API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Oct 30th, 2014
101
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 47.13 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.11.0-26-generic (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #45-Ubuntu SMP Tue Jul 15 04:04:15 UTC 2014 (Ubuntu 3.11.0-26.45-generic 3.11.10.12)
  5. [ 0.000000] KERNEL supported cpus:
  6. [ 0.000000] Intel GenuineIntel
  7. [ 0.000000] AMD AuthenticAMD
  8. [ 0.000000] NSC Geode by NSC
  9. [ 0.000000] Cyrix CyrixInstead
  10. [ 0.000000] Centaur CentaurHauls
  11. [ 0.000000] Transmeta GenuineTMx86
  12. [ 0.000000] Transmeta TransmetaCPU
  13. [ 0.000000] UMC UMC UMC UMC
  14. [ 0.000000] e820: BIOS-provided physical RAM map:
  15. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
  16. [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6affff] usable
  19. [ 0.000000] BIOS-e820: [mem 0x000000003f6b0000-0x000000003f6bbfff] ACPI data
  20. [ 0.000000] BIOS-e820: [mem 0x000000003f6bc000-0x000000003f6befff] ACPI NVS
  21. [ 0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003fffffff] reserved
  22. [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  23. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
  24. [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
  25. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  26. [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
  27. [ 0.000000] NX (Execute Disable) protection: active
  28. [ 0.000000] SMBIOS 2.5 present.
  29. [ 0.000000] DMI: CompuLab CM-iAM/SBC-FITPC2i/CM-iAM/SBC-FITPC2i, BIOS NAPA0001.86C.0000.D.1009141059 09/14/2010
  30. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  31. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  32. [ 0.000000] e820: last_pfn = 0x3f6b0 max_arch_pfn = 0x1000000
  33. [ 0.000000] MTRR default type: uncachable
  34. [ 0.000000] MTRR fixed ranges enabled:
  35. [ 0.000000] 00000-9FFFF write-back
  36. [ 0.000000] A0000-BFFFF uncachable
  37. [ 0.000000] C0000-CFFFF write-protect
  38. [ 0.000000] D0000-DFFFF uncachable
  39. [ 0.000000] E0000-FFFFF write-protect
  40. [ 0.000000] MTRR variable ranges enabled:
  41. [ 0.000000] 0 base 000000000 mask 0C0000000 write-back
  42. [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
  43. [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
  44. [ 0.000000] 3 disabled
  45. [ 0.000000] 4 disabled
  46. [ 0.000000] 5 disabled
  47. [ 0.000000] 6 disabled
  48. [ 0.000000] 7 disabled
  49. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  50. [ 0.000000] original variable MTRRs
  51. [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
  52. [ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
  53. [ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
  54. [ 0.000000] total RAM covered: 1015M
  55. [ 0.000000] Found optimal setting for mtrr clean up
  56. [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
  57. [ 0.000000] New variable MTRRs
  58. [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
  59. [ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
  60. [ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
  61. [ 0.000000] found SMP MP-table at [mem 0x000f8600-0x000f860f] mapped at [c00f8600]
  62. [ 0.000000] Scanning 1 areas for low memory corruption
  63. [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
  64. [ 0.000000] Base memory trampoline at [c008c000] 8c000 size 16384
  65. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  66. [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
  67. [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
  68. [ 0.000000] [mem 0x37800000-0x379fffff] page 2M
  69. [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
  70. [ 0.000000] [mem 0x34000000-0x377fffff] page 2M
  71. [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
  72. [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
  73. [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
  74. [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
  75. [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
  76. [ 0.000000] BRK [0x01b4c000, 0x01b4cfff] PGTABLE
  77. [ 0.000000] RAMDISK: [mem 0x35df0000-0x36eeffff]
  78. [ 0.000000] ACPI: RSDP 000f85d0 00024 (v02 PTLTD )
  79. [ 0.000000] ACPI: XSDT 3f6b77e1 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
  80. [ 0.000000] ACPI: FACP 3f6bbdb0 000F4 (v03 INTEL POULSBO 06040000 INTC 00000032)
  81. [ 0.000000] ACPI: DSDT 3f6b803a 03CF2 (v01 INTEL POULSBO 06040000 INTL 20050624)
  82. [ 0.000000] ACPI: FACS 3f6befc0 00040
  83. [ 0.000000] ACPI: HPET 3f6bbea4 00038 (v01 INTEL POULSBO 06040000 INTC 00000032)
  84. [ 0.000000] ACPI: MCFG 3f6bbedc 0003C (v01 INTEL POULSBO 06040000 INTC 00000032)
  85. [ 0.000000] ACPI: TCPA 3f6bbf18 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
  86. [ 0.000000] ACPI: TMOR 3f6bbf4a 00026 (v01 PTLTD 06040000 PTL 00000003)
  87. [ 0.000000] ACPI: APIC 3f6bbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
  88. [ 0.000000] ACPI: BOOT 3f6bbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
  89. [ 0.000000] ACPI: SSDT 3f6b7845 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
  90. [ 0.000000] ACPI: Local APIC address 0xfee00000
  91. [ 0.000000] 122MB HIGHMEM available.
  92. [ 0.000000] 891MB LOWMEM available.
  93. [ 0.000000] mapped low ram: 0 - 37bfe000
  94. [ 0.000000] low ram: 0 - 37bfe000
  95. [ 0.000000] BRK [0x01b4d000, 0x01b4dfff] PGTABLE
  96. [ 0.000000] Zone ranges:
  97. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  98. [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
  99. [ 0.000000] HighMem [mem 0x37bfe000-0x3f6affff]
  100. [ 0.000000] Movable zone start for each node
  101. [ 0.000000] Early memory node ranges
  102. [ 0.000000] node 0: [mem 0x00001000-0x0008ffff]
  103. [ 0.000000] node 0: [mem 0x00100000-0x3f6affff]
  104. [ 0.000000] On node 0 totalpages: 259647
  105. [ 0.000000] free_area_init_node: node 0, pgdat c195ae80, node_mem_map f740e020
  106. [ 0.000000] DMA zone: 32 pages used for memmap
  107. [ 0.000000] DMA zone: 0 pages reserved
  108. [ 0.000000] DMA zone: 3983 pages, LIFO batch:0
  109. [ 0.000000] Normal zone: 1752 pages used for memmap
  110. [ 0.000000] Normal zone: 224254 pages, LIFO batch:31
  111. [ 0.000000] HighMem zone: 246 pages used for memmap
  112. [ 0.000000] HighMem zone: 31410 pages, LIFO batch:7
  113. [ 0.000000] Using APIC driver default
  114. [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
  115. [ 0.000000] ACPI: Local APIC address 0xfee00000
  116. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  117. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  118. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  119. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  120. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  121. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  122. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  123. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  124. [ 0.000000] ACPI: IRQ0 used by override.
  125. [ 0.000000] ACPI: IRQ2 used by override.
  126. [ 0.000000] ACPI: IRQ9 used by override.
  127. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  128. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  129. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  130. [ 0.000000] nr_irqs_gsi: 40
  131. [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
  132. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
  133. [ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
  134. [ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
  135. [ 0.000000] Booting paravirtualized kernel on bare hardware
  136. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
  137. [ 0.000000] PERCPU: Embedded 14 pages/cpu @f73ec000 s36288 r0 d21056 u57344
  138. [ 0.000000] pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
  139. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  140. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257863
  141. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-26-generic root=/dev/mapper/darwin-root ro video=LVDS-1:d
  142. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  143. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  144. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  145. [ 0.000000] Initializing CPU#0
  146. [ 0.000000] allocated 2078072 bytes of page_cgroup
  147. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  148. [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003f6b0)
  149. [ 0.000000] Memory: 998436K/1038588K available (6370K kernel code, 612K rwdata, 2692K rodata, 880K init, 908K bss, 40152K reserved, 125640K highmem)
  150. [ 0.000000] virtual kernel memory layout:
  151. [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
  152. [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
  153. [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
  154. [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
  155. [ 0.000000] .init : 0xc1975000 - 0xc1a51000 ( 880 kB)
  156. [ 0.000000] .data : 0xc1638cb4 - 0xc19742c0 (3309 kB)
  157. [ 0.000000] .text : 0xc1000000 - 0xc1638cb4 (6371 kB)
  158. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  159. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  160. [ 0.000000] Hierarchical RCU implementation.
  161. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  162. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  163. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
  164. [ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
  165. [ 0.000000] Console: colour dummy device 80x25
  166. [ 0.000000] console [tty0] enabled
  167. [ 0.000000] hpet clockevent registered
  168. [ 0.000000] tsc: Fast TSC calibration using PIT
  169. [ 0.000000] tsc: Detected 1596.036 MHz processor
  170. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.07 BogoMIPS (lpj=6384144)
  171. [ 0.004026] pid_max: default: 32768 minimum: 301
  172. [ 0.004115] Security Framework initialized
  173. [ 0.004157] AppArmor: AppArmor initialized
  174. [ 0.004168] Yama: becoming mindful.
  175. [ 0.004292] Mount-cache hash table entries: 512
  176. [ 0.004795] Initializing cgroup subsys memory
  177. [ 0.004832] Initializing cgroup subsys devices
  178. [ 0.004844] Initializing cgroup subsys freezer
  179. [ 0.004855] Initializing cgroup subsys blkio
  180. [ 0.004866] Initializing cgroup subsys perf_event
  181. [ 0.004880] Initializing cgroup subsys hugetlb
  182. [ 0.004942] CPU: Physical Processor ID: 0
  183. [ 0.004953] CPU: Processor Core ID: 0
  184. [ 0.004965] mce: CPU supports 5 MCE banks
  185. [ 0.004987] CPU0: Thermal monitoring enabled (TM1)
  186. [ 0.005019] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
  187. [ 0.005019] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
  188. [ 0.005019] tlb_flushall_shift: 6
  189. [ 0.005494] Freeing SMP alternatives memory: 28K (c1a51000 - c1a58000)
  190. [ 0.009442] ACPI: Core revision 20130517
  191. [ 0.014938] ACPI: All ACPI Tables successfully acquired
  192. [ 0.016024] ftrace: allocating 27213 entries in 54 pages
  193. [ 0.036206] Enabling APIC mode: Flat. Using 1 I/O APICs
  194. [ 0.036608] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  195. [ 0.078274] smpboot: CPU0: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
  196. [ 0.080000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
  197. [ 0.080000] ... version: 3
  198. [ 0.080000] ... bit width: 40
  199. [ 0.080000] ... generic registers: 2
  200. [ 0.080000] ... value mask: 000000ffffffffff
  201. [ 0.080000] ... max period: 000000007fffffff
  202. [ 0.080000] ... fixed-purpose events: 3
  203. [ 0.080000] ... event mask: 0000000700000003
  204. [ 0.080576] CPU 1 irqstacks, hard=f58f0000 soft=f58f2000
  205. [ 0.080584] smpboot: Booting Node 0, Processors #1 OK
  206. [ 0.008000] Initializing CPU#1
  207. [ 0.092121] Brought up 2 CPUs
  208. [ 0.092143] smpboot: Total of 2 processors activated (6384.14 BogoMIPS)
  209. [ 0.092304] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  210. [ 0.092995] devtmpfs: initialized
  211. [ 0.092995] EVM: security.selinux
  212. [ 0.092995] EVM: security.SMACK64
  213. [ 0.092995] EVM: security.capability
  214. [ 0.092995] PM: Registering ACPI NVS region [mem 0x3f6bc000-0x3f6befff] (12288 bytes)
  215. [ 0.097242] regulator-dummy: no parameters
  216. [ 0.097307] RTC time: 10:43:32, date: 10/30/14
  217. [ 0.097428] NET: Registered protocol family 16
  218. [ 0.097832] EISA bus registered
  219. [ 0.097962] ACPI: bus type PCI registered
  220. [ 0.097975] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  221. [ 0.098139] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  222. [ 0.098158] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  223. [ 0.098167] PCI: Using MMCONFIG for extended config space
  224. [ 0.098176] PCI: Using configuration type 1 for base access
  225. [ 0.101410] bio: create slab <bio-0> at 0
  226. [ 0.101410] ACPI: Added _OSI(Module Device)
  227. [ 0.101410] ACPI: Added _OSI(Processor Device)
  228. [ 0.101410] ACPI: Added _OSI(3.0 _SCP Extensions)
  229. [ 0.101410] ACPI: Added _OSI(Processor Aggregator Device)
  230. [ 0.104140] ACPI: EC: Look up EC in DSDT
  231. [ 0.107554] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  232. [ 0.108363] ACPI: SSDT 3f6b7d21 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
  233. [ 0.108858] ACPI: Dynamic OEM Table Load:
  234. [ 0.108871] ACPI: SSDT (null) 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
  235. [ 0.109456] ACPI: SSDT 3f6b7f66 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
  236. [ 0.109930] ACPI: Dynamic OEM Table Load:
  237. [ 0.109943] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
  238. [ 0.312098] ACPI: Interpreter enabled
  239. [ 0.312125] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
  240. [ 0.312147] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
  241. [ 0.312193] ACPI: (supports S0 S3 S4 S5)
  242. [ 0.312204] ACPI: Using IOAPIC for interrupt routing
  243. [ 0.312287] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  244. [ 0.312528] ACPI: No dock devices found.
  245. [ 0.314487] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  246. [ 0.314550] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  247. [ 0.325163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  248. [ 0.325190] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
  249. [ 0.325205] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
  250. [ 0.325516] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d0000-0x000fffff])
  251. [ 0.325808] PCI host bridge to bus 0000:00
  252. [ 0.325823] pci_bus 0000:00: root bus resource [bus 00-ff]
  253. [ 0.325835] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  254. [ 0.325847] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  255. [ 0.325858] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  256. [ 0.325871] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
  257. [ 0.325883] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
  258. [ 0.325895] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xfebfffff]
  259. [ 0.325925] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000
  260. [ 0.326190] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000
  261. [ 0.326222] pci 0000:00:02.0: reg 0x10: [mem 0xb0080000-0xb00fffff]
  262. [ 0.326237] pci 0000:00:02.0: reg 0x14: [io 0x1810-0x1817]
  263. [ 0.326252] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff]
  264. [ 0.326268] pci 0000:00:02.0: reg 0x1c: [mem 0xb0000000-0xb003ffff]
  265. [ 0.326549] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300
  266. [ 0.326576] pci 0000:00:1b.0: reg 0x10: [mem 0xb0050000-0xb0053fff 64bit]
  267. [ 0.326661] pci 0000:00:1b.0: PME# supported from D0 D3hot
  268. [ 0.326854] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400
  269. [ 0.326945] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  270. [ 0.327142] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300
  271. [ 0.327195] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
  272. [ 0.327365] pci 0000:00:1d.0: System wakeup disabled by ACPI
  273. [ 0.327467] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300
  274. [ 0.327520] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
  275. [ 0.327683] pci 0000:00:1d.1: System wakeup disabled by ACPI
  276. [ 0.327788] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300
  277. [ 0.327841] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
  278. [ 0.328018] pci 0000:00:1d.2: System wakeup disabled by ACPI
  279. [ 0.328142] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320
  280. [ 0.328179] pci 0000:00:1d.7: reg 0x10: [mem 0xb0054000-0xb00543ff]
  281. [ 0.328314] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  282. [ 0.328427] pci 0000:00:1d.7: System wakeup disabled by ACPI
  283. [ 0.328527] pci 0000:00:1e.0: [8086:811c] type 00 class 0x080501
  284. [ 0.328549] pci 0000:00:1e.0: reg 0x10: [mem 0xb0054400-0xb00544ff]
  285. [ 0.328776] pci 0000:00:1e.1: [8086:811d] type 00 class 0x080501
  286. [ 0.328798] pci 0000:00:1e.1: reg 0x10: [mem 0xb0054800-0xb00548ff]
  287. [ 0.329020] pci 0000:00:1e.2: [8086:811e] type 00 class 0x080501
  288. [ 0.329041] pci 0000:00:1e.2: reg 0x10: [mem 0xb0054c00-0xb0054cff]
  289. [ 0.329275] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100
  290. [ 0.329514] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180
  291. [ 0.329567] pci 0000:00:1f.1: reg 0x20: [io 0x1800-0x180f]
  292. [ 0.329909] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
  293. [ 0.329937] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
  294. [ 0.329977] pci 0000:02:00.0: reg 0x18: [mem 0xd0000000-0xd0000fff 64bit]
  295. [ 0.330003] pci 0000:02:00.0: reg 0x20: [mem 0xd0100000-0xd010ffff 64bit pref]
  296. [ 0.330023] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
  297. [ 0.330107] pci 0000:02:00.0: supports D1 D2
  298. [ 0.330114] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  299. [ 0.330178] pci 0000:02:00.0: System wakeup disabled by ACPI
  300. [ 0.336037] pci 0000:00:1c.0: PCI bridge to [bus 02]
  301. [ 0.336053] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
  302. [ 0.336062] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff]
  303. [ 0.336071] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff pref]
  304. [ 0.336086] pci_bus 0000:00: on NUMA node 0
  305. [ 0.336560] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
  306. [ 0.336750] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
  307. [ 0.336936] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
  308. [ 0.337121] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
  309. [ 0.337306] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  310. [ 0.337495] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  311. [ 0.337681] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  312. [ 0.337872] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  313. [ 0.338506] ACPI: Enabled 6 GPEs in block 00 to 1F
  314. [ 0.338541] ACPI: \_SB_.PCI0: notify handler is installed
  315. [ 0.338630] Found 1 acpi root devices
  316. [ 0.338734] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
  317. [ 0.338995] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  318. [ 0.338995] vgaarb: loaded
  319. [ 0.338995] vgaarb: bridge control possible 0000:00:02.0
  320. [ 0.338995] SCSI subsystem initialized
  321. [ 0.338995] ACPI: bus type ATA registered
  322. [ 0.338995] libata version 3.00 loaded.
  323. [ 0.338995] ACPI: bus type USB registered
  324. [ 0.338995] usbcore: registered new interface driver usbfs
  325. [ 0.338995] usbcore: registered new interface driver hub
  326. [ 0.340039] usbcore: registered new device driver usb
  327. [ 0.340192] PCI: Using ACPI for IRQ routing
  328. [ 0.348730] PCI: pci_cache_line_size set to 64 bytes
  329. [ 0.348794] Expanded resource reserved due to conflict with PCI Bus 0000:00
  330. [ 0.348808] e820: reserve RAM buffer [mem 0x3f6b0000-0x3fffffff]
  331. [ 0.349095] NetLabel: Initializing
  332. [ 0.349106] NetLabel: domain hash size = 128
  333. [ 0.349114] NetLabel: protocols = UNLABELED CIPSOv4
  334. [ 0.349145] NetLabel: unlabeled traffic allowed by default
  335. [ 0.349204] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  336. [ 0.349204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  337. [ 0.349204] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  338. [ 0.352047] Switched to clocksource hpet
  339. [ 0.368601] AppArmor: AppArmor Filesystem Enabled
  340. [ 0.368706] pnp: PnP ACPI init
  341. [ 0.368764] ACPI: bus type PNP registered
  342. [ 0.369194] system 00:00: [mem 0xfd000000-0xfd003fff] has been reserved
  343. [ 0.369212] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
  344. [ 0.369226] system 00:00: [mem 0xfed00000-0xfed3ffff] could not be reserved
  345. [ 0.369239] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  346. [ 0.369252] system 00:00: [mem 0xfed45000-0xfed4bfff] has been reserved
  347. [ 0.369269] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  348. [ 0.369719] pnp 00:01: [dma 4]
  349. [ 0.369790] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  350. [ 0.369897] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  351. [ 0.370068] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  352. [ 0.370167] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  353. [ 0.370317] system 00:05: [io 0x0295-0x0296] has been reserved
  354. [ 0.370333] system 00:05: [io 0x0680-0x069f] has been reserved
  355. [ 0.370347] system 00:05: [io 0x8080] has been reserved
  356. [ 0.370359] system 00:05: [io 0x1000-0x107f] could not be reserved
  357. [ 0.370372] system 00:05: [io 0x1180-0x11bf] has been reserved
  358. [ 0.370385] system 00:05: [io 0x1640-0x164f] has been reserved
  359. [ 0.370399] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  360. [ 0.370528] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  361. [ 0.370825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  362. [ 0.370983] pnp: PnP ACPI: found 8 devices
  363. [ 0.370995] ACPI: bus type PNP unregistered
  364. [ 0.371008] PnPBIOS: Disabled by ACPI PNP
  365. [ 0.412241] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
  366. [ 0.412266] pci 0000:00:1c.0: PCI bridge to [bus 02]
  367. [ 0.412279] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
  368. [ 0.412296] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff]
  369. [ 0.412310] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff pref]
  370. [ 0.412596] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  371. [ 0.412604] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  372. [ 0.412611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  373. [ 0.412618] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
  374. [ 0.412625] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
  375. [ 0.412631] pci_bus 0000:00: resource 9 [mem 0x3f800000-0xfebfffff]
  376. [ 0.412639] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
  377. [ 0.412645] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
  378. [ 0.412652] pci_bus 0000:02: resource 2 [mem 0xd0100000-0xd01fffff pref]
  379. [ 0.412742] NET: Registered protocol family 2
  380. [ 0.413118] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  381. [ 0.413193] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  382. [ 0.413259] TCP: Hash tables configured (established 8192 bind 8192)
  383. [ 0.413322] TCP: reno registered
  384. [ 0.413336] UDP hash table entries: 512 (order: 2, 16384 bytes)
  385. [ 0.413359] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  386. [ 0.413524] NET: Registered protocol family 1
  387. [ 0.413571] pci 0000:00:02.0: Boot video device
  388. [ 0.415199] PCI: CLS 64 bytes, default 64
  389. [ 0.415331] Trying to unpack rootfs image as initramfs...
  390. [ 1.235837] Freeing initrd memory: 17408K (f5df0000 - f6ef0000)
  391. [ 1.235970] Simple Boot Flag at 0x36 set to 0x1
  392. [ 1.236343] Scanning for low memory corruption every 60 seconds
  393. [ 1.236984] Initialise module verification
  394. [ 1.237111] audit: initializing netlink socket (disabled)
  395. [ 1.237146] type=2000 audit(1414665812.236:1): initialized
  396. [ 1.292536] bounce pool size: 64 pages
  397. [ 1.292584] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  398. [ 1.296426] zbud: loaded
  399. [ 1.296604] VFS: Disk quotas dquot_6.5.2
  400. [ 1.296745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  401. [ 1.298240] fuse init (API version 7.22)
  402. [ 1.298495] msgmni has been set to 1738
  403. [ 1.299648] Key type asymmetric registered
  404. [ 1.299665] Asymmetric key parser 'x509' registered
  405. [ 1.299786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  406. [ 1.299907] io scheduler noop registered
  407. [ 1.299923] io scheduler deadline registered (default)
  408. [ 1.300060] io scheduler cfq registered
  409. [ 1.300432] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  410. [ 1.300492] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  411. [ 1.300733] intel_idle: MWAIT substates: 0x3020220
  412. [ 1.300751] intel_idle: v0.4 model 0x1C
  413. [ 1.300756] intel_idle: lapic_timer_reliable_states 0x2
  414. [ 1.300762] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
  415. [ 1.300992] ACPI: AC Adapter [ADP1] (on-line)
  416. [ 1.301260] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  417. [ 1.301282] ACPI: Power Button [PWRB]
  418. [ 1.301409] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  419. [ 1.301426] ACPI: Power Button [PWRF]
  420. [ 1.301443] ACPI Error: Could not enable PowerButton event (20130517/evxfevnt-211)
  421. [ 1.301461] ACPI Warning: Could not enable fixed event - PowerButton (2) (20130517/evxface-488)
  422. [ 1.340134] button: probe of LNXPWRBN:00 failed with error -22
  423. [ 1.340299] ACPI: Requesting acpi_cpufreq
  424. [ 1.344415] thermal LNXTHERM:00: registered as thermal_zone0
  425. [ 1.344432] ACPI: Thermal Zone [TZ00] (0 C)
  426. [ 1.345035] ACPI: Invalid active0 threshold
  427. [ 1.345493] thermal LNXTHERM:01: registered as thermal_zone1
  428. [ 1.345506] ACPI: Thermal Zone [TZ01] (0 C)
  429. [ 1.345601] GHES: HEST is not enabled!
  430. [ 1.345637] ACPI: Battery Slot [BAT0] (battery absent)
  431. [ 1.345720] ACPI: Battery Slot [BAT1] (battery absent)
  432. [ 1.345806] ACPI: Battery Slot [BAT2] (battery absent)
  433. [ 1.345906] isapnp: Scanning for PnP cards...
  434. [ 1.345963] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  435. [ 1.350909] Linux agpgart interface v0.103
  436. [ 1.356250] brd: module loaded
  437. [ 1.358942] loop: module loaded
  438. [ 1.360831] libphy: Fixed MDIO Bus: probed
  439. [ 1.361334] tun: Universal TUN/TAP device driver, 1.6
  440. [ 1.361347] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  441. [ 1.361512] PPP generic driver version 2.4.2
  442. [ 1.361687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  443. [ 1.361702] ehci-pci: EHCI PCI platform driver
  444. [ 1.362076] ehci-pci 0000:00:1d.7: setting latency timer to 64
  445. [ 1.362099] ehci-pci 0000:00:1d.7: EHCI Host Controller
  446. [ 1.362125] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
  447. [ 1.362168] ehci-pci 0000:00:1d.7: debug port 1
  448. [ 1.366106] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
  449. [ 1.366170] ehci-pci 0000:00:1d.7: irq 21, io mem 0xb0054000
  450. [ 1.376041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  451. [ 1.376141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  452. [ 1.376159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  453. [ 1.376176] usb usb1: Product: EHCI Host Controller
  454. [ 1.376190] usb usb1: Manufacturer: Linux 3.11.0-26-generic ehci_hcd
  455. [ 1.376204] usb usb1: SerialNumber: 0000:00:1d.7
  456. [ 1.376582] hub 1-0:1.0: USB hub found
  457. [ 1.376605] hub 1-0:1.0: 8 ports detected
  458. [ 1.377507] ehci-platform: EHCI generic platform driver
  459. [ 1.377561] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  460. [ 1.377574] ohci-pci: OHCI PCI platform driver
  461. [ 1.377624] ohci-platform: OHCI generic platform driver
  462. [ 1.377662] uhci_hcd: USB Universal Host Controller Interface driver
  463. [ 1.377992] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  464. [ 1.378003] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  465. [ 1.378028] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  466. [ 1.378122] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
  467. [ 1.378233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  468. [ 1.378251] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  469. [ 1.378269] usb usb2: Product: UHCI Host Controller
  470. [ 1.378282] usb usb2: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
  471. [ 1.378296] usb usb2: SerialNumber: 0000:00:1d.0
  472. [ 1.378668] hub 2-0:1.0: USB hub found
  473. [ 1.378695] hub 2-0:1.0: 2 ports detected
  474. [ 1.379195] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  475. [ 1.379205] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  476. [ 1.379230] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  477. [ 1.379317] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
  478. [ 1.379422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  479. [ 1.379439] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  480. [ 1.379457] usb usb3: Product: UHCI Host Controller
  481. [ 1.379470] usb usb3: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
  482. [ 1.379485] usb usb3: SerialNumber: 0000:00:1d.1
  483. [ 1.379797] hub 3-0:1.0: USB hub found
  484. [ 1.379819] hub 3-0:1.0: 2 ports detected
  485. [ 1.380375] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  486. [ 1.380386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  487. [ 1.380416] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  488. [ 1.380507] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
  489. [ 1.380614] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  490. [ 1.380631] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  491. [ 1.380648] usb usb4: Product: UHCI Host Controller
  492. [ 1.380662] usb usb4: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
  493. [ 1.380676] usb usb4: SerialNumber: 0000:00:1d.2
  494. [ 1.381002] hub 4-0:1.0: USB hub found
  495. [ 1.381023] hub 4-0:1.0: 2 ports detected
  496. [ 1.381507] i8042: PNP: No PS/2 controller found. Probing ports directly.
  497. [ 1.383640] serio: i8042 KBD port at 0x60,0x64 irq 1
  498. [ 1.383669] serio: i8042 AUX port at 0x60,0x64 irq 12
  499. [ 1.384121] mousedev: PS/2 mouse device common for all mice
  500. [ 1.384441] rtc_cmos 00:06: RTC can wake from S4
  501. [ 1.384697] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  502. [ 1.384747] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  503. [ 1.385001] device-mapper: uevent: version 1.0.3
  504. [ 1.385224] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
  505. [ 1.385313] platform eisa.0: Probing EISA bus 0
  506. [ 1.385337] platform eisa.0: EISA: Cannot allocate resource for mainboard
  507. [ 1.385355] platform eisa.0: Cannot allocate resource for EISA slot 1
  508. [ 1.385372] platform eisa.0: Cannot allocate resource for EISA slot 2
  509. [ 1.385388] platform eisa.0: Cannot allocate resource for EISA slot 3
  510. [ 1.385404] platform eisa.0: Cannot allocate resource for EISA slot 4
  511. [ 1.385421] platform eisa.0: Cannot allocate resource for EISA slot 5
  512. [ 1.385437] platform eisa.0: Cannot allocate resource for EISA slot 6
  513. [ 1.385454] platform eisa.0: Cannot allocate resource for EISA slot 7
  514. [ 1.385470] platform eisa.0: Cannot allocate resource for EISA slot 8
  515. [ 1.385484] platform eisa.0: EISA: Detected 0 cards
  516. [ 1.385509] cpufreq-nforce2: No nForce2 chipset.
  517. [ 1.385691] cpuidle: using governor ladder
  518. [ 1.385914] cpuidle: using governor menu
  519. [ 1.385963] ledtrig-cpu: registered to indicate activity on CPUs
  520. [ 1.386252] TCP: cubic registered
  521. [ 1.386626] NET: Registered protocol family 10
  522. [ 1.387248] NET: Registered protocol family 17
  523. [ 1.387289] Key type dns_resolver registered
  524. [ 1.387822] Using IPI No-Shortcut mode
  525. [ 1.388245] PM: Hibernation image not present or could not be loaded.
  526. [ 1.388259] Loading module verification certificates
  527. [ 1.402526] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d18b49de7a179451dd34a839bda3e74d89eb4752'
  528. [ 1.402575] registered taskstats version 1
  529. [ 1.403369] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
  530. [ 1.411430] Key type trusted registered
  531. [ 1.419436] Key type encrypted registered
  532. [ 1.427632] AppArmor: AppArmor sha1 policy hashing enabled
  533. [ 1.428085] regulator-dummy: disabling
  534. [ 1.428266] Magic number: 2:25:731
  535. [ 1.428420] rtc_cmos 00:06: setting system clock to 2014-10-30 10:43:33 UTC (1414665813)
  536. [ 1.429647] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  537. [ 1.429664] EDD information not available.
  538. [ 1.700410] isapnp: No Plug & Play device found
  539. [ 1.701385] Freeing unused kernel memory: 880K (c1975000 - c1a51000)
  540. [ 1.701538] Write protecting the kernel text: 6372k
  541. [ 1.701703] Write protecting the kernel read-only data: 2696k
  542. [ 1.701715] NX-protecting the kernel data: 5916k
  543. [ 1.738253] systemd-udevd[96]: starting version 204
  544. [ 1.866168] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  545. [ 1.866224] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
  546. [ 1.866643] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
  547. [ 1.867192] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xf840c000, 00:01:c0:0c:43:d8, XID 1c4000c0 IRQ 40
  548. [ 1.867219] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
  549. [ 1.877053] sdhci: Secure Digital Host Controller Interface driver
  550. [ 1.877075] sdhci: Copyright(c) Pierre Ossman
  551. [ 1.898665] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:811c] (rev 7)
  552. [ 1.899112] sdhci-pci 0000:00:1e.0: setting latency timer to 64
  553. [ 1.899125] mmc0: no vqmmc regulator found
  554. [ 1.899140] mmc0: no vmmc regulator found
  555. [ 1.899211] sdhci-pci 0000:00:1e.0: setting latency timer to 64
  556. [ 1.899439] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA
  557. [ 1.899479] sdhci-pci 0000:00:1e.1: SDHCI controller found [8086:811d] (rev 7)
  558. [ 1.899827] sdhci-pci 0000:00:1e.1: setting latency timer to 64
  559. [ 1.899837] mmc1: no vqmmc regulator found
  560. [ 1.899851] mmc1: no vmmc regulator found
  561. [ 1.899912] sdhci-pci 0000:00:1e.1: setting latency timer to 64
  562. [ 1.900152] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA
  563. [ 1.900190] sdhci-pci 0000:00:1e.2: SDHCI controller found [8086:811e] (rev 7)
  564. [ 1.900506] sdhci-pci 0000:00:1e.2: setting latency timer to 64
  565. [ 1.900516] mmc2: no vqmmc regulator found
  566. [ 1.900529] mmc2: no vmmc regulator found
  567. [ 1.900559] sdhci-pci 0000:00:1e.2: setting latency timer to 64
  568. [ 1.900738] mmc2: SDHCI controller on PCI [0000:00:1e.2] using DMA
  569. [ 1.921358] pata_sch 0000:00:1f.1: version 0.2
  570. [ 1.921459] pata_sch 0000:00:1f.1: setting latency timer to 64
  571. [ 1.924754] scsi0 : pata_sch
  572. [ 1.927647] scsi1 : pata_sch
  573. [ 1.927946] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14
  574. [ 1.927969] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15
  575. [ 1.952088] usb 1-7: new high-speed USB device number 3 using ehci-pci
  576. [ 2.101756] usb 1-7: New USB device found, idVendor=148f, idProduct=3070
  577. [ 2.101777] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  578. [ 2.101790] usb 1-7: Product: 802.11 n WLAN
  579. [ 2.101800] usb 1-7: Manufacturer: Ralink
  580. [ 2.101810] usb 1-7: SerialNumber: 1.0
  581. [ 2.212051] usb 1-8: new high-speed USB device number 4 using ehci-pci
  582. [ 2.562620] usb 1-8: New USB device found, idVendor=046d, idProduct=080a
  583. [ 2.562636] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=2
  584. [ 2.562649] usb 1-8: SerialNumber: D9B8CAA0
  585. [ 2.800068] usb 3-2: new full-speed USB device number 2 using uhci_hcd
  586. [ 2.998232] usb 3-2: New USB device found, idVendor=0403, idProduct=6001
  587. [ 2.998248] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  588. [ 2.998261] usb 3-2: Product: FT232R USB UART
  589. [ 2.998271] usb 3-2: Manufacturer: FTDI
  590. [ 2.998281] usb 3-2: SerialNumber: A4008alx
  591. [ 3.060379] ata1.00: CFA: 4GB NANDrive, ND B642J, max UDMA/66
  592. [ 3.060399] ata1.00: 8000496 sectors, multi 0: LBA
  593. [ 3.084325] ata1.00: configured for UDMA/66
  594. [ 3.084647] scsi 0:0:0:0: Direct-Access ATA 4GB NANDrive ND B PQ: 0 ANSI: 5
  595. [ 3.085351] sd 0:0:0:0: Attached scsi generic sg0 type 0
  596. [ 3.085409] sd 0:0:0:0: [sda] 8000496 512-byte logical blocks: (4.09 GB/3.81 GiB)
  597. [ 3.085798] sd 0:0:0:0: [sda] Write Protect is off
  598. [ 3.085823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  599. [ 3.085944] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  600. [ 3.088193] sda: sda1 sda2 < sda5 >
  601. [ 3.089311] sd 0:0:0:0: [sda] Attached SCSI disk
  602. [ 3.473200] bio: create slab <bio-1> at 1
  603. [ 3.649527] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  604. [ 6.474053] Adding 1036284k swap on /dev/mapper/darwin-swap_1. Priority:-1 extents:1 across:1036284k FS
  605. [ 6.522181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  606. [ 6.779935] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
  607. [ 6.784742] systemd-udevd[292]: starting version 204
  608. [ 7.035778] lp: driver loaded but no devices found
  609. [ 7.556346] [drm] Initialized drm 1.1.0 20060810
  610. [ 7.690079] type=1400 audit(1414665819.755:2): apparmor="STATUS" operation="profile_load" parent=354 profile="unconfined" name="/sbin/dhclient" pid=359 comm="apparmor_parser"
  611. [ 7.690106] type=1400 audit(1414665819.755:3): apparmor="STATUS" operation="profile_load" parent=354 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
  612. [ 7.690127] type=1400 audit(1414665819.755:4): apparmor="STATUS" operation="profile_load" parent=354 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
  613. [ 7.711178] type=1400 audit(1414665819.775:5): apparmor="STATUS" operation="profile_replace" parent=354 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=359 comm="apparmor_parser"
  614. [ 7.711215] type=1400 audit(1414665819.775:6): apparmor="STATUS" operation="profile_replace" parent=354 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
  615. [ 7.712767] type=1400 audit(1414665819.779:7): apparmor="STATUS" operation="profile_replace" parent=354 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=359 comm="apparmor_parser"
  616. [ 7.745880] init: Failed to spawn binfmt-support main process: unable to execute: No such file or directory
  617. [ 7.768140] gma500 0000:00:02.0: setting latency timer to 64
  618. [ 7.862347] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  619. [ 7.945882] usbcore: registered new interface driver usbserial
  620. [ 7.945945] usbcore: registered new interface driver usbserial_generic
  621. [ 7.946040] usbserial: USB Serial support registered for generic
  622. [ 7.987995] Linux video capture interface: v2.00
  623. [ 8.021811] acpi device:05: registered as cooling_device2
  624. [ 8.084616] acpi device:06: registered as cooling_device3
  625. [ 8.084731] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  626. [ 8.085004] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
  627. [ 8.085432] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  628. [ 8.085440] [drm] No driver support for vblank timestamp query.
  629. [ 8.094655] usbcore: registered new interface driver ftdi_sio
  630. [ 8.094710] usbserial: USB Serial support registered for FTDI USB Serial Device
  631. [ 8.094947] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
  632. [ 8.095053] usb 3-2: Detected FT232RL
  633. [ 8.095061] usb 3-2: Number of endpoints 2
  634. [ 8.095069] usb 3-2: Endpoint 1 MaxPacketSize 64
  635. [ 8.095077] usb 3-2: Endpoint 2 MaxPacketSize 64
  636. [ 8.095085] usb 3-2: Setting MaxPacketSize 64
  637. [ 8.389178] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080a)
  638. [ 8.538437] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
  639. [ 8.686251] Raw EDID:
  640. [ 8.686273] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  641. [ 8.686288] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  642. [ 8.686301] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  643. [ 8.686315] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  644. [ 8.686329] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  645. [ 8.686343] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  646. [ 8.686356] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  647. [ 8.686370] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  648. [ 8.686393] gma500 0000:00:02.0: LVDS-1: EDID block 0 invalid.
  649. [ 8.780348] input: UVC Camera (046d:080a) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input4
  650. [ 8.792782] r8169 0000:02:00.0 eth0: link down
  651. [ 8.800113] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  652. [ 8.811930] usbcore: registered new interface driver uvcvideo
  653. [ 8.811939] USB Video Class driver (1.1.1)
  654. [ 8.840410] cfg80211: Calling CRDA to update world regulatory domain
  655. [ 9.475831] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x211
  656. [ 9.674748] init: avahi-cups-reload main process (509) terminated with status 1
  657. [ 10.546731] [drm] forcing LVDS-1 connector OFF
  658. [ 10.561414] usb 1-7: reset high-speed USB device number 3 using ehci-pci
  659. [ 10.597997] gma500 0000:00:02.0: No connectors reported connected with modes
  660. [ 10.598148] [drm] Cannot find any crtc or sizes - going 1024x768
  661. [ 10.619944] fbcon: psbdrmfb (fb0) is primary device
  662. [ 10.741872] Console: switching to colour frame buffer device 128x48
  663. [ 10.756459] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
  664. [ 10.756465] gma500 0000:00:02.0: registered panic notifier
  665. [ 10.759236] gma500 0000:00:02.0: Backlight lvds set brightness 7a120000
  666. [ 10.759260] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
  667. [ 10.788070] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
  668. [ 10.936377] hda_codec: ALC662 rev1: SKU not ready 0x411111f0
  669. [ 10.936841] autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
  670. [ 10.936852] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  671. [ 10.936859] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  672. [ 10.936864] mono: mono_out=0x0
  673. [ 10.936869] dig-out=0x1e/0x0
  674. [ 10.936873] inputs:
  675. [ 10.936881] Front Mic=0x19
  676. [ 10.936887] Rear Mic=0x18
  677. [ 10.936893] Line=0x1a
  678. [ 10.936900] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
  679. [ 10.936904] realtek: Enable default setup for auto mode as fallback
  680. [ 11.032127] usb_audio: Warning! Unlikely big volume range (=6400), cval->res is probably wrong.
  681. [ 11.032139] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7936/1<6>[ 11.035240] usbcore: registered new interface driver snd-usb-audio
  682. [ 11.127017] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
  683. [ 11.169098] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
  684. [ 11.171838] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
  685. [ 11.178739] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
  686. [ 11.185193] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  687. [ 11.199445] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
  688. [ 11.200392] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  689. [ 11.202121] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  690. [ 11.203438] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  691. [ 11.206276] usbcore: registered new interface driver rt2800usb
  692. [ 11.440889] init: failsafe main process (633) killed by TERM signal
  693. [ 12.013697] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x211
  694. [ 12.282109] type=1400 audit(1414665824.347:8): apparmor="STATUS" operation="profile_replace" parent=782 profile="unconfined" name="/sbin/dhclient" pid=787 comm="apparmor_parser"
  695. [ 12.282148] type=1400 audit(1414665824.347:9): apparmor="STATUS" operation="profile_replace" parent=782 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
  696. [ 12.282174] type=1400 audit(1414665824.347:10): apparmor="STATUS" operation="profile_replace" parent=782 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
  697. [ 12.292697] type=1400 audit(1414665824.359:11): apparmor="STATUS" operation="profile_replace" parent=782 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
  698. [ 12.347418] cfg80211: World regulatory domain updated:
  699. [ 12.347432] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  700. [ 12.347441] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  701. [ 12.347450] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  702. [ 12.347457] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  703. [ 12.347464] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  704. [ 12.347472] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  705. [ 12.510380] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  706. [ 12.800724] kvm: disabled by bios
  707. [ 12.922206] kvm: disabled by bios
  708. [ 14.379343] Netfilter messages via NETLINK v0.30.
  709. [ 14.668938] init: Failed to spawn whoopsie main process: unable to execute: No such file or directory
  710. [ 14.697223] init: isc-dhcp-server pre-start process (923) terminated with status 127
  711. [ 15.945173] uvcvideo: Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2).
  712. [ 15.950564] uvcvideo: Failed to query (SET_CUR) UVC control 10 on unit 2: -32 (exp. 2).
  713. [ 17.452643] hda-intel: Invalid position buffer, using LPIB read method instead.
  714. [ 17.497725] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  715. [ 17.500531] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
  716. [ 17.884495] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  717. [ 30.812735] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  718. [ 32.052926] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  719. [ 36.297705] wlan0: authenticate with a0:21:b7:c9:ab:0f
  720. [ 36.401379] wlan0: send auth to a0:21:b7:c9:ab:0f (try 1/3)
  721. [ 36.407045] wlan0: authenticated
  722. [ 36.408103] wlan0: associate with a0:21:b7:c9:ab:0f (try 1/3)
  723. [ 36.414344] wlan0: RX AssocResp from a0:21:b7:c9:ab:0f (capab=0x411 status=0 aid=4)
  724. [ 36.427195] wlan0: associated
  725. [ 36.427291] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!