Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.7.10 (guenther@MSI-Wind-U100) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Mon Jun 10 12:53:04 CEST 2013
- [ 0.000000] prom: fw_arg0=00000001, fw_arg1=01f57fb0, fw_arg2=01f583b0, fw_arg3=00000000
- [ 0.000000] env[0]: memsize=32
- [ 0.000000] env[1]: initrd_start=0x00000000
- [ 0.000000] env[2]: initrd_size=0x0
- [ 0.000000] env[3]: flash_start=0xBFC00000
- [ 0.000000] env[4]: flash_size=0x400000
- [ 0.000000] env[0]: memsize=32
- [ 0.000000] env[1]: initrd_start=0x00000000
- [ 0.000000] env[2]: initrd_size=0x0
- [ 0.000000] env[3]: flash_start=0xBFC00000
- [ 0.000000] env[4]: flash_size=0x400000
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
- [ 0.000000] Ralink RT3052 id:1 rev:2 running at 320.00 MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 02000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
- [ 0.000000] On node 0 totalpages: 8192
- [ 0.000000] free_area_init_node: node 0, pgdat 80233c70, node_mem_map 81000000
- [ 0.000000] Normal zone: 64 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 8128 pages, LIFO batch:0
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- [ 0.000000] Kernel command line: board=3G-6200N console=ttyS1,57600 mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware) rootfstype=squashfs,jffs2
- [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
- [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Writing ErrCtl register=0000c020
- [ 0.000000] Readback ErrCtl register=0000c020
- [ 0.000000] Memory: 29760k/32768k available (1973k kernel code, 3008k reserved, 333k data, 188k init, 0k highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:48
- [ 0.000000] console [ttyS1] enabled, bootconsole disabled
- [ 0.010000] Calibrating delay loop... 212.58 BogoMIPS (lpj=1062912)
- [ 0.090000] pid_max: default: 32768 minimum: 301
- [ 0.090000] Mount-cache hash table entries: 512
- [ 0.100000] NET: Registered protocol family 16
- [ 0.110000] MIPS: machine is Edimax 3g-6200n
- [ 0.140000] bio: create slab <bio-0> at 0
- [ 0.150000] Switching to clocksource MIPS
- [ 0.160000] NET: Registered protocol family 2
- [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 0.190000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.210000] TCP: reno registered
- [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.250000] NET: Registered protocol family 1
- [ 0.300000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.310000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.330000] msgmni has been set to 58
- [ 0.340000] io scheduler noop registered
- [ 0.350000] io scheduler deadline registered (default)
- [ 0.360000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.370000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
- [ 0.390000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
- [ 0.410000] physmap platform flash device: 00800000 at bf000000
- [ 0.420000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a8
- [ 0.440000] physmap-flash.0: Found an alias at 0x400000 for the chip at 0x0
- [ 0.440000] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.450000] Amd/Fujitsu Extended Query version 1.1.
- [ 0.460000] number of CFI chips: 1
- [ 0.470000] 7 cmdlinepart partitions found on MTD device physmap-flash.0
- [ 0.480000] Creating 7 MTD partitions on "physmap-flash.0":
- [ 0.490000] 0x000000000000-0x000000030000 : "u-boot"
- [ 0.510000] 0x000000030000-0x000000040000 : "u-boot-env"
- [ 0.520000] 0x000000040000-0x000000050000 : "factory"
- [ 0.540000] 0x000000050000-0x000000130000 : "kernel"
- [ 0.550000] 0x000000130000-0x0000003e0000 : "rootfs"
- [ 0.570000] mtd: partition "rootfs" set to be root filesystem
- [ 0.580000] mtd: partition "rootfs_data" created automatically, ofs=380000, len=60000
- [ 0.590000] 0x000000380000-0x0000003e0000 : "rootfs_data"
- [ 0.610000] 0x0000003e0000-0x000000400000 : "cimage"
- [ 0.620000] 0x000000050000-0x0000003e0000 : "firmware"
- [ 0.650000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 40, using 40
- [ 0.670000] TCP: cubic registered
- [ 0.670000] NET: Registered protocol family 17
- [ 0.680000] 8021q: 802.1Q VLAN Support v1.8
- [ 0.700000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
- [ 0.720000] Freeing unused kernel memory: 188k freed
- [ 3.620000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
- [ 3.700000] Button Hotplug driver version 0.4.1
- [ 3.870000] Registered led device: edimax:green:power
- [ 3.870000] Registered led device: edimax:amber:wlan
- [ 3.870000] Registered led device: edimax:blue:3g
- [ 7.220000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
- [ 7.230000] jffs2_build_filesystem(): unlocking the mtd device... done.
- [ 7.240000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
- [ 9.910000] jffs2: notice: (371) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- [ 13.250000] Compat-drivers backport release: compat-drivers-2013-01-21-1
- [ 13.260000] Backport based on wireless-testing.git master-2013-02-22
- [ 13.270000] compat.git: wireless-testing.git
- [ 13.470000] cfg80211: Calling CRDA to update world regulatory domain
- [ 13.490000] cfg80211: World regulatory domain updated:
- [ 13.500000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 13.510000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 13.530000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 13.540000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 13.560000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 13.570000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 14.320000] usbcore: registered new interface driver usbfs
- [ 14.330000] usbcore: registered new interface driver hub
- [ 14.350000] usbcore: registered new device driver usb
- [ 14.500000] zsmalloc: module is from the staging directory, the quality is unknown, you have been warned.
- [ 14.540000] zram: module is from the staging directory, the quality is unknown, you have been warned.
- [ 14.560000] zram: num_devices not specified. Using default: 1
- [ 14.580000] zram: Creating 1 devices ...
- [ 15.310000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
- [ 17.950000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2872, rf: 0005, rev: 0200.
- [ 17.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 17.980000] Registered led device: rt2800pci-phy0::radio
- [ 17.980000] Registered led device: rt2800pci-phy0::assoc
- [ 17.980000] Registered led device: rt2800pci-phy0::quality
- [ 18.060000] PPP generic driver version 2.4.2
- [ 18.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 18.950000] NET: Registered protocol family 24
- [ 19.120000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 19.170000] nf_conntrack version 0.5.0 (467 buckets, 1868 max)
- [ 20.550000] xt_time: kernel timezone is -0000
- [ 21.090000] dwc_otg: version 2.72a 24-JUN-2008
- [ 21.100000] dwc_otg: Core Release: 2.66a
- [ 21.310000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled
- [ 21.330000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled
- [ 21.340000] dwc_otg: Using DMA mode
- [ 21.350000] dwc_otg: Device using Buffer DMA mode
- [ 21.360000] dwc_otg dwc_otg.0: DWC OTG Controller
- [ 21.370000] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
- [ 21.380000] dwc_otg dwc_otg.0: irq 26, io mem 0x101c0000
- [ 21.390000] dwc_otg: Init: Port Power? op_state=1
- [ 21.400000] dwc_otg: Init: Power Port (0)
- [ 21.410000] hub 1-0:1.0: USB hub found
- [ 21.420000] hub 1-0:1.0: 1 port detected
- [ 21.510000] usbcore: registered new interface driver cdc_acm
- [ 21.530000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 21.770000] usbcore: registered new interface driver usbserial
- [ 21.780000] usbcore: registered new interface driver usbserial_generic
- [ 21.800000] usbserial: USB Serial support registered for generic
- [ 21.940000] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 22.200000] usbcore: registered new interface driver option
- [ 22.220000] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 22.640000] u32 classifier
- [ 22.650000] Performance counters on
- [ 22.650000] input device check on
- [ 22.660000] Actions configured
- [ 22.900000] Mirror/redirect action on
- [ 28.540000] Adding 14332k swap on /dev/zram0. Priority:-1 extents:1 across:14332k SS
- [ 30.540000] hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
- [ 30.550000] usb 1-1: USB disconnect, device number 2
- [ 31.620000] usb 1-1: new high-speed USB device number 3 using dwc_otg
- [ 31.840000] option 1-1:1.0: GSM modem (1-port) converter detected
- [ 31.860000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
- [ 31.870000] option 1-1:1.1: GSM modem (1-port) converter detected
- [ 31.890000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
- [ 32.720000] device eth0 entered promiscuous mode
- [ 32.740000] br-lan: port 1(eth0) entered forwarding state
- [ 32.750000] br-lan: port 1(eth0) entered forwarding state
- [ 34.750000] br-lan: port 1(eth0) entered forwarding state
- [ 37.480000] cfg80211: Calling CRDA for country: US
- [ 37.490000] cfg80211: Regulatory domain changed to country: US
- [ 37.500000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 37.510000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 37.530000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 37.550000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 37.560000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 37.580000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 37.590000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 40.290000] device wlan0 entered promiscuous mode
- [ 40.870000] br-lan: port 2(wlan0) entered forwarding state
- [ 40.880000] br-lan: port 2(wlan0) entered forwarding state
- [ 42.880000] br-lan: port 2(wlan0) entered forwarding state
- [ 61.150000] ramips-wdt: timeout value 60 must be 0 < timeout <= 40, using 40
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement