Advertisement
Guest User

OPENTEL

a guest
Jul 14th, 2016
476
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.55 KB | None | 0 0
  1. BCM
  2.  
  3. M0 CLZ
  4. Build Date: Jul 8 2013 15:30:50
  5. nand_flash_init: flash size: 134217728 bytes[128 MB]
  6. USB Root Hub
  7. [BLOADER_GetVideoType] TV_TYPE_NTSC
  8. #@
  9.  
  10. BCM97581B0 CFE v3.20, CFE core v3.33, Endian Mode: Little
  11. Build Date: Tue May 21 10:59:59 2013 (shyang@seunghwayang)
  12. Copyright (C) Broadcom Corporation.
  13.  
  14. Enabling NAND flash at CS2.
  15. BCHP_NAND_FLASH_DEVICE_ID =0x1f1001d, BCHP_NAND_FLASH_DEVICE_ID_EXT = 0x1f1001d
  16. CPU speed: 479MHz
  17. DDR Frequency: 800 MHz
  18. DDR Mode: DDR3
  19. Total memory(MEMC 0): 256MB
  20. MEMC 0 DDR Width: 16
  21. Boot Device: SPI
  22. Total flash: 16MB
  23.  
  24. Initializing USB.
  25. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
  26. Saving shmoo values...
  27. Saved shmoo values....
  28.  
  29. CFE initialized.
  30. Starting splash screen.
  31. Found splash image - Width = 720 Height = 480
  32. Non Interlaced Replace list 043e47b0 0c800000Interlaced Replace list 043e4d50 0c8005a0
  33. Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:bmem=172M@84M
  34. Loading: 0x80001000/10795488 0x80a4c9e0/115344 Entry address is 0x804296c0
  35. Starting program at 0x804296c0
  36.  
  37. Linux version 2.6.37-3.1 (root@localhost.localdomain) (gcc version 4.5.3 (Broadcom stbgcc-4.5.3-2.2) ) #21 Fri Jul 10 15:57:01 KST 2015
  38. Fetching vars from bootloader... found 8 vars.
  39. Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
  40. sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
  41. Using 256 MB + 0 MB RAM (from CFE)
  42. bootconsole [early0] enabled
  43. CPU revision is: 00029032 (Broadcom BMIPS3300)
  44. Determined physical RAM map:
  45. memory: 10000000 @ 00000000 (usable)
  46. bmem: adding 172 MB RESERVED region at 84 MB (0x0ac00000@0x05400000)
  47. Initrd not found or empty - disabling initrd
  48. Zone PFN ranges:
  49. Normal 0x00000000 -> 0x00010000
  50. Movable zone start PFN for each node
  51. early_node_map[1] active PFN ranges
  52. 0: 0x00000000 -> 0x00010000
  53. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  54. Kernel command line: bmem=172M@84M
  55. PID hash table entries: 1024 (order: 0, 4096 bytes)
  56. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  57. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  58. Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
  59. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  60. Memory: 73064k/262144k available (4287k kernel code, 189080k reserved, 1041k data, 5212k init, 0k highmem)
  61. NR_IRQS:160
  62. Detected MIPS clock frequency: 501 MHz (250.506 MHz counter)
  63. Console: colour dummy device 80x25
  64. Calibrating delay loop... 499.71 BogoMIPS (lpj=249856)
  65. pid_max: default: 32768 minimum: 301
  66. Mount-cache hash table entries: 512
  67. NET: Registered protocol family 16
  68. USB0: power enable is active low; overcurrent is active low
  69. SDIO_0: enabling controller
  70. bio: create slab <bio-0> at 0
  71. SCSI subsystem initialized
  72. usbcore: registered new interface driver usbfs
  73. usbcore: registered new interface driver hub
  74. usbcore: registered new device driver usb
  75. Switching to clocksource wktmr
  76. NET: Registered protocol family 2
  77. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  78. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  79. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  80. TCP: Hash tables configured (established 8192 bind 8192)
  81. TCP reno registered
  82. UDP hash table entries: 256 (order: 0, 4096 bytes)
  83. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  84. NET: Registered protocol family 1
  85. RPC: Registered udp transport module.
  86. RPC: Registered tcp transport module.
  87. RPC: Registered tcp NFSv4.1 backchannel transport module.
  88. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  89. NTFS driver 2.1.29 [Flags: R/W].
  90. JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  91. fuse init (API version 7.15)
  92. msgmni has been set to 142
  93. alg: No test for stdrng (krng)
  94. io scheduler noop registered
  95. io scheduler cfq registered (default)
  96. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  97. serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62) is a 16550A
  98. console [ttyS0] enabled, bootconsole disabled
  99. console [ttyS0] enabled, bootconsole disabled
  100. serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63) is a 16550A
  101. serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64) is a 16550A
  102. brd: module loaded
  103. loop: module loaded
  104. brcmstb_nand: NAND controller driver is loaded
  105. Config internal EPHY through MDIO
  106. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  107. usbcore: registered new interface driver pegasus
  108. usbcore: registered new interface driver asix
  109. usbcore: registered new interface driver cdc_ether
  110. usbcore: registered new interface driver net1080
  111. usbcore: registered new interface driver cdc_subset
  112. usbcore: registered new interface driver zaurus
  113. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  114. ehci-brcm ehci-brcm.0: Broadcom STB EHCI
  115. ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
  116. ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
  117. ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
  118. hub 1-0:1.0: USB hub found
  119. hub 1-0:1.0: 2 ports detected
  120. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  121. ohci-brcm ohci-brcm.0: Broadcom STB OHCI
  122. ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
  123. ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
  124. hub 2-0:1.0: USB hub found
  125. hub 2-0:1.0: 2 ports detected
  126. Initializing USB Mass Storage driver...
  127. usbcore: registered new interface driver usb-storage
  128. USB Mass Storage support registered.
  129. mice: PS/2 mouse device common for all mice
  130. sdhci: Secure Digital Host Controller Interface driver
  131. sdhci: Copyright(c) Pierre Ossman
  132. mmc0: SDHCI controller on platform [sdhci.0] using ADMA
  133. usbcore: registered new interface driver usbhid
  134. usbhid: USB HID core driver
  135. TCP cubic registered
  136. NET: Registered protocol family 17
  137. EBI CS2: setting up NAND flash (primary)
  138. ONFI flash detected
  139. ONFI param page 0 valid
  140. NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD S34ML01G1)
  141. ONFI flash detected
  142. ONFI param page 0 valid
  143. NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD S34ML01G1)
  144. brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
  145.  
  146. Bad block table found at page 65472, version 0x01
  147. Bad block table found at page 65408, version 0x01
  148. nand_read_bbt: bad block at 0x000003600000
  149. RedBoot partition parsing not available
  150. Creating 8 MTD partitions on "brcmnand.0":
  151. 0x000000000000-0x000000500000 : "database"
  152. 0x000000500000-0x000000600000 : "dummy3"
  153. 0x000000600000-0x000000b00000 : "cas"
  154. 0x000000b00000-0x000001500000 : "usr"
  155. 0x000001500000-0x000002100000 : "main"
  156. 0x000002100000-0x000002900000 : "kernel"
  157. 0x000002900000-0x000002a00000 : "spare0"
  158. 0x000002a00000-0x000008000000 : "misc"
  159. EBI CS0: setting up SPI flash
  160. spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
  161. m25p80 spi0.0: found s25sl032a, expected m25p80
  162. m25p80 spi0.0: s25sl032a (4096 Kbytes)
  163. Creating 13 MTD partitions on "spi0.0":
  164. 0x000000000000-0x000000100000 : "loader"
  165. 0x000000100000-0x000000180000 : "ssbl"
  166. 0x000000180000-0x000000190000 : "dummy0"
  167. 0x000000190000-0x0000001a0000 : "key_info"
  168. 0x0000001a0000-0x0000001b0000 : "macadr"
  169. 0x0000001b0000-0x0000001c0000 : "nvram"
  170. 0x0000001c0000-0x0000001d0000 : "loader_info"
  171. 0x0000001d0000-0x0000001e0000 : "header_info"
  172. 0x0000001e0000-0x0000001f0000 : "ir_cpcb"
  173. 0x0000001f0000-0x000000200000 : "ir_bbcb"
  174. 0x000000200000-0x000000280000 : "splash"
  175. 0x000000280000-0x000000300000 : "dummy1"
  176. 0x000000300000-0x000000400000 : "dummy2"
  177. PM: CP0 COUNT/COMPARE frequency depends on divisor
  178. Freeing unused kernel memory: 5212k freed
  179. Algorithmics/MIPS FPU Emulator v1.5
  180. starting pid 460, tty '': '/etc/init.d/rcS'
  181. Mounting virtual filesystems
  182. Starting mdev
  183. Configuring eth0 interface
  184. eth0 cable plugged in, powering up
  185. Configuring lo interface
  186. Starting network services
  187. Starting user services
  188. UBI: attaching mtd0 to ubi0
  189. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  190. UBI: logical eraseblock size: 126976 bytes
  191. UBI: smallest flash I/O unit: 2048
  192. UBI: VID header offset: 2048 (aligned 2048)
  193. UBI: data offset: 4096
  194. UBI: max. sequence number: 20369
  195. UBI: attached mtd0 to ubi0
  196. UBI: MTD device name: "database"
  197. UBI: MTD device size: 5 MiB
  198. UBI: number of good PEBs: 40
  199. UBI: number of bad PEBs: 0
  200. UBI: number of corrupted PEBs: 0
  201. UBI: max. allowed volumes: 128
  202. UBI: wear-leveling threshold: 4096
  203. UBI: number of internal volumes: 1
  204. UBI: number of user volumes: 1
  205. UBI: available PEBs: 0
  206. UBI: total number of reserved PEBs: 40
  207. UBI: number of PEBs reserved for bad PEB handling: 2
  208. UBI: max/mean erase counter: 585/508
  209. UBI: image sequence number: 441907942
  210. UBI: background thread "ubi_bgt0d" started, PID 492
  211. UBI device number 0, total 40 LEBs (5079040 bytes, 4.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
  212. UBI: attaching mtd3 to ubi1
  213. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  214. UBI: logical eraseblock size: 126976 bytes
  215. UBI: smallest flash I/O unit: 2048
  216. UBI: VID header offset: 2048 (aligned 2048)
  217. UBI: data offset: 4096
  218. UBI: max. sequence number: 16276
  219. UBI: attached mtd3 to ubi1
  220. UBI: MTD device name: "usr"
  221. UBI: MTD device size: 10 MiB
  222. UBI: number of good PEBs: 80
  223. UBI: number of bad PEBs: 0
  224. UBI: number of corrupted PEBs: 0
  225. UBI: max. allowed volumes: 128
  226. UBI: wear-leveling threshold: 4096
  227. UBI: number of internal volumes: 1
  228. UBI: number of user volumes: 1
  229. UBI: available PEBs: 0
  230. UBI: total number of reserved PEBs: 80
  231. UBI: number of PEBs reserved for bad PEB handling: 2
  232. UBI: max/mean erase counter: 387/202
  233. UBI: image sequence number: 1694569417
  234. UBI: background thread "ubi_bgt1d" started, PID 514
  235. UBI device number 1, total 80 LEBs (10158080 bytes, 9.7 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
  236. UBIFS: recovery needed
  237. UBIFS: recovery completed
  238. UBIFS: mounted UBI device 1, volume 0, name "usr"
  239. UBIFS: file system size: 8253440 bytes (8060 KiB, 7 MiB, 65 LEBs)
  240. UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
  241. UBIFS: media format: w4/r0 (latest is w4/r0)
  242. UBIFS: default compressor: lzo
  243. UBIFS: reserved for root: 389830 bytes (380 KiB)
  244. UBI: attaching mtd2 to ubi2
  245. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  246. UBI: logical eraseblock size: 126976 bytes
  247. UBI: smallest flash I/O unit: 2048
  248. UBI: VID header offset: 2048 (aligned 2048)
  249. UBI: data offset: 4096
  250. UBI: max. sequence number: 19507
  251. UBI: attached mtd2 to ubi2
  252. UBI: MTD device name: "cas"
  253. UBI: MTD device size: 5 MiB
  254. UBI: number of good PEBs: 40
  255. UBI: number of bad PEBs: 0
  256. UBI: number of corrupted PEBs: 0
  257. UBI: max. allowed volumes: 128
  258. UBI: wear-leveling threshold: 4096
  259. UBI: number of internal volumes: 1
  260. UBI: number of user volumes: 1
  261. UBI: available PEBs: 0
  262. UBI: total number of reserved PEBs: 40
  263. UBI: number of PEBs reserved for bad PEB handling: 2
  264. UBI: max/mean erase counter: 542/487
  265. UBI: image sequence number: 884087698
  266. UBI: background thread "ubi_bgt2d" started, PID 542
  267. UBI device number 2, total 40 LEBs (5079040 bytes, 4.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
  268. UBIFS: recovery needed
  269. UBIFS: recovery completed
  270. UBIFS: mounted UBI device 2, volume 0, name "cas"
  271. UBIFS: file system size: 3174400 bytes (3100 KiB, 3 MiB, 25 LEBs)
  272. UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
  273. UBIFS: media format: w4/r0 (latest is w4/r0)
  274. UBIFS: default compressor: lzo
  275. UBIFS: reserved for root: 149934 bytes (146 KiB)
  276. UBI: attaching mtd7 to ubi3
  277. UBI: physical eraseblock size: 131072 bytes (128 KiB)
  278. UBI: logical eraseblock size: 126976 bytes
  279. UBI: smallest flash I/O unit: 2048
  280. UBI: VID header offset: 2048 (aligned 2048)
  281. UBI: data offset: 4096
  282. UBI: max. sequence number: 16163
  283. UBI: attached mtd7 to ubi3
  284. UBI: MTD device name: "misc"
  285. UBI: MTD device size: 86 MiB
  286. UBI: number of good PEBs: 683
  287. UBI: number of bad PEBs: 5
  288. UBI: number of corrupted PEBs: 0
  289. UBI: max. allowed volumes: 128
  290. UBI: wear-leveling threshold: 4096
  291. UBI: number of internal volumes: 1
  292. UBI: number of user volumes: 1
  293. UBI: available PEBs: 0
  294. UBI: total number of reserved PEBs: 683
  295. UBI: number of PEBs reserved for bad PEB handling: 6
  296. UBI: max/mean erase counter: 25/23
  297. UBI: image sequence number: 1932456042
  298. UBI: background thread "ubi_bgt3d" started, PID 570
  299. eth0 cable unplugged, powering down
  300. UBI device number 3, total 683 LEBs (86724608 bytes, 82.7 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
  301. UBIFS: recovery needed
  302. UBIFS: recovery completed
  303. UBIFS: mounted UBI device 3, volume 0, name "misc"
  304. UBIFS: file system size: 84185088 bytes (82212 KiB, 80 MiB, 663 LEBs)
  305. UBIFS: journal size: 4190208 bytes (4092 KiB, 3 MiB, 33 LEBs)
  306. UBIFS: media format: w4/r0 (latest is w4/r0)
  307. UBIFS: default compressor: lzo
  308. UBIFS: reserved for root: 3976269 bytes (3883 KiB)
  309. no syslogd found; none killed
  310. udhcpc (v1.18.5) started
  311. ECC failed: 0
  312. ECC corrected: 0
  313. Number of bad blocks: 0
  314. Number of bbt blocks: 0
  315. Block size 131072, page size 2048, OOB size 64
  316. Dumping data starting at 0x00000000 and ending at 0x00c00000...
  317. eth0 cable plugged in, powering up
  318. Sending discover...
  319. eth0 cable unplugged, powering down
  320. Sending discover...
  321. Sending discover...
  322. lib info file check..
  323. user_local.tar.gz is same
  324. starting pid 625, tty '': '/bin/cttyhack /bin/sh -l'
  325. # bcmdriver: module license 'Proprietary' taints kernel.
  326. Disabling lock debugging due to kernel taint
  327. BCMDRV: Initializing bcmdriver version $ 44 $
  328. BCMDRV: Total intc words=3,Total Irqs=97
  329. BCMDRV: Initialization complete
  330. *** 00:00:00.006 nexus_platform_97552: Picture heap 56492032 (xvd 26214400, vdc 28615680)
  331. *** 00:00:00.006 nexus_platform: Release 97552 12.4
  332. *** 00:00:00.015 BCHP_PWR: BCHP_PWR power management disabled
  333. *** 00:00:00.045 int: using BINT with 0 external interrupts, 20 standard interrupts and 24 interrups with a 'weak' mask
  334. *** 00:00:00.071 nexus_transport_module: DPCR Thread: started
  335. *** 00:00:00.094 nexus_video_decoder: FW download not used
  336. *** 00:00:00.175 BXVD: BXVD_Open() - Hardware revision: K, Firmware revision: 160502
  337. *** 00:00:00.199 nexus_platform_config: softI2c = false
  338. *** 00:00:00.201 BRFM: BRFM_Open: OTP disabled
  339. *** 00:00:00.211 nexus_platform: initialized
  340. ###########################################
  341. ### START MAIN PROCEDURE ################
  342. ###########################################
  343. [Drv_GPIO_Open] OK!!!
  344. [Drv_Vfs_Mount] volumeName(ubi0:flash_conf), mountName(/mnt/flash), fs_type(0xfe)
  345. No lease, failing
  346. UBIFS: recovery needed
  347. UBIFS: recovery completed
  348. UBIFS: mounted UBI device 0, volume 0, name "flash_conf"
  349. UBIFS: file system size: 3174400 bytes (3100 KiB, 3 MiB, 25 LEBs)
  350. UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
  351. UBIFS: media format: w4/r0 (latest is w4/r0)
  352. UBIFS: default compressor: lzo
  353. UBIFS: reserved for root: 149934 bytes (146 KiB)
  354.  
  355.  
  356.  
  357. [Drv_Vfs_Mount] fs_type(254) SUCCESS !!!!!
  358.  
  359.  
  360. [Drv_Flash_Read] fseek error
  361. [App_DB_Init] =================> Tuner_connection=0
  362. [App_Network_Init] end
  363. [App_Video_GetHDFormat] tv_type(3), hd_format(0) -> vid_format(7)
  364. [App_Video_GetSDFormat] tv_type(3) -> vid_format(1)
  365. [Drv_Network_DHCP_Pid] dhcpcd pid = [481]
  366. ################################################################
  367. eth0 / dhcp : 1 / manual 0
  368. ################################################################
  369. [Drv_Flash_ValidCheckRead], filename(/dev/mtdblock15)
  370. [Drv_HDMI_ConvertHdcpKeyData] ksvSize(5) encKeySize(1120)
  371. [Drv_HDMI_InitHdcp] Start !!!!
  372. ========================================
  373. hdcp_result(3)
  374. hdcpState(1)
  375. hdcpError(0)
  376. linkReadyForEncryption(0)
  377. transmittingEncrypted(0)
  378. ksv key = 0x0 0x0 0x0 0x0 0x0
  379. [HDMI_HDCP_STATE_CHANGED]
  380. ========================================
  381.  
  382. [InternalFrontend_Open] tuner mode is QamModes no 0 is 1
  383. [InternalFrontend_Open] tuner mode is QamModes no 1 is 1
  384. [InternalFrontend_Open] tuner mode is QamModes no 2 is 1
  385. [InternalFrontend_Open] tuner mode is QamModes no 3 is 1
  386. [InternalFrontend_Open] tuner mode is QamModes no 4 is 1
  387. [InternalFrontend_Open] tuner mode is QamModes no 5 is 0
  388. [InternalFrontend_Open] tuner mode is QamModes no 6 is 0
  389. [InternalFrontend_Open] tuner mode is QamModes no 7 is 0
  390. [InternalFrontend_Open] tuner mode is QamModes no 8 is 0
  391. [InternalFrontend_Open] tuner mode is QamModes no 9 is 0
  392. [fnCas_Init] In
  393. *** 00:00:02.046 BCHP_AVS: AVS support enabled!
  394. Decoder_TextMSG_Store_t=2684
  395. Decoder_AttrMSG_Store_t=4164
  396. Thread OPEN
  397. [IUC_Device_Init][722] UniversalClient_StartCaClient result[0]
  398. [Drv_SmartCard_Init] In
  399. [Drv_SmartCard_Init] Out
  400. [Drv_SmartCard_Open] In (0)
  401. CCSK:
  402. CCSK: -----------------------------------------------------
  403. CCSK: 0000: BF F5 5A DA 9A 22 8D 0A D5 59 E2 40 0B 5A 69 06 ..Z.."...Y.@.Zi.
  404. CCSK: -----------------------------------------------------
  405. CCSK:
  406. ### 00:00:02.973 BSCD: ScardDeviceTimerEvent: SC_CARD_REMOVED error
  407.  
  408. !!!Error errCode(0xc000d) at /opt/davinci/chip/broadcom/BCM97552/phase6.0/nexus/../magnum/portinginterface/scd/src/core40nm/bscd.c:2014
  409. !!!Error NEXUS_UNKNOWN(0x9) at /opt/davinci/chip/broadcom/BCM97552/phase6.0/nexus/modules/smartcard/src/nexus_smartcard.c:708
  410. [fnCas_SmartcardCallback] In slot(0) smartcardEvent(1)
  411. [fnCas_SmartcardCallback] Out
  412. [Drv_SmartCard_Open] Out
  413. [fnCas_Init] Out
  414. [UI_Grp_CalBmpAddr] bitmap ROM usage = 304588 (297k) byte
  415. [UI_Grp_CalBmpAddr] bitmap RAM usage = 2363840 (2308k) byte
  416. [UI_Main_PowerOn] init(1)
  417. [App_Demux_CmdProc] receive cmd(11)
  418. [App_Demux_CmdProc] receive cmd(13)
  419. [Drv_Video_Adjust] type(2) level(50) setValue(0)
  420. [Drv_Video_Adjust] type(2) level(50) setValue(0)
  421. [Drv_Video_Adjust] type(0) level(50) setValue(0)
  422. [Drv_Video_Adjust] type(0) level(50) setValue(0)
  423. [Drv_Video_Adjust] type(1) level(50) setValue(0)
  424. [Drv_Video_Adjust] type(1) level(50) setValue(0)
  425. CHANGE MENU 0 -> 0
  426. [UI_Main_PowerOn] end
  427.  
  428.  
  429. Software Version(23592.95), Loader Version(1.05)
  430.  
  431. CHANGE MENU 0 -> 0
  432. CHANGE MENU 0 -> 43
  433. CHANGE MENU 43 -> 53
  434. [UI_MenuUpdateHomeTp_StartFavTpScan] ENTER
  435. [App_DB_GetUNEFavTpIndex] option=0, index=0, max=12
  436. [InternalFrontend_SetFrequency] ===============================================================================
  437. [InternalFrontend_SetFrequency] F:93000, S:5217, qam 5, T No 0
  438. [InternalFrontend_SetFrequency] ===============================================================================
  439. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  440. *** 00:00:03.806 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 0
  441.  
  442. # [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  443. [App_DB_GetUNEFavTpIndex] option=1, index=1, max=12
  444. [InternalFrontend_SetFrequency] ===============================================================================
  445. [InternalFrontend_SetFrequency] F:99000, S:5217, qam 5, T No 0
  446. [InternalFrontend_SetFrequency] ===============================================================================
  447. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  448. *** 00:00:31.999 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  449. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  450. [App_DB_GetUNEFavTpIndex] option=1, index=2, max=12
  451. [InternalFrontend_SetFrequency] ===============================================================================
  452. [InternalFrontend_SetFrequency] F:429000, S:5217, qam 5, T No 0
  453. [InternalFrontend_SetFrequency] ===============================================================================
  454. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  455. *** 00:00:35.691 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  456. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  457. [App_DB_GetUNEFavTpIndex] option=1, index=3, max=12
  458. [InternalFrontend_SetFrequency] ===============================================================================
  459. [InternalFrontend_SetFrequency] F:591000, S:5217, qam 5, T No 0
  460. [InternalFrontend_SetFrequency] ===============================================================================
  461. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  462. *** 00:00:38.904 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  463. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  464. [App_DB_GetUNEFavTpIndex] option=1, index=4, max=12
  465. [InternalFrontend_SetFrequency] ===============================================================================
  466. [InternalFrontend_SetFrequency] F:615000, S:5217, qam 5, T No 0
  467. [InternalFrontend_SetFrequency] ===============================================================================
  468. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  469. *** 00:00:43.535 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  470. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  471. [App_DB_GetUNEFavTpIndex] option=1, index=5, max=12
  472. [InternalFrontend_SetFrequency] ===============================================================================
  473. [InternalFrontend_SetFrequency] F:543000, S:5217, qam 5, T No 0
  474. [InternalFrontend_SetFrequency] ===============================================================================
  475. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  476. *** 00:00:45.589 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  477. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  478. [App_DB_GetUNEFavTpIndex] option=1, index=6, max=12
  479. [InternalFrontend_SetFrequency] ===============================================================================
  480. [InternalFrontend_SetFrequency] F:651000, S:5217, qam 5, T No 0
  481. [InternalFrontend_SetFrequency] ===============================================================================
  482. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  483. *** 00:00:47.986 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  484. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  485. [App_DB_GetUNEFavTpIndex] option=1, index=7, max=12
  486. [InternalFrontend_SetFrequency] ===============================================================================
  487. [InternalFrontend_SetFrequency] F:501000, S:5217, qam 5, T No 0
  488. [InternalFrontend_SetFrequency] ===============================================================================
  489. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  490. *** 00:00:51.062 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  491. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  492. [App_DB_GetUNEFavTpIndex] option=1, index=8, max=12
  493. [InternalFrontend_SetFrequency] ===============================================================================
  494. [InternalFrontend_SetFrequency] F:693000, S:5217, qam 5, T No 0
  495. [InternalFrontend_SetFrequency] ===============================================================================
  496. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  497. *** 00:00:53.858 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  498. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  499. [App_DB_GetUNEFavTpIndex] option=1, index=9, max=12
  500. [InternalFrontend_SetFrequency] ===============================================================================
  501. [InternalFrontend_SetFrequency] F:747000, S:5217, qam 5, T No 0
  502. [InternalFrontend_SetFrequency] ===============================================================================
  503. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  504. *** 00:00:56.083 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  505. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  506. [App_DB_GetUNEFavTpIndex] option=1, index=10, max=12
  507. [InternalFrontend_SetFrequency] ===============================================================================
  508. [InternalFrontend_SetFrequency] F:777000, S:5217, qam 5, T No 0
  509. [InternalFrontend_SetFrequency] ===============================================================================
  510. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  511. *** 00:00:58.145 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  512. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  513. [App_DB_GetUNEFavTpIndex] option=1, index=11, max=12
  514. [InternalFrontend_SetFrequency] ===============================================================================
  515. [InternalFrontend_SetFrequency] F:819000, S:5217, qam 5, T No 0
  516. [InternalFrontend_SetFrequency] ===============================================================================
  517. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  518. *** 00:01:00.171 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  519. [UI_MenuUpdateHomeTp_EndFavTpScan] ENTER failReason=1
  520. [App_DB_GetUNEFavTpIndex] option=1, index=12, max=12
  521. CHANGE MENU 53 -> 0
  522. CHANGE MENU 0 -> 43
  523. CHANGE MENU 43 -> 58
  524. [UI_Win_HidePopupBox] Popup Type None
  525. [UI_Logo_CheckVersionUpdated] VERSION Bat=0xffffffff SavedVer=0x1
  526. [UI_MenuUpdateChanLogo_StartLogoUpdate] =========> SEND MSG_UI_LOGO_INSTALL
  527. [UI_Logo_HandleTask] ==== RECEIVE =====> MSG_UI_LOGO_INSTALL(0)
  528. [UI_Logo_DataProc] ENTER PARAM=0
  529. [UI_Logo_ParseModuleData] ** EXIT chCount=230
  530. [UI_Logo_CheckChannelName] CHAN 159 MATCH-----EXIT
  531. [UI_Logo_DecodeToBmp] END CLockDiff=920
  532. [UI_Logo_DataProc] =========> SEND MSG_UI_LOGO_COMPLETE
  533. [UI_MenuUpdateChanLogo_CmdProc] ==== RECEIVE =====> MSG_UI_LOGO_COMPLETE
  534. CHANGE MENU 58 -> 0
  535. [UI_Win_HidePopupBox] Popup Type None
  536. [fnChan_Start] mCURCHANTYPE(0), mCURCHANMODE(5), mCURGRP(0), chanIdx(142)
  537. [UI_Draw_NormalInfoBannerEpg] epg is empty!
  538. [App_Demux_CmdProc] receive cmd(1)
  539. [DMX_TASK] DMXCMD_START_TUNNING(0) !!!!!!!!!!!!!!
  540. [App_Demux_StopAV] In
  541. [App_Demux_StopAV] channel(0) !!!!!!!!!!!!!!!!
  542. [App_Demux_StopAV] Out
  543. [InternalFrontend_SetFrequency] ===============================================================================
  544. [InternalFrontend_SetFrequency] F:597000, S:5217, qam 5, T No 0
  545. [InternalFrontend_SetFrequency] ===============================================================================
  546. [UI_Draw_NormalInfoBannerEpg] epg is empty!
  547. [App_Chan_CheckAudioMode] ret=0
  548. [App_ClosedCaption_Pause] pause = 0
  549. [App_Text_Start] textMode(0x40)
  550. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  551. *** 00:01:04.466 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  552. [App_Demux_CmdProc] receive cmd(2)
  553. [App_Demux_StartAV] In
  554. [App_Demux_StartAV] ts_id(0x1f9), on_id(0x32), prog_num(0x13ba), vid_pid(0x12d), aud_pid(0x191), pcr_pid(0x12d)
  555. *** 00:01:04.554 nexus_astm: Clock coupling: Input clock
  556. *** 00:01:04.555 nexus_astm: Stc source: PCR
  557. *** 00:01:04.556 nexus_astm: Presentation rate control: Time stamp
  558. *** 00:01:04.557 nexus_astm: STC channel tsm mode: STC master
  559. *** 00:01:04.572 BXDM_PPV2: Display Manager:[00.xxx] [v03.00.0000]
  560. [Drv_Audio_SetSoundTrack] ### set_audio_mode[2] ###
  561. [App_SI_UpdateStart] ENTER
  562. [App_Demux_StartAV] channel(0) !!!!!!!!!!!!!!!!
  563. [App_Demux_StartAV] Out
  564. [InternalFrontend_SetFrequency] ===============================================================================
  565. [InternalFrontend_SetFrequency] F:597000, S:5217, qam 5, T No 0
  566. [InternalFrontend_SetFrequency] ===============================================================================
  567. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  568. *** 00:01:08.096 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
  569.  
  570. # [InternalFrontend_SetFrequency] ===============================================================================
  571. [InternalFrontend_SetFrequency] F:597000, S:5217, qam 5, T No 0
  572. [InternalFrontend_SetFrequency] ===============================================================================
  573. [InternalFrontend_SetFrequency] Annex - 0, bandwidth = 6000000
  574. *** 00:01:13.791 nexus_frontend_7552: QAM: pDevice->isTunerPowered = 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement