Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2015.10-armbian (Nov 05 2015 - 09:50:21)
- DRAM: 1024 MiB
- CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
- U-Boot 2015.10-armbian (Nov 05 2015 - 09:50:21 +0200) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- I2C: ready
- DRAM: 1 GiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- Setting up a 720x576i composite-pal console (overscan 32x20)
- Error: no valid bmp image at 66000000
- In: serial
- Out: vga
- Err: vga
- SCSI: SUNXI SCSI INIT
- SATA link 0 timeout.
- AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- flags: ncq stag pm led clo only pmp pio slum part ccc apst
- Net: eth0: ethernet@01c50000
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB OHCI 1.0
- USB2: USB EHCI 1.00
- USB3: USB OHCI 1.0
- scanning bus 0 for devices... 2 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- Hit any key to stop autoboot: 0
- 6944 bytes read in 262 ms (25.4 KiB/s)
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 1973 bytes read in 322 ms (5.9 KiB/s)
- ## Executing script at 43100000
- 0 bytes read in 241 ms (0 Bytes/s)
- 27145 bytes read in 353 ms (74.2 KiB/s)
- 5583496 bytes read in 716 ms (7.4 MiB/s)
- Kernel image @ 0x46000000 [ 0x000000 - 0x553288 ]
- ## Flattened Device Tree blob at 49000000
- Booting using the fdt blob at 0x49000000
- Using Device Tree in place at 49000000, end 49009a08
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Debian GNU/Linux 7 bananapi ttyS0
- bananapi login: user1
- Password:
- Last login: Sat Nov 28 18:55:08 EET 2015 on ttyS0
- ____
- | __ ) __ _ _ __ __ _ _ __ __ _
- | _ \ / _` | '_ \ / _` | '_ \ / _` |
- | |_) | (_| | | | | (_| | | | | (_| |
- |____/ \__,_|_| |_|\__,_|_| |_|\__,_|
- Load: 0.49, 0.13, 0.04 - Board: 41.9°C - Memory: 964Mb
- user1@bananapi:~$ dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.2.5-sunxi (root@ubuntu) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP Thu Nov 5 10:57:15 EET 2015
- [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Banana Pi BPI-M1
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 261738
- [ 0.000000] free_area_init_node: node 0, pgdat c0a623c0, node_mem_map eeef8000
- [ 0.000000] Normal zone: 1710 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 67178 pages, LIFO batch:15
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] PERCPU: Embedded 11 pages/cpu @eeec7000 s15424 r8192 d21440 u45056
- [ 0.000000] pcpu-alloc: s15424 r8192 d21440 u45056 alloc=11*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260028
- [ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1025760K/1046952K available (7899K kernel code, 348K rwdata, 2028K rodata, 328K init, 311K bss, 21192K reserved, 0K cma-reserved, 268712K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc09b9ef4 (9928 kB)
- [ 0.000000] .init : 0xc09ba000 - 0xc0a0c000 ( 328 kB)
- [ 0.000000] .data : 0xc0a0c000 - 0xc0a63360 ( 349 kB)
- [ 0.000000] .bss : 0xc0a66000 - 0xc0ab3edc ( 312 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000018] Switching to timer-based delay loop, resolution 41ns
- [ 0.000379] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000548] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
- [ 0.000731] Console: colour dummy device 80x30
- [ 0.000872] console [tty1] enabled
- [ 0.000898] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.000912] pid_max: default: 32768 minimum: 301
- [ 0.001056] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001067] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001802] Initializing cgroup subsys blkio
- [ 0.001829] Initializing cgroup subsys memory
- [ 0.001869] Initializing cgroup subsys devices
- [ 0.001883] Initializing cgroup subsys freezer
- [ 0.001896] Initializing cgroup subsys net_cls
- [ 0.001908] Initializing cgroup subsys perf_event
- [ 0.001956] CPU: Testing write buffer coherency: ok
- [ 0.002310] /cpus/cpu@0 missing clock-frequency property
- [ 0.002328] /cpus/cpu@1 missing clock-frequency property
- [ 0.002340] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002405] Setting up static identity map for 0x400082c0 - 0x40008318
- [ 0.004403] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.004499] Brought up 2 CPUs
- [ 0.004522] SMP: Total of 2 processors activated (96.00 BogoMIPS).
- [ 0.004528] CPU: All CPU(s) started in HYP mode.
- [ 0.004533] CPU: Virtualization extensions available.
- [ 0.005290] devtmpfs: initialized
- [ 0.013523] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- [ 0.013921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.014221] xor: measuring software checksum speed
- [ 0.109965] arm4regs : 1262.000 MB/sec
- [ 0.210032] 8regs : 778.800 MB/sec
- [ 0.310101] 32regs : 799.200 MB/sec
- [ 0.310109] xor: using function: arm4regs (1262.000 MB/sec)
- [ 0.310255] pinctrl core: initialized pinctrl subsystem
- [ 0.311433] NET: Registered protocol family 16
- [ 0.312058] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.334621] cpuidle: using governor ladder
- [ 0.360177] cpuidle: using governor menu
- [ 0.366813] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.366829] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.540626] raid6: int32x1 gen() 138 MB/s
- [ 0.710599] raid6: int32x1 xor() 110 MB/s
- [ 0.880811] raid6: int32x2 gen() 185 MB/s
- [ 1.051090] raid6: int32x2 xor() 120 MB/s
- [ 1.221171] raid6: int32x4 gen() 197 MB/s
- [ 1.391336] raid6: int32x4 xor() 122 MB/s
- [ 1.561458] raid6: int32x8 gen() 179 MB/s
- [ 1.731600] raid6: int32x8 xor() 116 MB/s
- [ 1.731608] raid6: using algorithm int32x4 gen() 197 MB/s
- [ 1.731614] raid6: .... xor() 122 MB/s, rmw enabled
- [ 1.731621] raid6: using intx1 recovery algorithm
- [ 1.731947] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
- [ 1.731993] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
- [ 1.732739] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
- [ 1.733265] SCSI subsystem initialized
- [ 1.733578] libata version 3.00 loaded.
- [ 1.733901] usbcore: registered new interface driver usbfs
- [ 1.733970] usbcore: registered new interface driver hub
- [ 1.734071] usbcore: registered new device driver usb
- [ 1.734221] media: Linux media interface: v0.10
- [ 1.734281] Linux video capture interface: v2.00
- [ 1.734387] pps_core: LinuxPPS API ver. 1 registered
- [ 1.734395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.734423] PTP clock support registered
- [ 1.736698] clocksource: Switched to clocksource arch_sys_counter
- [ 1.737688] simple-framebuffer 7fe79000.framebuffer: framebuffer at 0x7fe79000, 0x178e00 bytes, mapped to 0xf0200000
- [ 1.737708] simple-framebuffer 7fe79000.framebuffer: format=x8r8g8b8, mode=656x536x32, linelength=2880
- [ 1.744415] Console: switching to colour frame buffer device 82x33
- [ 1.750538] simple-framebuffer 7fe79000.framebuffer: fb0: simplefb registered!
- [ 1.761403] NET: Registered protocol family 2
- [ 1.762131] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 1.762226] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 1.762352] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.762441] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.762504] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 1.762802] NET: Registered protocol family 1
- [ 1.763248] RPC: Registered named UNIX socket transport module.
- [ 1.763263] RPC: Registered udp transport module.
- [ 1.763269] RPC: Registered tcp transport module.
- [ 1.763275] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.764170] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
- [ 1.764237] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 1.765479] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 1.774156] zpool: loaded
- [ 1.777174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.779091] NFS: Registering the id_resolver key type
- [ 1.779175] Key type id_resolver registered
- [ 1.779183] Key type id_legacy registered
- [ 1.779887] Key type cifs.idmap registered
- [ 1.780184] fuse init (API version 7.23)
- [ 1.781282] JFS: nTxBlock = 8013, nTxLock = 64110
- [ 1.791646] SGI XFS with ACLs, security attributes, realtime, no debug enabled
- [ 1.798878] bounce: pool size: 64 pages
- [ 1.799001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 1.799194] io scheduler noop registered
- [ 1.799210] io scheduler deadline registered
- [ 1.799265] io scheduler cfq registered (default)
- [ 1.801940] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 1.863540] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 1.887072] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
- [ 1.910459] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 42, base_baud = 1500000) is a U6_16550A
- [ 1.933782] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 43, base_baud = 1500000) is a U6_16550A
- [ 1.940839] loop: module loaded
- [ 1.941139] Loading iSCSI transport class v2.0-870.
- [ 2.006773] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
- [ 2.006830] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
- [ 2.006863] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 2.006880] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
- [ 2.007949] scsi host0: ahci-sunxi
- [ 2.008315] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30
- [ 2.009653] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 2.012492] tun: Universal TUN/TAP device driver, 1.6
- [ 2.012510] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.013167] PPP generic driver version 2.4.2
- [ 2.013426] PPP BSD Compression module registered
- [ 2.013440] PPP Deflate Compression module registered
- [ 2.013469] PPP MPPE Compression module registered
- [ 2.013487] NET: Registered protocol family 24
- [ 2.013531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.013545] ehci-platform: EHCI generic platform driver
- [ 2.013967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.014006] ohci-platform: OHCI generic platform driver
- [ 2.014388] usbcore: registered new interface driver usb-storage
- [ 2.014405] ftdi_elan: driver ftdi-elan
- [ 2.014878] usbcore: registered new interface driver ftdi-elan
- [ 2.015921] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
- [ 2.015938] sunxi-rtc 1c20d00.rtc: RTC enabled
- [ 2.016066] i2c /dev entries driver
- [ 2.017209] axp20x 0-0034: AXP20x variant AXP209 found
- [ 2.024606] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
- [ 2.024812] axp20x-regulator axp20x-regulator: regulators node not found
- [ 2.027267] axp20x 0-0034: AXP20X driver loaded
- [ 2.029095] IR NEC protocol handler initialized
- [ 2.029113] IR RC5(x/sz) protocol handler initialized
- [ 2.029123] IR RC6 protocol handler initialized
- [ 2.029133] IR JVC protocol handler initialized
- [ 2.029143] IR Sony protocol handler initialized
- [ 2.029152] IR SANYO protocol handler initialized
- [ 2.029162] IR Sharp protocol handler initialized
- [ 2.029172] IR MCE Keyboard/mouse protocol handler initialized
- [ 2.029182] IR XMP protocol handler initialized
- [ 2.029302] usbcore: registered new interface driver uvcvideo
- [ 2.029309] USB Video Class driver (1.1.1)
- [ 2.030460] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 2.031223] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
- [ 2.031712] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 2.066928] sunxi-mmc 1c0f000.mmc: base:0xf0178000 irq:27
- [ 2.067727] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.068041] usbcore: registered new interface driver usbhid
- [ 2.068051] usbhid: USB HID core driver
- [ 2.069033] ipip: IPv4 over IPv4 tunneling driver
- [ 2.069876] Initializing XFRM netlink socket
- [ 2.070855] NET: Registered protocol family 10
- [ 2.072098] NET: Registered protocol family 17
- [ 2.072157] NET: Registered protocol family 15
- [ 2.072222] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 2.072235] can: controller area network core (rev 20120528 abi 9)
- [ 2.072307] NET: Registered protocol family 29
- [ 2.072385] 8021q: 802.1Q VLAN Support v1.8
- [ 2.072453] Key type dns_resolver registered
- [ 2.083087] cpu cpu0: running cpufreq without cooling device: -38
- [ 2.083158] Registering SWP/SWPB emulation handler
- [ 2.084119] registered taskstats version 1
- [ 2.084163] zswap: loading zswap
- [ 2.084663] zpool: no driver for type zbud
- [ 2.084676] zswap: zbud zpool not available
- [ 2.084681] zswap: zpool creation failed
- [ 2.087947] Btrfs loaded
- [ 2.089478] Key type encrypted registered
- [ 2.091855] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14)
- [ 2.096386] gmac-3v3: disabling
- [ 2.096411] usb2-vbus: disabling
- [ 2.096419] usb1-vbus: disabling
- [ 2.096432] vcc5v0: disabling
- [ 2.096439] vcc3v0: disabling
- [ 2.113963] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 2.116403] mmc0: new high speed SDHC card at address 1234
- [ 2.117070] mmcblk0: mmc0:1234 SA08G 7.21 GiB
- [ 2.118606] mmcblk0: p1
- [ 2.356808] ata1: SATA link down (SStatus 0 SControl 300)
- [ 2.379648] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- [ 2.379792] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
- [ 2.390782] devtmpfs: mounted
- [ 2.391954] Freeing unused kernel memory: 328K (c09ba000 - c0a0c000)
- [ 3.545245] udevd[214]: starting version 175
- [ 3.974705] ehci-platform 1c14000.usb: EHCI Host Controller
- [ 3.974771] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
- [ 3.974975] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
- [ 3.986951] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
- [ 3.987453] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.987479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.987495] usb usb1: Product: EHCI Host Controller
- [ 3.987521] usb usb1: Manufacturer: Linux 4.2.5-sunxi ehci_hcd
- [ 3.987534] usb usb1: SerialNumber: 1c14000.usb
- [ 3.988828] hub 1-0:1.0: USB hub found
- [ 3.988957] hub 1-0:1.0: 1 port detected
- [ 3.990199] ehci-platform 1c1c000.usb: EHCI Host Controller
- [ 3.990269] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
- [ 3.990476] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
- [ 4.006873] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- [ 4.007306] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.007324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.007338] usb usb2: Product: EHCI Host Controller
- [ 4.007350] usb usb2: Manufacturer: Linux 4.2.5-sunxi ehci_hcd
- [ 4.007361] usb usb2: SerialNumber: 1c1c000.usb
- [ 4.008722] hub 2-0:1.0: USB hub found
- [ 4.008838] hub 2-0:1.0: 1 port detected
- [ 4.009947] ohci-platform 1c14400.usb: Generic Platform OHCI controller
- [ 4.010016] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
- [ 4.010274] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
- [ 4.071748] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.071770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.071781] usb usb3: Product: Generic Platform OHCI controller
- [ 4.071790] usb usb3: Manufacturer: Linux 4.2.5-sunxi ohci_hcd
- [ 4.071798] usb usb3: SerialNumber: 1c14400.usb
- [ 4.072951] hub 3-0:1.0: USB hub found
- [ 4.073052] hub 3-0:1.0: 1 port detected
- [ 4.073993] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 4.074046] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
- [ 4.074229] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
- [ 4.132903] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.132925] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.132935] usb usb4: Product: Generic Platform OHCI controller
- [ 4.132944] usb usb4: Manufacturer: Linux 4.2.5-sunxi ohci_hcd
- [ 4.132953] usb usb4: SerialNumber: 1c1c400.usb
- [ 4.133954] hub 4-0:1.0: USB hub found
- [ 4.134053] hub 4-0:1.0: 1 port detected
- [ 4.226989] sun7i-dwmac 1c50000.ethernet: no reset control found
- [ 4.227013] Ring mode enabled
- [ 4.227022] No HW DMA feature register supported
- [ 4.227029] Normal descriptors
- [ 4.227035] TX Checksum insertion supported
- [ 4.306830] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 4.326750] libphy: stmmac: probed
- [ 4.326784] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
- [ 4.326793] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
- [ 4.458693] usb 1-1: New USB device found, idVendor=1c88, idProduct=0007
- [ 4.458720] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.458731] usb 1-1: Product: SM-USB 007
- [ 4.458739] usb 1-1: Manufacturer: Somagic, Inc.
- [ 4.458748] usb 1-1: SerialNumber: SMBL007
- [ 5.195096] cfg80211: World regulatory domain updated:
- [ 5.195124] cfg80211: DFS Master region: unset
- [ 5.195132] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 5.195143] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.195152] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.195160] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.195171] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- [ 5.195181] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- [ 5.195190] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- [ 5.195198] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 5.195207] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 6.545166] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=writeback,commit=600,errors=remount-ro
- [ 8.861012] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:155644k SSFS
- [ 11.126334] random: dd urandom read with 25 bits of entropy available
- [ 12.337251] RX IPC Checksum Offload disabled
- [ 12.337284] No MAC Management Counters available
- [ 17.317153] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
- [ 24.650478] Bluetooth: Core ver 2.20
- [ 24.650597] NET: Registered protocol family 31
- [ 24.650607] Bluetooth: HCI device and connection manager initialized
- [ 24.650633] Bluetooth: HCI socket layer initialized
- [ 24.650649] Bluetooth: L2CAP socket layer initialized
- [ 24.650690] Bluetooth: SCO socket layer initialized
- [ 24.694856] Bluetooth: RFCOMM TTY layer initialized
- [ 24.694912] Bluetooth: RFCOMM socket layer initialized
- [ 24.694954] Bluetooth: RFCOMM ver 1.11
- [ 24.717750] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 24.717776] Bluetooth: BNEP filters: protocol multicast
- [ 24.717806] Bluetooth: BNEP socket layer initialized
- [ 26.756141] random: nonblocking pool is initialized
- user1@bananapi:~$
- user1@bananapi:~$ modprobe saa7115 debug=1
- user1@bananapi:~$ sudo modprobe smi2021 forceasgm=1
- ERROR: could not insert 'smi2021': Unknown symbol in module, or unknown parameter (see dmesg)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement