API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 18th, 2013
169
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 105.03 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49)
  3. Board: Cubieboard2
  4. DRAM: 1024MB
  5. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  6. SUNXI SD/MMC: 0
  7.  
  8.  
  9. U-Boot 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49) Allwinner Technoloy
  10.  
  11. CPU: Allwinner A20 (SUN7I)
  12. Board: Cubieboard2
  13. I2C: ready
  14. DRAM: 1 GiB
  15. MMC: SUNXI SD/MMC: 0
  16. *** Warning - bad CRC, using default environment
  17.  
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: emac
  22. Hit any key to stop autoboot: 0
  23. reading uEnv.txt
  24. 260 bytes read in 5 ms (50.8 KiB/s)
  25. Loaded environment from uEnv.txt
  26. reading boot.scr
  27. ** Unable to read file boot.scr **
  28. Failed to mount ext2 filesystem...
  29. ** Unrecognized filesystem type **
  30. Failed to mount ext2 filesystem...
  31. ** Unrecognized filesystem type **
  32. Failed to mount ext2 filesystem...
  33. ** Unrecognized filesystem type **
  34. reading script.bin
  35. 45088 bytes read in 9 ms (4.8 MiB/s)
  36. reading uImage
  37. 3887904 bytes read in 183 ms (20.3 MiB/s)
  38. ## Booting kernel from Legacy Image at 48000000 ...
  39. Image Name:
  40. Created: 2013-09-18 9:15:49 UTC
  41. Image Type: ARM Linux Kernel Image (uncompressed)
  42. Data Size: 3887840 Bytes = 3.7 MiB
  43. Load Address: 40008000
  44. Entry Point: 40008000
  45. Verifying Checksum ... OK
  46. Loading Kernel Image ... OK
  47. OK
  48.  
  49. Starting kernel ...
  50.  
  51. [ 0.000000] Booting Linux on physical CPU 0
  52. [ 0.000000] Initializing cgroup subsys cpuset
  53. [ 0.000000] Initializing cgroup subsys cpu
  54. [ 0.000000] Linux version 3.3.0 (rolivo@build) (gcc version 4.6.3 20120201 (3
  55. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
  56. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
  57. [ 0.000000] Machine: sun7i
  58. [ 0.000000] [sun7i_fixup]: From boot, get meminfo:
  59. [ 0.000000] Start: 0x40000000
  60. [ 0.000000] Size: 1024MB
  61. [ 0.000000] memory reserved(in bytes):
  62. [ 0.000000] : 0x43000000, 0x00010000
  63. [ 0.000000] : 0x52000000, 0x00020000
  64. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  65. [ 0.000000] On node 0 totalpages: 216064
  66. [ 0.000000] free_area_init_node: node 0, pgdat c077dc00, node_mem_map d000000
  67. [ 0.000000] DMA zone: 576 pages used for memmap
  68. [ 0.000000] DMA zone: 0 pages reserved
  69. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  70. [ 0.000000] Normal zone: 1134 pages used for memmap
  71. [ 0.000000] Normal zone: 81810 pages, LIFO batch:15
  72. [ 0.000000] HighMem zone: 594 pages used for memmap
  73. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  74. [ 0.000000] [scu_get_core_count] cores=1800001
  75. [ 0.000000] sun7i_init_early: enter
  76. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0908000 s5504 r8192 d14976 u32768
  77. [ 0.000000] pcpu-alloc: s5504 r8192 d14976 u32768 alloc=8*4096
  78. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  79. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
  80. [ 0.000000] Kernel command line: console=ttyS0,115200 root= loglevel=8 panic9
  81. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  82. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  83. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  84. [ 0.000000] Memory: 64MB 780MB = 844MB total
  85. [ 0.000000] Memory: 844956k/844956k available, 203620k reserved, 270336K higm
  86. [ 0.000000] Virtual kernel memory layout:
  87. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  88. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  89. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  90. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  91. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  92. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  93. [ 0.000000] .text : 0xc0008000 - 0xc06fd7ac (7126 kB)
  94. [ 0.000000] .init : 0xc06fe000 - 0xc072f580 ( 198 kB)
  95. [ 0.000000] .data : 0xc0730000 - 0xc077eb20 ( 315 kB)
  96. [ 0.000000] .bss : 0xc077eb44 - 0xc08c9cf8 (1325 kB)
  97. [ 0.000000] Preemptible hierarchical RCU implementation.
  98. [ 0.000000] NR_IRQS:160
  99. [ 0.000000] aw_clkevt_init: timer base 0xf000cc00
  100. [ 0.000000] [aw_delay]: It is use use_time_delay function!
  101. [ 0.000000] aw_clksrc_init(96)
  102. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 1789s
  103. [ 0.000000] aw_clksrc_init(120)
  104. [ 0.000000] Architected local timer running at 24.00MHz.
  105. [ 0.000000] Console: colour dummy device 80x30
  106. [ 0.000474] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  107. [ 0.059963] pid_max: default: 32768 minimum: 301
  108. [ 0.060346] Mount-cache hash table entries: 512
  109. [ 0.061025] CPU: Testing write buffer coherency: ok
  110. [ 0.061330] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  111. [ 0.061419] Setting up static identity map for 0x404f8b80 - 0x404f8bd8
  112. [ 0.174265] CPU1: Booted secondary processor
  113. [ 0.231620] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  114. [ 0.231710] Brought up 2 CPUs
  115. [ 0.231721] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  116. [ 0.232601] devtmpfs: initialized
  117. [ 0.236686] script_init enter!
  118. [ 0.237520] script_init exit!
  119. [ 0.238192] kworker/u:0 used greatest stack depth: 6576 bytes left
  120. [ 0.239246] print_constraints: dummy:
  121. [ 0.239911] NET: Registered protocol family 16
  122. [ 0.240215] sunxi_dump_init success
  123. [ 0.241622] kworker/u:0 used greatest stack depth: 6408 bytes left
  124. [ 0.242074] sun7i_init: enter
  125. [ 0.242670] [ccu-inf] aw clock manager init
  126. [ 0.242683] [ccu-inf] aw_ccu_init
  127. [ 0.242885] [ccu-inf] script config pll3 to 297MHz
  128. [ 0.242900] [ccu-inf] script config pll4 to 300MHz
  129. [ 0.242911] [ccu-inf] script config pll6 to 600MHz
  130. [ 0.242922] [ccu-inf] script config pll7 to 297MHz
  131. [ 0.242932] [ccu-inf] script config pll8 to 336MHz
  132. [ 0.243526] axp config [pmu_para] [pmu_used] : 1
  133. [ 0.243537] axp config [pmu_para] [pmu_twi_id] : 0
  134. [ 0.243547] axp config [pmu_para] [pmu_irq_id] : 32
  135. [ 0.243556] axp config [pmu_para] [pmu_twi_addr] : 52
  136. [ 0.243565] axp config [pmu_para] [pmu_battery_rdc] : 120
  137. [ 0.243575] axp config [pmu_para] [pmu_battery_cap] : 2100
  138. [ 0.243585] axp config [pmu_para] [pmu_init_chgcur] : 300
  139. [ 0.243595] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
  140. [ 0.243605] axp config [pmu_para] [pmu_resume_chgcur] : 300
  141. [ 0.243615] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
  142. [ 0.243625] axp config [pmu_para] [pmu_init_chgvol] : 4200
  143. [ 0.243635] axp config [pmu_para] [pmu_init_chgend_rate] : 15
  144. [ 0.243645] axp config [pmu_para] [pmu_init_chg_enabled] : 1
  145. [ 0.243654] axp config [pmu_para] [pmu_init_adc_freq] : 100
  146. [ 0.243664] axp config [pmu_para] [pmu_init_adc_freqc] : 100
  147. [ 0.243674] axp config [pmu_para] [pmu_init_chg_pretime] : 50
  148. [ 0.243684] axp config [pmu_para] [pmu_init_chg_csttime] : 720
  149. [ 0.243694] axp config [pmu_para] [pmu_bat_para1] : 0
  150. [ 0.243703] axp config [pmu_para] [pmu_bat_para2] : 0
  151. [ 0.243712] axp config [pmu_para] [pmu_bat_para3] : 0
  152. [ 0.243722] axp config [pmu_para] [pmu_bat_para4] : 0
  153. [ 0.243731] axp config [pmu_para] [pmu_bat_para5] : 5
  154. [ 0.243740] axp config [pmu_para] [pmu_bat_para6] : 11
  155. [ 0.243750] axp config [pmu_para] [pmu_bat_para7] : 13
  156. [ 0.243759] axp config [pmu_para] [pmu_bat_para8] : 15
  157. [ 0.243769] axp config [pmu_para] [pmu_bat_para9] : 19
  158. [ 0.243778] axp config [pmu_para] [pmu_bat_para10] : 32
  159. [ 0.243788] axp config [pmu_para] [pmu_bat_para11] : 50
  160. [ 0.243798] axp config [pmu_para] [pmu_bat_para12] : 58
  161. [ 0.243808] axp config [pmu_para] [pmu_bat_para13] : 71
  162. [ 0.243817] axp config [pmu_para] [pmu_bat_para14] : 81
  163. [ 0.243827] axp config [pmu_para] [pmu_bat_para15] : 89
  164. [ 0.243837] axp config [pmu_para] [pmu_bat_para16] : 100
  165. [ 0.243846] axp config [pmu_para] [pmu_usbvol_limit] : 1
  166. [ 0.243856] axp config [pmu_para] [pmu_usbvol] : 4000
  167. [ 0.243865] axp config [pmu_para] [pmu_usbcur_limit] : 0
  168. [ 0.243875] axp config [pmu_para] [pmu_usbcur] : 0
  169. [ 0.243884] axp config [pmu_para] [pmu_pwroff_vol] : 3300
  170. [ 0.243894] axp config [pmu_para] [pmu_pwron_vol] : 2900
  171. [ 0.243904] axp config [target] [dcdc2_vol] : 1400
  172. [ 0.243913] axp config [target] [dcdc3_vol] : 1250
  173. [ 0.243921] axp config [target] [ldo2_vol] : 3000
  174. [ 0.243930] axp config [target] [ldo3_vol] : 2800
  175. [ 0.243939] axp config [target] [ldo4_vol] : 2800
  176. [ 0.243948] axp config [pmu_para] [pmu_pekoff_time] : 6000
  177. [ 0.243958] axp config [pmu_para] [pmu_pekoff_en] : 1
  178. [ 0.243967] axp config [pmu_para] [pmu_peklong_time] : 1500
  179. [ 0.243977] axp config [pmu_para] [pmu_pwrok_time] : 64
  180. [ 0.243987] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
  181. [ 0.243997] axp config [pmu_para] [pmu_intotp_en] : 1
  182. [ 0.244008] axp config [pmu_para] [pmu_pekon_time] : 1000
  183. [ 0.244403] [gpio-inf] aw gpio init start
  184. [ 0.244429] [gpio-inf] gpio_clk_init: apb pio clk enable success
  185. [ 0.244659] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
  186. [ 0.244859] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
  187. [ 0.245039] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
  188. [ 0.245220] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
  189. [ 0.245391] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
  190. [ 0.245612] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
  191. [ 0.245842] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
  192. [ 0.246029] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
  193. [ 0.246208] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
  194. [ 0.246609] [gpio-inf] aw gpio init done
  195. [ 0.290463] bio: create slab <bio-0> at 0
  196. [ 0.294141] SCSI subsystem initialized
  197. [ 0.294603] libata version 3.00 loaded.
  198. [ 0.295526] usbcore: registered new interface driver usbfs
  199. [ 0.295891] usbcore: registered new interface driver hub
  200. [ 0.296198] usbcore: registered new device driver usb
  201. [ 0.296875] [i2c3] fetch para from sysconfig failed
  202. [ 0.296886] [i2c4] fetch para from sysconfig failed
  203. [ 0.298116] -------------------------------------------
  204. [ 0.298128] axp_mfd_probe:axp20_mfd pmu probed !
  205. [ 0.298135] -------------------------------------------
  206. [ 0.300475] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  207. [ 0.301159] -------------------------------------------
  208. [ 0.301168] axp_mfd_probe:axp20_mfd pmu request_irq ok !
  209. [ 0.301175] -------------------------------------------
  210. [ 0.303031] [AXP]axp driver uning configuration failed(348)
  211. [ 0.303041] [AXP]power_start = 0
  212. [ 0.303066] I2C: i2c-0: sun7i I2C adapter
  213. [ 0.303073] **********start************
  214. [ 0.303080] 0x40
  215. [ 0.303085] 0xf8
  216. [ 0.303091] 0x58
  217. [ 0.303096] 0x0
  218. [ 0.303101] 0x0
  219. [ 0.303106] **********end************
  220. [ 0.303520] I2C: i2c-1: sun7i I2C adapter
  221. [ 0.303528] **********start************
  222. [ 0.303535] 0x40
  223. [ 0.303540] 0xf8
  224. [ 0.303546] 0x58
  225. [ 0.303551] 0x0
  226. [ 0.303556] 0x0
  227. [ 0.303561] **********end************
  228. [ 0.303899] I2C: i2c-2: sun7i I2C adapter
  229. [ 0.303907] **********start************
  230. [ 0.303914] 0x40
  231. [ 0.303919] 0xf8
  232. [ 0.303925] 0x28
  233. [ 0.303930] 0x0
  234. [ 0.303935] 0x0
  235. [ 0.303939] **********end************
  236. [ 0.304523] print_constraints: axp20_ldo1: 1300 mV
  237. [ 0.306232] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  238. [ 0.307897] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  239. [ 0.309783] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  240. [ 0.311469] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  241. [ 0.313166] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  242. [ 0.314172] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  243. [ 0.314969] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
  244. [ 0.316186] Advanced Linux Sound Architecture Driver Version 1.0.24.
  245. [ 0.317384] Bluetooth: Core ver 2.16
  246. [ 0.317591] NET: Registered protocol family 31
  247. [ 0.317602] Bluetooth: HCI device and connection manager initialized
  248. [ 0.317617] Bluetooth: HCI socket layer initialized
  249. [ 0.317626] Bluetooth: L2CAP socket layer initialized
  250. [ 0.317654] Bluetooth: SCO socket layer initialized
  251. [ 0.318353] cfg80211: Calling CRDA to update world regulatory domain
  252. [ 0.318891] Switching to clocksource arch_sys_counter
  253. [ 0.319276] FS-Cache: Loaded
  254. [ 0.319635] CacheFiles: Loaded
  255. [ 0.342954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  256. [ 0.343166] Line:1148:ohci_hcd_mod_init
  257. [ 0.343175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  258. [ 0.343362] line = 483,usb_manager_init
  259. [ 0.343369] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
  260. [ 0.343393] WRN:L173(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  261. [ 0.343406] WRN:L182(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  262. [ 0.343421] WRN:L201(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  263. [ 0.343434] WRN:L212(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  264. [ 0.343447] WRN:L224(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  265. [ 0.343462] WRN:L244(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  266. [ 0.343475] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  267. [ 0.343735] [sw_hcd0]: usb host driver initialize........
  268. [ 0.344074] [sw_udc]: udc_init: version 20080411
  269. [ 0.344147] [sw_udc]: usb_vbase = 0xf1c13000
  270. [ 0.344157] [sw_udc]: sram_vbase = 0xf1c00000
  271. [ 0.344195] [sw_udc]: open_usb_clock
  272. [ 0.364079] udc->driver is null, udc is need not stop
  273. [ 0.364976] NET: Registered protocol family 2
  274. [ 0.365414] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  275. [ 0.367694] TCP established hash table entries: 131072 (order: 8, 1048576 by)
  276. [ 0.372353] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  277. [ 0.373343] TCP: Hash tables configured (established 131072 bind 65536)
  278. [ 0.373357] TCP reno registered
  279. [ 0.373405] UDP hash table entries: 512 (order: 2, 16384 bytes)
  280. [ 0.373472] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  281. [ 0.373934] NET: Registered protocol family 1
  282. [ 0.374486] RPC: Registered named UNIX socket transport module.
  283. [ 0.374500] RPC: Registered udp transport module.
  284. [ 0.374508] RPC: Registered tcp transport module.
  285. [ 0.374516] RPC: Registered tcp NFSv4.1 backchannel transport module.
  286. [ 0.374795] sunxi_reg_init enter
  287. [ 0.375867] [pm]aw_pm_init!
  288. [ 0.375880] dram config [dram_para] [dram_baseaddr] : 1073741824
  289. [ 0.375891] dram config [dram_para] [dram_clk] : 480
  290. [ 0.375900] dram config [dram_para] [dram_type] : 3
  291. [ 0.375909] dram config [dram_para] [dram_rank_num] : -1
  292. [ 0.375918] dram config [dram_para] [dram_chip_density] : -1
  293. [ 0.375926] dram config [dram_para] [dram_io_width] : -1
  294. [ 0.375937] dram config [dram_para] [dram_bus_width] : -1
  295. [ 0.375946] dram config [dram_para] [dram_cas] : 9
  296. [ 0.375954] dram config [dram_para] [dram_zq] : 127
  297. [ 0.375963] dram config [dram_para] [dram_odt_en] : 0
  298. [ 0.375971] dram config [dram_para] [dram_size] : -1
  299. [ 0.375980] dram config [dram_para] [dram_tpr0] : 1121491383
  300. [ 0.375989] dram config [dram_para] [dram_tpr1] : 41104
  301. [ 0.375998] dram config [dram_para] [dram_tpr2] : 141824
  302. [ 0.376007] dram config [dram_para] [dram_tpr3] : 0
  303. [ 0.376015] dram config [dram_para] [dram_tpr4] : 1
  304. [ 0.376024] dram config [dram_para] [dram_tpr5] : 0
  305. [ 0.376032] dram config [dram_para] [dram_emr1] : 4
  306. [ 0.376041] dram config [dram_para] [dram_emr2] : 16
  307. [ 0.376049] dram config [dram_para] [dram_emr3] : 0
  308. [ 0.376059] standby_mode = 0.
  309. [ 0.376065] aw_pm_init: not support super standby.
  310. [ 0.376076] cpu0_en = 0.
  311. [ 0.376083] dram_selfresh_en = 1.
  312. [ 0.376090] wakeup src cnt is : 0.
  313. [ 0.376169] DRAM_STANDBY_PGD_ADDR:d201c000
  314. [ 0.376194] [wifi]: select wifi: rtl8188eu !!
  315. [ 0.376534] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
  316. [ 0.376548] [rtl8188eu]: module power name
  317. [ 0.376556] [rtl8188eu]: rtl8188eu module power set by axp.
  318. [ 0.376570] [rtl8188eu]: get power regulator failed.
  319. [ 0.376597] [wifi_pm]: wifi gpio init is OK !!
  320. [ 0.376789] [powernow inf] module init
  321. [ 0.376989] [powernow inf] create class sw_powernow done
  322. [ 0.378709] highmem bounce pool size: 64 pages
  323. [ 0.382196] NTFS driver 2.1.30 [Flags: R/W].
  324. [ 0.382454] fuse init (API version 7.18)
  325. [ 0.383600] msgmni has been set to 1122
  326. [ 0.385106] io scheduler noop registered
  327. [ 0.385118] io scheduler deadline registered (default)
  328. [ 0.393990] [uart]: driver initializied
  329. [ 0.394491] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SW
  330. [ 0.394513] [uart]: console setup baud 115200 parity n bits 8, flow n
  331. [ 0.394539] [uart]: uart0 LCR & BAUD changed, reset controller...
  332. [ 1.976398] console [ttyS0] enabled
  333. [ 1.982006] G2D: drv_g2d_init
  334. [ 1.985509] G2D: Module initialized.major:252
  335. [ 1.991988] sunmm_probe, line 269
  336. [ 2.002283] loop: module loaded
  337. [ 2.007325] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  338. [ 2.015293] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  339. [ 2.021395] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 ime
  340. [ 2.030893] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part
  341. [ 2.040139] dma_alloc_coherent mem = 0xffde0000, size = 0x16500, mem_dma=0x40
  342. [ 2.050004] scsi0 : sw_ahci_platform
  343. [ 2.054843] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x8
  344. [ 2.066013] tun: Universal TUN/TAP device driver, 1.6
  345. [ 2.071706] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  346. [ 2.079143] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
  347. [ 2.086882] PPP generic driver version 2.4.2
  348. [ 2.092247] PPP BSD Compression module registered
  349. [ 2.097519] PPP Deflate Compression module registered
  350. [ 2.104180] PPP MPPE Compression module registered
  351. [ 2.109583] NET: Registered protocol family 24
  352. [ 2.114600] PPTP driver version 0.8.5
  353. [ 2.120044] usbcore: registered new interface driver rtl8150
  354. [ 2.126597] usbcore: registered new interface driver asix
  355. [ 2.133078] usbcore: registered new interface driver qf9700
  356. [ 2.139683] usbcore: registered new interface driver cdc_ether
  357. [ 2.146419] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  358. [ 2.154819] [sw_hci_sun4i_init 1254]
  359. [ 2.158835] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrictd
  360. [ 2.168518] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrictd
  361. [ 2.178182] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrictd
  362. [ 2.187785] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrictd
  363. [ 2.197744] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0x0
  364. [ 2.206500] [sw-ehci1]: open clock
  365. [ 2.230188] [sw-ehci1]: open clock, 0x60(0x202c143), 0xcc(0x103)
  366. [ 2.236925] [sw-ehci1]: Set USB Power ON
  367. [ 2.241338] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  368. [ 2.249780] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  369. [ 2.257789] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
  370. [ 2.263785] [ehci_run 736]
  371. [ 2.278954] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  372. [ 2.285915] hub 1-0:1.0: USB hub found
  373. [ 2.290160] hub 1-0:1.0: 1 port detected
  374. [ 2.295231] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0x4
  375. [ 2.303961] [sw-ohci1]: open clock
  376. [ 2.327647] [sw-ohci1]: open clock, 0x60(0x202c147), 0xcc(0x163)
  377. [ 2.334453] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c147
  378. [ 2.340916] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  379. [ 2.348949] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  380. [ 2.356902] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
  381. [ 2.408973] ata1: SATA link down (SStatus 0 SControl 300)
  382. [ 2.423813] hub 2-0:1.0: USB hub found
  383. [ 2.428031] hub 2-0:1.0: 1 port detected
  384. [ 2.433184] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0x8
  385. [ 2.441925] [sw-ehci2]: open clock
  386. [ 2.465598] [sw-ehci2]: open clock, 0x60(0x202c14f), 0xcc(0x167)
  387. [ 2.472349] [sw-ehci2]: Set USB Power ON
  388. [ 2.476749] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  389. [ 2.485183] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  390. [ 2.493327] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
  391. [ 2.499309] [ehci_run 736]
  392. [ 2.549004] The port change to OHCI now!
  393. [ 2.568957] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  394. [ 2.575951] hub 3-0:1.0: USB hub found
  395. [ 2.580199] hub 3-0:1.0: 1 port detected
  396. [ 2.585264] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc
  397. [ 2.594006] [sw-ohci2]: open clock
  398. [ 2.617678] [sw-ohci2]: open clock, 0x60(0x202c15f), 0xcc(0x1e7)
  399. [ 2.624431] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c15f
  400. [ 2.630927] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  401. [ 2.639030] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  402. [ 2.647000] sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
  403. [ 2.713801] hub 4-0:1.0: USB hub found
  404. [ 2.718020] hub 4-0:1.0: 1 port detected
  405. [ 2.723238] usbcore: registered new interface driver cdc_acm
  406. [ 2.729644] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
  407. [ 2.738618] Initializing USB Mass Storage driver...
  408. [ 2.744398] usbcore: registered new interface driver usb-storage
  409. [ 2.751183] USB Mass Storage support registered.
  410. [ 2.756803] usbcore: registered new interface driver usbserial
  411. [ 2.763394] usbserial: USB Serial Driver core
  412. [ 2.768452] USB Serial support registered for GSM modem (1-port)
  413. [ 2.775615] usbcore: registered new interface driver option
  414. [ 2.775634] usb 2-1: new low-speed USB device number 2 using sw-ohci
  415. [ 2.789101] option: v0.7.2:USB Driver for GSM modems
  416. [ 2.795203] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  417. [ 2.802700] [sw_udc]: alloc request: ep(0xc075c0f0, ep0, 64), req(0xeeac69c0)
  418. [ 2.810724] [sw_udc]: sw_udc_pullup, is_on = 0
  419. [ 2.815709] [sw_udc]: usbd_stop_work
  420. [ 2.823101] android_usb gadget: Mass Storage Function, version: 2009/09/11
  421. [ 2.830919] android_usb gadget: Number of LUNs=3
  422. [ 2.836097] lun0: LUN: removable file: (no medium)
  423. [ 2.841603] lun1: LUN: removable file: (no medium)
  424. [ 2.847073] lun2: LUN: removable file: (no medium)
  425. [ 2.853290] android_usb gadget: android_usb ready
  426. [ 2.859323] mousedev: PS/2 mouse device common for all mice
  427. [ 2.865916] input: sw-keyboard as /devices/virtual/input/input0
  428. [ 2.873665] input: sun7i-ir as /devices/virtual/input/input1
  429. [ 2.880684] uinput result 0 , vmouse_init
  430. [ 2.885696] input: vmouse as /devices/virtual/input/input2
  431. [ 2.893138] =====ctp_fetch_sysconfig_para=====.
  432. [ 2.898324] ctp_fetch_sysconfig_para: ctp_unused.
  433. [ 2.903739] ctp_init: ctp_fetch_sysconfig_para err.
  434. [ 2.909775] sunxi_rtc_init: enter
  435. [ 2.913821] rtc_hw_init(400): start
  436. [ 2.917833] rtc_hw_init(416) err: set clksrc to external losc failed! rtc tig
  437. [ 2.927375] rtc_hw_init(431): end
  438. [ 2.931204] sunxi_rtc_gettime(34): err, losc_err_flag is 1
  439. [ 2.937966] using rtc device, rtc, for alarms
  440. [ 2.942726] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  441. [ 2.950084] i2c /dev entries driver
  442. [ 2.955371] lirc_dev: IR Remote Control driver registered, major 249
  443. [ 2.962685] IR NEC protocol handler initialized
  444. [ 2.967758] IR RC5(x) protocol handler initialized
  445. [ 2.973152] IR RC6 protocol handler initialized
  446. [ 2.978222] IR JVC protocol handler initialized
  447. [ 2.983416] IR Sony protocol handler initialized
  448. [ 2.988593] IR RC5 (streamzap) protocol handler initialized
  449. [ 2.994864] IR SANYO protocol handler initialized
  450. [ 3.000148] IR MCE Keyboard/mouse protocol handler initialized
  451. [ 3.006685] IR LIRC bridge handler initialized
  452. [ 3.011681] Linux video capture interface: v2.00
  453. [ 3.017271] [hx-cedar dev]: install start!!!
  454. [ 3.023179] [cedar dev]: install end!!!
  455. [ 3.027876] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-03
  456. [ 3.050213] pmu_pekoff_time = 6000
  457. [ 3.054027] pmu_pekoff_en = 1
  458. [ 3.057348] pmu_peklong_time = 1500
  459. [ 3.061277] pmu_pekon_time = 1000
  460. [ 3.064988] pmu_pwrok_time = 64
  461. [ 3.068505] pmu_pwrnoe_time = 2000
  462. [ 3.072329] pmu_intotp_en = 1
  463. [ 3.076257] [AXP]POWER20_OFF_CTL:2070-->0x42
  464. [ 3.081720] POWER20_PEK_SET:2087-->0x9d
  465. [ 3.086614] POWER20_PEK_SET:2098-->0x9d
  466. [ 3.091525] POWER20_PEK_SET:2107-->0x9d
  467. [ 3.096417] POWER20_PEK_SET:2118-->0x9d
  468. [ 3.101323] POWER20_PEK_SET:2130-->0x9d
  469. [ 3.106213] POWER20_HOTOVER_CTL:2139-->0x25
  470. [ 3.115995] [AXP]last_rest_vol = 0, now_rest_vol = 100
  471. [ 3.122797] [AXP]charger->rest_vol = 100
  472. [ 3.130618] create_regulator: axp20_ldo2: Failed to create debugfs directory
  473. [ 3.138528] regulator_virtual_consumer_probe:get regulator:axp20_analog/fm ok
  474. [ 3.146888] regulator_virtual_consumer_probe:get regulator:axp20_pll ok
  475. [ 3.154692] regulator_virtual_consumer_probe:get regulator:axp20_hdmi ok
  476. [ 3.162551] create_regulator: axp20_buck2: Failed to create debugfs directory
  477. [ 3.170606] regulator_virtual_consumer_probe:get regulator:axp20_core ok
  478. [ 3.178431] regulator_virtual_consumer_probe:get regulator:axp20_ddr ok
  479. [ 3.186218] regulator_virtual_consumer_probe:get regulator:axp20_mic ok
  480. [ 3.194509] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-m
  481. [ 3.204390] device-mapper: multipath: version 1.3.0 loaded
  482. [ 3.210770] device-mapper: multipath round-robin: version 1.0.0 loaded
  483. [ 3.218092] device-mapper: multipath queue-length: version 0.1.0 loaded
  484. [ 3.225546] device-mapper: multipath service-time: version 0.2.0 loaded
  485. [ 3.233260] Bluetooth: HCI UART driver ver 2.2
  486. [ 3.238244] Bluetooth: HCI H4 protocol initialized
  487. [ 3.243636] Bluetooth: HCI BCSP protocol initialized
  488. [ 3.249223] Bluetooth: HCILL protocol initialized
  489. [ 3.254495] Bluetooth: HCIATH3K protocol initialized
  490. [ 3.260128] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  491. [ 3.266354] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
  492. [ 3.266361]
  493. [ 3.275413] [gpio-err] __pio_to_irq: invalid pio to irq
  494. [ 3.282139] [fantasy] err get cpu normal frequency from sysconfig failed
  495. [ 3.289908] [mmc-msg] sw_mci_init
  496. [ 3.293653] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  497. [ 3.302502] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  498. [ 3.313758] [mmc-msg] sdc0 Probe: base:0xf003e000 irq:64 sg_cpu:ffdde000(4fc.
  499. [ 3.323541] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  500. [ 3.334777] [mmc-msg] sdc3 Probe: base:0xf0094000 irq:67 sg_cpu:ffddd000(4fc.
  501. [ 3.344202] sunxi_leds driver init
  502. [ 3.348025] request gpio187, ret=0
  503. [ 3.351884] trigger_name:
  504. [ 3.354813] request gpio188, ret=0
  505. [ 3.358617] trigger_name:heartbeat
  506. [ 3.363037] Registered led device: green:ph20:led1
  507. [ 3.368609] Registered led device: blue:ph21:led2
  508. [ 3.384400] input: Genius Optical Mouse as /devices/platform/sw-ohci.14
  509. [ 3.396089] generic-usb 0003:0458:003A.0001: input: USB HID v1.10 Mouse [Gen0
  510. [ 3.408971] usbcore: registered new interface driver usbhid
  511. [ 3.415200] usbhid: USB HID core driver
  512. [ 3.421130] ashmem: initialized
  513. [ 3.424934] logger: created 256K log 'log_main'
  514. [ 3.430290] logger: created 256K log 'log_events'
  515. [ 3.435793] logger: created 256K log 'log_radio'
  516. [ 3.441248] logger: created 256K log 'log_system'
  517. [ 3.447921] usbcore: registered new interface driver snd-usb-audio
  518. [ 3.455736] value is 1
  519. [ 3.458702] enter sun7i Audio codec!!!
  520. [ 3.464654] sun7i audio support initialized
  521. [ 3.469583] sun7i Audio codec successfully loaded..
  522. [ 3.477786] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
  523. [ 3.485364] [SPDIF]sun7i-spdif cannot find any using configuration for contr!
  524. [ 3.496760] [SPDIF]sun7i_sndspdif cannot find any using configuration for co!
  525. [ 3.507469] [I2S] i2s_select type err!
  526. [ 3.511677] [I2S]sun7i-i2s cannot find any using configuration for controlle!
  527. [ 3.522262] [I2S]sndi2s cannot find any using configuration for controllers,!
  528. [ 3.531887] [I2S] i2s_master type err!
  529. [ 3.536074] [I2S] audio_format type err!
  530. [ 3.540467] [I2S] signal_inversion type err!
  531. [ 3.545236] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  532. [ 3.555378] func:sun7i_pcm_init(line:953)sun7i-pcm.c
  533. [ 3.560937] [PCM] type err!
  534. [ 3.564055] [PCM] i2s_select type err!
  535. [ 3.568240] func:sun7i_pcm_init(line:964)sun7i-pcm.c,pcm_used:-284983396
  536. [ 3.575736] get pcm_para gpio list failed
  537. [ 3.580243] func:sun7i_soc_platform_i2s_init(line:803)sun7i-pcmdma.c
  538. [ 3.587910] func:sndpcm_codec_init(line:181)sndpcm.c
  539. [ 3.593496] [PCM] type err!
  540. [ 3.596615] func:sndpcm_codec_init(line:187)sndpcm.c,pcm_used:0
  541. [ 3.603265] [PCM]sndi2s cannot find any using configuration for controllers,!
  542. [ 3.612797] pcm_used type err
  543. [ 3.616209] [PCM] pcm_master type err!
  544. [ 3.620418] [PCM] audio_format type err!
  545. [ 3.624796] [PCM] signal_inversion type err!
  546. [ 3.629580] func:sun7i_sndpcm_init(line:209)sun7i-sndpcm.c,pcm_used:0
  547. [ 3.636774] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  548. [ 3.646884] ALSA device list:
  549. [ 3.650206] #0: sun7i-CODEC Audio Codec
  550. [ 3.654772] #1: sndhdmi
  551. [ 3.657930] Netfilter messages via NETLINK v0.30.
  552. [ 3.663358] nf_conntrack version 0.5.0 (13202 buckets, 52808 max)
  553. [ 3.670750] ctnetlink v0.93: registering with nfnetlink.
  554. [ 3.676814] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  555. [ 3.684648] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  556. [ 3.692372] xt_time: kernel timezone is -0000
  557. [ 3.697297] IPv4 over IPv4 tunneling driver
  558. [ 3.703098] GRE over IPv4 demultiplexor driver
  559. [ 3.707877] GRE over IPv4 tunneling driver
  560. [ 3.713985] ip_tables: (C) 2000-2006 Netfilter Core Team
  561. [ 3.720239] TCP cubic registered
  562. [ 3.723844] Initializing XFRM netlink socket
  563. [ 3.729080] NET: Registered protocol family 10
  564. [ 3.735398] ip6_tables: (C) 2000-2006 Netfilter Core Team
  565. [ 3.741767] IPv6 over IPv4 tunneling driver
  566. [ 3.748929] NET: Registered protocol family 17
  567. [ 3.754011] NET: Registered protocol family 15
  568. [ 3.759191] Bluetooth: RFCOMM TTY layer initialized
  569. [ 3.764661] Bluetooth: RFCOMM socket layer initialized
  570. [ 3.770495] Bluetooth: RFCOMM ver 1.11
  571. [ 3.774682] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  572. [ 3.780749] Bluetooth: BNEP filters: protocol multicast
  573. [ 3.786585] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  574. [ 3.793555] L2TP core driver, V2.0
  575. [ 3.797374] PPPoL2TP kernel driver, V2.0
  576. [ 3.801828] L2TP IP encapsulation support (L2TPv3)
  577. [ 3.807326] L2TP netlink interface
  578. [ 3.811177] L2TP ethernet pseudowire support (L2TPv3)
  579. [ 3.816826] Registering the dns_resolver key type
  580. [ 3.822279] VFP support v0.3: implementor 41 architecture 2 part 30 variant 4
  581. [ 3.830876] ThumbEE CPU extension supported.
  582. [ 3.835645] [rfkill]: init no bt used in configuration
  583. [ 3.843224] regulator_init_complete: axp20_buck3: incomplete constraints, len
  584. [ 3.852248] regulator_init_complete: axp20_buck2: incomplete constraints, len
  585. [ 3.861296] regulator_init_complete: axp20_ldo4: incomplete constraints, lean
  586. [ 3.870206] regulator_init_complete: axp20_ldo3: incomplete constraints, lean
  587. [ 3.879097] regulator_init_complete: axp20_ldo2: incomplete constraints, lean
  588. [ 3.887982] regulator_init_complete: axp20_ldo1: incomplete constraints, lean
  589. [ 3.896628] sunxi_rtc_gettime(34): err, losc_err_flag is 1
  590. [ 3.902836] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  591. [ 3.911129] Waiting for root device /dev/mmcblk0p3...
  592. [ 4.303908] [mmc-msg] mmc 0 detect change, present 1
  593. [ 4.808974] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timB
  594. [ 4.818993] [mmc-msg] sdc0 power on
  595. [ 4.838957] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  596. [ 4.921284] [mmc-err] smc 0 err, cmd 52, RTO
  597. [ 4.926982] [mmc-err] smc 0 err, cmd 52, RTO
  598. [ 4.931859] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  599. [ 4.944771] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  600. [ 4.957432] [mmc-err] smc 0 err, cmd 5, RTO
  601. [ 4.963021] [mmc-err] smc 0 err, cmd 5, RTO
  602. [ 4.968606] [mmc-err] smc 0 err, cmd 5, RTO
  603. [ 4.974199] [mmc-err] smc 0 err, cmd 5, RTO
  604. [ 4.979620] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  605. [ 4.990168] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  606. [ 5.003070] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  607. [ 5.042128] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  608. [ 5.052610] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  609. [ 5.118339] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  610. [ 5.128989] mmc0: new high speed SDHC card at address 0007
  611. [ 5.135879] mmcblk0: mmc0:0007 SD04G 3.70 GiB
  612. [ 5.153173] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
  613. [ 5.231642] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incoms
  614. [ 5.320706] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incoms
  615. [ 5.418076] EXT4-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fd
  616. [ 5.536910] EXT4-fs (mmcblk0p3): recovery complete
  617. [ 5.542299] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. )
  618. [ 5.551401] VFS: Mounted root (ext4 filesystem) on device 179:3.
  619. [ 5.559970] devtmpfs: mounted
  620. [ 5.563652] Freeing init memory: 196K
  621. [ 5.567814] Failed to execute /init. Attempting defaults...
  622. [ 5.576162] Kernel panic - not syncing: No init found. Try passing init= op.
  623. [ 5.590093] CPU0: stopping
  624. [ 5.593137] [<c00144c4>] (unwind_backtrace+0x0/0xe0) from [<c0012940>] (hand)
  625. [ 5.602747] [<c0012940>] (handle_IPI+0xf8/0x1d8) from [<c0008504>] (gic_hand)
  626. [ 5.612265] [<c0008504>] (gic_handle_irq+0x8c/0x9c) from [<c000d540>] (__irq)
  627. [ 5.621574] Exception stack(0xc0731f70 to 0xc0731fb8)
  628. [ 5.627201] 1f60: 00000003 00000001 c0730
  629. [ 5.636324] 1f80: c0730000 c077ec48 c04fb8b8 c0740b10 4000406a 410fc074 00000
  630. [ 5.645448] 1fa0: 00000000 c0731fb8 c000ead0 c000ead4 60000013 ffffffff
  631. [ 5.652832] [<c000d540>] (__irq_svc+0x40/0x70) from [<c000ead4>] (default_id)
  632. [ 5.661952] [<c000ead4>] (default_idle+0x24/0x28) from [<c000ee3c>] (cpu_idl)
  633. [ 5.670982] [<c000ee3c>] (cpu_idle+0x88/0xe8) from [<c06fe7a4>] (start_kerne)
  634. [ 5.680196] [hotplug]: try to kill cpu:0 failed!
  635. [ 5.685366] Rebooting in 10 seconds..
  636. [ 15.612179] Restarting Linux version 3.3.0 (rolivo@build) (gcc version 4.6.33
  637. [ 15.612193]
  638. [ 15.634767] sun7i_restart: to check
  639.  
  640. U-Boot SPL 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49)
  641. Board: Cubieboard2
  642. DRAM: 1024MB
  643. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  644. SUNXI SD/MMC: 0
  645.  
  646.  
  647. U-Boot 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49) Allwinner Technoloy
  648.  
  649. CPU: Allwinner A20 (SUN7I)
  650. Board: Cubieboard2
  651. I2C: ready
  652. DRAM: 1 GiB
  653. MMC: SUNXI SD/MMC: 0
  654. *** Warning - bad CRC, using default environment
  655.  
  656. In: serial
  657. Out: serial
  658. Err: serial
  659. Net: emac
  660. Hit any key to stop autoboot: 0
  661. reading uEnv.txt
  662. 260 bytes read in 5 ms (50.8 KiB/s)
  663. Loaded environment from uEnv.txt
  664. reading boot.scr
  665. ** Unable to read file boot.scr **
  666. Failed to mount ext2 filesystem...
  667. ** Unrecognized filesystem type **
  668. Failed to mount ext2 filesystem...
  669. ** Unrecognized filesystem type **
  670. Failed to mount ext2 filesystem...
  671. ** Unrecognized filesystem type **
  672. reading script.bin
  673. 45088 bytes read in 9 ms (4.8 MiB/s)
  674. reading uImage
  675. 3887904 bytes read in 182 ms (20.4 MiB/s)
  676. ## Booting kernel from Legacy Image at 48000000 ...
  677. Image Name:
  678. Created: 2013-09-18 9:15:49 UTC
  679. Image Type: ARM Linux Kernel Image (uncompressed)
  680. Data Size: 3887840 Bytes = 3.7 MiB
  681. Load Address: 40008000
  682. Entry Point: 40008000
  683. Verifying Checksum ... OK
  684. Loading Kernel Image ... OK
  685. OK
  686.  
  687. Starting kernel ...
  688.  
  689. [ 0.000000] Booting Linux on physical CPU 0
  690. [ 0.000000] Initializing cgroup subsys cpuset
  691. [ 0.000000] Initializing cgroup subsys cpu
  692. [ 0.000000] Linux version 3.3.0 (rolivo@build) (gcc version 4.6.3 20120201 (3
  693. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
  694. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
  695. [ 0.000000] Machine: sun7i
  696. [ 0.000000] [sun7i_fixup]: From boot, get meminfo:
  697. [ 0.000000] Start: 0x40000000
  698. [ 0.000000] Size: 1024MB
  699. [ 0.000000] memory reserved(in bytes):
  700. [ 0.000000] : 0x43000000, 0x00010000
  701. [ 0.000000] : 0x52000000, 0x00020000
  702. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  703. [ 0.000000] On node 0 totalpages: 216064
  704. [ 0.000000] free_area_init_node: node 0, pgdat c077dc00, node_mem_map d000000
  705. [ 0.000000] DMA zone: 576 pages used for memmap
  706. [ 0.000000] DMA zone: 0 pages reserved
  707. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  708. [ 0.000000] Normal zone: 1134 pages used for memmap
  709. [ 0.000000] Normal zone: 81810 pages, LIFO batch:15
  710. [ 0.000000] HighMem zone: 594 pages used for memmap
  711. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  712. [ 0.000000] [scu_get_core_count] cores=1800001
  713. [ 0.000000] sun7i_init_early: enter
  714. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0908000 s5504 r8192 d14976 u32768
  715. [ 0.000000] pcpu-alloc: s5504 r8192 d14976 u32768 alloc=8*4096
  716. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  717. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
  718. [ 0.000000] Kernel command line: console=ttyS0,115200 root= loglevel=8 panic9
  719. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  720. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  721. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  722. [ 0.000000] Memory: 64MB 780MB = 844MB total
  723. [ 0.000000] Memory: 844956k/844956k available, 203620k reserved, 270336K higm
  724. [ 0.000000] Virtual kernel memory layout:
  725. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  726. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  727. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  728. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  729. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  730. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  731. [ 0.000000] .text : 0xc0008000 - 0xc06fd7ac (7126 kB)
  732. [ 0.000000] .init : 0xc06fe000 - 0xc072f580 ( 198 kB)
  733. [ 0.000000] .data : 0xc0730000 - 0xc077eb20 ( 315 kB)
  734. [ 0.000000] .bss : 0xc077eb44 - 0xc08c9cf8 (1325 kB)
  735. [ 0.000000] Preemptible hierarchical RCU implementation.
  736. [ 0.000000] NR_IRQS:160
  737. [ 0.000000] aw_clkevt_init: timer base 0xf000cc00
  738. [ 0.000000] [aw_delay]: It is use use_time_delay function!
  739. [ 0.000000] aw_clksrc_init(96)
  740. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 1789s
  741. [ 0.000000] aw_clksrc_init(120)
  742. [ 0.000000] Architected local timer running at 24.00MHz.
  743. [ 0.000000] Console: colour dummy device 80x30
  744. [ 0.000474] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
  745. [ 0.059998] pid_max: default: 32768 minimum: 301
  746. [ 0.060382] Mount-cache hash table entries: 512
  747. [ 0.061069] CPU: Testing write buffer coherency: ok
  748. [ 0.061368] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  749. [ 0.061457] Setting up static identity map for 0x404f8b80 - 0x404f8bd8
  750. [ 0.174293] CPU1: Booted secondary processor
  751. [ 0.231656] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  752. [ 0.231752] Brought up 2 CPUs
  753. [ 0.231763] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
  754. [ 0.232729] devtmpfs: initialized
  755. [ 0.236790] script_init enter!
  756. [ 0.237634] script_init exit!
  757. [ 0.238283] kworker/u:0 used greatest stack depth: 6576 bytes left
  758. [ 0.239313] print_constraints: dummy:
  759. [ 0.239981] NET: Registered protocol family 16
  760. [ 0.240271] sunxi_dump_init success
  761. [ 0.241799] kworker/u:0 used greatest stack depth: 6408 bytes left
  762. [ 0.242085] sun7i_init: enter
  763. [ 0.242708] [ccu-inf] aw clock manager init
  764. [ 0.242719] [ccu-inf] aw_ccu_init
  765. [ 0.242919] [ccu-inf] script config pll3 to 297MHz
  766. [ 0.242932] [ccu-inf] script config pll4 to 300MHz
  767. [ 0.242944] [ccu-inf] script config pll6 to 600MHz
  768. [ 0.242955] [ccu-inf] script config pll7 to 297MHz
  769. [ 0.242968] [ccu-inf] script config pll8 to 336MHz
  770. [ 0.243553] axp config [pmu_para] [pmu_used] : 1
  771. [ 0.243565] axp config [pmu_para] [pmu_twi_id] : 0
  772. [ 0.243575] axp config [pmu_para] [pmu_irq_id] : 32
  773. [ 0.243584] axp config [pmu_para] [pmu_twi_addr] : 52
  774. [ 0.243593] axp config [pmu_para] [pmu_battery_rdc] : 120
  775. [ 0.243602] axp config [pmu_para] [pmu_battery_cap] : 2100
  776. [ 0.243612] axp config [pmu_para] [pmu_init_chgcur] : 300
  777. [ 0.243622] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
  778. [ 0.243632] axp config [pmu_para] [pmu_resume_chgcur] : 300
  779. [ 0.243642] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
  780. [ 0.243652] axp config [pmu_para] [pmu_init_chgvol] : 4200
  781. [ 0.243664] axp config [pmu_para] [pmu_init_chgend_rate] : 15
  782. [ 0.243674] axp config [pmu_para] [pmu_init_chg_enabled] : 1
  783. [ 0.243684] axp config [pmu_para] [pmu_init_adc_freq] : 100
  784. [ 0.243693] axp config [pmu_para] [pmu_init_adc_freqc] : 100
  785. [ 0.243703] axp config [pmu_para] [pmu_init_chg_pretime] : 50
  786. [ 0.243713] axp config [pmu_para] [pmu_init_chg_csttime] : 720
  787. [ 0.243723] axp config [pmu_para] [pmu_bat_para1] : 0
  788. [ 0.243734] axp config [pmu_para] [pmu_bat_para2] : 0
  789. [ 0.243743] axp config [pmu_para] [pmu_bat_para3] : 0
  790. [ 0.243753] axp config [pmu_para] [pmu_bat_para4] : 0
  791. [ 0.243762] axp config [pmu_para] [pmu_bat_para5] : 5
  792. [ 0.243771] axp config [pmu_para] [pmu_bat_para6] : 11
  793. [ 0.243781] axp config [pmu_para] [pmu_bat_para7] : 13
  794. [ 0.243790] axp config [pmu_para] [pmu_bat_para8] : 15
  795. [ 0.243800] axp config [pmu_para] [pmu_bat_para9] : 19
  796. [ 0.243809] axp config [pmu_para] [pmu_bat_para10] : 32
  797. [ 0.243819] axp config [pmu_para] [pmu_bat_para11] : 50
  798. [ 0.243828] axp config [pmu_para] [pmu_bat_para12] : 58
  799. [ 0.243838] axp config [pmu_para] [pmu_bat_para13] : 71
  800. [ 0.243847] axp config [pmu_para] [pmu_bat_para14] : 81
  801. [ 0.243857] axp config [pmu_para] [pmu_bat_para15] : 89
  802. [ 0.243867] axp config [pmu_para] [pmu_bat_para16] : 100
  803. [ 0.243876] axp config [pmu_para] [pmu_usbvol_limit] : 1
  804. [ 0.243886] axp config [pmu_para] [pmu_usbvol] : 4000
  805. [ 0.243895] axp config [pmu_para] [pmu_usbcur_limit] : 0
  806. [ 0.243905] axp config [pmu_para] [pmu_usbcur] : 0
  807. [ 0.243914] axp config [pmu_para] [pmu_pwroff_vol] : 3300
  808. [ 0.243924] axp config [pmu_para] [pmu_pwron_vol] : 2900
  809. [ 0.243934] axp config [target] [dcdc2_vol] : 1400
  810. [ 0.243944] axp config [target] [dcdc3_vol] : 1250
  811. [ 0.243953] axp config [target] [ldo2_vol] : 3000
  812. [ 0.243962] axp config [target] [ldo3_vol] : 2800
  813. [ 0.243970] axp config [target] [ldo4_vol] : 2800
  814. [ 0.243980] axp config [pmu_para] [pmu_pekoff_time] : 6000
  815. [ 0.243989] axp config [pmu_para] [pmu_pekoff_en] : 1
  816. [ 0.243999] axp config [pmu_para] [pmu_peklong_time] : 1500
  817. [ 0.244009] axp config [pmu_para] [pmu_pwrok_time] : 64
  818. [ 0.244019] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
  819. [ 0.244028] axp config [pmu_para] [pmu_intotp_en] : 1
  820. [ 0.244038] axp config [pmu_para] [pmu_pekon_time] : 1000
  821. [ 0.244423] [gpio-inf] aw gpio init start
  822. [ 0.244448] [gpio-inf] gpio_clk_init: apb pio clk enable success
  823. [ 0.244667] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
  824. [ 0.244865] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
  825. [ 0.245063] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
  826. [ 0.245262] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
  827. [ 0.245435] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
  828. [ 0.245605] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
  829. [ 0.245838] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
  830. [ 0.246063] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
  831. [ 0.246247] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
  832. [ 0.246657] [gpio-inf] aw gpio init done
  833. [ 0.291132] bio: create slab <bio-0> at 0
  834. [ 0.293237] SCSI subsystem initialized
  835. [ 0.293694] libata version 3.00 loaded.
  836. [ 0.294611] usbcore: registered new interface driver usbfs
  837. [ 0.295002] usbcore: registered new interface driver hub
  838. [ 0.295318] usbcore: registered new device driver usb
  839. [ 0.296012] [i2c3] fetch para from sysconfig failed
  840. [ 0.296024] [i2c4] fetch para from sysconfig failed
  841. [ 0.297265] -------------------------------------------
  842. [ 0.297276] axp_mfd_probe:axp20_mfd pmu probed !
  843. [ 0.297283] -------------------------------------------
  844. [ 0.299612] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  845. [ 0.300289] -------------------------------------------
  846. [ 0.300297] axp_mfd_probe:axp20_mfd pmu request_irq ok !
  847. [ 0.300304] -------------------------------------------
  848. [ 0.303776] [AXP]axp driver uning configuration failed(348)
  849. [ 0.303788] [AXP]power_start = 0
  850. [ 0.303824] I2C: i2c-0: sun7i I2C adapter
  851. [ 0.303831] **********start************
  852. [ 0.303838] 0x40
  853. [ 0.303843] 0xf8
  854. [ 0.303849] 0x58
  855. [ 0.303854] 0x0
  856. [ 0.303859] 0x0
  857. [ 0.303864] **********end************
  858. [ 0.304445] I2C: i2c-1: sun7i I2C adapter
  859. [ 0.304454] **********start************
  860. [ 0.304461] 0x40
  861. [ 0.304467] 0xf8
  862. [ 0.304472] 0x58
  863. [ 0.304477] 0x0
  864. [ 0.304482] 0x0
  865. [ 0.304487] **********end************
  866. [ 0.304871] I2C: i2c-2: sun7i I2C adapter
  867. [ 0.304879] **********start************
  868. [ 0.304886] 0x40
  869. [ 0.304891] 0xf8
  870. [ 0.304897] 0x28
  871. [ 0.304902] 0x0
  872. [ 0.304907] 0x0
  873. [ 0.304912] **********end************
  874. [ 0.305553] print_constraints: axp20_ldo1: 1300 mV
  875. [ 0.307235] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  876. [ 0.308898] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  877. [ 0.310790] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  878. [ 0.312449] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  879. [ 0.314121] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  880. [ 0.315150] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  881. [ 0.315925] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
  882. [ 0.317146] Advanced Linux Sound Architecture Driver Version 1.0.24.
  883. [ 0.318305] Bluetooth: Core ver 2.16
  884. [ 0.318517] NET: Registered protocol family 31
  885. [ 0.318527] Bluetooth: HCI device and connection manager initialized
  886. [ 0.318541] Bluetooth: HCI socket layer initialized
  887. [ 0.318551] Bluetooth: L2CAP socket layer initialized
  888. [ 0.318579] Bluetooth: SCO socket layer initialized
  889. [ 0.319235] cfg80211: Calling CRDA to update world regulatory domain
  890. [ 0.319747] Switching to clocksource arch_sys_counter
  891. [ 0.320152] FS-Cache: Loaded
  892. [ 0.320528] CacheFiles: Loaded
  893. [ 0.342852] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  894. [ 0.343076] Line:1148:ohci_hcd_mod_init
  895. [ 0.343087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  896. [ 0.343268] line = 483,usb_manager_init
  897. [ 0.343275] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
  898. [ 0.343300] WRN:L173(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  899. [ 0.343314] WRN:L182(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  900. [ 0.343328] WRN:L201(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  901. [ 0.343341] WRN:L212(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  902. [ 0.343354] WRN:L224(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  903. [ 0.343369] WRN:L244(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  904. [ 0.343382] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  905. [ 0.343615] [sw_hcd0]: usb host driver initialize........
  906. [ 0.343935] [sw_udc]: udc_init: version 20080411
  907. [ 0.343990] [sw_udc]: usb_vbase = 0xf1c13000
  908. [ 0.343999] [sw_udc]: sram_vbase = 0xf1c00000
  909. [ 0.344038] [sw_udc]: open_usb_clock
  910. [ 0.363924] udc->driver is null, udc is need not stop
  911. [ 0.364913] NET: Registered protocol family 2
  912. [ 0.365369] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  913. [ 0.367659] TCP established hash table entries: 131072 (order: 8, 1048576 by)
  914. [ 0.371402] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  915. [ 0.372392] TCP: Hash tables configured (established 131072 bind 65536)
  916. [ 0.372404] TCP reno registered
  917. [ 0.372459] UDP hash table entries: 512 (order: 2, 16384 bytes)
  918. [ 0.372529] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  919. [ 0.372987] NET: Registered protocol family 1
  920. [ 0.373631] RPC: Registered named UNIX socket transport module.
  921. [ 0.373643] RPC: Registered udp transport module.
  922. [ 0.373651] RPC: Registered tcp transport module.
  923. [ 0.373659] RPC: Registered tcp NFSv4.1 backchannel transport module.
  924. [ 0.373940] sunxi_reg_init enter
  925. [ 0.375002] [pm]aw_pm_init!
  926. [ 0.375015] dram config [dram_para] [dram_baseaddr] : 1073741824
  927. [ 0.375025] dram config [dram_para] [dram_clk] : 480
  928. [ 0.375035] dram config [dram_para] [dram_type] : 3
  929. [ 0.375043] dram config [dram_para] [dram_rank_num] : -1
  930. [ 0.375052] dram config [dram_para] [dram_chip_density] : -1
  931. [ 0.375061] dram config [dram_para] [dram_io_width] : -1
  932. [ 0.375070] dram config [dram_para] [dram_bus_width] : -1
  933. [ 0.375079] dram config [dram_para] [dram_cas] : 9
  934. [ 0.375087] dram config [dram_para] [dram_zq] : 127
  935. [ 0.375096] dram config [dram_para] [dram_odt_en] : 0
  936. [ 0.375106] dram config [dram_para] [dram_size] : -1
  937. [ 0.375114] dram config [dram_para] [dram_tpr0] : 1121491383
  938. [ 0.375123] dram config [dram_para] [dram_tpr1] : 41104
  939. [ 0.375132] dram config [dram_para] [dram_tpr2] : 141824
  940. [ 0.375141] dram config [dram_para] [dram_tpr3] : 0
  941. [ 0.375149] dram config [dram_para] [dram_tpr4] : 1
  942. [ 0.375158] dram config [dram_para] [dram_tpr5] : 0
  943. [ 0.375166] dram config [dram_para] [dram_emr1] : 4
  944. [ 0.375175] dram config [dram_para] [dram_emr2] : 16
  945. [ 0.375184] dram config [dram_para] [dram_emr3] : 0
  946. [ 0.375193] standby_mode = 0.
  947. [ 0.375200] aw_pm_init: not support super standby.
  948. [ 0.375208] cpu0_en = 0.
  949. [ 0.375215] dram_selfresh_en = 1.
  950. [ 0.375223] wakeup src cnt is : 0.
  951. [ 0.375309] DRAM_STANDBY_PGD_ADDR:d201c000
  952. [ 0.375333] [wifi]: select wifi: rtl8188eu !!
  953. [ 0.375690] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
  954. [ 0.375705] [rtl8188eu]: module power name
  955. [ 0.375713] [rtl8188eu]: rtl8188eu module power set by axp.
  956. [ 0.375725] [rtl8188eu]: get power regulator failed.
  957. [ 0.375769] [wifi_pm]: wifi gpio init is OK !!
  958. [ 0.375959] [powernow inf] module init
  959. [ 0.376138] [powernow inf] create class sw_powernow done
  960. [ 0.377847] highmem bounce pool size: 64 pages
  961. [ 0.381802] NTFS driver 2.1.30 [Flags: R/W].
  962. [ 0.382081] fuse init (API version 7.18)
  963. [ 0.383217] msgmni has been set to 1122
  964. [ 0.384679] io scheduler noop registered
  965. [ 0.384691] io scheduler deadline registered (default)
  966. [ 0.393687] [uart]: driver initializied
  967. [ 0.394156] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SW
  968. [ 0.394179] [uart]: console setup baud 115200 parity n bits 8, flow n
  969. [ 0.394206] [uart]: uart0 LCR & BAUD changed, reset controller...
  970. [ 1.976897] console [ttyS0] enabled
  971. [ 1.982828] G2D: drv_g2d_init
  972. [ 1.986330] G2D: Module initialized.major:252
  973. [ 1.992020] sunmm_probe, line 269
  974. [ 2.002234] loop: module loaded
  975. [ 2.007284] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  976. [ 2.015175] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  977. [ 2.021573] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 ime
  978. [ 2.031067] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part
  979. [ 2.039823] dma_alloc_coherent mem = 0xffde0000, size = 0x16500, mem_dma=0x40
  980. [ 2.049532] scsi0 : sw_ahci_platform
  981. [ 2.054458] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x8
  982. [ 2.065616] tun: Universal TUN/TAP device driver, 1.6
  983. [ 2.071303] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  984. [ 2.078589] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
  985. [ 2.086404] PPP generic driver version 2.4.2
  986. [ 2.091966] PPP BSD Compression module registered
  987. [ 2.097241] PPP Deflate Compression module registered
  988. [ 2.103698] PPP MPPE Compression module registered
  989. [ 2.109078] NET: Registered protocol family 24
  990. [ 2.114128] PPTP driver version 0.8.5
  991. [ 2.119566] usbcore: registered new interface driver rtl8150
  992. [ 2.126243] usbcore: registered new interface driver asix
  993. [ 2.132647] usbcore: registered new interface driver qf9700
  994. [ 2.139084] usbcore: registered new interface driver cdc_ether
  995. [ 2.145899] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  996. [ 2.154292] [sw_hci_sun4i_init 1254]
  997. [ 2.158309] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrictd
  998. [ 2.167980] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrictd
  999. [ 2.177640] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrictd
  1000. [ 2.187241] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrictd
  1001. [ 2.197185] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0x0
  1002. [ 2.205929] [sw-ehci1]: open clock
  1003. [ 2.229601] [sw-ehci1]: open clock, 0x60(0x202c143), 0xcc(0x103)
  1004. [ 2.236350] [sw-ehci1]: Set USB Power ON
  1005. [ 2.240762] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  1006. [ 2.249177] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  1007. [ 2.257215] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
  1008. [ 2.263213] [ehci_run 736]
  1009. [ 2.279811] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  1010. [ 2.286803] hub 1-0:1.0: USB hub found
  1011. [ 2.291063] hub 1-0:1.0: 1 port detected
  1012. [ 2.296165] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0x4
  1013. [ 2.304912] [sw-ohci1]: open clock
  1014. [ 2.328599] [sw-ohci1]: open clock, 0x60(0x202c147), 0xcc(0x163)
  1015. [ 2.335392] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c147
  1016. [ 2.341852] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1017. [ 2.349886] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  1018. [ 2.357841] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
  1019. [ 2.409831] ata1: SATA link down (SStatus 0 SControl 300)
  1020. [ 2.424685] hub 2-0:1.0: USB hub found
  1021. [ 2.428922] hub 2-0:1.0: 1 port detected
  1022. [ 2.434072] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0x8
  1023. [ 2.442822] [sw-ehci2]: open clock
  1024. [ 2.466500] [sw-ehci2]: open clock, 0x60(0x202c14f), 0xcc(0x167)
  1025. [ 2.473249] [sw-ehci2]: Set USB Power ON
  1026. [ 2.477649] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  1027. [ 2.486070] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  1028. [ 2.494217] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
  1029. [ 2.500203] [ehci_run 736]
  1030. [ 2.549860] The port change to OHCI now!
  1031. [ 2.569815] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  1032. [ 2.576747] hub 3-0:1.0: USB hub found
  1033. [ 2.580993] hub 3-0:1.0: 1 port detected
  1034. [ 2.586065] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc
  1035. [ 2.594808] [sw-ohci2]: open clock
  1036. [ 2.618482] [sw-ohci2]: open clock, 0x60(0x202c15f), 0xcc(0x1e7)
  1037. [ 2.625236] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c15f
  1038. [ 2.631736] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1039. [ 2.639776] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  1040. [ 2.647809] sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
  1041. [ 2.714658] hub 4-0:1.0: USB hub found
  1042. [ 2.718893] hub 4-0:1.0: 1 port detected
  1043. [ 2.724121] usbcore: registered new interface driver cdc_acm
  1044. [ 2.730519] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
  1045. [ 2.739498] Initializing USB Mass Storage driver...
  1046. [ 2.745278] usbcore: registered new interface driver usb-storage
  1047. [ 2.752062] USB Mass Storage support registered.
  1048. [ 2.757698] usbcore: registered new interface driver usbserial
  1049. [ 2.764297] usbserial: USB Serial Driver core
  1050. [ 2.769359] USB Serial support registered for GSM modem (1-port)
  1051. [ 2.776537] usbcore: registered new interface driver option
  1052. [ 2.776556] usb 2-1: new low-speed USB device number 2 using sw-ohci
  1053. [ 2.790030] option: v0.7.2:USB Driver for GSM modems
  1054. [ 2.796116] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  1055. [ 2.803613] [sw_udc]: alloc request: ep(0xc075c0f0, ep0, 64), req(0xef308740)
  1056. [ 2.811641] [sw_udc]: sw_udc_pullup, is_on = 0
  1057. [ 2.816629] [sw_udc]: usbd_stop_work
  1058. [ 2.824083] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1059. [ 2.831905] android_usb gadget: Number of LUNs=3
  1060. [ 2.837087] lun0: LUN: removable file: (no medium)
  1061. [ 2.842602] lun1: LUN: removable file: (no medium)
  1062. [ 2.848076] lun2: LUN: removable file: (no medium)
  1063. [ 2.854237] android_usb gadget: android_usb ready
  1064. [ 2.860295] mousedev: PS/2 mouse device common for all mice
  1065. [ 2.866900] input: sw-keyboard as /devices/virtual/input/input0
  1066. [ 2.874633] input: sun7i-ir as /devices/virtual/input/input1
  1067. [ 2.881689] uinput result 0 , vmouse_init
  1068. [ 2.886718] input: vmouse as /devices/virtual/input/input2
  1069. [ 2.894131] =====ctp_fetch_sysconfig_para=====.
  1070. [ 2.899317] ctp_fetch_sysconfig_para: ctp_unused.
  1071. [ 2.904744] ctp_init: ctp_fetch_sysconfig_para err.
  1072. [ 2.910816] sunxi_rtc_init: enter
  1073. [ 2.914846] rtc_hw_init(400): start
  1074. [ 2.918856] rtc_hw_init(431): end
  1075. [ 2.922739] sunxi_rtc_gettime, line 39
  1076. [ 2.926941] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  1077. [ 2.932523] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  1078. [ 2.939454] sunxi_rtc_gettime(67): read time 2000-1-1 0:0:45
  1079. [ 2.945929] sunxi_rtc_getalarm(269): year < 70, so add 100, to check
  1080. [ 2.953104] sunxi_rtc_getalarm(281): get alarm time 2000-1-1 0:0:0
  1081. [ 2.960674] using rtc device, rtc, for alarms
  1082. [ 2.965409] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  1083. [ 2.972705] i2c /dev entries driver
  1084. [ 2.978010] lirc_dev: IR Remote Control driver registered, major 249
  1085. [ 2.985347] IR NEC protocol handler initialized
  1086. [ 2.990457] IR RC5(x) protocol handler initialized
  1087. [ 2.995856] IR RC6 protocol handler initialized
  1088. [ 3.001071] IR JVC protocol handler initialized
  1089. [ 3.006184] IR Sony protocol handler initialized
  1090. [ 3.011400] IR RC5 (streamzap) protocol handler initialized
  1091. [ 3.017682] IR SANYO protocol handler initialized
  1092. [ 3.022986] IR MCE Keyboard/mouse protocol handler initialized
  1093. [ 3.029554] IR LIRC bridge handler initialized
  1094. [ 3.034555] Linux video capture interface: v2.00
  1095. [ 3.040528] [hx-cedar dev]: install start!!!
  1096. [ 3.046951] [cedar dev]: install end!!!
  1097. [ 3.051703] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-03
  1098. [ 3.073251] pmu_pekoff_time = 6000
  1099. [ 3.077070] pmu_pekoff_en = 1
  1100. [ 3.080412] pmu_peklong_time = 1500
  1101. [ 3.084319] pmu_pekon_time = 1000
  1102. [ 3.088030] pmu_pwrok_time = 64
  1103. [ 3.091566] pmu_pwrnoe_time = 2000
  1104. [ 3.095377] pmu_intotp_en = 1
  1105. [ 3.099299] [AXP]POWER20_OFF_CTL:2070-->0x42
  1106. [ 3.104706] POWER20_PEK_SET:2087-->0x9d
  1107. [ 3.109601] POWER20_PEK_SET:2098-->0x9d
  1108. [ 3.114589] POWER20_PEK_SET:2107-->0x9d
  1109. [ 3.119483] POWER20_PEK_SET:2118-->0x9d
  1110. [ 3.124395] POWER20_PEK_SET:2130-->0x9d
  1111. [ 3.129288] POWER20_HOTOVER_CTL:2139-->0xad
  1112. [ 3.138529] [AXP]last_rest_vol = 0, now_rest_vol = 100
  1113. [ 3.145339] [AXP]charger->rest_vol = 100
  1114. [ 3.153138] create_regulator: axp20_ldo2: Failed to create debugfs directory
  1115. [ 3.161112] regulator_virtual_consumer_probe:get regulator:axp20_analog/fm ok
  1116. [ 3.169456] regulator_virtual_consumer_probe:get regulator:axp20_pll ok
  1117. [ 3.177257] regulator_virtual_consumer_probe:get regulator:axp20_hdmi ok
  1118. [ 3.185261] create_regulator: axp20_buck2: Failed to create debugfs directory
  1119. [ 3.193318] regulator_virtual_consumer_probe:get regulator:axp20_core ok
  1120. [ 3.201171] regulator_virtual_consumer_probe:get regulator:axp20_ddr ok
  1121. [ 3.208866] regulator_virtual_consumer_probe:get regulator:axp20_mic ok
  1122. [ 3.217134] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-m
  1123. [ 3.227069] device-mapper: multipath: version 1.3.0 loaded
  1124. [ 3.233307] device-mapper: multipath round-robin: version 1.0.0 loaded
  1125. [ 3.240646] device-mapper: multipath queue-length: version 0.1.0 loaded
  1126. [ 3.248064] device-mapper: multipath service-time: version 0.2.0 loaded
  1127. [ 3.255740] Bluetooth: HCI UART driver ver 2.2
  1128. [ 3.260743] Bluetooth: HCI H4 protocol initialized
  1129. [ 3.266113] Bluetooth: HCI BCSP protocol initialized
  1130. [ 3.271774] Bluetooth: HCILL protocol initialized
  1131. [ 3.277050] Bluetooth: HCIATH3K protocol initialized
  1132. [ 3.282633] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  1133. [ 3.288846] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
  1134. [ 3.288853]
  1135. [ 3.297899] [gpio-err] __pio_to_irq: invalid pio to irq
  1136. [ 3.304692] [fantasy] err get cpu normal frequency from sysconfig failed
  1137. [ 3.312476] [mmc-msg] sw_mci_init
  1138. [ 3.316226] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  1139. [ 3.325023] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  1140. [ 3.336255] [mmc-msg] sdc0 Probe: base:0xf003e000 irq:64 sg_cpu:ffdde000(4fc.
  1141. [ 3.346012] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  1142. [ 3.357313] [mmc-msg] sdc3 Probe: base:0xf0094000 irq:67 sg_cpu:ffddd000(4fc.
  1143. [ 3.366692] sunxi_leds driver init
  1144. [ 3.370562] request gpio187, ret=0
  1145. [ 3.374366] trigger_name:
  1146. [ 3.377298] request gpio188, ret=0
  1147. [ 3.381167] trigger_name:heartbeat
  1148. [ 3.385575] Registered led device: green:ph20:led1
  1149. [ 3.391173] Registered led device: blue:ph21:led2
  1150. [ 3.407270] input: Genius Optical Mouse as /devices/platform/sw-ohci.14
  1151. [ 3.418898] generic-usb 0003:0458:003A.0001: input: USB HID v1.10 Mouse [Gen0
  1152. [ 3.431776] usbcore: registered new interface driver usbhid
  1153. [ 3.438003] usbhid: USB HID core driver
  1154. [ 3.443390] ashmem: initialized
  1155. [ 3.447185] logger: created 256K log 'log_main'
  1156. [ 3.452700] logger: created 256K log 'log_events'
  1157. [ 3.458281] logger: created 256K log 'log_radio'
  1158. [ 3.463848] logger: created 256K log 'log_system'
  1159. [ 3.470518] usbcore: registered new interface driver snd-usb-audio
  1160. [ 3.478267] value is 1
  1161. [ 3.481350] enter sun7i Audio codec!!!
  1162. [ 3.487093] sun7i audio support initialized
  1163. [ 3.492140] sun7i Audio codec successfully loaded..
  1164. [ 3.500463] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
  1165. [ 3.507821] [SPDIF]sun7i-spdif cannot find any using configuration for contr!
  1166. [ 3.519189] [SPDIF]sun7i_sndspdif cannot find any using configuration for co!
  1167. [ 3.529958] [I2S] i2s_select type err!
  1168. [ 3.534143] [I2S]sun7i-i2s cannot find any using configuration for controlle!
  1169. [ 3.544610] [I2S]sndi2s cannot find any using configuration for controllers,!
  1170. [ 3.554360] [I2S] i2s_master type err!
  1171. [ 3.558546] [I2S] audio_format type err!
  1172. [ 3.562947] [I2S] signal_inversion type err!
  1173. [ 3.567711] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  1174. [ 3.577838] func:sun7i_pcm_init(line:953)sun7i-pcm.c
  1175. [ 3.583397] [PCM] type err!
  1176. [ 3.586507] [PCM] i2s_select type err!
  1177. [ 3.590851] func:sun7i_pcm_init(line:964)sun7i-pcm.c,pcm_used:-284983396
  1178. [ 3.598349] get pcm_para gpio list failed
  1179. [ 3.602848] func:sun7i_soc_platform_i2s_init(line:803)sun7i-pcmdma.c
  1180. [ 3.610651] func:sndpcm_codec_init(line:181)sndpcm.c
  1181. [ 3.616203] [PCM] type err!
  1182. [ 3.619322] func:sndpcm_codec_init(line:187)sndpcm.c,pcm_used:0
  1183. [ 3.625997] [PCM]sndi2s cannot find any using configuration for controllers,!
  1184. [ 3.635586] pcm_used type err
  1185. [ 3.638994] [PCM] pcm_master type err!
  1186. [ 3.643200] [PCM] audio_format type err!
  1187. [ 3.647580] [PCM] signal_inversion type err!
  1188. [ 3.652362] func:sun7i_sndpcm_init(line:209)sun7i-sndpcm.c,pcm_used:0
  1189. [ 3.659552] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  1190. [ 3.669661] ALSA device list:
  1191. [ 3.673025] #0: sun7i-CODEC Audio Codec
  1192. [ 3.677600] #1: sndhdmi
  1193. [ 3.680757] Netfilter messages via NETLINK v0.30.
  1194. [ 3.686119] nf_conntrack version 0.5.0 (13202 buckets, 52808 max)
  1195. [ 3.693511] ctnetlink v0.93: registering with nfnetlink.
  1196. [ 3.699566] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1197. [ 3.707388] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1198. [ 3.715124] xt_time: kernel timezone is -0000
  1199. [ 3.720087] IPv4 over IPv4 tunneling driver
  1200. [ 3.725835] GRE over IPv4 demultiplexor driver
  1201. [ 3.730645] GRE over IPv4 tunneling driver
  1202. [ 3.736687] ip_tables: (C) 2000-2006 Netfilter Core Team
  1203. [ 3.742925] TCP cubic registered
  1204. [ 3.746524] Initializing XFRM netlink socket
  1205. [ 3.751777] NET: Registered protocol family 10
  1206. [ 3.758058] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1207. [ 3.764353] IPv6 over IPv4 tunneling driver
  1208. [ 3.771466] NET: Registered protocol family 17
  1209. [ 3.776503] NET: Registered protocol family 15
  1210. [ 3.781702] Bluetooth: RFCOMM TTY layer initialized
  1211. [ 3.787170] Bluetooth: RFCOMM socket layer initialized
  1212. [ 3.793162] Bluetooth: RFCOMM ver 1.11
  1213. [ 3.797354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1214. [ 3.803309] Bluetooth: BNEP filters: protocol multicast
  1215. [ 3.809148] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1216. [ 3.816112] L2TP core driver, V2.0
  1217. [ 3.819959] PPPoL2TP kernel driver, V2.0
  1218. [ 3.824337] L2TP IP encapsulation support (L2TPv3)
  1219. [ 3.830022] L2TP netlink interface
  1220. [ 3.833862] L2TP ethernet pseudowire support (L2TPv3)
  1221. [ 3.839507] Registering the dns_resolver key type
  1222. [ 3.844862] VFP support v0.3: implementor 41 architecture 2 part 30 variant 4
  1223. [ 3.853459] ThumbEE CPU extension supported.
  1224. [ 3.858239] [rfkill]: init no bt used in configuration
  1225. [ 3.865867] regulator_init_complete: axp20_buck3: incomplete constraints, len
  1226. [ 3.874935] regulator_init_complete: axp20_buck2: incomplete constraints, len
  1227. [ 3.883938] regulator_init_complete: axp20_ldo4: incomplete constraints, lean
  1228. [ 3.892839] regulator_init_complete: axp20_ldo3: incomplete constraints, lean
  1229. [ 3.901738] regulator_init_complete: axp20_ldo2: incomplete constraints, lean
  1230. [ 3.910717] regulator_init_complete: axp20_ldo1: incomplete constraints, lean
  1231. [ 3.919352] sunxi_rtc_gettime, line 39
  1232. [ 3.923559] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  1233. [ 3.929100] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  1234. [ 3.936021] sunxi_rtc_gettime(67): read time 2000-1-1 0:0:46
  1235. [ 3.942386] sunxi-rtc sunxi-rtc: setting system clock to 2000-01-01 00:00:46)
  1236. [ 3.952368] Waiting for root device /dev/mmcblk0p3...
  1237. [ 4.324781] [mmc-msg] mmc 0 detect change, present 1
  1238. [ 4.829830] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timB
  1239. [ 4.839864] [mmc-msg] sdc0 power on
  1240. [ 4.859812] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1241. [ 4.942138] [mmc-err] smc 0 err, cmd 52, RTO
  1242. [ 4.947839] [mmc-err] smc 0 err, cmd 52, RTO
  1243. [ 4.952722] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1244. [ 4.965629] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1245. [ 4.978291] [mmc-err] smc 0 err, cmd 5, RTO
  1246. [ 4.983885] [mmc-err] smc 0 err, cmd 5, RTO
  1247. [ 4.989470] [mmc-err] smc 0 err, cmd 5, RTO
  1248. [ 4.995065] [mmc-err] smc 0 err, cmd 5, RTO
  1249. [ 5.000484] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1250. [ 5.011024] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1251. [ 5.023927] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1252. [ 5.062982] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1253. [ 5.073432] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  1254. [ 5.139162] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  1255. [ 5.149822] mmc0: new high speed SDHC card at address 0007
  1256. [ 5.156633] mmcblk0: mmc0:0007 SD04G 3.70 GiB
  1257. [ 5.174005] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
  1258. [ 5.272502] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incoms
  1259. [ 5.351548] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incoms
  1260. [ 5.449989] EXT4-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fd
  1261. [ 5.547104] EXT4-fs (mmcblk0p3): recovery complete
  1262. [ 5.552503] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. )
  1263. [ 5.561612] VFS: Mounted root (ext4 filesystem) on device 179:3.
  1264. [ 5.570176] devtmpfs: mounted
  1265. [ 5.573852] Freeing init memory: 196K
  1266. [ 5.578009] Failed to execute /init. Attempting defaults...
  1267. [ 5.586367] Kernel panic - not syncing: No init found. Try passing init= op.
  1268. [ 5.600296] CPU0: stopping
  1269. [ 5.603342] [<c00144c4>] (unwind_backtrace+0x0/0xe0) from [<c0012940>] (hand)
  1270. [ 5.612954] [<c0012940>] (handle_IPI+0xf8/0x1d8) from [<c0008504>] (gic_hand)
  1271. [ 5.622467] [<c0008504>] (gic_handle_irq+0x8c/0x9c) from [<c000d540>] (__irq)
  1272. [ 5.631771] Exception stack(0xc0731f70 to 0xc0731fb8)
  1273. [ 5.637399] 1f60: 00000003 00000001 c0730
  1274. [ 5.646518] 1f80: c0730000 c077ec48 c04fb8b8 c0740b10 4000406a 410fc074 00000
  1275. [ 5.655639] 1fa0: 00000000 c0731fb8 c000ead0 c000ead4 60000013 ffffffff
  1276. [ 5.663023] [<c000d540>] (__irq_svc+0x40/0x70) from [<c000ead4>] (default_id)
  1277. [ 5.672149] [<c000ead4>] (default_idle+0x24/0x28) from [<c000ee3c>] (cpu_idl)
  1278. [ 5.681181] [<c000ee3c>] (cpu_idle+0x88/0xe8) from [<c06fe7a4>] (start_kerne)
  1279. [ 5.690396] [hotplug]: try to kill cpu:0 failed!
  1280. [ 5.695565] Rebooting in 10 seconds..
  1281. [ 15.768699] Restarting Linux version 3.3.0 (rolivo@build) (gcc version 4.6.33
  1282. [ 15.768713]
  1283. [ 15.791290] sun7i_restart: to check
  1284.  
  1285. U-Boot SPL 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49)
  1286. Board: Cubieboard2
  1287. DRAM: 1024MB
  1288. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  1289. SUNXI SD/MMC: 0
  1290.  
  1291.  
  1292. U-Boot 2013.04-07297-gc8f265c-dirty (Jun 23 2013 - 14:31:49) Allwinner Technoloy
  1293.  
  1294. CPU: Allwinner A20 (SUN7I)
  1295. Board: Cubieboard2
  1296. I2C: ready
  1297. DRAM: 1 GiB
  1298. MMC: SUNXI SD/MMC: 0
  1299. *** Warning - bad CRC, using default environment
  1300.  
  1301. In: serial
  1302. Out: serial
  1303. Err: serial
  1304. Net: emac
  1305. Hit any key to stop autoboot: 0
  1306. reading uEnv.txt
  1307. 260 bytes read in 5 ms (50.8 KiB/s)
  1308. Loaded environment from uEnv.txt
  1309. reading boot.scr
  1310. ** Unable to read file boot.scr **
  1311. Failed to mount ext2 filesystem...
  1312. ** Unrecognized filesystem type **
  1313. Failed to mount ext2 filesystem...
  1314. ** Unrecognized filesystem type **
  1315. Failed to mount ext2 filesystem...
  1316. ** Unrecognized filesystem type **
  1317. reading script.bin
  1318. 45088 bytes read in 9 ms (4.8 MiB/s)
  1319. reading uImage
  1320. 3887904 bytes read in 182 ms (20.4 MiB/s)
  1321. ## Booting kernel from Legacy Image at 48000000 ...
  1322. Image Name:
  1323. Created: 2013-09-18 9:15:49 UTC
  1324. Image Type: ARM Linux Kernel Image (uncompressed)
  1325. Data Size: 3887840 Bytes = 3.7 MiB
  1326. Load Address: 40008000
  1327. Entry Point: 40008000
  1328. Verifying Checksum ... OK
  1329. Loading Kernel Image ... OK
  1330. OK
  1331.  
  1332. Starting kernel ...
  1333.  
  1334. [ 0.000000] Booting Linux on physical CPU 0
  1335. [ 0.000000] Initializing cgroup subsys cpuset
  1336. [ 0.000000] Initializing cgroup subsys cpu
  1337. [ 0.000000] Linux version 3.3.0 (rolivo@build) (gcc version 4.6.3 20120201 (3
  1338. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
  1339. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
  1340. [ 0.000000] Machine: sun7i
  1341. [ 0.000000] [sun7i_fixup]: From boot, get meminfo:
  1342. [ 0.000000] Start: 0x40000000
  1343. [ 0.000000] Size: 1024MB
  1344. [ 0.000000] memory reserved(in bytes):
  1345. [ 0.000000] : 0x43000000, 0x00010000
  1346. [ 0.000000] : 0x52000000, 0x00020000
  1347. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  1348. [ 0.000000] On node 0 totalpages: 216064
  1349. [ 0.000000] free_area_init_node: node 0, pgdat c077dc00, node_mem_map d000000
  1350. [ 0.000000] DMA zone: 576 pages used for memmap
  1351. [ 0.000000] DMA zone: 0 pages reserved
  1352. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  1353. [ 0.000000] Normal zone: 1134 pages used for memmap
  1354. [ 0.000000] Normal zone: 81810 pages, LIFO batch:15
  1355. [ 0.000000] HighMem zone: 594 pages used for memmap
  1356. [ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
  1357. [ 0.000000] [scu_get_core_count] cores=1800001
  1358. [ 0.000000] sun7i_init_early: enter
  1359. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0908000 s5504 r8192 d14976 u32768
  1360. [ 0.000000] pcpu-alloc: s5504 r8192 d14976 u32768 alloc=8*4096
  1361. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  1362. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
  1363. [ 0.000000] Kernel command line: console=ttyS0,115200 root= loglevel=8 panic9
  1364. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  1365. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1366. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1367. [ 0.000000] Memory: 64MB 780MB = 844MB total
  1368. [ 0.000000] Memory: 844956k/844956k available, 203620k reserved, 270336K higm
  1369. [ 0.000000] Virtual kernel memory layout:
  1370. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1371. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  1372. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  1373. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  1374. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1375. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  1376. [ 0.000000] .text : 0xc0008000 - 0xc06fd7ac (7126 kB)
  1377. [ 0.000000] .init : 0xc06fe000 - 0xc072f580 ( 198 kB)
  1378. [ 0.000000] .data : 0xc0730000 - 0xc077eb20 ( 315 kB)
  1379. [ 0.000000] .bss : 0xc077eb44 - 0xc08c9cf8 (1325 kB)
  1380. [ 0.000000] Preemptible hierarchical RCU implementation.
  1381. [ 0.000000] NR_IRQS:160
  1382. [ 0.000000] aw_clkevt_init: timer base 0xf000cc00
  1383. [ 0.000000] [aw_delay]: It is use use_time_delay function!
  1384. [ 0.000000] aw_clksrc_init(96)
  1385. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 1789s
  1386. [ 0.000000] aw_clksrc_init(120)
  1387. [ 0.000000] Architected local timer running at 24.00MHz.
  1388. [ 0.000000] Console: colour dummy device 80x30
  1389. [ 0.000468] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  1390. [ 0.059961] pid_max: default: 32768 minimum: 301
  1391. [ 0.060353] Mount-cache hash table entries: 512
  1392. [ 0.061039] CPU: Testing write buffer coherency: ok
  1393. [ 0.061340] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  1394. [ 0.061434] Setting up static identity map for 0x404f8b80 - 0x404f8bd8
  1395. [ 0.174273] CPU1: Booted secondary processor
  1396. [ 0.231629] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1397. [ 0.231724] Brought up 2 CPUs
  1398. [ 0.231735] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  1399. [ 0.232618] devtmpfs: initialized
  1400. [ 0.236740] script_init enter!
  1401. [ 0.237565] script_init exit!
  1402. [ 0.238214] kworker/u:0 used greatest stack depth: 6576 bytes left
  1403. [ 0.239267] print_constraints: dummy:
  1404. [ 0.239552] kworker/u:0 used greatest stack depth: 6408 bytes left
  1405. [ 0.239906] NET: Registered protocol family 16
  1406. [ 0.240209] sunxi_dump_init success
  1407. [ 0.242045] sun7i_init: enter
  1408. [ 0.242663] [ccu-inf] aw clock manager init
  1409. [ 0.242675] [ccu-inf] aw_ccu_init
  1410. [ 0.242874] [ccu-inf] script config pll3 to 297MHz
  1411. [ 0.242889] [ccu-inf] script config pll4 to 300MHz
  1412. [ 0.242901] [ccu-inf] script config pll6 to 600MHz
  1413. [ 0.242912] [ccu-inf] script config pll7 to 297MHz
  1414. [ 0.242922] [ccu-inf] script config pll8 to 336MHz
  1415. [ 0.243527] axp config [pmu_para] [pmu_used] : 1
  1416. [ 0.243539] axp config [pmu_para] [pmu_twi_id] : 0
  1417. [ 0.243548] axp config [pmu_para] [pmu_irq_id] : 32
  1418. [ 0.243558] axp config [pmu_para] [pmu_twi_addr] : 52
  1419. [ 0.243567] axp config [pmu_para] [pmu_battery_rdc] : 120
  1420. [ 0.243576] axp config [pmu_para] [pmu_battery_cap] : 2100
  1421. [ 0.243588] axp config [pmu_para] [pmu_init_chgcur] : 300
  1422. [ 0.243598] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
  1423. [ 0.243608] axp config [pmu_para] [pmu_resume_chgcur] : 300
  1424. [ 0.243618] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
  1425. [ 0.243628] axp config [pmu_para] [pmu_init_chgvol] : 4200
  1426. [ 0.243638] axp config [pmu_para] [pmu_init_chgend_rate] : 15
  1427. [ 0.243648] axp config [pmu_para] [pmu_init_chg_enabled] : 1
  1428. [ 0.243657] axp config [pmu_para] [pmu_init_adc_freq] : 100
  1429. [ 0.243667] axp config [pmu_para] [pmu_init_adc_freqc] : 100
  1430. [ 0.243677] axp config [pmu_para] [pmu_init_chg_pretime] : 50
  1431. [ 0.243687] axp config [pmu_para] [pmu_init_chg_csttime] : 720
  1432. [ 0.243697] axp config [pmu_para] [pmu_bat_para1] : 0
  1433. [ 0.243706] axp config [pmu_para] [pmu_bat_para2] : 0
  1434. [ 0.243715] axp config [pmu_para] [pmu_bat_para3] : 0
  1435. [ 0.243728] axp config [pmu_para] [pmu_bat_para4] : 0
  1436. [ 0.243737] axp config [pmu_para] [pmu_bat_para5] : 5
  1437. [ 0.243747] axp config [pmu_para] [pmu_bat_para6] : 11
  1438. [ 0.243756] axp config [pmu_para] [pmu_bat_para7] : 13
  1439. [ 0.243766] axp config [pmu_para] [pmu_bat_para8] : 15
  1440. [ 0.243775] axp config [pmu_para] [pmu_bat_para9] : 19
  1441. [ 0.243785] axp config [pmu_para] [pmu_bat_para10] : 32
  1442. [ 0.243796] axp config [pmu_para] [pmu_bat_para11] : 50
  1443. [ 0.243806] axp config [pmu_para] [pmu_bat_para12] : 58
  1444. [ 0.243815] axp config [pmu_para] [pmu_bat_para13] : 71
  1445. [ 0.243825] axp config [pmu_para] [pmu_bat_para14] : 81
  1446. [ 0.243834] axp config [pmu_para] [pmu_bat_para15] : 89
  1447. [ 0.243844] axp config [pmu_para] [pmu_bat_para16] : 100
  1448. [ 0.243854] axp config [pmu_para] [pmu_usbvol_limit] : 1
  1449. [ 0.243863] axp config [pmu_para] [pmu_usbvol] : 4000
  1450. [ 0.243873] axp config [pmu_para] [pmu_usbcur_limit] : 0
  1451. [ 0.243882] axp config [pmu_para] [pmu_usbcur] : 0
  1452. [ 0.243891] axp config [pmu_para] [pmu_pwroff_vol] : 3300
  1453. [ 0.243901] axp config [pmu_para] [pmu_pwron_vol] : 2900
  1454. [ 0.243911] axp config [target] [dcdc2_vol] : 1400
  1455. [ 0.243920] axp config [target] [dcdc3_vol] : 1250
  1456. [ 0.243928] axp config [target] [ldo2_vol] : 3000
  1457. [ 0.243937] axp config [target] [ldo3_vol] : 2800
  1458. [ 0.243946] axp config [target] [ldo4_vol] : 2800
  1459. [ 0.243955] axp config [pmu_para] [pmu_pekoff_time] : 6000
  1460. [ 0.243965] axp config [pmu_para] [pmu_pekoff_en] : 1
  1461. [ 0.243974] axp config [pmu_para] [pmu_peklong_time] : 1500
  1462. [ 0.243984] axp config [pmu_para] [pmu_pwrok_time] : 64
  1463. [ 0.243994] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
  1464. [ 0.244004] axp config [pmu_para] [pmu_intotp_en] : 1
  1465. [ 0.244013] axp config [pmu_para] [pmu_pekon_time] : 1000
  1466. [ 0.244388] [gpio-inf] aw gpio init start
  1467. [ 0.244415] [gpio-inf] gpio_clk_init: apb pio clk enable success
  1468. [ 0.244648] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
  1469. [ 0.244846] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
  1470. [ 0.245047] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
  1471. [ 0.245236] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
  1472. [ 0.245433] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
  1473. [ 0.245606] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
  1474. [ 0.245827] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
  1475. [ 0.246059] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
  1476. [ 0.246250] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
  1477. [ 0.246632] [gpio-inf] aw gpio init done
  1478. [ 0.291033] bio: create slab <bio-0> at 0
  1479. [ 0.293089] SCSI subsystem initialized
  1480. [ 0.293555] libata version 3.00 loaded.
  1481. [ 0.294484] usbcore: registered new interface driver usbfs
  1482. [ 0.294866] usbcore: registered new interface driver hub
  1483. [ 0.295183] usbcore: registered new device driver usb
  1484. [ 0.295875] [i2c3] fetch para from sysconfig failed
  1485. [ 0.295886] [i2c4] fetch para from sysconfig failed
  1486. [ 0.297136] -------------------------------------------
  1487. [ 0.297148] axp_mfd_probe:axp20_mfd pmu probed !
  1488. [ 0.297155] -------------------------------------------
  1489. [ 0.299491] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  1490. [ 0.300170] -------------------------------------------
  1491. [ 0.300179] axp_mfd_probe:axp20_mfd pmu request_irq ok !
  1492. [ 0.300186] -------------------------------------------
  1493. [ 0.304096] [AXP]axp driver uning configuration failed(348)
  1494. [ 0.304107] [AXP]power_start = 0
  1495. [ 0.304136] I2C: i2c-0: sun7i I2C adapter
  1496. [ 0.304143] **********start************
  1497. [ 0.304150] 0x40
  1498. [ 0.304155] 0xf8
  1499. [ 0.304161] 0x58
  1500. [ 0.304166] 0x0
  1501. [ 0.304171] 0x0
  1502. [ 0.304176] **********end************
  1503. [ 0.304617] I2C: i2c-1: sun7i I2C adapter
  1504. [ 0.304626] **********start************
  1505. [ 0.304633] 0x40
  1506. [ 0.304638] 0xf8
  1507. [ 0.304644] 0x58
  1508. [ 0.304649] 0x0
  1509. [ 0.304654] 0x0
  1510. [ 0.304659] **********end************
  1511. [ 0.304984] I2C: i2c-2: sun7i I2C adapter
  1512. [ 0.304991] **********start************
  1513. [ 0.304998] 0x40
  1514. [ 0.305004] 0xf8
  1515. [ 0.305009] 0x28
  1516. [ 0.305014] 0x0
  1517. [ 0.305019] 0x0
  1518. [ 0.305024] **********end************
  1519. [ 0.305666] print_constraints: axp20_ldo1: 1300 mV
  1520. [ 0.307373] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  1521. [ 0.309037] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  1522. [ 0.310926] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  1523. [ 0.312585] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  1524. [ 0.314283] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  1525. [ 0.315324] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  1526. [ 0.316090] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
  1527. [ 0.317304] Advanced Linux Sound Architecture Driver Version 1.0.24.
  1528. [ 0.318424] Bluetooth: Core ver 2.16
  1529. [ 0.318630] NET: Registered protocol family 31
  1530. [ 0.318640] Bluetooth: HCI device and connection manager initialized
  1531. [ 0.318658] Bluetooth: HCI socket layer initialized
  1532. [ 0.318667] Bluetooth: L2CAP socket layer initialized
  1533. [ 0.318695] Bluetooth: SCO socket layer initialized
  1534. [ 0.319402] cfg80211: Calling CRDA to update world regulatory domain
  1535. [ 0.319991] Switching to clocksource arch_sys_counter
  1536. [ 0.320376] FS-Cache: Loaded
  1537. [ 0.320750] CacheFiles: Loaded
  1538. [ 0.342469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1539. [ 0.342721] Line:1148:ohci_hcd_mod_init
  1540. [ 0.342730] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1541. [ 0.342938] line = 483,usb_manager_init
  1542. [ 0.342946] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
  1543. [ 0.342968] WRN:L173(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1544. [ 0.342982] WRN:L182(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1545. [ 0.342996] WRN:L201(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1546. [ 0.343009] WRN:L212(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1547. [ 0.343023] WRN:L224(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1548. [ 0.343038] WRN:L244(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1549. [ 0.343051] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get ud
  1550. [ 0.343303] [sw_hcd0]: usb host driver initialize........
  1551. [ 0.343685] [sw_udc]: udc_init: version 20080411
  1552. [ 0.343746] [sw_udc]: usb_vbase = 0xf1c13000
  1553. [ 0.343756] [sw_udc]: sram_vbase = 0xf1c00000
  1554. [ 0.343796] [sw_udc]: open_usb_clock
  1555. [ 0.363684] udc->driver is null, udc is need not stop
  1556. [ 0.364683] NET: Registered protocol family 2
  1557. [ 0.365154] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  1558. [ 0.367437] TCP established hash table entries: 131072 (order: 8, 1048576 by)
  1559. [ 0.372322] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  1560. [ 0.373315] TCP: Hash tables configured (established 131072 bind 65536)
  1561. [ 0.373327] TCP reno registered
  1562. [ 0.373383] UDP hash table entries: 512 (order: 2, 16384 bytes)
  1563. [ 0.373452] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1564. [ 0.373903] NET: Registered protocol family 1
  1565. [ 0.374479] RPC: Registered named UNIX socket transport module.
  1566. [ 0.374491] RPC: Registered udp transport module.
  1567. [ 0.374499] RPC: Registered tcp transport module.
  1568. [ 0.374507] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1569. [ 0.374805] sunxi_reg_init enter
  1570. [ 0.375875] [pm]aw_pm_init!
  1571. [ 0.375888] dram config [dram_para] [dram_baseaddr] : 1073741824
  1572. [ 0.375898] dram config [dram_para] [dram_clk] : 480
  1573. [ 0.375907] dram config [dram_para] [dram_type] : 3
  1574. [ 0.375915] dram config [dram_para] [dram_rank_num] : -1
  1575. [ 0.375924] dram config [dram_para] [dram_chip_density] : -1
  1576. [ 0.375934] dram config [dram_para] [dram_io_width] : -1
  1577. [ 0.375943] dram config [dram_para] [dram_bus_width] : -1
  1578. [ 0.375952] dram config [dram_para] [dram_cas] : 9
  1579. [ 0.375961] dram config [dram_para] [dram_zq] : 127
  1580. [ 0.375970] dram config [dram_para] [dram_odt_en] : 0
  1581. [ 0.375978] dram config [dram_para] [dram_size] : -1
  1582. [ 0.375987] dram config [dram_para] [dram_tpr0] : 1121491383
  1583. [ 0.375996] dram config [dram_para] [dram_tpr1] : 41104
  1584. [ 0.376005] dram config [dram_para] [dram_tpr2] : 141824
  1585. [ 0.376013] dram config [dram_para] [dram_tpr3] : 0
  1586. [ 0.376022] dram config [dram_para] [dram_tpr4] : 1
  1587. [ 0.376030] dram config [dram_para] [dram_tpr5] : 0
  1588. [ 0.376039] dram config [dram_para] [dram_emr1] : 4
  1589. [ 0.376047] dram config [dram_para] [dram_emr2] : 16
  1590. [ 0.376056] dram config [dram_para] [dram_emr3] : 0
  1591. [ 0.376065] standby_mode = 0.
  1592. [ 0.376073] aw_pm_init: not support super standby.
  1593. [ 0.376082] cpu0_en = 0.
  1594. [ 0.376088] dram_selfresh_en = 1.
  1595. [ 0.376096] wakeup src cnt is : 0.
  1596. [ 0.376178] DRAM_STANDBY_PGD_ADDR:d201c000
  1597. [ 0.376203] [wifi]: select wifi: rtl8188eu !!
  1598. [ 0.376532] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
  1599. [ 0.376546] [rtl8188eu]: module power name
  1600. [ 0.376553] [rtl8188eu]: rtl8188eu module power set by axp.
  1601. [ 0.376567] [rtl8188eu]: get power regulator failed.
  1602. [ 0.376592] [wifi_pm]: wifi gpio init is OK !!
  1603. [ 0.376781] [powernow inf] module init
  1604. [ 0.376963] [powernow inf] create class sw_powernow done
  1605. [ 0.378679] highmem bounce pool size: 64 pages
  1606. [ 0.381771] NTFS driver 2.1.30 [Flags: R/W].
  1607. [ 0.382031] fuse init (API version 7.18)
  1608. [ 0.383223] msgmni has been set to 1122
  1609. [ 0.384700] io scheduler noop registered
  1610. [ 0.384711] io scheduler deadline registered (default)
  1611. [ 0.393295] [uart]: driver initializied
  1612. [ 0.393766] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SW
  1613. [ 0.393789] [uart]: console setup baud 115200 parity n bits 8, flow n
  1614. [ 0.393815] [uart]: uart0 LCR & BAUD changed, reset controller...
  1615. [ 1.977184] console [ttyS0] enabled
  1616. [ 1.982662] G2D: drv_g2d_init
  1617. [ 1.986169] G2D: Module initialized.major:252
  1618. [ 1.992862] sunmm_probe, line 269
  1619. [ 2.003056] loop: module loaded
  1620. [ 2.008128] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  1621. [ 2.016028] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  1622. [ 2.022226] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 ime
  1623. [ 2.031721] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part
  1624. [ 2.040988] dma_alloc_coherent mem = 0xffde0000, size = 0x16500, mem_dma=0x40
  1625. [ 2.050863] scsi0 : sw_ahci_platform
  1626. [ 2.055698] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x8
  1627. [ 2.066905] tun: Universal TUN/TAP device driver, 1.6
  1628. [ 2.072621] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1629. [ 2.079931] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
  1630. [ 2.087687] PPP generic driver version 2.4.2
  1631. [ 2.093397] PPP BSD Compression module registered
  1632. [ 2.098676] PPP Deflate Compression module registered
  1633. [ 2.105135] PPP MPPE Compression module registered
  1634. [ 2.110628] NET: Registered protocol family 24
  1635. [ 2.115655] PPTP driver version 0.8.5
  1636. [ 2.121221] usbcore: registered new interface driver rtl8150
  1637. [ 2.127784] usbcore: registered new interface driver asix
  1638. [ 2.134308] usbcore: registered new interface driver qf9700
  1639. [ 2.140825] usbcore: registered new interface driver cdc_ether
  1640. [ 2.147555] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  1641. [ 2.155952] [sw_hci_sun4i_init 1254]
  1642. [ 2.159972] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrictd
  1643. [ 2.169687] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrictd
  1644. [ 2.179376] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrictd
  1645. [ 2.188984] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrictd
  1646. [ 2.198947] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0x0
  1647. [ 2.207714] [sw-ehci1]: open clock
  1648. [ 2.231404] [sw-ehci1]: open clock, 0x60(0x202c143), 0xcc(0x103)
  1649. [ 2.238146] [sw-ehci1]: Set USB Power ON
  1650. [ 2.242558] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  1651. [ 2.250988] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  1652. [ 2.259003] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
  1653. [ 2.265005] [ehci_run 736]
  1654. [ 2.280053] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  1655. [ 2.287037] hub 1-0:1.0: USB hub found
  1656. [ 2.291286] hub 1-0:1.0: 1 port detected
  1657. [ 2.296364] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0x4
  1658. [ 2.305103] [sw-ohci1]: open clock
  1659. [ 2.328792] [sw-ohci1]: open clock, 0x60(0x202c147), 0xcc(0x163)
  1660. [ 2.335597] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c147
  1661. [ 2.342058] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1662. [ 2.350094] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  1663. [ 2.358038] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
  1664. [ 2.410073] ata1: SATA link down (SStatus 0 SControl 300)
  1665. [ 2.424952] hub 2-0:1.0: USB hub found
  1666. [ 2.429180] hub 2-0:1.0: 1 port detected
  1667. [ 2.434315] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0x8
  1668. [ 2.443080] [sw-ehci2]: open clock
  1669. [ 2.466754] [sw-ehci2]: open clock, 0x60(0x202c14f), 0xcc(0x167)
  1670. [ 2.473510] [sw-ehci2]: Set USB Power ON
  1671. [ 2.477913] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  1672. [ 2.486342] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  1673. [ 2.494497] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
  1674. [ 2.500482] [ehci_run 736]
  1675. [ 2.550101] The port change to OHCI now!
  1676. [ 2.570058] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  1677. [ 2.577005] hub 3-0:1.0: USB hub found
  1678. [ 2.581253] hub 3-0:1.0: 1 port detected
  1679. [ 2.586345] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc
  1680. [ 2.595102] [sw-ohci2]: open clock
  1681. [ 2.618779] [sw-ohci2]: open clock, 0x60(0x202c15f), 0xcc(0x1e7)
  1682. [ 2.625540] [sw_ohci_hcd_probe 360]:reg(0xf1c20060) = 202c15f
  1683. [ 2.632038] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1684. [ 2.640141] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  1685. [ 2.648099] sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
  1686. [ 2.714890] hub 4-0:1.0: USB hub found
  1687. [ 2.719109] hub 4-0:1.0: 1 port detected
  1688. [ 2.724344] usbcore: registered new interface driver cdc_acm
  1689. [ 2.730754] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
  1690. [ 2.739732] Initializing USB Mass Storage driver...
  1691. [ 2.745510] usbcore: registered new interface driver usb-storage
  1692. [ 2.752295] USB Mass Storage support registered.
  1693. [ 2.757919] usbcore: registered new interface driver usbserial
  1694. [ 2.764514] usbserial: USB Serial Driver core
  1695. [ 2.769574] USB Serial support registered for GSM modem (1-port)
  1696. [ 2.776772] usbcore: registered new interface driver option
  1697. [ 2.776790] usb 2-1: new low-speed USB device number 2 using sw-ohci
  1698. [ 2.790258] option: v0.7.2:USB Driver for GSM modems
  1699. [ 2.796353] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  1700. [ 2.803854] [sw_udc]: alloc request: ep(0xc075c0f0, ep0, 64), req(0xef366640)
  1701. [ 2.811902] [sw_udc]: sw_udc_pullup, is_on = 0
  1702. [ 2.816894] [sw_udc]: usbd_stop_work
  1703. [ 2.824354] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1704. [ 2.832178] android_usb gadget: Number of LUNs=3
  1705. [ 2.837360] lun0: LUN: removable file: (no medium)
  1706. [ 2.842872] lun1: LUN: removable file: (no medium)
  1707. [ 2.848346] lun2: LUN: removable file: (no medium)
  1708. [ 2.854546] android_usb gadget: android_usb ready
  1709. [ 2.860586] mousedev: PS/2 mouse device common for all mice
  1710. [ 2.867209] input: sw-keyboard as /devices/virtual/input/input0
  1711. [ 2.875013] input: sun7i-ir as /devices/virtual/input/input1
  1712. [ 2.882055] uinput result 0 , vmouse_init
  1713. [ 2.887058] input: vmouse as /devices/virtual/input/input2
  1714. [ 2.894478] =====ctp_fetch_sysconfig_para=====.
  1715. [ 2.899665] ctp_fetch_sysconfig_para: ctp_unused.
  1716. [ 2.905102] ctp_init: ctp_fetch_sysconfig_para err.
  1717. [ 2.911169] sunxi_rtc_init: enter
  1718. [ 2.915233] rtc_hw_init(400): start
  1719. [ 2.919248] rtc_hw_init(431): end
  1720. [ 2.923105] sunxi_rtc_gettime, line 39
  1721. [ 2.927312] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  1722. [ 2.932920] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  1723. [ 2.939856] sunxi_rtc_gettime(67): read time 2000-1-1 0:1:15
  1724. [ 2.946225] sunxi_rtc_getalarm(269): year < 70, so add 100, to check
  1725. [ 2.953416] sunxi_rtc_getalarm(281): get alarm time 2000-1-1 0:0:0
  1726. [ 2.961000] using rtc device, rtc, for alarms
  1727. [ 2.965733] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  1728. [ 2.973032] i2c /dev entries driver
  1729. [ 2.978335] lirc_dev: IR Remote Control driver registered, major 249
  1730. [ 2.985613] IR NEC protocol handler initialized
  1731. [ 2.990734] IR RC5(x) protocol handler initialized
  1732. [ 2.996108] IR RC6 protocol handler initialized
  1733. [ 3.001199] IR JVC protocol handler initialized
  1734. [ 3.006278] IR Sony protocol handler initialized
  1735. [ 3.011555] IR RC5 (streamzap) protocol handler initialized
  1736. [ 3.017805] IR SANYO protocol handler initialized
  1737. [ 3.023140] IR MCE Keyboard/mouse protocol handler initialized
  1738. [ 3.029681] IR LIRC bridge handler initialized
  1739. [ 3.034677] Linux video capture interface: v2.00
  1740. [ 3.040159] kworker/u:0 used greatest stack depth: 6392 bytes left
  1741. [ 3.047107] [hx-cedar dev]: install start!!!
  1742. [ 3.053006] [cedar dev]: install end!!!
  1743. [ 3.057709] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-03
  1744. [ 3.075072] kworker/u:0 used greatest stack depth: 6352 bytes left
  1745. [ 3.085441] pmu_pekoff_time = 6000
  1746. [ 3.089255] pmu_pekoff_en = 1
  1747. [ 3.092598] pmu_peklong_time = 1500
  1748. [ 3.096508] pmu_pekon_time = 1000
  1749. [ 3.100254] pmu_pwrok_time = 64
  1750. [ 3.103775] pmu_pwrnoe_time = 2000
  1751. [ 3.107586] pmu_intotp_en = 1
  1752. [ 3.111544] [AXP]POWER20_OFF_CTL:2070-->0x42
  1753. [ 3.116928] POWER20_PEK_SET:2087-->0x9d
  1754. [ 3.121839] POWER20_PEK_SET:2098-->0x9d
  1755. [ 3.126735] POWER20_PEK_SET:2107-->0x9d
  1756. [ 3.131649] POWER20_PEK_SET:2118-->0x9d
  1757. [ 3.136544] POWER20_PEK_SET:2130-->0x9d
  1758. [ 3.141455] POWER20_HOTOVER_CTL:2139-->0xad
  1759. [ 3.150699] [AXP]last_rest_vol = 0, now_rest_vol = 100
  1760. [ 3.157487] [AXP]charger->rest_vol = 100
  1761. [ 3.165268] create_regulator: axp20_ldo2: Failed to create debugfs directory
  1762. [ 3.173252] regulator_virtual_consumer_probe:get regulator:axp20_analog/fm ok
  1763. [ 3.181627] regulator_virtual_consumer_probe:get regulator:axp20_pll ok
  1764. [ 3.189365] regulator_virtual_consumer_probe:get regulator:axp20_hdmi ok
  1765. [ 3.197218] create_regulator: axp20_buck2: Failed to create debugfs directory
  1766. [ 3.205275] regulator_virtual_consumer_probe:get regulator:axp20_core ok
  1767. [ 3.213283] regulator_virtual_consumer_probe:get regulator:axp20_ddr ok
  1768. [ 3.221068] regulator_virtual_consumer_probe:get regulator:axp20_mic ok
  1769. [ 3.229325] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-m
  1770. [ 3.239199] device-mapper: multipath: version 1.3.0 loaded
  1771. [ 3.245467] device-mapper: multipath round-robin: version 1.0.0 loaded
  1772. [ 3.252826] device-mapper: multipath queue-length: version 0.1.0 loaded
  1773. [ 3.260263] device-mapper: multipath service-time: version 0.2.0 loaded
  1774. [ 3.267943] Bluetooth: HCI UART driver ver 2.2
  1775. [ 3.272957] Bluetooth: HCI H4 protocol initialized
  1776. [ 3.278329] Bluetooth: HCI BCSP protocol initialized
  1777. [ 3.283908] Bluetooth: HCILL protocol initialized
  1778. [ 3.289183] Bluetooth: HCIATH3K protocol initialized
  1779. [ 3.294813] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  1780. [ 3.301012] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
  1781. [ 3.301019]
  1782. [ 3.310009] [gpio-err] __pio_to_irq: invalid pio to irq
  1783. [ 3.316800] [fantasy] err get cpu normal frequency from sysconfig failed
  1784. [ 3.324568] [mmc-msg] sw_mci_init
  1785. [ 3.328315] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  1786. [ 3.337174] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  1787. [ 3.348441] [mmc-msg] sdc0 Probe: base:0xf003e000 irq:64 sg_cpu:ffdde000(4fc.
  1788. [ 3.358220] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 tiB
  1789. [ 3.369459] [mmc-msg] sdc3 Probe: base:0xf0094000 irq:67 sg_cpu:ffddd000(4fc.
  1790. [ 3.378895] sunxi_leds driver init
  1791. [ 3.382751] request gpio187, ret=0
  1792. [ 3.386552] trigger_name:
  1793. [ 3.389485] request gpio188, ret=0
  1794. [ 3.393329] trigger_name:heartbeat
  1795. [ 3.397774] Registered led device: green:ph20:led1
  1796. [ 3.403389] Registered led device: blue:ph21:led2
  1797. [ 3.419495] input: Genius Optical Mouse as /devices/platform/sw-ohci.14
  1798. [ 3.431131] generic-usb 0003:0458:003A.0001: input: USB HID v1.10 Mouse [Gen0
  1799. [ 3.443996] usbcore: registered new interface driver usbhid
  1800. [ 3.450448] usbhid: USB HID core driver
  1801. [ 3.455883] ashmem: initialized
  1802. [ 3.459675] logger: created 256K log 'log_main'
  1803. [ 3.465073] logger: created 256K log 'log_events'
  1804. [ 3.470663] logger: created 256K log 'log_radio'
  1805. [ 3.476075] logger: created 256K log 'log_system'
  1806. [ 3.482789] usbcore: registered new interface driver snd-usb-audio
  1807. [ 3.490615] value is 1
  1808. [ 3.493570] enter sun7i Audio codec!!!
  1809. [ 3.499380] sun7i audio support initialized
  1810. [ 3.504368] sun7i Audio codec successfully loaded..
  1811. [ 3.512675] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
  1812. [ 3.520025] [SPDIF]sun7i-spdif cannot find any using configuration for contr!
  1813. [ 3.531716] [SPDIF]sun7i_sndspdif cannot find any using configuration for co!
  1814. [ 3.542279] [I2S] i2s_select type err!
  1815. [ 3.546467] [I2S]sun7i-i2s cannot find any using configuration for controlle!
  1816. [ 3.557052] [I2S]sndi2s cannot find any using configuration for controllers,!
  1817. [ 3.566665] [I2S] i2s_master type err!
  1818. [ 3.570868] [I2S] audio_format type err!
  1819. [ 3.575246] [I2S] signal_inversion type err!
  1820. [ 3.580014] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  1821. [ 3.590135] func:sun7i_pcm_init(line:953)sun7i-pcm.c
  1822. [ 3.595683] [PCM] type err!
  1823. [ 3.598801] [PCM] i2s_select type err!
  1824. [ 3.603109] func:sun7i_pcm_init(line:964)sun7i-pcm.c,pcm_used:-284983396
  1825. [ 3.610622] get pcm_para gpio list failed
  1826. [ 3.615102] func:sun7i_soc_platform_i2s_init(line:803)sun7i-pcmdma.c
  1827. [ 3.622804] func:sndpcm_codec_init(line:181)sndpcm.c
  1828. [ 3.628361] [PCM] type err!
  1829. [ 3.631534] func:sndpcm_codec_init(line:187)sndpcm.c,pcm_used:0
  1830. [ 3.638153] [PCM]sndi2s cannot find any using configuration for controllers,!
  1831. [ 3.647723] pcm_used type err
  1832. [ 3.651149] [PCM] pcm_master type err!
  1833. [ 3.655335] [PCM] audio_format type err!
  1834. [ 3.659712] [PCM] signal_inversion type err!
  1835. [ 3.664494] func:sun7i_sndpcm_init(line:209)sun7i-sndpcm.c,pcm_used:0
  1836. [ 3.671701] [I2S]sun7i_sndi2s cannot find any using configuration for contro!
  1837. [ 3.681861] ALSA device list:
  1838. [ 3.685179] #0: sun7i-CODEC Audio Codec
  1839. [ 3.689752] #1: sndhdmi
  1840. [ 3.692923] Netfilter messages via NETLINK v0.30.
  1841. [ 3.698272] nf_conntrack version 0.5.0 (13202 buckets, 52808 max)
  1842. [ 3.705693] ctnetlink v0.93: registering with nfnetlink.
  1843. [ 3.711774] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1844. [ 3.719549] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1845. [ 3.727339] xt_time: kernel timezone is -0000
  1846. [ 3.732316] IPv4 over IPv4 tunneling driver
  1847. [ 3.738043] GRE over IPv4 demultiplexor driver
  1848. [ 3.742865] GRE over IPv4 tunneling driver
  1849. [ 3.748872] ip_tables: (C) 2000-2006 Netfilter Core Team
  1850. [ 3.755117] TCP cubic registered
  1851. [ 3.758726] Initializing XFRM netlink socket
  1852. [ 3.763952] NET: Registered protocol family 10
  1853. [ 3.770295] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1854. [ 3.776546] IPv6 over IPv4 tunneling driver
  1855. [ 3.783677] NET: Registered protocol family 17
  1856. [ 3.788696] NET: Registered protocol family 15
  1857. [ 3.793908] Bluetooth: RFCOMM TTY layer initialized
  1858. [ 3.799370] Bluetooth: RFCOMM socket layer initialized
  1859. [ 3.805367] Bluetooth: RFCOMM ver 1.11
  1860. [ 3.809558] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1861. [ 3.815518] Bluetooth: BNEP filters: protocol multicast
  1862. [ 3.821365] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1863. [ 3.828307] L2TP core driver, V2.0
  1864. [ 3.832165] PPPoL2TP kernel driver, V2.0
  1865. [ 3.836549] L2TP IP encapsulation support (L2TPv3)
  1866. [ 3.842236] L2TP netlink interface
  1867. [ 3.846074] L2TP ethernet pseudowire support (L2TPv3)
  1868. [ 3.851753] Registering the dns_resolver key type
  1869. [ 3.857073] VFP support v0.3: implementor 41 architecture 2 part 30 variant 4
  1870. [ 3.865681] ThumbEE CPU extension supported.
  1871. [ 3.870477] [rfkill]: init no bt used in configuration
  1872. [ 3.878043] regulator_init_complete: axp20_buck3: incomplete constraints, len
  1873. [ 3.887065] regulator_init_complete: axp20_buck2: incomplete constraints, len
  1874. [ 3.896068] regulator_init_complete: axp20_ldo4: incomplete constraints, lean
  1875. [ 3.904968] regulator_init_complete: axp20_ldo3: incomplete constraints, lean
  1876. [ 3.913876] regulator_init_complete: axp20_ldo2: incomplete constraints, lean
  1877. [ 3.922785] regulator_init_complete: axp20_ldo1: incomplete constraints, lean
  1878. [ 3.931436] sunxi_rtc_gettime, line 39
  1879. [ 3.935626] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  1880. [ 3.941184] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  1881. [ 3.948088] sunxi_rtc_gettime(67): read time 2000-1-1 0:1:16
  1882. [ 3.954458] sunxi-rtc sunxi-rtc: setting system clock to 2000-01-01 00:01:16)
  1883. [ 3.964411] Waiting for root device /dev/mmcblk0p3...
  1884. [ 4.335010] [mmc-msg] mmc 0 detect change, present 1
  1885. [ 4.840075] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timB
  1886. [ 4.850103] [mmc-msg] sdc0 power on
  1887. [ 4.870059] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1888. [ 4.952382] [mmc-err] smc 0 err, cmd 52, RTO
  1889. [ 4.958077] [mmc-err] smc 0 err, cmd 52, RTO
  1890. [ 4.962955] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1891. [ 4.975872] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1892. [ 4.988532] [mmc-err] smc 0 err, cmd 5, RTO
  1893. [ 4.994124] [mmc-err] smc 0 err, cmd 5, RTO
  1894. [ 4.999709] [mmc-err] smc 0 err, cmd 5, RTO
  1895. [ 5.005306] [mmc-err] smc 0 err, cmd 5, RTO
  1896. [ 5.010727] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1897. [ 5.021268] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1898. [ 5.034177] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1899. [ 5.073227] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width B
  1900. [ 5.083674] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  1901. [ 5.149408] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V widtB
  1902. [ 5.160066] mmc0: new high speed SDHC card at address 0007
  1903. [ 5.166893] mmcblk0: mmc0:0007 SD04G 3.70 GiB
  1904. [ 5.184175] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
  1905. [ 5.292750] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incoms
  1906. [ 5.341821] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incoms
  1907. [ 5.430239] EXT4-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fd
  1908. [ 5.528027] EXT4-fs (mmcblk0p3): recovery complete
  1909. [ 5.533422] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. )
  1910. [ 5.547500] VFS: Mounted root (ext4 filesystem) on device 179:3.
  1911. [ 5.556064] devtmpfs: mounted
  1912. [ 5.559742] Freeing init memory: 196K
  1913. [ 5.563958] Failed to execute /init. Attempting defaults...
  1914. [ 5.572252] Kernel panic - not syncing: No init found. Try passing init= op.
  1915. [ 5.586175] CPU0: stopping
  1916. [ 5.589236] [<c00144c4>] (unwind_backtrace+0x0/0xe0) from [<c0012940>] (hand)
  1917. [ 5.598887] [<c0012940>] (handle_IPI+0xf8/0x1d8) from [<c0008504>] (gic_hand)
  1918. [ 5.608437] [<c0008504>] (gic_handle_irq+0x8c/0x9c) from [<c000d540>] (__irq)
  1919. [ 5.617775] Exception stack(0xc0731f70 to 0xc0731fb8)
  1920. [ 5.623429] 1f60: 00000003 00000001 c0730
  1921. [ 5.632581] 1f80: c0730000 c077ec48 c04fb8b8 c0740b10 4000406a 410fc074 00000
  1922. [ 5.641734] 1fa0: 00000000 c0731fb8 c000ead0 c000ead4 60000013 ffffffff
  1923. [ 5.649141] [<c000d540>] (__irq_svc+0x40/0x70) from [<c000ead4>] (default_id)
  1924. [ 5.658299] [<c000ead4>] (default_idle+0x24/0x28) from [<c000ee3c>] (cpu_idl)
  1925. [ 5.667359] [<c000ee3c>] (cpu_idle+0x88/0xe8) from [<c06fe7a4>] (start_kerne)
  1926. [ 5.676605] [hotplug]: try to kill cpu:0 failed!
  1927. [ 5.681782] Rebooting in 10 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!