Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Adapter #0
- ==============================================================================
- Versions
- ================
- Product Name : LSI MegaRAID SAS 9260-8i
- Serial No : SV04607311
- FW Package Build: 12.12.0-0048
- Mfg. Data
- ================
- Mfg. Date : 11/08/10
- Rework Date : 00/00/00
- Revision No :
- Battery FRU : N/A
- Image Versions in Flash:
- ================
- FW Version : 2.120.63-1242
- BIOS Version : 3.22.00_4.11.05.00_0x05020000
- Preboot CLI Version: 04.04-017:#%00008
- WebBIOS Version : 6.0-34-e_29-Rel
- NVDATA Version : 2.09.03-0013
- Boot Block Version : 2.02.00.00-0000
- BOOT Version : 09.250.01.219
- Pending Images in Flash
- ================
- None
- PCI Info
- ================
- Controller Id : 0000
- Vendor Id : 1000
- Device Id : 0079
- SubVendorId : 1014
- SubDeviceId : 03c7
- Host Interface : PCIE
- ChipRevision : B2
- Number of Frontend Port: 0
- Device Interface : PCIE
- Number of Backend Port: 8
- Port : Address
- 0 4433221100000000
- 1 4433221101000000
- 2 4433221105000000
- 3 4433221106000000
- 4 4433221107000000
- 5 4433221103000000
- 6 4433221102000000
- 7 0000000000000000
- HW Configuration
- ================
- SAS Address : 500605b002deaf30
- BBU : Present
- Alarm : Present
- NVRAM : Present
- Serial Debugger : Present
- Memory : Present
- Flash : Present
- Memory Size : 256MB
- TPM : Absent
- On board Expander: Absent
- Upgrade Key : Absent
- Temperature sensor for ROC : Absent
- Temperature sensor for controller : Absent
- Settings
- ================
- Current Time : 8:51:8 4/27, 2015
- Predictive Fail Poll Interval : 300sec
- Interrupt Throttle Active Count : 16
- Interrupt Throttle Completion : 50us
- Rebuild Rate : 30%
- PR Rate : 30%
- BGI Rate : 30%
- Check Consistency Rate : 30%
- Reconstruction Rate : 100%
- Cache Flush Interval : 4s
- Max Drives to Spinup at One Time : 4
- Delay Among Spinup Groups : 2s
- Physical Drive Coercion Mode : Disabled
- Cluster Mode : Disabled
- Alarm : Enabled
- Auto Rebuild : Enabled
- Battery Warning : Enabled
- Ecc Bucket Size : 15
- Ecc Bucket Leak Rate : 1440 Minutes
- Restore HotSpare on Insertion : Disabled
- Expose Enclosure Devices : Enabled
- Maintain PD Fail History : Enabled
- Host Request Reordering : Enabled
- Auto Detect BackPlane Enabled : SGPIO/i2c SEP
- Load Balance Mode : Auto
- Use FDE Only : No
- Security Key Assigned : No
- Security Key Failed : No
- Security Key Not Backedup : No
- Default LD PowerSave Policy : Controller Defined
- Maximum number of direct attached drives to spin up in 1 min : 120
- Auto Enhanced Import : No
- Any Offline VD Cache Preserved : No
- Allow Boot with Preserved Cache : No
- Disable Online Controller Reset : No
- PFK in NVRAM : No
- Use disk activity for locate : No
- POST delay : 90 seconds
- Capabilities
- ================
- RAID Level Supported : RAID0, RAID1, RAID5, RAID00, RAID10, RAID50, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
- Supported Drives : SAS, SATA
- Boot Volume Supported : NO
- Allowed Mixing:
- Mix in Enclosure Allowed
- Mix of SAS/SATA of HDD type in VD Allowed
- Status
- ================
- ECC Bucket Count : 0
- Limitations
- ================
- Max Arms Per VD : 32
- Max Spans Per VD : 8
- Max Arrays : 128
- Max Number of VDs : 64
- Max Parallel Commands : 1008
- Max SGE Count : 80
- Max Data Transfer Size : 8192 sectors
- Max Strips PerIO : 42
- Max LD per array : 16
- Min Strip Size : 8 KB
- Max Strip Size : 1.0 MB
- Max Configurable CacheCade Size: 0 GB
- Current Size of CacheCade : 0 GB
- Current Size of FW Cache : 145 MB
- Device Present
- ================
- Virtual Drives : 1
- Degraded : 0
- Offline : 0
- Physical Devices : 8
- Disks : 7
- Critical Disks : 0
- Failed Disks : 0
- Supported Adapter Operations
- ================
- Rebuild Rate : Yes
- CC Rate : Yes
- BGI Rate : Yes
- Reconstruct Rate : Yes
- Patrol Read Rate : Yes
- Alarm Control : Yes
- Cluster Support : No
- BBU : Yes
- Spanning : Yes
- Dedicated Hot Spare : Yes
- Revertible Hot Spares : Yes
- Foreign Config Import : Yes
- Self Diagnostic : Yes
- Allow Mixed Redundancy on Array : No
- Global Hot Spares : Yes
- Deny SCSI Passthrough : No
- Deny SMP Passthrough : No
- Deny STP Passthrough : No
- Support Security : No
- Snapshot Enabled : No
- Support the OCE without adding drives : Yes
- Support PFK : No
- Support PI : No
- Support Boot Time PFK Change : No
- Disable Online PFK Change : No
- Support Shield State : No
- Block SSD Write Disk Cache Change: No
- Point In Time Progress: No
- Supported VD Operations
- ================
- Read Policy : Yes
- Write Policy : Yes
- IO Policy : Yes
- Access Policy : Yes
- Disk Cache Policy : Yes
- Reconstruction : Yes
- Deny Locate : No
- Deny CC : No
- Allow Ctrl Encryption: No
- Enable LDBBM : No
- Support Breakmirror : No
- Power Savings : Yes
- Supported PD Operations
- ================
- Force Online : Yes
- Force Offline : Yes
- Force Rebuild : Yes
- Deny Force Failed : No
- Deny Force Good/Bad : No
- Deny Missing Replace : No
- Deny Clear : No
- Deny Locate : No
- Support Temperature : Yes
- NCQ : No
- Disable Copyback : No
- Enable JBOD : No
- Enable Copyback on SMART : No
- Enable Copyback to SSD on SMART Error : Yes
- Enable SSD Patrol Read : No
- PR Correct Unconfigured Areas : Yes
- Enable Spin Down of UnConfigured Drives : No
- Disable Spin Down of hot spares : Yes
- Spin Down time : 30
- T10 Power State : Yes
- Error Counters
- ================
- Memory Correctable Errors : 0
- Memory Uncorrectable Errors : 0
- High Availability Properties
- ================
- Topology Type : None
- Cluster Information
- ================
- Cluster Permitted : No
- Cluster Active : No
- Default Settings
- ================
- Phy Polarity : 0
- Phy PolaritySplit : 0
- Background Rate : 30
- Strip Size : 64kB
- Flush Time : 4 seconds
- Write Policy : WB
- Read Policy : Adaptive
- Cache When BBU Bad : Disabled
- Cached IO : No
- SMART Mode : Mode 6
- Alarm Disable : Yes
- Coercion Mode : None
- ZCR Config : Unknown
- Dirty LED Shows Drive Activity : No
- BIOS Continue on Error : No
- Spin Down Mode : None
- Allowed Device Type : SAS/SATA Mix
- Allow Mix in Enclosure : Yes
- Allow HDD SAS/SATA Mix in VD : Yes
- Allow SSD SAS/SATA Mix in VD : No
- Allow HDD/SSD Mix in VD : No
- Allow SATA in Cluster : No
- Max Chained Enclosures : 16
- Disable Ctrl-R : Yes
- Enable Web BIOS : Yes
- Direct PD Mapping : No
- BIOS Enumerate VDs : Yes
- Restore Hot Spare on Insertion : No
- Expose Enclosure Devices : Yes
- Maintain PD Fail History : Yes
- Disable Puncturing : No
- Zero Based Enclosure Enumeration : No
- PreBoot CLI Enabled : Yes
- LED Show Drive Activity : Yes
- Cluster Disable : Yes
- SAS Disable : No
- Auto Detect BackPlane Enable : SGPIO/i2c SEP
- Use FDE Only : No
- Enable Led Header : Yes
- Delay during POST : 0
- EnableCrashDump : No
- Disable Online Controller Reset : No
- EnableLDBBM : No
- Un-Certified Hard Disk Drives : Allow
- Treat Single span R1E as R10 : No
- Max LD per array : 16
- Power Saving option : Don't Auto spin down Configured Drives
- Max power savings option is not allowed for LDs. Only T10 power conditions are to be used.
- Default spin down time in minutes: 30
- Enable JBOD : No
- TTY Log In Flash : No
- Auto Enhanced Import : No
- BreakMirror RAID Support : No
- Disable Join Mirror : No
- Enable Shield State : No
- Time taken to detect CME : 60s
- Exit Code: 0x00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement