Guest User

sda (~2 y.o.)

a guest
Nov 21st, 2011
373
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.98 KB | None | 0 0
  1. smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.1.1-1-ARCH] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.11
  6. Device Model: ST31500341AS
  7. Serial Number: 9VS328FF
  8. LU WWN Device Id: 5 000c50 019f8ae02
  9. Firmware Version: CC1H
  10. User Capacity: 1 500 301 910 016 bytes [1,50 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Mon Nov 21 10:40:54 2011 MSK
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21. See vendor-specific Attribute list for marginal Attributes.
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 609) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 255) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 167950855
  61. 3 Spin_Up_Time 0x0003 095 092 000 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 516
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
  64. 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 155303604
  65. 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12322
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 265
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  70. 188 Command_Timeout 0x0032 100 090 000 Old_age Always - 328735
  71. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 115
  72. 190 Airflow_Temperature_Cel 0x0022 062 039 045 Old_age Always In_the_past 38 (12 196 40 27 0)
  73. 194 Temperature_Celsius 0x0022 038 061 000 Old_age Always - 38 (0 20 0 0 0)
  74. 195 Hardware_ECC_Recovered 0x001a 051 030 000 Old_age Always - 167950855
  75. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  76. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  77. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  78. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 254966438571930
  79. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 455547169
  80. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2437548046
  81.  
  82. SMART Error Log Version: 1
  83. No Errors Logged
  84.  
  85. SMART Self-test log structure revision number 1
  86. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  87.  
  88.  
  89. SMART Selective self-test log data structure revision number 1
  90. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  91. 1 0 0 Not_testing
  92. 2 0 0 Not_testing
  93. 3 0 0 Not_testing
  94. 4 0 0 Not_testing
  95. 5 0 0 Not_testing
  96. Selective self-test flags (0x0):
  97. After scanning selected spans, do NOT read-scan remainder of disk.
  98. If Selective self-test is pending on power-up, resume after 0 minute delay.
  99.  
  100.  
Advertisement
Add Comment
Please, Sign In to add comment