API tools faq
paste
Advertisement
Guest User

proc____last_kmsg

a guest
Oct 27th, 2014
386
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.50 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-perf-ga6edd5e (android-build@kpdm5.cbf.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Apr 16 09:33:17 PDT 2014
  4. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: QCT APQ8064 MAKO
  7. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. [ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] smem_find(137, 80): wrong size 72
  12. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  13. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  14. [ 0.000000] allocating 21626880 bytes at c227a000 (8247a000 physical) for fb
  15. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c371d000 s15680 r0 d12992 u32768
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 479747
  17. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 user_debug=31 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=rst_none gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.emmc=true androidboot.serialno=007a0076d68db4ee androidboot.bootloader=MAKOZ30d androidboot.baseband=mdm bootreason=hw_reset_or_poweron
  18. [ 0.000000] UART CONSOLE : enable
  19. [ 0.000000] kcal is 0|0|0|x
  20. [ 0.000000] kcal not calibrated yet : 120
  21. [ 0.000000] set to default : 255
  22. [ 0.000000] BOARD : LGE input rev_11
  23. [ 0.000000] BOARD : LGE matched rev_11
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1420MB = 1889MB total
  28. [ 0.000000] Memory: 1877268k/1997076k available, 58088k reserved, 1286140K highmem
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] .text : 0xc0008000 - 0xc0c47220 (12541 kB)
  36. [ 0.000000] .init : 0xc0d00000 - 0xc0e03d40 (1040 kB)
  37. [ 0.000000] .data : 0xc0e04000 - 0xc0ee7fd0 ( 912 kB)
  38. [ 0.000000] .bss : 0xc0ee7ff4 - 0xc11e1bdc (3047 kB)
  39. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. [ 0.000000] Preemptible hierarchical RCU implementation.
  41. [ 0.000000] NR_IRQS:921
  42. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  43. [ 0.000000] Console: colour dummy device 80x30
  44. [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  45. [ 0.000183] pid_max: default: 32768 minimum: 301
  46. [ 0.000427] Security Framework initialized
  47. [ 0.000457] SELinux: Initializing.
  48. [ 0.000610] Mount-cache hash table entries: 512
  49. [ 0.001831] Initializing cgroup subsys debug
  50. [ 0.001831] Initializing cgroup subsys cpuacct
  51. [ 0.001831] Initializing cgroup subsys freezer
  52. [ 0.001953] CPU: Testing write buffer coherency: ok
  53. [ 0.002227] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  54. [ 0.002258] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  55. [ 0.002350] Setting up static identity map for 0x80a1fb48 - 0x80a1fbd0
  56. [ 0.005615] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  57. [ 0.008057] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  58. [ 0.010529] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  59. [ 0.010651] Brought up 4 CPUs
  60. [ 0.010651] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  61. [ 0.025881] dummy:
  62. [ 0.026278] NET: Registered protocol family 16
  63. [ 0.027285] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  64. [ 0.029971] meminfo_init: smem ram ptable found: ver: 0 len: 6
  65. [ 0.030001] Found 2 memory banks grouped into 16 memory regions
  66. [ 0.030245] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  67. [ 0.031069] smem_find(137, 80): wrong size 72
  68. [ 0.031100] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  69. [ 0.031100] accessory_chip=0 hw_plat_subtype=1
  70. [ 0.031130] msm_rpm_init: RPM firmware 3.0.16842886
  71. [ 0.051365] msm_rpm_get_status(): Status id 433 not defined for target
  72. [ 0.051365] msm_rpm_get_status(): Status id 433 not defined for target
  73. [ 0.051396] msm_rpm_get_status(): Status id 433 not defined for target
  74. [ 0.051396] msm_rpm_get_status(): Status id 433 not defined for target
  75. [ 0.051426] msm_rpm_get_status(): Status id 433 not defined for target
  76. [ 0.051426] msm_rpm_get_status(): Status id 433 not defined for target
  77. [ 0.051426] msm_rpm_get_status(): Status id 433 not defined for target
  78. [ 0.051457] msm_rpm_get_status(): Status id 433 not defined for target
  79. [ 0.069800] pm8921_probe: PMIC revision 1: F4
  80. [ 0.069830] pm8921_probe: PMIC revision 2: 06
  81. [ 0.069830] pm8921_probe: PMIC version: PM8921 rev 3.0
  82. [ 0.069861] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  83. [ 0.071051] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  84. [ 0.071570] pm_gpio_probe: OK: base=152, ngpio=44
  85. [ 0.071844] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  86. [ 0.071936] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  87. [ 0.074011] pm8821_probe: PMIC revision 1: PM8821 rev F3
  88. [ 0.074042] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  89. [ 0.074042] pm8821_probe: PMIC version: PM8821 ver 2.1
  90. [ 0.074652] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  91. [ 0.074683] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  92. [ 0.075232] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  93. [ 0.076545] saw_probe: id=0, name=8921_s5
  94. [ 0.076880] saw_probe: id=1, name=8921_s6
  95. [ 0.077247] saw_probe: id=2, name=8821_s0
  96. [ 0.077613] saw_probe: id=3, name=8821_s1
  97. [ 0.086616] persistent_ram: error in header, 1
  98. [ 0.086616] persistent_ram: found existing buffer, size 36687, start 36687
  99. [ 0.210376] console [ram-1] enabled
  100. [ 0.211811] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  101. [ 0.211963] [DEBUG] uart_enable : 1
  102. [ 0.214558] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  103. [ 0.215779] ------------[ cut here ]------------
  104. [ 0.215901] WARNING: at arch/arm/mach-msm/subsystem_restart.c:617 subsys_restart_init+0xd8/0x108()
  105. [ 0.216084] [<c0013ce0>] (unwind_backtrace+0x0/0xe0) from [<c006c800>] (warn_slowpath_common+0x48/0x60)
  106. [ 0.216267] [<c006c800>] (warn_slowpath_common+0x48/0x60) from [<c006c8d0>] (warn_slowpath_null+0x18/0x1c)
  107. [ 0.216358] [<c006c8d0>] (warn_slowpath_null+0x18/0x1c) from [<c0d0b244>] (subsys_restart_init+0xd8/0x108)
  108. [ 0.216542] [<c0d0b244>] (subsys_restart_init+0xd8/0x108) from [<c0d009d0>] (do_one_initcall+0x90/0x160)
  109. [ 0.216725] [<c0d009d0>] (do_one_initcall+0x90/0x160) from [<c0d00b88>] (kernel_init+0xe8/0x1a4)
  110. [ 0.216908] [<c0d00b88>] (kernel_init+0xe8/0x1a4) from [<c000ee8c>] (kernel_thread_exit+0x0/0x8)
  111. [ 0.217091] ---[ end trace eb792ce40d88f5a7 ]---
  112. [ 0.219594] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  113. [ 0.219746] sps:BAM 0x12244000 is registered.
  114. [ 0.220296] sps:sps is ready.
  115. [ 0.250175] bio: create slab <bio-0> at 0
  116. [ 0.251030] ION heap vmalloc created
  117. [ 0.251152] ION heap mm created at a0000000 with size 5c00000
  118. [ 0.251335] ION heap mm_fw created at 9fe00000 with size 1e0000
  119. [ 0.251457] ION heap mfc created at a5c00000 with size 2000
  120. [ 0.251640] ION heap iommu created
  121. [ 0.251793] ION heap qsecom created at fea07000 with size 780000
  122. [ 0.251915] ION heap audio created at ff187000 with size 4cf000
  123. [ 0.253288] pm8xxx_pwm_probe: OK
  124. [ 0.254021] SCSI subsystem initialized
  125. [ 0.254417] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  126. [ 0.254570] sps:BAM 0x28084000 is registered.
  127. [ 0.255424] usbcore: registered new interface driver usbfs
  128. [ 0.255730] usbcore: registered new interface driver hub
  129. [ 0.255943] usbcore: registered new device driver usb
  130. [ 0.256401] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  131. [ 0.257378] Linux media interface: v0.10
  132. [ 0.257530] Linux video capture interface: v2.00
  133. [ 0.259789] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  134. [ 0.260064] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  135. [ 0.260338] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  136. [ 0.260582] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  137. [ 0.260888] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  138. [ 0.261162] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  139. [ 0.261376] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  140. [ 0.261651] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  141. [ 0.261895] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  142. [ 0.262169] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  143. [ 0.262444] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  144. [ 0.262658] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  145. [ 0.263207] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  146. [ 0.263512] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  147. [ 0.263787] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  148. [ 0.264092] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  149. [ 0.264336] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  150. [ 0.264672] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  151. [ 0.265008] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  152. [ 0.265222] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  153. [ 0.265557] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  154. [ 0.265771] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  155. [ 0.266229] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  156. [ 0.266687] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  157. [ 0.267022] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  158. [ 0.267480] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  159. [ 0.267968] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  160. [ 0.268365] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  161. [ 0.268884] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  162. [ 0.269220] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  163. [ 0.269647] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  164. [ 0.270166] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  165. [ 0.270532] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  166. [ 0.270990] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  167. [ 0.271326] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  168. [ 0.271722] Advanced Linux Sound Architecture Driver Version 1.0.25.
  169. [ 0.272821] Bluetooth: Core ver 2.16
  170. [ 0.273065] NET: Registered protocol family 31
  171. [ 0.273187] Bluetooth: HCI device and connection manager initialized
  172. [ 0.273462] Bluetooth: HCI socket layer initialized
  173. [ 0.273584] Bluetooth: L2CAP socket layer initialized
  174. [ 0.274133] Bluetooth: SCO socket layer initialized
  175. [ 0.274835] cfg80211: Calling CRDA to update world regulatory domain
  176. [ 0.275110] cfg80211: World regulatory domain updated:
  177. [ 0.275263] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  178. [ 0.275507] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  179. [ 0.275598] earjack debugger probed
  180. [ 0.275904] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  181. [ 0.276148] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  182. [ 0.276270] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  183. [ 0.276514] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  184. [ 0.276972] Switching to clocksource gp_timer
  185. [ 0.329833] NET: Registered protocol family 2
  186. [ 0.330352] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  187. [ 0.331481] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  188. [ 0.333801] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  189. [ 0.335052] TCP: Hash tables configured (established 131072 bind 65536)
  190. [ 0.335296] TCP: reno registered
  191. [ 0.335449] UDP hash table entries: 512 (order: 2, 16384 bytes)
  192. [ 0.335724] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  193. [ 0.336365] NET: Registered protocol family 1
  194. [ 0.337066] Trying to unpack rootfs image as initramfs...
  195. [ 0.389470] Freeing initrd memory: 484K
  196. [ 0.391728] Detected 5 counters on the L2CC PMU.
  197. [ 0.394048] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  198. [ 0.396032] pil_riva pil_riva: using secure boot
  199. [ 0.399694] pil_dsps pil_dsps: using secure boot
  200. [ 0.401403] pil_gss pil_gss: using secure boot
  201. [ 0.403906] smd_channel_probe_worker: allocation table not initialized
  202. [ 0.409888] msm_dsps driver version 4.03.
  203. [ 0.411414] NET: Registered protocol family 27
  204. [ 0.414405] lpass_fatal_init: lpass SSR driver init'ed.
  205. [ 0.414649] wcnss_8960: module initialized
  206. [ 0.415107] gss_8064_init: gss fatal driver init'ed.
  207. [ 0.415717] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  208. [ 0.415901] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
  209. [ 0.418495] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
  210. [ 0.418678] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
  211. [ 0.418770] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
  212. [ 0.418922] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
  213. [ 0.419563] kcal_ctrl_init
  214. [ 0.420143] persistent_ram: no valid data in buffer (sig = 0x4e4f524d)
  215. [ 0.421303] msm_rpm_log_probe: OK
  216. [ 0.424599] mdm_modem_probe: registered mdm id 0
  217. [ 0.424935] mdm_do_first_power_on:id 0: Powering on modem for the first time
  218. [ 0.425240] mdm_pblrdy_change: mdm id 0: pbl ready:0
  219. [ 0.459697] mdm_pblrdy_change: mdm id 0: pbl ready:1
  220. [ 0.668426] usbcore: registered new interface driver hsic_sysmon
  221. [ 0.669311] audit: initializing netlink socket (disabled)
  222. [ 0.669555] type=2000 audit(0.650:1): initialized
  223. [ 0.672150] highmem bounce pool size: 64 pages
  224. [ 0.691225] fuse init (API version 7.18)
  225. [ 0.691988] msgmni has been set to 1155
  226. [ 0.697298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  227. [ 0.697543] io scheduler noop registered
  228. [ 0.697878] io scheduler deadline registered
  229. [ 0.698428] io scheduler cfq registered (default)
  230. [ 0.699587] lm3530 probed
  231. [ 0.703403] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  232. [ 0.703616] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00f8000
  233. [ 0.704990] mipi_lgit_lcd_probe start
  234. [ 0.705203] setting pdata->panel_info.fb_num to 3. type: 8
  235. [ 0.717717] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  236. [ 0.717991] load_565rle_image: Can not open /initlogo.rle
  237. [ 0.719853] setting pdata->panel_info.fb_num to 1. type: 7
  238. [ 0.720952] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  239. [ 0.721257] load_565rle_image: Can not open /initlogo.rle
  240. [ 0.721776] mdp4_dtv_vsync_init: ndx=0
  241. [ 0.722081] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf964408
  242. [ 0.722203] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  243. [ 0.723027] setting pdata->panel_info.fb_num to 1. type: 10
  244. [ 0.723393] Inside writeback_driver_init
  245. [ 0.723760] Inside writeback_probe
  246. [ 0.724523] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  247. [ 0.724828] load_565rle_image: Can not open /initlogo.rle
  248. [ 0.726476]
  249. [ 0.726476] msm_vidc_enc: Inside vid_enc_init()
  250. [ 0.726964]
  251. [ 0.726964] msm_vidc_enc: Inside vid_enc_vcd_init()
  252. [ 0.727941] smux_init: unable to create log context
  253. [ 0.728857] msm_serial_hs module loaded
  254. [ 0.729192] msm_serial_hsl: detected port #0
  255. [ 0.729497] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  256. [ 0.729681] msm_serial_hsl: console setup on port #0
  257. [ 0.730047] console [ttyHSL0] enabled
  258. [ 0.730413] msm_serial_hsl: driver initialized
  259. [ 0.732031] msm_rotator_probe: rotator_hw_revision=2
  260. [ 0.735724] diagchar initialized now
  261. [ 0.737402] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  262. [ 0.748115] brd: module loaded
  263. [ 0.752235] loop: module loaded
  264. [ 0.754097] anx7808 init gpio
  265. [ 0.787578] anx7808 dvdd is already on
  266. [ 0.817640] sp_tx_hardware_poweron: anx7808 power on
  267. [ 0.818586] sp_tx_chip_located: ANX7808 BA is found.
  268. [ 0.820021] sp_tx_vbus_powerdown: 3.3V output disabled
  269. [ 0.877582] sp_tx_hardware_powerdown: anx7808 power down
  270. [ 0.877735] sp_tx_set_sys_state: SP_TX To System State:
  271. [ 0.877857] sp_tx_set_sys_state: STATE_CABLE_PLUG
  272. [ 0.878528] tabla2x-slim tabla2x-slim: Platform data from board file
  273. [ 0.944483] wcd9xxx_check_codec_type: codec is tabla_codec
  274. [ 0.944666] wcd9xxx_check_codec_type: Read codec idbytes & version
  275. [ 0.944666] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  276. [ 0.944666] byte_3[00000001] version = 2
  277. [ 0.945978] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  278. [ 0.946131] i2c-core: driver [tabla-i2c-core] using legacy resume method
  279. [ 0.946986] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  280. [ 0.947291] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  281. [ 0.947474] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  282. [ 0.948206] SCSI Media Changer driver v0.25
  283. [ 0.949275] tun: Universal TUN/TAP device driver, 1.6
  284. [ 0.949458] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  285. [ 0.949641] rmnet_init: BAM devices[8]
  286. [ 0.964077] PPP generic driver version 2.4.2
  287. [ 0.964321] PPP BSD Compression module registered
  288. [ 0.964474] PPP Deflate Compression module registered
  289. [ 0.965145] PPP MPPE Compression module registered
  290. [ 0.965328] NET: Registered protocol family 24
  291. [ 0.965725] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  292. [ 0.966061] CSLIP: code copyright 1989 Regents of the University of California.
  293. [ 0.966427] wcnss_wlan probed in built-in mode
  294. [ 0.968258] usbcore: registered new interface driver asix
  295. [ 0.968533] usbcore: registered new interface driver cdc_ether
  296. [ 0.968930] usbcore: registered new interface driver net1080
  297. [ 0.969235] usbcore: registered new interface driver cdc_subset
  298. [ 0.969632] usbcore: registered new interface driver zaurus
  299. [ 0.970151] usbcore: registered new interface driver cdc_ncm
  300. [ 0.970639] msm_otg msm_otg: msm_otg probe
  301. [ 0.970883] msm_otg msm_otg: failed to get phy_clk
  302. [ 0.971158] msm_otg msm_otg: OTG regs = f01f2000
  303. [ 0.974546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  304. [ 0.987822] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  305. [ 0.988036] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  306. [ 1.017701] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  307. [ 1.037692] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  308. [ 1.038119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  309. [ 1.038303] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  310. [ 1.038394] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  311. [ 1.038577] usb usb1: Manufacturer: Linux 3.4.0-perf-ga6edd5e ehci_hcd
  312. [ 1.038669] usb usb1: SerialNumber: msm_hsic_host
  313. [ 1.039279] hub 1-0:1.0: USB hub found
  314. [ 1.039432] hub 1-0:1.0: 1 port detected
  315. [ 1.040714] usbcore: registered new interface driver cdc_acm
  316. [ 1.040897] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  317. [ 1.041049] Initializing USB Mass Storage driver...
  318. [ 1.041233] usbcore: registered new interface driver usb-storage
  319. [ 1.041385] USB Mass Storage support registered.
  320. [ 1.041538] usbcore: registered new interface driver ums-alauda
  321. [ 1.041751] usbcore: registered new interface driver ums-cypress
  322. [ 1.041904] usbcore: registered new interface driver ums-datafab
  323. [ 1.042118] usbcore: registered new interface driver ums-freecom
  324. [ 1.042240] usbcore: registered new interface driver ums-isd200
  325. [ 1.042453] usbcore: registered new interface driver ums-jumpshot
  326. [ 1.042606] usbcore: registered new interface driver ums-karma
  327. [ 1.042820] usbcore: registered new interface driver ums-onetouch
  328. [ 1.042972] usbcore: registered new interface driver ums-sddr09
  329. [ 1.043216] usbcore: registered new interface driver ums-sddr55
  330. [ 1.043338] usbcore: registered new interface driver ums-usbat
  331. [ 1.043644] usbcore: registered new interface driver usbserial
  332. [ 1.043735] usbserial: USB Serial Driver core
  333. [ 1.043949] usbcore: registered new interface driver qc_csvt
  334. [ 1.044071] USB Serial support registered for qc_csvt
  335. [ 1.044315] usbcore: registered new interface driver usb_ehset_test
  336. [ 1.044468] usbcore: registered new interface driver diag_bridge
  337. [ 1.044895] usbcore: registered new interface driver mdm_bridge
  338. [ 1.045780] usbcore: registered new interface driver ks_bridge
  339. [ 1.045963] ksb_init: init done
  340. [ 1.046329] msm_otg msm_otg: phy_reset: success
  341. [ 1.047123] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  342. [ 1.047520] mbim_init: initialize 1 instances
  343. [ 1.047764] mbim_init: Initialized 1 ports
  344. [ 1.049900] rndis_qc_init: initialize rndis QC instance
  345. [ 1.050419] android_usb gadget: Mass Storage Function, version: 2009/09/11
  346. [ 1.050572] android_usb gadget: Number of LUNs=1
  347. [ 1.050663] lun0: LUN: removable file: (no medium)
  348. [ 1.051213] android_usb gadget: android_usb ready
  349. [ 1.052769] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  350. [ 1.053715] [Touch D]touch enable
  351. [ 1.257927] input: touch_dev as /devices/virtual/input/input2
  352. [ 1.280054] [Touch] common[1] finger[17] flash[52] button[0]
  353. [ 1.281184] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E008.
  354. [ 1.283290] [Touch] fw_rev[0:0] product_id[PLG224:PLG224] force_upgrade[0]
  355. [ 1.283351] [Touch] Touch driver is initialized
  356. [ 1.283961] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  357. [ 1.284846] using rtc device, pm8xxx_rtc, for alarms
  358. [ 1.285029] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  359. [ 1.285609] i2c /dev entries driver
  360. [ 1.286250] usbcore: registered new interface driver uvcvideo
  361. [ 1.286342] USB Video Class driver (1.1.1)
  362. [ 1.287746] __jrchoi: msm_sensor_init_module: E
  363. [ 1.316007] msm_eeprom_probe probe_fail
  364. [ 1.316465] msm_server_update_sensor_info mctl_node_name[0] = video1
  365. [ 1.345338] msm_eeprom_probe probe_fail
  366. [ 1.345795] msm_server_update_sensor_info mctl_node_name[1] = video3
  367. [ 1.349885] msm_cam_server_request_irq IRQ Router hw is not present.
  368. [ 1.350618] lm3559_init
  369. [ 1.377262] pm8xxx_tm_probe: OK
  370. [ 1.377903] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  371. [ 1.378452] pm8xxx_tm_probe: OK
  372. [ 1.380436] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  373. [ 1.38q504] cpuidle: using gover�or ladder
  374. [ �.381840] cpuidle: usifg governo� menu
  375. � 1.38"633] mmc0: SDCCVersion: 0x0000001a
  376. [ 1.384617] mmc0: bam physical base=0x12402000
  377. [ 1.384709] mmc0: bam virtual base=0xf0334000
  378. [ 1.384800] sps:BAM 0x12402000 is registered.
  379. [ 1.384983] mmc0: BAM device registered. bam_handle=0xef01ca00
  380. [ 1.385319] sps:BAM 0x12402000 enabled: ver:0x5, npmber of pipes:6[ 1.385899] mmc0: Qualcomm MS� SDCC-BAM at 0x000000001240�00p irq 130
  381. �` 1�86113] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  382. [ 1.386326] mmc0: No card detect facilities available
  383. [ 1.388188] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  384. [ 1.388371] mmc0: Controller capabilities: 0x0000039e
  385. [ 1.388463] mmc0: 8 bit data mode enabled
  386. [ 1.388615] mmc0: 4 bit data mode disabled
  387. [ 1.388707] mmc0: polling status mode disabled
  388. [ 1.388921] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  389. [ 1.389012] mmc0: Slot eject status = 0
  390. [ 1.389104] mmc0: Power save feature enable = 1
  391. [ 1.389256] mmc0: SPS-BAM data transfer mode available
  392. [ 1.389989] usbcore: registered new interface driver usbhid
  393. [ 1.390202] usbhid: USB HID core driver
  394. [ 1.391057] ashmem: initialized
  395. [ 1.391271] logger: created 256K log 'log_main'
  396. [ 1.391545] logger: created 256K log 'log_events'
  397. [ 1.391759] logger: created 256K log 'log_radio'
  398. [ 1.392034] logger: created 256K log 'log_system'
  399. [ 1.392797] usbcore: registered new interface driver snd-usb-audio
  400. [ 1.394506] tabla_probe
  401. [ 1.395360] amp_enable: amp enable bypass(2)
  402. [ 1.395482] amp_enable: AMP_EN is set to 0
  403. [ 1.396612] msm_pcm_probe: dev name msm-voip-dsp
  404. [ 1.397100] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture Sdline 0
  405. [ 1397283] msm-dai-q6-mi2c msm%dai-�6-mi2s: msm_dai_a6_Mi2s_platfkrm_data_validation: playback ch_max 0 capture ch_mx 8
  406. [ 1.398718] msm_pcm_probe: dev name msm-pcm-dsp
  407. [ 1.399175] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  408. [ 1.399664] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  409. [ 1.399755] adding pm_qos request in low latency driver
  410. [ 1.399938] done adding pm_qos request in low latency driver
  411. [ 1.401037] msm_compr_probe: dev name msm-compr-dsp
  412. [ 1.401861] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  413. [ 1.403021] msm8930_audio_init: Not the right machine type
  414. [ 1.403204] msm_audio_init: Not the right machine type
  415. [ 1.403296] msm_audio_init: Not APQ8064 in I2S mode
  416. [ 1.444620] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  417. [ 1.444834] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  418. [ 1.445170] usb 1-1: Product: QHSUSB__BULK
  419. [ 1.445353] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  420. [ 1.522234] mmc0: new HS200 MMC card at address 0001
  421. [ 1.523699] mmcblk0: mmc0:0001 016G92 14.6 GiB
  422. [ 1.529589] Alternate GPT is invalid, using primary GPT.
  423. [ 1.530047] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  424. [ 1.535632] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  425. [ 1.536456] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  426. [ 1.537341] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  427. [ 1.538287] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  428. [ 1.539081] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  429. [ 1.539874] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  430. [ 1.540851] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  431. [ 1.541675] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  432. [ 1.542591] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  433. [ 1.543415] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  434. [ 1.544513] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  435. [ 1.545887] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  436. [ 1.547138] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  437. [ 1.548634] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  438. [ 1.549793] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  439. [ 1.552021] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  440. [ 1.558370] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  441. [ 1.559468] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  442. [ 1.560445] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  443. [ 1.561605] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  444. [ 1.562551] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  445. [ 1.563711] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  446. [ 1.564748] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  447. [ 1.565878] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  448. [ 1.566763] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  449. [ 1.567862] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  450. [ 1.568869] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  451. [ 1.569693] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  452. [ 1.570853] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  453. [ 1.571829] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  454. [ 1.573081] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  455. [ 1.573966] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  456. [ 1.575125] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  457. [ 1.576072] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  458. [ 1.577262] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  459. [ 1.578361] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  460. [ 1.579490] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  461. [ 1.583854] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  462. [ 1.584770] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  463. [ 1.591759] u32 classifier
  464. [ 1.591973] Actions configured
  465. [ 1.592308] Netfilter messages via NETLINK v0.30.
  466. [ 1.592644] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  467. [ 1.594567] ctnetlink v0.93: registering with nfnetlink.
  468. [ 1.594842] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  469. [ 1.595208] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  470. [ 1.596032] xt_time: kernel timezone is -0000
  471. [ 1.597405] ip_tables: (C) 2000-2006 Netfilter Core Team
  472. [ 1.598351] arp_tables: (C) 2002 David S. Miller
  473. [ 1.598687] TCP: cubic registered
  474. [ 1.599023] Initializing XFRM netlink socket
  475. [ 1.600549] NET: Registered protocol family 10
  476. [ 1.608515] Mobile IPv6
  477. [ 1.608789] ip6_tables: (C) 2000-2006 Netfilter Core Team
  478. [ 1.609461] IPv6 over IPv4 tunneling driver
  479. [ 1.611109] NET: Registered protocol family 17
  480. [ 1.611384] NET: Registered protocol family 15
  481. [ 1.611841] Bluetooth: RFCOMM TTY layer initialized
  482. [ 1.612238] Bluetooth: RFCOMM socket layer initialized
  483. [ 1.612421] Bluetooth: RFCOMM ver 1.11
  484. [ 1.612757] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  485. [ 1.612940] Bluetooth: BNEP filters: protocol multicast
  486. [ 1.613306] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  487. [ 1.613581] L2TP core driver, V2.0
  488. [ 1.613795] PPPoL2TP kernel driver, V2.0
  489. [ 1.615931] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  490. [ 1.616358] Registering SWP/SWPB emulation handler
  491. [ 1.616694] clock_late_init: Removing enables held for handed-off clocks
  492. [ 1.627987] MSM Watchdog Initialized
  493. [ 1.638394] registered taskstats version 1
  494. [ 1.638943] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-02 00:07:28 UTC (86848)
  495. [ 1.639890] read_ocv_trim: program rev reg is 0x52
  496. [ 1.639951] read_ocv_trim: trim reg is 0x48
  497. [ 1.640073] read_ocv_trim: trim delta is 1
  498. [ 1.640164] pm8921_is_usb_chg_plugged_in: called before init
  499. [ 1.642423] pm8921_is_usb_chg_plugged_in: called before init
  500. [ 1.643613] pm8921_is_usb_chg_plugged_in: called before init
  501. [ 1.643735] ocv_ir_compensation: comp ocv = 3775211, ocv = 3768335, ibatt_ua = 31400, rbatt_mohm = 219
  502. [ 1.643949] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  503. [ 1.644071] pm8921_is_batfet_closed: called before init
  504. [ 1.667907] pm8921_is_usb_chg_plugged_in: called before init
  505. [ 1.668029] adjust_soc: ibat_ua = 364800, vbat_uv = 3574921, soc = 31, batt_temp=343
  506. [ 1.670654] pm8921_get_batt_state: called before init
  507. [ 1.670746] pm8921_bms_probe: OK battery_capacity_at_boot=31 volt = 3579948 ocv = 3777635
  508. [ 1.671783] power_supply usb: driver failed to report `present' property: 4294967274
  509. [ 1.671875] power_supply usb: driver failed to report `present' property: 4294967274
  510. [ 1.672058] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  511. [ 1.672211] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  512. [ 1.673523] pm8921_get_batt_state: called before init
  513. [ 1.675782] pm8921_get_batt_state: called before init
  514. [ 1.681428] wlc: bq51051b_wlc_probe: probe
  515. [ 1.681489] wlc: bq51051b_wlc_hw_init: hw_init
  516. [ 1.681764] power_supply wireless: driver failed to report `present' property: 4294967274
  517. [ 1.682099] [Touch] CHARGER = 1
  518. [ 1.682191] batt_temp_ctrl_init
  519. [ 1.682343] batt_temp_ctrl_probe
  520. [ 1.683015] android_vibrator: default amplitude 88
  521. [ 1.683137] android vibrator probed
  522. [ 1.683351] fsa8008 init
  523. [ 1.683595] fsa8008 probe
  524. [ 1.684236] input: hs_detect as /devices/virtual/input/input5
  525. [ 1.684480] ALSA device list:
  526. [ 1.684541] #0: apq8064-tabla-snd-card
  527. [ 1.685426] Freeing init memory: 1036K
  528. [ 1.808423] msm_otg msm_otg: Avail curr from USB = 500
  529. [ 1.808789] msm_otg msm_otg: current: 0 -> 500 (mA)
  530. [ 1.808850] pm_power_set_property_usb: usb_target_ma 0
  531. [ 1.812147] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  532. [ 1.934381]`type=��03 audit(8684�&�80:2): policy l�aded auid=4294y67295 ses=429496'295
  533. [ 1.934494] SELinux: Lo�ded policy from�/sepolicy
  534. [ 1.937494] type=1404 audit(86848.780:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  535. [ 1.958034] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA
  536. [ 4.504013] init: could not import file 'init.mako_svelte.rc' from '/init.mako.rc'
  537. [ 4.504288] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  538. [ 4.853715] keychord: using input dev pmic8xxx_pwrkey for fevent
  539. [ 4.853837] keychord: using input dev keypad_8064 for fevent
  540. [ 4.854326] init: cannot open '/initlogo.rle'
  541. [ 4.999450] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  542. [ 5.004822] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  543. [ 5.088661] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
  544. [ 5.119609] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  545. [ 5.119731] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 15/35840 files, 4621/143360 blocks
  546. [ 5.134075] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  547. [ 5.288417] EXT4-fs (mmcblk0p23): recovery complete
  548. [ 5.289241] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  549. [ 5.368899] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  550. [ 5.380772] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  551. [ 5.380833] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 89/863264 files, 96970/3449600 blocks
  552. [ 5.385869] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
  553. [ 5.404059] EXT4-fs (mmcblk0p20): recovery complete
  554. [ 5.404822] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
  555. [ 5.404974] SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
  556. [ 5.412940] adsp_boot_store:going to call adsp_loader_do
  557. [ 5.699679] pil pil0: q6: Brought out of reset
  558. [ 5.731970] apr_tal:Q6 Is Up
  559. [ 5.748969] diag: proc 1, msg mask update fail -12, tried 419
  560. [ 5.809308] adsp_loader_do: Q6/ADSP image is loaded
  561. [ 5.833633] wcnss_wlan triggered by userspace
  562. [ 5.921959] resout_irq_handler PMIC Initiated shutdown
  563. [ 5.922081] PMIC Initiated shutdown cpu_power_off cpu=0
  564. [ 5.922081] PMIC Initiated shutdown cpu_power_off cpu=1
  565. [ 5.922081] PMIC Initiated shutdown cpu_power_off cpu=2
  566. [ 5.922112] PMIC Initiated shutdown cpu_power_off cpu=3
  567. [ 5.922386] Powering off the SoC
  568. [ 5.922478] Calling scm to disable arbiter
  569. [ 5.971829] SCM returned even when asked to busy loop rc=0
  570. [ 5.971921] waiting on pmic to shut msm down
  571.  
  572. 444 Corrected bytes, 4 unrecoverable blocks
  573. Boot info:
  574. Last boot reason: fastboot
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!