API tools faq
paste
Guest User

Untitled

a guest
Dec 28th, 2014
232
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.25 KB | None | 0 0
raw download clone embed print report
  1. sudo smartctl -a /dev/sda
  2. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-28-generic] (local build)
  3. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Hitachi Deskstar P7K500
  7. Device Model: Hitachi HDP725050GLA360
  8. Serial Number: GEA564RJ2961TA
  9. LU WWN Device Id: 5 000cca 357e05d16
  10. Firmware Version: GM4OA5CA
  11. User Capacity: 500 106 780 160 bytes [500 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: 7200 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 4
  16. SATA Version is: SATA 2.6, 3.0 Gb/s
  17. Local Time is: Sun Dec 28 14:00:50 2014 SAMT
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x84) Offline data collection activity
  26. was suspended by an interrupting command from host.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 7890) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 131) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 139
  61. 3 Spin_Up_Time 0x0007 123 123 024 Pre-fail Always - 320 (Average 303)
  62. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3270
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  65. 8 Seek_Time_Performance 0x0005 129 129 020 Pre-fail Offline - 30
  66. 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 22104
  67. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3232
  69. 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3273
  70. 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3273
  71. 194 Temperature_Celsius 0x0002 153 153 000 Old_age Always - 39 (Min/Max 17/53)
  72. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 11
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 131 (device log contains only the most recent five errors)
  79. CR = Command Register [HEX]
  80. FR = Features Register [HEX]
  81. SC = Sector Count Register [HEX]
  82. SN = Sector Number Register [HEX]
  83. CL = Cylinder Low Register [HEX]
  84. CH = Cylinder High Register [HEX]
  85. DH = Device/Head Register [HEX]
  86. DC = Device Command Register [HEX]
  87. ER = Error register [HEX]
  88. ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 131 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
  94. When the command that caused the error occurred, the device was active or idle.
  95.  
  96. After command completion occurred, registers were:
  97. ER ST SC SN CL CH DH
  98. -- -- -- -- -- -- --
  99. 40 51 06 41 c4 42 e7 Error: UNC 6 sectors at LBA = 0x0742c441 = 121816129
  100.  
  101. Commands leading to the command that caused the error were:
  102. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  103. -- -- -- -- -- -- -- -- ---------------- --------------------
  104. 25 00 08 3f c4 42 e0 00 02:03:33.800 READ DMA EXT
  105. 35 00 08 3f 00 5e e0 00 02:03:33.800 WRITE DMA EXT
  106. 25 00 01 00 00 00 e0 00 02:03:33.800 READ DMA EXT
  107. 35 00 e1 ef 64 5d e0 00 02:03:33.800 WRITE DMA EXT
  108. 35 00 00 ef 63 5d e0 00 02:03:33.800 WRITE DMA EXT
  109.  
  110. Error 130 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 40 51 06 41 c4 42 e7 Error: UNC 6 sectors at LBA = 0x0742c441 = 121816129
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. 25 00 08 3f c4 42 e0 00 02:03:29.500 READ DMA EXT
  122. 35 00 10 97 9b 60 e0 00 02:03:29.500 WRITE DMA EXT
  123. 35 00 38 57 a1 5f e0 00 02:03:29.500 WRITE DMA EXT
  124. 25 00 01 ef 60 5d e0 00 02:03:29.500 READ DMA EXT
  125. 35 00 08 67 a0 77 e0 00 02:03:29.500 WRITE DMA EXT
  126.  
  127. Error 129 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
  128. When the command that caused the error occurred, the device was active or idle.
  129.  
  130. After command completion occurred, registers were:
  131. ER ST SC SN CL CH DH
  132. -- -- -- -- -- -- --
  133. 40 51 06 41 c4 42 e7 Error: UNC 6 sectors at LBA = 0x0742c441 = 121816129
  134.  
  135. Commands leading to the command that caused the error were:
  136. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  137. -- -- -- -- -- -- -- -- ---------------- --------------------
  138. 25 00 08 3f c4 42 e0 00 02:03:25.200 READ DMA EXT
  139. 35 00 18 1f 9b 60 e0 00 02:03:25.200 WRITE DMA EXT
  140. 35 00 10 47 a1 5f e0 00 02:03:25.200 WRITE DMA EXT
  141. 35 00 08 9f db 3e e0 00 02:03:25.200 WRITE DMA EXT
  142. ea 00 00 00 00 00 a0 00 02:03:25.100 FLUSH CACHE EXT
  143.  
  144. Error 128 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
  145. When the command that caused the error occurred, the device was active or idle.
  146.  
  147. After command completion occurred, registers were:
  148. ER ST SC SN CL CH DH
  149. -- -- -- -- -- -- --
  150. 40 51 06 41 c4 42 e7 Error: UNC 6 sectors at LBA = 0x0742c441 = 121816129
  151.  
  152. Commands leading to the command that caused the error were:
  153. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  154. -- -- -- -- -- -- -- -- ---------------- --------------------
  155. 25 00 08 3f c4 42 e0 00 02:03:20.700 READ DMA EXT
  156. 35 00 08 07 9b 60 e0 00 02:03:20.700 WRITE DMA EXT
  157. 35 00 08 37 00 5e e0 00 02:03:20.700 WRITE DMA EXT
  158. 35 00 08 9f db 3e e0 00 02:03:20.700 WRITE DMA EXT
  159. 35 00 74 af 9c 05 e0 00 02:03:20.700 WRITE DMA EXT
  160.  
  161. Error 127 occurred at disk power-on lifetime: 2560 hours (106 days + 16 hours)
  162. When the command that caused the error occurred, the device was active or idle.
  163.  
  164. After command completion occurred, registers were:
  165. ER ST SC SN CL CH DH
  166. -- -- -- -- -- -- --
  167. 40 51 06 41 c4 42 e7 Error: UNC 6 sectors at LBA = 0x0742c441 = 121816129
  168.  
  169. Commands leading to the command that caused the error were:
  170. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  171. -- -- -- -- -- -- -- -- ---------------- --------------------
  172. 25 00 08 3f c4 42 e0 00 02:03:16.300 READ DMA EXT
  173. 35 00 08 47 00 5e e0 00 02:03:16.300 WRITE DMA EXT
  174. ea 00 00 00 00 00 a0 00 02:03:16.200 FLUSH CACHE EXT
  175. 25 00 80 cf 76 33 e0 00 02:03:16.200 READ DMA EXT
  176. 25 00 01 6f 58 5d e0 00 02:03:16.100 READ DMA EXT
  177.  
  178. SMART Self-test log structure revision number 1
  179. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  180.  
  181.  
  182. SMART Selective self-test log data structure revision number 1
  183. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  184. 1 0 0 Not_testing
  185. 2 0 0 Not_testing
  186. 3 0 0 Not_testing
  187. 4 0 0 Not_testing
  188. 5 0 0 Not_testing
  189. Selective self-test flags (0x0):
  190. After scanning selected spans, do NOT read-scan remainder of disk.
  191. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!