API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 19th, 2017
120
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 150.00 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. rtc[1] value = 0x00010000
  4. rtc[2] value = 0x00020000
  5. rtc[3] value = 0x00030000
  6. DRAM DRIVE INFO: V1.0
  7. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  8. DRAM normal_mode value: 00000001
  9. DRAM CLK =672 MHZ
  10. PMU: AXP81X
  11. ddr voltage = 1200 mv
  12. using ic A83T
  13. using axp AXP813
  14. DRAM zq value: 00003bfb
  15. dram size =2048
  16. card boot number = 0
  17. card no is 0
  18. sdcard 0 line count 0
  19. [mmc]: mmc driver ver 2014-8-11 15:06:39
  20. [mmc]: ***Try SD card 0***
  21. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  22. [mmc]: vendor: Man 00035344 Snr 83562d79
  23. [mmc]: product: SL16G
  24. [mmc]: revision: 8.0
  25. [mmc]: ***SD/MMC 0 init OK!!!***
  26. sdcard 0 init ok
  27. ERROR! NOT find the head of uboot.
  28. The size of uboot is 000d8000.
  29. sum=ce3ec68c
  30. src_sum=ce3ec68c
  31. Succeed in loading uboot from sdmmc flash.
  32. Ready to disable icache.
  33. Jump to secend Boot.
  34. normal mode
  35.  
  36. [ 0.313]
  37.  
  38. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  39.  
  40. [ 0.322]version: 2.1.0
  41. normal mode
  42. [ 0.402]pmbus: normal or secure os
  43. ready
  44. [ 0.406]PMU: AXP81X
  45. [ 0.408]PMU: AXP81X found
  46. bat_vol=176, ratio=100
  47. [ 0.414]PMU: dcdc2 900
  48. [ 0.416]PMU: pll1 1008 Mhz
  49. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  50. set power on vol to default
  51. dcdc1_vol = 3300, onoff=1
  52. dcdc2_vol = 900, onoff=1
  53. dcdc3_vol = 900, onoff=1
  54. dcdc4_vol = 900, onoff=1
  55. dcdc6_vol = 900, onoff=1
  56. aldo1_vol = 1800, onoff=0
  57. aldo2_vol = 1800, onoff=1
  58. aldo3_vol = 3000, onoff=1
  59. eldo2_vol = 1800, onoff=0
  60. dldo1_vol = 3300, onoff=0
  61. dldo2_vol = 3300, onoff=0
  62. dldo3_vol = 2500, onoff=1
  63. dldo4_vol = 2800, onoff=0
  64. fldo2_vol = 900, onoff=1
  65. gpio0_vol = 3300, onoff=1
  66. gpio1_vol = 3300, onoff=1
  67. find power_sply to end
  68. supply=dcdc1
  69. axp=axp81x, supply=dcdc1, vol=3300
  70. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  71. supply=dcdc1
  72. axp=axp81x, supply=dcdc1, vol=3300
  73. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  74. supply=dldo3
  75. axp=axp81x, supply=dldo3, vol=1800
  76. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  77. supply=dcdc1
  78. axp=axp81x, supply=dcdc1, vol=3300
  79. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  80. supply=dcdc1
  81. axp=axp81x, supply=dcdc1, vol=3300
  82. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  83. supply=dcdc1
  84. axp=axp81x, supply=dcdc1, vol=3300
  85. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  86. supply=dcdc1
  87. axp=axp81x, supply=dcdc1, vol=3300
  88. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  89. supply=aldo3
  90. axp=axp81x, supply=aldo3, vol=3000
  91. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  92. config gpio bias voltage finish
  93. vbus exist
  94. no battery, limit to dc
  95. ac100 reg 0x00 = 0x101
  96. ac100 reg 0xd0 = 0x0
  97. ac100 reg 0xd1 = 0x0
  98. __446__:(board.c:power_source_init)
  99. [AXP81X]:[00]=[35]
  100. [AXP81X]:[01]=[10]
  101. [AXP81X]:[02]=[02]
  102. [AXP81X]:[03]=[51]
  103. [AXP81X]:[04]=[00]
  104. [AXP81X]:[05]=[00]
  105. [AXP81X]:[06]=[00]
  106. [AXP81X]:[07]=[00]
  107. [AXP81X]:[08]=[00]
  108. [AXP81X]:[09]=[00]
  109. [AXP81X]:[0A]=[00]
  110. [AXP81X]:[0B]=[00]
  111. [AXP81X]:[0C]=[00]
  112. [AXP81X]:[0D]=[00]
  113. [AXP81X]:[0E]=[00]
  114. [AXP81X]:[0F]=[00]
  115. [AXP81X]:[10]=[3F]
  116. [AXP81X]:[11]=[00]
  117. [AXP81X]:[12]=[20]
  118. [AXP81X]:[13]=[C8]
  119. [AXP81X]:[14]=[08]
  120. [AXP81X]:[15]=[1A]
  121. [AXP81X]:[16]=[1A]
  122. [AXP81X]:[17]=[0B]
  123. [AXP81X]:[18]=[15]
  124. [AXP81X]:[19]=[00]
  125. [AXP81X]:[1A]=[16]
  126. [AXP81X]:[1B]=[00]
  127. [AXP81X]:[1C]=[0B]
  128. [AXP81X]:[1D]=[04]
  129. [AXP81X]:[1E]=[00]
  130. [AXP81X]:[1F]=[00]
  131. [AXP81X]:[20]=[11]
  132. [AXP81X]:[21]=[A8]
  133. [AXP81X]:[22]=[A8]
  134. [AXP81X]:[23]=[A8]
  135. [AXP81X]:[24]=[A4]
  136. [AXP81X]:[25]=[9E]
  137. [AXP81X]:[26]=[A8]
  138. [AXP81X]:[27]=[FC]
  139. [AXP81X]:[28]=[0B]
  140. [AXP81X]:[29]=[0B]
  141. [AXP81X]:[2A]=[17]
  142. [AXP81X]:[2B]=[00]
  143. [AXP81X]:[2C]=[00]
  144. [AXP81X]:[2D]=[B0]
  145. [AXP81X]:[2E]=[40]
  146. [AXP81X]:[2F]=[00]
  147. [AXP81X]:[30]=[03]
  148. [AXP81X]:[31]=[03]
  149. [AXP81X]:[32]=[43]
  150. [AXP81X]:[33]=[C8]
  151. [AXP81X]:[34]=[45]
  152. [AXP81X]:[35]=[68]
  153. [AXP81X]:[36]=[59]
  154. [AXP81X]:[37]=[00]
  155. [AXP81X]:[38]=[A5]
  156. [AXP81X]:[39]=[1F]
  157. [AXP81X]:[3A]=[80]
  158. [AXP81X]:[3B]=[08]
  159. [AXP81X]:[3C]=[FC]
  160. [AXP81X]:[3D]=[16]
  161. [AXP81X]:[3E]=[7C]
  162. BPI-M3:[AXP81X]:[3A]=[80]
  163. BPI-M3: [AXP81X]: set [3A]=[85]
  164. BPI-M3:[AXP81X]: read [3A]=[85]
  165. BPI-M3: [AXP81X]: set [35]=[83]
  166. BPI-M3:[AXP81X]: read [35]=[83]
  167. BPI-M3:[AXP81X]: do_reset
  168. resetting ...
  169. set next mode 14
  170. drv_disp_exit
  171. [ 1.811][mmc]: MMC Device 2 not found
  172. [ 1.815][mmc]: mmc not find,so not exit
  173.  
  174. HELLO! BOOT0 is starting!
  175. boot0 version : 4.0.0
  176. rtc[1] value = 0x00010000
  177. rtc[2] value = 0x00020000
  178. rtc[3] value = 0x00030000
  179. DRAM DRIVE INFO: V1.0
  180. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  181. DRAM normal_mode value: 00000001
  182. DRAM CLK =672 MHZ
  183. PMU: AXP81X
  184. ddr voltage = 1200 mv
  185. using ic A83T
  186. using axp AXP813
  187. DRAM zq value: 00003bfb
  188. dram size =2048
  189. card boot number = 0
  190. card no is 0
  191. sdcard 0 line count 0
  192. [mmc]: mmc driver ver 2014-8-11 15:06:39
  193. [mmc]: ***Try SD card 0***
  194. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  195. [mmc]: vendor: Man 00035344 Snr 83562d79
  196. [mmc]: product: SL16G
  197. [mmc]: revision: 8.0
  198. [mmc]: ***SD/MMC 0 init OK!!!***
  199. sdcard 0 init ok
  200. ERROR! NOT find the head of uboot.
  201. The size of uboot is 000d8000.
  202. sum=ce3ec68c
  203. src_sum=ce3ec68c
  204. Succeed in loading uboot from sdmmc flash.
  205. Ready to disable icache.
  206. Jump to secend Boot.
  207. normal mode
  208.  
  209. [ 0.314]
  210.  
  211. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  212.  
  213. [ 0.323]version: 2.1.0
  214. normal mode
  215. [ 0.403]pmbus: normal or secure os
  216. ready
  217. [ 0.407]PMU: AXP81X
  218. [ 0.409]PMU: AXP81X found
  219. bat_vol=0, ratio=100
  220. [ 0.414]PMU: dcdc2 900
  221. [ 0.417]PMU: pll1 1008 Mhz
  222. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  223. set power on vol to default
  224. dcdc1_vol = 3300, onoff=1
  225. dcdc2_vol = 900, onoff=1
  226. dcdc3_vol = 900, onoff=1
  227. dcdc4_vol = 900, onoff=1
  228. dcdc6_vol = 900, onoff=1
  229. aldo1_vol = 1800, onoff=0
  230. aldo2_vol = 1800, onoff=1
  231. aldo3_vol = 3000, onoff=1
  232. eldo2_vol = 1800, onoff=0
  233. dldo1_vol = 3300, onoff=0
  234. dldo2_vol = 3300, onoff=0
  235. dldo3_vol = 2500, onoff=1
  236. dldo4_vol = 2800, onoff=0
  237. fldo2_vol = 900, onoff=1
  238. gpio0_vol = 3300, onoff=1
  239. gpio1_vol = 3300, onoff=1
  240. find power_sply to end
  241. supply=dcdc1
  242. axp=axp81x, supply=dcdc1, vol=3300
  243. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  244. supply=dcdc1
  245. axp=axp81x, supply=dcdc1, vol=3300
  246. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  247. supply=dldo3
  248. axp=axp81x, supply=dldo3, vol=1800
  249. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  250. supply=dcdc1
  251. axp=axp81x, supply=dcdc1, vol=3300
  252. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  253. supply=dcdc1
  254. axp=axp81x, supply=dcdc1, vol=3300
  255. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  256. supply=dcdc1
  257. axp=axp81x, supply=dcdc1, vol=3300
  258. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  259. supply=dcdc1
  260. axp=axp81x, supply=dcdc1, vol=3300
  261. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  262. supply=aldo3
  263. axp=axp81x, supply=aldo3, vol=3000
  264. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  265. config gpio bias voltage finish
  266. vbus exist
  267. no battery, limit to dc
  268. ac100 reg 0x00 = 0x101
  269. ac100 reg 0xd0 = 0x0
  270. ac100 reg 0xd1 = 0x0
  271. __446__:(board.c:power_source_init)
  272. [AXP81X]:[00]=[35]
  273. [AXP81X]:[01]=[10]
  274. [AXP81X]:[02]=[02]
  275. [AXP81X]:[03]=[51]
  276. [AXP81X]:[04]=[00]
  277. [AXP81X]:[05]=[00]
  278. [AXP81X]:[06]=[00]
  279. [AXP81X]:[07]=[00]
  280. [AXP81X]:[08]=[00]
  281. [AXP81X]:[09]=[00]
  282. [AXP81X]:[0A]=[00]
  283. [AXP81X]:[0B]=[00]
  284. [AXP81X]:[0C]=[00]
  285. [AXP81X]:[0D]=[00]
  286. [AXP81X]:[0E]=[00]
  287. [AXP81X]:[0F]=[0E]
  288. [AXP81X]:[10]=[3F]
  289. [AXP81X]:[11]=[00]
  290. [AXP81X]:[12]=[20]
  291. [AXP81X]:[13]=[C8]
  292. [AXP81X]:[14]=[08]
  293. [AXP81X]:[15]=[1A]
  294. [AXP81X]:[16]=[1A]
  295. [AXP81X]:[17]=[0B]
  296. [AXP81X]:[18]=[15]
  297. [AXP81X]:[19]=[00]
  298. [AXP81X]:[1A]=[16]
  299. [AXP81X]:[1B]=[00]
  300. [AXP81X]:[1C]=[0B]
  301. [AXP81X]:[1D]=[04]
  302. [AXP81X]:[1E]=[00]
  303. [AXP81X]:[1F]=[00]
  304. [AXP81X]:[20]=[11]
  305. [AXP81X]:[21]=[A8]
  306. [AXP81X]:[22]=[A8]
  307. [AXP81X]:[23]=[A8]
  308. [AXP81X]:[24]=[A4]
  309. [AXP81X]:[25]=[9E]
  310. [AXP81X]:[26]=[A8]
  311. [AXP81X]:[27]=[FC]
  312. [AXP81X]:[28]=[0B]
  313. [AXP81X]:[29]=[0B]
  314. [AXP81X]:[2A]=[17]
  315. [AXP81X]:[2B]=[00]
  316. [AXP81X]:[2C]=[00]
  317. [AXP81X]:[2D]=[B0]
  318. [AXP81X]:[2E]=[40]
  319. [AXP81X]:[2F]=[00]
  320. [AXP81X]:[30]=[03]
  321. [AXP81X]:[31]=[03]
  322. [AXP81X]:[32]=[43]
  323. [AXP81X]:[33]=[C8]
  324. [AXP81X]:[34]=[45]
  325. [AXP81X]:[35]=[83]
  326. [AXP81X]:[36]=[59]
  327. [AXP81X]:[37]=[00]
  328. [AXP81X]:[38]=[A5]
  329. [AXP81X]:[39]=[1F]
  330. [AXP81X]:[3A]=[85]
  331. [AXP81X]:[3B]=[08]
  332. [AXP81X]:[3C]=[FC]
  333. [AXP81X]:[3D]=[16]
  334. [AXP81X]:[3E]=[7C]
  335. BPI-M3:[AXP81X]:[3A]=[85]
  336. limit to 2500mA
  337. fel key old mode
  338. run key detect
  339. no key found
  340. no key input
  341. dram_para_set start
  342. dram_para_set end
  343. [ 0.760]DRAM: 2 GiB
  344. relocation Offset is: 75af7000
  345. user_gpio config
  346. user_gpio ok
  347. gic: normal or no secure os mode
  348. script config pll_de to 504 Mhz
  349. script config pll_video1 to 297 Mhz
  350. Not Found clk pll_video in script
  351. enable power vcc-hdmi-18, ret=0
  352. DRV_DISP_Init end
  353. [ 0.998]boot_disp.output_disp=1
  354. [ 1.002]boot_disp.output_type=3
  355. [ 1.005]boot_disp.output_mode=5
  356. [ 1.008]fetch script data boot_disp.auto_hpd fail
  357. disp1 device type(4) enable
  358. attched ok, mgr1<-->device1, type=4, mode=5----
  359. ready to set mode
  360. workmode = 0
  361. MMC: 0
  362. [ 1.043][mmc]: mmc driver ver 2015-04-13 14:50:00
  363. [ 1.048][mmc]: get sdc_phy_wipe fail.
  364. [ 1.052][mmc]: get sdc0 sdc_erase fail.
  365. [ 1.056][mmc]: get sdc_f_max fail,use default 50000000Hz
  366. [ 1.061][mmc]: get sdc_ex_dly_used fail,use default dly
  367. [ 1.067][mmc]: SUNXI SD/MMC: 0
  368. [ 1.080][mmc]: *Try SD card 0*
  369. [ 1.124][mmc]: CID 0x3534453 0x4c313647 0x8083562d 0x790103f3
  370. [ 1.129][mmc]: mmc clk 50000000
  371. [ 1.133][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  372. [ 1.138][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  373. [ 1.143][mmc]: ***SD/MMC 0 init OK!!!***
  374. [ 1.151][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  375. [ 1.157][mmc]: secure_feature 0x0
  376. [ 1.160][mmc]: secure_removal_type 0x0
  377. [ 1.164]sunxi flash init ok
  378. [ 1.172][mmc]: MMC Device 2 not found
  379. [ 1.175][mmc]: Can not find mmc dev
  380. [ 1.179][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  381. sunxi_secstorage_read fail
  382. get secure storage map err
  383. sunxi secure storage is not supported
  384. private partition is not exist
  385. In: serial
  386. Out: serial
  387. Err: serial
  388. --------fastboot partitions--------
  389. -total partitions:6-
  390. -name- -start- -size-
  391. boot-res : 1000000 2000000
  392. env : 3000000 1000000
  393. boot : 4000000 1000000
  394. rootfs : 5000000 20000000
  395. klog : 25000000 1000000
  396. UDISK : 26000000 0
  397. -----------------------------------
  398. base bootcmd=run setargs_nand boot_normal
  399. bootcmd set setargs_mmc
  400. key 0
  401. recovery key high 10, low 8
  402. cant find fstbt value
  403. no misc partition is found
  404. to be run cmd=run setargs_mmc boot_normal
  405. serial is: 00000000000000000000
  406. mount part name boot-res
  407. cant open script.bin, maybe it is not exist
  408. WORK_MODE_BOOT
  409. board_status_probe
  410. [ 1.285]pre sys mode
  411. sunxi_bmp_logo_display
  412. [ 1.410][mmc]: blkcnt should not be 0
  413. [ 1.428]fetch script data boot_disp.output_disp fail
  414. [ 1.433]screen_id =1, screen_width =1280, screen_height =720
  415. [ 1.439]frame buffer address 46400000
  416. [ 1.443]Hit any key to stop autoboot: 3  2  1  0
  417. [ 4.699][mmc]: MMC Device 2 not found
  418.  
  419. ** Invalid boot device **
  420. [ 4.712][mmc]: blkcnt should not be 0
  421. Loaded environment from uEnv.txt
  422. Running uenvcmd ...
  423. Banaan Pi bpi-m3 chip: a83t Service: linux
  424.  
  425. ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
  426. ## Booting kernel from Legacy Image at 48000000 ...
  427. Image Name: Linux-3.4.39-BPI-M3-Kernel
  428. Image Type: ARM Linux Kernel Image (uncompressed)
  429. Data Size: 5717288 Bytes = 5.5 MiB
  430. Load Address: 40008000
  431. Entry Point: 40008000
  432. Verifying Checksum ... OK
  433. Loading Kernel Image ... OK
  434. OK
  435. [ 5.092][mmc]: MMC Device 2 not found
  436. [ 5.096][mmc]: mmc not find,so not exit
  437. [ 5.100]
  438. Starting kernel ...
  439.  
  440. [sun8i_fixup]: From boot, get meminfo:
  441.  
  442. Start: 0x40000000
  443.  
  444. Size: 2048MB
  445.  
  446. ion_carveout reserve: 96m 128m
  447.  
  448. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  449.  
  450. ion_cma reserve: 120m 176m 512m
  451.  
  452. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  453.  
  454. ------sun8i_smp_init_ops----37-----
  455.  
  456. [ 0.000000] Booting Linux on physical CPU 0
  457. [ 0.000000] Initializing cgroup subsys cpuset
  458. [ 0.000000] Initializing cgroup subsys cpu
  459. [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
  460. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  461. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  462. [ 0.000000] Machine: sun8i
  463. [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
  464. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  465. [ 0.000000] On node 0 totalpages: 524288
  466. [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
  467. [ 0.000000] Normal zone: 1404 pages used for memmap
  468. [ 0.000000] Normal zone: 0 pages reserved
  469. [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
  470. [ 0.000000] HighMem zone: 3204 pages used for memmap
  471. [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
  472. [ 0.000000] script_init enter!
  473. [ 0.000000] script_init exit!
  474. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  475. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
  476. [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  477. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  478. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  479. [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
  480. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  481. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  482. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  483. <6>[ 0.000000] allocated 4194304 bytes of page_cgroup
  484. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  485. [ 0.000000] Memory: 2048MB = 2048MB total
  486. [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
  487. [ 0.000000] Virtual kernel memory layout:
  488. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  489. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  490. [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  491. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  492. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  493. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  494. [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
  495. [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
  496. [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
  497. [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
  498. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  499. [ 0.000000] Preemptible hierarchical RCU implementation.
  500. [ 0.000000] NR_IRQS:544
  501. [ 0.000000] Architected local timer running at 24.00MHz.
  502. [ 0.000000] Switching to timer-based delay loop
  503. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  504. [ 0.000000] Console: colour dummy device 80x30
  505. [ 0.000000] console [tty1] enabled
  506. [ 0.001421] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  507. [ 0.001495] pid_max: default: 32768 minimum: 301
  508. [ 0.001829] Mount-cache hash table entries: 512
  509. [ 0.003182] Initializing cgroup subsys cpuacct
  510. [ 0.003227] Initializing cgroup subsys memory
  511. [ 0.003301] Initializing cgroup subsys devices
  512. [ 0.003335] Initializing cgroup subsys freezer
  513. [ 0.003367] Initializing cgroup subsys blkio
  514. [ 0.003420] Initializing cgroup subsys perf_event
  515. [ 0.003520] CPU: Testing write buffer coherency: ok
  516. [ 0.003610] ftrace: allocating 27619 entries in 81 pages
  517. [ 0.040298] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  518. [ 0.040385] Setting up static identity map for 0x4076b5a8 - 0x4076b600
  519. [ 0.010000] CPU1: Booted secondary processor
  520. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  521. [ 0.010000] CPU2: Booted secondary processor
  522. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  523. [ 0.010000] CPU3: Booted secondary processor
  524. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  525. [ 0.260088] CPU4: failed to boot: -22
  526. [ 0.300068] CPU5: failed to boot: -22
  527. [ 0.340069] CPU6: failed to boot: -22
  528. [ 0.380092] CPU7: failed to boot: -22
  529. [ 0.380309] Brought up 4 CPUs
  530. [ 0.380335] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  531. [ 0.380909] devtmpfs: initialized
  532. [ 0.390047] pinctrl core: initialized pinctrl subsystem
  533. [ 0.411150] NET: Registered protocol family 16
  534. [ 0.433815] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  535. [ 0.433927] script_sysfs_init success
  536. [ 0.433982] sunxi_dump_init success
  537. [ 0.435148] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  538. [ 0.436972] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  539. [ 0.437432] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  540. [ 0.438672] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  541. [ 0.438716] hw-breakpoint: maximum watchpoint size is 8 bytes.
  542. [ 0.439586] [sunxi-module]: [sunxi-module.0] probe success
  543. [ 0.440311] script config pll_video1 to 297 Mhz
  544. [ 0.440346] script config pll_ve to 432 Mhz
  545. [ 0.440371] Not Found clk pll_periph in script
  546. [ 0.440399] script config pll_gpu to 432 Mhz
  547. [ 0.440427] script config pll_hsic to 480 Mhz
  548. [ 0.440456] script config pll_de to 504 Mhz
  549. [ 0.440478] sunxi_default_clk_init
  550. [ 0.440498] try to set pll6ahb1 to 200000000
  551. [ 0.440560] try to set ahb clk source to pll6ahb1
  552. [ 0.440585] set ahb clk source to pll6ahb1
  553. [ 0.440609] try to set ahb1 to 200000000
  554. [ 0.440634] try to set apb1 to 100000000
  555. [ 0.441593] ===fe3o4==== sunxi_root_procfs_attach ret:0
  556. [ 0.451269] bio: create slab <bio-0> at 0
  557. [ 0.451269] [ARISC] :sunxi-arisc driver v1.70
  558. [ 0.463464] [ARISC] :arisc version: [v0.1.25.3]
  559. [ 0.463520] [sunxi-module]: arisc register success
  560. [ 0.463953] sunxi_get_soc_bin: slow chip
  561. [ 0.464399] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  562. [ 0.010000] CPU4: Booted secondary processor
  563. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  564. [ 0.010000] CPU5: Booted secondary processor
  565. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  566. [ 0.010000] CPU6: Booted secondary processor
  567. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  568. [ 0.010000] CPU7: Booted secondary processor
  569. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  570. [ 0.491432] SCSI subsystem initialized
  571. [ 0.491432] libata version 3.00 loaded.
  572. [ 0.491432] usbcore: registered new interface driver usbfs
  573. [ 0.491432] usbcore: registered new interface driver hub
  574. [ 0.491432] usbcore: registered new device driver usb
  575. [ 0.491432] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  576. [ 0.491432] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  577. [ 0.491432] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  578. [ 0.491733] Linux video capture interface: v2.00
  579. [ 0.500609] BPI-M3: tmp [00]
  580. [ 0.500609] BPI-M3: set PMIC AC 4000mA
  581. [ 0.500609] BPI-M3: set PMIC AC 4000mA
  582. [ 0.510408] Advanced Linux Sound Architecture Driver Version 1.0.25.
  583. [ 0.511081] Bluetooth: Core ver 2.16
  584. [ 0.511149] NET: Registered protocol family 31
  585. [ 0.511174] Bluetooth: HCI device and connection manager initialized
  586. [ 0.511207] Bluetooth: HCI socket layer initialized
  587. [ 0.511234] Bluetooth: L2CAP socket layer initialized
  588. [ 0.511280] Bluetooth: SCO socket layer initialized
  589. [ 0.511567] cfg80211: Calling CRDA to update world regulatory domain
  590. [ 0.511660] Switching to clocksource arch_sys_counter
  591. [ 0.537851] FS-Cache: Loaded
  592. [ 0.538205] CacheFiles: Loaded
  593. [ 0.549914] axp81x_dcdc1: Failed to create debugfs directory
  594. [ 0.551156] NET: Registered protocol family 2
  595. [ 0.551542] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  596. [ 0.552337] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  597. [ 0.554833] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  598. [ 0.556416] TCP: Hash tables configured (established 131072 bind 65536)
  599. [ 0.556447] TCP: reno registered
  600. [ 0.556473] UDP hash table entries: 512 (order: 2, 16384 bytes)
  601. [ 0.556541] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  602. [ 0.556974] NET: Registered protocol family 1
  603. [ 0.557436] RPC: Registered named UNIX socket transport module.
  604. [ 0.557469] RPC: Registered udp transport module.
  605. [ 0.557493] RPC: Registered tcp transport module.
  606. [ 0.557516] RPC: Registered tcp NFSv4.1 backchannel transport module.
  607. [ 0.558394] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  608. [ 0.558585] [pm]aw_pm_init!
  609. [ 0.558610] standby_mode = 1.
  610. [ 0.558631] wakeup src cnt is : 2.
  611. [ 0.558658] pmu name: pmu1_para .
  612. [ 0.558684] pmu1_enable = 0x1.
  613. [ 0.558705] pmux_id = 0x7.
  614. [ 0.558727] pmu name: pmu2_para .
  615. [ 0.558749] config_pmux_para: script_parser_fetch err.
  616. [ 0.558774] pmu2_enable = 0x0.
  617. [ 0.559193] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  618. [ 0.559379] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  619. [ 0.559419] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  620. [ 0.559511] after inited: sys_mask config = 0xebd5.
  621. [ 0.559539] dynamic_standby enalbe = 0x0.
  622. [ 0.559595] sunxi_reg_init enter
  623. [ 0.559913] lock super standby for a83!
  624. [ 0.559945] lookup_scene_lock_name: new scene lock super_standby
  625. [ 0.559974] scene_lock_init name=super_standby
  626. [ 0.560000] scene_lock: super_standby, type 5, count 1
  627. [ 0.561980] highmem bounce pool size: 64 pages
  628. [ 0.569887] VFS: Disk quotas dquot_6.5.2
  629. [ 0.570311] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  630. [ 0.572496] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  631. [ 0.573067] NFS: Registering the id_resolver key type
  632. [ 0.573827] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  633. [ 0.575101] NTFS driver 2.1.30 [Flags: R/W].
  634. [ 0.575531] fuse init (API version 7.18)
  635. [ 0.576692] ceph: loaded (mds proto 32)
  636. [ 0.576739] msgmni has been set to 1175
  637. [ 0.585170] alg: No test for stdrng (krng)
  638. [ 0.668479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  639. [ 0.668537] io scheduler noop registered
  640. [ 0.668560] io scheduler deadline registered
  641. [ 0.668766] io scheduler cfq registered (default)
  642. [ 0.669237] pwm module init!
  643. [ 0.669839] [DISP]disp_module_init
  644. [ 0.704177] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  645. [ 0.719466] Console: switching to colour frame buffer device 160x45
  646. [ 0.735602] [DISP]disp_module_init finish
  647. [ 0.811083] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  648. [ 0.811292] sw_uart_pm()890 - uart0 clk is already enable
  649. [ 0.811458] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  650. [ 1.004108] console [ttyS0] enabled
  651. [ 1.310084] axp81x_dcdc1: Failed to create debugfs directory
  652. [ 2.537694] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  653. [ 2.548658] axp81x_dcdc1: Failed to create debugfs directory
  654. [ 2.559108] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  655. [ 2.570575] [drm] Initialized drm 1.1.0 20060810
  656. [ 2.589204] brd: module loaded
  657. [ 2.600976] loop: module loaded
  658. [ 2.608760] [rf_pm]: select module num is 10
  659. [ 2.617662] [rf_pm]: module power1 name vcc-wifi-io
  660. [ 2.627207] [rf_pm]: failed to fetch module_power1_vol
  661. [ 2.637048] [rf_pm]: module power2 name
  662. [ 2.645516] [rf_pm]: failed to fetch module_power2_vol
  663. [ 2.655380] [rf_pm]: module power3 name
  664. [ 2.663834] [rf_pm]: failed to fetch module_power3_vol
  665. [ 2.673637] [rf_pm]: mod has no power_switch gpio
  666. [ 2.682948] [rf_pm]: mod has no chip_en gpio
  667. [ 2.691723] [rf_pm]: lpo_use_apclk: ac10032k2
  668. [ 2.700664] [rf_pm]: get power regulator failed.
  669. [ 2.709841] [rf_pm]: enable vcc-wifi-io.
  670. [ 2.718693] [rf_pm]: mod info power switch -1
  671. [ 2.727493] [rf_pm]: set ac10032k2 32k out
  672. [ 2.736018] scene_lock_init name=rf_pm
  673. [ 2.744240] [wifi_pm]: wifi gpio init is OK !!
  674. [ 2.753024] [rfkill]: mod has no ls_int gpio
  675. [ 2.761535] [rfkill]: mod has no pcm_ch gpio
  676. [ 2.770329] [rfkill]: rfkill set power 0
  677. [ 2.790105] Loading iSCSI transport class v2.0-870.
  678. [ 2.799633] iscsi: registered transport (tcp)
  679. [ 2.808599] [spi]: Found 1 spi devices in config files
  680. [ 2.818021] boards_num modalias max_spd_hz bus_num cs mode
  681. [ 2.830155] 0 spidev 33000000 0 0 3
  682. [ 2.842729] axp81x_dcdc1: Failed to create debugfs directory
  683. [ 2.853165] spi spi0: master is unqueued, this is deprecated
  684. [ 2.863611] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  685. [ 2.875722] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  686. [ 2.887875] usbcore: registered new interface driver qf9700
  687. [ 2.898027] usbcore: registered new interface driver smsc95xx
  688. [ 2.908250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  689. [ 2.939392] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  690. [ 2.952141] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  691. [ 2.965273] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  692. [ 2.990058] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  693. [ 3.000352] ehci_irq: highspeed device connect
  694. [ 3.009069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  695. [ 3.020365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  696. [ 3.032158] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  697. [ 3.044320] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  698. [ 3.055565] usb usb1: SerialNumber: sunxi-ehci
  699. [ 3.065042] hub 1-0:1.0: USB hub found
  700. [ 3.073088] hub 1-0:1.0: 1 port detected
  701. [ 3.081715] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  702. [ 3.112603] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  703. [ 3.125173] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  704. [ 3.137718] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  705. [ 3.204142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  706. [ 3.215836] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  707. [ 3.228049] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  708. [ 3.240227] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  709. [ 3.251859] usb usb2: SerialNumber: sunxi-ohci
  710. [ 3.261625] hub 2-0:1.0: USB hub found
  711. [ 3.270092] hub 2-0:1.0: 1 port detected
  712. [ 3.279089] Initializing USB Mass Storage driver...
  713. [ 3.288996] usbcore: registered new interface driver usb-storage
  714. [ 3.300030] USB Mass Storage support registered.
  715. [ 3.309600] usbcore: registered new interface driver ums-alauda
  716. [ 3.320734] usbcore: registered new interface driver ums-cypress
  717. [ 3.331942] usbcore: registered new interface driver ums-datafab
  718. [ 3.343038] usbcore: registered new interface driver ums_eneub6250
  719. [ 3.354269] usbcore: registered new interface driver ums-freecom
  720. [ 3.365211] usbcore: registered new interface driver ums-isd200
  721. [ 3.376025] usbcore: registered new interface driver ums-jumpshot
  722. [ 3.386905] usbcore: registered new interface driver ums-karma
  723. [ 3.397426] usbcore: registered new interface driver ums-onetouch
  724. [ 3.400175] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  725. [ 3.419452] usbcore: registered new interface driver ums-realtek
  726. [ 3.430064] usbcore: registered new interface driver ums-sddr09
  727. [ 3.440552] usbcore: registered new interface driver ums-sddr55
  728. [ 3.450925] usbcore: registered new interface driver ums-usbat
  729. [ 3.461151] usbcore: registered new interface driver usbserial
  730. [ 3.471223] usbcore: registered new interface driver usbserial_generic
  731. [ 3.481985] USB Serial support registered for generic
  732. [ 3.560680] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  733. [ 3.571697] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  734. [ 3.583170] usb 1-1: Product: USB 2.0 Hub
  735. [ 3.591823] hub 1-1:1.0: USB hub found
  736. [ 3.599556] hub 1-1:1.0: 4 ports detected
  737. [ 3.608618] usbserial: USB Serial Driver core
  738. [ 3.617139] file system registered
  739. [ 3.626201] android_usb gadget: Mass Storage Function, version: 2009/09/11
  740. [ 3.637339] android_usb gadget: Number of LUNs=3
  741. [ 3.645862] lun0: LUN: removable file: (no medium)
  742. [ 3.654616] lun1: LUN: removable file: (no medium)
  743. [ 3.663279] lun2: LUN: removable file: (no medium)
  744. [ 3.672264] android_usb gadget: android_usb ready
  745. [ 3.681157] axp81x_dcdc1: Failed to create debugfs directory
  746. [ 3.690735] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  747. [ 3.700829] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  748. [ 3.713364] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  749. [ 3.724213] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  750. [ 3.737812] usb usb3: Product: sunxi_hcd host driver
  751. [ 3.748866] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  752. [ 3.762401] usb usb3: SerialNumber: sunxi_hcd_host0
  753. [ 3.774383] hub 3-0:1.0: USB hub found
  754. [ 3.784067] hub 3-0:1.0: 1 port detected
  755. [ 3.795175] mousedev: PS/2 mouse device common for all mice
  756. [ 3.805119] sunxikbd_script_init: key para not found, used default para.
  757. [ 3.816941] sunxi_rtc_init(796): sunxi rtc device register!
  758. [ 3.817053] keyname:ctp_para subname:ctp_power_io ,get error!
  759. [ 3.837263] get sysconfig para erro!
  760. [ 3.837532] rtc_gettime(333): read time 1970-1-1 1:0:12
  761. [ 3.837950] alarm_gettime(470): get alarm time 1970
  762.  
  763. HELLO! BOOT0 is starting!
  764. boot0 version : 4.0.0
  765. rtc[1] value = 0x00010000
  766. rtc[2] value = 0x00020000
  767. rtc[3] value = 0x00030000
  768. DRAM DRIVE INFO: V1.0
  769. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  770. DRAM normal_mode value: 00000001
  771. DRAM CLK =672 MHZ
  772. PMU: AXP81X
  773. ddr voltage = 1200 mv
  774. using ic A83T
  775. using axp AXP813
  776. DRAM zq value: 00003bfb
  777. dram size =2048
  778. card boot number = 0
  779. card no is 0
  780. sdcard 0 line count 0
  781. [mmc]: mmc driver ver 2014-8-11 15:06:39
  782. [mmc]: ***Try SD card 0***
  783. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  784. [mmc]: vendor: Man 00035344 Snr 83562d79
  785. [mmc]: product: SL16G
  786. [mmc]: revision: 8.0
  787. [mmc]: ***SD/MMC 0 init OK!!!***
  788. sdcard 0 init ok
  789. ERROR! NOT find the head of uboot.
  790. The size of uboot is 000d8000.
  791. sum=ce3ec68c
  792. src_sum=ce3ec68c
  793. Succeed in loading uboot from sdmmc flash.
  794. Ready to disable icache.
  795. Jump to secend Boot.
  796. normal mode
  797.  
  798. [ 0.314]
  799.  
  800. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  801.  
  802. [ 0.322]version: 2.1.0
  803. normal mode
  804. [ 0.402]pmbus: normal or secure os
  805. ready
  806. [ 0.407]PMU: AXP81X
  807. [ 0.409]PMU: AXP81X found
  808. bat_vol=169, ratio=100
  809. [ 0.414]PMU: dcdc2 900
  810. [ 0.417]PMU: pll1 1008 Mhz
  811. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  812. set power on vol to default
  813. dcdc1_vol = 3300, onoff=1
  814. dcdc2_vol = 900, onoff=1
  815. dcdc3_vol = 900, onoff=1
  816. dcdc4_vol = 900, onoff=1
  817. dcdc6_vol = 900, onoff=1
  818. aldo1_vol = 1800, onoff=0
  819. aldo2_vol = 1800, onoff=1
  820. aldo3_vol = 3000, onoff=1
  821. eldo2_vol = 1800, onoff=0
  822. dldo1_vol = 3300, onoff=0
  823. dldo2_vol = 3300, onoff=0
  824. dldo3_vol = 2500, onoff=1
  825. dldo4_vol = 2800, onoff=0
  826. fldo2_vol = 900, onoff=1
  827. gpio0_vol = 3300, onoff=1
  828. gpio1_vol = 3300, onoff=1
  829. find power_sply to end
  830. supply=dcdc1
  831. axp=axp81x, supply=dcdc1, vol=3300
  832. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  833. supply=dcdc1
  834. axp=axp81x, supply=dcdc1, vol=3300
  835. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  836. supply=dldo3
  837. axp=axp81x, supply=dldo3, vol=1800
  838. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  839. supply=dcdc1
  840. axp=axp81x, supply=dcdc1, vol=3300
  841. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  842. supply=dcdc1
  843. axp=axp81x, supply=dcdc1, vol=3300
  844. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  845. supply=dcdc1
  846. axp=axp81x, supply=dcdc1, vol=3300
  847. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  848. supply=dcdc1
  849. axp=axp81x, supply=dcdc1, vol=3300
  850. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  851. supply=aldo3
  852. axp=axp81x, supply=aldo3, vol=3000
  853. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  854. config gpio bias voltage finish
  855. vbus exist
  856. no battery, limit to dc
  857. ac100 reg 0x00 = 0x101
  858. ac100 reg 0xd0 = 0x0
  859. ac100 reg 0xd1 = 0x0
  860. __446__:(board.c:power_source_init)
  861. [AXP81X]:[00]=[35]
  862. [AXP81X]:[01]=[10]
  863. [AXP81X]:[02]=[02]
  864. [AXP81X]:[03]=[51]
  865. [AXP81X]:[04]=[00]
  866. [AXP81X]:[05]=[00]
  867. [AXP81X]:[06]=[00]
  868. [AXP81X]:[07]=[00]
  869. [AXP81X]:[08]=[00]
  870. [AXP81X]:[09]=[00]
  871. [AXP81X]:[0A]=[00]
  872. [AXP81X]:[0B]=[00]
  873. [AXP81X]:[0C]=[00]
  874. [AXP81X]:[0D]=[00]
  875. [AXP81X]:[0E]=[00]
  876. [AXP81X]:[0F]=[00]
  877. [AXP81X]:[10]=[3F]
  878. [AXP81X]:[11]=[00]
  879. [AXP81X]:[12]=[20]
  880. [AXP81X]:[13]=[C8]
  881. [AXP81X]:[14]=[08]
  882. [AXP81X]:[15]=[1A]
  883. [AXP81X]:[16]=[1A]
  884. [AXP81X]:[17]=[0B]
  885. [AXP81X]:[18]=[15]
  886. [AXP81X]:[19]=[00]
  887. [AXP81X]:[1A]=[16]
  888. [AXP81X]:[1B]=[00]
  889. [AXP81X]:[1C]=[0B]
  890. [AXP81X]:[1D]=[04]
  891. [AXP81X]:[1E]=[00]
  892. [AXP81X]:[1F]=[00]
  893. [AXP81X]:[20]=[11]
  894. [AXP81X]:[21]=[A8]
  895. [AXP81X]:[22]=[A8]
  896. [AXP81X]:[23]=[A8]
  897. [AXP81X]:[24]=[A4]
  898. [AXP81X]:[25]=[9E]
  899. [AXP81X]:[26]=[A8]
  900. [AXP81X]:[27]=[FC]
  901. [AXP81X]:[28]=[0B]
  902. [AXP81X]:[29]=[0B]
  903. [AXP81X]:[2A]=[17]
  904. [AXP81X]:[2B]=[00]
  905. [AXP81X]:[2C]=[00]
  906. [AXP81X]:[2D]=[B0]
  907. [AXP81X]:[2E]=[40]
  908. [AXP81X]:[2F]=[00]
  909. [AXP81X]:[30]=[03]
  910. [AXP81X]:[31]=[03]
  911. [AXP81X]:[32]=[43]
  912. [AXP81X]:[33]=[C8]
  913. [AXP81X]:[34]=[45]
  914. [AXP81X]:[35]=[68]
  915. [AXP81X]:[36]=[59]
  916. [AXP81X]:[37]=[00]
  917. [AXP81X]:[38]=[A5]
  918. [AXP81X]:[39]=[1F]
  919. [AXP81X]:[3A]=[80]
  920. [AXP81X]:[3B]=[08]
  921. [AXP81X]:[3C]=[FC]
  922. [AXP81X]:[3D]=[16]
  923. [AXP81X]:[3E]=[7C]
  924. BPI-M3:[AXP81X]:[3A]=[80]
  925. BPI-M3: [AXP81X]: set [3A]=[85]
  926. BPI-M3:[AXP81X]: read [3A]=[85]
  927. BPI-M3: [AXP81X]: set [35]=[83]
  928. BPI-M3:[AXP81X]: read [35]=[83]
  929. BPI-M3:[AXP81X]: do_reset
  930. resetting ...
  931. set next mode 14
  932. drv_disp_exit
  933. [ 1.811][mmc]: MMC Device 2 not found
  934. [ 1.815][mmc]: mmc not find,so not exit
  935.  
  936. HELLO! BOOT0 is starting!
  937. boot0 version : 4.0.0
  938. rtc[1] value = 0x00010000
  939. rtc[2] value = 0x00020000
  940. rtc[3] value = 0x00030000
  941. DRAM DRIVE INFO: V1.0
  942. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  943. DRAM normal_mode value: 00000001
  944. DRAM CLK =672 MHZ
  945. PMU: AXP81X
  946. ddr voltage = 1200 mv
  947. using ic A83T
  948. using axp AXP813
  949. DRAM zq value: 00003bfb
  950. dram size =2048
  951. card boot number = 0
  952. card no is 0
  953. sdcard 0 line count 0
  954. [mmc]: mmc driver ver 2014-8-11 15:06:39
  955. [mmc]: ***Try SD card 0***
  956. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  957. [mmc]: vendor: Man 00035344 Snr 83562d79
  958. [mmc]: product: SL16G
  959. [mmc]: revision: 8.0
  960. [mmc]: ***SD/MMC 0 init OK!!!***
  961. sdcard 0 init ok
  962. ERROR! NOT find the head of uboot.
  963. The size of uboot is 000d8000.
  964. sum=ce3ec68c
  965. src_sum=ce3ec68c
  966. Succeed in loading uboot from sdmmc flash.
  967. Ready to disable icache.
  968. Jump to secend Boot.
  969. normal mode
  970.  
  971. [ 0.313]
  972.  
  973. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  974.  
  975. [ 0.322]version: 2.1.0
  976. normal mode
  977. [ 0.402]pmbus: normal or secure os
  978. ready
  979. [ 0.406]PMU: AXP81X
  980. [ 0.409]PMU: AXP81X found
  981. bat_vol=0, ratio=100
  982. [ 0.414]PMU: dcdc2 900
  983. [ 0.416]PMU: pll1 1008 Mhz
  984. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  985. set power on vol to default
  986. dcdc1_vol = 3300, onoff=1
  987. dcdc2_vol = 900, onoff=1
  988. dcdc3_vol = 900, onoff=1
  989. dcdc4_vol = 900, onoff=1
  990. dcdc6_vol = 900, onoff=1
  991. aldo1_vol = 1800, onoff=0
  992. aldo2_vol = 1800, onoff=1
  993. aldo3_vol = 3000, onoff=1
  994. eldo2_vol = 1800, onoff=0
  995. dldo1_vol = 3300, onoff=0
  996. dldo2_vol = 3300, onoff=0
  997. dldo3_vol = 2500, onoff=1
  998. dldo4_vol = 2800, onoff=0
  999. fldo2_vol = 900, onoff=1
  1000. gpio0_vol = 3300, onoff=1
  1001. gpio1_vol = 3300, onoff=1
  1002. find power_sply to end
  1003. supply=dcdc1
  1004. axp=axp81x, supply=dcdc1, vol=3300
  1005. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  1006. supply=dcdc1
  1007. axp=axp81x, supply=dcdc1, vol=3300
  1008. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  1009. supply=dldo3
  1010. axp=axp81x, supply=dldo3, vol=1800
  1011. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  1012. supply=dcdc1
  1013. axp=axp81x, supply=dcdc1, vol=3300
  1014. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  1015. supply=dcdc1
  1016. axp=axp81x, supply=dcdc1, vol=3300
  1017. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  1018. supply=dcdc1
  1019. axp=axp81x, supply=dcdc1, vol=3300
  1020. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  1021. supply=dcdc1
  1022. axp=axp81x, supply=dcdc1, vol=3300
  1023. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  1024. supply=aldo3
  1025. axp=axp81x, supply=aldo3, vol=3000
  1026. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  1027. config gpio bias voltage finish
  1028. vbus exist
  1029. no battery, limit to dc
  1030. ac100 reg 0x00 = 0x101
  1031. ac100 reg 0xd0 = 0x0
  1032. ac100 reg 0xd1 = 0x0
  1033. __446__:(board.c:power_source_init)
  1034. [AXP81X]:[00]=[35]
  1035. [AXP81X]:[01]=[10]
  1036. [AXP81X]:[02]=[02]
  1037. [AXP81X]:[03]=[51]
  1038. [AXP81X]:[04]=[00]
  1039. [AXP81X]:[05]=[00]
  1040. [AXP81X]:[06]=[00]
  1041. [AXP81X]:[07]=[00]
  1042. [AXP81X]:[08]=[00]
  1043. [AXP81X]:[09]=[00]
  1044. [AXP81X]:[0A]=[00]
  1045. [AXP81X]:[0B]=[00]
  1046. [AXP81X]:[0C]=[00]
  1047. [AXP81X]:[0D]=[00]
  1048. [AXP81X]:[0E]=[00]
  1049. [AXP81X]:[0F]=[0E]
  1050. [AXP81X]:[10]=[3F]
  1051. [AXP81X]:[11]=[00]
  1052. [AXP81X]:[12]=[20]
  1053. [AXP81X]:[13]=[C8]
  1054. [AXP81X]:[14]=[08]
  1055. [AXP81X]:[15]=[1A]
  1056. [AXP81X]:[16]=[1A]
  1057. [AXP81X]:[17]=[0B]
  1058. [AXP81X]:[18]=[15]
  1059. [AXP81X]:[19]=[00]
  1060. [AXP81X]:[1A]=[16]
  1061. [AXP81X]:[1B]=[00]
  1062. [AXP81X]:[1C]=[0B]
  1063. [AXP81X]:[1D]=[04]
  1064. [AXP81X]:[1E]=[00]
  1065. [AXP81X]:[1F]=[00]
  1066. [AXP81X]:[20]=[11]
  1067. [AXP81X]:[21]=[A8]
  1068. [AXP81X]:[22]=[A8]
  1069. [AXP81X]:[23]=[A8]
  1070. [AXP81X]:[24]=[A4]
  1071. [AXP81X]:[25]=[9E]
  1072. [AXP81X]:[26]=[A8]
  1073. [AXP81X]:[27]=[FC]
  1074. [AXP81X]:[28]=[0B]
  1075. [AXP81X]:[29]=[0B]
  1076. [AXP81X]:[2A]=[17]
  1077. [AXP81X]:[2B]=[00]
  1078. [AXP81X]:[2C]=[00]
  1079. [AXP81X]:[2D]=[B0]
  1080. [AXP81X]:[2E]=[40]
  1081. [AXP81X]:[2F]=[00]
  1082. [AXP81X]:[30]=[03]
  1083. [AXP81X]:[31]=[03]
  1084. [AXP81X]:[32]=[43]
  1085. [AXP81X]:[33]=[C8]
  1086. [AXP81X]:[34]=[45]
  1087. [AXP81X]:[35]=[83]
  1088. [AXP81X]:[36]=[59]
  1089. [AXP81X]:[37]=[00]
  1090. [AXP81X]:[38]=[A5]
  1091. [AXP81X]:[39]=[1F]
  1092. [AXP81X]:[3A]=[85]
  1093. [AXP81X]:[3B]=[08]
  1094. [AXP81X]:[3C]=[FC]
  1095. [AXP81X]:[3D]=[16]
  1096. [AXP81X]:[3E]=[7C]
  1097. BPI-M3:[AXP81X]:[3A]=[85]
  1098. limit to 2500mA
  1099. fel key old mode
  1100. run key detect
  1101. no key found
  1102. no key input
  1103. dram_para_set start
  1104. dram_para_set end
  1105. [ 0.760]DRAM: 2 GiB
  1106. relocation Offset is: 75af7000
  1107. user_gpio config
  1108. user_gpio ok
  1109. gic: normal or no secure os mode
  1110. script config pll_de to 504 Mhz
  1111. script config pll_video1 to 297 Mhz
  1112. Not Found clk pll_video in script
  1113. enable power vcc-hdmi-18, ret=0
  1114. DRV_DISP_Init end
  1115. [ 0.998]boot_disp.output_disp=1
  1116. [ 1.002]boot_disp.output_type=3
  1117. [ 1.005]boot_disp.output_mode=5
  1118. [ 1.008]fetch script data boot_disp.auto_hpd fail
  1119. disp1 device type(4) enable
  1120. attched ok, mgr1<-->device1, type=4, mode=5----
  1121. ready to set mode
  1122. workmode = 0
  1123. MMC: 0
  1124. [ 1.043][mmc]: mmc driver ver 2015-04-13 14:50:00
  1125. [ 1.048][mmc]: get sdc_phy_wipe fail.
  1126. [ 1.052][mmc]: get sdc0 sdc_erase fail.
  1127. [ 1.056][mmc]: get sdc_f_max fail,use default 50000000Hz
  1128. [ 1.061][mmc]: get sdc_ex_dly_used fail,use default dly
  1129. [ 1.067][mmc]: SUNXI SD/MMC: 0
  1130. [ 1.080][mmc]: *Try SD card 0*
  1131. [ 1.124][mmc]: CID 0x3534453 0x4c313647 0x8083562d 0x790103f3
  1132. [ 1.129][mmc]: mmc clk 50000000
  1133. [ 1.133][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  1134. [ 1.138][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  1135. [ 1.143][mmc]: ***SD/MMC 0 init OK!!!***
  1136. [ 1.152][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  1137. [ 1.157][mmc]: secure_feature 0x0
  1138. [ 1.161][mmc]: secure_removal_type 0x0
  1139. [ 1.165]sunxi flash init ok
  1140. [ 1.173][mmc]: MMC Device 2 not found
  1141. [ 1.177][mmc]: Can not find mmc dev
  1142. [ 1.180][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  1143. sunxi_secstorage_read fail
  1144. get secure storage map err
  1145. sunxi secure storage is not supported
  1146. private partition is not exist
  1147. In: serial
  1148. Out: serial
  1149. Err: serial
  1150. --------fastboot partitions--------
  1151. -total partitions:6-
  1152. -name- -start- -size-
  1153. boot-res : 1000000 2000000
  1154. env : 3000000 1000000
  1155. boot : 4000000 1000000
  1156. rootfs : 5000000 20000000
  1157. klog : 25000000 1000000
  1158. UDISK : 26000000 0
  1159. -----------------------------------
  1160. base bootcmd=run setargs_nand boot_normal
  1161. bootcmd set setargs_mmc
  1162. key 0
  1163. recovery key high 10, low 8
  1164. cant find fstbt value
  1165. no misc partition is found
  1166. to be run cmd=run setargs_mmc boot_normal
  1167. serial is: 00000000000000000000
  1168. mount part name boot-res
  1169. cant open script.bin, maybe it is not exist
  1170. WORK_MODE_BOOT
  1171. board_status_probe
  1172. [ 1.286]pre sys mode
  1173. sunxi_bmp_logo_display
  1174. [ 1.412][mmc]: blkcnt should not be 0
  1175. [ 1.430]fetch script data boot_disp.output_disp fail
  1176. [ 1.435]screen_id =1, screen_width =1280, screen_height =720
  1177. [ 1.441]frame buffer address 46400000
  1178. [ 1.445]Hit any key to stop autoboot: 3  2  1  0
  1179. [ 4.700][mmc]: MMC Device 2 not found
  1180.  
  1181. ** Invalid boot device **
  1182. [ 4.714][mmc]: blkcnt should not be 0
  1183. Loaded environment from uEnv.txt
  1184. Running uenvcmd ...
  1185. Banaan Pi bpi-m3 chip: a83t Service: linux
  1186.  
  1187. ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
  1188. ## Booting kernel from Legacy Image at 48000000 ...
  1189. Image Name: Linux-3.4.39-BPI-M3-Kernel
  1190. Image Type: ARM Linux Kernel Image (uncompressed)
  1191. Data Size: 5717288 Bytes = 5.5 MiB
  1192. Load Address: 40008000
  1193. Entry Point: 40008000
  1194. Verifying Checksum ... OK
  1195. Loading Kernel Image ... OK
  1196. OK
  1197. [ 5.095][mmc]: MMC Device 2 not found
  1198. [ 5.098][mmc]: mmc not find,so not exit
  1199. [ 5.102]
  1200. Starting kernel ...
  1201.  
  1202. [sun8i_fixup]: From boot, get meminfo:
  1203.  
  1204. Start: 0x40000000
  1205.  
  1206. Size: 2048MB
  1207.  
  1208. ion_carveout reserve: 96m 128m
  1209.  
  1210. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  1211.  
  1212. ion_cma reserve: 120m 176m 512m
  1213.  
  1214. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  1215.  
  1216. ------sun8i_smp_init_ops----37-----
  1217.  
  1218. [ 0.000000] Booting Linux on physical CPU 0
  1219. [ 0.000000] Initializing cgroup subsys cpuset
  1220. [ 0.000000] Initializing cgroup subsys cpu
  1221. [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
  1222. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  1223. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1224. [ 0.000000] Machine: sun8i
  1225. [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
  1226. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  1227. [ 0.000000] On node 0 totalpages: 524288
  1228. [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
  1229. [ 0.000000] Normal zone: 1404 pages used for memmap
  1230. [ 0.000000] Normal zone: 0 pages reserved
  1231. [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
  1232. [ 0.000000] HighMem zone: 3204 pages used for memmap
  1233. [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
  1234. [ 0.000000] script_init enter!
  1235. [ 0.000000] script_init exit!
  1236. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  1237. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
  1238. [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  1239. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  1240. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  1241. [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
  1242. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  1243. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1244. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1245. <6>[ 0.000000] allocated 4194304 bytes of page_cgroup
  1246. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  1247. [ 0.000000] Memory: 2048MB = 2048MB total
  1248. [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
  1249. [ 0.000000] Virtual kernel memory layout:
  1250. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1251. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  1252. [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  1253. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  1254. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1255. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  1256. [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
  1257. [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
  1258. [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
  1259. [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
  1260. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  1261. [ 0.000000] Preemptible hierarchical RCU implementation.
  1262. [ 0.000000] NR_IRQS:544
  1263. [ 0.000000] Architected local timer running at 24.00MHz.
  1264. [ 0.000000] Switching to timer-based delay loop
  1265. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  1266. [ 0.000000] Console: colour dummy device 80x30
  1267. [ 0.000000] console [tty1] enabled
  1268. [ 0.001421] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  1269. [ 0.001495] pid_max: default: 32768 minimum: 301
  1270. [ 0.001827] Mount-cache hash table entries: 512
  1271. [ 0.003174] Initializing cgroup subsys cpuacct
  1272. [ 0.003218] Initializing cgroup subsys memory
  1273. [ 0.003292] Initializing cgroup subsys devices
  1274. [ 0.003327] Initializing cgroup subsys freezer
  1275. [ 0.003359] Initializing cgroup subsys blkio
  1276. [ 0.003413] Initializing cgroup subsys perf_event
  1277. [ 0.003506] CPU: Testing write buffer coherency: ok
  1278. [ 0.003596] ftrace: allocating 27619 entries in 81 pages
  1279. [ 0.040299] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  1280. [ 0.040383] Setting up static identity map for 0x4076b5a8 - 0x4076b600
  1281. [ 0.010000] CPU1: Booted secondary processor
  1282. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1283. [ 0.010000] CPU2: Booted secondary processor
  1284. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  1285. [ 0.010000] CPU3: Booted secondary processor
  1286. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  1287. [ 0.260088] CPU4: failed to boot: -22
  1288. [ 0.300067] CPU5: failed to boot: -22
  1289. [ 0.340070] CPU6: failed to boot: -22
  1290. [ 0.380091] CPU7: failed to boot: -22
  1291. [ 0.380308] Brought up 4 CPUs
  1292. [ 0.380333] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  1293. [ 0.380911] devtmpfs: initialized
  1294. [ 0.390051] pinctrl core: initialized pinctrl subsystem
  1295. [ 0.411123] NET: Registered protocol family 16
  1296. [ 0.434043] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  1297. [ 0.434154] script_sysfs_init success
  1298. [ 0.434206] sunxi_dump_init success
  1299. [ 0.435347] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  1300. [ 0.437164] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  1301. [ 0.437626] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  1302. [ 0.438877] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  1303. [ 0.438922] hw-breakpoint: maximum watchpoint size is 8 bytes.
  1304. [ 0.439780] [sunxi-module]: [sunxi-module.0] probe success
  1305. [ 0.440453] script config pll_video1 to 297 Mhz
  1306. [ 0.440489] script config pll_ve to 432 Mhz
  1307. [ 0.440513] Not Found clk pll_periph in script
  1308. [ 0.440542] script config pll_gpu to 432 Mhz
  1309. [ 0.440570] script config pll_hsic to 480 Mhz
  1310. [ 0.440598] script config pll_de to 504 Mhz
  1311. [ 0.440620] sunxi_default_clk_init
  1312. [ 0.440640] try to set pll6ahb1 to 200000000
  1313. [ 0.440703] try to set ahb clk source to pll6ahb1
  1314. [ 0.440728] set ahb clk source to pll6ahb1
  1315. [ 0.440752] try to set ahb1 to 200000000
  1316. [ 0.440778] try to set apb1 to 100000000
  1317. [ 0.441727] ===fe3o4==== sunxi_root_procfs_attach ret:0
  1318. [ 0.451362] bio: create slab <bio-0> at 0
  1319. [ 0.451362] [ARISC] :sunxi-arisc driver v1.70
  1320. [ 0.463463] [ARISC] :arisc version: [v0.1.25.3]
  1321. [ 0.463520] [sunxi-module]: arisc register success
  1322. [ 0.463952] sunxi_get_soc_bin: slow chip
  1323. [ 0.464399] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  1324. [ 0.010000] CPU4: Booted secondary processor
  1325. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  1326. [ 0.010000] CPU5: Booted secondary processor
  1327. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  1328. [ 0.010000] CPU6: Booted secondary processor
  1329. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  1330. [ 0.010000] CPU7: Booted secondary processor
  1331. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  1332. [ 0.491443] SCSI subsystem initialized
  1333. [ 0.491443] libata version 3.00 loaded.
  1334. [ 0.491443] usbcore: registered new interface driver usbfs
  1335. [ 0.491443] usbcore: registered new interface driver hub
  1336. [ 0.491443] usbcore: registered new device driver usb
  1337. [ 0.491443] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  1338. [ 0.491443] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  1339. [ 0.491443] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  1340. [ 0.491697] Linux video capture interface: v2.00
  1341. [ 0.500697] BPI-M3: tmp [00]
  1342. [ 0.500697] BPI-M3: set PMIC AC 4000mA
  1343. [ 0.500697] BPI-M3: set PMIC AC 4000mA
  1344. [ 0.510401] Advanced Linux Sound Architecture Driver Version 1.0.25.
  1345. [ 0.511064] Bluetooth: Core ver 2.16
  1346. [ 0.511131] NET: Registered protocol family 31
  1347. [ 0.511157] Bluetooth: HCI device and connection manager initialized
  1348. [ 0.511190] Bluetooth: HCI socket layer initialized
  1349. [ 0.511216] Bluetooth: L2CAP socket layer initialized
  1350. [ 0.511263] Bluetooth: SCO socket layer initialized
  1351. [ 0.511551] cfg80211: Calling CRDA to update world regulatory domain
  1352. [ 0.511639] Switching to clocksource arch_sys_counter
  1353. [ 0.537812] FS-Cache: Loaded
  1354. [ 0.538162] CacheFiles: Loaded
  1355. [ 0.549901] axp81x_dcdc1: Failed to create debugfs directory
  1356. [ 0.551155] NET: Registered protocol family 2
  1357. [ 0.551546] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  1358. [ 0.552323] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  1359. [ 0.554818] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  1360. [ 0.556398] TCP: Hash tables configured (established 131072 bind 65536)
  1361. [ 0.556429] TCP: reno registered
  1362. [ 0.556456] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1363. [ 0.556523] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1364. [ 0.556975] NET: Registered protocol family 1
  1365. [ 0.557430] RPC: Registered named UNIX socket transport module.
  1366. [ 0.557464] RPC: Registered udp transport module.
  1367. [ 0.557487] RPC: Registered tcp transport module.
  1368. [ 0.557511] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1369. [ 0.558247] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  1370. [ 0.558440] [pm]aw_pm_init!
  1371. [ 0.558466] standby_mode = 1.
  1372. [ 0.558486] wakeup src cnt is : 2.
  1373. [ 0.558513] pmu name: pmu1_para .
  1374. [ 0.558539] pmu1_enable = 0x1.
  1375. [ 0.558560] pmux_id = 0x7.
  1376. [ 0.558582] pmu name: pmu2_para .
  1377. [ 0.558604] config_pmux_para: script_parser_fetch err.
  1378. [ 0.558629] pmu2_enable = 0x0.
  1379. [ 0.559049] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  1380. [ 0.559233] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  1381. [ 0.559273] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  1382. [ 0.559365] after inited: sys_mask config = 0xebd5.
  1383. [ 0.559393] dynamic_standby enalbe = 0x0.
  1384. [ 0.559448] sunxi_reg_init enter
  1385. [ 0.559772] lock super standby for a83!
  1386. [ 0.559807] lookup_scene_lock_name: new scene lock super_standby
  1387. [ 0.559835] scene_lock_init name=super_standby
  1388. [ 0.559862] scene_lock: super_standby, type 5, count 1
  1389. [ 0.561859] highmem bounce pool size: 64 pages
  1390. [ 0.569782] VFS: Disk quotas dquot_6.5.2
  1391. [ 0.570209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1392. [ 0.572392] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1393. [ 0.572960] NFS: Registering the id_resolver key type
  1394. [ 0.573723] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  1395. [ 0.574999] NTFS driver 2.1.30 [Flags: R/W].
  1396. [ 0.575437] fuse init (API version 7.18)
  1397. [ 0.576587] ceph: loaded (mds proto 32)
  1398. [ 0.576635] msgmni has been set to 1175
  1399. [ 0.585011] alg: No test for stdrng (krng)
  1400. [ 0.668337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  1401. [ 0.668400] io scheduler noop registered
  1402. [ 0.668423] io scheduler deadline registered
  1403. [ 0.668631] io scheduler cfq registered (default)
  1404. [ 0.669156] pwm module init!
  1405. [ 0.669767] [DISP]disp_module_init
  1406. [ 0.703901] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  1407. [ 0.719184] Console: switching to colour frame buffer device 160x45
  1408. [ 0.735338] [DISP]disp_module_init finish
  1409. [ 0.810774] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  1410. [ 0.810983] sw_uart_pm()890 - uart0 clk is already enable
  1411. [ 0.811150] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  1412. [ 1.003758] console [ttyS0] enabled
  1413. [ 1.145785] axp81x_dcdc1: Failed to create debugfs directory
  1414. [ 1.310079] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  1415. [ 1.626074] axp81x_dcdc1: Failed to create debugfs directory
  1416. [ 1.944671] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  1417. [ 2.260302] [drm] Initialized drm 1.1.0 20060810
  1418. [ 2.431391] brd: module loaded
  1419. [ 2.600752] loop: module loaded
  1420. [ 2.608541] [rf_pm]: select module num is 10
  1421. [ 2.617469] [rf_pm]: module power1 name vcc-wifi-io
  1422. [ 2.627039] [rf_pm]: failed to fetch module_power1_vol
  1423. [ 2.636894] [rf_pm]: module power2 name
  1424. [ 2.645378] [rf_pm]: failed to fetch module_power2_vol
  1425. [ 2.655259] [rf_pm]: module power3 name
  1426. [ 2.663728] [rf_pm]: failed to fetch module_power3_vol
  1427. [ 2.673545] [rf_pm]: mod has no power_switch gpio
  1428. [ 2.682876] [rf_pm]: mod has no chip_en gpio
  1429. [ 2.691668] [rf_pm]: lpo_use_apclk: ac10032k2
  1430. [ 2.700659] [rf_pm]: get power regulator failed.
  1431. [ 2.709858] [rf_pm]: enable vcc-wifi-io.
  1432. [ 2.718728] [rf_pm]: mod info power switch -1
  1433. [ 2.727539] [rf_pm]: set ac10032k2 32k out
  1434. [ 2.736026] scene_lock_init name=rf_pm
  1435. [ 2.744272] [wifi_pm]: wifi gpio init is OK !!
  1436. [ 2.753068] [rfkill]: mod has no ls_int gpio
  1437. [ 2.761594] [rfkill]: mod has no pcm_ch gpio
  1438. [ 2.770388] [rfkill]: rfkill set power 0
  1439. [ 2.790092] Loading iSCSI transport class v2.0-870.
  1440. [ 2.799636] iscsi: registered transport (tcp)
  1441. [ 2.808603] [spi]: Found 1 spi devices in config files
  1442. [ 2.818037] boards_num modalias max_spd_hz bus_num cs mode
  1443. [ 2.830179] 0 spidev 33000000 0 0 3
  1444. [ 2.842774] axp81x_dcdc1: Failed to create debugfs directory
  1445. [ 2.853226] spi spi0: master is unqueued, this is deprecated
  1446. [ 2.863700] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  1447. [ 2.875817] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  1448. [ 2.887994] usbcore: registered new interface driver qf9700
  1449. [ 2.898157] usbcore: registered new interface driver smsc95xx
  1450. [ 2.908392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1451. [ 2.939551] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1452. [ 2.952305] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  1453. [ 2.965476] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  1454. [ 2.990057] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  1455. [ 3.000359] ehci_irq: highspeed device connect
  1456. [ 3.009084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1457. [ 3.020380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1458. [ 3.032174] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1459. [ 3.044375] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  1460. [ 3.055615] usb usb1: SerialNumber: sunxi-ehci
  1461. [ 3.065063] hub 1-0:1.0: USB hub found
  1462. [ 3.073106] hub 1-0:1.0: 1 port detected
  1463. [ 3.081720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1464. [ 3.112608] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1465. [ 3.125164] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  1466. [ 3.137660] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  1467. [ 3.204131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  1468. [ 3.215825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1469. [ 3.228040] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1470. [ 3.240206] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  1471. [ 3.251838] usb usb2: SerialNumber: sunxi-ohci
  1472. [ 3.261614] hub 2-0:1.0: USB hub found
  1473. [ 3.270083] hub 2-0:1.0: 1 port detected
  1474. [ 3.279074] Initializing USB Mass Storage driver...
  1475. [ 3.288976] usbcore: registered new interface driver usb-storage
  1476. [ 3.300023] USB Mass Storage support registered.
  1477. [ 3.309598] usbcore: registered new interface driver ums-alauda
  1478. [ 3.320722] usbcore: registered new interface driver ums-cypress
  1479. [ 3.331880] usbcore: registered new interface driver ums-datafab
  1480. [ 3.342970] usbcore: registered new interface driver ums_eneub6250
  1481. [ 3.354208] usbcore: registered new interface driver ums-freecom
  1482. [ 3.365151] usbcore: registered new interface driver ums-isd200
  1483. [ 3.375978] usbcore: registered new interface driver ums-jumpshot
  1484. [ 3.386862] usbcore: registered new interface driver ums-karma
  1485. [ 3.397372] usbcore: registered new interface driver ums-onetouch
  1486. [ 3.400171] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  1487. [ 3.419391] usbcore: registered new interface driver ums-realtek
  1488. [ 3.429969] usbcore: registered new interface driver ums-sddr09
  1489. [ 3.440449] usbcore: registered new interface driver ums-sddr55
  1490. [ 3.450824] usbcore: registered new interface driver ums-usbat
  1491. [ 3.461053] usbcore: registered new interface driver usbserial
  1492. [ 3.471112] usbcore: registered new interface driver usbserial_generic
  1493. [ 3.481870] USB Serial support registered for generic
  1494. [ 3.560643] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  1495. [ 3.571653] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  1496. [ 3.583110] usb 1-1: Product: USB 2.0 Hub
  1497. [ 3.591660] hub 1-1:1.0: USB hub found
  1498. [ 3.599392] hub 1-1:1.0: 4 ports detected
  1499. [ 3.608324] usbserial: USB Serial Driver core
  1500. [ 3.616834] file system registered
  1501. [ 3.625872] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1502. [ 3.636994] android_usb gadget: Number of LUNs=3
  1503. [ 3.645504] lun0: LUN: removable file: (no medium)
  1504. [ 3.654236] lun1: LUN: removable file: (no medium)
  1505. [ 3.662886] lun2: LUN: removable file: (no medium)
  1506. [ 3.671853] android_usb gadget: android_usb ready
  1507. [ 3.680727] axp81x_dcdc1: Failed to create debugfs directory
  1508. [ 3.690294] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  1509. [ 3.700372] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  1510. [ 3.712944] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  1511. [ 3.723775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1512. [ 3.737356] usb usb3: Product: sunxi_hcd host driver
  1513. [ 3.748385] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  1514. [ 3.761894] usb usb3: SerialNumber: sunxi_hcd_host0
  1515. [ 3.773843] hub 3-0:1.0: USB hub found
  1516. [ 3.783506] hub 3-0:1.0: 1 port detected
  1517. [ 3.794619] mousedev: PS/2 mouse device common for all mice
  1518. [ 3.804544] sunxikbd_script_init: key para not found, used default para.
  1519. [ 3.816364] sunxi_rtc_init(796): sunxi rtc device register!
  1520. [ 3.816478] keyname:ctp_para subname:ctp_power_io ,get error!
  1521. [ 3.836660] get sysconfig para erro!
  1522. [ 3.836952] rtc_gettime(333): read time 1970-1-1 1:0:12
  1523. [ 
  1524.  
  1525. HELLO! BOOT0 is starting!
  1526. boot0 version : 4.0.0
  1527. rtc[1] value = 0x00010000
  1528. rtc[2] value = 0x00020000
  1529. rtc[3] value = 0x00030000
  1530. DRAM DRIVE INFO: V1.0
  1531. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  1532. DRAM normal_mode value: 00000001
  1533. DRAM CLK =672 MHZ
  1534. PMU: AXP81X
  1535. ddr voltage = 1200 mv
  1536. using ic A83T
  1537. using axp AXP813
  1538. DRAM zq value: 00003bfb
  1539. dram size =2048
  1540. card boot number = 0
  1541. card no is 0
  1542. sdcard 0 line count 0
  1543. [mmc]: mmc driver ver 2014-8-11 15:06:39
  1544. [mmc]: ***Try SD card 0***
  1545. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  1546. [mmc]: vendor: Man 00035344 Snr 83562d79
  1547. [mmc]: product: SL16G
  1548. [mmc]: revision: 8.0
  1549. [mmc]: ***SD/MMC 0 init OK!!!***
  1550. sdcard 0 init ok
  1551. ERROR! NOT find the head of uboot.
  1552. The size of uboot is 000d8000.
  1553. sum=ce3ec68c
  1554. src_sum=ce3ec68c
  1555. Succeed in loading uboot from sdmmc flash.
  1556. Ready to disable icache.
  1557. Jump to secend Boot.
  1558. normal mode
  1559.  
  1560. [ 0.314]
  1561.  
  1562. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  1563.  
  1564. [ 0.322]version: 2.1.0
  1565. normal mode
  1566. [ 0.402]pmbus: normal or secure os
  1567. ready
  1568. [ 0.407]PMU: AXP81X
  1569. [ 0.409]PMU: AXP81X found
  1570. bat_vol=167, ratio=100
  1571. [ 0.414]PMU: dcdc2 900
  1572. [ 0.417]PMU: pll1 1008 Mhz
  1573. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  1574. set power on vol to default
  1575. dcdc1_vol = 3300, onoff=1
  1576. dcdc2_vol = 900, onoff=1
  1577. dcdc3_vol = 900, onoff=1
  1578. dcdc4_vol = 900, onoff=1
  1579. dcdc6_vol = 900, onoff=1
  1580. aldo1_vol = 1800, onoff=0
  1581. aldo2_vol = 1800, onoff=1
  1582. aldo3_vol = 3000, onoff=1
  1583. eldo2_vol = 1800, onoff=0
  1584. dldo1_vol = 3300, onoff=0
  1585. dldo2_vol = 3300, onoff=0
  1586. dldo3_vol = 2500, onoff=1
  1587. dldo4_vol = 2800, onoff=0
  1588. fldo2_vol = 900, onoff=1
  1589. gpio0_vol = 3300, onoff=1
  1590. gpio1_vol = 3300, onoff=1
  1591. find power_sply to end
  1592. supply=dcdc1
  1593. axp=axp81x, supply=dcdc1, vol=3300
  1594. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  1595. supply=dcdc1
  1596. axp=axp81x, supply=dcdc1, vol=3300
  1597. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  1598. supply=dldo3
  1599. axp=axp81x, supply=dldo3, vol=1800
  1600. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  1601. supply=dcdc1
  1602. axp=axp81x, supply=dcdc1, vol=3300
  1603. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  1604. supply=dcdc1
  1605. axp=axp81x, supply=dcdc1, vol=3300
  1606. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  1607. supply=dcdc1
  1608. axp=axp81x, supply=dcdc1, vol=3300
  1609. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  1610. supply=dcdc1
  1611. axp=axp81x, supply=dcdc1, vol=3300
  1612. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  1613. supply=aldo3
  1614. axp=axp81x, supply=aldo3, vol=3000
  1615. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  1616. config gpio bias voltage finish
  1617. vbus exist
  1618. no battery, limit to dc
  1619. ac100 reg 0x00 = 0x101
  1620. ac100 reg 0xd0 = 0x0
  1621. ac100 reg 0xd1 = 0x0
  1622. __446__:(board.c:power_source_init)
  1623. [AXP81X]:[00]=[35]
  1624. [AXP81X]:[01]=[10]
  1625. [AXP81X]:[02]=[02]
  1626. [AXP81X]:[03]=[51]
  1627. [AXP81X]:[04]=[00]
  1628. [AXP81X]:[05]=[00]
  1629. [AXP81X]:[06]=[00]
  1630. [AXP81X]:[07]=[00]
  1631. [AXP81X]:[08]=[00]
  1632. [AXP81X]:[09]=[00]
  1633. [AXP81X]:[0A]=[00]
  1634. [AXP81X]:[0B]=[00]
  1635. [AXP81X]:[0C]=[00]
  1636. [AXP81X]:[0D]=[00]
  1637. [AXP81X]:[0E]=[00]
  1638. [AXP81X]:[0F]=[00]
  1639. [AXP81X]:[10]=[3F]
  1640. [AXP81X]:[11]=[00]
  1641. [AXP81X]:[12]=[20]
  1642. [AXP81X]:[13]=[C8]
  1643. [AXP81X]:[14]=[08]
  1644. [AXP81X]:[15]=[1A]
  1645. [AXP81X]:[16]=[1A]
  1646. [AXP81X]:[17]=[0B]
  1647. [AXP81X]:[18]=[15]
  1648. [AXP81X]:[19]=[00]
  1649. [AXP81X]:[1A]=[16]
  1650. [AXP81X]:[1B]=[00]
  1651. [AXP81X]:[1C]=[0B]
  1652. [AXP81X]:[1D]=[04]
  1653. [AXP81X]:[1E]=[00]
  1654. [AXP81X]:[1F]=[00]
  1655. [AXP81X]:[20]=[11]
  1656. [AXP81X]:[21]=[A8]
  1657. [AXP81X]:[22]=[A8]
  1658. [AXP81X]:[23]=[A8]
  1659. [AXP81X]:[24]=[A4]
  1660. [AXP81X]:[25]=[9E]
  1661. [AXP81X]:[26]=[A8]
  1662. [AXP81X]:[27]=[FC]
  1663. [AXP81X]:[28]=[0B]
  1664. [AXP81X]:[29]=[0B]
  1665. [AXP81X]:[2A]=[17]
  1666. [AXP81X]:[2B]=[00]
  1667. [AXP81X]:[2C]=[00]
  1668. [AXP81X]:[2D]=[B0]
  1669. [AXP81X]:[2E]=[40]
  1670. [AXP81X]:[2F]=[00]
  1671. [AXP81X]:[30]=[03]
  1672. [AXP81X]:[31]=[03]
  1673. [AXP81X]:[32]=[43]
  1674. [AXP81X]:[33]=[C8]
  1675. [AXP81X]:[34]=[45]
  1676. [AXP81X]:[35]=[68]
  1677. [AXP81X]:[36]=[59]
  1678. [AXP81X]:[37]=[00]
  1679. [AXP81X]:[38]=[A5]
  1680. [AXP81X]:[39]=[1F]
  1681. [AXP81X]:[3A]=[80]
  1682. [AXP81X]:[3B]=[08]
  1683. [AXP81X]:[3C]=[FC]
  1684. [AXP81X]:[3D]=[16]
  1685. [AXP81X]:[3E]=[7C]
  1686. BPI-M3:[AXP81X]:[3A]=[80]
  1687. BPI-M3: [AXP81X]: set [3A]=[85]
  1688. BPI-M3:[AXP81X]: read [3A]=[85]
  1689. BPI-M3: [AXP81X]: set [35]=[83]
  1690. BPI-M3:[AXP81X]: read [35]=[83]
  1691. BPI-M3:[AXP81X]: do_reset
  1692. resetting ...
  1693. set next mode 14
  1694. drv_disp_exit
  1695. [ 1.811][mmc]: MMC Device 2 not found
  1696. [ 1.815][mmc]: mmc not find,so not exit
  1697.  
  1698. HELLO! BOOT0 is starting!
  1699. boot0 version : 4.0.0
  1700. rtc[1] value = 0x00010000
  1701. rtc[2] value = 0x00020000
  1702. rtc[3] value = 0x00030000
  1703. DRAM DRIVE INFO: V1.0
  1704. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  1705. DRAM normal_mode value: 00000001
  1706. DRAM CLK =672 MHZ
  1707. PMU: AXP81X
  1708. ddr voltage = 1200 mv
  1709. using ic A83T
  1710. using axp AXP813
  1711. DRAM zq value: 00003bfb
  1712. dram size =2048
  1713. card boot number = 0
  1714. card no is 0
  1715. sdcard 0 line count 0
  1716. [mmc]: mmc driver ver 2014-8-11 15:06:39
  1717. [mmc]: ***Try SD card 0***
  1718. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  1719. [mmc]: vendor: Man 00035344 Snr 83562d79
  1720. [mmc]: product: SL16G
  1721. [mmc]: revision: 8.0
  1722. [mmc]: ***SD/MMC 0 init OK!!!***
  1723. sdcard 0 init ok
  1724. ERROR! NOT find the head of uboot.
  1725. The size of uboot is 000d8000.
  1726. sum=ce3ec68c
  1727. src_sum=ce3ec68c
  1728. Succeed in loading uboot from sdmmc flash.
  1729. Ready to disable icache.
  1730. Jump to secend Boot.
  1731. normal mode
  1732.  
  1733. [ 0.313]
  1734.  
  1735. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  1736.  
  1737. [ 0.322]version: 2.1.0
  1738. normal mode
  1739. [ 0.402]pmbus: normal or secure os
  1740. ready
  1741. [ 0.406]PMU: AXP81X
  1742. [ 0.408]PMU: AXP81X found
  1743. bat_vol=0, ratio=100
  1744. [ 0.414]PMU: dcdc2 900
  1745. [ 0.416]PMU: pll1 1008 Mhz
  1746. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  1747. set power on vol to default
  1748. dcdc1_vol = 3300, onoff=1
  1749. dcdc2_vol = 900, onoff=1
  1750. dcdc3_vol = 900, onoff=1
  1751. dcdc4_vol = 900, onoff=1
  1752. dcdc6_vol = 900, onoff=1
  1753. aldo1_vol = 1800, onoff=0
  1754. aldo2_vol = 1800, onoff=1
  1755. aldo3_vol = 3000, onoff=1
  1756. eldo2_vol = 1800, onoff=0
  1757. dldo1_vol = 3300, onoff=0
  1758. dldo2_vol = 3300, onoff=0
  1759. dldo3_vol = 2500, onoff=1
  1760. dldo4_vol = 2800, onoff=0
  1761. fldo2_vol = 900, onoff=1
  1762. gpio0_vol = 3300, onoff=1
  1763. gpio1_vol = 3300, onoff=1
  1764. find power_sply to end
  1765. supply=dcdc1
  1766. axp=axp81x, supply=dcdc1, vol=3300
  1767. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  1768. supply=dcdc1
  1769. axp=axp81x, supply=dcdc1, vol=3300
  1770. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  1771. supply=dldo3
  1772. axp=axp81x, supply=dldo3, vol=1800
  1773. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  1774. supply=dcdc1
  1775. axp=axp81x, supply=dcdc1, vol=3300
  1776. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  1777. supply=dcdc1
  1778. axp=axp81x, supply=dcdc1, vol=3300
  1779. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  1780. supply=dcdc1
  1781. axp=axp81x, supply=dcdc1, vol=3300
  1782. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  1783. supply=dcdc1
  1784. axp=axp81x, supply=dcdc1, vol=3300
  1785. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  1786. supply=aldo3
  1787. axp=axp81x, supply=aldo3, vol=3000
  1788. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  1789. config gpio bias voltage finish
  1790. vbus exist
  1791. no battery, limit to dc
  1792. ac100 reg 0x00 = 0x101
  1793. ac100 reg 0xd0 = 0x0
  1794. ac100 reg 0xd1 = 0x0
  1795. __446__:(board.c:power_source_init)
  1796. [AXP81X]:[00]=[35]
  1797. [AXP81X]:[01]=[10]
  1798. [AXP81X]:[02]=[02]
  1799. [AXP81X]:[03]=[51]
  1800. [AXP81X]:[04]=[00]
  1801. [AXP81X]:[05]=[00]
  1802. [AXP81X]:[06]=[00]
  1803. [AXP81X]:[07]=[00]
  1804. [AXP81X]:[08]=[00]
  1805. [AXP81X]:[09]=[00]
  1806. [AXP81X]:[0A]=[00]
  1807. [AXP81X]:[0B]=[00]
  1808. [AXP81X]:[0C]=[00]
  1809. [AXP81X]:[0D]=[00]
  1810. [AXP81X]:[0E]=[00]
  1811. [AXP81X]:[0F]=[0E]
  1812. [AXP81X]:[10]=[3F]
  1813. [AXP81X]:[11]=[00]
  1814. [AXP81X]:[12]=[20]
  1815. [AXP81X]:[13]=[C8]
  1816. [AXP81X]:[14]=[08]
  1817. [AXP81X]:[15]=[1A]
  1818. [AXP81X]:[16]=[1A]
  1819. [AXP81X]:[17]=[0B]
  1820. [AXP81X]:[18]=[15]
  1821. [AXP81X]:[19]=[00]
  1822. [AXP81X]:[1A]=[16]
  1823. [AXP81X]:[1B]=[00]
  1824. [AXP81X]:[1C]=[0B]
  1825. [AXP81X]:[1D]=[04]
  1826. [AXP81X]:[1E]=[00]
  1827. [AXP81X]:[1F]=[00]
  1828. [AXP81X]:[20]=[11]
  1829. [AXP81X]:[21]=[A8]
  1830. [AXP81X]:[22]=[A8]
  1831. [AXP81X]:[23]=[A8]
  1832. [AXP81X]:[24]=[A4]
  1833. [AXP81X]:[25]=[9E]
  1834. [AXP81X]:[26]=[A8]
  1835. [AXP81X]:[27]=[FC]
  1836. [AXP81X]:[28]=[0B]
  1837. [AXP81X]:[29]=[0B]
  1838. [AXP81X]:[2A]=[17]
  1839. [AXP81X]:[2B]=[00]
  1840. [AXP81X]:[2C]=[00]
  1841. [AXP81X]:[2D]=[B0]
  1842. [AXP81X]:[2E]=[40]
  1843. [AXP81X]:[2F]=[00]
  1844. [AXP81X]:[30]=[03]
  1845. [AXP81X]:[31]=[03]
  1846. [AXP81X]:[32]=[43]
  1847. [AXP81X]:[33]=[C8]
  1848. [AXP81X]:[34]=[45]
  1849. [AXP81X]:[35]=[83]
  1850. [AXP81X]:[36]=[59]
  1851. [AXP81X]:[37]=[00]
  1852. [AXP81X]:[38]=[A5]
  1853. [AXP81X]:[39]=[1F]
  1854. [AXP81X]:[3A]=[85]
  1855. [AXP81X]:[3B]=[08]
  1856. [AXP81X]:[3C]=[FC]
  1857. [AXP81X]:[3D]=[16]
  1858. [AXP81X]:[3E]=[7C]
  1859. BPI-M3:[AXP81X]:[3A]=[85]
  1860. limit to 2500mA
  1861. fel key old mode
  1862. run key detect
  1863. no key found
  1864. no key input
  1865. dram_para_set start
  1866. dram_para_set end
  1867. [ 0.760]DRAM: 2 GiB
  1868. relocation Offset is: 75af7000
  1869. user_gpio config
  1870. user_gpio ok
  1871. gic: normal or no secure os mode
  1872. script config pll_de to 504 Mhz
  1873. script config pll_video1 to 297 Mhz
  1874. Not Found clk pll_video in script
  1875. enable power vcc-hdmi-18, ret=0
  1876. DRV_DISP_Init end
  1877. [ 0.998]boot_disp.output_disp=1
  1878. [ 1.002]boot_disp.output_type=3
  1879. [ 1.005]boot_disp.output_mode=5
  1880. [ 1.008]fetch script data boot_disp.auto_hpd fail
  1881. disp1 device type(4) enable
  1882. attched ok, mgr1<-->device1, type=4, mode=5----
  1883. ready to set mode
  1884. workmode = 0
  1885. MMC: 0
  1886. [ 1.043][mmc]: mmc driver ver 2015-04-13 14:50:00
  1887. [ 1.048][mmc]: get sdc_phy_wipe fail.
  1888. [ 1.052][mmc]: get sdc0 sdc_erase fail.
  1889. [ 1.056][mmc]: get sdc_f_max fail,use default 50000000Hz
  1890. [ 1.061][mmc]: get sdc_ex_dly_used fail,use default dly
  1891. [ 1.067][mmc]: SUNXI SD/MMC: 0
  1892. [ 1.080][mmc]: *Try SD card 0*
  1893. [ 1.124][mmc]: CID 0x3534453 0x4c313647 0x8083562d 0x790103f3
  1894. [ 1.129][mmc]: mmc clk 50000000
  1895. [ 1.133][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  1896. [ 1.138][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  1897. [ 1.143][mmc]: ***SD/MMC 0 init OK!!!***
  1898. [ 1.152][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  1899. [ 1.157][mmc]: secure_feature 0x0
  1900. [ 1.161][mmc]: secure_removal_type 0x0
  1901. [ 1.165]sunxi flash init ok
  1902. [ 1.173][mmc]: MMC Device 2 not found
  1903. [ 1.177][mmc]: Can not find mmc dev
  1904. [ 1.180][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  1905. sunxi_secstorage_read fail
  1906. get secure storage map err
  1907. sunxi secure storage is not supported
  1908. private partition is not exist
  1909. In: serial
  1910. Out: serial
  1911. Err: serial
  1912. --------fastboot partitions--------
  1913. -total partitions:6-
  1914. -name- -start- -size-
  1915. boot-res : 1000000 2000000
  1916. env : 3000000 1000000
  1917. boot : 4000000 1000000
  1918. rootfs : 5000000 20000000
  1919. klog : 25000000 1000000
  1920. UDISK : 26000000 0
  1921. -----------------------------------
  1922. base bootcmd=run setargs_nand boot_normal
  1923. bootcmd set setargs_mmc
  1924. key 0
  1925. recovery key high 10, low 8
  1926. cant find fstbt value
  1927. no misc partition is found
  1928. to be run cmd=run setargs_mmc boot_normal
  1929. serial is: 00000000000000000000
  1930. mount part name boot-res
  1931. cant open script.bin, maybe it is not exist
  1932. WORK_MODE_BOOT
  1933. board_status_probe
  1934. [ 1.286]pre sys mode
  1935. sunxi_bmp_logo_display
  1936. [ 1.412][mmc]: blkcnt should not be 0
  1937. [ 1.430]fetch script data boot_disp.output_disp fail
  1938. [ 1.435]screen_id =1, screen_width =1280, screen_height =720
  1939. [ 1.441]frame buffer address 46400000
  1940. [ 1.445]Hit any key to stop autoboot: 3  2  1  0
  1941. [ 4.700][mmc]: MMC Device 2 not found
  1942.  
  1943. ** Invalid boot device **
  1944. [ 4.714][mmc]: blkcnt should not be 0
  1945. Loaded environment from uEnv.txt
  1946. Running uenvcmd ...
  1947. Banaan Pi bpi-m3 chip: a83t Service: linux
  1948.  
  1949. ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
  1950. ## Booting kernel from Legacy Image at 48000000 ...
  1951. Image Name: Linux-3.4.39-BPI-M3-Kernel
  1952. Image Type: ARM Linux Kernel Image (uncompressed)
  1953. Data Size: 5717288 Bytes = 5.5 MiB
  1954. Load Address: 40008000
  1955. Entry Point: 40008000
  1956. Verifying Checksum ... OK
  1957. Loading Kernel Image ... OK
  1958. OK
  1959. [ 5.095][mmc]: MMC Device 2 not found
  1960. [ 5.098][mmc]: mmc not find,so not exit
  1961. [ 5.102]
  1962. Starting kernel ...
  1963.  
  1964. [sun8i_fixup]: From boot, get meminfo:
  1965.  
  1966. Start: 0x40000000
  1967.  
  1968. Size: 2048MB
  1969.  
  1970. ion_carveout reserve: 96m 128m
  1971.  
  1972. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  1973.  
  1974. ion_cma reserve: 120m 176m 512m
  1975.  
  1976. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  1977.  
  1978. ------sun8i_smp_init_ops----37-----
  1979.  
  1980. [ 0.000000] Booting Linux on physical CPU 0
  1981. [ 0.000000] Initializing cgroup subsys cpuset
  1982. [ 0.000000] Initializing cgroup subsys cpu
  1983. [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
  1984. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  1985. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1986. [ 0.000000] Machine: sun8i
  1987. [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
  1988. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  1989. [ 0.000000] On node 0 totalpages: 524288
  1990. [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
  1991. [ 0.000000] Normal zone: 1404 pages used for memmap
  1992. [ 0.000000] Normal zone: 0 pages reserved
  1993. [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
  1994. [ 0.000000] HighMem zone: 3204 pages used for memmap
  1995. [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
  1996. [ 0.000000] script_init enter!
  1997. [ 0.000000] script_init exit!
  1998. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  1999. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
  2000. [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  2001. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  2002. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  2003. [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
  2004. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  2005. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  2006. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  2007. <6>[ 0.000000] allocated 4194304 bytes of page_cgroup
  2008. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  2009. [ 0.000000] Memory: 2048MB = 2048MB total
  2010. [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
  2011. [ 0.000000] Virtual kernel memory layout:
  2012. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  2013. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  2014. [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  2015. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  2016. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  2017. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  2018. [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
  2019. [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
  2020. [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
  2021. [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
  2022. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  2023. [ 0.000000] Preemptible hierarchical RCU implementation.
  2024. [ 0.000000] NR_IRQS:544
  2025. [ 0.000000] Architected local timer running at 24.00MHz.
  2026. [ 0.000000] Switching to timer-based delay loop
  2027. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  2028. [ 0.000000] Console: colour dummy device 80x30
  2029. [ 0.000000] console [tty1] enabled
  2030. [ 0.001350] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  2031. [ 0.001423] pid_max: default: 32768 minimum: 301
  2032. [ 0.001761] Mount-cache hash table entries: 512
  2033. [ 0.003106] Initializing cgroup subsys cpuacct
  2034. [ 0.003151] Initializing cgroup subsys memory
  2035. [ 0.003223] Initializing cgroup subsys devices
  2036. [ 0.003258] Initializing cgroup subsys freezer
  2037. [ 0.003290] Initializing cgroup subsys blkio
  2038. [ 0.003343] Initializing cgroup subsys perf_event
  2039. [ 0.003443] CPU: Testing write buffer coherency: ok
  2040. [ 0.003533] ftrace: allocating 27619 entries in 81 pages
  2041. [ 0.040300] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  2042. [ 0.040383] Setting up static identity map for 0x4076b5a8 - 0x4076b600
  2043. [ 0.010000] CPU1: Booted secondary processor
  2044. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  2045. [ 0.010000] CPU2: Booted secondary processor
  2046. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  2047. [ 0.010000] CPU3: Booted secondary processor
  2048. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  2049. [ 0.260088] CPU4: failed to boot: -22
  2050. [ 0.300067] CPU5: failed to boot: -22
  2051. [ 0.340069] CPU6: failed to boot: -22
  2052. [ 0.380093] CPU7: failed to boot: -22
  2053. [ 0.380309] Brought up 4 CPUs
  2054. [ 0.380335] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  2055. [ 0.380912] devtmpfs: initialized
  2056. [ 0.390045] pinctrl core: initialized pinctrl subsystem
  2057. [ 0.411135] NET: Registered protocol family 16
  2058. [ 0.434463] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  2059. [ 0.434576] script_sysfs_init success
  2060. [ 0.434628] sunxi_dump_init success
  2061. [ 0.435761] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  2062. [ 0.437580] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  2063. [ 0.438040] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  2064. [ 0.439290] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  2065. [ 0.439335] hw-breakpoint: maximum watchpoint size is 8 bytes.
  2066. [ 0.440428] [sunxi-module]: [sunxi-module.0] probe success
  2067. [ 0.440887] script config pll_video1 to 297 Mhz
  2068. [ 0.440922] script config pll_ve to 432 Mhz
  2069. [ 0.440946] Not Found clk pll_periph in script
  2070. [ 0.440975] script config pll_gpu to 432 Mhz
  2071. [ 0.441003] script config pll_hsic to 480 Mhz
  2072. [ 0.441032] script config pll_de to 504 Mhz
  2073. [ 0.441054] sunxi_default_clk_init
  2074. [ 0.441074] try to set pll6ahb1 to 200000000
  2075. [ 0.441135] try to set ahb clk source to pll6ahb1
  2076. [ 0.441159] set ahb clk source to pll6ahb1
  2077. [ 0.441184] try to set ahb1 to 200000000
  2078. [ 0.441209] try to set apb1 to 100000000
  2079. [ 0.442165] ===fe3o4==== sunxi_root_procfs_attach ret:0
  2080. [ 0.451831] bio: create slab <bio-0> at 0
  2081. [ 0.451831] [ARISC] :sunxi-arisc driver v1.70
  2082. [ 0.463918] [ARISC] :arisc version: [v0.1.25.3]
  2083. [ 0.463975] [sunxi-module]: arisc register success
  2084. [ 0.464408] sunxi_get_soc_bin: slow chip
  2085. [ 0.464854] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  2086. [ 0.010000] CPU4: Booted secondary processor
  2087. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  2088. [ 0.010000] CPU5: Booted secondary processor
  2089. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  2090. [ 0.010000] CPU6: Booted secondary processor
  2091. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  2092. [ 0.010000] CPU7: Booted secondary processor
  2093. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  2094. [ 0.491432] SCSI subsystem initialized
  2095. [ 0.491432] libata version 3.00 loaded.
  2096. [ 0.491432] usbcore: registered new interface driver usbfs
  2097. [ 0.491432] usbcore: registered new interface driver hub
  2098. [ 0.491432] usbcore: registered new device driver usb
  2099. [ 0.491432] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  2100. [ 0.491432] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  2101. [ 0.491432] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  2102. [ 0.491696] Linux video capture interface: v2.00
  2103. [ 0.501154] BPI-M3: tmp [00]
  2104. [ 0.501154] BPI-M3: set PMIC AC 4000mA
  2105. [ 0.501154] BPI-M3: set PMIC AC 4000mA
  2106. [ 0.510404] Advanced Linux Sound Architecture Driver Version 1.0.25.
  2107. [ 0.511062] Bluetooth: Core ver 2.16
  2108. [ 0.511132] NET: Registered protocol family 31
  2109. [ 0.511157] Bluetooth: HCI device and connection manager initialized
  2110. [ 0.511190] Bluetooth: HCI socket layer initialized
  2111. [ 0.511216] Bluetooth: L2CAP socket layer initialized
  2112. [ 0.511263] Bluetooth: SCO socket layer initialized
  2113. [ 0.511550] cfg80211: Calling CRDA to update world regulatory domain
  2114. [ 0.511644] Switching to clocksource arch_sys_counter
  2115. [ 0.537835] FS-Cache: Loaded
  2116. [ 0.538182] CacheFiles: Loaded
  2117. [ 0.549900] axp81x_dcdc1: Failed to create debugfs directory
  2118. [ 0.551156] NET: Registered protocol family 2
  2119. [ 0.551548] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  2120. [ 0.552321] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  2121. [ 0.554815] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  2122. [ 0.556393] TCP: Hash tables configured (established 131072 bind 65536)
  2123. [ 0.556425] TCP: reno registered
  2124. [ 0.556451] UDP hash table entries: 512 (order: 2, 16384 bytes)
  2125. [ 0.556519] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  2126. [ 0.556978] NET: Registered protocol family 1
  2127. [ 0.557431] RPC: Registered named UNIX socket transport module.
  2128. [ 0.557464] RPC: Registered udp transport module.
  2129. [ 0.557488] RPC: Registered tcp transport module.
  2130. [ 0.557512] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2131. [ 0.558251] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  2132. [ 0.558437] [pm]aw_pm_init!
  2133. [ 0.558463] standby_mode = 1.
  2134. [ 0.558484] wakeup src cnt is : 2.
  2135. [ 0.558511] pmu name: pmu1_para .
  2136. [ 0.558537] pmu1_enable = 0x1.
  2137. [ 0.558558] pmux_id = 0x7.
  2138. [ 0.558580] pmu name: pmu2_para .
  2139. [ 0.558602] config_pmux_para: script_parser_fetch err.
  2140. [ 0.558627] pmu2_enable = 0x0.
  2141. [ 0.559043] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  2142. [ 0.559227] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  2143. [ 0.559267] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  2144. [ 0.559359] after inited: sys_mask config = 0xebd5.
  2145. [ 0.559387] dynamic_standby enalbe = 0x0.
  2146. [ 0.559440] sunxi_reg_init enter
  2147. [ 0.559765] lock super standby for a83!
  2148. [ 0.559797] lookup_scene_lock_name: new scene lock super_standby
  2149. [ 0.559825] scene_lock_init name=super_standby
  2150. [ 0.559852] scene_lock: super_standby, type 5, count 1
  2151. [ 0.561866] highmem bounce pool size: 64 pages
  2152. [ 0.569797] VFS: Disk quotas dquot_6.5.2
  2153. [ 0.570235] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  2154. [ 0.572405] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  2155. [ 0.572973] NFS: Registering the id_resolver key type
  2156. [ 0.573732] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  2157. [ 0.575008] NTFS driver 2.1.30 [Flags: R/W].
  2158. [ 0.575448] fuse init (API version 7.18)
  2159. [ 0.576583] ceph: loaded (mds proto 32)
  2160. [ 0.576629] msgmni has been set to 1175
  2161. [ 0.584727] alg: No test for stdrng (krng)
  2162. [ 0.668048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  2163. [ 0.668105] io scheduler noop registered
  2164. [ 0.668131] io scheduler deadline registered
  2165. [ 0.668339] io scheduler cfq registered (default)
  2166. [ 0.668861] pwm module init!
  2167. [ 0.669476] [DISP]disp_module_init
  2168. [ 0.704334] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  2169. [ 0.719603] Console: switching to colour frame buffer device 160x45
  2170. [ 0.735755] [DISP]disp_module_init finish
  2171. [ 0.811189] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  2172. [ 0.811399] sw_uart_pm()890 - uart0 clk is already enable
  2173. [ 0.811566] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  2174. [ 1.004171] console [ttyS0] enabled
  2175. [ 1.146170] axp81x_dcdc1: Failed to create debugfs directory
  2176. [ 1.310353] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  2177. [ 1.470640] axp81x_dcdc1: Failed to create debugfs directory
  2178. [ 1.789421] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  2179. [ 1.945573] [drm] Initialized drm 1.1.0 20060810
  2180. [ 2.105383] brd: module loaded
  2181. [ 2.109597] loop: module loaded
  2182. [ 2.109829] [rf_pm]: select module num is 10
  2183. [ 2.109839] [rf_pm]: module power1 name vcc-wifi-io
  2184. [ 2.109848] [rf_pm]: failed to fetch module_power1_vol
  2185. [ 2.109858] [rf_pm]: module power2 name
  2186. [ 2.109865] [rf_pm]: failed to fetch module_power2_vol
  2187. [ 2.109875] [rf_pm]: module power3 name
  2188. [ 2.109884] [rf_pm]: failed to fetch module_power3_vol
  2189. [ 2.109893] [rf_pm]: mod has no power_switch gpio
  2190. [ 2.109901] [rf_pm]: mod has no chip_en gpio
  2191. [ 2.109910] [rf_pm]: lpo_use_apclk: ac10032k2
  2192. [ 2.110075] [rf_pm]: get power regulator failed.
  2193. [ 2.110085] [rf_pm]: enable vcc-wifi-io.
  2194. [ 2.110704] [rf_pm]: mod info power switch -1
  2195. [ 2.110811] [rf_pm]: set ac10032k2 32k out
  2196. [ 2.110940] scene_lock_init name=rf_pm
  2197. [ 2.111276] [wifi_pm]: wifi gpio init is OK !!
  2198. [ 2.111357] [rfkill]: mod has no ls_int gpio
  2199. [ 2.111366] [rfkill]: mod has no pcm_ch gpio
  2200. [ 2.111678] [rfkill]: rfkill set power 0
  2201. [ 2.130102] Loading iSCSI transport class v2.0-870.
  2202. [ 2.130581] iscsi: registered transport (tcp)
  2203. [ 2.131080] [spi]: Found 1 spi devices in config files
  2204. [ 2.131092] boards_num modalias max_spd_hz bus_num cs mode
  2205. [ 2.131111] 0 spidev 33000000 0 0 3
  2206. [ 2.131568] axp81x_dcdc1: Failed to create debugfs directory
  2207. [ 2.131853] spi spi0: master is unqueued, this is deprecated
  2208. [ 2.132193] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  2209. [ 2.132206] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  2210. [ 2.133772] usbcore: registered new interface driver qf9700
  2211. [ 2.133841] usbcore: registered new interface driver smsc95xx
  2212. [ 2.133904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  2213. [ 2.154018] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  2214. [ 2.154052] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  2215. [ 2.266008] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  2216. [ 2.600057] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  2217. [ 2.773473] ehci_irq: highspeed device connect
  2218. [ 2.921002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  2219. [ 2.968904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2220. [ 2.980566] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  2221. [ 2.992602] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  2222. [ 3.003712] usb usb1: SerialNumber: sunxi-ehci
  2223. [ 3.013065] hub 1-0:1.0: USB hub found
  2224. [ 3.021005] hub 1-0:1.0: 1 port detected
  2225. [ 3.029500] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  2226. [ 3.060343] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  2227. [ 3.072807] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  2228. [ 3.085213] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  2229. [ 3.154132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  2230. [ 3.165745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2231. [ 3.177885] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  2232. [ 3.189985] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  2233. [ 3.201544] usb usb2: SerialNumber: sunxi-ohci
  2234. [ 3.211247] hub 2-0:1.0: USB hub found
  2235. [ 3.219618] hub 2-0:1.0: 1 port detected
  2236. [ 3.228636] Initializing USB Mass Storage driver...
  2237. [ 3.238440] usbcore: registered new interface driver usb-storage
  2238. [ 3.249419] USB Mass Storage support registered.
  2239. [ 3.258968] usbcore: registered new interface driver ums-alauda
  2240. [ 3.270062] usbcore: registered new interface driver ums-cypress
  2241. [ 3.281169] usbcore: registered new interface driver ums-datafab
  2242. [ 3.292225] usbcore: registered new interface driver ums_eneub6250
  2243. [ 3.303426] usbcore: registered new interface driver ums-freecom
  2244. [ 3.314335] usbcore: registered new interface driver ums-isd200
  2245. [ 3.325121] usbcore: registered new interface driver ums-jumpshot
  2246. [ 3.335974] usbcore: registered new interface driver ums-karma
  2247. [ 3.340169] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  2248. [ 3.357875] usbcore: registered new interface driver ums-onetouch
  2249. [ 3.368636] usbcore: registered new interface driver ums-realtek
  2250. [ 3.379204] usbcore: registered new interface driver ums-sddr09
  2251. [ 3.389683] usbcore: registered new interface driver ums-sddr55
  2252. [ 3.400062] usbcore: registered new interface driver ums-usbat
  2253. [ 3.410286] usbcore: registered new interface driver usbserial
  2254. [ 3.420355] usbcore: registered new interface driver usbserial_generic
  2255. [ 3.431123] USB Serial support registered for generic
  2256. [ 3.500704] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  2257. [ 3.511863] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  2258. [ 3.523336] usb 1-1: Product: USB 2.0 Hub
  2259. [ 3.531977] hub 1-1:1.0: USB hub found
  2260. [ 3.539709] hub 1-1:1.0: 4 ports detected
  2261. [ 3.548765] usbserial: USB Serial Driver core
  2262. [ 3.557271] file system registered
  2263. [ 3.566302] android_usb gadget: Mass Storage Function, version: 2009/09/11
  2264. [ 3.577430] android_usb gadget: Number of LUNs=3
  2265. [ 3.585950] lun0: LUN: removable file: (no medium)
  2266. [ 3.594699] lun1: LUN: removable file: (no medium)
  2267. [ 3.603360] lun2: LUN: removable file: (no medium)
  2268. [ 3.612342] android_usb gadget: android_usb ready
  2269. [ 3.621236] axp81x_dcdc1: Failed to create debugfs directory
  2270. [ 3.630811] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  2271. [ 3.640906] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  2272. [ 3.653493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  2273. [ 3.664337] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2274. [ 3.677947] usb usb3: Product: sunxi_hcd host driver
  2275. [ 3.689004] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  2276. [ 3.702533] usb usb3: SerialNumber: sunxi_hcd_host0
  2277. [ 3.714520] hub 3-0:1.0: USB hub found
  2278. [ 3.724214] hub 3-0:1.0: 1 port detected
  2279. [ 3.735341] mousedev: PS/2 mouse device common for all mice
  2280. [ 3.745285] sunxikbd_script_init: key para not found, used default para.
  2281. [ 3.757137] sunxi_rtc_init(796): sunxi rtc device register!
  2282. [ 3.757249] keyname:ctp_para subname:ctp_power_io ,get error!
  2283. [ 3.777475] get sysconfig para erro!
  2284. [ 3.777764] rtc_gettime(333): read time 1970-1-1 1:0:12
  2285. [ 3.778ñ
  2286.  
  2287. HELLO! BOOT0 is starting!
  2288. boot0 version : 4.0.0
  2289. rtc[1] value = 0x00010000
  2290. rtc[2] value = 0x00020000
  2291. rtc[3] value = 0x00030000
  2292. DRAM DRIVE INFO: V1.0
  2293. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  2294. DRAM normal_mode value: 00000001
  2295. DRAM CLK =672 MHZ
  2296. PMU: AXP81X
  2297. ddr voltage = 1200 mv
  2298. using ic A83T
  2299. using axp AXP813
  2300. DRAM zq value: 00003bfb
  2301. dram size =2048
  2302. card boot number = 0
  2303. card no is 0
  2304. sdcard 0 line count 0
  2305. [mmc]: mmc driver ver 2014-8-11 15:06:39
  2306. [mmc]: ***Try SD card 0***
  2307. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  2308. [mmc]: vendor: Man 00035344 Snr 83562d79
  2309. [mmc]: product: SL16G
  2310. [mmc]: revision: 8.0
  2311. [mmc]: ***SD/MMC 0 init OK!!!***
  2312. sdcard 0 init ok
  2313. ERROR! NOT find the head of uboot.
  2314. The size of uboot is 000d8000.
  2315. sum=ce3ec68c
  2316. src_sum=ce3ec68c
  2317. Succeed in loading uboot from sdmmc flash.
  2318. Ready to disable icache.
  2319. Jump to secend Boot.
  2320. normal mode
  2321.  
  2322. [ 0.313]
  2323.  
  2324. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  2325.  
  2326. [ 0.322]version: 2.1.0
  2327. normal mode
  2328. [ 0.402]pmbus: normal or secure os
  2329. ready
  2330. [ 0.406]PMU: AXP81X
  2331. [ 0.408]PMU: AXP81X found
  2332. bat_vol=167, ratio=100
  2333. [ 0.414]PMU: dcdc2 900
  2334. [ 0.416]PMU: pll1 1008 Mhz
  2335. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  2336. set power on vol to default
  2337. dcdc1_vol = 3300, onoff=1
  2338. dcdc2_vol = 900, onoff=1
  2339. dcdc3_vol = 900, onoff=1
  2340. dcdc4_vol = 900, onoff=1
  2341. dcdc6_vol = 900, onoff=1
  2342. aldo1_vol = 1800, onoff=0
  2343. aldo2_vol = 1800, onoff=1
  2344. aldo3_vol = 3000, onoff=1
  2345. eldo2_vol = 1800, onoff=0
  2346. dldo1_vol = 3300, onoff=0
  2347. dldo2_vol = 3300, onoff=0
  2348. dldo3_vol = 2500, onoff=1
  2349. dldo4_vol = 2800, onoff=0
  2350. fldo2_vol = 900, onoff=1
  2351. gpio0_vol = 3300, onoff=1
  2352. gpio1_vol = 3300, onoff=1
  2353. find power_sply to end
  2354. supply=dcdc1
  2355. axp=axp81x, supply=dcdc1, vol=3300
  2356. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  2357. supply=dcdc1
  2358. axp=axp81x, supply=dcdc1, vol=3300
  2359. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  2360. supply=dldo3
  2361. axp=axp81x, supply=dldo3, vol=1800
  2362. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  2363. supply=dcdc1
  2364. axp=axp81x, supply=dcdc1, vol=3300
  2365. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  2366. supply=dcdc1
  2367. axp=axp81x, supply=dcdc1, vol=3300
  2368. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  2369. supply=dcdc1
  2370. axp=axp81x, supply=dcdc1, vol=3300
  2371. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  2372. supply=dcdc1
  2373. axp=axp81x, supply=dcdc1, vol=3300
  2374. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  2375. supply=aldo3
  2376. axp=axp81x, supply=aldo3, vol=3000
  2377. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  2378. config gpio bias voltage finish
  2379. vbus exist
  2380. no battery, limit to dc
  2381. ac100 reg 0x00 = 0x101
  2382. ac100 reg 0xd0 = 0x0
  2383. ac100 reg 0xd1 = 0x0
  2384. __446__:(board.c:power_source_init)
  2385. [AXP81X]:[00]=[35]
  2386. [AXP81X]:[01]=[10]
  2387. [AXP81X]:[02]=[02]
  2388. [AXP81X]:[03]=[51]
  2389. [AXP81X]:[04]=[00]
  2390. [AXP81X]:[05]=[00]
  2391. [AXP81X]:[06]=[00]
  2392. [AXP81X]:[07]=[00]
  2393. [AXP81X]:[08]=[00]
  2394. [AXP81X]:[09]=[00]
  2395. [AXP81X]:[0A]=[00]
  2396. [AXP81X]:[0B]=[00]
  2397. [AXP81X]:[0C]=[00]
  2398. [AXP81X]:[0D]=[00]
  2399. [AXP81X]:[0E]=[00]
  2400. [AXP81X]:[0F]=[00]
  2401. [AXP81X]:[10]=[3F]
  2402. [AXP81X]:[11]=[00]
  2403. [AXP81X]:[12]=[20]
  2404. [AXP81X]:[13]=[C8]
  2405. [AXP81X]:[14]=[08]
  2406. [AXP81X]:[15]=[1A]
  2407. [AXP81X]:[16]=[1A]
  2408. [AXP81X]:[17]=[0B]
  2409. [AXP81X]:[18]=[15]
  2410. [AXP81X]:[19]=[00]
  2411. [AXP81X]:[1A]=[16]
  2412. [AXP81X]:[1B]=[00]
  2413. [AXP81X]:[1C]=[0B]
  2414. [AXP81X]:[1D]=[04]
  2415. [AXP81X]:[1E]=[00]
  2416. [AXP81X]:[1F]=[00]
  2417. [AXP81X]:[20]=[11]
  2418. [AXP81X]:[21]=[A8]
  2419. [AXP81X]:[22]=[A8]
  2420. [AXP81X]:[23]=[A8]
  2421. [AXP81X]:[24]=[A4]
  2422. [AXP81X]:[25]=[9E]
  2423. [AXP81X]:[26]=[A8]
  2424. [AXP81X]:[27]=[FC]
  2425. [AXP81X]:[28]=[0B]
  2426. [AXP81X]:[29]=[0B]
  2427. [AXP81X]:[2A]=[17]
  2428. [AXP81X]:[2B]=[00]
  2429. [AXP81X]:[2C]=[00]
  2430. [AXP81X]:[2D]=[B0]
  2431. [AXP81X]:[2E]=[40]
  2432. [AXP81X]:[2F]=[00]
  2433. [AXP81X]:[30]=[03]
  2434. [AXP81X]:[31]=[03]
  2435. [AXP81X]:[32]=[43]
  2436. [AXP81X]:[33]=[C8]
  2437. [AXP81X]:[34]=[45]
  2438. [AXP81X]:[35]=[68]
  2439. [AXP81X]:[36]=[59]
  2440. [AXP81X]:[37]=[00]
  2441. [AXP81X]:[38]=[A5]
  2442. [AXP81X]:[39]=[1F]
  2443. [AXP81X]:[3A]=[80]
  2444. [AXP81X]:[3B]=[08]
  2445. [AXP81X]:[3C]=[FC]
  2446. [AXP81X]:[3D]=[16]
  2447. [AXP81X]:[3E]=[7C]
  2448. BPI-M3:[AXP81X]:[3A]=[80]
  2449. BPI-M3: [AXP81X]: set [3A]=[85]
  2450. BPI-M3:[AXP81X]: read [3A]=[85]
  2451. BPI-M3: [AXP81X]: set [35]=[83]
  2452. BPI-M3:[AXP81X]: read [35]=[83]
  2453. BPI-M3:[AXP81X]: do_reset
  2454. resetting ...
  2455. set next mode 14
  2456. drv_disp_exit
  2457. [ 1.811][mmc]: MMC Device 2 not found
  2458. [ 1.815][mmc]: mmc not find,so not exit
  2459.  
  2460.  
  2461. HELLO! BOOT0 is starting!
  2462. boot0 version : 4.0.0
  2463. rtc[1] value = 0x00010000
  2464. rtc[2] value = 0x00020000
  2465. rtc[3] value = 0x00030000
  2466. DRAM DRIVE INFO: V1.0
  2467. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  2468. DRAM normal_mode value: 00000001
  2469. DRAM CLK =672 MHZ
  2470. PMU: AXP81X
  2471. ddr voltage = 1200 mv
  2472. using ic A83T
  2473. using axp AXP813
  2474. DRAM zq value: 00003bfb
  2475. dram size =2048
  2476. card boot number = 0
  2477. card no is 0
  2478. sdcard 0 line count 0
  2479. [mmc]: mmc driver ver 2014-8-11 15:06:39
  2480. [mmc]: ***Try SD card 0***
  2481. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  2482. [mmc]: vendor: Man 00035344 Snr 83562d79
  2483. [mmc]: product: SL16G
  2484. [mmc]: revision: 8.0
  2485. [mmc]: ***SD/MMC 0 init OK!!!***
  2486. sdcard 0 init ok
  2487. ERROR! NOT find the head of uboot.
  2488. The size of uboot is 000d8000.
  2489. sum=ce3ec68c
  2490. src_sum=ce3ec68c
  2491. Succeed in loading uboot from sdmmc flash.
  2492. Ready to disable icache.
  2493. Jump to secend Boot.
  2494. normal mode
  2495.  
  2496. [ 0.314]
  2497.  
  2498. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  2499.  
  2500. [ 0.322]version: 2.1.0
  2501. normal mode
  2502. [ 0.402]pmbus: normal or secure os
  2503. ready
  2504. [ 0.407]PMU: AXP81X
  2505. [ 0.409]PMU: AXP81X found
  2506. bat_vol=0, ratio=100
  2507. [ 0.414]PMU: dcdc2 900
  2508. [ 0.417]PMU: pll1 1008 Mhz
  2509. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  2510. set power on vol to default
  2511. dcdc1_vol = 3300, onoff=1
  2512. dcdc2_vol = 900, onoff=1
  2513. dcdc3_vol = 900, onoff=1
  2514. dcdc4_vol = 900, onoff=1
  2515. dcdc6_vol = 900, onoff=1
  2516. aldo1_vol = 1800, onoff=0
  2517. aldo2_vol = 1800, onoff=1
  2518. aldo3_vol = 3000, onoff=1
  2519. eldo2_vol = 1800, onoff=0
  2520. dldo1_vol = 3300, onoff=0
  2521. dldo2_vol = 3300, onoff=0
  2522. dldo3_vol = 2500, onoff=1
  2523. dldo4_vol = 2800, onoff=0
  2524. fldo2_vol = 900, onoff=1
  2525. gpio0_vol = 3300, onoff=1
  2526. gpio1_vol = 3300, onoff=1
  2527. find power_sply to end
  2528. supply=dcdc1
  2529. axp=axp81x, supply=dcdc1, vol=3300
  2530. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  2531. supply=dcdc1
  2532. axp=axp81x, supply=dcdc1, vol=3300
  2533. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  2534. supply=dldo3
  2535. axp=axp81x, supply=dldo3, vol=1800
  2536. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  2537. supply=dcdc1
  2538. axp=axp81x, supply=dcdc1, vol=3300
  2539. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  2540. supply=dcdc1
  2541. axp=axp81x, supply=dcdc1, vol=3300
  2542. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  2543. supply=dcdc1
  2544. axp=axp81x, supply=dcdc1, vol=3300
  2545. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  2546. supply=dcdc1
  2547. axp=axp81x, supply=dcdc1, vol=3300
  2548. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  2549. supply=aldo3
  2550. axp=axp81x, supply=aldo3, vol=3000
  2551. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  2552. config gpio bias voltage finish
  2553. vbus exist
  2554. no battery, limit to dc
  2555. ac100 reg 0x00 = 0x101
  2556. ac100 reg 0xd0 = 0x0
  2557. ac100 reg 0xd1 = 0x0
  2558. __446__:(board.c:power_source_init)
  2559. [AXP81X]:[00]=[35]
  2560. [AXP81X]:[01]=[10]
  2561. [AXP81X]:[02]=[02]
  2562. [AXP81X]:[03]=[51]
  2563. [AXP81X]:[04]=[00]
  2564. [AXP81X]:[05]=[00]
  2565. [AXP81X]:[06]=[00]
  2566. [AXP81X]:[07]=[00]
  2567. [AXP81X]:[08]=[00]
  2568. [AXP81X]:[09]=[00]
  2569. [AXP81X]:[0A]=[00]
  2570. [AXP81X]:[0B]=[00]
  2571. [AXP81X]:[0C]=[00]
  2572. [AXP81X]:[0D]=[00]
  2573. [AXP81X]:[0E]=[00]
  2574. [AXP81X]:[0F]=[0E]
  2575. [AXP81X]:[10]=[3F]
  2576. [AXP81X]:[11]=[00]
  2577. [AXP81X]:[12]=[20]
  2578. [AXP81X]:[13]=[C8]
  2579. [AXP81X]:[14]=[08]
  2580. [AXP81X]:[15]=[1A]
  2581. [AXP81X]:[16]=[1A]
  2582. [AXP81X]:[17]=[0B]
  2583. [AXP81X]:[18]=[15]
  2584. [AXP81X]:[19]=[00]
  2585. [AXP81X]:[1A]=[16]
  2586. [AXP81X]:[1B]=[00]
  2587. [AXP81X]:[1C]=[0B]
  2588. [AXP81X]:[1D]=[04]
  2589. [AXP81X]:[1E]=[00]
  2590. [AXP81X]:[1F]=[00]
  2591. [AXP81X]:[20]=[11]
  2592. [AXP81X]:[21]=[A8]
  2593. [AXP81X]:[22]=[A8]
  2594. [AXP81X]:[23]=[A8]
  2595. [AXP81X]:[24]=[A4]
  2596. [AXP81X]:[25]=[9E]
  2597. [AXP81X]:[26]=[A8]
  2598. [AXP81X]:[27]=[FC]
  2599. [AXP81X]:[28]=[0B]
  2600. [AXP81X]:[29]=[0B]
  2601. [AXP81X]:[2A]=[17]
  2602. [AXP81X]:[2B]=[00]
  2603. [AXP81X]:[2C]=[00]
  2604. [AXP81X]:[2D]=[B0]
  2605. [AXP81X]:[2E]=[40]
  2606. [AXP81X]:[2F]=[00]
  2607. [AXP81X]:[30]=[03]
  2608. [AXP81X]:[31]=[03]
  2609. [AXP81X]:[32]=[43]
  2610. [AXP81X]:[33]=[C8]
  2611. [AXP81X]:[34]=[45]
  2612. [AXP81X]:[35]=[83]
  2613. [AXP81X]:[36]=[59]
  2614. [AXP81X]:[37]=[00]
  2615. [AXP81X]:[38]=[A5]
  2616. [AXP81X]:[39]=[1F]
  2617. [AXP81X]:[3A]=[85]
  2618. [AXP81X]:[3B]=[08]
  2619. [AXP81X]:[3C]=[FC]
  2620. [AXP81X]:[3D]=[16]
  2621. [AXP81X]:[3E]=[7C]
  2622. BPI-M3:[AXP81X]:[3A]=[85]
  2623. limit to 2500mA
  2624. fel key old mode
  2625. run key detect
  2626. no key found
  2627. no key input
  2628. dram_para_set start
  2629. dram_para_set end
  2630. [ 0.760]DRAM: 2 GiB
  2631. relocation Offset is: 75af7000
  2632. user_gpio config
  2633. user_gpio ok
  2634. gic: normal or no secure os mode
  2635. script config pll_de to 504 Mhz
  2636. script config pll_video1 to 297 Mhz
  2637. Not Found clk pll_video in script
  2638. enable power vcc-hdmi-18, ret=0
  2639. DRV_DISP_Init end
  2640. [ 0.998]boot_disp.output_disp=1
  2641. [ 1.002]boot_disp.output_type=3
  2642. [ 1.005]boot_disp.output_mode=5
  2643. [ 1.008]fetch script data boot_disp.auto_hpd fail
  2644. disp1 device type(4) enable
  2645. attched ok, mgr1<-->device1, type=4, mode=5----
  2646. ready to set mode
  2647. workmode = 0
  2648. MMC: 0
  2649. [ 1.043][mmc]: mmc driver ver 2015-04-13 14:50:00
  2650. [ 1.048][mmc]: get sdc_phy_wipe fail.
  2651. [ 1.052][mmc]: get sdc0 sdc_erase fail.
  2652. [ 1.056][mmc]: get sdc_f_max fail,use default 50000000Hz
  2653. [ 1.061][mmc]: get sdc_ex_dly_used fail,use default dly
  2654. [ 1.067][mmc]: SUNXI SD/MMC: 0
  2655. [ 1.080][mmc]: *Try SD card 0*
  2656. [ 1.124][mmc]: CID 0x3534453 0x4c313647 0x8083562d 0x790103f3
  2657. [ 1.129][mmc]: mmc clk 50000000
  2658. [ 1.133][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  2659. [ 1.138][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  2660. [ 1.143][mmc]: ***SD/MMC 0 init OK!!!***
  2661. [ 1.151][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  2662. [ 1.157][mmc]: secure_feature 0x0
  2663. [ 1.160][mmc]: secure_removal_type 0x0
  2664. [ 1.164]sunxi flash init ok
  2665. [ 1.172][mmc]: MMC Device 2 not found
  2666. [ 1.175][mmc]: Can not find mmc dev
  2667. [ 1.179][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  2668. sunxi_secstorage_read fail
  2669. get secure storage map err
  2670. sunxi secure storage is not supported
  2671. private partition is not exist
  2672. In: serial
  2673. Out: serial
  2674. Err: serial
  2675. --------fastboot partitions--------
  2676. -total partitions:6-
  2677. -name- -start- -size-
  2678. boot-res : 1000000 2000000
  2679. env : 3000000 1000000
  2680. boot : 4000000 1000000
  2681. rootfs : 5000000 20000000
  2682. klog : 25000000 1000000
  2683. UDISK : 26000000 0
  2684. -----------------------------------
  2685. base bootcmd=run setargs_nand boot_normal
  2686. bootcmd set setargs_mmc
  2687. key 0
  2688. recovery key high 10, low 8
  2689. cant find fstbt value
  2690. no misc partition is found
  2691. to be run cmd=run setargs_mmc boot_normal
  2692. serial is: 00000000000000000000
  2693. mount part name boot-res
  2694. cant open script.bin, maybe it is not exist
  2695. WORK_MODE_BOOT
  2696. board_status_probe
  2697. [ 1.285]pre sys mode
  2698. sunxi_bmp_logo_display
  2699. [ 1.410][mmc]: blkcnt should not be 0
  2700. [ 1.428]fetch script data boot_disp.output_disp fail
  2701. [ 1.433]screen_id =1, screen_width =1280, screen_height =720
  2702. [ 1.439]frame buffer address 46400000
  2703. [ 1.443]Hit any key to stop autoboot: 3  2  1  0
  2704. [ 4.699][mmc]: MMC Device 2 not found
  2705.  
  2706. ** Invalid boot device **
  2707. [ 4.712][mmc]: blkcnt should not be 0
  2708. Loaded environment from uEnv.txt
  2709. Running uenvcmd ...
  2710. Banaan Pi bpi-m3 chip: a83t Service: linux
  2711.  
  2712. ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
  2713. ## Booting kernel from Legacy Image at 48000000 ...
  2714. Image Name: Linux-3.4.39-BPI-M3-Kernel
  2715. Image Type: ARM Linux Kernel Image (uncompressed)
  2716. Data Size: 5717288 Bytes = 5.5 MiB
  2717. Load Address: 40008000
  2718. Entry Point: 40008000
  2719. Verifying Checksum ... OK
  2720. Loading Kernel Image ... OK
  2721. OK
  2722. [ 5.092][mmc]: MMC Device 2 not found
  2723. [ 5.096][mmc]: mmc not find,so not exit
  2724. [ 5.100]
  2725. Starting kernel ...
  2726.  
  2727. [sun8i_fixup]: From boot, get meminfo:
  2728.  
  2729. Start: 0x40000000
  2730.  
  2731. Size: 2048MB
  2732.  
  2733. ion_carveout reserve: 96m 128m
  2734.  
  2735. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  2736.  
  2737. ion_cma reserve: 120m 176m 512m
  2738.  
  2739. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  2740.  
  2741. ------sun8i_smp_init_ops----37-----
  2742.  
  2743. [ 0.000000] Booting Linux on physical CPU 0
  2744. [ 0.000000] Initializing cgroup subsys cpuset
  2745. [ 0.000000] Initializing cgroup subsys cpu
  2746. [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
  2747. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  2748. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  2749. [ 0.000000] Machine: sun8i
  2750. [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
  2751. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  2752. [ 0.000000] On node 0 totalpages: 524288
  2753. [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
  2754. [ 0.000000] Normal zone: 1404 pages used for memmap
  2755. [ 0.000000] Normal zone: 0 pages reserved
  2756. [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
  2757. [ 0.000000] HighMem zone: 3204 pages used for memmap
  2758. [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
  2759. [ 0.000000] script_init enter!
  2760. [ 0.000000] script_init exit!
  2761. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  2762. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
  2763. [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  2764. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  2765. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  2766. [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
  2767. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  2768. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  2769. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  2770. <6>[ 0.000000] allocated 4194304 bytes of page_cgroup
  2771. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  2772. [ 0.000000] Memory: 2048MB = 2048MB total
  2773. [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
  2774. [ 0.000000] Virtual kernel memory layout:
  2775. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  2776. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  2777. [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  2778. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  2779. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  2780. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  2781. [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
  2782. [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
  2783. [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
  2784. [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
  2785. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  2786. [ 0.000000] Preemptible hierarchical RCU implementation.
  2787. [ 0.000000] NR_IRQS:544
  2788. [ 0.000000] Architected local timer running at 24.00MHz.
  2789. [ 0.000000] Switching to timer-based delay loop
  2790. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  2791. [ 0.000000] Console: colour dummy device 80x30
  2792. [ 0.000000] console [tty1] enabled
  2793. [ 0.001419] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  2794. [ 0.001493] pid_max: default: 32768 minimum: 301
  2795. [ 0.001829] Mount-cache hash table entries: 512
  2796. [ 0.003178] Initializing cgroup subsys cpuacct
  2797. [ 0.003225] Initializing cgroup subsys memory
  2798. [ 0.003297] Initializing cgroup subsys devices
  2799. [ 0.003331] Initializing cgroup subsys freezer
  2800. [ 0.003363] Initializing cgroup subsys blkio
  2801. [ 0.003415] Initializing cgroup subsys perf_event
  2802. [ 0.003512] CPU: Testing write buffer coherency: ok
  2803. [ 0.003602] ftrace: allocating 27619 entries in 81 pages
  2804. [ 0.040301] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  2805. [ 0.040386] Setting up static identity map for 0x4076b5a8 - 0x4076b600
  2806. [ 0.010000] CPU1: Booted secondary processor
  2807. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  2808. [ 0.010000] CPU2: Booted secondary processor
  2809. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  2810. [ 0.010000] CPU3: Booted secondary processor
  2811. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  2812. [ 0.260088] CPU4: failed to boot: -22
  2813. [ 0.300068] CPU5: failed to boot: -22
  2814. [ 0.340070] CPU6: failed to boot: -22
  2815. [ 0.380091] CPU7: failed to boot: -22
  2816. [ 0.380308] Brought up 4 CPUs
  2817. [ 0.380333] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  2818. [ 0.380911] devtmpfs: initialized
  2819. [ 0.390053] pinctrl core: initialized pinctrl subsystem
  2820. [ 0.411171] NET: Registered protocol family 16
  2821. [ 0.433823] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  2822. [ 0.433936] script_sysfs_init success
  2823. [ 0.433989] sunxi_dump_init success
  2824. [ 0.435135] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  2825. [ 0.436958] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  2826. [ 0.437419] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  2827. [ 0.438670] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  2828. [ 0.438714] hw-breakpoint: maximum watchpoint size is 8 bytes.
  2829. [ 0.439569] [sunxi-module]: [sunxi-module.0] probe success
  2830. [ 0.440301] script config pll_video1 to 297 Mhz
  2831. [ 0.440337] script config pll_ve to 432 Mhz
  2832. [ 0.440361] Not Found clk pll_periph in script
  2833. [ 0.440390] script config pll_gpu to 432 Mhz
  2834. [ 0.440418] script config pll_hsic to 480 Mhz
  2835. [ 0.440446] script config pll_de to 504 Mhz
  2836. [ 0.440468] sunxi_default_clk_init
  2837. [ 0.440488] try to set pll6ahb1 to 200000000
  2838. [ 0.440550] try to set ahb clk source to pll6ahb1
  2839. [ 0.440575] set ahb clk source to pll6ahb1
  2840. [ 0.440599] try to set ahb1 to 200000000
  2841. [ 0.440624] try to set apb1 to 100000000
  2842. [ 0.441575] ===fe3o4==== sunxi_root_procfs_attach ret:0
  2843. [ 0.451200] bio: create slab <bio-0> at 0
  2844. [ 0.451200] [ARISC] :sunxi-arisc driver v1.70
  2845. [ 0.463297] [ARISC] :arisc version: [v0.1.25.3]
  2846. [ 0.463354] [sunxi-module]: arisc register success
  2847. [ 0.463787] sunxi_get_soc_bin: slow chip
  2848. [ 0.464234] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  2849. [ 0.010000] CPU4: Booted secondary processor
  2850. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  2851. [ 0.010000] CPU5: Booted secondary processor
  2852. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  2853. [ 0.010000] CPU6: Booted secondary processor
  2854. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  2855. [ 0.010000] CPU7: Booted secondary processor
  2856. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  2857. [ 0.491441] SCSI subsystem initialized
  2858. [ 0.491441] libata version 3.00 loaded.
  2859. [ 0.491441] usbcore: registered new interface driver usbfs
  2860. [ 0.491441] usbcore: registered new interface driver hub
  2861. [ 0.491441] usbcore: registered new device driver usb
  2862. [ 0.491441] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  2863. [ 0.491441] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  2864. [ 0.491441] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  2865. [ 0.491684] Linux video capture interface: v2.00
  2866. [ 0.500431] BPI-M3: tmp [00]
  2867. [ 0.500431] BPI-M3: set PMIC AC 4000mA
  2868. [ 0.500431] BPI-M3: set PMIC AC 4000mA
  2869. [ 0.510405] Advanced Linux Sound Architecture Driver Version 1.0.25.
  2870. [ 0.511069] Bluetooth: Core ver 2.16
  2871. [ 0.511140] NET: Registered protocol family 31
  2872. [ 0.511165] Bluetooth: HCI device and connection manager initialized
  2873. [ 0.511198] Bluetooth: HCI socket layer initialized
  2874. [ 0.511225] Bluetooth: L2CAP socket layer initialized
  2875. [ 0.511271] Bluetooth: SCO socket layer initialized
  2876. [ 0.511559] cfg80211: Calling CRDA to update world regulatory domain
  2877. [ 0.511650] Switching to clocksource arch_sys_counter
  2878. [ 0.537884] FS-Cache: Loaded
  2879. [ 0.538236] CacheFiles: Loaded
  2880. [ 0.549982] axp81x_dcdc1: Failed to create debugfs directory
  2881. [ 0.551246] NET: Registered protocol family 2
  2882. [ 0.551642] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  2883. [ 0.552421] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  2884. [ 0.554918] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  2885. [ 0.556498] TCP: Hash tables configured (established 131072 bind 65536)
  2886. [ 0.556529] TCP: reno registered
  2887. [ 0.556556] UDP hash table entries: 512 (order: 2, 16384 bytes)
  2888. [ 0.556623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  2889. [ 0.557079] NET: Registered protocol family 1
  2890. [ 0.557532] RPC: Registered named UNIX socket transport module.
  2891. [ 0.557566] RPC: Registered udp transport module.
  2892. [ 0.557589] RPC: Registered tcp transport module.
  2893. [ 0.557613] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2894. [ 0.558351] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  2895. [ 0.558541] [pm]aw_pm_init!
  2896. [ 0.558566] standby_mode = 1.
  2897. [ 0.558587] wakeup src cnt is : 2.
  2898. [ 0.558614] pmu name: pmu1_para .
  2899. [ 0.558639] pmu1_enable = 0x1.
  2900. [ 0.558660] pmux_id = 0x7.
  2901. [ 0.558682] pmu name: pmu2_para .
  2902. [ 0.558704] config_pmux_para: script_parser_fetch err.
  2903. [ 0.558729] pmu2_enable = 0x0.
  2904. [ 0.559149] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  2905. [ 0.559334] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  2906. [ 0.559374] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  2907. [ 0.559465] after inited: sys_mask config = 0xebd5.
  2908. [ 0.559493] dynamic_standby enalbe = 0x0.
  2909. [ 0.559549] sunxi_reg_init enter
  2910. [ 0.559876] lock super standby for a83!
  2911. [ 0.559910] lookup_scene_lock_name: new scene lock super_standby
  2912. [ 0.559938] scene_lock_init name=super_standby
  2913. [ 0.559964] scene_lock: super_standby, type 5, count 1
  2914. [ 0.561949] highmem bounce pool size: 64 pages
  2915. [ 0.569861] VFS: Disk quotas dquot_6.5.2
  2916. [ 0.570299] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  2917. [ 0.572468] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  2918. [ 0.573036] NFS: Registering the id_resolver key type
  2919. [ 0.573803] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  2920. [ 0.575077] NTFS driver 2.1.30 [Flags: R/W].
  2921. [ 0.575514] fuse init (API version 7.18)
  2922. [ 0.576654] ceph: loaded (mds proto 32)
  2923. [ 0.576700] msgmni has been set to 1175
  2924. [ 0.585048] alg: No test for stdrng (krng)
  2925. [ 0.668364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  2926. [ 0.668423] io scheduler noop registered
  2927. [ 0.668446] io scheduler deadline registered
  2928. [ 0.668654] io scheduler cfq registered (default)
  2929. [ 0.669178] pwm module init!
  2930. [ 0.669796] [DISP]disp_module_init
  2931. [ 0.703963] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  2932. [ 0.719217] Console: switching to colour frame buffer device 160x45
  2933. [ 0.735375] [DISP]disp_module_init finish
  2934. [ 0.810759] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  2935. [ 0.810968] sw_uart_pm()890 - uart0 clk is already enable
  2936. [ 0.811135] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  2937. [ 1.003746] console [ttyS0] enabled
  2938. [ 1.145774] axp81x_dcdc1: Failed to create debugfs directory
  2939. [ 1.310036] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  2940. [ 1.625980] axp81x_dcdc1: Failed to create debugfs directory
  2941. [ 1.944703] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  2942. [ 2.260518] [drm] Initialized drm 1.1.0 20060810
  2943. [ 2.431623] brd: module loaded
  2944. [ 2.600983] loop: module loaded
  2945. [ 2.608768] [rf_pm]: select module num is 10
  2946. [ 2.617698] [rf_pm]: module power1 name vcc-wifi-io
  2947. [ 2.627265] [rf_pm]: failed to fetch module_power1_vol
  2948. [ 2.637119] [rf_pm]: module power2 name
  2949. [ 2.645602] [rf_pm]: failed to fetch module_power2_vol
  2950. [ 2.655481] [rf_pm]: module power3 name
  2951. [ 2.663951] [rf_pm]: failed to fetch module_power3_vol
  2952. [ 2.673766] [rf_pm]: mod has no power_switch gpio
  2953. [ 2.683101] [rf_pm]: mod has no chip_en gpio
  2954. [ 2.691892] [rf_pm]: lpo_use_apclk: ac10032k2
  2955. [ 2.700879] [rf_pm]: get power regulator failed.
  2956. [ 2.710103] [rf_pm]: enable vcc-wifi-io.
  2957. [ 2.718949] [rf_pm]: mod info power switch -1
  2958. [ 2.727757] [rf_pm]: set ac10032k2 32k out
  2959. [ 2.736245] scene_lock_init name=rf_pm
  2960. [ 2.744486] [wifi_pm]: wifi gpio init is OK !!
  2961. [ 2.753287] [rfkill]: mod has no ls_int gpio
  2962. [ 2.761815] [rfkill]: mod has no pcm_ch gpio
  2963. [ 2.770611] [rfkill]: rfkill set power 0
  2964. [ 2.790091] Loading iSCSI transport class v2.0-870.
  2965. [ 2.799638] iscsi: registered transport (tcp)
  2966. [ 2.808600] [spi]: Found 1 spi devices in config files
  2967. [ 2.818032] boards_num modalias max_spd_hz bus_num cs mode
  2968. [ 2.830174] 0 spidev 33000000 0 0 3
  2969. [ 2.842776] axp81x_dcdc1: Failed to create debugfs directory
  2970. [ 2.853226] spi spi0: master is unqueued, this is deprecated
  2971. [ 2.863688] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  2972. [ 2.875802] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  2973. [ 2.887967] usbcore: registered new interface driver qf9700
  2974. [ 2.898122] usbcore: registered new interface driver smsc95xx
  2975. [ 2.908349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  2976. [ 2.939501] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  2977. [ 2.952249] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  2978. [ 2.965407] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  2979. [ 2.990056] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  2980. [ 3.000353] ehci_irq: highspeed device connect
  2981. [ 3.009071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  2982. [ 3.020363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2983. [ 3.032146] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  2984. [ 3.044342] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  2985. [ 3.055571] usb usb1: SerialNumber: sunxi-ehci
  2986. [ 3.065024] hub 1-0:1.0: USB hub found
  2987. [ 3.073064] hub 1-0:1.0: 1 port detected
  2988. [ 3.081685] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  2989. [ 3.112568] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  2990. [ 3.125117] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  2991. [ 3.137607] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  2992. [ 3.204132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  2993. [ 3.215820] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2994. [ 3.228034] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  2995. [ 3.240195] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  2996. [ 3.251820] usb usb2: SerialNumber: sunxi-ohci
  2997. [ 3.261592] hub 2-0:1.0: USB hub found
  2998. [ 3.270054] hub 2-0:1.0: 1 port detected
  2999. [ 3.279044] Initializing USB Mass Storage driver...
  3000. [ 3.288934] usbcore: registered new interface driver usb-storage
  3001. [ 3.299956] USB Mass Storage support registered.
  3002. [ 3.309537] usbcore: registered new interface driver ums-alauda
  3003. [ 3.320654] usbcore: registered new interface driver ums-cypress
  3004. [ 3.331805] usbcore: registered new interface driver ums-datafab
  3005. [ 3.342889] usbcore: registered new interface driver ums_eneub6250
  3006. [ 3.354124] usbcore: registered new interface driver ums-freecom
  3007. [ 3.365060] usbcore: registered new interface driver ums-isd200
  3008. [ 3.375879] usbcore: registered new interface driver ums-jumpshot
  3009. [ 3.386755] usbcore: registered new interface driver ums-karma
  3010. [ 3.397262] usbcore: registered new interface driver ums-onetouch
  3011. [ 3.400171] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  3012. [ 3.419294] usbcore: registered new interface driver ums-realtek
  3013. [ 3.429875] usbcore: registered new interface driver ums-sddr09
  3014. [ 3.440356] usbcore: registered new interface driver ums-sddr55
  3015. [ 3.450732] usbcore: registered new interface driver ums-usbat
  3016. [ 3.460961] usbcore: registered new interface driver usbserial
  3017. [ 3.471020] usbcore: registered new interface driver usbserial_generic
  3018. [ 3.481782] USB Serial support registered for generic
  3019. [ 3.560693] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  3020. [ 3.571706] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  3021. [ 3.583169] usb 1-1: Product: USB 2.0 Hub
  3022. [ 3.591711] hub 1-1:1.0: USB hub found
  3023. [ 3.599442] hub 1-1:1.0: 4 ports detected
  3024. [ 3.608502] usbserial: USB Serial Driver core
  3025. [ 3.617022] file system registered
  3026. [ 3.626059] android_usb gadget: Mass Storage Function, version: 2009/09/11
  3027. [ 3.637188] android_usb gadget: Number of LUNs=3
  3028. [ 3.645708] lun0: LUN: removable file: (no medium)
  3029. [ 3.654453] lun1: LUN: removable file: (no medium)
  3030. [ 3.663109] lun2: LUN: removable file: (no medium)
  3031. [ 3.672082] android_usb gadget: android_usb ready
  3032. [ 3.680976] axp81x_dcdc1: Failed to create debugfs directory
  3033. [ 3.690554] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  3034. [ 3.700639] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  3035. [ 3.713227] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  3036. [ 3.724070] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3037. [ 3.737669] usb usb3: Product: sunxi_hcd host driver
  3038. [ 3.748716] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  3039. [ 3.762249] usb usb3: SerialNumber: sunxi_hcd_host0
  3040. [ 3.774225] hub 3-0:1.0: USB hub found
  3041. [ 3.783913] hub 3-0:1.0: 1 port detected
  3042. [ 3.795044] mousedev: PS/2 mouse device common for all mice
  3043. [ 3.804987] sunxikbd_script_init: key para not found, used default para.
  3044. [ 3.816818] sunxi_rtc_init(796): sunxi rtc device register!
  3045. [ 3.816935] keyname:ctp_para subname:ctp_power_io ,get error!
  3046. [ 3.837167] get sysconfig para erro!
  3047. [ 3.837427] rtc_gettime(333): read time 1970-1-1 1:0:12
  3048. [ 3.837847] alarm_gettime(470)
  3049.  
  3050. HELLO! BOOT0 is starting!
  3051. boot0 version : 4.0.0
  3052. rtc[1] value = 0x00010000
  3053. rtc[2] value = 0x00020000
  3054. rtc[3] value = 0x00030000
  3055. DRAM DRIVE INFO: V1.0
  3056. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  3057. DRAM normal_mode value: 00000001
  3058. DRAM CLK =672 MHZ
  3059. PMU: AXP81X
  3060. ddr voltage = 1200 mv
  3061. using ic A83T
  3062. using axp AXP813
  3063. DRAM zq value: 00003bfb
  3064. dram size =2048
  3065. card boot number = 0
  3066. card no is 0
  3067. sdcard 0 line count 0
  3068. [mmc]: mmc driver ver 2014-8-11 15:06:39
  3069. [mmc]: ***Try SD card 0***
  3070. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  3071. [mmc]: vendor: Man 00035344 Snr 83562d79
  3072. [mmc]: product: SL16G
  3073. [mmc]: revision: 8.0
  3074. [mmc]: ***SD/MMC 0 init OK!!!***
  3075. sdcard 0 init ok
  3076. ERROR! NOT find the head of uboot.
  3077. The size of uboot is 000d8000.
  3078. sum=ce3ec68c
  3079. src_sum=ce3ec68c
  3080. Succeed in loading uboot from sdmmc flash.
  3081. Ready to disable icache.
  3082. Jump to secend Boot.
  3083. normal mode
  3084.  
  3085. [ 0.313]
  3086.  
  3087. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  3088.  
  3089. [ 0.322]version: 2.1.0
  3090. normal mode
  3091. [ 0.402]pmbus: normal or secure os
  3092. ready
  3093. [ 0.406]PMU: AXP81X
  3094. [ 0.408]PMU: AXP81X found
  3095. bat_vol=163, ratio=100
  3096. [ 0.414]PMU: dcdc2 900
  3097. [ 0.416]PMU: pll1 1008 Mhz
  3098. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  3099. set power on vol to default
  3100. dcdc1_vol = 3300, onoff=1
  3101. dcdc2_vol = 900, onoff=1
  3102. dcdc3_vol = 900, onoff=1
  3103. dcdc4_vol = 900, onoff=1
  3104. dcdc6_vol = 900, onoff=1
  3105. aldo1_vol = 1800, onoff=0
  3106. aldo2_vol = 1800, onoff=1
  3107. aldo3_vol = 3000, onoff=1
  3108. eldo2_vol = 1800, onoff=0
  3109. dldo1_vol = 3300, onoff=0
  3110. dldo2_vol = 3300, onoff=0
  3111. dldo3_vol = 2500, onoff=1
  3112. dldo4_vol = 2800, onoff=0
  3113. fldo2_vol = 900, onoff=1
  3114. gpio0_vol = 3300, onoff=1
  3115. gpio1_vol = 3300, onoff=1
  3116. find power_sply to end
  3117. supply=dcdc1
  3118. axp=axp81x, supply=dcdc1, vol=3300
  3119. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  3120. supply=dcdc1
  3121. axp=axp81x, supply=dcdc1, vol=3300
  3122. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  3123. supply=dldo3
  3124. axp=axp81x, supply=dldo3, vol=1800
  3125. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  3126. supply=dcdc1
  3127. axp=axp81x, supply=dcdc1, vol=3300
  3128. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  3129. supply=dcdc1
  3130. axp=axp81x, supply=dcdc1, vol=3300
  3131. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  3132. supply=dcdc1
  3133. axp=axp81x, supply=dcdc1, vol=3300
  3134. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  3135. supply=dcdc1
  3136. axp=axp81x, supply=dcdc1, vol=3300
  3137. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  3138. supply=aldo3
  3139. axp=axp81x, supply=aldo3, vol=3000
  3140. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  3141. config gpio bias voltage finish
  3142. vbus exist
  3143. no battery, limit to dc
  3144. ac100 reg 0x00 = 0x101
  3145. ac100 reg 0xd0 = 0x0
  3146. ac100 reg 0xd1 = 0x0
  3147. __446__:(board.c:power_source_init)
  3148. [AXP81X]:[00]=[35]
  3149. [AXP81X]:[01]=[10]
  3150. [AXP81X]:[02]=[02]
  3151. [AXP81X]:[03]=[51]
  3152. [AXP81X]:[04]=[00]
  3153. [AXP81X]:[05]=[00]
  3154. [AXP81X]:[06]=[00]
  3155. [AXP81X]:[07]=[00]
  3156. [AXP81X]:[08]=[00]
  3157. [AXP81X]:[09]=[00]
  3158. [AXP81X]:[0A]=[00]
  3159. [AXP81X]:[0B]=[00]
  3160. [AXP81X]:[0C]=[00]
  3161. [AXP81X]:[0D]=[00]
  3162. [AXP81X]:[0E]=[00]
  3163. [AXP81X]:[0F]=[00]
  3164. [AXP81X]:[10]=[3F]
  3165. [AXP81X]:[11]=[00]
  3166. [AXP81X]:[12]=[20]
  3167. [AXP81X]:[13]=[C8]
  3168. [AXP81X]:[14]=[08]
  3169. [AXP81X]:[15]=[1A]
  3170. [AXP81X]:[16]=[1A]
  3171. [AXP81X]:[17]=[0B]
  3172. [AXP81X]:[18]=[15]
  3173. [AXP81X]:[19]=[00]
  3174. [AXP81X]:[1A]=[16]
  3175. [AXP81X]:[1B]=[00]
  3176. [AXP81X]:[1C]=[0B]
  3177. [AXP81X]:[1D]=[04]
  3178. [AXP81X]:[1E]=[00]
  3179. [AXP81X]:[1F]=[00]
  3180. [AXP81X]:[20]=[11]
  3181. [AXP81X]:[21]=[A8]
  3182. [AXP81X]:[22]=[A8]
  3183. [AXP81X]:[23]=[A8]
  3184. [AXP81X]:[24]=[A4]
  3185. [AXP81X]:[25]=[9E]
  3186. [AXP81X]:[26]=[A8]
  3187. [AXP81X]:[27]=[FC]
  3188. [AXP81X]:[28]=[0B]
  3189. [AXP81X]:[29]=[0B]
  3190. [AXP81X]:[2A]=[17]
  3191. [AXP81X]:[2B]=[00]
  3192. [AXP81X]:[2C]=[00]
  3193. [AXP81X]:[2D]=[B0]
  3194. [AXP81X]:[2E]=[40]
  3195. [AXP81X]:[2F]=[00]
  3196. [AXP81X]:[30]=[03]
  3197. [AXP81X]:[31]=[03]
  3198. [AXP81X]:[32]=[43]
  3199. [AXP81X]:[33]=[C8]
  3200. [AXP81X]:[34]=[45]
  3201. [AXP81X]:[35]=[68]
  3202. [AXP81X]:[36]=[59]
  3203. [AXP81X]:[37]=[00]
  3204. [AXP81X]:[38]=[A5]
  3205. [AXP81X]:[39]=[1F]
  3206. [AXP81X]:[3A]=[80]
  3207. [AXP81X]:[3B]=[08]
  3208. [AXP81X]:[3C]=[FC]
  3209. [AXP81X]:[3D]=[16]
  3210. [AXP81X]:[3E]=[7C]
  3211. BPI-M3:[AXP81X]:[3A]=[80]
  3212. BPI-M3: [AXP81X]: set [3A]=[85]
  3213. BPI-M3:[AXP81X]: read [3A]=[85]
  3214. BPI-M3: [AXP81X]: set [35]=[83]
  3215. BPI-M3:[AXP81X]: read [35]=[83]
  3216. BPI-M3:[AXP81X]: do_reset
  3217. resetting ...
  3218. set next mode 14
  3219. drv_disp_exit
  3220. [ 1.811][mmc]: MMC Device 2 not found
  3221. [ 1.815][mmc]: mmc not find,so not exit
  3222.  
  3223. HELLO! BOOT0 is starting!
  3224. boot0 version : 4.0.0
  3225. rtc[1] value = 0x00010000
  3226. rtc[2] value = 0x00020000
  3227. rtc[3] value = 0x00030000
  3228. DRAM DRIVE INFO: V1.0
  3229. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  3230. DRAM normal_mode value: 00000001
  3231. DRAM CLK =672 MHZ
  3232. PMU: AXP81X
  3233. ddr voltage = 1200 mv
  3234. using ic A83T
  3235. using axp AXP813
  3236. DRAM zq value: 00003bfb
  3237. dram size =2048
  3238. card boot number = 0
  3239. card no is 0
  3240. sdcard 0 line count 0
  3241. [mmc]: mmc driver ver 2014-8-11 15:06:39
  3242. [mmc]: ***Try SD card 0***
  3243. [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  3244. [mmc]: vendor: Man 00035344 Snr 83562d79
  3245. [mmc]: product: SL16G
  3246. [mmc]: revision: 8.0
  3247. [mmc]: ***SD/MMC 0 init OK!!!***
  3248. sdcard 0 init ok
  3249. ERROR! NOT find the head of uboot.
  3250. The size of uboot is 000d8000.
  3251. sum=ce3ec68c
  3252. src_sum=ce3ec68c
  3253. Succeed in loading uboot from sdmmc flash.
  3254. Ready to disable icache.
  3255. Jump to secend Boot.
  3256. normal mode
  3257.  
  3258. [ 0.314]
  3259.  
  3260. U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
  3261.  
  3262. [ 0.322]version: 2.1.0
  3263. normal mode
  3264. [ 0.402]pmbus: normal or secure os
  3265. ready
  3266. [ 0.407]PMU: AXP81X
  3267. [ 0.409]PMU: AXP81X found
  3268. bat_vol=0, ratio=100
  3269. [ 0.414]PMU: dcdc2 900
  3270. [ 0.417]PMU: pll1 1008 Mhz
  3271. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  3272. set power on vol to default
  3273. dcdc1_vol = 3300, onoff=1
  3274. dcdc2_vol = 900, onoff=1
  3275. dcdc3_vol = 900, onoff=1
  3276. dcdc4_vol = 900, onoff=1
  3277. dcdc6_vol = 900, onoff=1
  3278. aldo1_vol = 1800, onoff=0
  3279. aldo2_vol = 1800, onoff=1
  3280. aldo3_vol = 3000, onoff=1
  3281. eldo2_vol = 1800, onoff=0
  3282. dldo1_vol = 3300, onoff=0
  3283. dldo2_vol = 3300, onoff=0
  3284. dldo3_vol = 2500, onoff=1
  3285. dldo4_vol = 2800, onoff=0
  3286. fldo2_vol = 900, onoff=1
  3287. gpio0_vol = 3300, onoff=1
  3288. gpio1_vol = 3300, onoff=1
  3289. find power_sply to end
  3290. supply=dcdc1
  3291. axp=axp81x, supply=dcdc1, vol=3300
  3292. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  3293. supply=dcdc1
  3294. axp=axp81x, supply=dcdc1, vol=3300
  3295. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  3296. supply=dldo3
  3297. axp=axp81x, supply=dldo3, vol=1800
  3298. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  3299. supply=dcdc1
  3300. axp=axp81x, supply=dcdc1, vol=3300
  3301. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  3302. supply=dcdc1
  3303. axp=axp81x, supply=dcdc1, vol=3300
  3304. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  3305. supply=dcdc1
  3306. axp=axp81x, supply=dcdc1, vol=3300
  3307. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  3308. supply=dcdc1
  3309. axp=axp81x, supply=dcdc1, vol=3300
  3310. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  3311. supply=aldo3
  3312. axp=axp81x, supply=aldo3, vol=3000
  3313. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  3314. config gpio bias voltage finish
  3315. vbus exist
  3316. no battery, limit to dc
  3317. ac100 reg 0x00 = 0x101
  3318. ac100 reg 0xd0 = 0x0
  3319. ac100 reg 0xd1 = 0x0
  3320. __446__:(board.c:power_source_init)
  3321. [AXP81X]:[00]=[35]
  3322. [AXP81X]:[01]=[10]
  3323. [AXP81X]:[02]=[02]
  3324. [AXP81X]:[03]=[51]
  3325. [AXP81X]:[04]=[00]
  3326. [AXP81X]:[05]=[00]
  3327. [AXP81X]:[06]=[00]
  3328. [AXP81X]:[07]=[00]
  3329. [AXP81X]:[08]=[00]
  3330. [AXP81X]:[09]=[00]
  3331. [AXP81X]:[0A]=[00]
  3332. [AXP81X]:[0B]=[00]
  3333. [AXP81X]:[0C]=[00]
  3334. [AXP81X]:[0D]=[00]
  3335. [AXP81X]:[0E]=[00]
  3336. [AXP81X]:[0F]=[0E]
  3337. [AXP81X]:[10]=[3F]
  3338. [AXP81X]:[11]=[00]
  3339. [AXP81X]:[12]=[20]
  3340. [AXP81X]:[13]=[C8]
  3341. [AXP81X]:[14]=[08]
  3342. [AXP81X]:[15]=[1A]
  3343. [AXP81X]:[16]=[1A]
  3344. [AXP81X]:[17]=[0B]
  3345. [AXP81X]:[18]=[15]
  3346. [AXP81X]:[19]=[00]
  3347. [AXP81X]:[1A]=[16]
  3348. [AXP81X]:[1B]=[00]
  3349. [AXP81X]:[1C]=[0B]
  3350. [AXP81X]:[1D]=[04]
  3351. [AXP81X]:[1E]=[00]
  3352. [AXP81X]:[1F]=[00]
  3353. [AXP81X]:[20]=[11]
  3354. [AXP81X]:[21]=[A8]
  3355. [AXP81X]:[22]=[A8]
  3356. [AXP81X]:[23]=[A8]
  3357. [AXP81X]:[24]=[A4]
  3358. [AXP81X]:[25]=[9E]
  3359. [AXP81X]:[26]=[A8]
  3360. [AXP81X]:[27]=[FC]
  3361. [AXP81X]:[28]=[0B]
  3362. [AXP81X]:[29]=[0B]
  3363. [AXP81X]:[2A]=[17]
  3364. [AXP81X]:[2B]=[00]
  3365. [AXP81X]:[2C]=[00]
  3366. [AXP81X]:[2D]=[B0]
  3367. [AXP81X]:[2E]=[40]
  3368. [AXP81X]:[2F]=[00]
  3369. [AXP81X]:[30]=[03]
  3370. [AXP81X]:[31]=[03]
  3371. [AXP81X]:[32]=[43]
  3372. [AXP81X]:[33]=[C8]
  3373. [AXP81X]:[34]=[45]
  3374. [AXP81X]:[35]=[83]
  3375. [AXP81X]:[36]=[59]
  3376. [AXP81X]:[37]=[00]
  3377. [AXP81X]:[38]=[A5]
  3378. [AXP81X]:[39]=[1F]
  3379. [AXP81X]:[3A]=[85]
  3380. [AXP81X]:[3B]=[08]
  3381. [AXP81X]:[3C]=[FC]
  3382. [AXP81X]:[3D]=[16]
  3383. [AXP81X]:[3E]=[7C]
  3384. BPI-M3:[AXP81X]:[3A]=[85]
  3385. limit to 2500mA
  3386. fel key old mode
  3387. run key detect
  3388. no key found
  3389. no key input
  3390. dram_para_set start
  3391. dram_para_set end
  3392. [ 0.760]DRAM: 2 GiB
  3393. relocation Offset is: 75af7000
  3394. user_gpio config
  3395. user_gpio ok
  3396. gic: normal or no secure os mode
  3397. script config pll_de to 504 Mhz
  3398. script config pll_video1 to 297 Mhz
  3399. Not Found clk pll_video in script
  3400. enable power vcc-hdmi-18, ret=0
  3401. DRV_DISP_Init end
  3402. [ 0.998]boot_disp.output_disp=1
  3403. [ 1.002]boot_disp.output_type=3
  3404. [ 1.005]boot_disp.output_mode=5
  3405. [ 1.008]fetch script data boot_disp.auto_hpd fail
  3406. disp1 device type(4) enable
  3407. attched ok, mgr1<-->device1, type=4, mode=5----
  3408. ready to set mode
  3409. workmode = 0
  3410. MMC: 0
  3411. [ 1.043][mmc]: mmc driver ver 2015-04-13 14:50:00
  3412. [ 1.048][mmc]: get sdc_phy_wipe fail.
  3413. [ 1.052][mmc]: get sdc0 sdc_erase fail.
  3414. [ 1.056][mmc]: get sdc_f_max fail,use default 50000000Hz
  3415. [ 1.061][mmc]: get sdc_ex_dly_used fail,use default dly
  3416. [ 1.067][mmc]: SUNXI SD/MMC: 0
  3417. [ 1.080][mmc]: *Try SD card 0*
  3418. [ 1.124][mmc]: CID 0x3534453 0x4c313647 0x8083562d 0x790103f3
  3419. [ 1.129][mmc]: mmc clk 50000000
  3420. [ 1.133][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
  3421. [ 1.138][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  3422. [ 1.143][mmc]: ***SD/MMC 0 init OK!!!***
  3423. [ 1.151][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  3424. [ 1.157][mmc]: secure_feature 0x0
  3425. [ 1.160][mmc]: secure_removal_type 0x0
  3426. [ 1.164]sunxi flash init ok
  3427. [ 1.172][mmc]: MMC Device 2 not found
  3428. [ 1.175][mmc]: Can not find mmc dev
  3429. [ 1.179][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  3430. sunxi_secstorage_read fail
  3431. get secure storage map err
  3432. sunxi secure storage is not supported
  3433. private partition is not exist
  3434. In: serial
  3435. Out: serial
  3436. Err: serial
  3437. --------fastboot partitions--------
  3438. -total partitions:6-
  3439. -name- -start- -size-
  3440. boot-res : 1000000 2000000
  3441. env : 3000000 1000000
  3442. boot : 4000000 1000000
  3443. rootfs : 5000000 20000000
  3444. klog : 25000000 1000000
  3445. UDISK : 26000000 0
  3446. -----------------------------------
  3447. base bootcmd=run setargs_nand boot_normal
  3448. bootcmd set setargs_mmc
  3449. key 0
  3450. recovery key high 10, low 8
  3451. cant find fstbt value
  3452. no misc partition is found
  3453. to be run cmd=run setargs_mmc boot_normal
  3454. serial is: 00000000000000000000
  3455. mount part name boot-res
  3456. cant open script.bin, maybe it is not exist
  3457. WORK_MODE_BOOT
  3458. board_status_probe
  3459. [ 1.285]pre sys mode
  3460. sunxi_bmp_logo_display
  3461. [ 1.410][mmc]: blkcnt should not be 0
  3462. [ 1.428]fetch script data boot_disp.output_disp fail
  3463. [ 1.433]screen_id =1, screen_width =1280, screen_height =720
  3464. [ 1.439]frame buffer address 46400000
  3465. [ 1.443]Hit any key to stop autoboot: 3  2  1  0
  3466. [ 4.699][mmc]: MMC Device 2 not found
  3467.  
  3468. ** Invalid boot device **
  3469. [ 4.712][mmc]: blkcnt should not be 0
  3470. Loaded environment from uEnv.txt
  3471. Running uenvcmd ...
  3472. Banaan Pi bpi-m3 chip: a83t Service: linux
  3473.  
  3474. ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
  3475. ## Booting kernel from Legacy Image at 48000000 ...
  3476. Image Name: Linux-3.4.39-BPI-M3-Kernel
  3477. Image Type: ARM Linux Kernel Image (uncompressed)
  3478. Data Size: 5717288 Bytes = 5.5 MiB
  3479. Load Address: 40008000
  3480. Entry Point: 40008000
  3481. Verifying Checksum ... OK
  3482. Loading Kernel Image ... OK
  3483. OK
  3484. [ 5.092][mmc]: MMC Device 2 not found
  3485. [ 5.096][mmc]: mmc not find,so not exit
  3486. [ 5.100]
  3487. Starting kernel ...
  3488.  
  3489. [sun8i_fixup]: From boot, get meminfo:
  3490.  
  3491. Start: 0x40000000
  3492.  
  3493. Size: 2048MB
  3494.  
  3495. ion_carveout reserve: 96m 128m
  3496.  
  3497. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  3498.  
  3499. ion_cma reserve: 120m 176m 512m
  3500.  
  3501. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  3502.  
  3503. ------sun8i_smp_init_ops----37-----
  3504.  
  3505. [ 0.000000] Booting Linux on physical CPU 0
  3506. [ 0.000000] Initializing cgroup subsys cpuset
  3507. [ 0.000000] Initializing cgroup subsys cpu
  3508. [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
  3509. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  3510. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  3511. [ 0.000000] Machine: sun8i
  3512. [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
  3513. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  3514. [ 0.000000] On node 0 totalpages: 524288
  3515. [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
  3516. [ 0.000000] Normal zone: 1404 pages used for memmap
  3517. [ 0.000000] Normal zone: 0 pages reserved
  3518. [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
  3519. [ 0.000000] HighMem zone: 3204 pages used for memmap
  3520. [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
  3521. [ 0.000000] script_init enter!
  3522. [ 0.000000] script_init exit!
  3523. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  3524. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
  3525. [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  3526. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  3527. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  3528. [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
  3529. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  3530. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  3531. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  3532. <6>[ 0.000000] allocated 4194304 bytes of page_cgroup
  3533. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  3534. [ 0.000000] Memory: 2048MB = 2048MB total
  3535. [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
  3536. [ 0.000000] Virtual kernel memory layout:
  3537. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  3538. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  3539. [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  3540. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  3541. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  3542. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  3543. [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
  3544. [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
  3545. [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
  3546. [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
  3547. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  3548. [ 0.000000] Preemptible hierarchical RCU implementation.
  3549. [ 0.000000] NR_IRQS:544
  3550. [ 0.000000] Architected local timer running at 24.00MHz.
  3551. [ 0.000000] Switching to timer-based delay loop
  3552. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  3553. [ 0.000000] Console: colour dummy device 80x30
  3554. [ 0.000000] console [tty1] enabled
  3555. [ 0.001379] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  3556. [ 0.001452] pid_max: default: 32768 minimum: 301
  3557. [ 0.001787] Mount-cache hash table entries: 512
  3558. [ 0.003132] Initializing cgroup subsys cpuacct
  3559. [ 0.003177] Initializing cgroup subsys memory
  3560. [ 0.003251] Initializing cgroup subsys devices
  3561. [ 0.003284] Initializing cgroup subsys freezer
  3562. [ 0.003317] Initializing cgroup subsys blkio
  3563. [ 0.003370] Initializing cgroup subsys perf_event
  3564. [ 0.003464] CPU: Testing write buffer coherency: ok
  3565. [ 0.003553] ftrace: allocating 27619 entries in 81 pages
  3566. [ 0.040303] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  3567. [ 0.040391] Setting up static identity map for 0x4076b5a8 - 0x4076b600
  3568. [ 0.010000] CPU1: Booted secondary processor
  3569. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  3570. [ 0.010000] CPU2: Booted secondary processor
  3571. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  3572. [ 0.010000] CPU3: Booted secondary processor
  3573. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  3574. [ 0.260089] CPU4: failed to boot: -22
  3575. [ 0.300068] CPU5: failed to boot: -22
  3576. [ 0.340070] CPU6: failed to boot: -22
  3577. [ 0.380092] CPU7: failed to boot: -22
  3578. [ 0.380308] Brought up 4 CPUs
  3579. [ 0.380333] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  3580. [ 0.380909] devtmpfs: initialized
  3581. [ 0.390052] pinctrl core: initialized pinctrl subsystem
  3582. [ 0.411162] NET: Registered protocol family 16
  3583. [ 0.434068] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  3584. [ 0.434183] script_sysfs_init success
  3585. [ 0.434238] sunxi_dump_init success
  3586. [ 0.435378] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  3587. [ 0.437206] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  3588. [ 0.437668] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  3589. [ 0.438933] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  3590. [ 0.438977] hw-breakpoint: maximum watchpoint size is 8 bytes.
  3591. [ 0.440112] [sunxi-module]: [sunxi-module.0] probe success
  3592. [ 0.440574] script config pll_video1 to 297 Mhz
  3593. [ 0.440611] script config pll_ve to 432 Mhz
  3594. [ 0.440636] Not Found clk pll_periph in script
  3595. [ 0.440664] script config pll_gpu to 432 Mhz
  3596. [ 0.440692] script config pll_hsic to 480 Mhz
  3597. [ 0.440721] script config pll_de to 504 Mhz
  3598. [ 0.440743] sunxi_default_clk_init
  3599. [ 0.440763] try to set pll6ahb1 to 200000000
  3600. [ 0.440824] try to set ahb clk source to pll6ahb1
  3601. [ 0.440849] set ahb clk source to pll6ahb1
  3602. [ 0.440873] try to set ahb1 to 200000000
  3603. [ 0.440899] try to set apb1 to 100000000
  3604. [ 0.441850] ===fe3o4==== sunxi_root_procfs_attach ret:0
  3605. [ 0.451481] bio: create slab <bio-0> at 0
  3606. [ 0.451481] [ARISC] :sunxi-arisc driver v1.70
  3607. [ 0.463577] [ARISC] :arisc version: [v0.1.25.3]
  3608. [ 0.463633] [sunxi-module]: arisc register success
  3609. [ 0.464066] sunxi_get_soc_bin: slow chip
  3610. [ 0.464514] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  3611. [ 0.010000] CPU4: Booted secondary processor
  3612. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  3613. [ 0.010000] CPU5: Booted secondary processor
  3614. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  3615. [ 0.010000] CPU6: Booted secondary processor
  3616. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  3617. [ 0.010000] CPU7: Booted secondary processor
  3618. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  3619. [ 0.491435] SCSI subsystem initialized
  3620. [ 0.491435] libata version 3.00 loaded.
  3621. [ 0.491435] usbcore: registered new interface driver usbfs
  3622. [ 0.491435] usbcore: registered new interface driver hub
  3623. [ 0.491435] usbcore: registered new device driver usb
  3624. [ 0.491435] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  3625. [ 0.491435] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  3626. [ 0.491435] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  3627. [ 0.491689] Linux video capture interface: v2.00
  3628. [ 0.500759] BPI-M3: tmp [00]
  3629. [ 0.500759] BPI-M3: set PMIC AC 4000mA
  3630. [ 0.500759] BPI-M3: set PMIC AC 4000mA
  3631. [ 0.510402] Advanced Linux Sound Architecture Driver Version 1.0.25.
  3632. [ 0.511064] Bluetooth: Core ver 2.16
  3633. [ 0.511130] NET: Registered protocol family 31
  3634. [ 0.511155] Bluetooth: HCI device and connection manager initialized
  3635. [ 0.511188] Bluetooth: HCI socket layer initialized
  3636. [ 0.511214] Bluetooth: L2CAP socket layer initialized
  3637. [ 0.511261] Bluetooth: SCO socket layer initialized
  3638. [ 0.511552] cfg80211: Calling CRDA to update world regulatory domain
  3639. [ 0.511643] Switching to clocksource arch_sys_counter
  3640. [ 0.537864] FS-Cache: Loaded
  3641. [ 0.538214] CacheFiles: Loaded
  3642. [ 0.549947] axp81x_dcdc1: Failed to create debugfs directory
  3643. [ 0.551188] NET: Registered protocol family 2
  3644. [ 0.551586] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  3645. [ 0.552366] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  3646. [ 0.554861] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  3647. [ 0.556446] TCP: Hash tables configured (established 131072 bind 65536)
  3648. [ 0.556477] TCP: reno registered
  3649. [ 0.556504] UDP hash table entries: 512 (order: 2, 16384 bytes)
  3650. [ 0.556571] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  3651. [ 0.557024] NET: Registered protocol family 1
  3652. [ 0.557476] RPC: Registered named UNIX socket transport module.
  3653. [ 0.557509] RPC: Registered udp transport module.
  3654. [ 0.557533] RPC: Registered tcp transport module.
  3655. [ 0.557557] RPC: Registered tcp NFSv4.1 backchannel transport module.
  3656. [ 0.558301] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  3657. [ 0.558491] [pm]aw_pm_init!
  3658. [ 0.558517] standby_mode = 1.
  3659. [ 0.558537] wakeup src cnt is : 2.
  3660. [ 0.558565] pmu name: pmu1_para .
  3661. [ 0.558591] pmu1_enable = 0x1.
  3662. [ 0.558611] pmux_id = 0x7.
  3663. [ 0.558633] pmu name: pmu2_para .
  3664. [ 0.558655] config_pmux_para: script_parser_fetch err.
  3665. [ 0.558680] pmu2_enable = 0x0.
  3666. [ 0.559102] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  3667. [ 0.559287] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  3668. [ 0.559326] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  3669. [ 0.559418] after inited: sys_mask config = 0xebd5.
  3670. [ 0.559446] dynamic_standby enalbe = 0x0.
  3671. [ 0.559500] sunxi_reg_init enter
  3672. [ 0.559828] lock super standby for a83!
  3673. [ 0.559861] lookup_scene_lock_name: new scene lock super_standby
  3674. [ 0.559889] scene_lock_init name=super_standby
  3675. [ 0.559916] scene_lock: super_standby, type 5, count 1
  3676. [ 0.561929] highmem bounce pool size: 64 pages
  3677. [ 0.569838] VFS: Disk quotas dquot_6.5.2
  3678. [ 0.570282] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  3679. [ 0.572451] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  3680. [ 0.573020] NFS: Registering the id_resolver key type
  3681. [ 0.573785] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  3682. [ 0.575063] NTFS driver 2.1.30 [Flags: R/W].
  3683. [ 0.575506] fuse init (API version 7.18)
  3684. [ 0.576649] ceph: loaded (mds proto 32)
  3685. [ 0.576698] msgmni has been set to 1175
  3686. [ 0.585073] alg: No test for stdrng (krng)
  3687. [ 0.668423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  3688. [ 0.668486] io scheduler noop registered
  3689. [ 0.668510] io scheduler deadline registered
  3690. [ 0.668715] io scheduler cfq registered (default)
  3691. [ 0.669241] pwm module init!
  3692. [ 0.669855] [DISP]disp_module_init
  3693. [ 0.703972] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
  3694. [ 0.719231] Console: switching to colour frame buffer device 160x45
  3695. [ 0.735374] [DISP]disp_module_init finish
  3696. [ 0.810749] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  3697. [ 0.810958] sw_uart_pm()890 - uart0 clk is already enable
  3698. [ 0.811124] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  3699. [ 1.003732] console [ttyS0] enabled
  3700. [ 1.145813] axp81x_dcdc1: Failed to create debugfs directory
  3701. [ 1.310153] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  3702. [ 1.626156] axp81x_dcdc1: Failed to create debugfs directory
  3703. [ 1.944746] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  3704. [ 2.260488] [drm] Initialized drm 1.1.0 20060810
  3705. [ 2.431578] brd: module loaded
  3706. [ 2.600869] loop: module loaded
  3707. [ 2.608649] [rf_pm]: select module num is 10
  3708. [ 2.617566] [rf_pm]: module power1 name vcc-wifi-io
  3709. [ 2.627126] [rf_pm]: failed to fetch module_power1_vol
  3710. [ 2.636970] [rf_pm]: module power2 name
  3711. [ 2.645444] [rf_pm]: failed to fetch module_power2_vol
  3712. [ 2.655315] [rf_pm]: module power3 name
  3713. [ 2.663777] [rf_pm]: failed to fetch module_power3_vol
  3714. [ 2.673579] [rf_pm]: mod has no power_switch gpio
  3715. [ 2.682902] [rf_pm]: mod has no chip_en gpio
  3716. [ 2.691685] [rf_pm]: lpo_use_apclk: ac10032k2
  3717. [ 2.700656] [rf_pm]: get power regulator failed.
  3718. [ 2.709846] [rf_pm]: enable vcc-wifi-io.
  3719. [ 2.718700] [rf_pm]: mod info power switch -1
  3720. [ 2.727500] [rf_pm]: set ac10032k2 32k out
  3721. [ 2.735972] scene_lock_init name=rf_pm
  3722. [ 2.744198] [wifi_pm]: wifi gpio init is OK !!
  3723. [ 2.752982] [rfkill]: mod has no ls_int gpio
  3724. [ 2.761492] [rfkill]: mod has no pcm_ch gpio
  3725. [ 2.770283] [rfkill]: rfkill set power 0
  3726. [ 2.790092] Loading iSCSI transport class v2.0-870.
  3727. [ 2.799621] iscsi: registered transport (tcp)
  3728. [ 2.808571] [spi]: Found 1 spi devices in config files
  3729. [ 2.817991] boards_num modalias max_spd_hz bus_num cs mode
  3730. [ 2.830121] 0 spidev 33000000 0 0 3
  3731. [ 2.842702] axp81x_dcdc1: Failed to create debugfs directory
  3732. [ 2.853134] spi spi0: master is unqueued, this is deprecated
  3733. [ 2.863584] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
  3734. [ 2.875684] [spi-0]: driver probe succeed, base f1c68000, irq 97!
  3735. [ 2.887836] usbcore: registered new interface driver qf9700
  3736. [ 2.897977] usbcore: registered new interface driver smsc95xx
  3737. [ 2.908192] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  3738. [ 2.939327] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  3739. [ 2.952059] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  3740. [ 2.965204] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  3741. [ 2.990057] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  3742. [ 3.000340] ehci_irq: highspeed device connect
  3743. [ 3.009046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  3744. [ 3.020328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3745. [ 3.032106] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  3746. [ 3.044294] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  3747. [ 3.055517] usb usb1: SerialNumber: sunxi-ehci
  3748. [ 3.064950] hub 1-0:1.0: USB hub found
  3749. [ 3.072984] hub 1-0:1.0: 1 port detected
  3750. [ 3.081591] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  3751. [ 3.112467] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  3752. [ 3.125012] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  3753. [ 3.137498] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  3754. [ 3.204134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  3755. [ 3.215816] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3756. [ 3.228016] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  3757. [ 3.240167] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  3758. [ 3.251785] usb usb2: SerialNumber: sunxi-ohci
  3759. [ 3.261542] hub 2-0:1.0: USB hub found
  3760. [ 3.269974] hub 2-0:1.0: 1 port detected
  3761. [ 3.278978] Initializing USB Mass Storage driver...
  3762. [ 3.288866] usbcore: registered new interface driver usb-storage
  3763. [ 3.299888] USB Mass Storage support registered.
  3764. [ 3.309468] usbcore: registered new interface driver ums-alauda
  3765. [ 3.320578] usbcore: registered new interface driver ums-cypress
  3766. [ 3.331723] usbcore: registered new interface driver ums-datafab
  3767. [ 3.342799] usbcore: registered new interface driver ums_eneub6250
  3768. [ 3.354029] usbcore: registered new interface driver ums-freecom
  3769. [ 3.364960] usbcore: registered new interface driver ums-isd200
  3770. [ 3.375778] usbcore: registered new interface driver ums-jumpshot
  3771. [ 3.386648] usbcore: registered new interface driver ums-karma
  3772. [ 3.397143] usbcore: registered new interface driver ums-onetouch
  3773. [ 3.400173] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  3774. [ 3.419141] usbcore: registered new interface driver ums-realtek
  3775. [ 3.429711] usbcore: registered new interface driver ums-sddr09
  3776. [ 3.440197] usbcore: registered new interface driver ums-sddr55
  3777. [ 3.450551] usbcore: registered new interface driver ums-usbat
  3778. [ 3.460769] usbcore: registered new interface driver usbserial
  3779. [ 3.470821] usbcore: registered new interface driver usbserial_generic
  3780. [ 3.481571] USB Serial support registered for generic
  3781. [ 3.560728] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  3782. [ 3.571725] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  3783. [ 3.583175] usb 1-1: Product: USB 2.0 Hub
  3784. [ 3.591742] hub 1-1:1.0: USB hub found
  3785. [ 3.599476] hub 1-1:1.0: 4 ports detected
  3786. [ 3.608404] usbserial: USB Serial Driver core
  3787. [ 3.616900] file system registered
  3788. [ 3.625911] android_usb gadget: Mass Storage Function, version: 2009/09/11
  3789. [ 3.637017] android_usb gadget: Number of LUNs=3
  3790. [ 3.645514] lun0: LUN: removable file: (no medium)
  3791. [ 3.654240] lun1: LUN: removable file: (no medium)
  3792. [ 3.662880] lun2: LUN: removable file: (no medium)
  3793. [ 3.671831] android_usb gadget: android_usb ready
  3794. [ 3.680686] axp81x_dcdc1: Failed to create debugfs directory
  3795. [ 3.690238] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  3796. [ 3.700300] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  3797. [ 3.712864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  3798. [ 3.723687] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3799. [ 3.737255] usb usb3: Product: sunxi_hcd host driver
  3800. [ 3.748273] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  3801. [ 3.761772] usb usb3: SerialNumber: sunxi_hcd_host0
  3802. [ 3.773734] hub 3-0:1.0: USB hub found
  3803. [ 3.783385] hub 3-0:1.0: 1 port detected
  3804. [ 3.794499] mousedev: PS/2 mouse device common for all mice
  3805. [ 3.804422] sunxikbd_script_init: key para not found, used default para.
  3806. [ 3.816227] sunxi_rtc_init(796): sunxi rtc device register!
  3807. [ 3.816336] keyname:ctp_para subname:ctp_power_io ,get error!
  3808. [ 3.836517] get sysconfig para erro!
  3809. [ 3.836786] rtc_gettime(333): read time 1970-1-1 1:0:12
  3810. [ 3.837204] alarm_gettime(470): get alarm time 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!