754. [ 3.458167] 44100
  1755. [ 3.458171] 48000
  1756. [ 3.458175] Support audio word lenght:
  1757. [ 3.458179] 16bit
  1758. [ 3.458183] 20bit
  1759. [ 3.458187] 24bit
  1760. [ 3.458191]
  1761. [ 3.458194] ******** Show Sink Info ********
  1762. [ 3.458209]
  1763. [ 3.458209] rk_fb_switch_screen lcdc_id 0 type 6 enable 1
  1764. [ 3.458222] fb0 win id 1 state 1
  1765. [ 3.458242] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  1766. [ 3.458264] fb1 win id 0 state 0
  1767. [ 3.458269] fb2 win id 2 state 0
  1768. [ 3.458275] fb3 win id 3 state 0
  1769. [ 3.458280] fb4 win id 4 state 0
  1770. [ 3.458285]
  1771. [ 3.458285] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
  1772. [ 3.458285]
  1773. [ 3.458300] pixel clk is 148500000 tmds clk is 148500000
  1774. [ 3.458340] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
  1775. [ 3.615890] phy_int 0x3d i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x02
  1776. [ 3.615900] phy_stat is 0xf3 phy_pol 0xf3 phy_int 0x02
  1777. [ 3.615900]
  1778. [ 3.615910] new phy pol is 0xfd cur pol is 0xf1
  1779. [ 3.615910]
  1780. [ 3.615919] audio int is 0x02
  1781. [ 3.615929] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
  1782. [ 3.616333] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  1783. [ 3.616351] rk3288_init_suspend
  1784. [ 3.616358] rk3288_suspend_init enter
  1785. [ 3.616497] rk3288_suspend_init: pm_ctrbits =40017
  1786. [ 3.616536] gpio_get_dts_info suspend:8
  1787. [ 3.616543] gpio_get_dts_info resume:8
  1788. [ 3.616548] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  1789. [ 3.616574] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  1790. [ 3.616696] clks_gating_suspend_init:clkgt info ok
  1791. [ 3.616777] Registering SWP/SWPB emulation handler
  1792. [ 3.617083] ddrfreq: verion 1.2 20140526
  1793. [ 3.617094] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
  1794. [ 3.617101] ddrfreq: auto-freq=0
  1795. [ 3.617107] ddrfreq: auto-freq-table[0] 240MHz
  1796. [ 3.617113] ddrfreq: auto-freq-table[1] 324MHz
  1797. [ 3.617118] ddrfreq: auto-freq-table[2] 456MHz
  1798. [ 3.617124] ddrfreq: auto-freq-table[3] 528MHz
  1799. [ 3.618794] act_ldo3: operation not allowed
  1800. [ 3.619031] vga_edid_probe: turn on ldo3 done.
  1801. [ 3.619057] act_ldo4: operation not allowed
  1802. [ 3.619288] vga_edid_probe: turn on ldo done.
  1803. [ 3.619321] act_ldo2: operation not allowed
  1804. [ 3.619552] vga_edid_probe: turn on ldo2 done.
  1805. [ 3.619573] act_ldo8: operation not allowed
  1806. [ 3.619802] vga_edid_probe: turn on ldo done.
  1807. [ 3.624845] unable to read EDID block.
  1808. [ 3.659392] unable to read EDID block.
  1809. [ 3.693936] unable to read EDID block.
  1810. [ 3.693948] vga-ddc: read and parse edid failed errno:-5.
  1811. [ 3.693955] vga_edid_probe: success. 10
  1812. [ 3.694062] firefly_vga_get_enable 180, 0
  1813. [ 3.694070] firefly_vga_get_status 186
  1814. [ 3.694076] firefly_vga_set_enable 159 enable:0
  1815. [ 3.694118] regulator-dummy: disabling
  1816. [ 3.694395] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  1817. [ 3.694418] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  1818. [ 3.694431] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  1819. [ 3.694510] pcd_pullup, is_on 0
  1820. [ 3.694544] file system registered
  1821. [ 3.695047] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1822. [ 3.695056] android_usb gadget: Number of LUNs=2
  1823. [ 3.695063] lun0: LUN: removable file: (no medium)
  1824. [ 3.695069] lun1: LUN: removable file: (no medium)
  1825. [ 3.695178] android_usb gadget: android_usb ready
  1826. [ 3.695247] sensor_init: Probe name sensors
  1827. [ 3.695261] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
  1828. [ 3.695787] rtc_hym8563 0-0051: setting system clock to 2011-01-01 13:01:39 UTC (1293886899)
  1829. [ 3.701143] usbcore: registered new interface driver snd-usb-aud
  1830.  
  1831. [ 3.701165] ALSA deviceBegst:
  1832. Runni 3./s1170]s/loc: RK_emo323 ... 3.702409] Freeing unused kerFelALemCoy:d 36tKl(cd 8fib0 odc0ede0.1)
  1833. 0/ du3.s.de89 Nrosuch f-he o-sdiifctocy
  1834. hip-hdmi-spdif.27: rk-hdmi-spdif-hifi <->onec
  1835. hip-spdif mapping okF
  1836. [ : Co724 not udev /li7]:oduleti3.10.rsiodule5
  1837. ep: 3 9uch 0] e c_ direcd_en
  1838. le, enable host controller
  1839. [ 4.132103] Using Buffer DMA mode
  1840. [ 4.132110giPe Rodni T /ssfip I/leralptotnha .em nt - disabledon[
  1841. 4ne3
  1842. 16] MultiprocissoRunnter /stripha/inmentottdm .bled
  1843. [ 4.132123] OTG VER PARAM: 0, OTG VER FLAG: 0
  1844. [ 4.132128] ^^^^^^^^^^^^^^^^^^Host Mode
  1845. [ 4.176461] Initd Pe.
  1846. r Port (0)
  1847. [ 4.412563] Indeed it is in host mode hprt0 = 00021501
  1848. [ 4.589671] usb 3-1: new high-speed USB device number 2 using usb20_host
  1849. [ 4.589734] Indeed it is in host mode hprt0 = 00001101
  1850. [ 4.786668] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
  1851. [ 4.786678] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  1852. [ 4.786686] usb 3-1: Product: USB 2.0 Hub [MTT]
  1853. [ 4.787028] hub 3-1:1.0: USB hub found
  1854. [ 4.787081] hub 3-1:1.0: 4 ports detected
  1855. [ 4.929220] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
  1856. SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.29: No such file or directory
  1857. [ 5.138107] init: plymouth-upstart-bridge main process (361) terminated with status 1
  1858. [ 5.138210] init: plymouth-upstart-bridge main process ended, respawning
  1859. [ 5.161613] init: plymouth-upstart-bridge main process (369) terminated with status 1
  1860. [ 5.161688] init: plymouth-upstart-bridge main process ended, respawning
  1861. [ 5.174947] init: plymouth-upstart-bridge main process (374) terminated with status 1
  1862. [ 5.175009] init: plymouth-upstart-bridge main process ended, respawning
  1863. [ 5.184736] init: plymouth-upstart-bridge main process (376) terminated with status 1
  1864. [ 5.184822] init: plymouth-upstart-bridge main process ended, respawning
  1865. [ 5.195038] init: plymouth-upstart-bridge main process (378) terminated with status 1
  1866. [ 5.195098] init: plymouth-upstart-bridge main process ended, respawning
  1867. [ 5.216116] init: ureadahead main process (364) terminated with status 5
  1868. [ 5.334433] init: mounted-proc main process (391) terminated with status 1
  1869. [ 5.806905] systemd-udevd[526]: could not open moddep file '/lib/modules/3.10.0/modules.dep.bin'
  1870. * Starting Mount filesystems on boot[ OK ]
  1871.  
  1872. * Starting Signal sysvinit that the rootfs is mounted[ OK ]
  1873.  
  1874. * Starting Populate and link to /run filesystem[ OK ]
  1875.  
  1876. * Stopping Populate and link to /run filesystem[ OK ]
  1877.  
  1878. * Stopping Track if upstart is running in a container[ OK ]
  1879.  
  1880. * Starting Clean /tmp directory[ OK ]
  1881.  
  1882. * Starting Initialize or finalize resolvconf[ OK ]
  1883.  
  1884. * Stopping Clean /tmp directory[ OK ]
  1885.  
  1886. * Starting set console keymap[ OK ]
  1887.  
  1888. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  1889.  
  1890. * Starting Signal sysvinit that virtual filesystems are mounted[ OK ]
  1891.  
  1892. * Stopping set console keymap[ OK ]
  1893.  
  1894. * Starting Bridge udev events into upstart[ OK ]
  1895.  
  1896. * Starting Signal sysvinit that remote filesystems are mounted[ OK ]
  1897.  
  1898. * Starting device node and kernel event manager[ OK ]
  1899.  
  1900. * Starting Signal sysvinit that local filesystems are mounted[ OK ]
  1901.  
  1902. * Starting restore software rfkill state[ OK ]
  1903.  
  1904. * Stopping restore software rfkill state[ OK ]
  1905.  
  1906. * Starting load modules from /etc/modules[ OK ]
  1907.  
  1908. * Starting cold plug devices[ OK ]
  1909.  
  1910. * Starting log initial device creation[ OK ]
  1911.  
  1912. * Stopping Mount filesystems on boot[ OK ]
  1913.  
  1914. * Stopping load modules from /etc/modules[ OK ]
  1915.  
  1916. * Starting flush early job output to logs[ OK ]
  1917.  
  1918. * Stopping flush early job output to logs[ OK ]
  1919.  
  1920. * Starting set console font[ OK ]
  1921.  
  1922. * Stopping set console font[ OK ]
  1923.  
  1924. * Starting userspace bootsplash[ OK ]
  1925.  
  1926. * Starting Send an event to indicate plymouth is up[ OK ]
  1927.  
  1928. * Starting D-Bus system message bus[ OK ]
  1929.  
  1930. * Stopping Send an event to indicate plymouth is up[ OK ]
  1931.  
  1932. * Starting configure network device security[ OK ]
  1933.  
  1934. * Starting SystemD login management service[ OK ]
  1935.  
  1936. * Starting system logging daemon[ OK ]
  1937.  
  1938. * Stopping userspace bootsplash[ OK ]
  1939.  
  1940. * Starting configure network device[ OK ]
  1941.  
  1942. * Starting configure network device security[ OK ]
  1943.  
  1944. * Starting configure network device security[ OK ]
  1945.  
  1946. * Starting configure network device[ OK ]
  1947.  
  1948. * Starting Mount network filesystems[ OK ]
  1949.  
  1950. * Starting Failsafe Boot Delay[ OK ]
  1951.  
  1952. * Starting configure network device[ OK ]
  1953.  
  1954. * Stopping Failsafe Boot Delay[ OK ]
  1955.  
  1956. * Stopping Mount network filesystems[ OK ]
  1957.  
  1958. * Starting System V initialisation compatibility[ OK ]
  1959.  
  1960. * Starting configure network device security[ OK ]
  1961.  
  1962. * Setting up X socket directories... 
  1963. [ OK ]
  1964.  
  1965. * Stopping System V initialisation compatibility[ OK ]
  1966.  
  1967. * Starting System V runlevel compatibility[ OK ]
  1968.  
  1969. * Starting anac(h)ronistic cron[ OK ]
  1970.  
  1971. * Starting save kernel messages[ OK ]
  1972.  
  1973. * Starting configure network device security[ OK ]
  1974.  
  1975. * Starting regular background program processing daemon[ OK ]
  1976.  
  1977. * Stopping save kernel messages[ OK ]
  1978.  
  1979. * Starting configure virtual network devices[ OK ]
  1980.  
  1981. * Starting OpenSSH server[ OK ]
  1982.  
  1983. * Stopping Restore Sound Card State[ OK ]
  1984.  
  1985. * Starting Bridge file events into upstart[ OK ]
  1986.  
  1987. * Starting Bridge socket events into upstart[ OK ]
  1988.  
  1989. * Stopping cold plug devices[ OK ]
  1990.  
  1991. [ 7.007266] turn on mali power
  1992. * Stopping log initial device creation[ OK ]
  1993.  
  1994. * Stopping System V runlevel compatibility[ OK ]
  1995.  
  1996. 
  1997.  
  1998. Ubuntu 14.04.1 LTS firefly ttyFIQ0
  1999.  
  2000. firefly login: root (automatic login)
  2001. Last login: Tue Sep 23 08:20:52 UTC 2014 on ttyFIQ0
  2002. Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.10.0 armv7l)
  2003.  
  2004. * Documentation: https://help.ubuntu.com/
  2005.  
  2006. The programs included with the Ubuntu system are free software;
  2007. the exact distribution terms for each program are described in the
  2008. individual files in /usr/share/doc/*/copyright.
  2009.  
  2010. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
  2011. applicable law.
  2012.  
  2013. root@firefly:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!