API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 12th, 2013
179
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.53 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.10.4 (jar@jar-virtual-machine) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 unknown) ) #1 SMP Fri Aug 9 14:26:20 CEST 2013
  2. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  3. [ 0.000000] CPU frequency is 400 MHz
  4. [ 0.000000] 64MB of RAM installed
  5. [ 0.000000] registering 38 GPIOs
  6. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  7. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-110.11-1
  8. [ 0.000000] bootconsole [early0] enabled
  9. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  10. [ 0.000000] board_bcm963xx: board name: 96368M-1541N
  11. [ 0.000000] Determined physical RAM map:
  12. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  13. [ 0.000000] Initrd not found or empty - disabling initrd
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  19. [ 0.000000] On node 0 totalpages: 16384
  20. [ 0.000000] free_area_init_node: node 0, pgdat 803149e0, node_mem_map 81000000
  21. [ 0.000000] Normal zone: 128 pages used for memmap
  22. [ 0.000000] Normal zone: 0 pages reserved
  23. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  24. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  25. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  26. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s6624 r8192 d13856 u32768
  27. [ 0.000000] pcpu-alloc: s6624 r8192 d13856 u32768 alloc=8*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  29. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  30. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  31. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  34. [ 0.000000] Memory: 61140k/65536k available (2538k kernel code, 4396k reserved, 625k data, 288k init, 0k highmem)
  35. [ 0.000000] Hierarchical RCU implementation.
  36. [ 0.000000] NR_IRQS:128
  37. [ 0.028000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  38. [ 0.032000] pid_max: default: 32768 minimum: 301
  39. [ 0.036000] Mount-cache hash table entries: 512
  40. [ 0.044000] SMP: Booting CPU1...
  41. [ 0.048000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  42. [ 0.048000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  43. [ 0.048000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  44. [ 0.080000] SMP: CPU1 is running
  45. [ 0.080000] Brought up 2 CPUs
  46. [ 0.116000] NET: Registered protocol family 16
  47. [ 0.128000] registering PCI controller with io_map_base unset
  48. [ 0.152000] bio: create slab <bio-0> at 0
  49. [ 0.160000] PCI host bridge to bus 0000:00
  50. [ 0.164000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  51. [ 0.168000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  52. [ 0.172000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  53. [ 0.176000] pci 0000:00:01.0: [14e4:a8d6] type 00 class 0x028000
  54. [ 0.176000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff]
  55. [ 0.188000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  56. [ 0.188000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  57. [ 0.192000] Switching to clocksource MIPS
  58. [ 0.204000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  59. [ 0.212000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
  60. [ 0.232000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
  61. [ 0.240000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x1E, vendor 0x4243)
  62. [ 0.240000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
  63. [ 0.240000] ssb: Core 2 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
  64. [ 0.296000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  65. [ 0.304000] NET: Registered protocol family 2
  66. [ 0.312000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  67. [ 0.316000] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
  68. [ 0.324000] TCP: Hash tables configured (established 512 bind 512)
  69. [ 0.332000] TCP: reno registered
  70. [ 0.336000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  71. [ 0.340000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  72. [ 0.348000] NET: Registered protocol family 1
  73. [ 0.352000] PCI: CLS 0 bytes, default 16
  74. [ 0.356000] audit: initializing netlink socket (disabled)
  75. [ 0.360000] type=2000 audit(0.356:1): initialized
  76. [ 0.368000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  77. [ 0.372000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  78. [ 0.384000] msgmni has been set to 119
  79. [ 0.388000] io scheduler noop registered
  80. [ 0.392000] io scheduler deadline registered (default)
  81. [ 0.400000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
  82. [ 0.408000] console [ttyS0] enabled, bootconsole disabled
  83. [ 0.424000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  84. [ 0.432000] physmap platform flash device: 08000000 at 18000000
  85. [ 0.436000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  86. [ 0.448000] Amd/Fujitsu Extended Query Table at 0x0040
  87. [ 0.452000] Amd/Fujitsu Extended Query version 1.3.
  88. [ 0.460000] number of CFI chips: 1
  89. [ 0.464000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1541N
  90. [ 0.472000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  91. [ 0.476000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
  92. [ 0.484000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length 1ea0000
  93. [ 0.492000] bcm63xxpart: Partition 3 is nvram offset 1fe0000 and length 20000
  94. [ 0.500000] bcm63xxpart: Partition 4 is linux offset 20000 and length 1fc0000
  95. [ 0.508000] bcm63xxpart: Spare partition is offset 5e0004 and length 19ffffc
  96. [ 0.516000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  97. [ 0.520000] Creating 5 MTD partitions on "physmap-flash.0":
  98. [ 0.528000] 0x000000000000-0x000000020000 : "CFE"
  99. [ 0.536000] 0x000000020100-0x000000140000 : "kernel"
  100. [ 0.540000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  101. [ 0.556000] 0x000000140000-0x000001fe0000 : "rootfs"
  102. [ 0.564000] mtd: partition "rootfs" set to be root filesystem
  103. [ 0.568000] mtd: partition "rootfs_data" created automatically, ofs=0x5e0000, len=0x1a00000
  104. [ 0.580000] 0x0000005e0000-0x000001fe0000 : "rootfs_data"
  105. [ 0.588000] 0x000001fe0000-0x000002000000 : "nvram"
  106. [ 0.596000] 0x000000020000-0x000001fe0000 : "linux"
  107. [ 0.604000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  108. [ 0.652000] b53_common: found switch: BCM63xx, rev 0
  109. [ 0.660000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  110. [ 0.672000] TCP: cubic registered
  111. [ 0.672000] NET: Registered protocol family 17
  112. [ 0.680000] 8021q: 802.1Q VLAN Support v1.8
  113. [ 0.692000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  114. [ 0.704000] Freeing unused kernel memory: 288K (80328000 - 80370000)
  115. [ 2.824000] SCSI subsystem initialized
  116. [ 3.032000] usbcore: registered new interface driver usbfs
  117. [ 3.036000] usbcore: registered new interface driver hub
  118. [ 3.044000] usbcore: registered new device driver usb
  119. [ 3.228000] Button Hotplug driver version 0.4.1
  120. [ 3.968000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  121. [ 3.976000] ehci-platform: EHCI generic platform driver
  122. [ 4.084000] ehci-platform ehci-platform: EHCI Host Controller
  123. [ 4.088000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  124. [ 4.096000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  125. [ 4.116000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  126. [ 4.124000] hub 1-0:1.0: USB hub found
  127. [ 4.128000] hub 1-0:1.0: 2 ports detected
  128. [ 4.188000] usbcore: registered new interface driver usb-storage
  129. [ 4.200000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  130. [ 4.460000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  131. [ 4.604000] usb-storage 1-1:1.0: USB Mass Storage device detected
  132. [ 4.612000] scsi0 : usb-storage 1-1:1.0
  133. [ 5.620000] scsi 0:0:0:0: Direct-Access USB0912B Flash Disk 8.07 PQ: 0 ANSI: 2
  134. [ 5.636000] sd 0:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
  135. [ 5.644000] sd 0:0:0:0: [sda] Write Protect is off
  136. [ 5.648000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
  137. [ 5.652000] sd 0:0:0:0: [sda] No Caching mode page present
  138. [ 5.656000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  139. [ 5.668000] sd 0:0:0:0: [sda] No Caching mode page present
  140. [ 5.676000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  141. [ 6.116000] sda: sda1 sda2
  142. [ 6.128000] sd 0:0:0:0: [sda] No Caching mode page present
  143. [ 6.132000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  144. [ 6.140000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  145. [ 7.948000] jffs2: notice: (256) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 14 of xref (0 dead, 0 orphan) found.
  146. [ 11.420000] NET: Registered protocol family 10
  147. [ 12.664000] wl: module license 'unspecified' taints kernel.
  148. [ 12.672000] Disabling lock debugging due to kernel taint
  149. [ 12.780000] SSB/BCMA glue driver successfully attached
  150. [ 13.044000] PPP generic driver version 2.4.2
  151. [ 13.388000] ip_tables: (C) 2000-2006 Netfilter Core Team
  152. [ 13.420000] xt_time: kernel timezone is -0000
  153. [ 13.648000] NET: Registered protocol family 24
  154. [ 13.772000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
  155. [ 14.800000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  156. [ 14.960000] usbcore: registered new interface driver usblp
  157. [ 15.092000] usbcore: registered new interface driver ums-alauda
  158. [ 15.100000] usbcore: registered new interface driver ums-cypress
  159. [ 15.112000] usbcore: registered new interface driver ums-datafab
  160. [ 15.124000] usbcore: registered new interface driver ums-freecom
  161. [ 15.180000] usbcore: registered new interface driver ums-isd200
  162. [ 15.192000] usbcore: registered new interface driver ums-jumpshot
  163. [ 15.204000] usbcore: registered new interface driver ums-karma
  164. [ 15.216000] usbcore: registered new interface driver ums-sddr09
  165. [ 15.228000] usbcore: registered new interface driver ums-sddr55
  166. [ 15.240000] usbcore: registered new interface driver ums-usbat
  167. [ 17.996000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  168. [ 19.264000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  169. [ 19.276000] device eth0.1 entered promiscuous mode
  170. [ 19.284000] device eth0 entered promiscuous mode
  171. [ 19.288000] br-lan: port 1(eth0.1) entered forwarding state
  172. [ 19.296000] br-lan: port 1(eth0.1) entered forwarding state
  173. [ 21.300000] br-lan: port 1(eth0.1) entered forwarding state
  174. [ 27.096000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
  175. [ 27.120000] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
  176. [ 27.132000] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
  177. [ 27.156000] Adding 524284k swap on /dev/sda1. Priority:-1 extents:1 across:524284k
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!