API tools faq
paste
Advertisement
Guest User

dmesg from wndr4300 broken

a guest
Jan 1st, 2014
225
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.04 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# dmesg
  2. [ 0.000000] Linux version 3.10.24 (alexey@ubuntu64) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39171) ) #1 Wed Jan 1 22:36:48 NOVT 2014
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
  5. [ 0.000000] SoC: Atheros AR9344 rev 2
  6. [ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  15. [ 0.000000] On node 0 totalpages: 32768
  16. [ 0.000000] free_area_init_node: node 0, pgdat 803129b0, node_mem_map 81000000
  17. [ 0.000000] Normal zone: 256 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  20. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  21. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  25. [ 0.000000] Kernel command line: board=WNDR4300 console=ttyS0,115200 mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubiroot),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) ubi.mtd=ubiroot rootfstype=squashfs noinitrd
  26. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 126252k/131072k available (2261k kernel code, 4820k reserved, 587k data, 220k init, 0k highmem)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:51
  34. [ 0.060000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
  35. [ 0.070000] pid_max: default: 32768 minimum: 301
  36. [ 0.070000] Mount-cache hash table entries: 512
  37. [ 0.080000] NET: Registered protocol family 16
  38. [ 0.080000] MIPS: machine is NETGEAR WNDR4300
  39. [ 0.090000] ar71xx: using random MAC address for eth0
  40. [ 0.300000] bio: create slab <bio-0> at 0
  41. [ 0.300000] Switching to clocksource MIPS
  42. [ 0.310000] NET: Registered protocol family 2
  43. [ 0.310000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  44. [ 0.320000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.330000] TCP: Hash tables configured (established 1024 bind 1024)
  46. [ 0.330000] TCP: reno registered
  47. [ 0.330000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  48. [ 0.340000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  49. [ 0.350000] NET: Registered protocol family 1
  50. [ 0.350000] PCI: CLS 0 bytes, default 32
  51. [ 0.370000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  52. [ 0.370000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  53. [ 0.380000] msgmni has been set to 246
  54. [ 0.390000] io scheduler noop registered
  55. [ 0.390000] io scheduler deadline registered (default)
  56. [ 0.400000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  57. [ 0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  58. [ 0.430000] console [ttyS0] enabled, bootconsole disabled
  59. [ 0.440000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
  60. [ 0.450000] Scanning device for bad blocks
  61. [ 0.540000] 12 cmdlinepart partitions found on MTD device ar934x-nfc
  62. [ 0.550000] Creating 12 MTD partitions on "ar934x-nfc":
  63. [ 0.560000] 0x000000000000-0x000000040000 : "u-boot"
  64. [ 0.560000] 0x000000040000-0x000000080000 : "u-boot-env"
  65. [ 0.570000] 0x000000080000-0x0000000c0000 : "caldata"
  66. [ 0.580000] 0x0000000c0000-0x000000140000 : "pot"
  67. [ 0.580000] 0x000000140000-0x000000340000 : "language"
  68. [ 0.590000] 0x000000340000-0x0000003c0000 : "config"
  69. [ 0.600000] 0x0000003c0000-0x0000006c0000 : "traffic_meter"
  70. [ 0.600000] 0x0000006c0000-0x0000008c0000 : "kernel"
  71. [ 0.610000] 0x0000008c0000-0x000001fc0000 : "ubiroot"
  72. [ 0.620000] 0x0000006c0000-0x000001fc0000 : "firmware"
  73. [ 0.960000] 0x000001fc0000-0x000002000000 : "caldata_backup"
  74. [ 0.960000] 0x000002000000-0x000008000000 : "reserved"
  75. [ 1.000000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
  76. [ 2.220000] libphy: ag71xx_mdio: probed
  77. [ 2.780000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
  78. [ 2.790000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
  79. [ 2.800000] TCP: cubic registered
  80. [ 2.800000] NET: Registered protocol family 17
  81. [ 2.810000] 8021q: 802.1Q VLAN Support v1.8
  82. [ 2.810000] UBI: attaching mtd8 to ubi0
  83. [ 2.860000] UBI: EOF marker found, PEBs from 35 will be erased
  84. [ 2.860000] UBI: scanning is finished
  85. [ 2.900000] gluebi (pid 1): gluebi_resized: got update notification for unknown UBI device 0 volume 1
  86. [ 2.910000] UBI: volume 1 ("rootfs_data") re-sized from 1 to 128 LEBs
  87. [ 2.910000] UBI: attached mtd8 (name "ubiroot", size 23 MiB) to ubi0
  88. [ 2.920000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  89. [ 2.930000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  90. [ 2.930000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  91. [ 2.940000] UBI: good PEBs: 184, bad PEBs: 0, corrupted PEBs: 0
  92. [ 2.950000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
  93. [ 2.950000] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 441891206
  94. [ 2.960000] UBI: available PEBs: 0, total reserved PEBs: 184, PEBs reserved for bad PEB handling: 20
  95. [ 2.970000] UBI: background thread "ubi_bgt0d" started, PID 264
  96. [ 2.980000] mtd: device 12 (rootfs) set to be root filesystem
  97. [ 3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
  98. [ 3.010000] Freeing unused kernel memory: 220K (80329000 - 80360000)
  99. [ 5.940000] usbcore: registered new interface driver usbfs
  100. [ 5.950000] usbcore: registered new interface driver hub
  101. [ 5.960000] usbcore: registered new device driver usb
  102. [ 6.000000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  103. [ 6.000000] ehci-platform: EHCI generic platform driver
  104. [ 6.010000] ehci-platform ehci-platform: EHCI Host Controller
  105. [ 6.020000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  106. [ 6.030000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  107. [ 6.050000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  108. [ 6.050000] hub 1-0:1.0: USB hub found
  109. [ 6.060000] hub 1-0:1.0: 1 port detected
  110. [ 6.070000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  111. [ 6.780000] eth0: link up (1000Mbps/Full duplex)
  112. [ 7.660000] eth0: link down
  113. [ 9.020000] NET: Registered protocol family 10
  114. [ 9.040000] RPC: Registered named UNIX socket transport module.
  115. [ 9.040000] RPC: Registered udp transport module.
  116. [ 9.050000] RPC: Registered tcp transport module.
  117. [ 9.050000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  118. [ 9.080000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  119. [ 9.100000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
  120. [ 9.110000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  121. [ 9.130000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
  122. [ 9.140000] Backport generated by backports.git backports-20130802-0-gdb67a3f
  123. [ 9.150000] ip_tables: (C) 2000-2006 Netfilter Core Team
  124. [ 9.160000] lib80211: common routines for IEEE802.11 drivers
  125. [ 9.170000] lib80211_crypt: registered algorithm 'NULL'
  126. [ 9.170000] lib80211_crypt: registered algorithm 'CCMP'
  127. [ 9.170000] lib80211_crypt: registered algorithm 'TKIP'
  128. [ 9.170000] lib80211_crypt: registered algorithm 'WEP'
  129. [ 9.200000] xt_time: kernel timezone is -0000
  130. [ 9.230000] cfg80211: Calling CRDA to update world regulatory domain
  131. [ 9.230000] cfg80211: World regulatory domain updated:
  132. [ 9.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  133. [ 9.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  134. [ 9.250000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  135. [ 9.260000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  136. [ 9.270000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  137. [ 9.280000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  138. [ 9.290000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  139. [ 9.360000] PPP generic driver version 2.4.2
  140. [ 9.370000] NET: Registered protocol family 24
  141. [ 9.420000] usbcore: registered new interface driver ath9k_htc
  142. [ 9.570000] ath: EEPROM regdomain: 0x0
  143. [ 9.570000] ath: EEPROM indicates default country code should be used
  144. [ 9.570000] ath: doing EEPROM country->regdmn map search
  145. [ 9.570000] ath: country maps to regdmn code: 0x3a
  146. [ 9.570000] ath: Country alpha2 being used: US
  147. [ 9.570000] ath: Regpair used: 0x3a
  148. [ 9.580000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  149. [ 9.590000] cfg80211: Calling CRDA for country: US
  150. [ 9.590000] cfg80211: Regulatory domain changed to country: US
  151. [ 9.600000] cfg80211: DFS Master region FCC
  152. [ 9.600000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  153. [ 9.610000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  154. [ 9.620000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
  155. [ 9.630000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
  156. [ 9.640000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
  157. [ 9.640000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
  158. [ 9.650000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
  159. [ 9.660000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
  160. [ 9.670000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
  161. [ 16.530000] svc: failed to register nfsdv2 RPC service (errno 5).
  162. [ 17.590000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  163. [ 17.590000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  164. [ 17.610000] device eth0.1 entered promiscuous mode
  165. [ 17.610000] device eth0 entered promiscuous mode
  166. [ 17.630000] jffs2: write-buffering enabled buffer (2048) erasesize (126976)
  167. [ 17.650000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  168. [ 17.680000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  169. [ 17.680000] jffs2_build_filesystem(): unlocking the mtd device... done.
  170. [ 17.710000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
  171. [ 17.690000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
  172. [ 18.190000] jffs2: notice: (946) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  173. [ 19.800000] eth0: link up (1000Mbps/Full duplex)
  174. [ 19.830000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  175. [ 19.830000] br-lan: port 1(eth0.1) entered forwarding state
  176. [ 19.840000] br-lan: port 1(eth0.1) entered forwarding state
  177. [ 19.840000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  178. [ 19.850000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
  179. [ 19.900000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  180. [ 21.840000] br-lan: port 1(eth0.1) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!