Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-26-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #48-Ubuntu SMP Wed Nov 24 09:00:03 UTC 2010 (Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
- [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff90000 (usable)
- [ 0.000000] BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
- [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
- [ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] Scanning 0 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
- [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable)
- [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000006ff90000 (usable)
- [ 0.000000] modified: 000000006ff90000 - 000000006ffa8000 (ACPI data)
- [ 0.000000] modified: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
- [ 0.000000] modified: 000000006ffd0000 - 0000000070000000 (reserved)
- [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
- [ 0.000000] RAMDISK: 372f5000 - 37fefdbd
- [ 0.000000] Allocated new RAMDISK: 008e1000 - 015dbdbd
- [ 0.000000] Move RAMDISK from 00000000372f5000 - 0000000037fefdbc to 008e1000 - 015dbdbc
- [ 0.000000] ACPI: RSDP 000fb470 00024 (v02 ACPIAM)
- [ 0.000000] ACPI: XSDT 6ff90100 0005C (v01 041410 XSDT1753 20100414 MSFT 00000097)
- [ 0.000000] ACPI: FACP 6ff90290 000F4 (v03 041410 FACP1753 20100414 MSFT 00000097)
- [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
- [ 0.000000] ACPI: DSDT 6ff90450 0CE2A (v01 A1429 A1429001 00000001 INTL 20060113)
- [ 0.000000] ACPI: FACS 6ffa8000 00040
- [ 0.000000] ACPI: APIC 6ff90390 0007C (v01 041410 APIC1753 20100414 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 6ff90410 0003C (v01 041410 OEMMCFG 20100414 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 6ffa8040 00072 (v01 041410 OEMB1753 20100414 MSFT 00000097)
- [ 0.000000] ACPI: SRAT 6ff9f450 000C0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
- [ 0.000000] ACPI: HPET 6ff9f510 00038 (v01 041410 OEMHPET 20100414 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 6ff9f550 00544 (v01 A M I POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 903MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00011000 - 00017f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
- [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
- [ 0.000000] #5 [00008dd000 - 00008e029c] BRK ==> [00008dd000 - 00008e029c]
- [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
- [ 0.000000] #7 [00008e1000 - 00015dbdbd] NEW RAMDISK ==> [00008e1000 - 00015dbdbd]
- [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
- [ 0.000000] found SMP MP-table at [c00ff780] ff780
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0006ff90
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009e
- [ 0.000000] 0: 0x00000100 -> 0x0006ff90
- [ 0.000000] On node 0 totalpages: 458526
- [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c15dd200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 1808 pages used for memmap
- [ 0.000000] HighMem zone: 229506 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
- [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ff00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u524288
- [ 0.000000] pcpu-alloc: s36056 r0 d21288 u524288 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454942
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=53f9d5a5-f990-4125-a2ab-6ef32e40e25d ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 9172480 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0006ff90)
- [ 0.000000] Memory: 1786916k/1834560k available (4682k kernel code, 45840k reserved, 2121k data, 656k init, 925256k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
- [ 0.000000] .data : 0xc0592847 - 0xc07a4e68 (2121 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0592847 (4682 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:456
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] alloc irq_desc for 24 on node 0
- [ 0.000000] alloc kstat_irqs on node 0
- [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2511.149 MHz processor.
- [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5022.29 BogoMIPS (lpj=10044596)
- [ 0.004019] Security Framework initialized
- [ 0.004035] AppArmor: AppArmor initialized
- [ 0.004042] Mount-cache hash table entries: 512
- [ 0.004144] Initializing cgroup subsys ns
- [ 0.004147] Initializing cgroup subsys cpuacct
- [ 0.004151] Initializing cgroup subsys memory
- [ 0.004155] Initializing cgroup subsys devices
- [ 0.004158] Initializing cgroup subsys freezer
- [ 0.004160] Initializing cgroup subsys net_cls
- [ 0.004173] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.004176] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.004177] CPU: Physical Processor ID: 0
- [ 0.004179] CPU: Processor Core ID: 0
- [ 0.004182] mce: CPU supports 6 MCE banks
- [ 0.004195] Performance Events: AMD PMU driver.
- [ 0.004199] ... version: 0
- [ 0.004201] ... bit width: 48
- [ 0.004203] ... generic registers: 4
- [ 0.004204] ... value mask: 0000ffffffffffff
- [ 0.004206] ... max period: 00007fffffffffff
- [ 0.004208] ... fixed-purpose events: 0
- [ 0.004209] ... event mask: 000000000000000f
- [ 0.004213] Checking 'hlt' instruction... OK.
- [ 0.021810] ACPI: Core revision 20090903
- [ 0.036014] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.036018] ftrace: allocating 21794 entries in 43 pages
- [ 0.040061] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.040361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.080562] CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
- [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.168117] CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
- [ 0.168127] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.172066] Booting processor 2 APIC 0x2 ip 0x6000
- [ 0.008000] Initializing CPU#2
- [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 2
- [ 0.260069] CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
- [ 0.260080] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
- [ 0.264058] Booting processor 3 APIC 0x3 ip 0x6000
- [ 0.008000] Initializing CPU#3
- [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 3
- [ 0.352104] CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
- [ 0.352117] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
- [ 0.356012] Brought up 4 CPUs
- [ 0.356014] Total of 4 processors activated (20089.24 BogoMIPS).
- [ 0.356890] CPU0 attaching sched-domain:
- [ 0.356893] domain 0: span 0-3 level MC
- [ 0.356895] groups: 0 1 2 3
- [ 0.356900] CPU1 attaching sched-domain:
- [ 0.356901] domain 0: span 0-3 level MC
- [ 0.356903] groups: 1 2 3 0
- [ 0.356907] CPU2 attaching sched-domain:
- [ 0.356909] domain 0: span 0-3 level MC
- [ 0.356910] groups: 2 3 0 1
- [ 0.356914] CPU3 attaching sched-domain:
- [ 0.356916] domain 0: span 0-3 level MC
- [ 0.356917] groups: 3 0 1 2
- [ 0.356992] devtmpfs: initialized
- [ 0.356992] regulator: core version 0.5
- [ 0.356992] Time: 21:08:17 Date: 12/18/10
- [ 0.356992] NET: Registered protocol family 16
- [ 0.356992] EISA bus registered
- [ 0.356992] ACPI: bus type pci registered
- [ 0.356992] Trying to unpack rootfs image as initramfs...
- [ 0.356992] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.356992] PCI: Not using MMCONFIG.
- [ 0.356992] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
- [ 0.356992] PCI: Using configuration type 1 for base access
- [ 0.356992] PCI: Using configuration type 1 for extended access
- [ 0.357491] bio: create slab <bio-0> at 0
- [ 0.357491] ACPI: EC: Look up EC in DSDT
- [ 0.362362] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
- [ 0.362367] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c08d1804), AE_NOT_FOUND
- [ 0.362454] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
- [ 0.362458] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
- [ 0.362462] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c08d1804), AE_ALREADY_EXISTS
- [ 0.362466] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
- [ 0.362508] ACPI: Executed 3 blocks of module-level executable AML code
- [ 0.402525] ACPI: Interpreter enabled
- [ 0.402529] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.402551] ACPI: Using IOAPIC for interrupt routing
- [ 0.402599] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.407156] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.407158] PCI: Using MMCONFIG for extended config space
- [ 0.413818] ACPI Warning: Incorrect checksum in table [OEMB] - AE, should be A9 (20090903/tbutils-314)
- [ 0.413929] ACPI: No dock devices found.
- [ 0.414068] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.414188] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- [ 0.414191] pci 0000:00:0a.0: PME# disabled
- [ 0.414237] pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007]
- [ 0.414244] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003]
- [ 0.414251] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007]
- [ 0.414257] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003]
- [ 0.414264] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f]
- [ 0.414270] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff]
- [ 0.414288] pci 0000:00:11.0: set SATA to AHCI mode
- [ 0.414330] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff]
- [ 0.414381] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff]
- [ 0.414449] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe8ff800-0xfe8ff8ff]
- [ 0.414497] pci 0000:00:12.2: supports D1 D2
- [ 0.414499] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.414503] pci 0000:00:12.2: PME# disabled
- [ 0.414532] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff]
- [ 0.414583] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff]
- [ 0.414650] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8ff400-0xfe8ff4ff]
- [ 0.414698] pci 0000:00:13.2: supports D1 D2
- [ 0.414700] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.414704] pci 0000:00:13.2: PME# disabled
- [ 0.414812] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
- [ 0.414818] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
- [ 0.414824] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
- [ 0.414831] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
- [ 0.414837] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
- [ 0.414898] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
- [ 0.414938] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.414942] pci 0000:00:14.2: PME# disabled
- [ 0.415039] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe8fa000-0xfe8fafff]
- [ 0.415168] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.415172] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff]
- [ 0.415176] pci 0000:01:05.0: reg 18 32bit mmio: [0xfeaf0000-0xfeafffff]
- [ 0.415182] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe900000-0xfe9fffff]
- [ 0.415193] pci 0000:01:05.0: supports D1 D2
- [ 0.415209] pci 0000:01:05.1: reg 10 32bit mmio: [0xfeae8000-0xfeaebfff]
- [ 0.415226] pci 0000:01:05.1: supports D1 D2
- [ 0.415264] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
- [ 0.415267] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
- [ 0.415270] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.415302] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]
- [ 0.415317] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
- [ 0.415327] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
- [ 0.415333] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebf0000-0xfebfffff]
- [ 0.415361] pci 0000:02:00.0: supports D1 D2
- [ 0.415363] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.415367] pci 0000:02:00.0: PME# disabled
- [ 0.415423] pci 0000:00:0a.0: bridge io port: [0xe000-0xefff]
- [ 0.415426] pci 0000:00:0a.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
- [ 0.415429] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
- [ 0.415483] pci 0000:00:14.4: transparent bridge
- [ 0.415500] pci_bus 0000:00: on NUMA node 0
- [ 0.415504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.415696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.415768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
- [ 0.415836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
- [ 0.420009] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
- [ 0.420109] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
- [ 0.420207] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
- [ 0.420303] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
- [ 0.420399] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- [ 0.420500] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- [ 0.420597] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
- [ 0.420694] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- [ 0.420797] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.420800] vgaarb: loaded
- [ 0.420894] SCSI subsystem initialized
- [ 0.420908] libata version 3.00 loaded.
- [ 0.420908] usbcore: registered new interface driver usbfs
- [ 0.420908] usbcore: registered new interface driver hub
- [ 0.420908] usbcore: registered new device driver usb
- [ 0.420908] ACPI: WMI: Mapper loaded
- [ 0.420908] PCI: Using ACPI for IRQ routing
- [ 0.420908] NetLabel: Initializing
- [ 0.420908] NetLabel: domain hash size = 128
- [ 0.420908] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.420908] NetLabel: unlabeled traffic allowed by default
- [ 0.420908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
- [ 0.420908] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- [ 0.422237] Switching to clocksource tsc
- [ 0.423993] AppArmor: AppArmor Filesystem Enabled
- [ 0.423993] pnp: PnP ACPI init
- [ 0.423993] ACPI: bus type pnp registered
- [ 0.425783] pnp: PnP ACPI: found 14 devices
- [ 0.425785] ACPI: ACPI bus type pnp unregistered
- [ 0.425788] PnPBIOS: Disabled by ACPI PNP
- [ 0.425797] system 00:01: iomem range 0x70000000-0x7fffffff has been reserved
- [ 0.425804] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.425807] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.425813] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.425815] system 00:0a: ioport range 0x40b-0x40b has been reserved
- [ 0.425818] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
- [ 0.425820] system 00:0a: ioport range 0xc00-0xc01 has been reserved
- [ 0.425823] system 00:0a: ioport range 0xc14-0xc14 has been reserved
- [ 0.425825] system 00:0a: ioport range 0xc50-0xc51 has been reserved
- [ 0.425828] system 00:0a: ioport range 0xc52-0xc52 has been reserved
- [ 0.425830] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
- [ 0.425833] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
- [ 0.425835] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
- [ 0.425838] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
- [ 0.425840] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
- [ 0.425843] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
- [ 0.425846] system 00:0a: ioport range 0xcd8-0xcdf has been reserved
- [ 0.425848] system 00:0a: ioport range 0xb00-0xb3f has been reserved
- [ 0.425851] system 00:0a: ioport range 0x800-0x89f has been reserved
- [ 0.425853] system 00:0a: ioport range 0xb00-0xb0f has been reserved
- [ 0.425856] system 00:0a: ioport range 0xb20-0xb3f has been reserved
- [ 0.425858] system 00:0a: ioport range 0x900-0x90f has been reserved
- [ 0.425861] system 00:0a: ioport range 0x910-0x91f has been reserved
- [ 0.425864] system 00:0a: ioport range 0xfe00-0xfefe has been reserved
- [ 0.425867] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
- [ 0.425870] system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
- [ 0.425873] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
- [ 0.425877] system 00:0b: ioport range 0x230-0x23f has been reserved
- [ 0.425880] system 00:0b: ioport range 0x290-0x29f has been reserved
- [ 0.425882] system 00:0b: ioport range 0x300-0x30f has been reserved
- [ 0.425885] system 00:0b: ioport range 0xa30-0xa3f has been reserved
- [ 0.425890] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.425894] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
- [ 0.425897] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
- [ 0.425900] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.425903] system 00:0d: iomem range 0x100000-0x6fffffff could not be reserved
- [ 0.425905] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
- [ 0.460559] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.460562] pci 0000:00:01.0: IO window: 0xd000-0xdfff
- [ 0.460565] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
- [ 0.460569] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
- [ 0.460573] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
- [ 0.460575] pci 0000:00:0a.0: IO window: 0xe000-0xefff
- [ 0.460578] pci 0000:00:0a.0: MEM window: 0xfeb00000-0xfebfffff
- [ 0.460581] pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
- [ 0.460584] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
- [ 0.460586] pci 0000:00:14.4: IO window: disabled
- [ 0.460591] pci 0000:00:14.4: MEM window: disabled
- [ 0.460594] pci 0000:00:14.4: PREFETCH window: disabled
- [ 0.460610] alloc irq_desc for 18 on node -1
- [ 0.460612] alloc kstat_irqs on node -1
- [ 0.460616] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.460619] pci 0000:00:0a.0: setting latency timer to 64
- [ 0.460627] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.460630] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.460632] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
- [ 0.460634] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
- [ 0.460637] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.460639] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
- [ 0.460641] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
- [ 0.460644] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
- [ 0.460646] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
- [ 0.460648] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
- [ 0.460680] NET: Registered protocol family 2
- [ 0.460765] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.461025] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.461535] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.461788] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.461790] TCP reno registered
- [ 0.461857] NET: Registered protocol family 1
- [ 0.616194] pci 0000:01:05.0: Boot video device
- [ 0.616461] cpufreq-nforce2: No nForce2 chipset.
- [ 0.616481] Scanning for low memory corruption every 60 seconds
- [ 0.616558] audit: initializing netlink socket (disabled)
- [ 0.616567] type=2000 audit(1292706496.616:1): initialized
- [ 0.623598] highmem bounce pool size: 64 pages
- [ 0.623602] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.624744] VFS: Disk quotas dquot_6.5.2
- [ 0.624789] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.625213] fuse init (API version 7.13)
- [ 0.625271] msgmni has been set to 1685
- [ 0.625499] alg: No test for stdrng (krng)
- [ 0.625581] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.625585] io scheduler noop registered
- [ 0.625587] io scheduler anticipatory registered
- [ 0.625588] io scheduler deadline registered
- [ 0.625618] io scheduler cfq registered (default)
- [ 0.625725] alloc irq_desc for 25 on node -1
- [ 0.625727] alloc kstat_irqs on node -1
- [ 0.625734] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
- [ 0.625739] pcieport 0000:00:0a.0: setting latency timer to 64
- [ 0.625792] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.625809] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.625884] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.625888] ACPI: Power Button [PWRB]
- [ 0.625921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.625924] ACPI: Power Button [PWRF]
- [ 0.626435] processor LNXCPU:00: registered as cooling_device0
- [ 0.626654] processor LNXCPU:01: registered as cooling_device1
- [ 0.626867] processor LNXCPU:02: registered as cooling_device2
- [ 0.627074] processor LNXCPU:03: registered as cooling_device3
- [ 0.629398] isapnp: Scanning for PnP cards...
- [ 0.630371] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.630479] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.630761] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.631515] brd: module loaded
- [ 0.631828] loop: module loaded
- [ 0.631887] input: Macintosh mouse button emulation as /devices/virtual/input/input2
- [ 0.631986] alloc irq_desc for 16 on node -1
- [ 0.631987] alloc kstat_irqs on node -1
- [ 0.631994] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.632020] pata_acpi 0000:00:14.1: setting latency timer to 64
- [ 0.632248] Fixed MDIO Bus: probed
- [ 0.632273] PPP generic driver version 2.4.2
- [ 0.632295] tun: Universal TUN/TAP device driver, 1.6
- [ 0.632297] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.632352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.632366] alloc irq_desc for 17 on node -1
- [ 0.632367] alloc kstat_irqs on node -1
- [ 0.632371] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.632382] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 0.632412] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 0.632439] ehci_hcd 0000:00:12.2: debug port 1
- [ 0.632459] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
- [ 0.644191] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 0.644258] usb usb1: configuration #1 chosen from 1 choice
- [ 0.644279] hub 1-0:1.0: USB hub found
- [ 0.644285] hub 1-0:1.0: 6 ports detected
- [ 0.644334] alloc irq_desc for 19 on node -1
- [ 0.644335] alloc kstat_irqs on node -1
- [ 0.644339] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.644348] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 0.644369] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 0.644394] ehci_hcd 0000:00:13.2: debug port 1
- [ 0.644409] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
- [ 0.656187] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 0.656235] usb usb2: configuration #1 chosen from 1 choice
- [ 0.656253] hub 2-0:1.0: USB hub found
- [ 0.656258] hub 2-0:1.0: 6 ports detected
- [ 0.656304] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.656314] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.656326] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 0.656346] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 0.656365] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
- [ 0.716217] usb usb3: configuration #1 chosen from 1 choice
- [ 0.716236] hub 3-0:1.0: USB hub found
- [ 0.716244] hub 3-0:1.0: 3 ports detected
- [ 0.716279] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.716287] ohci_hcd 0000:00:12.1: OHCI Host Controller
- [ 0.716309] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
- [ 0.716325] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
- [ 0.730267] Freeing initrd memory: 13291k freed
- [ 0.776234] usb usb4: configuration #1 chosen from 1 choice
- [ 0.776254] hub 4-0:1.0: USB hub found
- [ 0.776266] hub 4-0:1.0: 3 ports detected
- [ 0.776307] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.776316] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 0.776341] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 0.776361] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
- [ 0.836230] usb usb5: configuration #1 chosen from 1 choice
- [ 0.836247] hub 5-0:1.0: USB hub found
- [ 0.836257] hub 5-0:1.0: 3 ports detected
- [ 0.836295] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.836302] ohci_hcd 0000:00:13.1: OHCI Host Controller
- [ 0.836329] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
- [ 0.836342] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000
- [ 0.896233] usb usb6: configuration #1 chosen from 1 choice
- [ 0.896250] hub 6-0:1.0: USB hub found
- [ 0.896257] hub 6-0:1.0: 3 ports detected
- [ 0.896296] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.896305] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 0.896325] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
- [ 0.896338] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000
- [ 0.956277] usb usb7: configuration #1 chosen from 1 choice
- [ 0.956287] usb 1-2: new high speed USB device using ehci_hcd and address 2
- [ 0.956294] hub 7-0:1.0: USB hub found
- [ 0.956302] hub 7-0:1.0: 2 ports detected
- [ 0.956337] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.956400] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.956751] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.956757] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.956858] mice: PS/2 mouse device common for all mice
- [ 0.956935] rtc_cmos 00:03: RTC can wake from S4
- [ 0.956963] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.956986] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.957062] device-mapper: uevent: version 1.0.3
- [ 0.957155] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.957309] device-mapper: multipath: version 1.1.0 loaded
- [ 0.957312] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.957454] EISA: Probing bus 0 at eisa.0
- [ 0.957485] Cannot allocate resource for EISA slot 8
- [ 0.957486] EISA: Detected 0 cards.
- [ 0.957646] cpuidle: using governor ladder
- [ 0.957647] cpuidle: using governor menu
- [ 0.958028] TCP cubic registered
- [ 0.958155] NET: Registered protocol family 10
- [ 0.958550] lo: Disabled Privacy Extensions
- [ 0.958828] NET: Registered protocol family 17
- [ 0.958860] powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
- [ 0.958899] powernow-k8: 0 : pstate 0 (2500 MHz)
- [ 0.958901] powernow-k8: 1 : pstate 1 (1250 MHz)
- [ 0.983455] isapnp: No Plug & Play device found
- [ 0.983613] Using IPI No-Shortcut mode
- [ 0.983669] PM: Resume from disk failed.
- [ 0.983678] registered taskstats version 1
- [ 0.983940] Magic number: 6:682:146
- [ 0.983946] hub 1-0:1.0: hash matches
- [ 0.983982] acpi device:17: hash matches
- [ 0.984016] rtc_cmos 00:03: setting system clock to 2010-12-18 21:08:18 UTC (1292706498)
- [ 0.984019] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.984020] EDD information not available.
- [ 0.984055] Freeing unused kernel memory: 656k freed
- [ 0.984398] Write protecting the kernel text: 4684k
- [ 0.984432] Write protecting the kernel read-only data: 1840k
- [ 1.000826] ramzswap: disk size set to 901104 kB
- [ 1.004985] udev: starting version 151
- [ 1.023851] Adding 901100k swap on /dev/ramzswap0. Priority:100 extents:1 across:901100k SS
- [ 1.024104] ahci 0000:00:11.0: version 3.0
- [ 1.024124] alloc irq_desc for 22 on node -1
- [ 1.024126] alloc kstat_irqs on node -1
- [ 1.024133] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.024244] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 1.024247] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 1.026841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.026855] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.026882] r8169 0000:02:00.0: setting latency timer to 64
- [ 1.026914] alloc irq_desc for 26 on node -1
- [ 1.026916] alloc kstat_irqs on node -1
- [ 1.026926] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
- [ 1.027420] eth0: RTL8168d/8111d at 0xf82fc000, 48:5b:39:88:fd:f8, XID 083000c0 IRQ 26
- [ 1.032067] scsi0 : ahci
- [ 1.044413] Linux agpgart interface v0.103
- [ 1.045481] scsi1 : ahci
- [ 1.053930] scsi2 : ahci
- [ 1.056261] scsi3 : ahci
- [ 1.056329] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
- [ 1.056333] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
- [ 1.056336] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
- [ 1.056340] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
- [ 1.056474] scsi4 : pata_atiixp
- [ 1.056927] scsi5 : pata_atiixp
- [ 1.058013] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- [ 1.058015] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- [ 1.061014] [drm] Initialized drm 1.1.0 20060810
- [ 1.095494] usb 1-2: configuration #1 chosen from 1 choice
- [ 1.316034] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.316080] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.376018] usb 2-6: new high speed USB device using ehci_hcd and address 3
- [ 1.480030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.480050] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.480244] ata3.00: ATAPI: HP DVD Writer 1260d, KH25, max UDMA/100
- [ 1.480917] ata3.00: configured for UDMA/100
- [ 1.481495] ata1.00: ATA-8: WDC WD7500AVDS-63U8B0, 01.00A01, max UDMA/133
- [ 1.481498] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.483091] ata1.00: configured for UDMA/133
- [ 1.497132] scsi 0:0:0:0: Direct-Access ATA WDC WD7500AVDS-6 01.0 PQ: 0 ANSI: 5
- [ 1.497266] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.497297] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
- [ 1.497350] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.497352] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.497368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.497480] sda:
- [ 1.498386] scsi 2:0:0:0: CD-ROM HP DVD Writer 1260d KH25 PQ: 0 ANSI: 5
- [ 1.503857] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.503860] Uniform CD-ROM driver Revision: 3.20
- [ 1.503929] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 1.503973] sr 2:0:0:0: Attached scsi generic sg1 type 5
- [ 1.505645] sda1 sda2 <
- [ 1.511493] usb 2-6: configuration #1 chosen from 1 choice
- [ 1.517384] Initializing USB Mass Storage driver...
- [ 1.517473] scsi6 : SCSI emulation for USB Mass Storage devices
- [ 1.517544] usb-storage: device found at 3
- [ 1.517546] usb-storage: waiting for device to settle before scanning
- [ 1.517555] usbcore: registered new interface driver usb-storage
- [ 1.517557] USB Mass Storage support registered.
- [ 1.539300] sda5 >
- [ 1.539627] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.701029] [drm] radeon defaulting to kernel modesetting.
- [ 1.701031] [drm] radeon kernel modesetting enabled.
- [ 1.701090] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.701094] radeon 0000:01:05.0: setting latency timer to 64
- [ 1.702327] [drm] radeon: Initializing kernel modesetting.
- [ 1.702457] [drm] register mmio base: 0xFEAF0000
- [ 1.702460] [drm] register mmio size: 65536
- [ 1.703617] ATOM BIOS: B43106
- [ 1.703632] [drm] Clocks initialized !
- [ 1.704739] [drm] Detected VRAM RAM=256M, BAR=256M
- [ 1.704743] [drm] RAM width 32bits DDR
- [ 1.704834] [TTM] Zone kernel: Available graphics memory: 438478 kiB.
- [ 1.704836] [TTM] Zone highmem: Available graphics memory: 901106 kiB.
- [ 1.704852] [drm] radeon: 256M of VRAM memory ready
- [ 1.704853] [drm] radeon: 512M of GTT memory ready.
- [ 1.704883] [drm] radeon: irq initialized.
- [ 1.704885] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 1.705124] [drm] Loading RS780 Microcode
- [ 1.705128] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
- [ 1.706334] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
- [ 1.707563] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
- [ 1.741576] [drm] ring test succeeded in 0 usecs
- [ 1.741706] [drm] radeon: ib pool ready.
- [ 1.741758] [drm] ib test succeeded in 0 usecs
- [ 1.741760] [drm] Enabling audio support
- [ 1.741861] [drm] Radeon Display Connectors
- [ 1.741863] [drm] Connector 0:
- [ 1.741864] [drm] VGA
- [ 1.741866] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- [ 1.741868] [drm] Encoders:
- [ 1.741869] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 1.741871] [drm] Connector 1:
- [ 1.741872] [drm] HDMI-A
- [ 1.741873] [drm] HPD3
- [ 1.741875] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
- [ 1.741876] [drm] Encoders:
- [ 1.741877] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
- [ 1.773022] usb 6-2: new low speed USB device using ohci_hcd and address 2
- [ 1.943328] usb 6-2: configuration #1 chosen from 1 choice
- [ 1.960108] usbcore: registered new interface driver hiddev
- [ 1.960188] usbcore: registered new interface driver usbhid
- [ 1.960190] usbhid: v2.6:USB HID core driver
- [ 1.965442] input: MLK 2.4Ghz wireless combo sets as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3
- [ 1.965511] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK 2.4Ghz wireless combo sets] on usb-0000:00:13.1-2/input0
- [ 1.972244] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
- [ 1.972828] input: MLK 2.4Ghz wireless combo sets as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input4
- [ 1.973031] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK 2.4Ghz wireless combo sets] on usb-0000:00:13.1-2/input1
- [ 2.058314] [drm] fb mappable at 0xD0141000
- [ 2.058316] [drm] vram apper at 0xD0000000
- [ 2.058317] [drm] size 3686400
- [ 2.058318] [drm] fb depth is 24
- [ 2.058320] [drm] pitch is 5120
- [ 2.058369] fb0: radeondrmfb frame buffer device
- [ 2.058370] registered panic notifier
- [ 2.058374] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
- [ 2.059887] vga16fb: initializing
- [ 2.059890] vga16fb: mapped to 0xc00a0000
- [ 2.059894] vga16fb: not registering due to another framebuffer present
- [ 2.084838] Console: switching to colour frame buffer device 160x45
- [ 2.216019] usb 3-3: new full speed USB device using ohci_hcd and address 2
- [ 2.384246] usb 3-3: config 1 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 32
- [ 2.384250] usb 3-3: config 1 interface 0 altsetting 0 endpoint 0x82 has an invalid bInterval 0, changing to 32
- [ 2.392311] usb 3-3: configuration #1 chosen from 1 choice
- [ 2.493433] xor: automatically using best checksumming function: pIII_sse
- [ 2.512004] pIII_sse : 10270.000 MB/sec
- [ 2.512006] xor: using function: pIII_sse (10270.000 MB/sec)
- [ 2.514532] device-mapper: dm-raid45: initialized v0.2594b
- [ 2.833681] EXT4-fs (sda1): mounted filesystem with ordered data mode
- [ 4.753649] Adding 5277688k swap on /dev/sda5. Priority:-1 extents:1 across:5277688k
- [ 5.095529] udev: starting version 151
- [ 6.165667] type=1505 audit(1292706503.680:2): operation="profile_load" pid=567 name="/sbin/dhclient3"
- [ 6.165911] type=1505 audit(1292706503.680:3): operation="profile_load" pid=567 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 6.166054] type=1505 audit(1292706503.680:4): operation="profile_load" pid=567 name="/usr/lib/connman/scripts/dhclient-script"
- [ 6.343632] lp: driver loaded but no devices found
- [ 6.376424] lirc_dev: IR Remote Control driver registered, major 61
- [ 6.405377] parport_pc 00:06: reported by Plug and Play ACPI
- [ 6.405431] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 6.427431] ppdev: user-space parallel port driver
- [ 6.427941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 6.434124] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
- [ 6.434127] lirc_mceusb: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>, Dan Conti <dconti@acm.wwu.edu>
- [ 6.452188] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
- [ 6.452191] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 6.492192] lp0: using parport0 (interrupt-driven).
- [ 6.517148] usb-storage: device scan complete
- [ 6.517757] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
- [ 6.518153] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 6.519375] sd 6:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
- [ 6.519872] sd 6:0:0:0: [sdb] Write Protect is off
- [ 6.519874] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 6.519876] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 6.523116] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 6.523120] sdb: sdb1
- [ 6.524995] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 6.524998] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 6.569025] usb 3-3: reset full speed USB device using ohci_hcd and address 2
- [ 6.630413] cfg80211: Calling CRDA to update world regulatory domain
- [ 6.731321] lirc_dev: lirc_register_driver: sample_rate: 0
- [ 6.735312] lirc_mceusb[2]: Topseed Technology Corp. eHome Infrared Transceiver on usb3:2
- [ 6.735346] usbcore: registered new interface driver lirc_mceusb
- [ 6.797376] type=1505 audit(1292706504.312:5): operation="profile_load" pid=645 name="/usr/sbin/ntpd"
- [ 7.513363] cfg80211: World regulatory domain updated:
- [ 7.513366] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 7.513369] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.513372] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.513374] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 7.513376] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.513378] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 7.572786] Linux video capture interface: v2.00
- [ 7.888364] phy0: Selected rate control algorithm 'minstrel'
- [ 7.888994] phy0: hwaddr 00:e0:4c:03:fd:0b, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
- [ 7.899760] rtl8187: Customer ID is 0x00
- [ 7.899798] Registered led device: rtl8187-phy0::tx
- [ 7.899815] Registered led device: rtl8187-phy0::rx
- [ 7.900251] rtl8187: wireless switch is on
- [ 7.900279] usbcore: registered new interface driver rtl8187
- [ 7.998889] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 8.404972] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 8.404997] HDA Intel 0000:01:05.1: setting latency timer to 64
- [ 11.317464] type=1505 audit(1292706508.831:6): operation="profile_replace" pid=946 name="/sbin/dhclient3"
- [ 11.317713] type=1505 audit(1292706508.831:7): operation="profile_replace" pid=946 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 11.317853] type=1505 audit(1292706508.831:8): operation="profile_replace" pid=946 name="/usr/lib/connman/scripts/dhclient-script"
- [ 11.318360] type=1505 audit(1292706508.831:9): operation="profile_replace" pid=950 name="/usr/sbin/ntpd"
- [ 11.402203] type=1505 audit(1292706508.916:10): operation="profile_load" pid=947 name="/usr/bin/evince"
- [ 11.405479] type=1505 audit(1292706508.920:11): operation="profile_load" pid=947 name="/usr/bin/evince-previewer"
- [ 11.407314] type=1505 audit(1292706508.920:12): operation="profile_load" pid=947 name="/usr/bin/evince-thumbnailer"
- [ 11.454437] type=1505 audit(1292706508.967:13): operation="profile_load" pid=951 name="/usr/sbin/tcpdump"
- [ 11.454962] type=1505 audit(1292706508.967:14): operation="profile_load" pid=949 name="/usr/sbin/mysqld"
- [ 12.347378] r8169: eth0: link down
- [ 12.347560] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 13.857578] type=1505 audit(1292706511.372:15): operation="profile_replace" pid=1157 name="/usr/sbin/mysqld"
- [ 14.354048] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 19.525482] CPU0 attaching NULL sched-domain.
- [ 19.525487] CPU1 attaching NULL sched-domain.
- [ 19.525490] CPU2 attaching NULL sched-domain.
- [ 19.525492] CPU3 attaching NULL sched-domain.
- [ 19.565062] CPU0 attaching sched-domain:
- [ 19.565065] domain 0: span 0-3 level MC
- [ 19.565067] groups: 0 1 2 3
- [ 19.565072] CPU1 attaching sched-domain:
- [ 19.565074] domain 0: span 0-3 level MC
- [ 19.565076] groups: 1 2 3 0
- [ 19.565080] CPU2 attaching sched-domain:
- [ 19.565081] domain 0: span 0-3 level MC
- [ 19.565083] groups: 2 3 0 1
- [ 19.565087] CPU3 attaching sched-domain:
- [ 19.565088] domain 0: span 0-3 level MC
- [ 19.565090] groups: 3 0 1 2
- [ 35.604777] wlan0: deauthenticating from 00:24:01:cf:24:4d by local choice (reason=3)
- [ 35.713347] wlan0: direct probe to AP 00:24:01:cf:24:4d (try 1)
- [ 35.717600] wlan0: direct probe responded
- [ 35.717602] wlan0: authenticate with AP 00:24:01:cf:24:4d (try 1)
- [ 35.719098] wlan0: authenticated
- [ 35.719116] wlan0: associate with AP 00:24:01:cf:24:4d (try 1)
- [ 35.723220] wlan0: RX AssocResp from 00:24:01:cf:24:4d (capab=0x421 status=0 aid=1)
- [ 35.723222] wlan0: associated
- [ 35.725140] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement