Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 2.6.35.7-perf (penguinrepair@enlighten) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Thu Apr 19 23:26:31 EDT 2012
- <4>[ 0.000000] CPU: ARMv7 Processor [511f00f2] revision 2 (ARMv7), cr=10c53c7d
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- <4>[ 0.000000] Machine: SPH-M930
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 114688
- <7>[ 0.000000] Normal zone: 2552 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 112136 pages, LIFO batch:31
- <6>[ 0.000000] allocating 10772480 bytes at c1097000 (1497000 physical) for fb
- <6>[ 0.000000] allocating 2097152 bytes at c1add000 (1edd000 physical) for audio pmem arena
- <6>[ 0.000000] allocating 6291456 bytes at c1d00000 (2100000 physical) for kernel ebi1 pmem arena
- <6>[ 0.000000] allocating 22020096 bytes at c2300000 (2700000 physical) for sf pmem arena
- <6>[ 0.000000] allocating 25165824 bytes at c7600000 (7a00000 physical) for adsp pmem arena
- <6>[ 0.000000] [set_crit_kmsg_addr] c8e00000
- <6>[ 0.000000] allocating 8192 bytes at c8e00000 (9200000 phys) for critical kmsg
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 112136
- <5>[ 0.000000] Kernel command line: console=NULL androidboot.hardware=SPH-M930BST androidboot.mode=normal androidboot.bootloader=0.07.2011 androidboot.carrier=Boost androidboot.emmc=true androidboot.baseband=msm
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 58MB 134MB 256MB = 448MB total
- <5>[ 0.000000] Memory: 378344k/378344k available, 80408k reserved, 0K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xe0800000 - 0xfa000000 ( 408 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc0039000 ( 196 kB)
- <5>[ 0.000000] .text : 0xc0039000 - 0xc074b000 (7240 kB)
- <5>[ 0.000000] .data : 0xc07bc000 - 0xc085da60 ( 647 kB)
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
- <6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
- <6>[ 0.000000] NR_IRQS:566
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <4>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000183] Calibrating delay loop... 681.57 BogoMIPS (lpj=3407872)
- <6>[ 0.250274] pid_max: default: 32768 minimum: 301
- <4>[ 0.250457] Mount-cache hash table entries: 512
- <6>[ 0.250732] Initializing cgroup subsys cpuacct
- <6>[ 0.250762] Initializing cgroup subsys freezer
- <6>[ 0.250762] CPU: Testing write buffer coherency: ok
- <6>[ 0.252716] NET: Registered protocol family 16
- <6>[ 0.253631] socinfo_init: v4, id=75, ver=2.1, raw_id=1410, raw_ver=1410, hw_plat=11, hw_plat_ver=0
- <4>[ 0.253662] [Vital2] msm7x30_init(), h/w revision : 10.
- <6>[ 0.253662] Clock ownership
- <6>[ 0.253662] GLBL : 07d82110
- <6>[ 0.253662] APPS : 00000000 00000000 00000000
- <6>[ 0.253692] ROW : 00000000 00000000
- <6>[ 0.253845] acpu_clock_init()
- <6>[ 0.254486] ACPU running at 1024000 KHz
- <4>[ 0.256652] ------------[ cut here ]------------
- <4>[ 0.256683] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x54/0x118()
- <4>[ 0.256683] autorequest GPIO-150
- <4>[ 0.256683] Modules linked in:
- <1>[ 0.256713] [<c004070c>] (unwind_backtrace+0x0/0x164) from [<c059d6a4>] (dump_stack+0x18/0x1c)
- <1>[ 0.256744] [<c059d6a4>] (dump_stack+0x18/0x1c) from [<c00de47c>] (warn_slowpath_common+0x54/0x6c)
- <1>[ 0.256774] [<c00de47c>] (warn_slowpath_common+0x54/0x6c) from [<c00de538>] (warn_slowpath_fmt+0x38/0x40)
- <1>[ 0.256805] [<c00de538>] (warn_slowpath_fmt+0x38/0x40) from [<c0285460>] (gpio_ensure_requested+0x54/0x118)
- <1>[ 0.256835] [<c0285460>] (gpio_ensure_requested+0x54/0x118) from [<c02856e8>] (gpio_direction_output+0x90/0x190)
- <1>[ 0.256835] [<c02856e8>] (gpio_direction_output+0x90/0x190) from [<c0013490>] (msm7x30_init+0x218/0xb50)
- <1>[ 0.256866] [<c0013490>] (msm7x30_init+0x218/0xb50) from [<c000b6fc>] (customize_machine+0x20/0x2c)
- <1>[ 0.256896] [<c000b6fc>] (customize_machine+0x20/0x2c) from [<c00394e0>] (do_one_initcall+0x80/0x1d0)
- <1>[ 0.256927] [<c00394e0>] (do_one_initcall+0x80/0x1d0) from [<c0008644>] (kernel_init+0xb0/0x174)
- <1>[ 0.256958] [<c0008644>] (kernel_init+0xb0/0x174) from [<c003b1e0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.256988] ---[ end trace 1b75b31a2719ed1c ]---
- <6>[ 0.360504] sdcc_vreg_en: set vreg_l5 ON
- <6>[ 0.362060] aux_pcm_gpio_init
- <6>[ 0.362152] fsa9480_gpio_init
- <6>[ 0.362213] fg17043_gpio_init
- <6>[ 0.362335] yda165:register yamaha amp device
- <6>[ 0.362335] bt_power_init
- <4>[ 0.363983] aries_init_wifi_mem
- <4>[ 0.364074] aries_init_wifi_mem: WIFI MEM Allocated
- <3>[ 0.364105] rory_init: initalized for rory!
- <3>[ 0.364135] !@#$ android_usb_pdata.num_functions = 6
- <6>[ 0.364135] CS0 MEMORY: cs0 debug mem @ 0x00000000
- <6>[ 0.364166] CS1 MEMORY: cs1 debug mem @ 0x00000001
- <6>[ 0.364227] hw perfevents: enabled with ARMv7 Scorpion PMU driver, 5 counters available
- <6>[ 0.364410] Scorpion registered PMU device
- <5>[ 0.364501] pm8058_init: i2c_add_driver: rc = 0
- <6>[ 0.364746] pm8058_probe: PMIC revision: E3
- <6>[ 0.366760] pm8058_gpio_probe: gpiochip_add(): rc=0
- <6>[ 0.367095] pm8058_mpp_probe: gpiochip_add(): rc=0
- <4>[ 0.373413] bio: create slab <bio-0> at 0
- <5>[ 0.373748] pmic8058_pwm_probe: OK
- <5>[ 0.374145] SCSI subsystem initialized
- <6>[ 0.374359] usbcore: registered new interface driver usbfs
- <6>[ 0.374450] usbcore: registered new interface driver hub
- <6>[ 0.374542] usbcore: registered new device driver usb
- <6>[ 0.374816] i2c-gpio i2c-gpio.5: using pins 87 (SDA) and 88 (SCL)
- <6>[ 0.374938] i2c-gpio i2c-gpio.4: using pins 17 (SDA) and 30 (SCL)
- <6>[ 0.375091] i2c-gpio i2c-gpio.9: using pins 33 (SDA) and 31 (SCL)
- <6>[ 0.375244] i2c-gpio i2c-gpio.14: using pins 128 (SDA) and 124 (SCL)
- <6>[ 0.375396] i2c-gpio i2c-gpio.10: using pins 35 (SDA) and 36 (SCL)
- <6>[ 0.375610] i2c-gpio i2c-gpio.20: using pins 174 (SDA) and 177 (SCL)
- <6>[ 0.375793] i2c-gpio i2c-gpio.8: using pins 1 (SDA) and 0 (SCL)
- <6>[ 0.375946] i2c-gpio i2c-gpio.11: using pins 181 (SDA) and 82 (SCL)
- <6>[ 0.376037] msm_i2c_probe
- <6>[ 0.376129] msm_i2c_probe: clk_ctl 35d, 100000 Hz
- <6>[ 0.376739] Advanced Linux Sound Architecture Driver Version 1.0.23.
- <6>[ 0.377136] Bluetooth: Core ver 2.15
- <6>[ 0.377197] NET: Registered protocol family 31
- <6>[ 0.377197] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.377197] Bluetooth: HCI socket layer initialized
- <6>[ 0.377319] Switching to clocksource gp_timer
- <6>[ 0.382232] NET: Registered protocol family 2
- <6>[ 0.382354] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.382659] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.382965] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.383148] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 0.383178] TCP reno registered
- <6>[ 0.383178] UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.383209] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.383331] NET: Registered protocol family 1
- <6>[ 0.383605] RPC: Registered udp transport module.
- <6>[ 0.383605] RPC: Registered tcp transport module.
- <6>[ 0.383605] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 0.383789] Trying to unpack rootfs image as initramfs...
- <6>[ 0.420959] Freeing initrd memory: 600K
- <6>[ 0.421112] PMU: registered new PMU device of type 0
- <6>[ 0.421813] sdio_al:SDIO-AL SW version 1.30
- <6>[ 0.422210] smd probe
- <6>[ 0.422241] smd_core_init()
- <6>[ 0.422302] smd_core_init() done
- <6>[ 0.422302] smd_alloc_loopback_channel: 'local_loopback' cid=100
- <4>[ 0.422485] get_nand_partitions: no flash partition table in shared memory
- <6>[ 0.423187] smd_alloc_channel() 'DS' cid=0
- <6>[ 0.423309] smd_alloc_channel() 'DIAG' cid=1
- <6>[ 0.423370] smd_alloc_channel() 'RPCCALL' cid=2
- <6>[ 0.423461] smd_alloc_channel() 'DATA1' cid=7
- <6>[ 0.423522] smd_alloc_channel() 'DATA2' cid=8
- <6>[ 0.423614] smd_alloc_channel() 'DATA3' cid=9
- <6>[ 0.423675] smd_alloc_channel() 'DATA4' cid=10
- <6>[ 0.423767] smd_alloc_channel() 'DAL00' cid=38
- <6>[ 0.423828] smd_alloc_channel() 'BRG_0' cid=39
- <3>[ 0.423950] Notify: smsm init
- <6>[ 0.425811] SMD Packet Port Driver Initialized.
- <6>[ 0.426391] SMD: ch 2 0 -> 1
- <6>[ 0.426513] SMD: ch 2 1 -> 2
- <6>[ 0.426788] [afe.c:afe_init] AFE driver init
- <6>[ 0.427337] [audpp.c:audpp_probe] Number of decoder supported 5
- <6>[ 0.427337] [audpp.c:audpp_probe] Number of concurrency supported 7
- <6>[ 0.427368] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
- <6>[ 0.427368] [audpp.c:audpp_probe] queueid:17
- <6>[ 0.427398] [audpp.c:audpp_probe] decid:4
- <6>[ 0.427398] [audpp.c:audpp_probe] nr_codec_support:1
- <6>[ 0.427398] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
- <6>[ 0.427398] [audpp.c:audpp_probe] queueid:16
- <6>[ 0.427429] [audpp.c:audpp_probe] decid:3
- <6>[ 0.427429] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.427429] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
- <6>[ 0.427459] [audpp.c:audpp_probe] queueid:15
- <6>[ 0.427459] [audpp.c:audpp_probe] decid:2
- <6>[ 0.427459] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.427490] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
- <6>[ 0.427490] [audpp.c:audpp_probe] queueid:14
- <6>[ 0.427490] [audpp.c:audpp_probe] decid:1
- <6>[ 0.427520] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.427520] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
- <6>[ 0.427520] [audpp.c:audpp_probe] queueid:13
- <6>[ 0.427520] [audpp.c:audpp_probe] decid:0
- <6>[ 0.427551] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.428375] [snddev_ecodec.c:snddev_ecodec_init] snddev_ecodec_init
- <6>[ 0.431945] SMD: ch 38 0 -> 1
- <6>[ 0.432067] SMD: ch 38 1 -> 2
- <3>[ 0.433837] rpcrouter: Server create rejected, version = 0, program = 3000001f
- <6>[ 0.439727] [adsp.c:adsp_rtos_mtoa_cb] INIT_INFO Event
- <6>[ 0.439819] [adsp.c:adsp_init] msm_adsp -- 0
- <6>[ 0.440124] [lpa.c:lpa_probe] lpa probe
- <6>[ 0.440338] audio_mvs_init:
- <6>[ 0.440429] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- <6>[ 0.440460] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- <4>[ 0.440521] rfkill_register : bt_sleep
- <6>[ 0.440673] Bluetooth: bluesleep_init : check point 1 : retval - 0
- <6>[ 0.440704] Bluetooth: bluesleep_init : check point 2
- <6>[ 0.440704] Bluetooth: bluesleep_init : check point 3
- <6>[ 0.440734] Bluetooth: bluesleep_init : check point 4
- <6>[ 0.440734] Bluetooth: bluesleep_init : check point 5
- <6>[ 0.440734] Bluetooth: bluesleep_init : check point 6
- <6>[ 0.440765] Bluetooth: bluesleep_init : check point 7
- <4>[ 0.440887] [VIB] msm_vibrator_probe
- <4>[ 0.440917] [VIB] android vib clk is successful
- <4>[ 0.440917] [VIB] vibe_set_pwm_freq, g_nForce_32 : 33000
- <4>[ 0.440948] [VIB] fe2f, b9c40000, 100
- <4>[ 0.441009] [VIB] platform driver register result : 0
- <6>[ 0.441009] param_init: init
- <6>[ 0.441223] rmt_storage_get_ramfs: RAMFS entry: addr = 0x07700000, size = 0x00300000
- <6>[ 0.441345] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
- <3>[ 0.445343] msm_rpc_client_req2: RPC call was not successful (3)
- <3>[ 0.445343] rmt_storage_reg_cb: Failed to register callback for event 7
- <6>[ 0.445343] rmt_storage_probe: unable to register alloc rmt buf callback -22
- <6>[ 0.445892] kernel_sec_debug_init
- <6>[ 0.445922] crit_kmsg_init
- <6>[ 0.445922] crit_kmsg_register_proc_entry
- <6>[ 0.445922] sleep_debug_init
- <6>[ 0.446228] ashmem: initialized
- <7>[ 0.447448] yaffs built Apr 19 2012 23:21:06 Installing.
- <6>[ 0.447479] msgmni has been set to 740
- <4>[ 0.447814] cryptomgr_test used greatest stack depth: 6444 bytes left
- <4>[ 0.447998] cryptomgr_test used greatest stack depth: 6248 bytes left
- <4>[ 0.449920] cryptomgr_test used greatest stack depth: 6236 bytes left
- <6>[ 0.450164] alg: No test for stdrng (krng)
- <6>[ 0.450225] io scheduler noop registered
- <6>[ 0.450286] io scheduler cfq registered (default)
- <6>[ 0.451354] msm_fb_probe: phy_Addr = 0x1497000 virt = 0xe1000000
- <6>[ 0.451904] MDP HW Base phy_Address = 0xa3f00000 virt = 0xe0900000
- <6>[ 0.451965] mdp_hw_version: mdp_hw_revision=2
- <6>[ 0.454406] mdp4_fetch_cfg: dmap=27 vg=43
- <4>[ 0.454864] s6d05a1 start lcdc_s6d05a1_panel_init
- <4>[ 0.454895] s6d05a1 start s6d05a1_probe
- <4>[ 0.454986] s6d05a1 start s6d05a1_esd_irq_handler (display_on=0,disp_initialized=0)
- <6>[ 0.455505] mdp4_display_intf_sel: 0x8
- <6>[ 0.487426] mdp4_overlay_pipe_alloc: pipe=c08131e8 ndx=1 num=0 share=0 cnt=0
- <6>[ 0.487457] @LCDINIT@:CHECK VDD VCC - on: 0x1, gp6_cnt: 0, gp9_cnt: 0
- <6>[ 0.487487] @LCDINIT@:POWER VDD VCC - on: 0x1
- <6>[ 0.489410] @LCDINIT@:DELAY with 300 msec.
- <6>[ 0.797882] @LCDINIT@:LCD RST high with 0x1
- <4>[ 0.859100] lcdc_on swapper: 1
- <6>[ 0.859100] @LCDINIT@:DOTCLK clock enabled
- <6>[ 0.887695] @LCDINIT@:LCDC BLOCK enabled
- <4>[ 0.887695] s6d05a1 start lcdc_s6d05a1_panel_on, bring_up 0, disp_initialized 0
- <4>[ 0.887847] s6d05a1 lcdc_s6d05a1_panel_on, lcd is SMD panel!
- <4>[ 0.890502] Console: switching to colour frame buffer device 40x30
- <6>[ 0.904144] FrameBuffer[0] 320x480 size=1228800 bytes is registered successfully!
- <7>[ 0.909118] Registered led device: lcd-backlight
- <6>[ 0.909698]
- <6>[ 0.909698] msm_vidc_dec: Inside vid_dec_init()
- <6>[ 0.909912]
- <6>[ 0.909912] msm_vidc_dec: Inside vid_dec_vcd_init()
- <6>[ 0.909942]
- <6>[ 0.909942] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 0.910095]
- <6>[ 0.910095] msm_vidc_enc: Inside vid_enc_vcd_init()
- <3>[ 0.910125]
- <3>[ 0.910125] err: Device config mismatch
- <6>[ 0.911254] msm_serial: driver initialized
- <6>[ 0.911468] msm_serial_hs.0: ttyHS0 at MMIO 0xa3300000 (irq = 73) is a MSM HS UART
- <6>[ 0.911773] msm_serial_hs module loaded
- <6>[ 0.913757] brd: module loaded
- <6>[ 0.915679] loop: module loaded
- <6>[ 0.915802] pmem: Initializing pmem (user-space) as cached
- <6>[ 0.916320] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
- <6>[ 0.916381] pmem: Initializing pmem_adsp (user-space) as non-cached
- <6>[ 0.916595] pmem: Initializing pmem_audio (user-space) as non-cached
- <5>[ 0.916992] pmic8058_nfc_probe: OK
- <5>[ 0.917144] pmic8058_upl_probe: OK
- <6>[ 0.917297] [H2W] h2w_init JACK_S_35(142), SEND_END(44)
- <6>[ 0.917327] [H2W] h2w_probe [H2W] Registering H2W (headset) driver with EAR_DET : 142, MICBIAS_EN : 160
- <6>[ 0.917327]
- <6>[ 0.917846] [H2W] h2w_probe Headset Driver: Start gpio inputs for h2w in interrupt mode
- <6>[ 0.917877]
- <6>[ 0.918060] input: sec_jack as /devices/virtual/input/input0
- <6>[ 0.918121] __msm_rpc_connect: server not found 30000089:20001
- <6>[ 0.918121] __msm_rpc_connect: server not found 30000089:10001
- <4>[ 0.918212] detect_irq_handler
- <6>[ 0.918548] msm_timpani_setup_power
- <6>[ 0.924926] adie_codec_register_codec_operations: codec type 1
- <6>[ 0.925659] SCSI Media Changer driver v0.25
- <6>[ 0.926208] PPP generic driver version 2.4.2
- <6>[ 0.926391] PPP Deflate Compression module registered
- <6>[ 0.926422] PPP BSD Compression module registered
- <6>[ 0.927154] PPP MPPE Compression module registered
- <6>[ 0.927185] NET: Registered protocol family 24
- <6>[ 0.927215] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 0.927246] CSLIP: code copyright 1989 Regents of the University of California.
- <4>[ 0.927551] rmnet_init
- <6>[ 0.931030] rmnet_init
- <6>[ 0.933715] msm_hsusb_ldo_init: vreg_3p3 voltage:3075
- <6>[ 0.934112] msm_hsusb_ldo_enable: 1
- <6>[ 0.934326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.934448] host driver registered w/ tranceiver
- <6>[ 0.934631] usbcore: registered new interface driver cdc_acm
- <6>[ 0.934631] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.934631] Initializing USB Mass Storage driver...
- <6>[ 0.934692] usbcore: registered new interface driver usb-storage
- <6>[ 0.934722] USB Mass Storage support registered.
- <6>[ 0.934753] usbcore: registered new interface driver ums-alauda
- <6>[ 0.934814] usbcore: registered new interface driver ums-cypress
- <6>[ 0.934875] usbcore: registered new interface driver ums-datafab
- <6>[ 0.934906] usbcore: registered new interface driver ums-freecom
- <6>[ 0.934967] usbcore: registered new interface driver ums-isd200
- <6>[ 0.935028] usbcore: registered new interface driver ums-jumpshot
- <6>[ 0.935089] usbcore: registered new interface driver ums-karma
- <6>[ 0.935119] usbcore: registered new interface driver ums-onetouch
- <6>[ 0.935180] usbcore: registered new interface driver ums-sddr09
- <6>[ 0.935211] usbcore: registered new interface driver ums-sddr55
- <6>[ 0.935272] usbcore: registered new interface driver ums-usbat
- <6>[ 0.935333] usbcore: registered new interface driver usb_ehset_test
- <6>[ 0.935546] peripheral driver registered w/ tranceiver
- <4>[ 0.935729] serial_number[M930108D0FC3]
- <6>[ 0.935943] android_usb gadget: android_usb ready
- <6>[ 0.936065] f_acm init
- <6>[ 0.936218] DUN is registerd
- <6>[ 0.936645] acmdata_register
- <4>[ 0.937591] android_usb gadget: using random self ethernet address
- <4>[ 0.937622] android_usb gadget: using random host ethernet address
- <6>[ 0.938049] usb0: MAC 9a:09:76:ef:48:c3
- <6>[ 0.938049] usb0: HOST MAC 0a:10:0b:9a:25:08
- <4>[ 0.938262] ------------[ cut here ]------------
- <4>[ 0.938293] WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x70/0x90()
- <4>[ 0.938293] sysfs: cannot create duplicate filename '/devices/platform/msm_hsusb/gadget/tty/ttyGS0'
- <4>[ 0.938293] Modules linked in:
- <1>[ 0.938323] [<c004070c>] (unwind_backtrace+0x0/0x164) from [<c059d6a4>] (dump_stack+0x18/0x1c)
- <1>[ 0.938354] [<c059d6a4>] (dump_stack+0x18/0x1c) from [<c00de47c>] (warn_slowpath_common+0x54/0x6c)
- <1>[ 0.938385] [<c00de47c>] (warn_slowpath_common+0x54/0x6c) from [<c00de538>] (warn_slowpath_fmt+0x38/0x40)
- <1>[ 0.938415] [<c00de538>] (warn_slowpath_fmt+0x38/0x40) from [<c01a5558>] (sysfs_add_one+0x70/0x90)
- <1>[ 0.938446] [<c01a5558>] (sysfs_add_one+0x70/0x90) from [<c01a60a4>] (create_dir+0x6c/0xb8)
- <1>[ 0.938476] [<c01a60a4>] (create_dir+0x6c/0xb8) from [<c01a61b4>] (sysfs_create_dir+0xc4/0xe0)
- <1>[ 0.938476] [<c01a61b4>] (sysfs_create_dir+0xc4/0xe0) from [<c027225c>] (kobject_add_internal+0x16c/0x274)
- <1>[ 0.938507] [<c027225c>] (kobject_add_internal+0x16c/0x274) from [<c0272460>] (kobject_add_varg+0x40/0x50)
- <1>[ 0.938537] [<c0272460>] (kobject_add_varg+0x40/0x50) from [<c0272508>] (kobject_add+0x54/0x60)
- <1>[ 0.938568] [<c0272508>] (kobject_add+0x54/0x60) from [<c02ee0dc>] (device_add+0xfc/0x510)
- <1>[ 0.938598] [<c02ee0dc>] (device_add+0xfc/0x510) from [<c02ee50c>] (device_register+0x1c/0x20)
- <1>[ 0.938598] [<c02ee50c>] (device_register+0x1c/0x20) from [<c02ee58c>] (device_create_vargs+0x7c/0xac)
- <1>[ 0.938629] [<c02ee58c>] (device_create_vargs+0x7c/0xac) from [<c02ee5e4>] (device_create+0x28/0x30)
- <1>[ 0.938659] [<c02ee5e4>] (device_create+0x28/0x30) from [<c02be434>] (tty_register_device+0xb4/0xd0)
- <1>[ 0.938659] [<c02be434>] (tty_register_device+0xb4/0xd0) from [<c038100c>] (gserial_setup+0x20c/0x32c)
- <1>[ 0.938690] [<c038100c>] (gserial_setup+0x20c/0x32c) from [<c03820f0>] (fserial_modem_bind_config+0x20/0x3c)
- <1>[ 0.938720] [<c03820f0>] (fserial_modem_bind_config+0x20/0x3c) from [<c037c3c8>] (bind_functions+0x70/0xb4)
- <1>[ 0.938751] [<c037c3c8>] (bind_functions+0x70/0xb4) from [<c037c9e4>] (android_register_function+0xac/0xe8)
- <1>[ 0.938781] [<c037c9e4>] (android_register_function+0xac/0xe8) from [<c0024c60>] (diag_probe+0x158/0x1a0)
- <1>[ 0.938812] [<c0024c60>] (diag_probe+0x158/0x1a0) from [<c02f2510>] (platform_drv_probe+0x20/0x24)
- <1>[ 0.938842] [<c02f2510>] (platform_drv_probe+0x20/0x24) from [<c02f11f0>] (driver_probe_device+0x188/0x31c)
- <1>[ 0.938842] [<c02f11f0>] (driver_probe_device+0x188/0x31c) from [<c02f13ec>] (__driver_attach+0x68/0x8c)
- <1>[ 0.938873] [<c02f13ec>] (__driver_attach+0x68/0x8c) from [<c02f06f0>] (bus_for_each_dev+0x50/0x84)
- <1>[ 0.938903] [<c02f06f0>] (bus_for_each_dev+0x50/0x84) from [<c02f0e50>] (driver_attach+0x20/0x28)
- <1>[ 0.938934] [<c02f0e50>] (driver_attach+0x20/0x28) from [<c02efea4>] (bus_add_driver+0xf0/0x294)
- <1>[ 0.938934] [<c02efea4>] (bus_add_driver+0xf0/0x294) from [<c02f1700>] (driver_register+0xb0/0x140)
- <1>[ 0.938964] [<c02f1700>] (driver_register+0xb0/0x140) from [<c02f2974>] (platform_driver_register+0x4c/0x60)
- <1>[ 0.938995] [<c02f2974>] (platform_driver_register+0x4c/0x60) from [<c02f29a8>] (platform_driver_probe+0x20/0xb4)
- <1>[ 0.939025] [<c02f29a8>] (platform_driver_probe+0x20/0xb4) from [<c0024afc>] (usb_diag_init+0x18/0x24)
- <1>[ 0.939056] [<c0024afc>] (usb_diag_init+0x18/0x24) from [<c00394e0>] (do_one_initcall+0x80/0x1d0)
- <1>[ 0.939056] [<c00394e0>] (do_one_initcall+0x80/0x1d0) from [<c0008644>] (kernel_init+0xb0/0x174)
- <1>[ 0.939086] [<c0008644>] (kernel_init+0xb0/0x174) from [<c003b1e0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.939117] ---[ end trace 1b75b31a2719ed1d ]---
- <3>[ 0.939117] kobject_add_internal failed for ttyGS0 with -EEXIST, don't try to register things with the same name in the same directory.
- <1>[ 0.939147] [<c004070c>] (unwind_backtrace+0x0/0x164) from [<c059d6a4>] (dump_stack+0x18/0x1c)
- <1>[ 0.939178] [<c059d6a4>] (dump_stack+0x18/0x1c) from [<c02722f8>] (kobject_add_internal+0x208/0x274)
- <1>[ 0.939178] [<c02722f8>] (kobject_add_internal+0x208/0x274) from [<c0272460>] (kobject_add_varg+0x40/0x50)
- <1>[ 0.939208] [<c0272460>] (kobject_add_varg+0x40/0x50) from [<c0272508>] (kobject_add+0x54/0x60)
- <1>[ 0.939239] [<c0272508>] (kobject_add+0x54/0x60) from [<c02ee0dc>] (device_add+0xfc/0x510)
- <1>[ 0.939270] [<c02ee0dc>] (device_add+0xfc/0x510) from [<c02ee50c>] (device_register+0x1c/0x20)
- <1>[ 0.939270] [<c02ee50c>] (device_register+0x1c/0x20) from [<c02ee58c>] (device_create_vargs+0x7c/0xac)
- <1>[ 0.939300] [<c02ee58c>] (device_create_vargs+0x7c/0xac) from [<c02ee5e4>] (device_create+0x28/0x30)
- <1>[ 0.939331] [<c02ee5e4>] (device_create+0x28/0x30) from [<c02be434>] (tty_register_device+0xb4/0xd0)
- <1>[ 0.939331] [<c02be434>] (tty_register_device+0xb4/0xd0) from [<c038100c>] (gserial_setup+0x20c/0x32c)
- <1>[ 0.939361] [<c038100c>] (gserial_setup+0x20c/0x32c) from [<c03820f0>] (fserial_modem_bind_config+0x20/0x3c)
- <1>[ 0.939392] [<c03820f0>] (fserial_modem_bind_config+0x20/0x3c) from [<c037c3c8>] (bind_functions+0x70/0xb4)
- <1>[ 0.939422] [<c037c3c8>] (bind_functions+0x70/0xb4) from [<c037c9e4>] (android_register_function+0xac/0xe8)
- <1>[ 0.939422] [<c037c9e4>] (android_register_function+0xac/0xe8) from [<c0024c60>] (diag_probe+0x158/0x1a0)
- <1>[ 0.939453] [<c0024c60>] (diag_probe+0x158/0x1a0) from [<c02f2510>] (platform_drv_probe+0x20/0x24)
- <1>[ 0.939483] [<c02f2510>] (platform_drv_probe+0x20/0x24) from [<c02f11f0>] (driver_probe_device+0x188/0x31c)
- <1>[ 0.939514] [<c02f11f0>] (driver_probe_device+0x188/0x31c) from [<c02f13ec>] (__driver_attach+0x68/0x8c)
- <1>[ 0.939544] [<c02f13ec>] (__driver_attach+0x68/0x8c) from [<c02f06f0>] (bus_for_each_dev+0x50/0x84)
- <1>[ 0.939544] [<c02f06f0>] (bus_for_each_dev+0x50/0x84) from [<c02f0e50>] (driver_attach+0x20/0x28)
- <1>[ 0.939575] [<c02f0e50>] (driver_attach+0x20/0x28) from [<c02efea4>] (bus_add_driver+0xf0/0x294)
- <1>[ 0.939605] [<c02efea4>] (bus_add_driver+0xf0/0x294) from [<c02f1700>] (driver_register+0xb0/0x140)
- <1>[ 0.939605] [<c02f1700>] (driver_register+0xb0/0x140) from [<c02f2974>] (platform_driver_register+0x4c/0x60)
- <1>[ 0.939636] [<c02f2974>] (platform_driver_register+0x4c/0x60) from [<c02f29a8>] (platform_driver_probe+0x20/0xb4)
- <1>[ 0.939666] [<c02f29a8>] (platform_driver_probe+0x20/0xb4) from [<c0024afc>] (usb_diag_init+0x18/0x24)
- <1>[ 0.939697] [<c0024afc>] (usb_diag_init+0x18/0x24) from [<c00394e0>] (do_one_initcall+0x80/0x1d0)
- <1>[ 0.939697] [<c00394e0>] (do_one_initcall+0x80/0x1d0) from [<c0008644>] (kernel_init+0xb0/0x174)
- <1>[ 0.939727] [<c0008644>] (kernel_init+0xb0/0x174) from [<c003b1e0>] (kernel_thread_exit+0x0/0x8)
- <4>[ 0.939758] gserial_setup: no classdev for port 0, err -17
- <6>[ 0.940155] diagfwd initializing ..
- <6>[ 0.940429] SMD: ch 1 0 -> 1
- <6>[ 0.940460] diag opened SMD port ; r = 0
- <6>[ 0.940521] SMD: ch 1 1 -> 2
- <6>[ 0.940551] diagchar initializing ..
- <6>[ 0.940765] diagchar initialized
- <6>[ 0.941131] input: vital2-keypad as /devices/i2c-6/6-0055/pm8058-keypad/input/input1
- <4>[ 0.941955] [input_report_switch] slide_int - !gpio_hall_ic CLOSE
- <4>[ 0.942291] pmic8058_kp_probe - system_rev : 10, is_early_suspend : 1
- <7>[ 0.942962] RTC Registering with rs30000048
- <4>[ 0.943206] [input_report_switch] slide_int on hall_ic_irq() - !gpio_hall_ic CLOSE
- <7>[ 0.943664] msmrtc_rpc_proc_result: RPC client reply for PROC=12 success
- <6>[ 0.944122] RPC CALL -- TOD TIME UPDATE: ttick = 393296
- <6>[ 0.944152] stamp=53425974368305152, freq = 795108726
- <3>[ 0.944152] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <7>[ 0.944427] msmrtc_rpc_proc_result: RPC client reply for PROC=17 success
- <6>[ 0.944885] using rtc device, msm_rtc, for alarms
- <7>[ 0.944885] msm_rtc: dev (254:0)
- <6>[ 0.944915] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
- <7>[ 0.945098] msm_rtc_secure: dev (254:1)
- <6>[ 0.945098] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
- <6>[ 0.945190] i2c /dev entries driver
- <6>[ 0.946289] yda165:yda165_init
- <6>[ 0.946319] yda165:yda165_probe
- <6>[ 0.946441] yda165:load_ampgain completed
- <6>[ 0.946563] [FSA9480]: probe
- <6>[ 0.946563] fsa_vreg_en: 1
- <6>[ 0.946960] [FSA9480]: init
- <4>[ 0.947998] [FSA9480]: Initial control reg 0x02 : 0x1e
- <6>[ 0.948822] [FSA9480]: fsa9480 sensor init sequence done
- <4>[ 0.951080] Current USB Owner -> PDA
- <4>[ 0.951110] [FSA9480]Current UART Owner on Booting -> MSM
- <6>[ 0.951293] input: dock as /devices/virtual/input/input2
- <6>[ 0.951507] [FSA9480]: probe complete
- <6>[ 0.951599] kr3dh 8-0009: kr3dm_accel_driver probe start!!
- <6>[ 0.952178] kr3dh 8-0009: device id=12: kr3dm_accel found
- <4>[ 0.954284] kr3dh_set_delay actual_delay(delay)[100] kr3dh->odr[200]
- <6>[ 0.954467] input: accelerometer as /devices/virtual/input/input3
- <6>[ 0.954620] kr3dh 8-0009: kr3dm_accel_driver probe complete!!
- <6>[ 0.954864] input: geomagnetic as /devices/platform/i2c-gpio.8/i2c-8/8-002e/input/input4
- <6>[ 0.955200] input: geomagnetic_raw as /devices/platform/i2c-gpio.8/i2c-8/8-002e/input/input5
- <6>[ 0.955322] geomagnetic_probe start on h/w revision 10.
- <4>[ 0.955810] sensor_probe: probe.
- <6>[ 0.955993] input: orientation as /devices/virtual/input/input6
- <4>[ 0.956176] sensor_probe: complete.
- <4>[ 0.956298] gp2a_opt_probe(713): <6>gp2a_opt_probe proximity is start
- <4>[ 0.956329] gp2a_opt_probe(740): <6>gp2a_opt_probe proximity regiter workfunc!!
- <6>[ 0.956481] input: proximity as /devices/virtual/input/input7
- <4>[ 0.956665] opt_i2c_probe(998): <6>
- <4>[ 0.956665] opt_i2c_probe(1010): <6>GP2A opt i2c attach success!!!
- <4>[ 0.956726] gp2a_opt_probe(770): <6>opt_i2c_client : (0xdfcbcaa0)
- <4>[ 0.957061] gp2a_opt_probe(802): <6>gp2a_opt_probe proximity is OK!!
- <6>[ 0.957794] input: light as /devices/virtual/input/input8
- <4>[ 0.957977] lightsensor_rpc_init(672): <6>
- <6>[ 0.958007] __msm_rpc_connect: server not found 30000089:20001
- <6>[ 0.958038] __msm_rpc_connect: server not found 30000089:10001
- <6>[ 0.958129] [FSA9480]: interrupt called
- <4>[ 0.962463] [FSA9480] dev1=0x4, dev2=0x0, intr1=0x0, intr2=0x0
- <4>[ 0.962493] [FSA9480] carkit_int1=0x0, carkit_int2=0x0, valid_5v=0x2
- <4>[ 0.963043] [FSA9480] control_reg : 0x1e
- <4>[ 0.964111] [FSA9480 : dev1 = 0x4, dev2 = 0x0
- <6>[ 0.964141] [FSA9480:fsa9480_process_device] dev1:4 dev2:0 attach:1
- <4>[ 0.964141] [FSA9480]USB --- ATTACH
- <3>[ 0.964569] [BATT] batt_restart: Battery driver is not ready !!
- <4>[ 0.964691] l3g4200d_init
- <6>[ 0.964691] L3G4200D init driver
- <6>[ 0.964843] IR NEC protocol handler initialized
- <6>[ 0.964843] IR RC5(x) protocol handler initialized
- <6>[ 0.964843] IR RC6 protocol handler initialized
- <6>[ 0.964874] IR JVC protocol handler initialized
- <6>[ 0.964874] IR Sony protocol handler initialized
- <6>[ 0.964874] Linux video capture interface: v2.00
- <4>[ 0.965332] [PGH] s5k5cc_init/1972
- <4>[ 0.965393] [PGH] __s5k5cc_probe/1958
- <3>[ 0.965393] msm_camera_drv_start: msm_camera start!!
- <4>[ 0.965972] [PGH] s5k5cc_sensor_probe/1923
- <4>[ 0.966003] [PGH] s5k5cc_i2c_probe/1848
- <4>[ 0.966033] [PGH] s5k5cc_probe succeeded! s5k5cc_i2c_probe/1867
- <4>[ 0.966094] [PGH] s5k5cc_sensor_probe/1929
- <4>[ 0.966094] [PGH] s5k5cc_client->addr : 3c
- <4>[ 0.966094] [PGH] s5k5cc_client->adapter->nr : 4
- <6>[ 0.966644] msm_sync_init: initialized s5k5ccgx
- <3>[ 0.966644] msm_device_init: msm_device_init start!!
- <4>[ 0.967071] [PGH] 1 s5k6aafx_init/1324
- <4>[ 0.967224] [SR130PC10] sr130pc10_init/850
- <4>[ 0.967376] [sr030pc30] sr030pc30_init/899
- <4>[ 0.967437] [sr030pc30] __sr030pc30_probe/885
- <3>[ 0.967437] msm_camera_drv_start: msm_camera start!!
- <4>[ 0.968048] [sr030pc30] sr030pc30_i2c_probe/809
- <4>[ 0.968048] [sr030pc30] sr030pc30_probe succeeded! sr030pc30_i2c_probe/829
- <4>[ 0.968109] [sr030pc30] sr030pc30_sensor_probe/866
- <4>[ 0.968109] [sr030pc30] sr030pc30_client->addr : 30
- <4>[ 0.968139] [sr030pc30] sr030pc30_client->adapter->nr : 20
- <6>[ 0.968597] msm_sync_init: initialized sr030pc30
- <3>[ 0.968597] msm_device_init: msm_device_init start!!
- <6>[ 0.969268] msm_gemini_init gemini: success
- <6>[ 0.969360] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
- <6>[ 0.969757] __msm_rpc_connect: server not found 30000089:40001
- <6>[ 0.969757] __msm_rpc_connect: server not found 30000089:10001
- <6>[ 0.969787] __msm_rpc_connect: server not found 30000089:20001
- <6>[ 0.973999] [BATT] msm_batt_cable_status_update: charger_type = 2 (0:none, 1:TA, 2:USB)
- <6>[ 0.973999] [BATT] msm_batt_chg_en: Start charging! (charging_source = USB)
- <6>[ 0.974029]
- <6>[ 0.974029] Charger Type: STD DOWNSTREAM PORT
- <6>[ 0.974822] msm_chg_usb_i_is_available(450) (rpc success)
- <6>[ 0.975402] [BATT] msm_batt_cable_status_update: power_supply_changed !
- <6>[ 0.975524] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
- <6>[ 0.976257] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- <6>[ 0.976318] Bluetooth: HCI UART driver ver 2.2
- <6>[ 0.976318] Bluetooth: HCI H4 protocol initialized
- <6>[ 0.976348] Bluetooth: HCI_IBS protocol initialized
- <6>[ 0.976348] bluetooth_power_init
- <4>[ 0.976440] bt_power_probe
- <4>[ 0.976470] bluetooth_power_rfkill_probe
- <4>[ 0.976470] rfkill_register : bt_power
- <3>[ 0.977020] mmc0 sdhci: card present state=0x1(1).
- <3>[ 0.977355] mmc0: No card detect facilities available
- <6>[ 0.977600] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 8
- <6>[ 0.977600] mmc0: 8 bit data mode enabled
- <6>[ 0.977630] mmc0: 4 bit data mode disabled
- <6>[ 0.977630] mmc0: polling status mode disabled
- <6>[ 0.977630] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 96000000 Hz
- <6>[ 0.977661] mmc0: Slot eject status = 0
- <6>[ 0.977661] mmc0: Power save feature enable = 1
- <6>[ 0.977661] mmc0: DM non-cached buffer at ff020000, dma_addr 0x4f4fe000
- <6>[ 0.977691] mmc0: DM cmd busaddr 0x4f4fe000, cmdptr busaddr 0x4f4fe300
- <3>[ 0.977783] mmc1 sdhci: card present state=0x1(1).
- <6>[ 0.978210] mmc1: Qualcomm MSM SDCC at 0x00000000a3000000 irq 96,0 dma 8
- <6>[ 0.978210] mmc1: 8 bit data mode disabled
- <6>[ 0.978240] mmc1: 4 bit data mode enabled
- <6>[ 0.978240] mmc1: polling status mode disabled
- <6>[ 0.978240] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 96000000 Hz
- <6>[ 0.978271] mmc1: Slot eject status = 1
- <6>[ 0.978271] mmc1: Power save feature enable = 1
- <6>[ 0.978271] mmc1: DM non-cached buffer at ff021000, dma_addr 0x4f500000
- <6>[ 0.978302] mmc1: DM cmd busaddr 0x4f500000, cmdptr busaddr 0x4f500300
- <3>[ 0.978332] mmc2 sdhci: card present state=0x1(1).
- <6>[ 0.978820] mmc2: Qualcomm MSM SDCC at 0x00000000a3100000 irq 100,537 dma 8
- <6>[ 0.978851] mmc2: 8 bit data mode disabled
- <6>[ 0.978851] mmc2: 4 bit data mode enabled
- <6>[ 0.978851] mmc2: polling status mode disabled
- <6>[ 0.978881] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 96000000 Hz
- <6>[ 0.978881] mmc2: Slot eject status = 0
- <6>[ 0.978881] mmc2: Power save feature enable = 1
- <6>[ 0.978912] mmc2: DM non-cached buffer at ff022000, dma_addr 0x4f502000
- <6>[ 0.978912] mmc2: DM cmd busaddr 0x4f502000, cmdptr busaddr 0x4f502300
- <7>[ 0.979248] Registered led device: keyboard-backlight
- <7>[ 0.979339] Registered led device: blue
- <7>[ 0.979400] Registered led device: red
- <7>[ 0.979461] Registered led device: button-backlight
- <6>[ 0.980468] usbcore: registered new interface driver usbhid
- <6>[ 0.980468] usbhid: USB HID core driver
- <6>[ 0.980895] msm_chg_usb_i_is_available(0) (rpc success)
- <6>[ 0.980926] [BATT] msm_batt_chg_en: Stop charging! (charging_source = 0x2, full_check = 0)
- <6>[ 0.997680] [BATT] msm_batt_chg_en: Start charging! (charging_source = USB)
- <6>[ 0.997711]
- <6>[ 0.997711] Charger Type: STD DOWNSTREAM PORT
- <6>[ 0.998352] msm_chg_usb_i_is_available(450) (rpc success)
- <6>[ 1.005737] [BATT] msm_batt_update_psy_status: chg_current = 37, Temperature = 293, V_F = 624, (from CP)
- <6>[ 1.007995] [BATT] msm_batt_update_psy_status: Voltage = 3925, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
- <6>[ 1.022186] [BATT] msm_batt_update_psy_status: chg_current = 496, Temperature = 293, V_F = 624, (from CP)
- <6>[ 1.024414] [BATT] msm_batt_update_psy_status: Voltage = 3925, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
- <4>[ 1.088378]
- <4>[ 1.088378] ========== kernel thread : gaf-proc ==========
- <4>[ 1.088378] task_struct at df5209c0
- <4>[ 1.088409] thread_info at df52a000
- <4>[ 1.088409]
- <4>[ 1.088409] saved_cpu_context at df52a01c
- <4>[ 1.088409] df52a01c r4 :df5209c0 r5 :df52a000 r6 :00000000 r7 :c07bf0a0
- <4>[ 1.088439] df52a02c r8 :c0805498 r9 :00000000 r10:c059e48c r11:df52bf0c
- <4>[ 1.088439] df52a03c sp :df52bed0 pc :c059dd6c
- <4>[ 1.088439]
- <4>[ 1.088470] searching saved pc which is stopped in down_interruptible() from df52bed0 to df52c000
- <4>[ 1.088470] down_interruptible() is from c00fb41c to c00fb49c
- <4>[ 1.088470]
- <4>[ 1.088500] pc (c00fb464) is found at df52bf90
- <4>[ 1.088500] df52bf64 r4 :xxxxxxxx r5 :c083f72c r6 :c083f72c r7 :df5209c0
- <4>[ 1.088500] df52bf74 r8 :00000000 r9 :df52bfc4 r10:60000013 r11:df52bfcc
- <4>[ 1.088531] df52bf84 r12:c04356b0 sp :df52bfac lr :df52bf98 pc :c00fb464
- <4>[ 1.088531] ===================
- <4>[ 1.088531]
- <4>[ 1.088745] logger: created 512K log 'log_main'
- <4>[ 1.088836] logger: created 256K log 'log_events'
- <4>[ 1.088928] logger: created 256K log 'log_radio'
- <4>[ 1.089019] logger: created 256K log 'log_system'
- <6>[ 1.089599] [DPRAM] SMEM_DPRAM allocation
- <6>[ 1.089599] [DPRAM] SmemBase = 0xfa171e78
- <6>[ 1.089630] smem_do_alloc: id=136 size=32816
- <6>[ 1.089630] DPRAM: extcmd address = 0xfa179e78
- <3>[ 1.090301] pdp_activate, id: 1
- <3>[ 1.090423] ttyCSD(id: 1) serial device is created.
- <3>[ 1.090454] pdp_activate, id: 7
- <3>[ 1.090545] ttyCDMA(id: 7) serial device is created.
- <3>[ 1.090576] pdp_activate, id: 8
- <3>[ 1.090667] ttyEFS(id: 8) serial device is created.
- <3>[ 1.090698] pdp_activate, id: 5
- <3>[ 1.090789] ttyGPS(id: 5) serial device is created.
- <3>[ 1.090820] pdp_activate, id: 6
- <3>[ 1.090911] ttyXTRA(id: 6) serial device is created.
- <3>[ 1.090942] pdp_activate, id: 9
- <3>[ 1.091064] ttyCIQ1(id: 9) serial device is created.
- <3>[ 1.091064] pdp_activate, id: 27
- <3>[ 1.091186] ttyCIQ0(id: 27) serial device is created.
- <3>[ 1.091217] pdp_activate, id: 29
- <3>[ 1.091308] ttyCPLOG(id: 29) serial device is created.
- <6>[ 1.091339] [DPRAM] Register interrupt handler
- <6>[ 1.091613] [DPRAM] $Id: dpram.c,v 3.00 2008/09/09 08:00:00 $
- <4>[ 1.092010] No device for DAI CODEC_DAI
- <4>[ 1.092041] No device for DAI CPU_DAI
- <3>[ 1.092315] msm_soc: create pcms
- <6>[ 1.092468] asoc: CODEC_DAI <-> CPU_DAI mapping ok
- <4>[ 1.093139] No device for DAI MVS_CODEC_DAI
- <4>[ 1.093139] No device for DAI MVS_CPU_DAI
- <6>[ 1.093505] asoc: MVS_CODEC_DAI <-> MVS_CPU_DAI mapping ok
- <6>[ 1.093963] ALSA device list:
- <6>[ 1.093994] #0: msm-audio (MSM-CARD)
- <6>[ 1.093994] #1: msm-mvs-audio (MSM-MVS-CARD)
- <6>[ 1.094055] u32 classifier
- <6>[ 1.094055] Actions configured
- <6>[ 1.094085] Netfilter messages via NETLINK v0.30.
- <6>[ 1.094146] nf_conntrack version 0.5.0 (5921 buckets, 23684 max)
- <6>[ 1.094421] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.094512] xt_time: kernel timezone is -0000
- <6>[ 1.094696] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.094818] arp_tables: (C) 2002 David S. Miller
- <6>[ 1.094879] TCP cubic registered
- <6>[ 1.095062] NET: Registered protocol family 10
- <6>[ 1.095458] lo: Disabled Privacy Extensions
- <6>[ 1.097198] Mobile IPv6
- <6>[ 1.097198] IPv6 over IPv4 tunneling driver
- <6>[ 1.097625] sit0: Disabled Privacy Extensions
- <6>[ 1.098144] ip6tnl0: Disabled Privacy Extensions
- <6>[ 1.098266] NET: Registered protocol family 17
- <6>[ 1.098449] Bluetooth: L2CAP ver 2.14
- <6>[ 1.098449] Bluetooth: L2CAP socket layer initialized
- <6>[ 1.098480] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 1.098480] Bluetooth: SCO socket layer initialized
- <6>[ 1.098571] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.098571] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.098571] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.098602] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.098602] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.098602] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.102050] [voice.c:voice_init]
- <6>[ 1.103179] input: pwr_key as /devices/virtual/input/input9
- <6>[ 1.103515] [voice.c:voice_thread] voice_thread() start
- <6>[ 1.104370] VFP support v0.3: implementor 51 architecture 64 part 0f variant 1 rev 0
- <4>[ 1.107208]
- <4>[ 1.107208] ====================================================
- <4>[ 1.107238] ======= [TOUCH SCREEN] INIT =========
- <4>[ 1.107238] ====================================================
- <6>[ 1.107727] mcsdl_vdd_on: wlan2_vreg_touch enable success!
- <6>[ 1.108184] mcsdl_vdd_on: gp13_vreg_touchio enable success!
- <4>[ 1.243713]
- <4>[ 1.243713] ====================================================
- <4>[ 1.243713] ======= [TOUCH SCREEN] PROBE =========
- <4>[ 1.243713] ====================================================
- <6>[ 1.249694] [TOUCH] Melfas H/W version: 0x98.
- <6>[ 1.249694] [TOUCH] Current F/W version: 0x29.
- <6>[ 1.755096] mcsdl_vdd_on: wlan2_vreg_touch enable success!
- <6>[ 1.755554] mcsdl_vdd_on: gp13_vreg_touchio enable success!
- <4>[ 1.782287] s6d05a1 start s6d05a1_esd, panel_initialized: 0,disp_initialized: 1
- <4>[ 1.782714] melfas_ts_probe: max_x: 320, max_y: 480
- <6>[ 1.782928] input: melfas_ts_input as /devices/virtual/input/input10
- <6>[ 1.785339] melfas_ts_probe: Start touchscreen melfas_ts_input
- <7>[ 1.791137] msmrtc_tod_proc_result: 04/21/2012 05:00:32 (05)
- <6>[ 1.791168] rs30000048 rs30000048.262144: setting system clock to 2012-04-21 05:00:32 UTC (1334984432)
- <6>[ 1.791198] msm_v4l2: msm_v4l2_init
- <4>[ 1.791625] Warning: unable to open an initial console.
- <6>[ 1.791687] Freeing init memory: 196K
- <3>[ 1.803558] init: /init.rc: 271: ignored duplicate definition of service 'busybox'
- <3>[ 1.808654] init: /init.rc: 271: ignored duplicate definition of service 'busybox'
- <3>[ 1.808837] init: /init.rc: 322: invalid option 'start'
- <3>[ 1.808990] init: /init.rc: 353: ignored duplicate definition of service 'bluetoothd'
- <3>[ 1.954071] init: could not open /dev/keychord
- <3>[ 1.954223] init: cannot open '/SPH-M930BST.rle'
- <4>[ 1.978393] ######## bthid_init: ########
- <4>[ 1.978759] ######## bthid_init: done ########
- <4>[ 2.038513] fsa9480_reset_device gpio_147 value = 1 fsa_int_low : 0
- <6>[ 2.107696] mmc0: new high speed MMC card at address 0001
- <6>[ 2.107879] sdio_al mmc0:0001: Probing..
- <6>[ 2.107879] sdio_al mmc0:0001: Not an SDIO card
- <6>[ 2.108062] mmcblk0: mmc0:0001 SEM02G 1.82 GiB
- <6>[ 2.108306] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
- <6>[ 2.127563] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>[ 2.257843] EXT4-fs (mmcblk0p17): recovery complete
- <6>[ 2.259155] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 2.273101] EXT4-fs (mmcblk0p12): recovery complete
- <6>[ 2.274353] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>[ 2.297058] EXT4-fs (mmcblk0p16): recovery complete
- <6>[ 2.298339] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>[ 2.324279] EXT4-fs (mmcblk0p25): recovery complete
- <6>[ 2.325653] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
- <3>[ 2.413940] init: cannot find '/sbin/busybox', disabling 'busybox'
- <3>[ 2.413970] init: cannot find '/sbin/sdx.sh', disabling 'sdx'
- <3>[ 2.414245] init: service 'console' requires console
- <3>[ 2.414825] init: cannot find '/system/bin/macloader', disabling 'macloader'
- <3>[ 2.418975] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <6>[ 2.419586] warning: `adbd' uses 32-bit capabilities (legacy support in use)
- <3>[ 2.423248] init: cannot execve('/system/vendor/bin/gpsd'): Permission denied
- <4>[ 2.446166] mmc2: host does not support reading read-only switch. assuming write-enable.
- <6>[ 2.446197] mmc2: new high speed SDHC card at address 0001
- <6>[ 2.446380] sdio_al mmc2:0001: Probing..
- <6>[ 2.446411] sdio_al mmc2:0001: Not an SDIO card
- <6>[ 2.448822] mmcblk1: mmc2:0001 00000 29.2 GiB
- <6>[ 2.449127] mmcblk1: p1
- <6>[ 2.538848] rmt_storage_ioctl: wait for request ioctl
- <6>[ 2.601501] SMD: ch 0 0 -> 1
- <6>[ 2.601593] SMD: ch 0 1 -> 2
- <4>[ 2.666961] rild used greatest stack depth: 5828 bytes left
- <4>[ 2.904632] !===== usb function lists =====!
- <4>[ 2.904632] [config_buf] 0
- <4>[ 2.904663] [config_buf] dffc9660
- <4>[ 2.904663] [config_buf] dffc9660
- <4>[ 2.904663] [config_buf] acm
- <4>[ 2.904663] -------------------------
- <4>[ 2.904663] [config_buf] 1
- <4>[ 2.904693] [config_buf] dffc9660
- <4>[ 2.904693] [config_buf] dffc9660
- <4>[ 2.904693] [config_buf] acm
- <4>[ 2.904693] -------------------------
- <4>[ 2.904724] [config_buf] 2
- <4>[ 2.904724] [config_buf] df45d9f0
- <4>[ 2.904724] [config_buf] df45d9f0
- <4>[ 2.904724] [config_buf] diag
- <4>[ 2.904754] -------------------------
- <4>[ 2.904754] [config_buf] 3
- <4>[ 2.904754] [config_buf] df45d620
- <4>[ 2.904754] [config_buf] df45d620
- <4>[ 2.904785] [config_buf] usb_mass_storage
- <4>[ 2.904785] -------------------------
- <4>[ 2.904785] [config_buf] 4
- <4>[ 2.904785] [config_buf] df45d3e0
- <4>[ 2.904815] [config_buf] df45d3e0
- <4>[ 2.904815] [config_buf] adb
- <4>[ 2.904815] -------------------------
- <4>[ 2.904815] !==============================!
- <4>[ 2.958251] !===== usb function lists =====!
- <4>[ 2.958282] [config_buf] 0
- <4>[ 2.958282] [config_buf] dffc9660
- <4>[ 2.958282] [config_buf] dffc9660
- <4>[ 2.958312] [config_buf] acm
- <4>[ 2.958312] -------------------------
- <4>[ 2.958312] [config_buf] 1
- <4>[ 2.958312] [config_buf] dffc9660
- <4>[ 2.958343] [config_buf] dffc9660
- <4>[ 2.958343] [config_buf] acm
- <4>[ 2.958343] -------------------------
- <4>[ 2.958343] [config_buf] 2
- <4>[ 2.958374] [config_buf] df45d9f0
- <4>[ 2.958374] [config_buf] df45d9f0
- <4>[ 2.958374] [config_buf] diag
- <4>[ 2.958374] -------------------------
- <4>[ 2.958374] [config_buf] 3
- <4>[ 2.958404] [config_buf] df45d620
- <4>[ 2.958404] [config_buf] df45d620
- <4>[ 2.958404] [config_buf] usb_mass_storage
- <4>[ 2.958404] -------------------------
- <4>[ 2.958435] [config_buf] 4
- <4>[ 2.958435] [config_buf] df45d3e0
- <4>[ 2.958435] [config_buf] df45d3e0
- <4>[ 2.958435] [config_buf] adb
- <4>[ 2.958465] -------------------------
- <4>[ 2.958465] !==============================!
- <4>[ 2.958892] !===== usb function lists =====!
- <4>[ 2.958892] [config_buf] 0
- <4>[ 2.958892] [config_buf] dffc9660
- <4>[ 2.958923] [config_buf] dffc9660
- <4>[ 2.958923] [config_buf] acm
- <4>[ 2.958923] -------------------------
- <4>[ 2.958923] [config_buf] 1
- <4>[ 2.958923] [config_buf] dffc9660
- <4>[ 2.958953] [config_buf] dffc9660
- <4>[ 2.958953] [config_buf] acm
- <4>[ 2.958953] -------------------------
- <4>[ 2.958953] [config_buf] 2
- <4>[ 2.958984] [config_buf] df45d9f0
- <4>[ 2.958984] [config_buf] df45d9f0
- <4>[ 2.958984] [config_buf] diag
- <4>[ 2.958984] -------------------------
- <4>[ 2.959014] [config_buf] 3
- <4>[ 2.959014] [config_buf] df45d620
- <4>[ 2.959014] [config_buf] df45d620
- <4>[ 2.959014] [config_buf] usb_mass_storage
- <4>[ 2.959045] -------------------------
- <4>[ 2.959045] [config_buf] 4
- <4>[ 2.959045] [config_buf] df45d3e0
- <4>[ 2.959045] [config_buf] df45d3e0
- <4>[ 2.959075] [config_buf] adb
- <4>[ 2.959075] -------------------------
- <4>[ 2.959075] !==============================!
- <6>[ 2.960296] android_usb gadget: high speed config #1: android
- <4>[ 2.960327] acm_disconnected
- <7>[ 2.960388] diag: USB connected
- <3>[ 2.961608] msm_hsusb_send_serial_number: rpc call failed! error: -22
- <6>[ 3.008483]
- <6>[ 3.008483] Charger Type: STD DOWNSTREAM PORT
- <4>[ 3.106231] hcitool used greatest stack depth: 5528 bytes left
- <6>[ 6.030151] [BATT] msm_batt_update_psy_status: chg_current = 495, Temperature = 293, V_F = 623, (from CP)
- <6>[ 6.032470] [BATT] msm_batt_update_psy_status: Voltage = 3903, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
- <4>[ 6.535461] kr3dh_power_up data[207]
- <4>[ 6.536651] light_enable_store(276): <6>timer started.
- <4>[ 6.537048] proximity_onoff(934): <6>The proximity sensor is ON
- <6>[ 6.537048] gp2a_power_en: 1
- <4>[ 6.550933] light_enable_store(272): <6>timer canceled.
- <4>[ 6.551055] proximity_onoff(934): <6>The proximity sensor is OFF
- <6>[ 6.551300] gp2a_power_en: 0
- <3>[ 6.569152] proximity_enable_store: proxmity disabled!
- <6>[ 7.218688] [BATT] msm_batt_update_psy_status: chg_current = 495, Temperature = 293, V_F = 623, (from CP)
- <6>[ 7.220947] [BATT] msm_batt_update_psy_status: Voltage = 3905, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
- <3>[ 7.549835] init: cannot execve('/system/vendor/bin/gpsd'): Permission denied
- <4>[ 8.798461] [VIB] OFF
- <4>[ 8.798492] [VIB] set_pmic_vibrator, input : OFF
- <4>[ 9.396179] [VIB] OFF
- <4>[ 9.396179] [VIB] set_pmic_vibrator, input : OFF
- <6>[ 9.417938] request_suspend_state: wakeup (3->0) at 9419304238 (2012-04-21 05:00:40.114073340 UTC)
- <4>[ 9.419616] [VIB] ON, 1 ms
- <4>[ 9.419616] [VIB] set_pmic_vibrator, input : ON
- <4>[ 9.420623] [VIB] vibrator_timer_func
- <4>[ 9.420623] [VIB] hrtimer active, remain:0
- <4>[ 9.420654] [VIB] set_pmic_vibrator, input : OFF
- <4>[ 9.441040] [VIB] ON, 21 ms
- <4>[ 9.441070] [VIB] set_pmic_vibrator, input : ON
- <4>[ 9.462066] [VIB] vibrator_timer_func
- <4>[ 9.462097] [VIB] hrtimer active, remain:0
- <4>[ 9.462097] [VIB] set_pmic_vibrator, input : OFF
- <4>[ 10.662902] kr3dh_power_up data[207]
- <4>[ 10.664031] kr3dh_set_delay actual_delay(delay)[200] kr3dh->odr[168]
- <4>[ 10.664581] kr3dh_set_delay actual_delay(delay)[200] kr3dh->odr[168]
- <6>[ 12.220367] [BATT] msm_batt_update_psy_status: chg_current = 495, Temperature = 294, V_F = 624, (from CP)
- <6>[ 12.222625] [BATT] msm_batt_update_psy_status: Voltage = 3903, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
- <3>[ 12.700805] init: cannot execve('/system/vendor/bin/gpsd'): Permission denied
- <4>[ 14.515045] Thread-11 used greatest stack depth: 5328 bytes left
- <6>[ 17.230010] [BATT] msm_batt_update_psy_status: chg_current = 496, Temperature = 294, V_F = 623, (from CP)
- <6>[ 17.232360] [BATT] msm_batt_update_psy_status: Voltage = 3905, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
- <3>[ 17.689483] init: cannot execve('/system/vendor/bin/gpsd'): Permission denied
- <3>[ 22.071594] init: cannot execve('/system/vendor/bin/gpsd'): Permission denied
- <6>[ 22.240112] [BATT] msm_batt_update_psy_status: chg_current = 495, Temperature = 295, V_F = 625, (from CP)
- <6>[ 22.242340] [BATT] msm_batt_update_psy_status: Voltage = 3915, Soc = 56, temperature = 293, current = 300, Source = 2, Health = 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement