[    0.000000@0] Booting Linux on physical CPU 0x200
[    0.000000@0] Linux version 3.10.33 (kszaq@FPGAWorker) (gcc version 4.9.2 (GCC) ) #1 SMP Tue Jun 23 23:17:20 CEST 2015
[    0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[    0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000@0] Machine: Amlogic Meson8B, model: AMLOGIC
[    0.000000@0] physical memory start address is 0x200000
[    0.000000@0] reserved_end is dffffff
[    0.000000@0]
[    0.000000@0] Total memory is 1022 MiB
[    0.000000@0] Reserved low memory from 0x06000000 to 0x0dffffff, size: 128 MiB
[    0.000000@0] 	mesonfb0(low)   	: 0x06100000 - 0x07900000 ( 24 MiB)
[    0.000000@0] 	mesonfb1(low)   	: 0x07900000 - 0x07a00000 (  1 MiB)
[    0.000000@0] 	deinterlace0(high)   	: 0x3df00000 - 0x40000000 ( 33 MiB)
[    0.000000@0] 	mesonstream0(low)   	: 0x07a00000 - 0x09a00000 ( 32 MiB)
[    0.000000@0] 	vdec0(low)   	: 0x09a00000 - 0x0da00000 ( 64 MiB)
[    0.000000@0] 	ppmgr0(high)   	: 0x3cf00000 - 0x3df00000 ( 16 MiB)
[    0.000000@0] 	amvideocap0(low)   	: 0x0da00000 - 0x0e000000 (  6 MiB)
[    0.000000@0] get storage device: storage 1
[    0.000000@0] value=1
[    0.000000@0] get_storage_device : get storage device: storage 1
[    0.000000@0] get_storage_device : value=1
[    0.000000@0] [get_storage_device] storage_flag=1
[    0.000000@0] [get_storage_device] the storage device does NOT relate to eMMC, storage_flag=1
[    0.000000@0] Memory policy: ECC disabled, Data cache writealloc
[    0.000000@0] On node 0 totalpages: 212736
[    0.000000@0] free_area_init_node: node 0, pgdat c0839f00, node_mem_map c0a7e000
[    0.000000@0]   Normal zone: 1520 pages used for memmap
[    0.000000@0]   Normal zone: 0 pages reserved
[    0.000000@0]   Normal zone: 158208 pages, LIFO batch:31
[    0.000000@0]   HighMem zone: 426 pages used for memmap
[    0.000000@0]   HighMem zone: 54528 pages, LIFO batch:15
[    0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
[    0.000000@0] PERCPU: Embedded 7 pages/cpu @c1228000 s7680 r8192 d12800 u32768
[    0.000000@0] pcpu-alloc: s7680 r8192 d12800 u32768 alloc=8*4096
[    0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 211216
[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 no_console_suspend storage=1 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full hdmimode=720p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= boot=/dev/system disk=/dev/data BOOT_IMAGE=/dev/boot console=tty0 consoleblank=0 scaling_governor=ondemand scaling_min_freq=96000 scaling_max_freq=1536000 systemd.show_status=auto hdmitx=cecf
[    0.000000@0] cvbs performance line = 0
[    0.000000@0] cvbs trimming line = 0xa000
[    0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
[    0.000000@0] osd1:1
[    0.000000@0] loaded:268435459
[    0.000000@0] logo has been loaded
[    0.000000@0] 720p:11
[    0.000000@0] full:2
[    0.000000@0] kernel get hdmimode form uboot is 720p
[    0.000000@0] kernel get cvbsmode form uboot is 576cvbs
[    0.000000@0] hdmitx: cec: Function List: enable, one touch play, one touch standby, auto power by tv
[    0.000000@0] hdmitx: cec: HDMI aml_read_reg32(P_AO_DEBUG_REG0):0xf
[    0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0xf
[    0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000@0] Memory: 64MB 16MB 751MB = 831MB total
[    0.000000@0] Memory: 827996k/827996k available, 22948k reserved, 218112K highmem
[    0.000000@0] Virtual kernel memory layout:
[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000@0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000@0]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000@0]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000@0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000@0]       .text : 0xc0008000 - 0xc07a4f8c   (7796 kB)
[    0.000000@0]       .init : 0xc07a5000 - 0xc07dae00   ( 216 kB)
[    0.000000@0]       .data : 0xc07dc000 - 0xc083ad58   ( 380 kB)
[    0.000000@0]        .bss : 0xc083ad58 - 0xc0a79ae4   (2300 kB)
[    0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0] Hierarchical RCU implementation.
[    0.000000@0] 	RCU debugfs-based tracing is enabled.
[    0.000000@0] NR_IRQS:256
[    0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000@0] Global timer: MESON TIMER-F (c07f6040) initialized
[    0.000000@0] Switching to timer-based delay loop
[    0.000000@0] Console: colour dummy device 80x30
[    0.000000@0] console [tty0] enabled
[    0.000000@0] meson_serial_console_setup
[    0.000000@0] console [ttyS0] enabled
[    0.389920@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.400211@0] pid_max: default: 32768 minimum: 301
[    0.405222@0] Mount-cache hash table entries: 512
[    0.410946@0] CPU: Testing write buffer coherency: ok
[    0.415087@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.420592@0] Setting up static identity map for 0xc059bcc0 - 0xc059bd18
[    0.427250@0] L310 cache controller enabled
[    0.431318@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9,  Cache size: 524288 B
[    0.438716@0]       AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL  0x00000000
[    0.446864@0]       TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
[    0.454058@1] CPU1: Booted secondary processor
[    0.454079@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.454518@2] CPU2: Booted secondary processor
[    0.454541@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.454966@3] CPU3: Booted secondary processor
[    0.454989@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
[    0.455096@0] Brought up 4 CPUs
[    0.486877@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
[    0.493101@0] CPU: All CPU(s) started in SVC mode.
[    0.498651@0] devtmpfs: initialized
[    0.510332@0] clkrate [ xtal 	] : 24000000
[    0.510385@0] clkrate [ pll_sys 	] : 792000000
[    0.513231@0] clkrate [ pll_fixed 	] : 2550000000
[    0.517905@0] clkrate [ pll_vid 	] : 366000000
[    0.522334@0] clkrate [ pll_ddr 	] : 0
[    0.526045@0] clkrate [ a9_clk 	] : 792000000
[    0.530386@0] clkrate [ clk81 	] : 159375000
[    0.535740@0] pinctrl core: initialized pinctrl subsystem
[    0.540602@0] regulator-dummy: no parameters
[    0.544611@0] NET: Registered protocol family 16
[    0.553587@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.558954@0] VPU driver version: v02
[    0.559556@0] load vpu_clk in dts: 182150000Hz(3)
[    0.564365@0] vpu_probe OK
[    0.575644@0] amlogic_gpio gpio: Probed amlogic GPIO driver
[    0.576452@0] register lm device lm-root
[    0.579652@0] register lm device lm1
[    0.583230@0] register lm device lm0
[    0.587019@0] Init pinux probe!
[    0.590651@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
[    0.595903@0] -------early_init_dt_init:115----------
[    0.600559@0] tv_init_module
[    0.603403@0] major number 254 for disp
[    0.607202@0] vout_register_server
[    0.610591@0] register tv module server ok
[    0.614829@0] aml_i2c version: 20140813
[    0.618530@0] plat->state_name:default
[    0.618551@0] master_no = 0, master_regs=fe600500
[    0.618823@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ef3348a8)
[    0.624550@0] aml-i2c i2c-AO: aml i2c bus driver.
[    0.629363@0] plat->state_name:default
[    0.629385@0] master_no = 2, master_regs=fe1087c0
[    0.629632@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ef334ca8)
[    0.635200@0] aml-i2c i2c-B: aml i2c bus driver.
[    0.639939@0] plat->state_name:default
[    0.639961@0] master_no = 3, master_regs=fe1087e0
[    0.640195@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ef3350a8)
[    0.645739@0] aml-i2c i2c-C: aml i2c bus driver.
[    0.650518@0] plat->state_name:default
[    0.650539@0] master_no = 4, master_regs=fe108d20
[    0.650777@0] aml-i2c i2c-D: add adapter aml_i2c_adap4(ef3354a8)
[    0.656302@0] aml-i2c i2c-D: aml i2c bus driver.
[    0.661225@0] call aml_dvfs_init in
[    0.664428@0] [DVFS]aml_dvfs_probe, child name:vcck_dvfs
[    0.664444@0] [DVFS]dvfs table of vcck_dvfs is:
[    0.664453@0] [DVFS]     freq,    min_uV,    max_uV
[    0.664463@0] [DVFS]    96000,    860000,    860000
[    0.664472@0] [DVFS]   192000,    860000,    860000
[    0.664481@0] [DVFS]   312000,    860000,    860000
[    0.664490@0] [DVFS]   408000,    860000,    860000
[    0.664499@0] [DVFS]   504000,    860000,    860000
[    0.664508@0] [DVFS]   600000,    860000,    860000
[    0.664517@0] [DVFS]   720000,    860000,    860000
[    0.664527@0] [DVFS]   816000,    900000,    900000
[    0.664536@0] [DVFS]  1008000,    920000,    920000
[    0.664545@0] [DVFS]  1200000,    970000,    970000
[    0.664554@0] [DVFS]  1320000,   1100000,   1100000
[    0.664563@0] [DVFS]  1488000,   1100000,   1100000
[    0.664573@0] [DVFS]  1536000,   1140000,   1140000
[    0.664863@0] hdmitx: system: amhdmitx_init
[    0.668507@0] hdmitx: system: Ver: 2014May6
[    0.672808@0] hdmitx: system: amhdmitx_probe
[    0.677799@0] hdmitx: system: gate/pwr cmd: 7
[    0.681265@0] hdmitx: system: ALREADY init VIC = 4
[    0.685997@0] hdmitx: system: gate/pwr cmd: 0
[    0.690807@1] hdmitx: system: reset intr mask
[    0.714129@0] hdmitx: system: irq 1
[    0.778971@0] bio: create slab <bio-0> at 0
[    0.780287@0] SCSI subsystem initialized
[    0.782134@0] usbcore: registered new interface driver usbfs
[    0.787256@0] usbcore: registered new interface driver hub
[    0.792738@0] usbcore: registered new device driver usb
[    0.798885@0] mode is 11,sync_duration_den=1,sync_duration_num=60
[    0.803819@0] request vpu clk holdings: vencp 106250000Hz
[    0.809151@0] TV mode 720p selected.
[    0.812719@0] already display in uboot
[    0.821280@0] call aml_pmu_probe_init in
[    0.821688@0] get property:                  use_pwm, value:0x00000001, dec:       1
[    0.824545@1] hdmitx: system: gate/pwr cmd: 4
[    0.832383@0] get property:              table_count, value:0x0000001d, dec:      29
[    0.840083@0] meson_cs_dvfs_probe, table count:29, use_pwm:1, pwm controller:2
[    0.847247@0]  0, 001c0000,  860000
[    0.850725@0]  1, 001b0001,  870000
[    0.854173@0]  2, 001a0002,  880000
[    0.857636@0]  3, 00190003,  890000
[    0.861110@0]  4, 00180004,  900000
[    0.864564@0]  5, 00170005,  910000
[    0.868033@0]  6, 00160006,  920000
[    0.871500@0]  7, 00150007,  930000
[    0.874954@0]  8, 00140008,  940000
[    0.878418@0]  9, 00130009,  950000
[    0.881890@0] 10, 0012000a,  960000
[    0.885350@0] 11, 0011000b,  970000
[    0.888808@0] 12, 0010000c,  980000
[    0.892281@0] 13, 000f000d,  990000
[    0.895736@0] 14, 000e000e, 1000000
[    0.899199@0] 15, 000d000f, 1010000
[    0.902676@0] 16, 000c0010, 1020000
[    0.906126@0] 17, 000b0011, 1030000
[    0.909589@0] 18, 000a0012, 1040000
[    0.913062@0] 19, 00090013, 1050000
[    0.916517@0] 20, 00080014, 1060000
[    0.919985@0] 21, 00070015, 1070000
[    0.923453@0] 22, 00060016, 1080000
[    0.926907@0] 23, 00050017, 1090000
[    0.930380@0] 24, 00040018, 1100000
[    0.933840@0] 25, 00030019, 1110000
[    0.937298@0] 26, 0002001a, 1120000
[    0.940770@0] 27, 0001001b, 1130000
[    0.944225@0] 28, 0000001c, 1140000
[    0.947747@0] get pin for pwm--------
[    0.951346@0] [DVFS]aml_dvfs_register_driver, driver meson-cs-dvfs regist success, mask:1, source id:1
[    0.951917@0] Advanced Linux Sound Architecture Driver Initialized.
[    0.959867@0] Switching to clocksource Timer-E
[    0.979968@0] NET: Registered protocol family 2
[    0.980620@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.986267@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.992823@0] TCP: Hash tables configured (established 8192 bind 8192)
[    0.999229@0] TCP: reno registered
[    1.002562@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.008621@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.015402@0] NET: Registered protocol family 1
[    1.019983@3] RPC: Registered named UNIX socket transport module.
[    1.022411@1] hdmitx: system: gate/pwr cmd: 5
[    1.022414@1] hdmitx: edid: edid ready
[    1.022417@1] hdmitx: system: gate/pwr cmd: 4
[    1.038056@3] RPC: Registered udp transport module.
[    1.042889@3] RPC: Registered tcp transport module.
[    1.047723@3] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.054420@3] wifi_dev_probe
[    1.057166@3] wifi_dt : interrupt_pin=GPIOX_21
[    1.061585@3] wifi_dt : irq_num=null
[    1.065160@3] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
[    1.070237@3] wifi_dt : power_on_pin=GPIOAO_6
[    1.074608@3] wifi_dt : power_on_pin2=GPIOX_11
[    1.078991@3] interrupt_pin=118, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=107
[    1.088063@3] Unpacking initramfs...
[    1.107683@3] Freeing initrd memory: 3376K (c4e09000 - c5155000)
[    1.110583@1] balance_pgdat end zone=0, pgdat_is_balanced=0
[    1.110721@3] bounce pool size: 64 pages
[    1.124815@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.127824@3] NFS: Registering the id_resolver key type
[    1.130442@3] Key type id_resolver registered
[    1.134755@3] Key type id_legacy registered
[    1.140475@3] msgmni has been set to 1197
[    1.144743@3] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.150407@3] io scheduler noop registered (default)
[    1.155364@3] io scheduler deadline registered
[    1.160285@3] io scheduler cfq registered
[    1.172799@3] loop: module loaded
[    1.172848@3] Loading iSCSI transport class v2.0-870.
[    1.176661@3] iscsi: registered transport (tcp)
[    1.181883@3] tun: Universal TUN/TAP device driver, 1.6
[    1.185274@3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.191840@3] PPP generic driver version 2.4.2
[    1.196399@3] NET: Registered protocol family 24
[    1.200738@3] usbcore: registered new interface driver smsc95xx
[    1.206990@3] usbcore: registered new interface driver usb-storage
[    1.212927@3] mousedev: PS/2 mouse device common for all mice
[    1.218535@3] i2c /dev entries driver
[    1.224003@3] hidraw: raw HID events driver (C) Jiri Kosina
[    1.231469@3] usbcore: registered new interface driver usbhid
[    1.232405@1] hdmitx: system: gate/pwr cmd: 5
[    1.232408@1] hdmitx: edid: edid ready
[    1.232417@1] hdmitx: edid: check sum valid
[    1.232420@1] hdmitx: edid: check sum valid
[    1.232425@1] hdmitx: edid: blk0 raw data
[    1.232468@1] 00ffffffffffff00410c00000101010103140103808048780ae692a3544a9926
[    1.232506@1] 0f4a4c2108008bc08180a94001010101010101010101023a801871382d40582c
[    1.232546@1] 450000d05200001e023a80d072382d40102c458000d05200001e000000fc0050
[    1.232585@1] 68696c697073204654560a20000000fd00303e0f4611000a20202020202001c9
[    1.232586@1]
[    1.232589@1] hdmitx: edid: blk1 raw data
[    1.232628@1] 020331f152101f2022210514041312031102160715060126091f071507508301
[    1.232667@1] 00006a030c005000382d802e2ee3050301011d803e73382d407e2c458000d052
[    1.232706@1] 00001e011d80d0721c1620102c258000d05200009e011d00bc52d01e20b82855
[    1.232745@1] 4000d05200001e011d8018711c1620582c250000d05200009e000000000000e2
[    1.232746@1]
[    1.233133@1] hdmitx: edid: find IEEEOUT
[    1.233222@1] hdmitx: video: get current mode: 720p
[    1.233232@1] is_similar_hdmi_vic[325] vic_old=4,mode_new=11
[    1.233236@1] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 4
[    1.233241@1] hdmitx: audio: audio channel num is 0
[    1.233248@1] hdmitx: audio: SPDIF
[    1.233260@1] hdmitx: audio: current VIC: 4
[    1.233263@1] hdmitx: audio: audio sample rate: 0
[    1.233265@1] hdmitx: audio: reset audio N para
[    1.233276@1] hdmitx: audio: PCM out to HDMI
[    1.254138@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
[    1.254141@1] hdmitx: audio: i2s_to_spdif_flag:1
[    1.254143@1] hdmitx: audio: Enable audio spdif to HDMI
[    1.254202@1] hdmitx: cec: CEC not ready
[    1.384582@3] usbhid: USB HID core driver
[    1.389214@3] ashmem: initialized
[    1.392161@3] logger: created 256K log 'log_main'
[    1.396790@3] logger: created 256K log 'log_events'
[    1.401626@3] logger: created 256K log 'log_radio'
[    1.406426@3] logger: created 256K log 'log_system'
[    1.411074@3] vout_init_module
[    1.414073@3] start init vout module
[    1.417854@3] create  vout attribute ok
[    1.421920@3] ge2d_init
[    1.424149@3] ge2d_dev major:247
[    1.427816@3] ge2d start monitor
[    1.430758@3] osd_init
[    1.430768@1] ge2d workqueue monitor start
[    1.437267@3] osd_probe, vinfo:c05cf090
[    1.441444@3] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
[    1.449166@3] osd_probe, mydef_var:c081b91c, vinfo:c05cf090
[    1.454702@3] init fbdev bpp is :32
[    1.458234@3] ---------------clear framebuffer0 memory
[    1.527544@0] Console: switching to colour frame buffer device 240x67
[    1.583618@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
[    1.586341@0] osd_probe, mydef_var:c081b91c, vinfo:c05cf090
[    1.591879@0] don't find to display_size_default from mesonfb-dts
[    1.597963@0] init fbdev bpp is :24
[    1.616789@0] osd probe ok
[    1.629899@0] DI: di_init
[    1.629957@0] DI: di_probe
[    1.630703@0] aml_wdt_driver_init,301
[    1.630873@0] ** disable watchdog
[    1.632552@0] keys===========================================
[    1.637893@0] keys_devno=f400000
[    1.641470@0] securitykey: device aml_keys created
[    1.645914@0] amlkeys=0
[    1.648415@0] platform_driver_register--aml_keys_driver--------------------
[    1.655715@0] start uart_ao_ttyS0:(irq = 122)
[    1.659527@0] register uart_ao ok
[    1.663260@0] start uart_a_ttyS1:(irq = 58)
[    1.666983@0] register uart_a ok
[    1.670622@0] set uart_b pinmux use pinctrl subsystem
[    1.675232@0] P_AO_RTI_PIN_MUX_REG:78025861
[    1.679399@0] start uart_b_ttyS2:(irq = 107)
[    1.683630@0] register uart_b ok
[    1.687222@0] start uart_d_ttyS4:(irq = 126)
[    1.691045@0] register uart_d ok
[    1.694574@0] dwc_otg: version 3.10a 12-MAY-2014
[    1.698877@0] dwc_otg lm-root: dwc_otg_driver_probe(ef3ce200)
[    1.698889@0] dwc_otg_driver_probe NOT match
[    1.703173@0] dwc_otg lm1: dwc_otg_driver_probe(ef3ce400)
[    1.703199@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
[    1.711666@0] USB (1) use clock source: XTAL input
[    1.717494@0] dwc_otg lm1: base=0xfe080000
[    1.717508@0] dwc_otg lm1: dwc_otg_device=0xef596300
[    1.737626@0] Core Release: 3.10a
[    1.737779@0] Setting default values for core params
[    1.740374@0] curmode: 1, host_only: 1
[    1.744141@0] dwc_otg lm1: DMA config: BURST_DEFAULT
[    1.764370@0] Using Buffer DMA mode
[    1.764529@0] OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.766866@0] Working on port type = HOST
[    1.770936@0] dwc_otg lm1: DWC OTG Controller
[    1.775252@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
[    1.781872@0] dwc_otg lm1: irq 63, io mem 0x00000000
[    1.786810@0] -------hcd->flags.d32 = 0
[    1.790602@0] Init: Port Power? op_state=1
[    1.798551@0] Init1: Power Port (0)
[    1.806648@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.816135@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.826117@2] usb usb1: Product: DWC OTG Controller
[    1.834397@2] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd
[    1.842969@2] usb usb1: SerialNumber: lm1
[    1.852094@2] hub 1-0:1.0: USB hub found
[    1.860405@2] hub 1-0:1.0: 1 port detected
[    1.868995@2] dwc_otg lm0: dwc_otg_driver_probe(ef3ce600)
[    1.869023@2] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
[    1.880514@2] USB (0) use clock source: XTAL input
[    1.890070@2] dwc_otg lm0: base=0xfe040000
[    1.890084@2] dwc_otg lm0: dwc_otg_device=0xef3d1280
[    1.910183@2] Core Release: 3.10a
[    1.918707@2] Setting default values for core params
[    1.927367@2] curmode: 1, host_only: 0
[    1.976063@2] dwc_otg lm0: DMA config: BURST_DEFAULT
[    1.996265@2] Using Buffer DMA mode
[    2.005000@2] OTG VER PARAM: 1, OTG VER FLAG: 1
[    2.013759@2] Working on port type = OTG
[    2.022524@2] Current port type: SLAVE
[    2.031369@3] dwc_otg lm0: DWC OTG Controller
[    2.040230@3] dwc_otg lm0: new USB bus registered, assigned bus number 2
[    2.050292@3] dwc_otg lm0: irq 62, io mem 0x00000000
[    2.059355@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.069823@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.080781@3] usb usb2: Product: DWC OTG Controller
[    2.090005@3] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd
[    2.099451@3] usb usb2: SerialNumber: lm0
[    2.109234@3] hub 2-0:1.0: USB hub found
[    2.118216@3] hub 2-0:1.0: 1 port detected
[    2.122134@1] Indeed it is in host mode hprt0 = 00021501
[    2.136266@3] Dedicated Tx FIFOs mode
[    2.145284@3] using timer detect id change, ef424000
[    2.154400@3] boot_device_flag : 1
[    2.163058@3] ===========================================amlnf_init:642,nand device tree ok,dev-name:nand
[    2.174728@0] HOST mode
[    2.174754@3] Nand PHY driver Version: 1.01.001.0006 (c) 2013 Amlogic Inc.
[    2.174761@3] amlnf_phy_init : amlnf init flag 0
[    2.174849@3] ######STS IRQ mode for nand driver
[    2.174929@3] NAND device id: 2c 64 44 4b a9 0 0 0
[    2.174936@3] detect NAND device: B revision NAND 8GiB MT29F64G08CBABA
[    2.184013@3] AML_NAND_NEW_OOB : new oob
[    2.184021@3] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15
[    2.184027@3] boot_device_flag = 1
[    2.185125@3] NAND CKECK  : arg nbbt: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 0
[    2.190197@3] NAND CKECK  : arg ncnf: arg_valid= 1, valid_blk_addr = 7, valid_page_addr = 0
[    2.190564@3] nand shipped bbt at block 6
[    2.207694@3] NAND CKECK  : arg nkey: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0
[    2.208079@3] i=0,register --- nand_key
[    2.227182@3] NAND CKECK  : arg nenv: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 54
[    2.292088@3] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.294091@3] Indeed it is in host mode hprt0 = 00001101
[    2.349296@1] nand adjust phy offset : block 4
[    2.359263@1] nand adjust phy offset : block 4
[    2.369130@1] nfboot     : offset: 0x000000000000 -0x000000800000 : partitons 0 : single_chip single_plane
[    2.372067@0] -------hcd->flags.d32 = 0
[    2.372093@0] Init: Port Power? op_state=1
[    2.372095@0] Init1: Power Port (0)
[    2.413046@1] nfcache    : offset: 0x000006800000 -0x000024800000 : partitons 1 : single_chip multi_plane
[    2.427090@1] nfcode     : offset: 0x00002b000000 -0x000050800000 : partitons 5 : single_chip multi_plane
[    2.441070@1] nfdata     : offset: 0x00007b800000 -0x000184800000 : partitons 1 : single_chip multi_plane
[    2.455074@1] bad block count = 0
[    2.455074@1]
[    2.477979@1] bad block count = 0
[    2.477979@1]
[    2.502428@3] usb 1-1: config 1 interface 0 altsetting 0 has 7 endpoint descriptors, different from the interface descriptor's value: 5
[    2.504449@1] bad block count = 0
[    2.504449@1]
[    2.537346@1] bad block count = 0
[    2.537346@1]
[    2.537349@1] amlnand_add_nftl:
[    2.537808@1] Creating 1 ntd partitions
[    2.537816@1] block_num 146
[    2.540901@1] ------init_ntd
[    2.541548@1] ntd: Giving out device 0 to nfcache
[    2.541553@1] Creating 5 ntd partitions
[    2.541558@1] block_num 322
[    2.548816@1] ntd: Giving out device 1 to nfcode
[    2.548821@1] Creating 1 ntd partitions
[    2.548828@1] block_num 1554
[    2.581966@1] ntd: Giving out device 2 to nfdata
[    2.582915@1] boot_device_flag : 1
[    2.582918@1] register_ntd_blktrans start
[    2.582925@1] ntd device 250!
[    2.582928@1] ntd->name: nfcache
[    2.582936@1] adjust_block_num : 4,reserved_block_ratio 10
[    2.582951@1] nftl version 140911a
[    2.582974@1] nftl part attr 0
[    2.586064@1] size_in_blk 146; total_block 145;
[    2.586067@1] nftl start:145,17
[    2.586358@1] first
[    2.633915@1] average_erase_count:1
[    2.633922@1] second 131,128
[    2.633924@1] part->max_discard_block = 4
[    2.713602@1] all block full!!
[    2.713605@1] all discard block full!!
[    2.713686@1] free list:
[    2.713690@1] free block cnt = 74
[    2.713695@1] new current block is 24
[    2.713698@1] total discard page count is 0
[    2.713704@1] create_part_list:1235,current_used_discard_block=23,current_discard_block_used_count=576
[    2.714787@1] unmappig_pages=24206,discarded_pages=0,mapping_pages=8562
[    2.714789@1] nftl ok!
[    2.715565@1] Enable QUEUE_FLAG_DISCARD for NFTL
[    2.716363@1] aml_nftl_add_ntd ok
[    2.716369@1] ntd device 250!
[    2.716372@1] ntd->name: nfcode
[    2.716378@1] adjust_block_num : 4,reserved_block_ratio 10
[    2.716385@1] nftl version 140911a
[    2.716435@1] nftl part attr 0
[    2.723262@1] nftl start:322,33
[    2.723813@1] first
[    2.828551@1] average_erase_count:2
[    2.828560@1] second 320,289
[    2.828563@1] part->max_discard_block = 4
[    2.980320@3] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
[    2.989403@3] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.998829@3] usb 1-1: Product: 802.11 n WLAN
[    3.006521@3] usb 1-1: Manufacturer: Ralink
[    3.014150@3] usb 1-1: SerialNumber: 1.0
[    3.024601@1] current_block1:124
[    3.146973@1] recover_current_block_mapping invalid page data!!
[    3.155311@1] recover_current_block_mapping invalid page data!!
[    3.163574@1] recover_current_block_mapping invalid page data!!
[    3.171763@1] recover_current_block_mapping invalid page data!!
[    3.179708@1] recover_current_block_mapping invalid page data!!
[    3.182083@2] Indeed it is in host mode hprt0 = 00041901
[    3.194742@1] recover_current_block_mapping invalid page data!!
[    3.202646@1] all discard block full!!
[    3.209988@1] free list:
[    3.217053@1] free block cnt = 216
[    3.224146@1] new current block is 123
[    3.362089@2] usb 2-1: new low-speed USB device number 2 using dwc_otg
[    3.371502@3] Indeed it is in host mode hprt0 = 00041901
[    3.583968@3] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
[    3.592223@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.600970@3] usb 2-1: Product: Wireless USB Device
[    3.608139@3] usb 2-1: Manufacturer: HOLTEK
[    3.623317@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input0
[    3.634348@3] hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
[    3.662869@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input1
[    3.674634@3] hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
[    3.680888@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[    3.807358@0] recover_current_block_mapping : fill the current block, from page 255
[    3.817893@0] total discard page count is 0
[    3.826397@0] create_part_list:1235,current_used_discard_block=140,current_discard_block_used_count=744
[    3.841410@0] unmappig_pages=51809,discarded_pages=0,mapping_pages=22175
[    3.851400@0] nftl ok!
[    3.861272@3] Enable QUEUE_FLAG_DISCARD for NFTL
[    3.871225@3] Enable QUEUE_FLAG_DISCARD for NFTL
[    3.881028@3] Enable QUEUE_FLAG_DISCARD for NFTL
[    3.890753@3] Enable QUEUE_FLAG_DISCARD for NFTL
[    3.900337@3] Enable QUEUE_FLAG_DISCARD for NFTL
[    3.909750@3] aml_nftl_add_ntd ok
[    3.918431@3] ntd device 250!
[    3.927046@3] ntd->name: nfdata
[    3.935630@3] adjust_block_num : 4,reserved_block_ratio 10
[    3.944373@3] nftl version 140911a
[    3.953290@3] nftl part attr 0
[    3.995120@3] size_in_blk 1554; total_block 1553;
[    4.003920@3] nftl start:1553,145
[    4.015001@3] first
[    4.154410@3] found discard block:399
[    4.556776@3] found discard block:1552
[    4.565930@3] average_erase_count:7
[    4.574796@3] second 1526,1408
[    4.583557@3] part->max_discard_block = 4
[    5.523272@3] current_block1:218
[    5.532983@3] recover_current_block_mapping invalid page data!!
[    5.542349@3] recover_current_block_mapping invalid page data!!
[    5.551609@3] recover_current_block_mapping invalid page data!!
[    5.560828@3] recover_current_block_mapping invalid page data!!
[    5.570006@3] recover_current_block_mapping invalid page data!!
[    5.579172@3] recover_current_block_mapping invalid page data!!
[    5.764924@3] currnet_discard_block1:399
[    5.947425@3] reach the last discard page:250
[    5.971915@3] free list:
[    5.980122@3] free block cnt = 941
[    5.988307@3] new current block is 505
[    6.144330@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[    6.572532@0] recover_current_block_mapping : fill the current block, from page 255
[    6.583137@0] total discard page count is 505
[    6.591638@0] create_part_list:1235,current_used_discard_block=399,current_discard_block_used_count=3
[    6.617492@0] unmappig_pages=244514,discarded_pages=44620,mapping_pages=71314
[    6.627808@0] nftl ok!
[    6.637592@1] Enable QUEUE_FLAG_DISCARD for NFTL
[    6.647290@1] aml_nftl_add_ntd ok
[    6.656176@1] init_aml_nftl end
[    6.664929@1] amvideocap_init_module
[    6.673830@1] amvideocap_probe,amvideocap
[    6.682729@1] amvideocap_dev_register buf:0da00000,size:600000.
[    6.692763@1] Amlogic A/V streaming port init
[    6.704943@1] buffersize=262144,0,start=0
[    6.714080@1] Subtitle stbuf alloced at 0xee3c0000, size = 262144
[    6.723649@1] changed the (2) buffer size from 0 to 262144
[    6.733257@1] init vdec memsource 9a00000->d9fffff
[    6.742843@1] [tsync_pcr_init]init success.
[    6.752272@1] regist mpeg12 codec profile
[    6.761662@1] regist mpeg4 codec profile
[    6.770759@1] amvdec_vc1 module init
[    6.779945@1] regist vc1 codec profile
[    6.788843@1] amvdec_h264 module init
[    6.797909@1] regist h264 codec profile
[    6.806666@1] amvdec_h264mvc module init
[    6.815595@1] regist hmvc codec profile
[    6.824200@1] amvdec_h265 module init
[    6.832722@1] regist hevc codec profile
[    6.840977@1] regist mjpeg codec profile
[    6.848821@1] amvdec_real module init
[    6.856599@1] regist real codec profile
[    6.864060@1] amvdec_avs module init
[    6.872002@1] alloc_keep_buffer keep_y_addr ede00000
[    6.879278@1] alloc_keep_buffer keep_u_addr ee400000
[    6.886292@1] alloc_keep_buffer keep_v_addr ee500000
[    6.893159@1] yaddr=ede00000,u_addr=ee400000,v_addr=ee500000
[    6.900705@1] create_ge2d_work_queue video task ok
[    6.908461@1]
[    6.908461@1]
[    6.908461@1]  VECM init
[    6.908461@1]
[    6.938712@1] efuse===========================================
[    6.946466@1] efuse: device efuse created
[    6.953819@1] efuse--------------------------------------------
[    6.961274@1] SARADC Driver init.
[    6.968718@1] __saradc_probe__
[    7.122173@1] saradc calibration: ref_val = 508
[    7.129364@1] saradc calibration: ref_nominal = 512
[    7.136508@1] saradc calibration: coef = 4080
[    7.144199@1] ir irblaster probe
[    7.151859@1] Remote Driver
[    7.159124@1] Remote platform_data g_remote_base=fe600580
[    7.166416@1] set drvdata completed
[    7.173663@1] device_create_file completed
[    7.181592@1] input: aml_keypad as /devices/platform/meson-remote/input/input2
[    7.191186@1] input_register_device completed
[    7.198668@1] [0xffffff00] = 0x1dd0190
[    7.206129@1] [0xffffff04] = 0xf800ca
[    7.213603@1] [0xffffff08] = 0x82006e
[    7.221075@1] [0xffffff0c] = 0x3c0030
[    7.228578@1] [0xffffff10] = 0x30fa0013
[    7.236114@1] [0xffffff18] = 0x6f19000
[    7.243555@1] [0xffffff1c] = 0xbe40
[    7.250910@1] [0x0] = 0xfa00a0
[    7.258227@1] [0x4] = 0xfa00a0
[    7.265515@1] [0x8] = 0xfa00a0
[    7.272742@1] [0xc] = 0x640030
[    7.279756@1] [0x10] = 0x30fa0013
[    7.286627@1] [0x18] = 0x961b800
[    7.293348@1] [0x1c] = 0x9740
[    7.299833@1] [0x20] = 0x104
[    7.306102@1] [0x24] = 0x0
[    7.312216@1] [0x28] = 0x0
[    7.318226@1] set_remote_mode[69]
[    7.324258@1] remote config major:236
[    7.330704@1] physical address:0x2e592000
[    7.336974@1] Meson KeyInput init
[    7.343328@1] GPIO Keypad Driver init.
[    7.349468@1] ==gpio_key_probe==
[    7.355481@1]  reg:2620,clearmask=400040,setmask=1
[    7.361493@1] reg:2622,clearmask=ff0000,set pin=3
[    7.367449@1] reg:2623,clearmask=7000000,setmask=7
[    7.373336@1]  reg:2620,clearmask=800080,setmask=10001
[    7.379180@1] reg:2622,clearmask=ff000000,set pin=3
[    7.385008@1] reg:2623,clearmask=70000000,setmask=7
[    7.390836@1] power key(116) registed.
[    7.390842@0] key 116 up
[    7.402755@1] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input3
[    7.410843@1] gpio keypad register input device completed.
[    7.416999@1] gpio keypad major:235
[    7.423651@1] spi_nor_init
[    7.429952@1] amlogic_spi_nor_probe:
[    7.436033@1] amlogic_spi->state_name:default
[    7.442407@1] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
[    7.450832@1] check_storage_device : spi boot_device_flag : -1
[    7.457372@1] spi_nor_probe
[    7.463684@1] spi_nor_probe 629 boot_device_flag 1 : do not init spi
[    7.470842@1] spi_nor: probe of apollospi:32766 failed with error -12
[    7.478151@1] amlogic_spi_nor_probe over
[    7.484917@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[    7.496093@1] host->base fe108c20
[    7.503081@1] pdata->caps 7
[    7.509898@1] pdata->caps2 0
[    7.516614@1] get property:                     port, value:0x00000001
[    7.524312@1] get property:                ocr_avail, value:0x00200000
[    7.532059@1] get property:                    f_min, value:0x000493e0
[    7.539819@1] get property:                    f_max, value:0x02faf080
[    7.547602@1] get property:                  f_max_w, value:0x02faf080
[    7.555278@1] get property:             max_req_size, value:0x00020000
[    7.562887@1] get property:                   irq_in, value:0x00000003
[    7.570404@1] get property:                  irq_out, value:0x00000005
[    7.577830@1] get property:                  gpio_cd, str:CARD_6
[    7.584732@1] get property:                  pinname, str:sd
[    7.591223@1] get property:                 jtag_pin, str:CARD_0
[    7.598072@1] get property:                card_type, value:0x00000005
[    7.605484@1] get property:                gpio_dat3, str:CARD_4
[    7.652103@1]  reg:2620,clearmask=80008,setmask=10001
[    7.658699@1] reg:2621,clearmask=ff000000,set pin=49
[    7.665270@1] reg:2623,clearmask=7000,setmask=7
[    7.671784@1]  reg:2620,clearmask=200020,setmask=1
[    7.678314@1] reg:2622,clearmask=ff00,set pin=49
[    7.684747@1] reg:2623,clearmask=700000,setmask=7
[    7.692157@2] pdata->caps 10f
[    7.698458@2] pdata->caps2 0
[    7.704747@2] get property:                     port, value:0x00000000
[    7.712087@2] get property:                ocr_avail, value:0x00200000
[    7.719422@2] get property:                    f_min, value:0x000493e0
[    7.726781@2] get property:                    f_max, value:0x02faf080
[    7.734145@2] get property:             max_req_size, value:0x00020000
[    7.741523@2] get property:                  pinname, str:sdio
[    7.748220@2] get property:                card_type, value:0x00000003
[    7.872072@2] [aml_sdio_probe] aml_sdio_probe() success!
[    7.880155@2] host->base fe108e00
[    7.887057@2] pdata->caps 80000547
[    7.893842@2] pdata->caps2 0
[    7.900586@2] get property:                     port, value:0x00000005
[    7.908398@2] get property:                ocr_avail, value:0x00200000
[    7.916230@2] get property:                    f_min, value:0x000493e0
[    7.924084@2] get property:                    f_max, value:0x02faf080
[    7.931946@2] get property:             max_req_size, value:0x00020000
[    7.939829@2] get property:                  pinname, str:emmc
[    7.947006@2] get property:                card_type, value:0x00000001
[    7.954896@2] get property:                gpio_dat3, str:BOOT_3
[    7.962242@2] [is_emmc_exist] host->storage_flag=1, POR_BOOT_VALUE=7
[    7.970010@2] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!
[    8.042058@2] [aml_sdhc_probe] aml_sdhc_probe() success!
[    8.049523@2] [dsp]DSP start addr 0xc5e00000
[    8.056771@2] [dsp]register dsp to char divece(257)
[    8.064887@2] amlogic audio spdif interface device init!
[    8.072342@2] name=nand_key nand_key
[    8.080021@2] register_aes_algorithm:488,new way
[    8.087453@2] unkown current key-name,key_read_show:1396
[    8.094873@2] get keyexample fail, aml_rtc_probe:750
[    8.102524@2] rtc clock error
[    8.110152@2] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
[    8.117999@2] rtc clock error
[    8.125344@2] rtc clock error
[    8.132632@2] rtc clock error
[    8.142438@2] amaudio2: device amaudio2 created
[    8.150078@2] Error: Didn't get power valid value --- wifi_power_probe 323
[    8.158632@2] wifi_power power_gpio is 6
[    8.165840@2] wifi_power power_gpio2 is 108
[    8.173574@2] bcmdhd_wlan_init()
[    8.180639@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ef38e480, size=3760
[    8.189246@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ef38e3c0, size=3760
[    8.197716@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ef38e240, size=3760
[    8.205963@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ef38e180, size=3760
[    8.213996@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ef38e0c0, size=3760
[    8.221968@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ef38e000, size=3760
[    8.229951@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ef38e540, size=3760
[    8.237847@2] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ef38e600, size=3760
[    8.245728@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ef38e6c0, size=7856
[    8.253589@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ef38e780, size=7856
[    8.261422@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ef38e840, size=7856
[    8.269399@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ef38e900, size=7856
[    8.277343@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ef38e9c0, size=7856
[    8.285247@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ef38ea80, size=7856
[    8.293134@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ef38eb40, size=7856
[    8.300955@2] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ef38ec00, size=7856
[    8.308768@2] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ef38ecc0, size=16048
[    8.316657@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ef38e480, size=20504
[    8.324401@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ef38e3c0, size=20504
[    8.332084@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ef38e240, size=81944
[    8.339645@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ef38e180, size=163864
[    8.347238@2] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ef38e0c0, size=20504
[    8.354715@2] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=edab0000, size=65536
[    8.362557@2] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=edc00000, size=65536
[    8.370303@2] bcmdhd_init_wlan_mem: WIFI MEM Allocated
[    8.376401@2] amlogic rfkill init
[    8.382519@2] enter bt_probe of_node
[    8.382537@2] not get gpio_en
[    8.388596@2] not get gpio_wake
[    8.422343@2] wifi_request_32k_clk : OFF-->ON for bt_rfkill
[    8.428513@2] clock_32k_pin(107) : (null)
[    8.434716@2] clock_32k_pin(107) : sdio_wifi
[    8.602732@2] UMP: UMP device driver 0000 loaded
[    8.609005@2] aml_hw_crypto initialization.
[    8.616760@2] enter rt5616_modinit
[    8.623429@2] dummy_codec_platform_probe
[    8.630016@2] == ES8323 == es8323_modinit()
[    8.636964@2] enter aml_i2s_dai_probe
[    8.636979@2] i2s get no clk src setting in dts, use the default mpll 0
[    8.644275@2] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
[    8.653395@2] enter aml_pcm_dai_probe
[    8.653585@2] [aml-spdif-dai]enter aml_dai_spdif_init
[    8.660114@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
[    8.668246@2] audio_set_958_clk, freq=4,
[    8.674941@2] IEC958 16bit
[    8.681618@2] hdmitx: audio: aout notify rate 48000
[    8.688430@2] hdmitx: audio: aout notify size 16
[    8.695186@2] hdmitx: audio: aout notify format CT_PCM
[    8.701918@2] hdmitx: audio: audio channel num is 1
[    8.708653@2] hdmitx: audio: SPDIF
[    8.715250@2] hdmitx: audio: current VIC: 4
[    8.721718@2] hdmitx: audio: audio sample rate: 3
[    8.728136@2] hdmitx: audio: reset audio N para
[    8.734502@2] hdmitx: audio: PCM out to HDMI
[    8.740804@2] hdmitx: audio: i2s_to_spdif_flag:1
[    8.747069@2] hdmitx: audio: Enable audio spdif to HDMI
[    8.753314@2] hdmitx: audio: Audio Type: PCM
[    8.759532@2] hdmitx: audio: set audio param
[    8.765748@2] [aml-spdif-dai]aml_spdif_probe
[    8.772148@2] test codec rt5616
[    8.778160@2] test_codec_of_node, node rt5616 disable
[    8.784189@2] test codec rt5631
[    8.790077@2] test_codec_of_node, node rt5631 disable
[    8.796130@2] test codec wm8960
[    8.802193@2] test_codec_of_node, node wm8960 disable
[    8.808309@2] test codec dummy_codec
[    8.814305@2] using external codec, index = 4
[    8.820238@2] using external dummy codec
[    8.826485@2] enter spdif_dit_probe
[    8.832442@2] aml_spdif_unmute
[    8.838560@2] codec_name = dummy_codec.0
[    8.844790@1] enter aml_set_bias_level level: 1
[    8.844798@3] enter aml_set_bias_level level: 1
[    8.844809@3] enter aml_set_bias_level level: 1
[    8.844816@3] enter aml_set_bias_level level: 2
[    8.844869@2] enter aml_asoc_init
[    8.844915@2] p_aml_audio->hp_disable=1
[    8.850879@2] falied to get spk event delay time paraments from dts file
[    8.858104@2] spk_event delay_time = 0
[    8.865212@2] aml-i2s 0:playback preallocate_dma_buffer: area=f08e7000, addr=2df00000, size=524288
[    8.875393@2] aml-i2s 1:capture preallocate_dma_buffer: area=f05d2000, addr=2de20000, size=65536
[    8.885330@2] aml_snd_m8 aml_m8_sound_card.4:  dummy_codec <-> aml-i2s-dai.0 mapping ok
[    8.894741@0] enter aml_set_bias_level level: 1
[    8.894755@0] enter aml_set_bias_level level: 2
[    8.895702@2] aml-i2s 0:playback preallocate_dma_buffer: area=f0969000, addr=2d800000, size=524288
[    8.906472@2] aml-i2s 1:capture preallocate_dma_buffer: area=f0782000, addr=2dfa0000, size=65536
[    8.916978@2] aml_snd_m8 aml_m8_sound_card.4:  dit-hifi <-> aml-spdif-dai.0 mapping ok
[    8.926775@1] enter aml_set_bias_level level: 1
[    8.926787@1] enter aml_set_bias_level level: 2
[    8.926866@3] enter aml_set_bias_level level: 1
[    8.926877@3] enter aml_set_bias_level level: 2
[    8.928455@0] enter aml_set_bias_level level: 1
[    8.928468@0] enter aml_set_bias_level level: 2
[    8.928590@2] -----ext_codec=1---
[    8.936147@2] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
[    8.944595@2] TCP: cubic registered
[    8.953541@2] NET: Registered protocol family 10
[    8.962158@2] NET: Registered protocol family 17
[    8.970155@2] Key type dns_resolver registered
[    8.979062@2] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[    8.987929@2] Registering SWP/SWPB emulation handler
[    8.996133@2] enter meson_pm_init
[    9.004533@2] enter meson_pm_probe!
[    9.012778@2] ---meson_pm_probe----set output pin success
[    9.021150@2] hdmi: cec_pm: cec config:0xf
[    9.029479@2] meson_pm_probe done !
[    9.037886@2] AO cpu runs ok.
[    9.048390@2] console [netcon0] enabled
[    9.056655@2] netconsole: network logging started
[    9.065022@2] rtc clock error
[    9.073392@2] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
[    9.083821@2] meson_cpufreq_probe:SYSPLL request to be fixed
[    9.092380@2] meson_cpufreq: no voltage_control prop
[    9.100937@2] voltage_control = 0
[    9.110429@2] hdmitx: cec: CEC init
[    9.114889@1] hdmitx: cec: CEC task process
[    9.115126@2] input: cec_input as /devices/virtual/input/input4
[    9.115358@2] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[    9.115358@2] ALSA device list:
[    9.115361@2]   #0: AML-M8AUDIO
[    9.138542@2] Freeing unused kernel memory: 212K (c07a5000 - c07da000)
[    9.170835@1] tvmode set to 720p
[    9.170835@1]
[    9.170855@1] don't set the same mode as current.
[    9.254316@1] vfm_map_store:rm default
[    9.254316@1]
[    9.254407@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[    9.254407@1]
[    9.274336@1] aml_nftl_open ok!
[    9.274587@1] blktrans_ioctl  -cmd: 5331,801c0204,64
[    9.294760@2] aml_nftl_open ok!
[    9.295014@2] blktrans_ioctl  -cmd: 5331,801c0204,64
[    9.298044@0] aml_nftl_open ok!
[    9.298122@0] aml_nftl_open ok!
[    9.323835@0] aml_nftl_open ok!
[    9.323905@0] aml_nftl_open ok!
[    9.348402@1] aml_nftl_open ok!
[    9.349305@1] force enable DISCARD here for ext4 fs
[    9.349325@1] EXT4-fs (system): couldn't mount as ext3 due to feature incompatibilities
[    9.349480@1] aml_nftl_open ok!
[    9.349641@1] force enable DISCARD here for ext4 fs
[    9.349658@1] EXT4-fs (system): couldn't mount as ext2 due to feature incompatibilities
[    9.349780@1] aml_nftl_open ok!
[    9.349928@1] force enable DISCARD here for ext4 fs
[    9.356435@1] checked enable EXT4 DISCARD here
[    9.356456@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
[    9.627778@1] aml_nftl_open ok!
[    9.628564@1] force enable DISCARD here for ext4 fs
[    9.628579@1] EXT4-fs (data): couldn't mount as ext3 due to feature incompatibilities
[    9.628683@1] aml_nftl_open ok!
[    9.628774@1] force enable DISCARD here for ext4 fs
[    9.628784@1] EXT4-fs (data): couldn't mount as ext2 due to feature incompatibilities
[    9.628851@1] aml_nftl_open ok!
[    9.628927@1] force enable DISCARD here for ext4 fs
[    9.631610@1] checked enable EXT4 DISCARD here
[    9.631623@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
[    9.824257@2] systemd[1]: systemd 217 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[    9.824576@2] systemd[1]: Detected architecture 'arm'.
[    9.824844@2] systemd[1]: Running with unpopulated /etc.
[    9.825520@2] systemd[1]: Set hostname to <OpenELEC>.
[    9.825840@2] systemd[1]: Initializing machine ID from random generator.
[    9.826802@2] systemd[1]: Populated /etc with preset unit settings.
[    9.853396@0] config uart_ao_ttyS0:: Character length 8bits/char
[    9.875825@0] Changing uart_ao_ttyS0: baud from 0 to 115200
[   10.057575@2] systemd[1]: Starting Paths.
[   10.057840@2] systemd[1]: Reached target Paths.
[   10.057919@2] systemd[1]: Starting Swap.
[   10.057973@2] systemd[1]: Reached target Swap.
[   10.058022@2] systemd[1]: Starting Root Slice.
[   10.058135@2] systemd[1]: Created slice Root Slice.
[   10.058185@2] systemd[1]: Starting User and Session Slice.
[   10.058341@2] systemd[1]: Created slice User and Session Slice.
[   10.058392@2] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   10.058558@2] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.058608@2] systemd[1]: Starting Delayed Shutdown Socket.
[   10.058728@2] systemd[1]: Listening on Delayed Shutdown Socket.
[   10.058778@2] systemd[1]: Starting Journal Socket (/dev/log).
[   10.058897@2] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.058964@2] systemd[1]: Starting udev Control Socket.
[   10.059066@2] systemd[1]: Listening on udev Control Socket.
[   10.059127@2] systemd[1]: Starting udev Kernel Socket.
[   10.059231@2] systemd[1]: Listening on udev Kernel Socket.
[   10.059297@2] systemd[1]: Starting Journal Socket.
[   10.059422@2] systemd[1]: Listening on Journal Socket.
[   10.059512@2] systemd[1]: Starting System Slice.
[   10.059683@2] systemd[1]: Created slice System Slice.
[   10.059856@2] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.061051@2] systemd[1]: Mounting Temporary Directory...
[   10.062475@2] systemd[1]: Started Debug Shell.
[   10.062594@2] systemd[1]: Mounted Huge Pages File System.
[   10.062693@2] systemd[1]: Mounting POSIX Message Queue File System...
[   10.068915@2] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.070294@2] systemd[1]: Starting Setup machine-id...
[   10.072135@2] systemd[1]: Mounting Debug File System...
[   10.073442@2] systemd[1]: Starting Set ondemand threshold...
[   10.074921@2] systemd[1]: Starting Show Version...
[   10.114965@3] systemd[1]: Starting Load Kernel Modules...
[   10.116364@3] systemd[1]: Starting udev Coldplug all Devices...
[   10.117613@3] systemd[1]: Starting Slices.
[   10.117742@3] systemd[1]: Reached target Slices.
[   10.117861@3] systemd[1]: Mounting Variable Directory...
[   10.119033@3] systemd[1]: Starting Kodi config dir rebrand...
[   10.124706@3] systemd[1]: Started Remount Root and Kernel File Systems.
[   10.125517@3] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   10.126150@3] systemd[1]: Starting Create Static Device Nodes in /dev...
[   10.221910@3] systemd[1]: Mounted Debug File System.
[   10.229307@2] systemd[1]: Mounted POSIX Message Queue File System.
[   10.230806@2] systemd[1]: Started Create Static Device Nodes in /dev.
[   10.231450@2] systemd[1]: Starting Local File Systems (Pre).
[   10.231638@2] systemd[1]: Reached target Local File Systems (Pre).
[   10.248984@2] systemd[1]: Started Set ondemand threshold.
[   10.254056@2] systemd[1]: Mounted Temporary Directory.
[   10.258972@2] systemd[1]: Started Kodi config dir rebrand.
[   10.270199@2] systemd[1]: Mounted Variable Directory.
[   10.314593@1] systemd[1]: Started Show Version.
[   10.318246@2] gpu cooling register okay with err=0
[   10.318838@2] Mali: Mali device driver loaded
[   10.334488@2] Triggered SDIO WiFi power on and bus rescan.
[   10.334500@2] wifi_setup_dt
[   10.334506@2] wifi_request_32k_clk : ON-->ON for sdio_wifi
[   10.334511@2] interrupt_pin(118) : (null)
[   10.334533@2]  reg:2620,clearmask=100010,setmask=0
[   10.334539@2] reg:2622,clearmask=ff,set pin=118
[   10.334544@2] reg:2623,clearmask=70000,setmask=4
[   10.334551@2] interrupt_pin(118) : sdio_wifi
[   10.334558@2] power_on_pin(6) : (null)
[   10.334573@2] power_on_pin(6) : sdio_wifi
[   10.334583@2] power_on_pin2(108) : (null)
[   10.334596@2] power_on_pin2(108) : sdio_wifi
[   10.334765@3] Disconnect cb-Host
[   10.346151@0] systemd[1]: Started Setup machine-id.
[   10.382165@3] usb 2-1: USB disconnect, device number 2
[   10.416560@0] systemd[1]: Started udev Coldplug all Devices.
[   10.445202@0] systemd[1]: Starting Journal Service...
[   10.446391@0] systemd[1]: Starting Setup Timezone data...
[   10.448995@0] systemd[1]: Started Debug /var/log relink.
[   10.449126@0] systemd[1]: Starting Local File Systems.
[   10.449226@0] systemd[1]: Reached target Local File Systems.
[   10.449401@0] systemd[1]: Started Rebuild Journal Catalog.
[   10.469167@2] systemd[1]: Started Setup Timezone data.
[   10.612463@2] systemd[1]: Started Journal Service.
[   10.637831@2] systemd-journald[1765]: Received request to flush runtime journal from PID 1
[   10.642099@3] WIFI  Disable! 6
[   10.952065@3] WIFI  Enable! 6
[   11.292140@3] Indeed it is in host mode hprt0 = 00041901
[   11.429295@2] cfg80211: Calling CRDA to update world regulatory domain
[   11.429440@2] cfg80211: World regulatory domain updated:
[   11.429450@2] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.429457@2] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
[   11.429463@2] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
[   11.429469@2] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
[   11.429475@2] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   11.429481@2] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   11.429487@2] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
[   11.429493@2] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   11.429499@2] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   11.464315@0] rtc clock error
[   11.472121@3] usb 2-1: new low-speed USB device number 3 using dwc_otg
[   11.474222@3] Indeed it is in host mode hprt0 = 00041901
[   11.513020@0] aml_nftl_open ok!
[   11.513957@0] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.514443@1] aml_nftl_open ok!
[   11.515170@0] aml_nftl_open ok!
[   11.516100@1] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.516151@2] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.521385@1] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.527730@0] aml_nftl_open ok!
[   11.528886@0] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.531966@0] aml_nftl_open ok!
[   11.532565@0] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.566257@2] blktrans_ioctl  -cmd: 5331,801c0204,64
[   11.673829@0] Indeed it is in host mode hprt0 = 00001101
[   11.687114@3] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
[   11.687128@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   11.687135@3] usb 2-1: Product: Wireless USB Device
[   11.687141@3] usb 2-1: Manufacturer: HOLTEK
[   11.695480@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input5
[   11.696706@3] hid-generic 0003:04D9:A01C.0003: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
[   11.711942@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input6
[   11.720028@3] hid-generic 0003:04D9:A01C.0004: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
[   11.852128@3] usb 1-1: reset high-speed USB device number 2 using dwc_otg
[   11.854110@3] Indeed it is in host mode hprt0 = 00001101
[   12.062636@3] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[   12.069317@3] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[   12.070136@3] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.072563@3] usbcore: registered new interface driver rt2800usb
[   11.952088@1] [aml_sdio_timeout] time_start_cnt:999
[   11.952088@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x1f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
[   11.952088@1] [aml_sdio_timeout] time_start_cnt:1000
[   11.952088@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
[   11.952088@1] 
[   13.952332@1] [aml_sdio_timeout] time_start_cnt:995
[   13.952332@1] <6>[   13.984706@1] sdio: new high speed SDIO card at address 0001, clock 39843750, 4-bit-bus-width
[   13.991944@3] [sdio_reinit] finish
[   13.952637@1] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
[   13.952637@1] 
[   14.086432@1] Console: switching to colour dummy device 80x30
[   14.106234@2] RTL871X: module init start
[   14.106249@2] RTL871X: rtl8723bs v4.3.5_11545.20140603_BTCOEX20140507-4E40
[   14.106254@2] RTL871X: build time: Jun 23 2015 23:17:03
[   14.106259@2] RTL871X: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[   14.106262@2] wifi_setup_dt
[   14.106268@2] wifi_request_32k_clk : ON-->ON for sdio_wifi
[   14.106274@2] interrupt_pin(118) : sdio_wifi
[   14.106281@2] sdio_wifi is using the pin GPIOX_21
[   14.106286@2] wifi_dt : gpio op failed(-16) at line 210
[   14.106298@2]  reg:2620,clearmask=100010,setmask=0
[   14.106303@2] reg:2622,clearmask=ff,set pin=118
[   14.106308@2] reg:2623,clearmask=70000,setmask=4
[   14.106313@2] interrupt_pin(118) : sdio_wifi
[   14.106318@2] power_on_pin(6) : sdio_wifi
[   14.106322@2] sdio_wifi is using the pin GPIOAO_6
[   14.106327@2] wifi_dt : gpio op failed(-16) at line 232
[   14.106334@2] power_on_pin(6) : sdio_wifi
[   14.106339@2] power_on_pin2(108) : sdio_wifi
[   14.106343@2] sdio_wifi is using the pin GPIOX_11
[   14.106348@2] wifi_dt : gpio op failed(-16) at line 244
[   14.106353@2] power_on_pin2(108) : sdio_wifi
[   14.106357@2] ######platform_wifi_power_on:
[   14.106364@2] WIFI  Disable! 6
[   14.106553@3] Disconnect cb-Host
[   14.132161@2] usb 2-1: USB disconnect, device number 3
[   14.257952@0] cur_mode = 0
[   14.257978@0] [0x0] = 0x1dd0190
[   14.257987@0] [0x4] = 0xf800ca
[   14.257997@0] [0x8] = 0x82006e
[   14.258007@0] [0xc] = 0x3c0030
[   14.258014@0] [0x10] = 0x30fa0013
[   14.258022@0] [0x18] = 0x6f19000
[   14.258029@0] [0x1c] = 0x9f40
[   14.258035@0] [0x20] = 0x0
[   14.258045@0] [0x24] = 0x0
[   14.258052@0] [0x28] = 0x0
[   14.258062@0] set_remote_mode[69]
[   14.412079@3] WIFI  Enable! 6
[   14.672150@3] Indeed it is in host mode hprt0 = 00041901
[   14.732143@3] sdio_reset_comm():
[   14.766251@0] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   14.793713@0] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   14.852120@3] usb 2-1: new low-speed USB device number 4 using dwc_otg
[   14.853731@3] Indeed it is in host mode hprt0 = 00041901
[   15.058098@3] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.065400@3] usb 2-1: New USB device found, idVendor=04d9, idProduct=a01c
[   15.065423@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   15.065436@3] usb 2-1: Product: Wireless USB Device
[   15.065449@3] usb 2-1: Manufacturer: HOLTEK
[   15.112227@3] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.0/input/input7
[   15.128614@3] hid-generic 0003:04D9:A01C.0005: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-lm0-1/input0
[   15.149187@0] input: HOLTEK Wireless USB Device as /devices/lm0/usb2/2-1/2-1:1.1/input/input8
[   15.150494@0] hid-generic 0003:04D9:A01C.0006: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-lm0-1/input1
[   15.473993@0] wlan0: authenticate with 58:98:35:bc:bb:1e
[   15.512807@2] wlan0: send auth to 58:98:35:bc:bb:1e (try 1/3)
[   15.514860@0] wlan0: authenticated
[   15.522411@3] wlan0: associate with 58:98:35:bc:bb:1e (try 1/3)
[   15.525910@0] wlan0: RX AssocResp from 58:98:35:bc:bb:1e (capab=0x411 status=0 aid=4)
[   15.545788@1] wlan0: associated
[   15.545815@1] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   16.101979@3] Digital output mode: 0 - PCM
[   16.180915@3] aml_i2s_close device type 8
[   16.206643@3] IEC958 16bit
[   16.206660@3] hdmitx: audio: aout notify rate 48000
[   16.206665@3] hdmitx: audio: aout notify size 16
[   16.206673@3] hdmitx: audio: audio channel num is 1
[   16.206681@3] hdmitx: audio: SPDIF
[   16.206693@3] hdmitx: audio: current VIC: 4
[   16.206696@3] hdmitx: audio: audio sample rate: 3
[   16.206701@3] hdmitx: audio: reset audio N para
[   16.206712@3] hdmitx: audio: PCM out to HDMI
[   16.206716@3] hdmitx: audio: i2s_to_spdif_flag:1
[   16.206720@3] hdmitx: audio: Enable audio spdif to HDMI
[   16.206727@3] hdmitx: audio: Audio Type: PCM
[   16.206780@3] hdmitx: audio: set audio param
[   16.206789@3] aml_i2s_close device type 2
[   16.363210@0] buf=0
[   16.363222@0] IEC958_mode_raw=0
[   16.363264@0] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
[   16.363270@0] last mode 0,now 0
[   16.369677@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   16.369694@0] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
[   16.369699@0] audio_set_958_clk, freq=5,
[   16.369706@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   16.369711@0] iec958 mode PCM16
[   16.369717@0] IEC958 16bit
[   16.369724@0] hdmitx: audio: aout notify rate 44100
[   16.369729@0] hdmitx: audio: aout notify size 16
[   16.369736@0] hdmitx: audio: audio channel num is 1
[   16.369744@0] hdmitx: audio: SPDIF
[   16.369755@0] hdmitx: audio: current VIC: 4
[   16.369759@0] hdmitx: audio: audio sample rate: 2
[   16.369763@0] hdmitx: audio: reset audio N para
[   16.369773@0] hdmitx: audio: PCM out to HDMI
[   16.369778@0] hdmitx: audio: i2s_to_spdif_flag:1
[   16.369782@0] hdmitx: audio: Enable audio spdif to HDMI
[   16.369791@0] hdmitx: audio: Audio Type: PCM
[   16.369833@0] hdmitx: audio: set audio param
[   16.369838@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
[   16.369897@3] enter aml_set_bias_level level: 1
[   16.369905@3] enter aml_set_bias_level level: 2
[   16.370148@0] ----aml_hw_iec958_init,runtime->rate=44100--
[   16.370157@0] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   16.370162@0] iec958 mode PCM16
[   16.370168@0] IEC958 16bit
[   16.370174@0] hdmitx: audio: aout notify rate 44100
[   16.370178@0] hdmitx: audio: aout notify size 16
[   16.370184@0] hdmitx: audio: audio channel num is 1
[   16.370190@0] hdmitx: audio: SPDIF
[   16.370204@0] hdmitx: audio: current VIC: 4
[   16.370208@0] hdmitx: audio: audio sample rate: 2
[   16.370212@0] hdmitx: audio: reset audio N para
[   16.370221@0] hdmitx: audio: PCM out to HDMI
[   16.370226@0] hdmitx: audio: i2s_to_spdif_flag:1
[   16.370229@0] hdmitx: audio: Enable audio spdif to HDMI
[   16.370236@0] hdmitx: audio: Audio Type: PCM
[   16.370277@0] hdmitx: audio: set audio param
[   16.370282@0] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
[   16.370320@1] enter aml_set_bias_level level: 1
[   16.370328@1] enter aml_set_bias_level level: 2
[   16.375569@0] [aml-spdif-dai]aiu 958 playback enable
[   16.747424@3] [sdio_reinit] finish
[   16.816724@1] RTL871X: rtw_ndev_init(wlan1)
[   16.818275@1] RTL871X: rtw_ndev_init(wlan2)
[   16.822302@1] RTL871X: module init ret=0
[   16.837199@1] Bluetooth: Core ver 2.16
[   16.838700@1] NET: Registered protocol family 31
[   16.838704@1] Bluetooth: HCI device and connection manager initialized
[   16.838757@1] Bluetooth: HCI socket layer initialized
[   16.838794@1] Bluetooth: L2CAP socket layer initialized
[   16.838933@1] Bluetooth: SCO socket layer initialized
[   16.844268@1] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.19
[   16.844830@1] usbcore: registered new interface driver rtk_btusb
[   16.881152@2] hdmitx: edid: not find mapped display mode
[   16.888795@2] tvmode set to 1080p
[   16.888826@2] mode is 15,sync_duration_den=1,sync_duration_num=60
[   16.888838@2] request vpu clk holdings: vencp 159375000Hz
[   16.888845@2] TV mode 1080p selected.
[   16.888857@2] tvoutc_setmode[489]
[   16.888864@2] new mode 1080p set ok
[   16.888875@2] hdmitx: video: get current mode: 1080p
[   16.888883@2] is_similar_hdmi_vic[325] vic_old=4,mode_new=15
[   16.888894@2] hdmitx: video: get current mode: 1080p
[   16.888903@2] is_similar_hdmi_vic[325] vic_old=4,mode_new=15
[   16.888911@2] hdmitx: system: gate/pwr cmd: 7
[   16.888962@2] hdmitx: system: already init VIC = 0  Now VIC = 16
[   16.888975@2] hdmitx: system:  16 (cd0,cs0,pm1,vd0,1)
[   16.888983@2] hdmitx: system: gate/pwr cmd: 0
[   16.888991@2] hdmitx: system: hw reset
[   16.890039@2] hdmitx: audio: SPDIF
[   16.890105@2] reconfig packet setting done
[   16.910107@2] hdmitx: system: set pll
[   16.910120@2] hdmitx: system: param->VIC:16
[   16.918868@2] mode is: 15
[   16.918882@2] VPU_VIU_VENC_MUX_CTRL: 0xa
[   16.918886@2] viu chan = 1
[   16.918890@2] VPU_VIU_VENC_MUX_CTRL: 0xa
[   16.918893@2] config HPLL
[   16.918898@2] set_hpll_clk_out[167] clk = 2970
[   16.932112@2] config HPLL done
[   16.932134@2] enc_vpu_bridge_reset[290]
[   17.072083@2] hdmitx: system: phy setting done
[   17.072098@2] Sink is HDMI device
[   17.072106@2] No sink attached
[   17.072150@2] hdmitx: audio: audio channel num is 1
[   17.072158@2] hdmitx: audio: SPDIF
[   17.072170@2] hdmitx: audio: current VIC: 16
[   17.072174@2] hdmitx: audio: audio sample rate: 2
[   17.072179@2] hdmitx: audio: reset audio N para
[   17.072189@2] hdmitx: audio: PCM out to HDMI
[   17.072194@2] hdmitx: audio: i2s_to_spdif_flag:1
[   17.072197@2] hdmitx: audio: Enable audio spdif to HDMI
[   17.072204@2] hdmitx: audio: Audio Type: PCM
[   17.084119@2] set_vout_mode[174]
[   18.317666@1] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   18.385042@1] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[   19.266416@1] RTL871X: nolinked power save enter
[   21.182134@0] enter aml_set_bias_level level: 1
[   21.182142@0] enter aml_set_bias_level level: 2
[   22.319393@3] RTL871X: nolinked power save leave
[   24.142078@1] hdmitx: cec: CEC node init
[   24.142097@1] hdmitx: cec: cec_func_config: 0xf; P_AO_DEBUG_REG0:0xf
[   24.142104@1] hdmitx: cec: Set PWM_E out put RTC 32K!
[   24.142109@1] hdmitx: cec: enable:int mask:0x6
[   24.142959@1] hdmitx: cec: CEC: start poll dev
[   24.167594@3] RTL871X: nolinked power save enter
[   24.344298@2] hdmitx: cec: hw reset :logical addr:0x14
[   24.344312@2] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 0
[   24.344317@2] hdmitx: cec: player_dev[0]:0x4
[   24.344322@2] hdmitx: cec: physical address:0x5000
[   24.344408@2] hdmitx: cec: Set logical address: 4
[   24.463705@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   24.463716@0] hdmitx: cec: : Key pressed
[   24.463721@0] hdmitx: cec: :operands_irq[0]:0x4
[   24.463744@0] hdmitx: cec: :key map:106
[   24.805931@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   24.956266@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   24.956279@0] hdmitx: cec: : Key pressed
[   24.956284@0] hdmitx: cec: :operands_irq[0]:0x4
[   24.956314@0] hdmitx: cec: :key map:106
[   25.159072@0] hdmitx: cec: opcode:0x32, hdmitx_device->cec_func_config:0xf
[   25.228896@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   25.434619@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   25.434631@0] hdmitx: cec: : Key pressed
[   25.434636@0] hdmitx: cec: :operands_irq[0]:0x4
[   25.434657@0] hdmitx: cec: :key map:106
[   25.482108@2] hdmitx: cec: cec node init: cec features ok !
[   25.482467@2] hdmitx: cec: cec_set_menu_language:p.o.r
[   25.584442@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   25.700071@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
[   25.790929@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   25.790933@0] hdmitx: cec: : Key pressed
[   25.790936@0] hdmitx: cec: :operands_irq[0]:0x4
[   25.790971@0] hdmitx: cec: :key map:106
[   25.909320@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   26.552525@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   26.552538@0] hdmitx: cec: : Key pressed
[   26.552543@0] hdmitx: cec: :operands_irq[0]:0x3
[   26.552562@0] hdmitx: cec: :key map:105
[   26.892327@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   27.341531@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   27.341543@0] hdmitx: cec: : Key pressed
[   27.341548@0] hdmitx: cec: :operands_irq[0]:0x2
[   27.341563@0] hdmitx: cec: :key map:108
[   27.689903@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   28.092284@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   28.092295@0] hdmitx: cec: : Key pressed
[   28.092300@0] hdmitx: cec: :operands_irq[0]:0x4
[   28.092323@0] hdmitx: cec: :key map:106
[   28.428951@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   28.520492@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   28.520508@0] hdmitx: cec: : Key pressed
[   28.520514@0] hdmitx: cec: :operands_irq[0]:0x0
[   28.520545@0] hdmitx: cec: :key map:353
[   28.853411@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   31.328047@1] RTL871X: nolinked power save leave
[   31.787343@3] AO cpu stop ok.
[   31.787724@3] AO cpu runs ok.
[   15.732403@3] [aml_sdio_timeout] time_start_cnt:1000
[   15.732403@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=1, pdata->width=1, conf=0x41727001, clock=39843750
[   15.732403@3] [aml_sdio_timeout] time_start_cnt:999
[   15.732403@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=1, pdata->width=1, conf=0x41727001, clock=39843750
[   15.732403@3] AO cpu stop ok.
[   31.788416@3] AO cpu runs ok.
[   33.177200@1] RTL871X: nolinked power save enter
[   36.493679@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   36.493688@0] hdmitx: cec: : Key pressed
[   36.493697@0] hdmitx: cec: :operands_irq[0]:0x0
[   36.493737@0] hdmitx: cec: :key map:353
[   36.852420@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   38.543786@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   38.543892@0] hdmitx: cec: : Key pressed
[   38.543967@0] hdmitx: cec: :operands_irq[0]:0x2
[   38.544104@0] hdmitx: cec: :key map:108
[   38.892541@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   39.403505@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   39.403560@0] hdmitx: cec: : Key pressed
[   39.403597@0] hdmitx: cec: :operands_irq[0]:0x2
[   39.403668@0] hdmitx: cec: :key map:108
[   39.752649@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   41.683894@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   41.683999@0] hdmitx: cec: : Key pressed
[   41.684071@0] hdmitx: cec: :operands_irq[0]:0x4
[   41.684210@0] hdmitx: cec: :key map:106
[   42.032249@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   42.665539@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   42.665550@0] hdmitx: cec: : Key pressed
[   42.665555@0] hdmitx: cec: :operands_irq[0]:0x2
[   42.665569@0] hdmitx: cec: :key map:108
[   42.999303@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   44.272373@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   44.272475@0] hdmitx: cec: : Key pressed
[   44.272547@0] hdmitx: cec: :operands_irq[0]:0x0
[   44.272688@0] hdmitx: cec: :key map:353
[   44.619597@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   45.342956@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   45.343058@0] hdmitx: cec: : Key pressed
[   45.343132@0] hdmitx: cec: :operands_irq[0]:0x0
[   45.343269@0] hdmitx: cec: :key map:353
[   45.678691@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   45.846534@1] RTL871X: nolinked power save leave
[   48.095399@1] RTL871X: nolinked power save enter
[   53.071153@1] RTL871X: nolinked power save leave
[   55.337108@3] RTL871X: nolinked power save enter
[   58.053493@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   58.053504@0] hdmitx: cec: : Key pressed
[   58.053509@0] hdmitx: cec: :operands_irq[0]:0x4
[   58.053523@0] hdmitx: cec: :key map:106
[   58.320873@1] RTL871X: nolinked power save leave
[   58.392664@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   59.081251@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   59.081262@0] hdmitx: cec: : Key pressed
[   59.081267@0] hdmitx: cec: :operands_irq[0]:0x0
[   59.081280@0] hdmitx: cec: :key map:353
[   59.418337@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   60.309930@3] RTL871X: nolinked power save enter
[   60.921799@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   60.921904@0] hdmitx: cec: : Key pressed
[   60.921978@0] hdmitx: cec: :operands_irq[0]:0x0
[   60.922116@0] hdmitx: cec: :key map:353
[   60.984941@1] wlan0: deauthenticating from 58:98:35:bc:bb:1e by local choice (reason=3)
[   61.057874@1] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   61.061853@1] cfg80211: Calling CRDA to update world regulatory domain
[   61.063039@1] cfg80211: World regulatory domain updated:
[   61.063058@1] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   61.063069@1] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
[   61.063081@1] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
[   61.063091@1] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
[   61.063098@1] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   61.063109@1] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   61.063115@1] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
[   61.063121@1] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
[   61.063130@1] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   61.271865@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   63.061750@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   63.061761@0] hdmitx: cec: : Key pressed
[   63.061766@0] hdmitx: cec: :operands_irq[0]:0x4
[   63.061779@0] hdmitx: cec: :key map:106
[   63.407366@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   64.273496@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   64.273601@0] hdmitx: cec: : Key pressed
[   64.273675@0] hdmitx: cec: :operands_irq[0]:0x2
[   64.273817@0] hdmitx: cec: :key map:108
[   64.618695@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   64.904352@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   64.904406@0] hdmitx: cec: : Key pressed
[   64.904443@0] hdmitx: cec: :operands_irq[0]:0x0
[   64.904516@0] hdmitx: cec: :key map:353
[   65.239883@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   66.859395@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   66.859497@0] hdmitx: cec: : Key pressed
[   66.859570@0] hdmitx: cec: :operands_irq[0]:0x0
[   66.859703@0] hdmitx: cec: :key map:353
[   67.212107@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   71.052961@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   71.052977@0] hdmitx: cec: : Key pressed
[   71.052982@0] hdmitx: cec: :operands_irq[0]:0x0
[   71.053002@0] hdmitx: cec: :key map:353
[   71.411867@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   72.783079@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   72.783089@0] hdmitx: cec: : Key pressed
[   72.783094@0] hdmitx: cec: :operands_irq[0]:0x4
[   72.783108@0] hdmitx: cec: :key map:106
[   73.131702@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   73.593053@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   73.593109@0] hdmitx: cec: : Key pressed
[   73.593147@0] hdmitx: cec: :operands_irq[0]:0x2
[   73.593219@0] hdmitx: cec: :key map:108
[   73.938945@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   74.124424@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   74.124530@0] hdmitx: cec: : Key pressed
[   74.124602@0] hdmitx: cec: :operands_irq[0]:0x0
[   74.124739@0] hdmitx: cec: :key map:353
[   74.458646@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   75.551086@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   75.551188@0] hdmitx: cec: : Key pressed
[   75.551259@0] hdmitx: cec: :operands_irq[0]:0x0
[   75.551393@0] hdmitx: cec: :key map:353
[   75.649255@2] [aml-spdif-dai]aiu 958 playback disable
[   75.649319@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
[   75.649326@2] audio_set_958_clk, freq=4,
[   75.649337@2] IEC958 16bit
[   75.649347@2] hdmitx: audio: aout notify rate 48000
[   75.649352@2] hdmitx: audio: aout notify size 16
[   75.649361@2] hdmitx: audio: audio channel num is 1
[   75.649369@2] hdmitx: audio: SPDIF
[   75.649381@2] hdmitx: audio: current VIC: 16
[   75.649385@2] hdmitx: audio: audio sample rate: 3
[   75.649390@2] hdmitx: audio: reset audio N para
[   75.649403@2] hdmitx: audio: PCM out to HDMI
[   75.649408@2] hdmitx: audio: i2s_to_spdif_flag:1
[   75.649411@2] hdmitx: audio: Enable audio spdif to HDMI
[   75.649418@2] hdmitx: audio: Audio Type: PCM
[   75.649464@2] hdmitx: audio: set audio param
[   75.649474@2] aml_i2s_close device type 2
[   75.937749@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   76.844262@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   76.844365@0] hdmitx: cec: : Key pressed
[   76.844438@0] hdmitx: cec: :operands_irq[0]:0x0
[   76.844607@0] hdmitx: cec: :key map:353
[   77.191984@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   77.971186@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   77.971281@0] hdmitx: cec: : Key pressed
[   77.971354@0] hdmitx: cec: :operands_irq[0]:0x0
[   77.971580@0] hdmitx: cec: :key map:353
[   78.318884@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   79.123143@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   79.123240@0] hdmitx: cec: : Key pressed
[   79.123311@0] hdmitx: cec: :operands_irq[0]:0x2
[   79.123566@0] hdmitx: cec: :key map:108
[   79.448342@3] Digital output mode: 0 - PCM
[   79.459351@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   79.514178@3] aml_i2s_close device type 8
[   79.538820@3] IEC958 16bit
[   79.538836@3] hdmitx: audio: aout notify rate 48000
[   79.538841@3] hdmitx: audio: aout notify size 16
[   79.538848@3] hdmitx: audio: audio channel num is 1
[   79.538857@3] hdmitx: audio: SPDIF
[   79.538880@3] hdmitx: audio: current VIC: 16
[   79.538884@3] hdmitx: audio: audio sample rate: 3
[   79.538889@3] hdmitx: audio: reset audio N para
[   79.538900@3] hdmitx: audio: PCM out to HDMI
[   79.538904@3] hdmitx: audio: i2s_to_spdif_flag:1
[   79.538918@3] hdmitx: audio: Enable audio spdif to HDMI
[   79.538925@3] hdmitx: audio: Audio Type: PCM
[   79.538967@3] hdmitx: audio: set audio param
[   79.538974@3] aml_i2s_close device type 2
[   79.646205@1] buf=0
[   79.646217@1] IEC958_mode_raw=0
[   79.646259@1] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
[   79.646264@1] last mode 0,now 0
[   79.652674@1] ----aml_hw_iec958_init,runtime->rate=44100--
[   79.652687@1] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
[   79.652692@1] audio_set_958_clk, freq=5,
[   79.652698@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   79.652704@1] iec958 mode PCM16
[   79.652710@1] IEC958 16bit
[   79.652717@1] hdmitx: audio: aout notify rate 44100
[   79.652721@1] hdmitx: audio: aout notify size 16
[   79.652728@1] hdmitx: audio: audio channel num is 1
[   79.652735@1] hdmitx: audio: SPDIF
[   79.652746@1] hdmitx: audio: current VIC: 16
[   79.652750@1] hdmitx: audio: audio sample rate: 2
[   79.652754@1] hdmitx: audio: reset audio N para
[   79.652764@1] hdmitx: audio: PCM out to HDMI
[   79.652769@1] hdmitx: audio: i2s_to_spdif_flag:1
[   79.652773@1] hdmitx: audio: Enable audio spdif to HDMI
[   79.652779@1] hdmitx: audio: Audio Type: PCM
[   79.652822@1] hdmitx: audio: set audio param
[   79.652827@1] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
[   79.652903@3] enter aml_set_bias_level level: 1
[   79.652912@3] enter aml_set_bias_level level: 2
[   79.653158@1] ----aml_hw_iec958_init,runtime->rate=44100--
[   79.653166@1] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[   79.653172@1] iec958 mode PCM16
[   79.653178@1] IEC958 16bit
[   79.653184@1] hdmitx: audio: aout notify rate 44100
[   79.653188@1] hdmitx: audio: aout notify size 16
[   79.653194@1] hdmitx: audio: audio channel num is 1
[   79.653200@1] hdmitx: audio: SPDIF
[   79.653211@1] hdmitx: audio: current VIC: 16
[   79.653215@1] hdmitx: audio: audio sample rate: 2
[   79.653218@1] hdmitx: audio: reset audio N para
[   79.653229@1] hdmitx: audio: PCM out to HDMI
[   79.653233@1] hdmitx: audio: i2s_to_spdif_flag:1
[   79.653236@1] hdmitx: audio: Enable audio spdif to HDMI
[   79.653243@1] hdmitx: audio: Audio Type: PCM
[   79.653284@1] hdmitx: audio: set audio param
[   79.653289@1] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
[   79.653328@3] enter aml_set_bias_level level: 1
[   79.653334@3] enter aml_set_bias_level level: 2
[   79.658339@1] [aml-spdif-dai]aiu 958 playback enable
[   79.861473@3] hdmitx: edid: not find mapped display mode
[   79.863127@3] tvmode set to 1080p
[   79.863147@3] don't set the same mode as current.
[   79.953209@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   79.953220@0] hdmitx: cec: : Key pressed
[   79.953225@0] hdmitx: cec: :operands_irq[0]:0x2
[   79.953257@0] hdmitx: cec: :key map:108
[   80.161062@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   84.522156@0] enter aml_set_bias_level level: 1
[   84.522173@0] enter aml_set_bias_level level: 2
[   86.823017@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   86.823029@0] hdmitx: cec: : Key pressed
[   86.823034@0] hdmitx: cec: :operands_irq[0]:0x4
[   86.823059@0] hdmitx: cec: :key map:106
[   87.171439@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   87.311885@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   87.311898@0] hdmitx: cec: : Key pressed
[   87.311903@0] hdmitx: cec: :operands_irq[0]:0x4
[   87.311920@0] hdmitx: cec: :key map:106
[   87.667349@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   87.758802@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   87.758827@0] hdmitx: cec: : Key pressed
[   87.758845@0] hdmitx: cec: :operands_irq[0]:0x4
[   87.758886@0] hdmitx: cec: :key map:106
[   88.019077@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   88.731221@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   88.731249@0] hdmitx: cec: : Key pressed
[   88.731270@0] hdmitx: cec: :operands_irq[0]:0x2
[   88.731316@0] hdmitx: cec: :key map:108
[   89.059311@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   89.463285@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   89.463299@0] hdmitx: cec: : Key pressed
[   89.463304@0] hdmitx: cec: :operands_irq[0]:0x4
[   89.463331@0] hdmitx: cec: :key map:106
[   89.798570@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   90.023635@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   90.023661@0] hdmitx: cec: : Key pressed
[   90.023682@0] hdmitx: cec: :operands_irq[0]:0x0
[   90.023733@0] hdmitx: cec: :key map:353
[   90.358881@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   92.045783@3] AO cpu stop ok.
[   92.046165@3] AO cpu runs ok.
[   92.046441@3] AO cpu stop ok.
[   92.046826@3] AO cpu runs ok.
[   96.653802@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   96.653805@0] hdmitx: cec: : Key pressed
[   96.653807@0] hdmitx: cec: :operands_irq[0]:0x0
[   96.653819@0] hdmitx: cec: :key map:353
[   97.001414@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   98.331185@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   98.331242@0] hdmitx: cec: : Key pressed
[   98.331279@0] hdmitx: cec: :operands_irq[0]:0x2
[   98.331352@0] hdmitx: cec: :key map:108
[   98.668284@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[   99.199496@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[   99.199602@0] hdmitx: cec: : Key pressed
[   99.199673@0] hdmitx: cec: :operands_irq[0]:0x2
[   99.199810@0] hdmitx: cec: :key map:108
[   99.529710@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  101.631147@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  101.631151@0] hdmitx: cec: : Key pressed
[  101.631155@0] hdmitx: cec: :operands_irq[0]:0x4
[  101.631173@0] hdmitx: cec: :key map:106
[  101.968372@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  102.515197@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  102.515251@0] hdmitx: cec: : Key pressed
[  102.515289@0] hdmitx: cec: :operands_irq[0]:0x2
[  102.515361@0] hdmitx: cec: :key map:108
[  102.852080@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  103.119822@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  103.119927@0] hdmitx: cec: : Key pressed
[  103.120000@0] hdmitx: cec: :operands_irq[0]:0x0
[  103.120137@0] hdmitx: cec: :key map:353
[  103.469273@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  103.933760@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  103.933865@0] hdmitx: cec: : Key pressed
[  103.933940@0] hdmitx: cec: :operands_irq[0]:0x0
[  103.934079@0] hdmitx: cec: :key map:353
[  104.267850@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  104.457603@1] RTL871X: nolinked power save leave
[  108.509152@1] RTL871X: nolinked power save enter
[  112.034355@1] RTL871X: nolinked power save leave
[  115.532806@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  115.532860@0] hdmitx: cec: : Key pressed
[  115.532896@0] hdmitx: cec: :operands_irq[0]:0x4
[  115.532968@0] hdmitx: cec: :key map:106
[  115.881781@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  116.053257@1] RTL871X: nolinked power save enter
[  116.311427@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  116.311481@0] hdmitx: cec: : Key pressed
[  116.311518@0] hdmitx: cec: :operands_irq[0]:0x0
[  116.311590@0] hdmitx: cec: :key map:353
[  116.648119@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  117.123801@0] hdmitx: cec: opcode:0x44, hdmitx_device->cec_func_config:0xf
[  117.123814@0] hdmitx: cec: : Key pressed
[  117.123822@0] hdmitx: cec: :operands_irq[0]:0x0
[  117.123840@0] hdmitx: cec: :key map:353
[  117.270278@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  117.448295@0] hdmitx: cec: opcode:0x45, hdmitx_device->cec_func_config:0xf
[  118.587548@3] wlan0: authenticate with 58:98:35:bc:bb:1e
[  118.652860@3] wlan0: send auth to 58:98:35:bc:bb:1e (try 1/3)
[  118.655978@0] wlan0: authenticated
[  118.672310@1] wlan0: associate with 58:98:35:bc:bb:1e (try 1/3)
[  118.675877@0] wlan0: RX AssocResp from 58:98:35:bc:bb:1e (capab=0x411 status=0 aid=4)
[  118.690806@3] wlan0: associated
[  139.368822@1] RTL871X: nolinked power save leave
[  141.334842@1] RTL871X: nolinked power save enter
[  177.553677@0] [aml-spdif-dai]aiu 958 playback disable
[  177.553720@2] ----aml_hw_iec958_init,runtime->rate=44100--
[  177.553730@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
[  177.553736@2] iec958 mode PCM16
[  177.553744@2] IEC958 16bit
[  177.553750@2] hdmitx: audio: aout notify rate 44100
[  177.553755@2] hdmitx: audio: aout notify size 16
[  177.553762@2] hdmitx: audio: audio channel num is 1
[  177.553770@2] hdmitx: audio: SPDIF
[  177.553782@2] hdmitx: audio: current VIC: 16
[  177.553786@2] hdmitx: audio: audio sample rate: 2
[  177.553790@2] hdmitx: audio: reset audio N para
[  177.553801@2] hdmitx: audio: PCM out to HDMI
[  177.553805@2] hdmitx: audio: i2s_to_spdif_flag:1
[  177.553809@2] hdmitx: audio: Enable audio spdif to HDMI
[  177.553816@2] hdmitx: audio: Audio Type: PCM
[  177.553858@2] hdmitx: audio: set audio param
[  177.553864@2] [aml-spdif-dai]spdif dma f0969000,phy addr 2d800000
[  177.553910@3] enter aml_set_bias_level level: 1
[  177.553936@3] enter aml_set_bias_level level: 2
[  187.554592@2] [aml-spdif-dai]enterd aml_spdif_play,set_clock:5,sample_rate=4
[  187.554622@2] audio_set_958_clk, freq=4,
[  187.554650@2] IEC958 16bit
[  187.554671@2] hdmitx: audio: aout notify rate 48000
[  187.554688@2] hdmitx: audio: aout notify size 16
[  187.554710@2] hdmitx: audio: audio channel num is 1
[  187.554733@2] hdmitx: audio: SPDIF
[  187.554762@2] hdmitx: audio: current VIC: 16
[  187.554777@2] hdmitx: audio: audio sample rate: 3
[  187.554792@2] hdmitx: audio: reset audio N para
[  187.554820@2] hdmitx: audio: PCM out to HDMI
[  187.554836@2] hdmitx: audio: i2s_to_spdif_flag:1
[  187.554851@2] hdmitx: audio: Enable audio spdif to HDMI
[  187.554871@2] hdmitx: audio: Audio Type: PCM
[  187.554955@2] hdmitx: audio: set audio param
[  187.554978@2] aml_i2s_close device type 2
[  192.559831@0] enter aml_set_bias_level level: 1
[  192.559842@0] enter aml_set_bias_level level: 2