Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.27-desktop586-0.rc8.2mnb (pterjan@klodia.mandriva.com) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP Thu Oct 2 05:52:21 EDT 2008
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
- BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
- BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
- BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- last_pfn = 0xdff0 max_arch_pfn = 0x100000
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- kernel direct mapping tables up to dff0000 @ 7000-d000
- RAMDISK: 0d588000 - 0dfbf937
- DMI 2.2 present.
- ACPI: RSDP 000F64A0, 0014 (r0 VIAP4M)
- ACPI: RSDT 0DFF3000, 0028 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
- ACPI: FACP 0DFF3040, 0074 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
- ACPI: DSDT 0DFF30C0, 350D (r1 VIAP4M AWRDACPI 1000 MSFT 100000C)
- ACPI: FACS 0DFF0000, 0040
- 0MB HIGHMEM available.
- 223MB LOWMEM available.
- mapped low ram: 0 - 0dff0000
- low ram: 00000000 - 0dff0000
- bootmap 00002000 - 00003c00
- (9 early reservations) ==> bootmem [0000000000 - 000dff0000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- #3 [0000100000 - 0000592800] TEXT DATA BSS ==> [0000100000 - 0000592800]
- #4 [000d588000 - 000dfbf937] RAMDISK ==> [000d588000 - 000dfbf937]
- #5 [0000593000 - 0000596000] INIT_PG_TABLE ==> [0000593000 - 0000596000]
- #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
- #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x0000dff0
- HighMem 0x0000dff0 -> 0x0000dff0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000000 -> 0x000000a0
- 0: 0x00000100 -> 0x0000dff0
- On node 0 totalpages: 57232
- free_area_init_node: node 0, pgdat c049d000, node_mem_map c1000000
- DMA zone: 3968 pages, LIFO batch:0
- Normal zone: 52816 pages, LIFO batch:15
- ACPI: PM-Timer IO Port: 0x408
- SMP: Allowing 1 CPUs, 0 hotplug CPUs
- Local APIC disabled by BIOS -- you can enable it with "lapic"
- mapped APIC to ffffb000 (011c1000)
- PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- Allocating PCI resources starting at 10000000 (gap: e000000:f1ff0000)
- PERCPU: Allocating 40988 bytes of per cpu data
- NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56784
- Kernel command line: BOOT_IMAGE=alt0/vmlinuz initrd=alt0/all.rdz rescue automatic=method:cdrom vga=788
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 1024 (order: 10, 4096 bytes)
- TSC: PIT calibration confirmed by PMTIMER.
- TSC: using PIT calibration value
- Detected 1999.907 MHz processor.
- Console: colour dummy device 80x25
- console [tty0] enabled
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 211580k/229312k available (2585k kernel code, 17248k reserved, 1205k data, 364k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
- lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
- .init : 0xc04ba000 - 0xc0515000 ( 364 kB)
- .data : 0xc0386496 - 0xc04b3a00 (1205 kB)
- .text : 0xc0100000 - 0xc0386496 (2585 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- CPA: page pool initialized 1 of 1 pages preallocated
- SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.81 BogoMIPS (lpj=1999907)
- Security Framework initialized
- AppArmor: AppArmor disabled by boottime parameter
- Mount-cache hash table entries: 512
- Hook version: 2.6.27-2.3 2008/08/29
- CPU: Trace cache: 12K uops, L1 D cache: 8K
- CPU: L2 cache: 128K
- CPU: Hyper-Threading is disabled
- Intel machine check architecture supported.
- Intel machine check reporting enabled on CPU#0.
- CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
- CPU0: Thermal monitoring enabled
- Checking 'hlt' instruction... OK.
- SMP alternatives: switching to UP code
- Freeing SMP alternatives: 12k freed
- Early unpacking initramfs... done
- Freeing initrd memory: 10462k freed
- ACPI: Core revision 20080609
- ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
- ACPI: setting ELCR to 0200 (from 1e20)
- weird, boot CPU (#0) not listedby the BIOS.
- SMP motherboard not detected.
- Local APIC not detected. Using dummy APIC emulation.
- SMP disabled
- Brought up 1 CPUs
- Total of 1 processors activated (3999.81 BogoMIPS).
- CPU0 attaching sched-domain:
- domain 0: span 0 level CPU
- groups: 0
- net_namespace: 840 bytes
- Booting paravirtualized kernel on bare hardware
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xfb090, last bus=1
- PCI: Using configuration type 1 for base access
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S4 S5)
- ACPI: Using PIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI: 0000:00:00.0 reg 10 32bit mmio: [c0000000, cfffffff]
- pci 0000:00:01.0: supports D1
- PCI: 0000:00:0d.0 reg 10 io port: [d000, d0ff]
- PCI: 0000:00:0d.0 reg 14 32bit mmio: [da000000, da0000ff]
- pci 0000:00:0d.0: supports D1
- pci 0000:00:0d.0: supports D2
- pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:00:0d.0: PME# disabled
- PCI: 0000:00:11.1 reg 20 io port: [d400, d40f]
- PCI: 0000:00:11.2 reg 20 io port: [d800, d81f]
- PCI: 0000:00:11.3 reg 20 io port: [dc00, dc1f]
- PCI: 0000:00:11.5 reg 10 io port: [e000, e0ff]
- PCI: 0000:01:00.0 reg 10 32bit mmio: [d9000000, d907ffff]
- PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, d7ffffff]
- PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff]
- pci 0000:01:00.0: supports D1
- pci 0000:01:00.0: supports D2
- PCI: bridge 0000:00:01.0 32bit mmio: [d8000000, d9ffffff]
- PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, d7ffffff]
- bus 00 -> node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 11 devices
- ACPI: ACPI bus type pnp unregistered
- PnPBIOS: Disabled
- PCI: Using ACPI for IRQ routing
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- ACPI: RTC can wake from S4
- system 00:00: iomem range 0xcc000-0xcffff has been reserved
- system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
- system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
- system 00:00: iomem range 0xfc000-0xfffff could not be reserved
- system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved
- system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
- system 00:00: iomem range 0x0-0x9ffff could not be reserved
- system 00:00: iomem range 0x100000-0xdfeffff could not be reserved
- system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
- system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
- system 00:02: ioport range 0x4d0-0x4d1 has been reserved
- pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:01.0: IO window: disabled
- pci 0000:00:01.0: MEM window: 0xd8000000-0xd9ffffff
- pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
- pci 0000:00:01.0: setting latency timer to 64
- bus: 00 index 0 io port: [0, ffff]
- bus: 00 index 1 mmio: [0, ffffffffffffffff]
- bus: 01 index 0 mmio: [0, 0]
- bus: 01 index 1 mmio: [d8000000, d9ffffff]
- bus: 01 index 2 mmio: [d0000000, d7ffffff]
- bus: 01 index 3 mmio: [0, 0]
- NET: Registered protocol family 2
- IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- TCP reno registered
- NET: Registered protocol family 1
- apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
- apm: overridden by ACPI.
- audit: initializing netlink socket (disabled)
- type=2000 audit(1333381244.626:1): initialized
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 433
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- PCI: VIA PCI bridge detected.Disabling DAC.
- pci 0000:01:00.0: Boot video device
- vesafb: framebuffer at 0xd0000000, mapped to 0xce880000, using 1875k, total 31680k
- vesafb: mode is 800x600x16, linelength=1600, pages=32
- vesafb: protected mode interface info at c000:6e5d
- vesafb: pmi: set display start = c00c6ee7, set palette = c00c6f30
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- Console: switching to colour frame buffer device 100x37
- fb0: VESA VGA frame buffer device
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- brd: module loaded
- PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- serio: i8042 KBD port at 0x60,0x64 irq 1
- mice: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- cpuidle: using governor menu
- TCP cubic registered
- Using IPI No-Shortcut mode
- registered taskstats version 1
- BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
- Freeing unused kernel memory: 364k freed
- input: AT Translated Set 2 keyboard as /class/input/input0
- Switched to high resolution mode on CPU 0
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- USB Universal Host Controller Interface driver v3.0
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
- PCI: setting IRQ 5 as level-triggered
- uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
- uhci_hcd 0000:00:11.2: UHCI Host Controller
- uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
- uhci_hcd 0000:00:11.2: irq 5, io base 0x0000d800
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: UHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.27-desktop586-0.rc8.2mnb uhci_hcd
- usb usb1: SerialNumber: 0000:00:11.2
- uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
- uhci_hcd 0000:00:11.3: UHCI Host Controller
- uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:11.3: irq 5, io base 0x0000dc00
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- usb 1-1: new low speed USB device using uhci_hcd and address 2
- usb 1-1: configuration #1 chosen from 1 choice
- usb 1-1: New USB device found, idVendor=0458, idProduct=003a
- usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1: Product: Optical Mouse
- usb 1-1: Manufacturer: Genius
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.27-desktop586-0.rc8.2mnb uhci_hcd
- usb usb2: SerialNumber: 0000:00:11.3
- usbcore: registered new interface driver hiddev
- input: Genius Optical Mouse as /class/input/input1
- input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:11.2-1
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- Uniform Multi-Platform E-IDE driver
- SCSI subsystem initialized
- No dock devices found.
- libata version 3.00 loaded.
- pata_via 0000:00:11.1: version 0.3.3
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
- PCI: setting IRQ 11 as level-triggered
- pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
- pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
- scsi0 : pata_via
- scsi1 : pata_via
- ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd400 irq 14
- ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd408 irq 15
- ata2.00: HPA detected: current 78163247, native 78165360
- ata2.00: ATA-6: ST340014A, 3.06, max UDMA/100
- ata2.00: 78163247 sectors, multi 16: LBA48
- ata2.01: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
- ata2.00: configured for UDMA/100
- ata2.01: configured for UDMA/66
- scsi 1:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5
- scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
- Driver 'sr' needs updating - please use bus_type methods
- sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- Uniform CD-ROM driver Revision: 3.20
- sr 1:0:1:0: Attached scsi CD-ROM sr0
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- ISO 9660 Extensions: Microsoft Joliet Level 3
- Unable to load NLS charset iso8859-1
- Unable to load NLS charset iso8859-1
- ISO 9660 Extensions: RRIP_1991A
- loop: module loaded
- squashfs: version 3.4 (2008/08/26) Phillip Lougher
- TomoyoLinux Mandatory Access Control disabled by default.
- You need to install ccs-tools if you want to enable it.
- floppy0: no floppy controllers found
- NET: Registered protocol family 17
- SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
- SGI XFS Quota Management subsystem
- JFS: nTxBlock = 1738, nTxLock = 13907
- Driver 'sd' needs updating - please use bus_type methods
- sd 1:0:0:0: [sda] 78163247 512-byte hardware sectors (40020 MB)
- sd 1:0:0:0: [sda] Write Protect is off
- sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sd 1:0:0:0: [sda] 78163247 512-byte hardware sectors (40020 MB)
- sd 1:0:0:0: [sda] Write Protect is off
- sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3
- sd 1:0:0:0: [sda] Attached SCSI disk
- VFS: Can't find ext3 filesystem on dev sda.
- VFS: Can't find an ext2 filesystem on dev sda.
- ReiserFS: sda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda
- XFS: bad magic number
- XFS: SB validate failed
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on sda1, internal journal
- EXT3-fs: recovery complete.
- EXT3-fs: mounted filesystem with ordered data mode.
- usb 1-1: USB disconnect, address 2
- usb 1-1: new low speed USB device using uhci_hcd and address 3
- usb 1-1: configuration #1 chosen from 1 choice
- input: Genius Optical Mouse as /class/input/input2
- input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:11.2-1
- usb 1-1: New USB device found, idVendor=0458, idProduct=003a
- usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-1: Product: Optical Mouse
- usb 1-1: Manufacturer: Genius
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement