Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.16-0.bpo.3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.5-1~bpo70+1 (2014-11-02)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.3-amd64 root=UUID=fa61fd47-59b6-4e50-8e63-5f4a9ab22d2d ro quiet
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8028fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000c8029000-0x00000000c802ffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000c8030000-0x00000000c8f54fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000c8f55000-0x00000000c951bfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000c951c000-0x00000000db34dfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000db34e000-0x00000000db3d7fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000db3d8000-0x00000000db3edfff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000db3ee000-0x00000000db55bfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000db55c000-0x00000000dbffefff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.8 present.
- [ 0.000000] DMI: /DH87RL, BIOS RLH8710H.86A.0326.2014.0528.1542 05/28/2014
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
- [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
- [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
- [ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
- [ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
- [ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01af1000, 0x01af1fff] PGTABLE
- [ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
- [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
- [ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 2M
- [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
- [ 0.000000] [mem 0x41c000000-0x41fbfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
- [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8028fff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
- [ 0.000000] [mem 0xc0000000-0xc7ffffff] page 2M
- [ 0.000000] [mem 0xc8000000-0xc8028fff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0xc8030000-0xc8f54fff]
- [ 0.000000] [mem 0xc8030000-0xc81fffff] page 4k
- [ 0.000000] [mem 0xc8200000-0xc8dfffff] page 2M
- [ 0.000000] [mem 0xc8e00000-0xc8f54fff] page 4k
- [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0xc951c000-0xdb34dfff]
- [ 0.000000] [mem 0xc951c000-0xc95fffff] page 4k
- [ 0.000000] [mem 0xc9600000-0xdb1fffff] page 2M
- [ 0.000000] [mem 0xdb200000-0xdb34dfff] page 4k
- [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0xdbfff000-0xdbffffff]
- [ 0.000000] [mem 0xdbfff000-0xdbffffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
- [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
- [ 0.000000] RAMDISK: [mem 0x37a60000-0x37d27fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 INTEL )
- [ 0.000000] ACPI: XSDT 0x00000000DB3DC078 000074 (v01 INTEL DH87RL 00000146 AMI 00010013)
- [ 0.000000] ACPI: FACP 0x00000000DB3E8BD0 00010C (v05 INTEL DH87RL 00000146 AMI 00010013)
- [ 0.000000] ACPI: DSDT 0x00000000DB3DC180 00CA50 (v02 INTEL DH87RL 00000146 INTL 20120711)
- [ 0.000000] ACPI: FACS 0x00000000DB55A080 000040
- [ 0.000000] ACPI: APIC 0x00000000DB3E8CE0 000062 (v03 INTEL DH87RL 00000146 AMI 00010013)
- [ 0.000000] ACPI: FPDT 0x00000000DB3E8D48 000044 (v01 INTEL DH87RL 00000146 AMI 00010013)
- [ 0.000000] ACPI: SSDT 0x00000000DB3E8D90 000539 (v01 INTEL DH87RL 00000146 INTL 20120711)
- [ 0.000000] ACPI: SSDT 0x00000000DB3E92D0 000AD8 (v01 INTEL DH87RL 00000146 INTL 20120711)
- [ 0.000000] ACPI: SSDT 0x00000000DB3E9DA8 0001C7 (v01 INTEL DH87RL 00000146 INTL 20120711)
- [ 0.000000] ACPI: MCFG 0x00000000DB3E9F70 00003C (v01 INTEL DH87RL 00000146 MSFT 00000097)
- [ 0.000000] ACPI: HPET 0x00000000DB3E9FB0 000038 (v01 INTEL DH87RL 00000146 AMI. 00000005)
- [ 0.000000] ACPI: SSDT 0x00000000DB3E9FE8 00036D (v01 INTEL DH87RL 00000146 INTL 20120711)
- [ 0.000000] ACPI: SSDT 0x00000000DB3EA358 0030DF (v01 INTEL DH87RL 00000146 INTL 20091112)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
- [ 0.000000] NODE_DATA [mem 0x41fdf7000-0x41fdfbfff]
- [ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x41fdfffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0xc8028fff]
- [ 0.000000] node 0: [mem 0xc8030000-0xc8f54fff]
- [ 0.000000] node 0: [mem 0xc951c000-0xdb34dfff]
- [ 0.000000] node 0: [mem 0xdbfff000-0xdbffffff]
- [ 0.000000] node 0: [mem 0x100000000-0x41fdfffff]
- [ 0.000000] On node 0 totalpages: 4172573
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 12200 pages used for memmap
- [ 0.000000] DMA32 zone: 892289 pages, LIFO batch:31
- [ 0.000000] Normal zone: 44793 pages used for memmap
- [ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
- [ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xc8029000-0xc802ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xc8f55000-0xc951bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdb34e000-0xdb3d7fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdb3d8000-0xdb3edfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdb3ee000-0xdb55bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdb55c000-0xdbffefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041fa00000 s85696 r8192 d20800 u1048576
- [ 0.000000] pcpu-alloc: s85696 r8192 d20800 u1048576 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115503
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.3-amd64 root=UUID=fa61fd47-59b6-4e50-8e63-5f4a9ab22d2d ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
- [ 0.000000] AGP: Checking aperture...
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 16378140K/16690292K available (5426K kernel code, 936K rwdata, 1824K rodata, 1204K init, 840K bss, 312152K reserved)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:33024 nr_irqs:512 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2992.945 MHz processor
- [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.89 BogoMIPS (lpj=11971780)
- [ 0.000024] pid_max: default: 32768 minimum: 301
- [ 0.000030] ACPI: Core revision 20140424
- [ 0.008462] ACPI: All ACPI Tables successfully acquired
- [ 0.008851] Security Framework initialized
- [ 0.008857] AppArmor: AppArmor disabled by boot time parameter
- [ 0.008858] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.009577] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.011959] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.012898] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.012912] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.013127] Initializing cgroup subsys memory
- [ 0.013131] Initializing cgroup subsys devices
- [ 0.013137] Initializing cgroup subsys freezer
- [ 0.013139] Initializing cgroup subsys net_cls
- [ 0.013142] Initializing cgroup subsys blkio
- [ 0.013144] Initializing cgroup subsys perf_event
- [ 0.013146] Initializing cgroup subsys net_prio
- [ 0.013167] CPU: Physical Processor ID: 0
- [ 0.013167] CPU: Processor Core ID: 0
- [ 0.013171] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.013171] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.013955] mce: CPU supports 7 MCE banks
- [ 0.013964] CPU0: Thermal monitoring enabled (TM1)
- [ 0.013973] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
- [ 0.013973] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
- [ 0.013973] tlb_flushall_shift: 6
- [ 0.014051] Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000)
- [ 0.014739] ftrace: allocating 21544 entries in 85 pages
- [ 0.021598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.061266] smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (fam: 06, model: 3c, stepping: 03)
- [ 0.061277] TSC deadline timer enabled
- [ 0.061297] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
- [ 0.061312] ... version: 3
- [ 0.061313] ... bit width: 48
- [ 0.061313] ... generic registers: 8
- [ 0.061314] ... value mask: 0000ffffffffffff
- [ 0.061315] ... max period: 0000ffffffffffff
- [ 0.061315] ... fixed-purpose events: 3
- [ 0.061316] ... event mask: 00000007000000ff
- [ 0.062431] x86: Booting SMP configuration:
- [ 0.062433] .... node #0, CPUs: #1
- [ 0.076372] x86: Booted up 1 node, 2 CPUs
- [ 0.076375] smpboot: Total of 2 processors activated (11971.78 BogoMIPS)
- [ 0.076442] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.077734] devtmpfs: initialized
- [ 0.081159] PM: Registering ACPI NVS region [mem 0xc8029000-0xc802ffff] (28672 bytes)
- [ 0.081161] PM: Registering ACPI NVS region [mem 0xdb3ee000-0xdb55bfff] (1499136 bytes)
- [ 0.081778] pinctrl core: initialized pinctrl subsystem
- [ 0.081835] NET: Registered protocol family 16
- [ 0.081923] cpuidle: using governor ladder
- [ 0.081925] cpuidle: using governor menu
- [ 0.081959] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.081961] ACPI: bus type PCI registered
- [ 0.081962] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.082026] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.082027] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.082087] PCI: Using configuration type 1 for base access
- [ 0.092654] ACPI: Added _OSI(Module Device)
- [ 0.092656] ACPI: Added _OSI(Processor Device)
- [ 0.092657] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.092657] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.095229] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.097176] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.105709] ACPI: Dynamic OEM Table Load:
- [ 0.105714] ACPI: SSDT 0xFFFF88040EC0C400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
- [ 0.116585] ACPI: Dynamic OEM Table Load:
- [ 0.116589] ACPI: SSDT 0xFFFF88040EC12800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
- [ 0.128488] ACPI: Dynamic OEM Table Load:
- [ 0.128491] ACPI: SSDT 0xFFFF88041F005000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
- [ 0.140625] ACPI: Interpreter enabled
- [ 0.140630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
- [ 0.140634] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
- [ 0.140646] ACPI: (supports S0 S3 S4 S5)
- [ 0.140647] ACPI: Using IOAPIC for interrupt routing
- [ 0.140667] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.146743] ACPI: Power Resource [FN00] (off)
- [ 0.146801] ACPI: Power Resource [FN01] (off)
- [ 0.146855] ACPI: Power Resource [FN02] (off)
- [ 0.146909] ACPI: Power Resource [FN03] (off)
- [ 0.146962] ACPI: Power Resource [FN04] (off)
- [ 0.147519] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.147523] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.147699] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
- [ 0.147794] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
- [ 0.148206] PCI host bridge to bus 0000:00
- [ 0.148208] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.148210] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.148211] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.148212] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.148213] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- [ 0.148215] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- [ 0.148216] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- [ 0.148217] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- [ 0.148218] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- [ 0.148219] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- [ 0.148220] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
- [ 0.148225] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
- [ 0.148299] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
- [ 0.148308] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
- [ 0.148312] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.148316] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 0.148399] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.148416] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
- [ 0.148471] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.148498] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.148536] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.148553] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b00f 64bit]
- [ 0.148608] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.148673] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
- [ 0.148689] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
- [ 0.148696] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff]
- [ 0.148703] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
- [ 0.148754] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.148782] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 0.148820] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.148838] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff]
- [ 0.148916] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.148960] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.148996] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 0.149010] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
- [ 0.149070] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.149099] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.149139] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.149157] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff]
- [ 0.149235] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.149276] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.149314] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
- [ 0.149458] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
- [ 0.149471] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
- [ 0.149477] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
- [ 0.149483] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
- [ 0.149490] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
- [ 0.149496] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
- [ 0.149503] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff]
- [ 0.149535] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.149591] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.149603] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit]
- [ 0.149620] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
- [ 0.149682] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
- [ 0.150279] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.150330] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.150376] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- [ 0.150424] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.150462] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.150501] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.150549] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.150591] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
- [ 0.150815] ACPI: Enabled 4 GPEs in block 00 to 3F
- [ 0.150900] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 0.150902] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.150903] vgaarb: loaded
- [ 0.150904] vgaarb: bridge control possible 0000:00:02.0
- [ 0.150946] PCI: Using ACPI for IRQ routing
- [ 0.152233] PCI: pci_cache_line_size set to 64 bytes
- [ 0.152268] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.152269] e820: reserve RAM buffer [mem 0xc8029000-0xcbffffff]
- [ 0.152270] e820: reserve RAM buffer [mem 0xc8f55000-0xcbffffff]
- [ 0.152271] e820: reserve RAM buffer [mem 0xdb34e000-0xdbffffff]
- [ 0.152272] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
- [ 0.152376] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.152379] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.154407] Switched to clocksource hpet
- [ 0.158301] pnp: PnP ACPI init
- [ 0.158312] ACPI: bus type PNP registered
- [ 0.158371] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- [ 0.158373] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.158518] system 00:01: [io 0x0680-0x069f] has been reserved
- [ 0.158519] system 00:01: [io 0xffff] has been reserved
- [ 0.158520] system 00:01: [io 0xffff] has been reserved
- [ 0.158521] system 00:01: [io 0xffff] has been reserved
- [ 0.158523] system 00:01: [io 0x1c00-0x1cfe] has been reserved
- [ 0.158524] system 00:01: [io 0x1d00-0x1dfe] has been reserved
- [ 0.158525] system 00:01: [io 0x1e00-0x1efe] has been reserved
- [ 0.158526] system 00:01: [io 0x1f00-0x1ffe] has been reserved
- [ 0.158528] system 00:01: [io 0x1800-0x18fe] could not be reserved
- [ 0.158529] system 00:01: [io 0x164e-0x164f] has been reserved
- [ 0.158530] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.158558] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.158590] system 00:03: [io 0x1854-0x1857] has been reserved
- [ 0.158592] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.158662] system 00:04: [io 0x0a00-0x0a1f] has been reserved
- [ 0.158664] system 00:04: [io 0x0a20-0x0a23] has been reserved
- [ 0.158665] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.158740] system 00:05: [io 0x04d0-0x04d1] has been reserved
- [ 0.158742] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.159117] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.159119] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.159120] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.159121] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.159123] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.159124] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.159125] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.159127] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.159128] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.159130] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.159131] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved
- [ 0.159132] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
- [ 0.159133] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.159327] pnp: PnP ACPI: found 7 devices
- [ 0.159328] ACPI: bus type PNP unregistered
- [ 0.165665] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.165666] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.165667] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.165668] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- [ 0.165669] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- [ 0.165670] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- [ 0.165671] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- [ 0.165672] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
- [ 0.165673] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
- [ 0.165674] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
- [ 0.165709] NET: Registered protocol family 2
- [ 0.165896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.166051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.166161] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.166174] TCP: reno registered
- [ 0.166188] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.166228] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.166306] NET: Registered protocol family 1
- [ 0.166319] pci 0000:00:02.0: Video device with shadowed ROM
- [ 0.202474] PCI: CLS 64 bytes, default 64
- [ 0.202506] Unpacking initramfs...
- [ 0.238534] Freeing initrd memory: 2848K (ffff880037a60000 - ffff880037d28000)
- [ 0.238546] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.238548] software IO TLB [mem 0xd734e000-0xdb34e000] (64MB) mapped at [ffff8800d734e000-ffff8800db34dfff]
- [ 0.238703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
- [ 0.238733] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x16
- [ 0.238745] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x16
- [ 0.238791] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.238992] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.239020] audit: initializing netlink subsys (disabled)
- [ 0.239034] audit: type=2000 audit(1416120560.240:1): initialized
- [ 0.239283] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.239302] zbud: loaded
- [ 0.239442] VFS: Disk quotas dquot_6.5.2
- [ 0.239457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.239496] msgmni has been set to 31994
- [ 0.239756] alg: No test for stdrng (krng)
- [ 0.239779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.239809] io scheduler noop registered
- [ 0.239811] io scheduler deadline registered
- [ 0.239839] io scheduler cfq registered (default)
- [ 0.239907] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.239919] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.239954] intel_idle: MWAIT substates: 0x2120
- [ 0.239955] intel_idle: v0.4 model 0x3C
- [ 0.239956] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.240053] GHES: HEST is not enabled!
- [ 0.240116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.240496] Linux agpgart interface v0.103
- [ 0.240569] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.243103] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.243106] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.243214] mousedev: PS/2 mouse device common for all mice
- [ 0.243254] rtc_cmos 00:02: RTC can wake from S4
- [ 0.243372] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 0.243401] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.243409] Intel P-state driver initializing.
- [ 0.243417] Intel pstate controlling: cpu 0
- [ 0.243449] Intel pstate controlling: cpu 1
- [ 0.243522] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.244459] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
- [ 0.244462] AMD IOMMUv2 functionality not available on this system
- [ 0.244677] TCP: cubic registered
- [ 0.244851] NET: Registered protocol family 10
- [ 0.245325] mip6: Mobile IPv6
- [ 0.245337] NET: Registered protocol family 17
- [ 0.245349] mpls_gso: MPLS GSO support
- [ 0.246017] registered taskstats version 1
- [ 0.246771] rtc_cmos 00:02: setting system clock to 2014-11-16 06:49:20 UTC (1416120560)
- [ 0.246978] PM: Hibernation image not present or could not be loaded.
- [ 0.249310] Freeing unused kernel memory: 1204K (ffffffff818eb000 - ffffffff81a18000)
- [ 0.249313] Write protecting the kernel read-only data: 8192k
- [ 0.251240] Freeing unused kernel memory: 708K (ffff88000154f000 - ffff880001600000)
- [ 0.251606] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
- [ 0.258258] udevd[59]: starting version 175
- [ 0.275157] ACPI: Fan [FAN0] (off)
- [ 0.275186] ACPI: Fan [FAN1] (off)
- [ 0.275208] ACPI: Fan [FAN2] (off)
- [ 0.275232] ACPI: Fan [FAN3] (off)
- [ 0.275252] ACPI: Fan [FAN4] (off)
- [ 0.277513] SCSI subsystem initialized
- [ 0.287885] libata version 3.00 loaded.
- [ 0.288310] ahci 0000:00:1f.2: version 3.0
- [ 0.288430] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
- [ 0.288466] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x20 impl SATA mode
- [ 0.288468] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 0.288975] scsi0 : ahci
- [ 0.289051] scsi1 : ahci
- [ 0.296104] scsi2 : ahci
- [ 0.308453] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.308456] ACPI: Thermal Zone [TZ00] (28 C)
- [ 0.308483] scsi3 : ahci
- [ 0.308583] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.308584] ACPI: Thermal Zone [TZ01] (30 C)
- [ 0.309989] scsi4 : ahci
- [ 0.310062] scsi5 : ahci
- [ 0.310095] ata1: DUMMY
- [ 0.310097] ata2: DUMMY
- [ 0.310098] ata3: DUMMY
- [ 0.310098] ata4: DUMMY
- [ 0.310099] ata5: DUMMY
- [ 0.310105] ata6: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36380 irq 40
- [ 0.626299] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 0.626936] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 0.626939] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 0.626940] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 0.627632] ata6.00: ATA-8: KINGSTON SMS100S264G, S5FAM014, max UDMA/100
- [ 0.627635] ata6.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 0.628375] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 0.628378] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 0.628379] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 0.629024] ata6.00: configured for UDMA/100
- [ 0.629188] scsi 5:0:0:0: Direct-Access ATA KINGSTON SMS100S M014 PQ: 0 ANSI: 5
- [ 0.633121] sd 5:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
- [ 0.633193] sd 5:0:0:0: [sda] Write Protect is off
- [ 0.633196] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.633222] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.634140] sda: sda1 sda2 sda3
- [ 0.634429] sd 5:0:0:0: [sda] Attached SCSI disk
- [ 0.777733] PM: Starting manual resume from disk
- [ 0.777739] PM: Hibernation image partition 8:3 present
- [ 0.777741] PM: Looking for hibernation image.
- [ 0.778231] PM: Image not found (code -22)
- [ 0.778235] PM: Hibernation image not present or could not be loaded.
- [ 0.789771] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.057517] udevd[404]: starting version 175
- [ 1.155208] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 1.155213] ACPI: Power Button [PWRB]
- [ 1.155256] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 1.155257] ACPI: Power Button [PWRF]
- [ 1.196339] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
- [ 1.196344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 1.200234] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
- [ 1.208415] ACPI: bus type USB registered
- [ 1.208437] usbcore: registered new interface driver usbfs
- [ 1.208444] usbcore: registered new interface driver hub
- [ 1.208756] usbcore: registered new device driver usb
- [ 1.209190] pps_core: LinuxPPS API ver. 1 registered
- [ 1.209192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.212497] PTP clock support registered
- [ 1.214575] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 1.214581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- [ 1.214667] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 1.214686] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
- [ 1.214792] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.214794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.214795] usb usb1: Product: xHCI Host Controller
- [ 1.214796] usb usb1: Manufacturer: Linux 3.16-0.bpo.3-amd64 xhci_hcd
- [ 1.214797] usb usb1: SerialNumber: 0000:00:14.0
- [ 1.214899] hub 1-0:1.0: USB hub found
- [ 1.214914] hub 1-0:1.0: 14 ports detected
- [ 1.218557] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 1.218561] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 1.218596] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.218597] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.218598] usb usb2: Product: xHCI Host Controller
- [ 1.218599] usb usb2: Manufacturer: Linux 3.16-0.bpo.3-amd64 xhci_hcd
- [ 1.218600] usb usb2: SerialNumber: 0000:00:14.0
- [ 1.218685] hub 2-0:1.0: USB hub found
- [ 1.218696] hub 2-0:1.0: 6 ports detected
- [ 1.223679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.228919] input: PC Speaker as /devices/platform/pcspkr/input/input4
- [ 1.233282] iTCO_vendor_support: vendor-support=0
- [ 1.235753] ehci-pci: EHCI PCI platform driver
- [ 1.235869] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 1.235874] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 1.235891] ehci-pci 0000:00:1a.0: debug port 2
- [ 1.238026] tsc: Refined TSC clocksource calibration: 2993.086 MHz
- [ 1.239806] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.239819] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000
- [ 1.244474] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 1.244498] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
- [ 1.244561] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 1.250027] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.250088] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.250090] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.250091] usb usb3: Product: EHCI Host Controller
- [ 1.250093] usb usb3: Manufacturer: Linux 3.16-0.bpo.3-amd64 ehci_hcd
- [ 1.250094] usb usb3: SerialNumber: 0000:00:1a.0
- [ 1.250186] hub 3-0:1.0: USB hub found
- [ 1.250190] hub 3-0:1.0: 2 ports detected
- [ 1.250380] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 1.250385] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
- [ 1.250395] ehci-pci 0000:00:1d.0: debug port 2
- [ 1.254298] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.254322] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000
- [ 1.261305] [drm] Initialized drm 1.1.0 20060810
- [ 1.265333] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 1.265335] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
- [ 1.266024] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.266053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.266055] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.266056] usb usb4: Product: EHCI Host Controller
- [ 1.266057] usb usb4: Manufacturer: Linux 3.16-0.bpo.3-amd64 ehci_hcd
- [ 1.266058] usb usb4: SerialNumber: 0000:00:1d.0
- [ 1.266167] hub 4-0:1.0: USB hub found
- [ 1.266170] hub 4-0:1.0: 2 ports detected
- [ 1.266398] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.266417] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
- [ 1.270988] alg: No test for crc32 (crc32-pclmul)
- [ 1.439223] e1000e 0000:00:19.0 eth0: registered PHC clock
- [ 1.439225] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:ae:2c:a5
- [ 1.439227] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 1.439275] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
- [ 1.439575] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
- [ 1.439920] [drm] Memory usable by graphics device = 2048M
- [ 1.439922] [drm] Replacing VGA console driver
- [ 1.441001] Console: switching to colour dummy device 80x25
- [ 1.455004] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x18/0x0) type:line
- [ 1.455007] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 1.455008] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 1.455009] sound hdaudioC0D2: mono: mono_out=0x0
- [ 1.455010] sound hdaudioC0D2: dig-out=0x11/0x1e
- [ 1.455011] sound hdaudioC0D2: inputs:
- [ 1.455012] sound hdaudioC0D2: Mic=0x19
- [ 1.455013] sound hdaudioC0D2: Line=0x1a
- [ 1.462001] i915 0000:00:02.0: irq 45 for MSI/MSI-X
- [ 1.462011] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.462012] [drm] Driver supports precise vblank timestamp query.
- [ 1.462033] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 1.467075] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
- [ 1.467208] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
- [ 1.467243] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- [ 1.467286] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- [ 1.467321] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- [ 1.467357] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 1.530026] usb 1-6: new full-speed USB device number 2 using xhci_hcd
- [ 1.660254] usb 1-6: New USB device found, idVendor=046d, idProduct=c52b
- [ 1.660256] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.660257] usb 1-6: Product: USB Receiver
- [ 1.660258] usb 1-6: Manufacturer: Logitech
- [ 1.785460] fbcon: inteldrmfb (fb0) is primary device
- [ 1.799368] Console: switching to colour frame buffer device 240x67
- [ 1.802538] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 1.802540] i915 0000:00:02.0: registered panic notifier
- [ 1.825871] usb 1-8: new low-speed USB device number 3 using xhci_hcd
- [ 1.838669] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 1.838981] acpi device:5e: registered as cooling_device8
- [ 1.839037] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
- [ 1.839085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 1.957954] usb 1-8: New USB device found, idVendor=13ba, idProduct=0018
- [ 1.957960] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 1.957964] usb 1-8: Product: Barcode Reader
- [ 2.069878] usb 3-1: new high-speed USB device number 2 using ehci-pci
- [ 2.202201] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
- [ 2.202207] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.202643] hub 3-1:1.0: USB hub found
- [ 2.202801] hub 3-1:1.0: 6 ports detected
- [ 2.218333] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.230348] usbcore: registered new interface driver usbhid
- [ 2.230352] usbhid: USB HID core driver
- [ 2.234762] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
- [ 2.237792] Switched to clocksource tsc
- [ 2.291941] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input13
- [ 2.292055] logitech-djdevice 0003:046D:C52B.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:14.0-6:1
- [ 2.295622] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0003/0003:046D:C52B.0007/input/input14
- [ 2.296118] logitech-djdevice 0003:046D:C52B.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:14.0-6:2
- [ 2.313720] usb 4-1: new high-speed USB device number 2 using ehci-pci
- [ 2.446397] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
- [ 2.446402] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.446766] hub 4-1:1.0: USB hub found
- [ 2.446801] hub 4-1:1.0: 8 ports detected
- [ 2.452813] input: Barcode Reader as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:13BA:0018.0004/input/input15
- [ 2.452912] hid-generic 0003:13BA:0018.0004: input,hidraw3: USB HID v1.10 Keyboard [Barcode Reader ] on usb-0000:00:14.0-8/input0
- [ 2.453073] input: Barcode Reader as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:13BA:0018.0005/input/input16
- [ 2.453176] hid-generic 0003:13BA:0018.0005: input,hidraw4: USB HID v1.10 Mouse [Barcode Reader ] on usb-0000:00:14.0-8/input1
- [ 2.627413] Adding 1975292k swap on /dev/sda3. Priority:-1 extents:1 across:1975292k SSFS
- [ 2.633799] EXT4-fs (sda1): re-mounted. Opts: (null)
- [ 2.695581] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 2.712675] loop: module loaded
- [ 2.801576] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 2.941791] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.007537] random: dd urandom read with 115 bits of entropy available
- [ 3.273364] random: nonblocking pool is initialized
- [ 3.649302] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
- [ 3.753182] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
- [ 3.753274] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 6.461996] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
- [ 6.462033] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 1208.455995] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
- [ 1239.396055] chromium[2964]: segfault at c ip 00007fef83bd1d90 sp 00007ffffd183098 error 4 in libxcb-glx.so.0.0.0[7fef83bc3000+16000]
- [46354.515120] perf interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement