API tools faq
paste
Guest User

Dmesg

a guest
Mar 1st, 2014
18
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.15 KB | None | 0 0
raw download clone embed print report
  1. 050000
  2.  
  3. <6>[ 15.816572] c0 5 qcserial 1-1:1.0: device disconnected
  4.  
  5. <6>[ 15.817549] c0 5 msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  6.  
  7. <6>[ 15.817640] c0 5 ehci_hsic_msm_remove[2412] pm_qos_remove_request pm_qos_req_dma_htc
  8.  
  9. <6>[ 15.817671] c0 5 msm_hsic_host msm_hsic_host: ehci_hsic_msm_remove[2423] usage_count is [0] msm_hsic_host_dev:0x (null) &pdev->dev:0xc0d67988 mdm_is_in_restart:0
  10.  
  11. <6>[ 15.817823] c0 5 [MDM] mdm_peripheral_disconnect-
  12.  
  13. <6>[ 15.817823] c0 5 [MDM] mdm_peripheral_connect+
  14.  
  15. <6>[ 15.830703] c0 5 msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  16.  
  17. <6>[ 15.830764] c0 5 msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  18.  
  19. <6>[ 15.852983] c0 5 msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  20.  
  21. <6>[ 15.872943] c1 5 msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  22.  
  23. <6>[ 15.873065] c1 5 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  24.  
  25. <6>[ 15.873096] c1 5 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  26.  
  27. <6>[ 15.873096] c1 5 usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  28.  
  29. <6>[ 15.873096] c1 5 usb usb1: Manufacturer: Linux 3.4.10-g038918d ehci_hcd
  30.  
  31. <6>[ 15.873126] c1 5 usb usb1: SerialNumber: msm_hsic_host
  32.  
  33. <6>[ 15.873370] c1 5 usb usb1: adding 1-0:1.0 (config #1, interface 0)
  34.  
  35. <6>[ 15.873615] c1 5 hub 1-0:1.0: USB hub found
  36.  
  37. <6>[ 15.873645] c1 5 hub 1-0:1.0: 1 port detected
  38.  
  39. <6>[ 15.873706] c1 5 hub 1-0:1.0: usb_probe_interface[297] needs_remote_wakeup:1
  40.  
  41. <6>[ 15.873950] c1 5 usb usb1: udev(usb1)->enable_pm_debug=[0]
  42.  
  43. <6>[ 15.874072] c1 5 ehci_hsic_msm_probe[2265] pm_qos_add_request pm_qos_req_dma_htc
  44.  
  45. <6>[ 15.874408] c1 5 ehci_hsic_msm_probe(2333): mdm_hsic_usb_hcd:0xdd48b000
  46.  
  47. <6>[ 15.874439] c1 5 [MDM] mdm_peripheral_connect-
  48.  
  49. <7>[ 15.874439] c1 5 [MDM][COMM] mdm_status_fn: status:1
  50.  
  51. <6>[ 15.874469] c1 5 [MDM][COMM] mdm_status_fn: status = 1: mdm is now ready
  52.  
  53. <3>[ 15.953792] c0 253 hsicctl hsicctl0: rmnet_ctl_open: Connection timedout opening hsicctl0
  54.  
  55. <6>[ 15.972958] c0 28 hub 1-0:1.0: !connect_change && !wakeup_change
  56.  
  57. <6>[ 16.014039] c0 281 ion_client_create: create ion_client (hcheck) at de60bf00
  58.  
  59. <4>[ 16.036014] c0 281 QSEECOM: qseecom_load_app: App (hcheck) does not exist, loading apps for first time
  60.  
  61. <4>[ 16.039035] c0 281 QSEECOM: qseecom_load_app: App with id 2 (hcheck) now loaded
  62.  
  63. <6>[ 16.039218] c0 281 ion_client_destroy: destroy ion_client de60bf00 (hcheck)
  64.  
  65. <6>[ 16.039310] c0 281 ion_client_create: create ion_client (hcheck) at de60bf00
  66.  
  67. <3>[ 16.039401] c0 281 ion_validate_buffer_flags: buffer was already mapped with flags 1, cannot map with flags 0
  68.  
  69. <6>[ 16.102914] c3 252 [MDM][COMM] mdm_hsic_reconnectd_check_fn: return 1
  70.  
  71. <6>[ 16.102914] c3 252 [MDM][COMM] mdm_modem_ioctl: ret_mdm_hsic_reconnectd == 1
  72.  
  73. <5>[ 16.234732] c2 961 type=1400 audit(1393630495.903:12): avc: denied { setattr } for pid=961 comm="Thread-6" name="audio" dev="mmcblk0p34" ino=36 scontext=u:r:zygote:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir
  74.  
  75. <3>[ 16.453990] c0 253 hsicctl hsicctl0: rmnet_ctl_open: Connection timedout opening hsicctl0
  76.  
  77. <6>[ 16.552937] c0 28 hub_port_wait_reset: portstatus = 0x00000503 portchange = 0x00000000
  78.  
  79. <3>[ 16.612971] c0 28 usb 1-1: hub_port_init[2570] hub_port_reset retval:0
  80.  
  81. <6>[ 16.612971] c0 28 usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  82.  
  83. <3>[ 16.623317] c0 28 usb 1-1: hub_port_init[2694] hub_set_address devnum:2 retval:0
  84.  
  85. <3>[ 16.650999] c0 28 usb 1-1: hub_port_init[2721] usb_get_device_descriptor retval:8
  86.  
  87. <6>[ 16.715092] c0 28 usb 1-1: New USB device found, idVendor=05c6, idProduct=9048
  88.  
  89. <6>[ 16.715092] c0 28 usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
  90.  
  91. <6>[ 16.715092] c0 28 usb 1-1: Product: Qualcomm CDMA Technologies MSM
  92.  
  93. <6>[ 16.715122] c0 28 usb 1-1: Manufacturer: Qualcomm, Incorporated
  94.  
  95. <6>[ 16.730932] c0 28 usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  96.  
  97. <7>[ 16.731359] c0 28 [HSIC][SYSMON] id:1
  98.  
  99. <6>[ 16.731756] c0 28 diag_bridge 1-1:1.0: usb_probe_interface[297] needs_remote_wakeup:0
  100.  
  101. <6>[ 16.731848] c0 28 usb 1-1: adding 1-1:1.1 (config #1, interface 1)
  102.  
  103. <7>[ 16.732000] c0 28 [HSIC][SYSMON] id:1
  104.  
  105. <6>[ 16.732092] c0 28 [SYSMON] sysmon_probe() name=sys_mon
  106.  
  107. <7>[ 16.732122] c0 28 [HSIC][SYSMON] complete
  108.  
  109. <6>[ 16.732153] c0 28 hsic_sysmon 1-1:1.1: usb_probe_interface[297] needs_remote_wakeup:0
  110.  
  111. <6>[ 16.732244] c0 28 usb 1-1: adding 1-1:1.2 (config #1, interface 2)
  112.  
  113. <7>[ 16.732519] c0 28 [HSIC][SYSMON] id:1
  114.  
  115. <6>[ 16.732611] c0 28 qcserial 1-1:1.2: Qualcomm USB modem converter detected
  116.  
  117. <6>[ 16.732641] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d0 get de7f4000
  118.  
  119. <6>[ 16.732641] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d0 get de7f8000
  120.  
  121. <6>[ 16.732641] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d0 get de7fc000
  122.  
  123. <6>[ 16.732672] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d0 get de000000
  124.  
  125. <6>[ 16.732672] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d0 get de004000
  126.  
  127. <6>[ 16.732672] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d8 get de010000
  128.  
  129. <6>[ 16.732702] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d8 get de020000
  130.  
  131. <6>[ 16.732702] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d8 get de030000
  132.  
  133. <6>[ 16.732702] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d8 get de040000
  134.  
  135. <6>[ 16.732702] c0 28 [WWAN_POOL] htc_get_wwan_buffer(90): list c0f4f9d8 get de050000
  136.  
  137. <6>[ 16.733190] c0 28 usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
  138.  
  139. <6>[ 16.733221] c0 28 qcserial 1-1:1.2: usb_probe_interface[297] needs_remote_wakeup:1
  140.  
  141. <6>[ 16.733312] c0 28 usb 1-1: adding 1-1:1.3 (config #1, interface 3)
  142.  
  143. <7>[ 16.733435] c0 28 [HSIC][SYSMON] id:1
  144.  
  145. <6>[ 16.733557] c0 28 bridge_probe: iface number is 3
  146.  
  147. <6>[ 16.733984] c0 28 mdm_bridge 1-1:1.3: usb_probe_interface[297] needs_remote_wakeup:0
  148.  
  149. <6>[ 16.734137] c0 28 usb 1-1: adding 1-1:1.4 (config #1, interface 4)
  150.  
  151. <7>[ 16.734289] c0 28 [HSIC][SYSMON] id:1
  152.  
  153. <6>[ 16.734411] c0 28 bridge_probe: iface number is 4
  154.  
  155. <6>[ 16.734839] c0 28 mdm_bridge 1-1:1.4: usb_probe_interface[297] needs_remote_wakeup:0
  156.  
  157. <6>[ 16.734991] c0 28 usb 1-1: adding 1-1:1.5 (config #1, interface 5)
  158.  
  159. <7>[ 16.735357] c0 28 [HSIC][SYSMON] id:1
  160.  
  161. <7>[ 16.735968] c0 28 [NET][CORE][RULE] attach_rules
  162.  
  163. <7>[ 16.735968] c0 28 [NET][CORE][RULE] attach_rules
  164.  
  165. <6>[ 16.736242] c0 28 rmnet_usb 1-1:1.5: rmnet_usb0: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 82:b8:0a:c4:df:02
  166.  
  167. <6>[ 16.736273] c0 28 net_device:rmnet_usb0 set accept_ra_defrtr:0
  168.  
  169. <6>[ 16.738928] c0 28 rmnet_usb 1-1:1.5: rmnet_usb_ctrl_probe[1348]:rmnet_usb_ctrl_start_rx dev->resp_available:0
  170.  
  171. <6>[ 16.738989] c0 28 rmnet_usb 1-1:1.5: usb_probe_interface[297] needs_remote_wakeup:0
  172.  
  173. <6>[ 16.739142] c0 28 usb 1-1: adding 1-1:1.6 (config #1, interface 6)
  174.  
  175. <7>[ 16.739294] c0 28 [HSIC][SYSMON] id:1
  176.  
  177. <7>[ 16.739661] c0 28 [NET][CORE][RULE] attach_rules
  178.  
  179. <7>[ 16.739661] c0 28 [NET][CORE][RULE] attach_rules
  180.  
  181. <6>[ 16.739844] c0 28 rmnet_usb 1-1:1.6: rmnet_usb1: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 82:b8:0a:c4:df:02
  182.  
  183. <6>[ 16.739874] c0 28 net_device:rmnet_usb1 set accept_ra_defrtr:0
  184.  
  185. <6>[ 16.746986] c0 28 rmnet_usb 1-1:1.6: rmnet_usb_ctrl_probe[1348]:rmnet_usb_ctrl_start_rx dev->resp_available:0
  186.  
  187. <6>[ 16.902945] c0 28 rmnet_usb 1-1:1.6: usb_probe_interface[297] needs_remote_wakeup:0
  188.  
  189. <6>[ 16.903128] c0 28 usb 1-1: adding 1-1:1.7 (config #1, interface 7)
  190.  
  191. <7>[ 16.903311] c0 28 [HSIC][SYSMON] id:1
  192.  
  193. <7>[ 16.903769] c0 28 [NET][CORE][RULE] attach_rules
  194.  
  195. <7>[ 16.903769] c0 28 [NET][CORE][RULE] attach_rules
  196.  
  197. <6>[ 16.904013] c0 28 rmnet_usb 1-1:1.7: rmnet_usb2: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 82:b8:0a:c4:df:02
  198.  
  199. <6>[ 16.904043] c0 28 net_device:rmnet_usb2 set accept_ra_defrtr:0
  200.  
  201. <6>[ 16.907126] c0 28 rmnet_usb 1-1:1.7: rmnet_usb_ctrl_probe[1348]:rmnet_usb_ctrl_start_rx dev->resp_available:0
  202.  
  203. <6>[ 16.959896] c0 253 rmnet_usb 1-1:1.5: rmnet_ctl_open[764]:mdm_wait_timeout:0 resp_available:0
  204.  
  205. <3>[ 16.959926] c0 253 hsicctl hsicctl0: rmnet_ctl_open: Connection timedout opening hsicctl0
  206.  
  207. <6>[ 17.022951] c0 28 rmnet_usb 1-1:1.7: usb_probe_interface[297] needs_remote_wakeup:0
  208.  
  209. <6>[ 17.023134] c0 28 usb 1-1: adding 1-1:1.8 (config #1, interface 8)
  210.  
  211. <7>[ 17.023348] c0 28 [HSIC][SYSMON] id:1
  212.  
  213. <7>[ 17.023866] c0 28 [NET][CORE][RULE] attach_rules
  214.  
  215. <7>[ 17.023866] c0 28 [NET][CORE][RULE] attach_rules
  216.  
  217. <6>[ 17.024111] c0 28 rmnet_usb 1-1:1.8: rmnet_usb3: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 82:b8:0a:c4:df:02
  218.  
  219. <6>[ 17.024111] c0 28 net_device:rmnet_usb3 set accept_ra_defrtr:0
  220.  
  221. <6>[ 17.027071] c0 28 rmnet_usb 1-1:1.8: rmnet_usb_ctrl_probe[1348]:rmnet_usb_ctrl_start_rx dev->resp_available:0
  222.  
  223. <7>[ 17.103280] c3 252 [MDM][COMM] mdm_modem_ioctl: Entering ioctl cmd = 7
  224.  
  225. <7>[ 17.103311] c3 252 [MDM][COMM] mdm_modem_ioctl: wait for mdm to need images reloaded
  226.  
  227. <6>[ 17.103311] c3 252 [MDM][COMM] dump_gpio: MDM2AP_STATUS = 1
  228.  
  229. <6>[ 17.103341] c3 252 [MDM][COMM] dump_gpio: MDM2AP_ERRFATAL = 0
  230.  
  231. <6>[ 17.131390] c2 991 usb_wwan_open
  232.  
  233. <6>[ 17.142957] c0 28 rmnet_usb 1-1:1.8: usb_probe_interface[297] needs_remote_wakeup:0
  234.  
  235. <6>[ 17.143323] c0 28 mdm_hsic_usb_device_add_handler(702) USB device added 2 <Qualcomm, Incorporated Qualcomm CDMA Technologies MSM>
  236.  
  237. <6>[ 17.143323] c0 28 mdm_hsic_usb_device_add_handler: usb 1-1 found
  238.  
  239. <6>[ 17.143354] c0 28 mdm_hsic_usb_device_add_handler: msm_hsic_host_dev:c0d67988
  240.  
  241. <6>[ 17.143354] c0 28 usb 1-1: udev(1-1)->enable_pm_debug=[0]
  242.  
  243. <6>[ 17.162734] c3 973 [LS][cm3629] lightsensor_open
  244.  
  245. <6>[ 17.162765] c3 973 [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_GET_ENABLED, enabled 0
  246.  
  247. <6>[ 17.162795] c3 973 [LS][cm3629] lightsensor_release
  248.  
  249. <6>[ 17.163222] c3 973 [PS][cm3629] psensor_open
  250.  
  251. <6>[ 17.163222] c3 973 [PS][cm3629] psensor_ioctl cmd 1
  252.  
  253. <7>[ 17.163863] c3 973 [TIMERIRQ]timerirq_open: current->pid 973
  254.  
  255. <6>[ 17.164108] c3 973 MPL-accODR: 0
  256.  
  257. <6>[ 17.164138] c3 973 MPL-accODR: 31250
  258.  
  259. <7>[ 17.164291] c3 973 gyro_gsensor_kvalue[0] = 0x67
  260.  
  261. <7>[ 17.164321] c3 973 gyro_gsensor_kvalue[1] = 0x0
  262.  
  263. <7>[ 17.164321] c3 973 gyro_gsensor_kvalue[2] = 0x0
  264.  
  265. <7>[ 17.164321] c3 973 gyro_gsensor_kvalue[3] = 0x0
  266.  
  267. <7>[ 17.164321] c3 973 gyro_gsensor_kvalue[4] = 0x24
  268.  
  269. <7>[ 17.164321] c3 973 gyro_gsensor_kvalue[5] = 0x0
  270.  
  271. <7>[ 17.164352] c3 973 gyro_gsensor_kvalue[6] = 0x5
  272.  
  273. <7>[ 17.164352] c3 973 gyro_gsensor_kvalue[7] = 0xc8
  274.  
  275. <7>[ 17.164352] c3 973 gyro_gsensor_kvalue[8] = 0x85
  276.  
  277. <7>[ 17.164352] c3 973 gyro_gsensor_kvalue[9] = 0x0
  278.  
  279. <7>[ 17.164352] c3 973 gyro_gsensor_kvalue[10] = 0x0
  280.  
  281. <7>[ 17.164382] c3 973 gyro_gsensor_kvalue[11] = 0x1d
  282.  
  283. <7>[ 17.164382] c3 973 gyro_gsensor_kvalue[12] = 0x2e
  284.  
  285. <7>[ 17.164382] c3 973 gyro_gsensor_kvalue[13] = 0x0
  286.  
  287. <7>[ 17.164382] c3 973 gyro_gsensor_kvalue[14] = 0x0
  288.  
  289. <7>[ 17.164382] c3 973 gyro_gsensor_kvalue[15] = 0x49
  290.  
  291. <7>[ 17.164413] c3 973 gyro_gsensor_kvalue[16] = 0xec
  292.  
  293. <7>[ 17.164413] c3 973 gyro_gsensor_kvalue[17] = 0x0
  294.  
  295. <7>[ 17.164413] c3 973 gyro_gsensor_kvalue[18] = 0x2
  296.  
  297. <7>[ 17.164413] c3 973 gyro_gsensor_kvalue[19] = 0xa3
  298.  
  299. <7>[ 17.164413] c3 973 gyro_gsensor_kvalue[20] = 0x6
  300.  
  301. <7>[ 17.164443] c3 973 gyro_gsensor_kvalue[21] = 0x0
  302.  
  303. <7>[ 17.164443] c3 973 gyro_gsensor_kvalue[22] = 0x0
  304.  
  305. <7>[ 17.16
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!