# generated by Slic3r 1.2.6 on Sun Feb 15 18:55:11 2015
avoid_crossing_perimeters = 1
bottom_solid_layers = 3
bridge_acceleration = 500
bridge_flow_ratio = 1.25
bridge_speed = 25
brim_width = 0
complete_objects = 0
default_acceleration = 1500
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 220%
fill_angle = 45
fill_density = 40%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 125%
first_layer_speed = 30%
gap_fill_speed = 30
gcode_comments = 0
infill_acceleration = 3000
infill_every_layers = 2
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 70
interface_shells = 0
layer_height = 0.2
min_skirt_length = 5
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]([layer_height]).g
overhangs = 1
perimeter_acceleration = 500
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 2
post_process =
raft_layers = 0
resolution = 0.001
seam_position = aligned
skirt_distance = 1
skirt_height = 1
skirts = 1
small_perimeter_speed = 80%
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 50%
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0.3
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 70
support_material_threshold = 45
thin_walls = 0
threads = 5
top_infill_extrusion_width = 0
top_solid_infill_speed = 50%
top_solid_layers = 3
travel_speed = 100
xy_size_compensation = 0