API tools faq
paste
Guest User

Untitled

a guest
Feb 27th, 2017
446
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 90.75 KB | None | 0 0
raw download clone embed print report
  1. ¦
  2. QA9:A;SVN:74E;POC:1FF;STS:0;BOOT:0;INIT:0;READ:0;CHECK:0;PASS:0;
  3. no sdio debug board detected
  4. TE : 268355
  5. BT : 16:15:31 Jul 3 2015
  6. PMU:rn5t618
  7. DC01 v:1100, 0x[36]: 18 -> 28
  8. DC02 v:1150, 0x[37]: 18 -> 2c
  9. DC03 v:1500, 0x[38]: 38 -> 48
  10. LDO01 v:2900, 0x[4c]: 4e -> 50
  11. LDO02 v:1800, 0x[4d]: 24 -> 24
  12. LDO03 v:1800, 0x[4e]: 30 -> 30
  13. LDO04 v:2850, 0x[4f]: 4e -> 4e
  14. LDO05 v:1800, 0x[50]: 24 -> 24
  15. LDO0a v:2700, 0x[56]: 28 -> 28
  16. LDO0b v:900, 0x[57]: 00 -> 00
  17.  
  18. CPU clock is 792MHz
  19.  
  20. CPU type: M8M2
  21. DDR info: 2GB(auto) @ 660MHz(1T)
  22. DDR channel: DDR 0 + DDR 1
  23.  
  24. DDR init use : 12403 us
  25.  
  26. HHH
  27. Boot From SDIO C
  28. 0x0000008d
  29. ucl decompress...pass
  30. 0x12345678
  31. Boot from internal device 1st eMMC on SDIO C
  32.  
  33. TE : 447385
  34.  
  35. System Started
  36.  
  37.  
  38. U-boot-00000-g2877068(m8_k200_v1@netxeon) (Jul 03 2015 - 16:15:18)
  39.  
  40. clr h-ram
  41. DRAM: 2 GiB
  42. relocation Offset is: 6feb0000
  43. show partition table:
  44. part: 0, name : logo, size : 2000000
  45. part: 1, name : recovery, size : 2000000
  46. part: 2, name : misc, size : 2000000
  47. part: 3, name : boot, size : 2000000
  48. part: 4, name : system, size : 60000000
  49. part: 5, name : cache, size : 20000000
  50. part: 6, name : data, size : end
  51. aml_card_type=0x200
  52. MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
  53. [mmc_register] add mmc dev_num=1, port=2, if_type=6
  54. SDIO Port B: 0, SDIO Port C: 1
  55. PMU fault status:
  56. reg[0x9A] = 0x1d
  57. LSI version:04, OTP version:0c
  58. PMU type:RN5T618
  59. register usb cfg[0][1] = 7ff682b0
  60. register usb cfg[2][0] = 7ff6bddc
  61. mcli -- wifi_power_init in uboot --
  62. enter emmc boot
  63. Emmckey: Access range is illegal!
  64. [mmc_init] SDIO Port C:1, if_type=6, initialized OK!
  65. [mmc_get_partition_table] skip cache partition.
  66. Partition table get from SPL is :
  67. name offset size flag
  68. ================================================================================ ===
  69. 0: bootloader 0 400000 0
  70. 1: reserved 2400000 4000000 0
  71. 2: cache 6c00000 20000000 2
  72. 3: env 27400000 800000 0
  73. 4: logo 28400000 2000000 1
  74. 5: recovery 2ac00000 2000000 1
  75. 6: misc 2d400000 2000000 1
  76. 7: boot 2fc00000 2000000 1
  77. 8: system 32400000 60000000 1
  78. 9: data 92c00000 13b500000 4
  79. mmc read lba=0x12000, blocks=0x1
  80. mmc read lba=0x12001, blocks=0x1
  81. mmc_read_partition_tbl: mmc read partition OK!
  82. eMMC/TSD partition table have been checked OK!
  83. i=0,register --- emmc_key
  84. device_boot_flag=2
  85. EMMC BOOT: not init nand
  86. do not init nand : cause boot_device_flag without nand
  87. MMC BOOT, emmc_env_relocate_spec : env_relocate_spec 74
  88. set_storage_device_flag: store 2
  89. Multi dtb tool version: v2 .
  90. Multi dtb detected, support 6 dtbs.
  91. aml_dt soc: m8m2 platform: n200 variant: 2G
  92. dtb 0 soc: m8 plat: k200 vari: 2gsdhc
  93. dtb 1 soc: m8 plat: k200 vari: 2gsdio
  94. dtb 2 soc: m8 plat: k200 vari: sdhc
  95. dtb 3 soc: m8 plat: k200 vari: sdio
  96. dtb 4 soc: m8m2 plat: n200 vari: 1G
  97. dtb 5 soc: m8m2 plat: n200 vari: 2G
  98. Find match dtb: 5
  99. vpu driver detect cpu type: m8m2
  100. vpu clk_level in dts: 7
  101. set vpu clk: 364000000Hz, readback: 364000000Hz(0x700)
  102. Net: Meson_Ethernet
  103. init suspend firmware done. (ret:0)
  104. cvbs trimming.1.v5: 0xa0, 0x0
  105. wipe_data=successful
  106. wipe_cache=successful
  107. reboot_mode=charging
  108. TV mode 576cvbs selected.
  109. cvbs performance type = 2, table = 0
  110. vdac open.1 = 0x1, 0x0
  111. config HPLL
  112. config HPLL done
  113. efuse version is not selected.
  114. Hit Enter key to stop autoboot -- : 0
  115. exit abortboot: 0
  116. sdio_detect return 1
  117. [mmc_init] SDIO Port B:0, if_type=7, initialized OK!
  118. Device: SDIO Port B
  119. Manufacturer ID: 0
  120. OEM: 0
  121. Name: tTran Speed: 20000000
  122. Rd Block Len: 512
  123. SD version 2.0
  124. High Capacity: Yes
  125. Capacity: 15640559616
  126. Boot Part Size: 0
  127. Bus Width: 4-bit
  128. reading s805_autoscript
  129.  
  130. 915 bytes read
  131. ## Executing script at 11000000
  132.  
  133. ** Invalid boot device **
  134. reading uInitrd
  135.  
  136. 5162508 bytes read
  137. reading uImage
  138.  
  139. 6304920 bytes read
  140. reading dtb.img
  141.  
  142. 21708 bytes read
  143. ## Booting kernel from Legacy Image at 14000000 ...
  144. Image Name: Linux-3.10.99
  145. Image Type: ARM Linux Kernel Image (lzo compressed)
  146. Data Size: 6304856 Bytes = 6 MiB
  147. Load Address: 00208000
  148. Entry Point: 00208000
  149. Verifying Checksum ... OK
  150. ## Loading init Ramdisk from Legacy Image at 15000000 ...
  151. Image Name: uInitrd
  152. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  153. Data Size: 5162444 Bytes = 4.9 MiB
  154. Load Address: 00000000
  155. Entry Point: 00000000
  156. Verifying Checksum ... OK
  157. ## Flattened Device Tree blob at 11800000
  158. Booting using the fdt blob at 0x11800000
  159. Uncompressing Kernel Image ... OK
  160. uboot time: 3151132 us.
  161. EFUSE machid is not set.
  162. Using machid 0xf81 from environment
  163. From device tree /memory/ node aml_reserved_end property, for relocate ramdisk a nd fdt, relocate_addr: 0x54f6001
  164. Loading Ramdisk to 05009000, end 054f55cc ... OK
  165. Loading Device Tree to 05000000, end 050084cb ... OK
  166.  
  167. Starting kernel ...
  168.  
  169. [ 0.000000@0] Booting Linux on physical CPU 0x200
  170. [ 0.000000@0] Initializing cgroup subsys cpuset
  171. [ 0.000000@0] Initializing cgroup subsys cpu
  172. [ 0.000000@0] Initializing cgroup subsys cpuacct
  173. [ 0.000000@0] Linux version 3.10.99-vegas812 (root@user-VirtualBox) (gcc vers ion 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #2 SMP PREEMPT Fri Ja n 20 12:39:41 MSK 2017
  174. [ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  175. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruct ion cache
  176. [ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
  177. [ 0.000000@0] physical memory start address is 0x200000
  178. [ 0.000000@0] reserved_end is d9fffff
  179. [ 0.000000@0]
  180. [ 0.000000@0] Total memory is 2046 MiB
  181. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0d9fffff, size: 122 Mi B
  182. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 M iB)
  183. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 M iB)
  184. [ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 M iB)
  185. [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 M iB)
  186. [ 0.000000@0] vdec0(high) : 0x79f00000 - 0x7df00000 ( 64 MiB)
  187. [ 0.000000@0] ppmgr0(high) : 0x77f00000 - 0x79f00000 ( 32 MiB)
  188. [ 0.000000@0] vdin00(low) : 0x09a00000 - 0x0aa00000 ( 16 MiB)
  189. [ 0.000000@0] vdin10(low) : 0x0aa00000 - 0x0ba00000 ( 16 MiB)
  190. [ 0.000000@0] amlvideo20(low) : 0x0ba00000 - 0x0d200000 ( 24 M iB)
  191. [ 0.000000@0] amvideocap0(low) : 0x0d200000 - 0x0da00000 ( 8 M iB)
  192. [ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
  193. [ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB
  194. [ 0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000
  195. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  196. [ 0.000000@0] Meson chip version = RevA (1D:A - 0:74E)
  197. [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c1da1000 s8768 r8192 d15808 u3276 8
  198. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total p ages: 454416
  199. [ 0.000000@0] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.r epair=yes net.ifnames=0
  200. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  201. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes )
  202. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  203. [ 0.000000@0] Memory: 64MB 16MB 1701MB = 1781MB total
  204. [ 0.000000@0] Memory: 1758652k/1758652k available, 65092k reserved, 1184768K highmem
  205. [ 0.000000@0] Virtual kernel memory layout:
  206. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  207. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  208. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  209. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  210. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  211. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  212. [ 0.000000@0] .text : 0xc0008000 - 0xc0a955c8 (10806 kB)
  213. [ 0.000000@0] .init : 0xc0a96000 - 0xc0ad4240 ( 249 kB)
  214. [ 0.000000@0] .data : 0xc0ad6000 - 0xc0b6f660 ( 614 kB)
  215. [ 0.000000@0] .bss : 0xc0b6f660 - 0xc0e8d934 (3193 kB)
  216. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  217. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  218. [ 0.000000@0] NR_IRQS:256
  219. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  220. [ 0.000000@0] Switching to timer-based delay loop
  221. [ 0.000000@0] Console: colour dummy device 80x30
  222. [ 0.000000@0] console [tty0] enabled
  223. [ 0.000000@0] console [ttyS0] enabled
  224. [ 0.325630@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  225. [ 0.335872@0] pid_max: default: 32768 minimum: 301
  226. [ 0.340770@0] Security Framework initialized
  227. [ 0.344914@0] Mount-cache hash table entries: 512
  228. [ 0.354479@0] Initializing cgroup subsys devices
  229. [ 0.354539@0] Initializing cgroup subsys blkio
  230. [ 0.358511@0] CPU: Testing write buffer coherency: ok
  231. [ 0.363810@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  232. [ 0.369277@0] Setting up static identity map for 0xc077a188 - 0xc077a1e0
  233. [ 0.376055@0] L310 cache controller enabled
  234. [ 0.380070@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048 576 B
  235. [ 0.387532@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000
  236. [ 0.395648@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  237. [ 0.480197@0] write pen_release: 1
  238. [ 0.480417@1] CPU1: Booted secondary processor
  239. [ 0.480433@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  240. [ 0.500191@0] write pen_release: 2
  241. [ 0.508326@2] CPU2: Booted secondary processor
  242. [ 0.508343@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  243. [ 0.520190@0] write pen_release: 3
  244. [ 0.528327@3] CPU3: Booted secondary processor
  245. [ 0.528346@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  246. [ 0.528445@0] Brought up 4 CPUs
  247. [ 0.541453@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  248. [ 0.547646@0] CPU: All CPU(s) started in SVC mode.
  249. [ 0.553082@0] devtmpfs: initialized
  250. [ 0.561864@0] clkrate [ xtal ] : 24000000
  251. [ 0.561912@0] clkrate [ pll_sys ] : 792000000
  252. [ 0.564733@0] clkrate [ pll_fixed ] : 2550000000
  253. [ 0.569390@0] clkrate [ pll_vid ] : 648000000
  254. [ 0.573802@0] TODO: clk_get_rate_hpll() is not implement in M8 now
  255. [ 0.579912@0] clkrate [ pll_hpll ] : 0
  256. [ 0.583716@0] clkrate [ pll_ddr ] : 0
  257. [ 0.587417@0] clkrate [ a9_clk ] : 792000000
  258. [ 0.591739@0] clkrate [ clk81 ] : 141666666
  259. [ 0.596277@0] xor: measuring software checksum speed
  260. [ 0.700018@0] arm4regs : 1156.800 MB/sec
  261. [ 0.800020@0] 8regs : 776.800 MB/sec
  262. [ 0.900020@0] 32regs : 800.400 MB/sec
  263. [ 0.900066@0] xor: using function: arm4regs (1156.800 MB/sec)
  264. [ 0.904440@0] pinctrl core: initialized pinctrl subsystem
  265. [ 0.909976@0] regulator-dummy: no parameters
  266. [ 0.915225@0] NET: Registered protocol family 16
  267. [ 0.926378@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  268. [ 0.928822@0] VPU driver version: v03
  269. [ 0.931527@0] vpu driver detect cpu type: m8m2
  270. [ 0.935902@0] load vpu_clk in dts: 364000000Hz(7)
  271. [ 0.940583@0] vpu_probe OK
  272. [ 0.943522@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
  273. [ 0.952586@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  274. [ 0.956089@0] register lm device lm-root
  275. [ 0.959736@0] register lm device lm1
  276. [ 0.963285@0] register lm device lm0
  277. [ 0.966943@0] Init pinux probe!
  278. [ 0.970551@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
  279. [ 0.975600@0] tv_init_module
  280. [ 0.978427@0] major number 254 for disp
  281. [ 0.982315@0] vout_register_server
  282. [ 0.985666@0] register tv module server ok
  283. [ 0.989914@0] major number 0 for disp
  284. [ 0.993611@0] register tv module server ok
  285. [ 0.997885@0] aml_i2c version: 20140813
  286. [ 1.001794@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed7350a8)
  287. [ 1.007663@0] aml-i2c i2c-AO: aml i2c bus driver.
  288. [ 1.012449@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ed7354a8)
  289. [ 1.018271@0] aml-i2c i2c-A: aml i2c bus driver.
  290. [ 1.022980@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ed7358a8)
  291. [ 1.028794@0] aml-i2c i2c-B: aml i2c bus driver.
  292. [ 1.033491@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ed735ca8)
  293. [ 1.039316@0] aml-i2c i2c-C: aml i2c bus driver.
  294. [ 1.043985@0] aml_pmu_init, 458
  295. [ 1.047012@0] aml_pmu4_modinit, 361
  296. [ 1.050473@0] call aml_dvfs_init in
  297. [ 1.054127@0] hdmitx: system: amhdmitx_init
  298. [ 1.058030@0] hdmitx: system: Ver: 2014May6
  299. [ 1.062264@0] hdmitx: system: amhdmitx_probe
  300. [ 1.066552@0] hdmitx: system: not find cec config
  301. [ 1.071067@0] hdmitx: system: not find vend_init_data
  302. [ 1.076149@0] hdmitx: system: gate/pwr cmd: 7
  303. [ 1.080387@0] hdmitx: system: gate/pwr cmd: 1
  304. [ 1.084684@0] hdmitx: system: hw init
  305. [ 1.088842@1] hdmitx: system: reset intr mask
  306. [ 1.124599@0] bio: create slab <bio-0> at 0
  307. [ 1.290045@0] raid6: int32x1 108 MB/s
  308. [ 1.460194@0] raid6: int32x2 166 MB/s
  309. [ 1.630321@0] raid6: int32x4 168 MB/s
  310. [ 1.800088@0] raid6: int32x8 184 MB/s
  311. [ 1.800131@0] raid6: using algorithm int32x8 (184 MB/s)
  312. [ 1.803558@0] raid6: using intx1 recovery algorithm
  313. [ 1.808670@0] SCSI subsystem initialized
  314. [ 1.812456@0] usbcore: registered new interface driver usbfs
  315. [ 1.817916@0] usbcore: registered new interface driver hub
  316. [ 1.823396@0] usbcore: registered new device driver usb
  317. [ 1.828555@0] Linux video capture interface: v2.00
  318. [ 1.836546@0] call aml_pmu_probe_init in
  319. [ 1.837175@0] aml_pmus_probe, child name:rn5t618
  320. [ 1.841700@0] aml_pmus_probe, i2c_bus:i2c_bus_ao
  321. [ 1.846495@0] board_has_battery:false
  322. [ 1.850585@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t61 8, type:ricoh_pmu
  323. [ 1.858748@0] Advanced Linux Sound Architecture Driver Initialized.
  324. [ 1.865007@0] Bluetooth: Core ver 2.16
  325. [ 1.868359@0] NET: Registered protocol family 31
  326. [ 1.872918@0] Bluetooth: HCI device and connection manager initialized
  327. [ 1.879378@0] Bluetooth: HCI socket layer initialized
  328. [ 1.884388@0] Bluetooth: L2CAP socket layer initialized
  329. [ 1.889565@0] Bluetooth: SCO socket layer initialized
  330. [ 1.894770@0] cfg80211: Calling CRDA to update world regulatory domain
  331. [ 1.902117@0] Switching to clocksource Timer-E
  332. [ 1.911090@0] NET: Registered protocol family 2
  333. [ 1.911558@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes )
  334. [ 1.917296@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  335. [ 1.923830@0] TCP: Hash tables configured (established 8192 bind 8192)
  336. [ 1.930225@0] TCP: reno registered
  337. [ 1.933542@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  338. [ 1.939615@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  339. [ 1.946251@0] NET: Registered protocol family 1
  340. [ 1.950611@0] wifi_dev_probe
  341. [ 1.953377@0] wifi_dt : interrupt_pin=GPIOX_21
  342. [ 1.957795@0] wifi_dt : irq_num=null
  343. [ 1.961311@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  344. [ 1.966412@0] wifi_dt : power_on_pin=GPIOAO_6
  345. [ 1.970714@0] wifi_dt : power_on_pin2=GPIOX_11
  346. [ 1.975115@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin= 6,clock_32k_pin=122
  347. [ 1.984060@0] Unpacking initramfs...
  348. [ 2.298242@0] Freeing initrd memory: 5040K (c4e09000 - c52f5000)
  349. [ 2.299657@0] audit: initializing netlink socket (disabled)
  350. [ 2.304168@0] type=2000 audit(2.220:1): initialized
  351. [ 2.309540@0] bounce pool size: 64 pages
  352. [ 2.317171@0] VFS: Disk quotas dquot_6.5.2
  353. [ 2.317409@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  354. [ 2.325747@0] bio: create slab <bio-1> at 1
  355. [ 2.328565@0] Running btrfs free space cache tests
  356. [ 2.332434@0] Running extent only tests
  357. [ 2.336423@0] Running bitmap only tests
  358. [ 2.340048@0] Running bitmap and extent tests
  359. [ 2.344378@0] Free space cache tests finished
  360. [ 2.348667@0] Btrfs loaded
  361. [ 2.351339@0] msgmni has been set to 1186
  362. [ 2.356562@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  363. [ 2.362877@0] io scheduler noop registered
  364. [ 2.366865@0] io scheduler deadline registered
  365. [ 2.371383@0] io scheduler cfq registered (default)
  366. [ 2.411393@0] [drm] Initialized drm 1.1.0 20060810
  367. [ 2.414424@0] loop: module loaded
  368. [ 2.414914@0] tun: Universal TUN/TAP device driver, 1.6
  369. [ 2.419034@0] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  370. [ 2.425501@0] PPP generic driver version 2.4.2
  371. [ 2.429810@0] PPP BSD Compression module registered
  372. [ 2.434537@0] PPP Deflate Compression module registered
  373. [ 2.439737@0] PPP MPPE Compression module registered
  374. [ 2.444630@0] NET: Registered protocol family 24
  375. [ 2.449279@0] usbcore: registered new interface driver asix
  376. [ 2.454779@0] usbcore: registered new interface driver ax88179_178a
  377. [ 2.460986@0] usbcore: registered new interface driver cdc_ether
  378. [ 2.466929@0] usbcore: registered new interface driver dm9601
  379. [ 2.472604@0] usbcore: registered new interface driver net1080
  380. [ 2.478396@0] usbcore: registered new interface driver cdc_subset
  381. [ 2.484424@0] usbcore: registered new interface driver zaurus
  382. [ 2.490147@0] usbcore: registered new interface driver cdc_ncm
  383. [ 2.496102@0] usbcore: registered new interface driver usb-storage
  384. [ 2.502065@0] usbcore: registered new interface driver usbserial
  385. [ 2.507987@0] usbcore: registered new interface driver usbserial_generic
  386. [ 2.514598@0] usbserial: USB Serial support registered for generic
  387. [ 2.520926@0] mousedev: PS/2 mouse device common for all mice
  388. [ 2.526707@0] i2c /dev entries driver
  389. [ 2.530422@0] usbcore: registered new interface driver uvcvideo
  390. [ 2.535897@0] USB Video Class driver (1.1.1)
  391. [ 2.540351@0] device-mapper: uevent: version 1.0.3
  392. [ 2.545075@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm [email protected]
  393. [ 2.553526@0] Bluetooth: HCI UART driver ver 2.2
  394. [ 2.557976@0] Bluetooth: HCI H4 protocol initialized
  395. [ 2.563259@0] ledtrig-cpu: registered to indicate activity on CPUs
  396. [ 2.569065@0] hidraw: raw HID events driver (C) Jiri Kosina
  397. [ 2.574715@0] usbcore: registered new interface driver usbhid
  398. [ 2.580228@0] usbhid: USB HID core driver
  399. [ 2.584604@0] zram: Created 1 device(s) ...
  400. [ 2.588470@0] vout_init_module
  401. [ 2.591387@0] start init vout module
  402. [ 2.595076@0] create vout attribute ok
  403. [ 2.599405@0] ge2d_init
  404. [ 2.601434@0] ge2d_dev major:247
  405. [ 2.604831@0] ge2d start monitor
  406. [ 2.608073@0] osd_init
  407. [ 2.608083@1] ge2d workqueue monitor start
  408. [ 2.614495@0] TV mode 480cvbs selected.
  409. [ 2.618271@0] tvoutc_setmode[452]
  410. [ 2.621527@0] mode is: 2
  411. [ 2.624028@0] VPU_VIU_VENC_MUX_CTRL: 0x5
  412. [ 2.627921@0] viu chan = 1
  413. [ 2.630582@0] VPU_VIU_VENC_MUX_CTRL: 0x5
  414. [ 2.634463@0] config HPLL
  415. [ 2.637063@0] set_hpll_clk_out[57] clk = 1296
  416. [ 2.655465@0] config HPLL done
  417. [ 3.665490@0] vdac open.0 = 0x1, 0x0
  418. [ 3.665573@0] osd_probe, vinfo:c07ccb0c
  419. [ 3.667495@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  420. [ 3.675347@0] osd_probe, mydef_var:c0b1b19c, vinfo:c07ccb0c
  421. [ 3.680889@0] init fbdev bpp is :32
  422. [ 3.684414@0] ---------------clear framebuffer0 memory
  423. [ 3.736324@0] Console: switching to colour frame buffer device 240x135
  424. [ 3.783728@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0200000, size=1024K
  425. [ 3.786290@0] osd_probe, mydef_var:c0b1b19c, vinfo:c07ccb0c
  426. [ 3.791793@0] ---------------clear framebuffer1 memory
  427. [ 3.816980@0] osd probe ok
  428. [ 3.817173@0] osd_ext_init
  429. [ 3.817535@0] vout2_init_module enter
  430. [ 3.820699@0] start init vout2 module
  431. [ 3.824486@0] create vout2 attribute ok
  432. [ 3.828993@0] amlvideo-000: V4L2 device registered as video10
  433. [ 3.834384@0] amlvideo2: V4L2 device registered as video11
  434. [ 3.839861@0] ionvideo-000: V4L2 device registered as video13
  435. [ 3.845329@0] Video Technology Magazine Ion Video Capture Board ver 1.0 succe ssfully loaded.
  436. [ 3.854090@0] aml_wdt_driver_init,301
  437. [ 3.857360@0] ** disable watchdog
  438. [ 3.860786@0] keys===========================================
  439. [ 3.866327@0] keys_devno=f400000
  440. [ 3.869607@0] securitykey: device aml_keys created
  441. [ 3.874233@0] amlkeys=0
  442. [ 3.876712@0] platform_driver_register--aml_keys_driver--------------------
  443. [ 3.883822@0] set uart_ao pinmux use pinctrl subsystem
  444. [ 3.888668@0] P_AO_RTI_PIN_MUX_REG:5860
  445. [ 3.892437@0] start uart_ao_ttyS0:(irq = 122)
  446. [ 3.896773@0] register uart_ao ok
  447. [ 3.900214@0] set uart_a pinmux use pinctrl subsystem
  448. [ 3.905027@0] P_AO_RTI_PIN_MUX_REG:5860
  449. [ 3.908862@0] start uart_a_ttyS1:(irq = 58)
  450. [ 3.912948@0] register uart_a ok
  451. [ 3.916358@0] start uart_d_ttyS4:(irq = 126)
  452. [ 3.920378@0] register uart_d ok
  453. [ 3.923637@0] dwc_otg: version 3.10a 12-MAY-2014
  454. [ 3.928209@0] dwc_otg_driver_probe NOT match
  455. [ 3.932397@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe10882 0, ctrl: fe080000
  456. [ 3.940949@0] USB (1) use clock source: XTAL input
  457. [ 3.966812@0] Core Release: 3.10a
  458. [ 3.966894@0] Setting default values for core params
  459. [ 3.969478@0] curmode: 1, host_only: 1
  460. [ 3.993337@0] Using Buffer DMA mode
  461. [ 3.993422@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  462. [ 3.995764@0] Working on port type = HOST
  463. [ 4.000703@0] dwc_otg lm1: DWC OTG Controller
  464. [ 4.004031@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  465. [ 4.010719@0] dwc_otg lm1: irq 63, io mem 0x00000000
  466. [ 4.015603@0] -------hcd->flags.d32 = 0
  467. [ 4.019397@0] Init: Port Power? op_state=1
  468. [ 4.023417@0] Init1: Power Port (0)
  469. [ 4.027388@0] hub 1-0:1.0: USB hub found
  470. [ 4.030759@0] hub 1-0:1.0: 1 port detected
  471. [ 4.035021@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe10880 0, ctrl: fe040000
  472. [ 4.043395@0] USB (0) use clock source: XTAL input
  473. [ 4.069206@0] Core Release: 3.10a
  474. [ 4.069289@0] Setting default values for core params
  475. [ 4.071860@0] curmode: 1, host_only: 0
  476. [ 4.135726@0] Using Buffer DMA mode
  477. [ 4.135813@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  478. [ 4.138121@0] Working on port type = OTG
  479. [ 4.142002@0] Current port type: SLAVE
  480. [ 4.145901@0] dwc_otg lm0: DWC OTG Controller
  481. [ 4.150041@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
  482. [ 4.156736@0] dwc_otg lm0: irq 62, io mem 0x00000000
  483. [ 4.161954@0] hub 2-0:1.0: USB hub found
  484. [ 4.165514@0] hub 2-0:1.0: 1 port detected
  485. [ 4.169641@0] Dedicated Tx FIFOs mode
  486. [ 4.173441@0] using timer detect id change, ece3b000
  487. [ 4.178262@0] ethernet_driver probe!
  488. [ 4.181594@0] Please config phy interface.
  489. [ 4.185787@0] Please config savepowermode.
  490. [ 4.189784@0] Please config reset_pin_enable.
  491. [ 4.194097@0] Please config reset_delay.
  492. [ 4.198011@0] Please config reset_pin.
  493. [ 4.201700@0] Please config used_pmu4_phy.
  494. [ 4.205774@0] ethernetinit(dbg[c0c430d0]=0)
  495. [ 4.209903@0] write mac add to:ece22a48: 00 01 23 cd ee af |..#...|
  496. [ 4.222452@0] driver is not ready right now, wait...
  497. [ 4.222579@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.99-vegas812 #2
  498. [ 4.228846@0] [<c001497c>] (unwind_backtrace+0x0/0xec) from [<c0011a38>] (sho w_stack+0x10/0x14)
  499. [ 4.228850@1] Indeed it is in host mode hprt0 = 00021501
  500. [ 4.242711@0] [<c0011a38>] (show_stack+0x10/0x14) from [<c053b1ec>] (aml1220_ write+0x58/0xb8)
  501. [ 4.251156@0] [<c053b1ec>] (aml1220_write+0x58/0xb8) from [<c04a9830>] (mdio_ read+0x24/0xdc)
  502. [ 4.259507@0] [<c04a9830>] (mdio_read+0x24/0xdc) from [<c03618a4>] (mdiobus_r ead+0x54/0x68)
  503. [ 4.267813@0] [<c03618a4>] (mdiobus_read+0x54/0x68) from [<c0361268>] (get_ph y_device+0x138/0x1a0)
  504. [ 4.276666@0] [<c0361268>] (get_phy_device+0x138/0x1a0) from [<c03616ac>] (md iobus_scan+0xc/0x44)
  505. [ 4.285443@0] [<c03616ac>] (mdiobus_scan+0xc/0x44) from [<c03617d8>] (mdiobus _register+0xf4/0x16c)
  506. [ 4.294363@0] [<c03617d8>] (mdiobus_register+0xf4/0x16c) from [<c04abe0c>] (a ml_mdio_register+0xa0/0x1a0)
  507. [ 4.303851@0] [<c04abe0c>] (aml_mdio_register+0xa0/0x1a0) from [<c04adc44>] ( ethernet_probe+0x374/0x4ac)
  508. [ 4.313238@0] [<c04adc44>] (ethernet_probe+0x374/0x4ac) from [<c032922c>] (re ally_probe+0xbc/0x1e8)
  509. [ 4.322216@0] [<c032922c>] (really_probe+0xbc/0x1e8) from [<c0329424>] (__dri ver_attach+0x74/0x98)
  510. [ 4.331086@0] [<c0329424>] (__driver_attach+0x74/0x98) from [<c0327768>] (bus _for_each_dev+0x4c/0xa0)
  511. [ 4.340240@0] [<c0327768>] (bus_for_each_dev+0x4c/0xa0) from [<c0328990>] (bu s_add_driver+0xd0/0x258)
  512. [ 4.349372@0] [<c0328990>] (bus_add_driver+0xd0/0x258) from [<c0329a78>] (dri ver_register+0xa8/0x140)
  513. [ 4.358540@0] [<c0329a78>] (driver_register+0xa8/0x140) from [<c0ab6958>] (am _net_init+0x14/0x48)
  514. [ 4.367314@0] [<c0ab6958>] (am_net_init+0x14/0x48) from [<c0008550>] (do_one_ initcall+0xa4/0x14c)
  515. [ 4.376125@0] [<c0008550>] (do_one_initcall+0xa4/0x14c) from [<c0a96c34>] (ke rnel_init_freeable+0x188/0x234)
  516. [ 4.385875@0] [<c0a96c34>] (kernel_init_freeable+0x188/0x234) from [<c0769a08 >] (kernel_init+0xc/0x154)
  517. [ 4.395141@0] [<c0769a08>] (kernel_init+0xc/0x154) from [<c000e018>] (ret_fro m_fork+0x14/0x3c)
  518. [ 4.395483@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
  519. [ 4.412176@0] driver is not ready right now, wait...
  520. [ 4.419709@1] Indeed it is in host mode hprt0 = 00001101
  521. [ 4.419747@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.99-vegas812 #2
  522. [ 4.419767@0] [<c001497c>] (unwind_backtrace+0x0/0xec) from [<c0011a38>] (sho w_stack+0x10/0x14)
  523. [ 4.419783@0] [<c0011a38>] (show_stack+0x10/0x14) from [<c053b364>] (aml1220_ read+0x64/0xb8)
  524. [ 4.419797@0] [<c053b364>] (aml1220_read+0x64/0xb8) from [<c04a983c>] (mdio_r ead+0x30/0xdc)
  525. [ 4.419811@0] [<c04a983c>] (mdio_read+0x30/0xdc) from [<c03618a4>] (mdiobus_r ead+0x54/0x68)
  526. [ 4.419823@0] [<c03618a4>] (mdiobus_read+0x54/0x68) from [<c0361268>] (get_ph y_device+0x138/0x1a0)
  527. [ 4.419835@0] [<c0361268>] (get_phy_device+0x138/0x1a0) from [<c03616ac>] (md iobus_scan+0xc/0x44)
  528. [ 4.419846@0] [<c03616ac>] (mdiobus_scan+0xc/0x44) from [<c03617d8>] (mdiobus _register+0xf4/0x16c)
  529. [ 4.419857@0] [<c03617d8>] (mdiobus_register+0xf4/0x16c) from [<c04abe0c>] (a ml_mdio_register+0xa0/0x1a0)
  530. [ 4.419869@0] [<c04abe0c>] (aml_mdio_register+0xa0/0x1a0) from [<c04adc44>] ( ethernet_probe+0x374/0x4ac)
  531. [ 4.419883@0] [<c04adc44>] (ethernet_probe+0x374/0x4ac) from [<c032922c>] (re ally_probe+0xbc/0x1e8)
  532. [ 4.419894@0] [<c032922c>] (really_probe+0xbc/0x1e8) from [<c0329424>] (__dri ver_attach+0x74/0x98)
  533. [ 4.419905@0] [<c0329424>] (__driver_attach+0x74/0x98) from [<c0327768>] (bus _for_each_dev+0x4c/0xa0)
  534. [ 4.419916@0] [<c0327768>] (bus_for_each_dev+0x4c/0xa0) from [<c0328990>] (bu s_add_driver+0xd0/0x258)
  535. [ 4.419927@0] [<c0328990>] (bus_add_driver+0xd0/0x258) from [<c0329a78>] (dri ver_register+0xa8/0x140)
  536. [ 4.419940@0] [<c0329a78>] (driver_register+0xa8/0x140) from [<c0ab6958>] (am _net_init+0x14/0x48)
  537. [ 4.419951@0] [<c0ab6958>] (am_net_init+0x14/0x48) from [<c0008550>] (do_one_ initcall+0xa4/0x14c)
  538. [ 4.419964@0] [<c0008550>] (do_one_initcall+0xa4/0x14c) from [<c0a96c34>] (ke rnel_init_freeable+0x188/0x234)
  539. [ 4.419978@0] [<c0a96c34>] (kernel_init_freeable+0x188/0x234) from [<c0769a08 >] (kernel_init+0xc/0x154)
  540. [ 4.419990@0] [<c0769a08>] (kernel_init+0xc/0x154) from [<c000e018>] (ret_fro m_fork+0x14/0x3c)
  541. [ 4.419993@0] driver is not ready right now, wait...
  542. [ 4.419998@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.99-vegas812 #2
  543. [ 4.420009@0] [<c001497c>] (unwind_backtrace+0x0/0xec) from [<c0011a38>] (sho w_stack+0x10/0x14)
  544. [ 4.420021@0] [<c0011a38>] (show_stack+0x10/0x14) from [<c053b364>] (aml1220_ read+0x64/0xb8)
  545. [ 4.420032@0] [<c053b364>] (aml1220_read+0x64/0xb8) from [<c04a9848>] (mdio_r ead+0x3c/0xdc)
  546. [ 4.420045@0] [<c04a9848>] (mdio_read+0x3c/0xdc) from [<c03618a4>] (mdiobus_r ead+0x54/0x68)
  547. [ 4.420056@0] [<c03618a4>] (mdiobus_read+0x54/0x68) from [<c0361268>] (get_ph y_device+0x138/0x1a0)
  548. [ 4.420067@0] [<c0361268>] (get_phy_device+0x138/0x1a0) from [<c03616ac>] (md iobus_scan+0xc/0x44)
  549. [ 4.420077@0] [<c03616ac>] (mdiobus_scan+0xc/0x44) from [<c03617d8>] (mdiobus _register+0xf4/0x16c)
  550. [ 4.420088@0] [<c03617d8>] (mdiobus_register+0xf4/0x16c) from [<c04abe0c>] (a ml_mdio_register+0xa0/0x1a0)
  551. [ 4.420098@0] [<c04abe0c>] (aml_mdio_register+0xa0/0x1a0) from [<c04adc44>] ( ethernet_probe+0x374/0x4ac)
  552. [ 4.420111@0] [<c04adc44>] (ethernet_probe+0x374/0x4ac) from [<c032922c>] (re ally_probe+0xbc/0x1e8)
  553. [ 4.420122@0] [<c032922c>] (really_probe+0xbc/0x1e8) from [<c0329424>] (__dri ver_attach+0x74/0x98)
  554. [ 4.420132@0] [<c0329424>] (__driver_attach+0x74/0x98) from [<c0327768>] (bus _for_each_dev+0x4c/0xa0)
  555. [ 4.420143@0] [<c0327768>] (bus_for_each_dev+0x4c/0xa0) from [<c0328990>] (bu s_add_driver+0xd0/0x258)
  556. [ 4.420153@0] [<c0328990>] (bus_add_driver+0xd0/0x258) from [<c0329a78>] (dri ver_register+0xa8/0x140)
  557. [ 4.420166@0] [<c0329a78>] (driver_register+0xa8/0x140) from [<c0ab6958>] (am _net_init+0x14/0x48)
  558. [ 4.420176@0] [<c0ab6958>] (am_net_init+0x14/0x48) from [<c0008550>] (do_one_ initcall+0xa4/0x14c)
  559. [ 4.420188@0] [<c0008550>] (do_one_initcall+0xa4/0x14c) from [<c0a96c34>] (ke rnel_init_freeable+0x188/0x234)
  560. [ 4.420199@0] [<c0a96c34>] (kernel_init_freeable+0x188/0x234) from [<c0769a08 >] (kernel_init+0xc/0x154)
  561. [ 4.420210@0] [<c0769a08>] (kernel_init+0xc/0x154) from [<c000e018>] (ret_fro m_fork+0x14/0x3c)
  562. [ 4.420243@0] driver is not ready right now, wait...
  563. [ 4.420248@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.99-vegas812 #2
  564. [ 4.420259@0] [<c001497c>] (unwind_backtrace+0x0/0xec) from [<c0011a38>] (sho w_stack+0x10/0x14)
  565. [ 4.420271@0] [<c0011a38>] (show_stack+0x10/0x14) from [<c053b1ec>] (aml1220_ write+0x58/0xb8)
  566. [ 4.420281@0] [<c053b1ec>] (aml1220_write+0x58/0xb8) from [<c04a9830>] (mdio_ read+0x24/0xdc)
  567. [ 4.420293@0] [<c04a9830>] (mdio_read+0x24/0xdc) from [<c03618a4>] (mdiobus_r ead+0x54/0x68)
  568. [ 4.420305@0] [<c03618a4>] (mdiobus_read+0x54/0x68) from [<c0361284>] (get_ph y_device+0x154/0x1a0)
  569. [ 4.420315@0] [<c0361284>] (get_phy_device+0x154/0x1a0) from [<c03616ac>] (md iobus_scan+0xc/0x44)
  570. [ 4.420326@0] [<c03616ac>] (mdiobus_scan+0xc/0x44) from [<c03617d8>] (mdiobus _register+0xf4/0x16c)
  571. [ 4.420337@0] [<c03617d8>] (mdiobus_register+0xf4/0x16c) from [<c04abe0c>] (a ml_mdio_register+0xa0/0x1a0)
  572. [ 4.420347@0] [<c04abe0c>] (aml_mdio_register+0xa0/0x1a0) from [<c04adc44>] ( ethernet_probe+0x374/0x4ac)
  573. [ 4.420359@0] [<c04adc44>] (ethernet_probe+0x374/0x4ac) from [<c032922c>] (re ally_probe+0xbc/0x1e8)
  574. [ 4.420370@0] [<c032922c>] (really_probe+0xbc/0x1e8) from [<c0329424>] (__dri ver_attach+0x74/0x98)
  575. [ 4.420380@0] [<c0329424>] (__driver_attach+0x74/0x98) from [<c0327768>] (bus _for_each_dev+0x4c/0xa0)
  576. [ 4.420391@0] [<c0327768>] (bus_for_each_dev+0x4c/0xa0) from [<c0328990>] (bu s_add_driver+0xd0/0x258)
  577. [ 4.420401@0] [<c0328990>] (bus_add_driver+0xd0/0x258) from [<c0329a78>] (dri ver_register+0xa8/0x140)
  578. [ 4.420414@0] [<c0329a78>] (driver_register+0xa8/0x140) from [<c0ab6958>] (am _net_init+0x14/0x48)
  579. [ 4.420424@0] [<c0ab6958>] (am_net_init+0x14/0x48) from [<c0008550>] (do_one_ initcall+0xa4/0x14c)
  580. [ 4.420436@0] [<c0008550>] (do_one_initcall+0xa4/0x14c) from [<c0a96c34>] (ke rnel_init_freeable+0x188/0x234)
  581. [ 4.420447@0] [<c0a96c34>] (kernel_init_freeable+0x188/0x234) from [<c0769a08 >] (kernel_init+0xc/0x154)
  582. [ 4.420458@0] [<c0769a08>] (kernel_init+0xc/0x154) from [<c000e018>] (ret_fro m_fork+0x14/0x3c)
  583. [ 4.420460@0] driver is not ready right now, wait...
  584. [ 4.420465@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.99-vegas812 #2
  585. [ 4.420476@0] [<c001497c>] (unwind_backtrace+0x0/0xec) from [<c0011a38>] (sho w_stack+0x10/0x14)
  586. [ 4.420487@0] [<c0011a38>] (show_stack+0x10/0x14) from [<c053b364>] (aml1220_ read+0x64/0xb8)
  587. [ 4.420498@0] [<c053b364>] (aml1220_read+0x64/0xb8) from [<c04a983c>] (mdio_r ead+0x30/0xdc)
  588. [ 4.420510@0] [<c04a983c>] (mdio_read+0x30/0xdc) from [<c03618a4>] (mdiobus_r ead+0x54/0x68)
  589. [ 4.420521@0] [<c03618a4>] (mdiobus_read+0x54/0x68) from [<c0361284>] (get_ph y_device+0x154/0x1a0)
  590. [ 4.420531@0] [<c0361284>] (get_phy_device+0x154/0x1a0) from [<c03616ac>] (md iobus_scan+0xc/0x44)
  591. [ 4.420542@0] [<c03616ac>] (mdiobus_scan+0xc/0x44) from [<c03617d8>] (mdiobus _register+0xf4/0x16c)
  592. [ 4.420553@0] [<c03617d8>] (mdiobus_register+0xf4/0x16c) from [<c04abe0c>] (a ml_mdio_register+0xa0/0x1a0)
  593. [ 4.420563@0] [<c04abe0c>] (aml_mdio_register+0xa0/0x1a0) from [<c04adc44>] ( ethernet_probe+0x374/0x4ac)
  594. [ 4.420575@0] [<c04adc44>] (ethernet_probe+0x374/0x4ac) from [<c032922c>] (re ally_probe+0xbc/0x1e8)
  595. [ 4.420586@0] [<c032922c>] (really_probe+0xbc/0x1e8) from [<c0329424>] (__dri ver_attach+0x74/0x98)
  596. [ 4.420597@0] [<c0329424>] (__driver_attach+0x74/0x98) from [<c0327768>] (bus _for_each_dev+0x4c/0xa0)
  597. [ 4.420607@0] [<c0327768>] (bus_for_each_dev+0x4c/0xa0) from [<c0328990>] (bu s_add_driver+0xd0/0x258)
  598. [ 4.420618@0] [<c0328990>] (bus_add_driver+0xd0/0x258) from [<c0329a78>] (dri ver_register+0xa8/0x140)
  599. [ 4.420630@0] [<c0329a78>] (driver_register+0xa8/0x140) from [<c0ab6958>] (am _net_init+0x14/0x48)
  600. [ 4.420640@0] [<c0ab6958>] (am_net_init+0x14/0x48) from [<c0008550>] (do_one_ initcall+0xa4/0x14c)
  601. [ 4.420652@0] [<c0008550>] (do_one_initcall+0xa4/0x14c) from [<c0a96c34>] (ke rnel_init_freeable+0x188/0x234)
  602. [ 4.420663@0] [<c0a96c34>] (kernel_init_freeable+0x188/0x234) from [<c0769a08 >] (kernel_init+0xc/0x154)
  603. [ 4.420674@0] [<c0769a08>] (kernel_init+0xc/0x154) from [<c000e018>] (ret_fro m_fork+0x14/0x3c)
  604. [ 4.420676@0] driver is not ready right now, wait...
  605. [ 4.420681@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.99-vegas812 #2
  606. [ 4.420692@0] [<c001497c>] (unwind_backtrace+0x0/0xec) from [<c0011a38>] (sho w_stack+0x10/0x14)
  607. [ 4.420703@0] [<c0011a38>] (show_stack+0x10/0x14) from [<c053b364>] (aml1220_ read+0x64/0xb8)
  608. [ 4.420714@0] [<c053b364>] (aml1220_read+0x64/0xb8) from [<c04a9848>] (mdio_r ead+0x3c/0xdc)
  609. [ 4.420726@0] [<c04a9848>] (mdio_read+0x3c/0xdc) from [<c03618a4>] (mdiobus_r ead+0x54/0x68)
  610. [ 4.420737@0] [<c03618a4>] (mdiobus_read+0x54/0x68) from [<c0361284>] (get_ph y_device+0x154/0x1a0)
  611. [ 4.420748@0] [<c0361284>] (get_phy_device+0x154/0x1a0) from [<c03616ac>] (md iobus_scan+0xc/0x44)
  612. [ 4.420758@0] [<c03616ac>] (mdiobus_scan+0xc/0x44) from [<c03617d8>] (mdiobus _register+0xf4/0x16c)
  613. [ 4.420769@0] [<c03617d8>] (mdiobus_register+0xf4/0x16c) from [<c04abe0c>] (a ml_mdio_register+0xa0/0x1a0)
  614. [ 4.420779@0] [<c04abe0c>] (aml_mdio_register+0xa0/0x1a0) from [<c04adc44>] ( ethernet_probe+0x374/0x4ac)
  615. [ 4.420791@0] [<c04adc44>] (ethernet_probe+0x374/0x4ac) from [<c032922c>] (re ally_probe+0xbc/0x1e8)
  616. [ 4.420802@0] [<c032922c>] (really_probe+0xbc/0x1e8) from [<c0329424>] (__dri ver_attach+0x74/0x98)
  617. [ 4.420812@0] [<c0329424>] (__driver_attach+0x74/0x98) from [<c0327768>] (bus _for_each_dev+0x4c/0xa0)
  618. [ 4.420823@0] [<c0327768>] (bus_for_each_dev+0x4c/0xa0) from [<c0328990>] (bu s_add_driver+0xd0/0x258)
  619. [ 4.420833@0] [<c0328990>] (bus_add_driver+0xd0/0x258) from [<c0329a78>] (dri ver_register+0xa8/0x140)
  620. [ 4.420846@0] [<c0329a78>] (driver_register+0xa8/0x140) from [<c0ab6958>] (am _net_init+0x14/0x48)
  621. [ 4.420856@0] [<c0ab6958>] (am_net_init+0x14/0x48) from [<c0008550>] (do_one_ initcall+0xa4/0x14c)
  622. [ 4.420867@0] [<c0008550>] (do_one_initcall+0xa4/0x14c) from [<c0a96c34>] (ke rnel_init_freeable+0x188/0x234)
  623. [ 4.420878@0] [<c0a96c34>] (kernel_init_freeable+0x188/0x234) from [<c0769a08 >] (kernel_init+0xc/0x154)
  624. [ 4.420889@0] [<c0769a08>] (kernel_init+0xc/0x154) from [<c000e018>] (ret_fro m_fork+0x14/0x3c)
  625. [ 4.437834@0] libphy: AMLMAC MII Bus: probed
  626. [ 4.437841@0] eth0: PHY ID ece4ece4 at 8 IRQ -1 (0:08) active
  627. [ 4.438692@0] Amlogic A/V streaming port init
  628. [ 5.772519@0] init vdec memsource 2045771776->2112880639
  629. [ 5.784242@0] [tsync_pcr_init]init success.
  630. [ 5.795510@0] amvideocap_init_module
  631. [ 5.806810@0] amvideocap_probe,amvideocap
  632. [ 5.817924@0] amvideocap_dev_register buf:0d200000,size:800000.
  633. [ 5.829509@0] regist mpeg12 codec profile
  634. [ 5.840633@0] regist mpeg4 codec profile
  635. [ 5.851598@0] amvdec_vc1 module init
  636. [ 5.862639@0] regist vc1 codec profile
  637. [ 5.873508@0] amvdec_h264 module init
  638. [ 5.884388@0] regist h264 codec profile
  639. [ 5.895134@0] amvdec_h264_4k2k module init
  640. [ 5.905896@0] regist h264_4k2k codec profile
  641. [ 5.916520@0] amvdec_h265 module init
  642. [ 5.927151@0] regist hevc codec profile
  643. [ 5.937727@0] regist mjpeg codec profile
  644. [ 5.948210@0] amvdec_real module init
  645. [ 5.958745@0] regist real codec profile
  646. [ 5.969156@0] amvdec_avs module init
  647. [ 5.979963@0] jpegenc module init
  648. [ 5.990646@0] picdec buffer size is 4000000
  649. [ 6.001105@0] alloc_keep_buffer keep_y_addr eca00000
  650. [ 6.011419@0] alloc_keep_buffer keep_u_addr ed000000
  651. [ 6.021641@0] alloc_keep_buffer keep_v_addr ecf80000
  652. [ 6.021721@1] hub 1-1:1.0: USB hub found
  653. [ 6.041811@0] yaddr=eca00000,u_addr=ed000000,v_addr=ecf80000
  654. [ 6.051891@1] hub 1-1:1.0: 4 ports detected
  655. [ 6.052182@0] create_ge2d_work_queue video task ok
  656. [ 6.052394@0]
  657. [ 6.052394@0]
  658. [ 6.052394@0] VECM init
  659. [ 6.052394@0]
  660. [ 6.052630@0] efuse===========================================
  661. [ 6.052738@0] efuse: device efuse created
  662. [ 6.052805@0] efuse--------------------------------------------
  663. [ 6.052807@0] SARADC Driver init.
  664. [ 6.052938@0] __saradc_probe__
  665. [ 6.195587@0] saradc calibration: ref_val = 510
  666. [ 6.205048@0] saradc calibration: ref_nominal = 512
  667. [ 6.214472@0] saradc calibration: coef = 4161
  668. [ 6.224076@0] ir irblaster probe
  669. [ 6.233485@0] Remote Driver
  670. [ 6.242824@0] Remote platform_data g_remote_base=fe600580
  671. [ 6.252094@0] set drvdata completed
  672. [ 6.261425@0] device_create_file completed
  673. [ 6.271160@0] input: aml_keypad as /devices/platform/meson-remote/input/input 0
  674. [ 6.282123@2] input_register_device completed
  675. [ 6.291338@2] [0x0] = 0x1dd0190
  676. [ 6.300371@2] [0x4] = 0xf800ca
  677. [ 6.309321@2] [0x8] = 0x82006e
  678. [ 6.318195@2] [0xc] = 0x3c0030
  679. [ 6.326997@2] [0x10] = 0x30fa0013
  680. [ 6.335745@2] [0x18] = 0x6f19000
  681. [ 6.344417@2] [0x1c] = 0x9f40
  682. [ 6.353031@2] [0x20] = 0x0
  683. [ 6.361565@2] [0x24] = 0x0
  684. [ 6.370017@2] [0x28] = 0x0
  685. [ 6.378386@2] set_remote_mode[65]
  686. [ 6.386732@2] remote config major:236
  687. [ 6.395107@2] physical address:0x2d110000
  688. [ 6.403414@2] ADC Keypad Driver init.
  689. [ 6.411739@2] ==touch_ts_init==
  690. [ 6.419997@2] ==ft5x0x_ts_init==
  691. [ 6.428109@2] ==goodix_ts_init==
  692. [ 6.436171@2] i2c-core: driver [gslx680_compatible] using legacy suspend meth od
  693. [ 6.445857@2] i2c-core: driver [gslx680_compatible] using legacy resume metho d
  694. [ 6.455412@2] !!!ntp_ts: ret = 0.
  695. [ 6.463353@2] VTL ct36x TouchScreen driver, <[email protected]>.
  696. [ 6.472109@2] i2c-core: driver [ct36x] using legacy suspend method
  697. [ 6.480561@2] i2c-core: driver [ct36x] using legacy resume method
  698. [ 6.488844@2] VTL ct36x TouchScreen driver End.
  699. [ 6.496676@2] ==gsl_ts_init==
  700. [ 6.504453@2] ret=0
  701. [ 6.512323@2] i2c-core: driver [mir3da] using legacy suspend method
  702. [ 6.520645@2] i2c-core: driver [mir3da] using legacy resume method
  703. [ 6.528841@2] i2c-core: driver [lis3dh_acc] using legacy suspend method
  704. [ 6.537410@2] i2c-core: driver [lis3dh_acc] using legacy resume method
  705. [ 6.545870@2] i2c-core: driver [bma222] using legacy suspend method
  706. [ 6.553958@2] i2c-core: driver [bma222] using legacy resume method
  707. [ 6.561966@2] i2c-core: driver [dmard06] using legacy suspend method
  708. [ 6.570048@2] i2c-core: driver [dmard06] using legacy resume method
  709. [ 6.578029@2] lsm303d driver: init
  710. [ 6.585359@2] i2c-core: driver [dmard10] using legacy suspend method
  711. [ 6.593353@2] i2c-core: driver [dmard10] using legacy resume method
  712. [ 6.601229@2] stk8313_init
  713. [ 6.608461@2] ======stk831x init ok======
  714. [ 6.615642@2] stk831x_init
  715. [ 6.622770@2] mxc622x accelerometer driver: init
  716. [ 6.629908@2] i2c-core: driver [mxc622x] using legacy suspend method
  717. [ 6.637693@2] i2c-core: driver [mxc622x] using legacy resume method
  718. [ 6.645309@2] mxc6255xc accelerometer driver: init
  719. [ 6.652332@2] i2c-core: driver [mxc6255xc] using legacy suspend method
  720. [ 6.660170@2] i2c-core: driver [mxc6255xc] using legacy resume method
  721. [ 6.667944@2] cm3217 v.1.0.0.1
  722. [ 6.674819@2] i2c-core: driver [elan_epl6814] using legacy suspend method
  723. [ 6.682829@2] i2c-core: driver [elan_epl6814] using legacy resume method
  724. [ 6.690714@2] i2c-core: driver [LTR501] using legacy suspend method
  725. [ 6.698103@2] i2c-core: driver [LTR501] using legacy resume method
  726. [ 6.705403@2] GPIO Keypad Driver init.
  727. [ 6.712162@2] ==gpio_key_probe==
  728. [ 6.718800@2] reg:2620,clearmask=400040,setmask=1
  729. [ 6.725390@2] reg:2622,clearmask=ff0000,set pin=3
  730. [ 6.731946@2] reg:2623,clearmask=7000000,setmask=7
  731. [ 6.738457@2] reg:2620,clearmask=800080,setmask=10001
  732. [ 6.744914@2] reg:2622,clearmask=ff000000,set pin=3
  733. [ 6.751330@2] reg:2623,clearmask=70000000,setmask=7
  734. [ 6.757737@2] power key(116) registed.
  735. [ 6.764171@2] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/inp ut1
  736. [ 6.772356@2] gpio keypad register input device completed.
  737. [ 6.778724@2] gpio keypad major:235
  738. [ 6.785121@2] spi_nor_init
  739. [ 6.791415@2] amlogic_spi_nor_probe:
  740. [ 6.797569@2] amlogic_spi->state_name:default
  741. [ 6.803755@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is depre cated
  742. [ 6.811841@2] check_storage_device : spi boot_device_flag : -1
  743. [ 6.818103@2] spi_nor_probe
  744. [ 6.824135@2] spi_nor_probe 629 boot_device_flag -1 : do not init spi
  745. [ 6.830962@2] spi_nor: probe of apollospi:32766 failed with error -12
  746. [ 6.837760@2] amlogic_spi_nor_probe over
  747. [ 6.843850@2] mmc driver version: 1.07, 2014-09-23: eMMC fix the SDIO data1 i nterrupt caused timeout error problem
  748. [ 6.855227@2] host->base fe108c20
  749. [ 6.861293@2] pdata->caps 7
  750. [ 6.867234@2] pdata->caps2 0
  751. [ 6.873118@2] get property: port, value:0x00000001
  752. [ 6.879903@2] get property: ocr_avail, value:0x00200000
  753. [ 6.886655@2] get property: f_min, value:0x000493e0
  754. [ 6.893363@2] get property: f_max, value:0x02faf080
  755. [ 6.900069@2] get property: max_req_size, value:0x00020000
  756. [ 6.906769@2] get property: irq_in, value:0x00000003
  757. [ 6.913434@2] get property: irq_out, value:0x00000005
  758. [ 6.920073@2] get property: gpio_cd, str:CARD_6
  759. [ 6.926195@2] get property: gpio_ro, str:GPIOZ_0
  760. [ 6.932374@2] get property: pinname, str:sd
  761. [ 6.938149@2] get property: jtag_pin, str:CARD_0
  762. [ 6.944216@2] get property: card_type, value:0x00000005
  763. [ 6.950826@2] get property: gpio_dat3, str:CARD_4
  764. [ 6.956932@2] normal card in
  765. [ 6.995495@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
  766. [ 6.995519@2] reg:2620,clearmask=80008,setmask=10001
  767. [ 6.995523@2] reg:2621,clearmask=ff000000,set pin=64
  768. [ 6.995526@2] reg:2623,clearmask=7000,setmask=7
  769. [ 6.995530@2] reg:2620,clearmask=200020,setmask=1
  770. [ 6.995533@2] reg:2622,clearmask=ff00,set pin=64
  771. [ 6.995537@2] reg:2623,clearmask=700000,setmask=7
  772. [ 7.037467@2] pdata->caps 107
  773. [ 7.043297@2] pdata->caps2 0
  774. [ 7.049115@2] get property: port, value:0x00000000
  775. [ 7.055838@2] get property: ocr_avail, value:0x00200000
  776. [ 7.062551@2] get property: f_min, value:0x000493e0
  777. [ 7.069247@2] get property: f_max, value:0x02faf080
  778. [ 7.074660@0] sd: new high speed SDHC card at address 0001, clock 35416666, 4 -bit-bus-width
  779. [ 7.084464@2] get property: max_req_size, value:0x00020000
  780. [ 7.084493@0] mmcblk0: sd:0001 00000 14.5 GiB (ro)
  781. [ 7.097132@2] get property: pinname, str:sdio
  782. [ 7.098334@0] mmcblk0: p1 p2
  783. [ 7.109225@1] get property: card_type, value:0x00000003
  784. [ 7.215463@1] [aml_sdio_probe] aml_sdio_probe() success!
  785. [ 7.223165@1] host->base fe108e00
  786. [ 7.229259@1] pdata->caps 80000547
  787. [ 7.235239@1] pdata->caps2 0
  788. [ 7.241186@1] get property: port, value:0x00000005
  789. [ 7.248052@1] get property: ocr_avail, value:0x00200000
  790. [ 7.254879@1] get property: f_min, value:0x000493e0
  791. [ 7.261731@1] get property: f_max, value:0x05f5e100
  792. [ 7.268565@1] get property: max_req_size, value:0x00020000
  793. [ 7.275378@1] get property: pinname, str:emmc
  794. [ 7.281509@1] get property: card_type, value:0x00000001
  795. [ 7.288333@1] get property: gpio_dat3, str:BOOT_3
  796. [ 7.294597@1] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=3
  797. [ 7.335500@0] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
  798. [ 7.342629@0] aml_emmc_hw_reset 1329
  799. [ 7.356399@3] mmc_init_card
  800. [ 7.395462@1] [aml_sdhc_probe] aml_sdhc_probe() success!
  801. [ 7.401554@1] [dsp]DSP start addr 0xc5e00000
  802. [ 7.407604@1] [dsp]register dsp to char divece(257)
  803. [ 7.413893@1] device name=nand_key open error
  804. [ 7.419973@1] aml_keys: version 0 can not be init c0b1fec8
  805. [ 7.426098@1] device name=emmc_key open error
  806. [ 7.432228@1] aml_keys: version 0 can not be init c0b1fec8
  807. [ 7.439113@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  808. [ 7.447524@1] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input /input2
  809. [ 7.456058@1] [RN5T618] NO BATTERY_PARAMETERS FOUND
  810. [ 7.458740@3] emmc: BKOPS_EN bit is not set
  811. [ 7.458742@3] ###check hw reset function is already enabled here
  812. [ 7.459440@3] Activate high speed
  813. [ 7.460922@3] emmc: new high speed MMC card at address 0001, clock 47222222, 8-bit-bus-width
  814. [ 7.461285@3] mmcblk1: emmc:0001 NCard 7.21 GiB
  815. [ 7.461467@3] mmcblk1boot0: emmc:0001 NCard partition 1 4.00 MiB
  816. [ 7.461640@3] mmcblk1boot1: emmc:0001 NCard partition 2 4.00 MiB
  817. [ 7.462768@3] mmcblk1: p1
  818. [ 7.463097@3] Delete invalid mbr partition part eced5800, part->partno 1
  819. [ 7.463600@3] emmc read lba=0x12000, blocks=0x1 OK!
  820. [ 7.463994@3] emmc read lba=0x12001, blocks=0x1 OK!
  821. [ 7.463999@3] [mmc_read_partition_tbl] mmc read partition OK!
  822. [ 7.464000@3] add_emmc_partition
  823. [ 7.464129@3] [mmcblk1p01] bootloader offset 0x000000000000, size 0x000000400000
  824. [ 7.464249@3] [mmcblk1p02] reserved offset 0x000002400000, size 0x000004000000
  825. [ 7.464371@3] [mmcblk1p03] cache offset 0x000006c00000, size 0x000020000000
  826. [ 7.464493@3] [mmcblk1p04] env offset 0x000027400000, size 0x000000800000
  827. [ 7.464614@3] [mmcblk1p05] logo offset 0x000028400000, size 0x000002000000
  828. [ 7.464728@3] [mmcblk1p06] recovery offset 0x00002ac00000, size 0x000002000000
  829. [ 7.464843@3] [mmcblk1p07] misc offset 0x00002d400000, size 0x000002000000
  830. [ 7.464964@3] [mmcblk1p08] boot offset 0x00002fc00000, size 0x000002000000
  831. [ 7.465094@3] [mmcblk1p09] system offset 0x000032400000, size 0x000060000000
  832. [ 7.465216@3] [mmcblk1p10] data offset 0x000092c00000, size 0x00013b500000
  833. [ 7.465240@3] card key: card_blk_probe.
  834. [ 7.465246@3] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
  835. [ 7.465250@3] i=0,register --- emmc_key
  836. [ 7.465253@3] emmc key: emmc_key_init:450 ok.
  837. [ 7.465280@3] Exit aml_emmc_partition_ops OK.
  838. [ 7.466497@3] mmcblk1boot1: p1
  839. [ 7.466514@3] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated
  840. [ 7.467857@3] mmcblk1boot0: p1
  841. [ 7.467873@3] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated
  842. [ 7.709594@1] vdin_drv_init: major 234
  843. [ 7.716295@1] vdin0 mem_start = 0x9a00000, mem_size = 0x1000000
  844. [ 7.723051@1] vdin_drv_probe: driver initialized ok
  845. [ 7.729721@1] vdin1 mem_start = 0xaa00000, mem_size = 0x1000000
  846. [ 7.736506@1] vdin_drv_probe: driver initialized ok
  847. [ 7.743118@1] amvdec_656in module: init.
  848. [ 7.749641@1] amvdec_656in_init_module:major 233
  849. [ 7.756422@1] amvdec_656in probe ok.
  850. [ 7.763174@1] amvdec_csi probe ok.
  851. [ 7.769656@1] [viuin..]viuin_init_module viuin module init
  852. [ 7.776326@1] [viuin..]viuin_probe probe ok.
  853. [ 7.783340@1] Error: Didn't get power valid value --- wifi_power_probe 323
  854. [ 7.791088@1] wifi_power power_gpio is 6
  855. [ 7.797649@1] wifi_power power_gpio2 is 123
  856. [ 7.804352@1] bcmdhd_wlan_init()
  857. [ 7.810891@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ed6d5540, size=3760
  858. [ 7.818877@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ed6d5600, size=3760
  859. [ 7.826826@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ed6d56c0, size=3760
  860. [ 7.834688@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ed6d5780, size=3760
  861. [ 7.842497@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ed6d5840, size=3760
  862. [ 7.850276@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ed6d5900, size=3760
  863. [ 7.858030@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ed6d59c0, size=3760
  864. [ 7.865767@1] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ed6d5a80, size=3760
  865. [ 7.873480@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ed6d5b40, size=7856
  866. [ 7.881145@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ed6d5c00, size=7856
  867. [ 7.888735@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ed6d5cc0, size=7856
  868. [ 7.896394@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ed6d5d80, size=7856
  869. [ 7.904002@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ed6d5e40, size=7856
  870. [ 7.911575@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ed6d5f00, size=7856
  871. [ 7.919113@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ece6c000, size=7856
  872. [ 7.926530@1] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ece6c0c0, size=7856
  873. [ 7.933843@1] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ece6c180, size=1604 8
  874. [ 7.941237@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ed6d5540, size=20504
  875. [ 7.948498@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ed6d5600, size=20504
  876. [ 7.955726@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ed6d56c0, size=81944
  877. [ 7.962937@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ed6d5780, size=163864
  878. [ 7.970242@1] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ed6d5840, size=20504
  879. [ 7.977462@1] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ec6b0000, size=65 536
  880. [ 7.985040@1] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ec700000, size=65 536
  881. [ 7.992611@1] bcmdhd_init_wlan_mem: WIFI MEM Allocated
  882. [ 7.998515@1] amlogic rfkill init
  883. [ 8.004463@1] not get gpio_en
  884. [ 8.010356@1] not get gpio_wake
  885. [ 8.045539@1] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  886. [ 8.051501@1] clock_32k_pin(122) : (null)
  887. [ 8.057471@1] clock_32k_pin(122) : sdio_wifi
  888. [ 8.166523@1] aml_hw_crypto initialization.
  889. [ 8.173318@1] enter rt5616_modinit
  890. [ 8.179383@1] dummy_codec_platform_probe
  891. [ 8.185922@1] i2s get no clk src setting in dts, use the default mpll 0
  892. [ 8.192972@1] [aml-spdif-dai]enter aml_dai_spdif_init
  893. [ 8.199025@1] [aml-spdif-dai]aml_spdif_probe
  894. [ 8.205091@1] test codec dummy_codec
  895. [ 8.211016@1] using external codec, index = 1
  896. [ 8.216979@1] using external dummy codec
  897. [ 8.223014@1] enter spdif_dit_probe
  898. [ 8.228949@1] aml_spdif_unmute
  899. [ 8.235043@1] codec_name = dummy_codec.0
  900. [ 8.241351@1] p_aml_audio->hp_disable=1
  901. [ 8.247340@1] falied to get spk event delay time paraments from dts file
  902. [ 8.254394@1] spk_event delay_time = 0
  903. [ 8.261964@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr= 2f500000, size=524288
  904. [ 8.271775@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2 f440000, size=65536
  905. [ 8.280961@1] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok
  906. [ 8.291245@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr= 2f600000, size=524288
  907. [ 8.301118@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2 f460000, size=65536
  908. [ 8.310404@1] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 m apping ok
  909. [ 8.319850@1] -----ext_codec=1---
  910. [ 8.326033@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  911. [ 8.332716@1] GACT probability NOT on
  912. [ 8.338971@1] Mirror/redirect action on
  913. [ 8.345197@1] u32 classifier
  914. [ 8.351423@1] Actions configured
  915. [ 8.357690@1] Netfilter messages via NETLINK v0.30.
  916. [ 8.364024@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  917. [ 8.371471@1] ctnetlink v0.93: registering with nfnetlink.
  918. [ 8.377923@1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  919. [ 8.385808@1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  920. [ 8.392895@1] xt_time: kernel timezone is -0000
  921. [ 8.399445@1] ipip: IPv4 over IPv4 tunneling driver
  922. [ 8.406378@1] ip_tables: (C) 2000-2006 Netfilter Core Team
  923. [ 8.412914@1] arp_tables: (C) 2002 David S. Miller
  924. [ 8.419374@1] TCP: cubic registered
  925. [ 8.426222@1] NET: Registered protocol family 10
  926. [ 8.433321@1] mip6: Mobile IPv6
  927. [ 8.439727@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
  928. [ 8.446343@1] sit: IPv6 over IPv4 tunneling driver
  929. [ 8.453595@1] NET: Registered protocol family 17
  930. [ 8.460026@1] NET: Registered protocol family 15
  931. [ 8.466465@1] Bridge firewalling registered
  932. [ 8.472891@1] Bluetooth: RFCOMM TTY layer initialized
  933. [ 8.479242@1] Bluetooth: RFCOMM socket layer initialized
  934. [ 8.485515@1] Bluetooth: RFCOMM ver 1.11
  935. [ 8.491723@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  936. [ 8.497975@1] Bluetooth: BNEP filters: protocol multicast
  937. [ 8.504183@1] Bluetooth: BNEP socket layer initialized
  938. [ 8.510344@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  939. [ 8.516885@1] Bluetooth: HIDP socket layer initialized
  940. [ 8.523004@1] l2tp_core: L2TP core driver, V2.0
  941. [ 8.529152@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  942. [ 8.535259@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  943. [ 8.541462@1] l2tp_netlink: L2TP netlink interface
  944. [ 8.547575@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  945. [ 8.554137@1] l2tp_debugfs: L2TP debugfs support
  946. [ 8.560279@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  947. [ 8.567420@1] NET: Registered protocol family 35
  948. [ 8.573992@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  949. [ 8.581738@1] Registering SWP/SWPB emulation handler
  950. [ 8.588005@1] enter meson_pm_init
  951. [ 8.594403@1] enter meson_pm_probe!
  952. [ 8.600676@1] ---meson_pm_probe----set output pin success
  953. [ 8.607008@1] meson_pm_probe done !
  954. [ 8.614251@1] aml_rtc rtc.0: setting system clock to 1990-03-22 16:41:03 UTC (638124063)
  955. [ 8.623153@1] ### dt-test ### No testcase data in device tree; not running te sts
  956. [ 8.631505@1] meson_cpufreq: no voltage_control prop
  957. [ 8.638050@1] voltage_control = 0
  958. [ 8.645563@1] <<-GTP-INFO->> GTP driver installing...
  959. [ 8.648747@1] buf[0]=f8,buf[1]=af,err=4
  960. [ 8.651773@1] M8M2:adc=383,TS_C=24,flag=1
  961. [ 8.655749@1] efuse_flag=a
  962. [ 8.658742@1] amlogic_thermal_probe, this chip is trimmed, use thermal
  963. [ 8.664884@1] amlogic-thermal aml_thermal: amlogic thermal probe start
  964. [ 8.671358@1] #thermal-cells=7
  965. [ 8.674369@1] pdata->temp_trip_count=4
  966. [ 8.678085@1] temperature=70 on trip point=0
  967. [ 8.682304@1] fixing high_freq=1608001 to 1608000 at trip point 0,level=2
  968. [ 8.689185@1] fixing low_freq=1608001 to 1608000 at trip point 0,level=2
  969. [ 8.695819@1] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
  970. [ 8.702055@1] cpu[0] core num==3
  971. [ 8.705247@1] gpu[0] core num==5
  972. [ 8.708444@1] temperature=80 on trip point=1
  973. [ 8.712664@1] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
  974. [ 8.719553@1] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
  975. [ 8.726210@1] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
  976. [ 8.732415@1] cpu[1] core num==2
  977. [ 8.735615@1] gpu[1] core num==4
  978. [ 8.738798@1] temperature=90 on trip point=2
  979. [ 8.743024@1] fixing high_freq=800001 to 696000 at trip point 2,level=11
  980. [ 8.749842@1] fixing low_freq=800001 to 696000 at trip point 2,level=11
  981. [ 8.756406@1] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
  982. [ 8.762603@1] cpu[2] core num==2
  983. [ 8.765800@1] gpu[2] core num==3
  984. [ 8.768985@1] temperature=260 on trip point=3
  985. [ 8.773297@1] fixing high_freq=-1 to -22 at trip point 3,level=-1
  986. [ 8.779834@1] fixing low_freq=-1 to -22 at trip point 3,level=-1
  987. [ 8.785804@1] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
  988. [ 8.791497@1] cpu[3] core num==-1
  989. [ 8.794774@1] gpu[3] core num==-1
  990. [ 8.798065@1] idle interval=1000
  991. [ 8.801243@1] pdata->name:aml_thermal
  992. [ 8.804986@1] tmp_trip[0].cpu_core_upper=1
  993. [ 8.808933@1] tmp_trip[1].cpu_core_upper=2
  994. [ 8.812977@1] tmp_trip[2].cpu_core_upper=2
  995. [ 8.817038@1] tmp_trip[3].cpu_core_upper=-1
  996. [ 8.821171@1] aml_thermal bind thermal-cpucore-0 okay !
  997. [ 8.826364@1] aml_thermal bind thermal-cpufreq-0 okay !
  998. [ 8.831639@1] amlogic: Kernel Thermal management registered
  999. [ 8.837045@1] amlogic-thermal aml_thermal: amlogic thermal probe done
  1000. [ 8.843465@1] hdmitx: cec: CEC init
  1001. [ 8.846917@3] hdmitx: cec: CEC task process
  1002. [ 8.846999@1] input: cec_input as /devices/virtual/input/input3
  1003. [ 8.847091@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
  1004. [ 8.847091@1] ALSA device list:
  1005. [ 8.847093@1] #0: AML-M8AUDIO
  1006. [ 8.869126@1] Freeing unused kernel memory: 248K (c0a96000 - c0ad4000)
  1007. [ 9.707859@1] [RN5T618]battery vol change: 0->0
  1008. [ 15.168009@3] force enable DISCARD here for ext4 fs
  1009. [ 15.187274@3] checked enable EXT4 DISCARD here
  1010. [ 15.190742@3] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the de vice does not support discard
  1011. [ 15.199114@3] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mod e. Opts: data=writeback
  1012. [ 15.671413@2] systemd[1]: System time before build time, advancing clock.
  1013. [ 15.712212@2] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +S ELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  1014. [ 15.728491@2] systemd[1]: Detected architecture arm.
  1015. [ 15.758203@2] systemd[1]: Set hostname to <vegas812>.
  1016. ¦¦x¦¦x¦¦¦¦x¦¦¦¦¦¦x¦¦¦x¦¦¦¦x¦¦¦¦¦x¦¦¦¦¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦¦¦¦¦x¦¦¦¦x¦¦¦¦x¦¦x¦x|¦¦¦¦ ¦¦¦¦x¦¦¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦x¦¦¦¦¦¦¦¦¦x¦¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦x|<¦¦x¦¦¦ ¦¦x|¦¦¦¦¦x¦¦¦¦x|¦¦¦¦¦x¦¦¦¦¦¦x¦¦¦¦¦x|¦¦¦¦x|¦¦¦¦¦x|¦¦x¦¦¦x|¦¦¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦x¦¦¦ ¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦¦x¦¦x¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦¦x¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦¦¦¦¦x|< ¦¦x¦x|¦¦x|¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦x|<¦¦¦¦¦¦x¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦x¦¦¦¦x|<¦¦¦¦¦¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦ ¦¦¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦¦x¦¦x¦¦¦¦x|¦¦¦¦x¦¦¦¦¦¦x¦¦¦¦¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦ ¦¦¦¦x|>¦¦x¦x|¦¦x|¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦x|¦¦¦x¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦x¦¦¦¦x|<¦¦¦¦¦¦ ¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦x|<¦¦x¦¦¦¦¦x|¦¦¦¦¦x¦¦¦¦x|¦¦¦¦¦ x|<¦¦x|¦¦¦¦¦¦¦¦¦¦¦¦¦¦x|¦¦¦¦x¦x¦¦¦x|¦¦¦¦¦¦¦¦¦¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦¦¦¦¦¦x¦¦x¦ ¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦x|<¦¦x¦¦¦¦¦x|¦¦¦¦¦x¦¦¦¦x|¦¦¦¦¦¦x¦¦¦x¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦¦ ¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦¦¦x|¦¦x¦¦¦x|¦¦¦¦¦¦¦x¦¦¦¦¦x|¦¦¦¦x|¦¦¦¦¦¦x|¦¦x¦ ¦¦¦¦x¦¦x¦¦¦¦¦x|¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦¦¦¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦¦¦x|¦¦x¦¦¦x |¦¦¦¦¦¦¦x¦¦¦¦¦x|¦¦¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦x¦¦¦¦x|¦¦¦x¦¦¦x¦¦¦¦x¦¦¦¦x|¦¦¦¦¦¦x¦¦¦¦¦¦¦x¦¦¦¦ ¦x|¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦¦¦x¦¦¦¦¦x¦¦x¦¦¦¦¦¦x|¦¦x¦¦¦¦¦¦¦x|¦¦¦x¦¦¦x¦¦¦¦¦¦¦x|¦¦¦¦x¦¦¦¦¦¦ ¦¦¦¦¦¦¦¦¦¦¦x|¦¦¦¦¦x¦¦¦¦¦x¦¦¦¦¦¦¦¦¦x|¦¦¦¦¦¦¦¦¦¦¦x¦¦¦¦¦¦¦x¦¦¦¦¦x¦¦x¦¦¦¦
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!